* PROBLEM: Performance drop
@ 2012-05-23 19:12 Comrade DOS
2012-05-24 12:31 ` Andreas Herrmann
0 siblings, 1 reply; 14+ messages in thread
From: Comrade DOS @ 2012-05-23 19:12 UTC (permalink / raw)
To: linux-kernel
PROBLEM: Performance drop
After the release of linux 3.4.0 I've updated the kernel on all my machines.
In most of the computer upgrade was successful.
However, on my old laptop (HP Compaq 6715b) after the upgrade was just
impossible to work.
I found that CPU frequency scaling no longer work properly on this machine.
After loading the CPU clock is reset to the minimum (800 MHz), and
remains so until you reboot.
Changing the type of governor is not helping.
Recompile the kernel without CPU frequency scaling has been to solve
the problem, but even after this performance leaves much to be desired
(although, according to /proc/cpuinfo CPU frequency set maximum).
In addition to the above-described problems, there is another - the
problem with rebooting and shutting down (and possibly also have a
problem with s2ram and/or s2disk, but I'm their functionality I have
not tested).
If you try to shut down or restart the laptop it hangs.
Information about my system (according to
http://kernel.org/pub/linux/docs/lkml/reporting-bugs.html):
/proc/version
Linux version 3.4.0 (root@dos) (gcc version 4.6.3 (Gentoo 4.6.3 p1.0,
pie-0.5.1) ) #1 SMP PREEMPT Thu May 24 01:02:36 OMST 2012
ver_linux
Linux dos 3.4.0 #1 SMP PREEMPT Thu May 24 01:02:36 OMST 2012 x86_64
Mobile AMD Sempron(tm) Processor 3800+ AuthenticAMD GNU/Linux
Gnu C 4.6.3
Gnu make 3.82
binutils 2.22
util-linux ./ver_linux: line 23: fdformat: command not found
mount support
module-init-tools found
Linux C Library 2.15
Dynamic linker (ldd) 2.15
Procps UNKNOWN
Net-tools 1.60_p20120127084908
Kbd 1.15.3wip
Sh-utils 8.17
Modules Loaded aes_generic af_packet btusb bluetooth usbhid
b43 mac80211 cfg80211 rng_core ehci_hcd ohci_hcd tg3 usbcore libphy
ssb snd_hda_codec_analog sr_mod cdrom usb_common snd_hda_intel
snd_hda_codec snd_pcm snd_page_alloc snd_timer snd k8temp hp_accel
lis3lv02d input_polldev evdev unix
/proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 76
model name : Mobile AMD Sempron(tm) Processor 3800+
stepping : 2
cpu MHz : 800.000
cache size : 256 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt rdtscp
lm 3dnowext 3dnow up rep_good nopl extd_apicid pni cx16 lahf_lm
extapic cr8_legacy
bogomips : 1596.02
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc
/proc/modules
aes_generic 25914 1 - Live 0xffffffffa00e5000
af_packet 25220 2 - Live 0xffffffffa007b000
btusb 10857 0 - Live 0xffffffffa008a000
bluetooth 179115 2 btusb, Live 0xffffffffa021c000
usbhid 18009 0 - Live 0xffffffffa003e000
b43 166907 0 - Live 0xffffffffa0169000
mac80211 197519 1 b43, Live 0xffffffffa0137000
cfg80211 161332 2 b43,mac80211, Live 0xffffffffa010e000
rng_core 3278 1 b43, Live 0xffffffffa000a000
ehci_hcd 39899 0 - Live 0xffffffffa0103000
ohci_hcd 20351 0 - Live 0xffffffffa0012000
tg3 133841 0 - Live 0xffffffffa01cd000
usbcore 124556 4 btusb,usbhid,ehci_hcd,ohci_hcd, Live 0xffffffffa00c5000
libphy 15486 1 tg3, Live 0xffffffffa00c0000
ssb 34730 1 b43, Live 0xffffffffa00b1000
snd_hda_codec_analog 75936 1 - Live 0xffffffffa0098000
sr_mod 13991 0 - Live 0xffffffffa0064000
cdrom 34578 1 sr_mod, Live 0xffffffffa008e000
usb_common 785 1 usbcore, Live 0xffffffffa0008000
snd_hda_intel 21683 0 - Live 0xffffffffa0083000
snd_hda_codec 58276 2 snd_hda_codec_analog,snd_hda_intel, Live
0xffffffffa006b000
snd_pcm 64122 2 snd_hda_intel,snd_hda_codec, Live 0xffffffffa0053000
snd_page_alloc 6609 2 snd_hda_intel,snd_pcm, Live 0xffffffffa004e000
snd_timer 17914 1 snd_pcm, Live 0xffffffffa0045000
snd 52542 5 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer,
Live 0xffffffffa0030000
k8temp 3211 0 - Live 0xffffffffa002c000
hp_accel 16008 0 - Live 0xffffffffa0025000
lis3lv02d 9820 1 hp_accel, Live 0xffffffffa001e000
input_polldev 2498 1 lis3lv02d, Live 0xffffffffa000c000
evdev 9178 6 - Live 0xffffffffa000e000
unix 26105 110 - Live 0xffffffffa0000000
/proc/ioports
0000-0cf7 : PCI Bus 0000:00
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-0060 : keyboard
0062-0062 : EC data
0064-0064 : keyboard
0066-0066 : EC cmd
0070-0071 : rtc0
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:14.1
0170-0177 : pata_atiixp
01f0-01f7 : 0000:00:14.1
01f0-01f7 : pata_atiixp
0376-0376 : 0000:00:14.1
0376-0376 : pata_atiixp
03c0-03df : vga+
03f6-03f6 : 0000:00:14.1
03f6-03f6 : pata_atiixp
040b-040b : pnp 00:09
04d0-04d1 : pnp 00:09
04d6-04d6 : pnp 00:09
0500-053f : pnp 00:09
0c00-0c01 : pnp 00:09
0c14-0c14 : pnp 00:09
0c50-0c51 : pnp 00:09
0c52-0c52 : pnp 00:09
0c6c-0c6c : pnp 00:09
0c6f-0c6f : pnp 00:09
0cd0-0cdf : pnp 00:09
0cf8-0cff : PCI conf1
0d00-ffff : PCI Bus 0000:00
1000-1fff : PCI Bus 0000:02
1000-10ff : PCI CardBus 0000:03
1400-14ff : PCI CardBus 0000:03
2000-3fff : PCI Bus 0000:20
4000-4fff : PCI Bus 0000:01
4000-40ff : 0000:01:05.0
5018-501b : 0000:00:12.0
5018-501b : ahci
5020-502f : 0000:00:12.0
5020-502f : ahci
5040-504f : 0000:00:14.1
5040-504f : pata_atiixp
8000-802f : pnp 00:0b
8000-8003 : ACPI PM1a_EVT_BLK
8004-8005 : ACPI PM1a_CNT_BLK
8008-800b : ACPI PM_TMR
8010-8015 : ACPI CPU throttle
8020-8027 : ACPI GPE0_BLK
8100-811f : pnp 00:0b
8104-8107 : ACPI PM1b_EVT_BLK
8200-820f : 0000:00:14.0
8800-8800 : ACPI PM2_CNT_BLK
9000-9007 : 0000:00:12.0
9000-9007 : ahci
9008-900b : 0000:00:12.0
9008-900b : ahci
9010-9017 : 0000:00:12.0
9010-9017 : ahci
/proc/iomem
00000000-0000ffff : reserved
00010000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000c0000-000cd3ff : Video ROM
000cd400-000cffff : pnp 00:0c
000d0000-000dffff : PCI Bus 0000:00
000e0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-b7faffff : System RAM
01000000-014319b1 : Kernel code
014319b2-0161427f : Kernel data
01686000-01715fff : Kernel bss
ac000000-afffffff : GART
b7fb0000-b7fc7fff : reserved
b7fc8000-b7fe7fb7 : ACPI Non-volatile Storage
b7fe7fb8-bfffffff : reserved
c0000000-fedfffff : PCI Bus 0000:00
c0000000-c7ffffff : PCI Bus 0000:01
c0000000-c7ffffff : 0000:01:05.0
c8000000-c80fffff : PCI Bus 0000:30
c8000000-c8003fff : 0000:30:00.0
c8000000-c8003fff : 0000:30:00.0
c8100000-c8103fff : 0000:00:14.2
c8100000-c8103fff : ICH HD audio
cc000000-cfffffff : PCI Bus 0000:20
d0000000-d00fffff : PCI Bus 0000:10
d0000000-d000ffff : 0000:10:00.0
d0000000-d000ffff : tg3
d0100000-d03fffff : PCI Bus 0000:02
d0100000-d0100fff : 0000:02:04.0
d0101000-d01017ff : 0000:02:04.1
d0400000-d05fffff : PCI Bus 0000:01
d0400000-d040ffff : 0000:01:05.0
d0500000-d05fffff : 0000:01:05.0
d0601000-d0601fff : 0000:00:13.0
d0601000-d0601fff : ohci_hcd
d0602000-d0602fff : 0000:00:13.1
d0602000-d0602fff : ohci_hcd
d0603000-d0603fff : 0000:00:13.2
d0603000-d0603fff : ohci_hcd
d0604000-d0604fff : 0000:00:13.3
d0604000-d0604fff : ohci_hcd
d0605000-d0605fff : 0000:00:13.4
d0605000-d0605fff : ohci_hcd
d0606000-d06060ff : 0000:00:13.5
d0606000-d06060ff : ehci_hcd
d0609000-d06093ff : 0000:00:12.0
d0609000-d06093ff : ahci
d4000000-d7ffffff : PCI Bus 0000:02
d4000000-d7ffffff : PCI CardBus 0000:03
d8000000-dbffffff : PCI CardBus 0000:03
e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff]
e0000000-efffffff : reserved
e0000000-efffffff : pnp 00:0b
fec00000-fec01fff : reserved
fec00000-fec003ff : IOAPIC 0
fed45000-fed8ffff : pnp 00:0b
fee00000-fee00fff : Local APIC
fee00000-fee00fff : pnp 00:0c
fee01000-ffffffff : PCI Bus 0000:00
ffbc0000-ffcbffff : reserved
fff00000-ffffffff : reserved
fff00000-ffffffff : pnp 00:09
100000000-13fffffff : System RAM
lspci -vvv
00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RS690 Host Bridge
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS690 PCI to
PCI Bridge (Internal gfx) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0400000-d05fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30c2
00:04.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI Device 7914
(prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: d0000000-d00fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4159
Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30c2
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:05.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS690 PCI to
PCI Bridge (PCI Express Port 1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: cc000000-cfffffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #247, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4161
Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30c2
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:06.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS690 PCI to
PCI Bridge (PCI Express Port 2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=30, subordinate=30, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: c8000000-c80fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<64ns, L1 <1us
ClockPM- Surprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+
BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
Slot #0, PowerLimit 0.000W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4169
Capabilities: [b0] Subsystem: Hewlett-Packard Company Device 30c2
Capabilities: [b8] HyperTransport: MSI Mapping Enable+ Fixed+
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Kernel driver in use: pcieport
00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600
Non-Raid-5 SATA (prog-if 01 [AHCI 1.0])
Subsystem: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9008 [size=4]
Region 2: I/O ports at 9010 [size=8]
Region 3: I/O ports at 5018 [size=4]
Region 4: I/O ports at 5020 [size=16]
Region 5: Memory at d0609000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ahci
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI0) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0601000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI1) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0602000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI2) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at d0603000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI3) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0604000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI4) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at d0605000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB
Controller (EHCI) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 23
Region 0: Memory at d0606000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci_hcd
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller (rev 14)
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8200 [size=16]
Capabilities: [b0] HyperTransport: MSI Mapping Enable- Fixed+
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE
(prog-if 82 [Master PriP])
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 5040 [size=16]
Kernel driver in use: pata_atiixp
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00
Azalia (Intel HDA)
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c8100000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=03, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d0100000-d03fffff
Prefetchable memory behind bridge: d4000000-d7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
Command: WarmRst+ DblEnd- DevNum=0 ChainSide- HostHide+ Slave- <EOCErr- DUL-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=8
IsocEn- LSEn+ ExtCTL- 64b+
Link Config: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit
DwFcInEn- LWO=16bit DwFcOutEn-
Revision ID: 1.02
Link Frequency: 800MHz
Link Error: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability: 200MHz+ 300MHz- 400MHz+ 500MHz- 600MHz+
800MHz+ 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC- LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD- ExtRS- UCnfE-
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8
[Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee
ATI RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at d0400000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 4000 [size=256]
Region 5: Memory at d0500000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: d4000000-d7ffffff (prefetchable)
Memory window 1: d8000000-dbffffff
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+
Postpcilib: sysfs_read_vpd: read failed: Connection timed out
Write+
16-bit legacy interface ports at 0001
02:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
(rev 02) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 5
Region 0: Memory at d0101000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M
Gigabit Ethernet PCI Express (rev 02)
Subsystem: Hewlett-Packard Company Device 30c2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Not readable
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [e8] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 4189
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0
<4us, L1 <64us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number 00-1a-4b-ff-fe-76-46-6e
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: tg3
30:00.0 Network controller: Broadcom Corporation BCM4311 802.11a/b/g (rev 02)
Subsystem: Hewlett-Packard Company Broadcom 802.11a/b/g WLAN
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c8000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [40] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Vendor Specific Information: Len=78 <?>
Capabilities: [e8] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <4us, L1 <64us
ClockPM- Surprise+ LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive-
BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF-
MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+
MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
Capabilities: [13c v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
Status: NegoPending- InProgress-
Capabilities: [160 v1] Device Serial Number d6-9a-73-ff-ff-b5-00-1a
Capabilities: [16c v1] Power Budgeting <?>
Kernel driver in use: b43-pci-bridge
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST9120822AS Rev: 3.BH
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 00 Lun: 00
Vendor: MATSHITA Model: DVD-RAM UJ-860H Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 05
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: PROBLEM: Performance drop 2012-05-23 19:12 PROBLEM: Performance drop Comrade DOS @ 2012-05-24 12:31 ` Andreas Herrmann [not found] ` <CA+fU7qfPznJpRABC4Z=xmRZW6p5Mw3dFLBySk9HuPnaCYMMnEg@mail.gmail.com> 0 siblings, 1 reply; 14+ messages in thread From: Andreas Herrmann @ 2012-05-24 12:31 UTC (permalink / raw) To: Comrade DOS; +Cc: linux-kernel On Thu, May 24, 2012 at 02:12:39AM +0700, Comrade DOS wrote: > PROBLEM: Performance drop > > After the release of linux 3.4.0 I've updated the kernel on all my machines. > In most of the computer upgrade was successful. > However, on my old laptop (HP Compaq 6715b) after the upgrade was just > impossible to work. > I found that CPU frequency scaling no longer work properly on this machine. > After loading the CPU clock is reset to the minimum (800 MHz), and > remains so until you reboot. > Changing the type of governor is not helping. > Recompile the kernel without CPU frequency scaling has been to solve > the problem, but even after this performance leaves much to be desired > (although, according to /proc/cpuinfo CPU frequency set maximum). > In addition to the above-described problems, there is another - the > problem with rebooting and shutting down (and possibly also have a > problem with s2ram and/or s2disk, but I'm their functionality I have > not tested). > If you try to shut down or restart the laptop it hangs. This somehow reminds me of commit 26adcfbf00e0726b4469070aa2f530dcf963f484 (x86: SB600: skip ACPI IRQ0 override if it is not routed to INT2 of IOAPIC). See also https://bugzilla.kernel.org/show_bug.cgi?id=11715 and https://bugzilla.kernel.org/show_bug.cgi?id=11516 Question is why the quirk doesn't work (anymore) on your system. What was the kernel release used before 3.4.0 was install on your Laptop? Please provide dmesg with apic=debug kernel option when kernel 3.4 is booted? Can you please try to boot with kernel paramter acpi_use_timer_override in another test run and with acpi_skip_timer_override in a 3rd test (and also using acpi=debug in both cases) and provide dmesg output for those testruns. Thanks, Andreas ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <CA+fU7qfPznJpRABC4Z=xmRZW6p5Mw3dFLBySk9HuPnaCYMMnEg@mail.gmail.com>]
* PROBLEM: Performance drop [not found] ` <CA+fU7qfPznJpRABC4Z=xmRZW6p5Mw3dFLBySk9HuPnaCYMMnEg@mail.gmail.com> @ 2012-05-26 6:11 ` Comrade DOS [not found] ` <20120529140940.GA10421@alberich.amd.com> 1 sibling, 0 replies; 14+ messages in thread From: Comrade DOS @ 2012-05-26 6:11 UTC (permalink / raw) To: linux-kernel ---------- Forwarded message ---------- From: Comrade DOS <suloevdmitry@gmail.com> Date: 2012/5/24 Subject: Re: PROBLEM: Performance drop To: Andreas Herrmann <herrmann.der.user@googlemail.com> > What was the kernel release used before 3.4.0 was install on your > Laptop? I rollback to linux 3.3.5. It's work fine on this laptop. > Please provide dmesg with apic=debug kernel option when kernel 3.4 is > booted? Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.0 (root@dos) (gcc version 4.6.3 (Gentoo 4.6.3 p1.0, pie-0.5.1) ) #2 SMP PREEMPT Thu May 24 22:49:31 OMST 2012 Command line: root=/dev/sda3 acpi=debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Malformed early option 'acpi' NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 SB600 revision 0x14 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71744 r8192 d22464 u1048576 pcpu-alloc: s71744 r8192 d22464 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 acpi=debug PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ ac000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853536k/5242880k available (4382k kernel code, 1180420k absent, 208924k reserved, 1971k data, 432k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2194.526 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4389.05 BogoMIPS (lpj=2194526) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4389.05 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xb7fc8000-0xb7fe7fb7] (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 pci 0000:00:01.0: [1002:7912] type 01 class 0x060400 pci 0000:00:04.0: [1002:7914] type 01 class 0x060400 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 00 class 0x010182 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:01:05.0: [1002:791f] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 00 class 0x020000 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1337876856.453:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (62 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (50 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP: cubic registered ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 432k freed NET: Registered protocol family 1 udevd[810]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found microcode: AMD CPU family 0xf not supported input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded ssb: Found chip with id 0x4311, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 tg3.c:v3.123 (March 21, 2012) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 cfg80211: Calling CRDA to update world regulatory domain tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after hda-codec: No codec parser is available ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 b43-phy0: Broadcom 4311 WLAN found (core revision 13) Broadcom 43xx driver loaded [ Features: P ] hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' usb 4-1: new full-speed USB device number 2 using ohci_hcd usb 1-2: new full-speed USB device number 2 using ohci_hcd usb 3-1: new low-speed USB device number 2 using ohci_hcd Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usbcore: registered new interface driver btusb input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver EXT4-fs (sda3): re-mounted. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 wlan0: send auth to 00:21:91:82:3c:30 (try 1/3) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1/3) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1 > Can you please try to boot with kernel paramter > acpi_use_timer_override in another test run and with Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.0 (root@dos) (gcc version 4.6.3 (Gentoo 4.6.3 p1.0, pie-0.5.1) ) #2 SMP PREEMPT Thu May 24 22:49:31 OMST 2012 Command line: root=/dev/sda3 acpi=debug acpi_use_timer_override BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Malformed early option 'acpi' NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 Detected use of extended apic ids on hypertransport bus ------------[ cut here ]------------ WARNING: at arch/x86/kernel/acpi/boot.c:1346 dmi_ignore_irq0_timer_override+0x27/0x47() Hardware name: HP Compaq 6715b (GB833EA#ACB) ati_ixp4x0 quirk not complete. Modules linked in: Pid: 0, comm: swapper Not tainted 3.4.0 #2 Call Trace: [<ffffffff8164ee08>] ? dmi_ignore_irq0_timer_override+0x27/0x47 [<ffffffff8102e05b>] ? warn_slowpath_common+0x7b/0xc0 [<ffffffff8102e155>] ? warn_slowpath_fmt+0x45/0x50 [<ffffffff8164ee08>] ? dmi_ignore_irq0_timer_override+0x27/0x47 [<ffffffff8138f9b3>] ? dmi_check_system+0x33/0x50 [<ffffffff8164f5d7>] ? acpi_boot_init+0x10/0x34c [<ffffffff81649bb5>] ? setup_arch+0x6da/0x763 [<ffffffff81648820>] ? start_kernel+0x86/0x2e9 ---[ end trace 4eaa2a86a8e2da22 ]--- HP 6715b laptop detected: Ignoring BIOS IRQ0 pin2 override ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71744 r8192 d22464 u1048576 pcpu-alloc: s71744 r8192 d22464 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 acpi=debug acpi_use_timer_override PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 8000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853536k/5242880k available (4382k kernel code, 1180420k absent, 208924k reserved, 1971k data, 432k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2193.768 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4387.53 BogoMIPS (lpj=2193768) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4387.53 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xb7fc8000-0xb7fe7fb7] (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 pci 0000:00:01.0: [1002:7912] type 01 class 0x060400 pci 0000:00:04.0: [1002:7914] type 01 class 0x060400 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 00 class 0x010182 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:01:05.0: [1002:791f] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 00 class 0x020000 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1337877078.452:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (64 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (51 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP: cubic registered ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 432k freed NET: Registered protocol family 1 udevd[810]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded tg3.c:v3.123 (March 21, 2012) ssb: Found chip with id 0x4311, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. usbcore: registered new device driver usb tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after cfg80211: Calling CRDA to update world regulatory domain hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 hda-codec: No codec parser is available ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 microcode: AMD CPU family 0xf not supported b43-phy0: Broadcom 4311 WLAN found (core revision 13) Broadcom 43xx driver loaded [ Features: P ] hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 1-2: new full-speed USB device number 2 using ohci_hcd ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' usb 3-1: new low-speed USB device number 2 using ohci_hcd Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usb 4-1: new full-speed USB device number 2 using ohci_hcd usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver btusb EXT4-fs (sda3): re-mounted. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 wlan0: send auth to 00:21:91:82:3c:30 (try 1/3) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1/3) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1 > acpi_skip_timer_override in a 3rd test (and also using acpi=debug in > both cases) and provide dmesg output for those testruns. Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.0 (root@dos) (gcc version 4.6.3 (Gentoo 4.6.3 p1.0, pie-0.5.1) ) #2 SMP PREEMPT Thu May 24 22:49:31 OMST 2012 Command line: root=/dev/sda3 acpi=debug acpi_skip_timer_override BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) Malformed early option 'acpi' NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 SB600 revision 0x14 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71744 r8192 d22464 u1048576 pcpu-alloc: s71744 r8192 d22464 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 acpi=debug acpi_skip_timer_override PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 28000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853536k/5242880k available (4382k kernel code, 1180420k absent, 208924k reserved, 1971k data, 432k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2190.698 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4381.39 BogoMIPS (lpj=2190698) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120320 ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4381.39 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xb7fc8000-0xb7fe7fb7] (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 pci 0000:00:01.0: [1002:7912] type 01 class 0x060400 pci 0000:00:04.0: [1002:7914] type 01 class 0x060400 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 00 class 0x010182 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:01:05.0: [1002:791f] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 00 class 0x020000 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1337877262.453:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (67 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (51 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP: cubic registered ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 432k freed NET: Registered protocol family 1 udevd[810]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found microcode: AMD CPU family 0xf not supported input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 ssb: Found chip with id 0x4311, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 cfg80211: Calling CRDA to update world regulatory domain b43-phy0: Broadcom 4311 WLAN found (core revision 13) Broadcom 43xx driver loaded [ Features: P ] tg3.c:v3.123 (March 21, 2012) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 hda-codec: No codec parser is available ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 hub 1-0:1.0: unable to enumerate USB device on port 5 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb 2-2: new full-speed USB device number 2 using ohci_hcd Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usb 3-1: new low-speed USB device number 2 using ohci_hcd usbcore: registered new interface driver btusb input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 4-1: new full-speed USB device number 2 using ohci_hcd EXT4-fs (sda3): re-mounted. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 wlan0: direct probe to 00:21:91:82:3c:30 (try 1/3) wlan0: send auth to 00:21:91:82:3c:30 (try 2/3) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1/3) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1 ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <20120529140940.GA10421@alberich.amd.com>]
* Re: PROBLEM: Performance drop [not found] ` <20120529140940.GA10421@alberich.amd.com> @ 2012-05-29 20:20 ` Comrade DOS 2012-05-30 12:43 ` Andreas Herrmann 0 siblings, 1 reply; 14+ messages in thread From: Comrade DOS @ 2012-05-29 20:20 UTC (permalink / raw) To: Andreas Herrmann, linux-kernel > Unfortunately you have used acpi=debug instead of apic=debug. So I > can't compare I/O APIC configurations between the different test > scenarios. Sorry me for this mistake. > So what I'd need next is a log (with apic=debug) from > - booting 3.3.5 I use linux 3.3.7 on this machine now. Log from 3.3.7: Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.3.7-gentoo (root@dos) (gcc version 4.7.0 (Gentoo 4.7.0 p1.0, pie-0.5.3) ) #3 SMP PREEMPT Mon May 28 10:59:42 OMST 2012 Command line: root=/dev/sda3 apic=debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120111/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fb000 ( fee00000) [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 SB600 revision 0x14 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fb000 ( fee00000) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 ACPI: IRQ9 used by override. Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs mapped IOAPIC to ffffffffff5fa000 (fec00000) nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71424 r8192 d22784 u1048576 pcpu-alloc: s71424 r8192 d22784 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 apic=debug PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ ac000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853736k/5242880k available (4258k kernel code, 1180420k absent, 208724k reserved, 1892k data, 428k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2190.736 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4381.47 BogoMIPS (lpj=2190736) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120111 Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:1 Dest:1) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) apic 2 pin 16 not connected apic 2 pin 17 not connected apic 2 pin 18 not connected apic 2 pin 19 not connected apic 2 pin 20 not connected apic 2 pin 21 not connected apic 2 pin 22 not connected apic 2 pin 23 not connected ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1246686 ... PM-Timer delta = 357901 ... PM-Timer result ok ..... delta 1246686 ..... mult: 53552896 ..... calibration result: 199469 ..... CPU clock speed is 2194.0168 MHz. ..... host bus clock speed is 199.0469 MHz. Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4381.47 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region at b7fc8000 (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 pci 0000:00:04.0: [1002:7914] type 1 class 0x000604 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 1 class 0x000604 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 1 class 0x000604 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 pci 0000:01:05.0: [1002:791f] type 0 class 0x000300 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 0 class 0x000200 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 0 class 0x000280 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 2 class 0x000607 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 0 class 0x000c00 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) IOAPIC[0]: Set routing entry (2-22 -> 0x29 -> IRQ 22 Mode:0 Active:0 Dest:1) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm PCI: max bus depth: 2 pci_try_num: 3 pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 14: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 13: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] IOAPIC[0]: Set routing entry (2-20 -> 0x41 -> IRQ 20 Mode:1 Active:1 Dest:1) pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1400-0x14ff] pci_bus 0000:03: resource 1 [io 0x1000-0x10ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) IOAPIC[0]: Set routing entry (2-23 -> 0x49 -> IRQ 23 Mode:1 Active:1 Dest:1) IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1 Dest:1) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1338321895.378:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X Linux agpgart interface v0.103 ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (67 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (50 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. IOAPIC[0]: Set routing entry (2-19 -> 0x71 -> IRQ 19 Mode:1 Active:1 Dest:1) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 IOAPIC[0]: Set routing entry (2-16 -> 0x79 -> IRQ 16 Mode:1 Active:1 Dest:1) ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP cubic registered printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0001 ... PIC ISR: 0000 ... PIC ELCR: 0e20 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000002000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000002000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 00000831 ... APIC ICR2: 01000000 ... APIC LVTT: 000000ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00003017 ... APIC TMCCT: 00000000 ... APIC TDCR: 00000003 ... APIC EFEAT: 00010003 ... APIC ECTRL: 00000000 ... APIC EILVT0: 000000f9 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178021 ....... : max redirection entries: 17 ....... : PRQ implemented: 1 ....... : IO APIC version: 21 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 01 0 0 0 0 0 1 1 30 01 01 0 0 0 0 0 1 1 31 02 01 1 0 0 0 0 0 0 32 03 01 0 0 0 0 0 1 1 33 04 01 0 0 0 0 0 1 1 34 05 01 0 0 0 0 0 1 1 35 06 01 0 0 0 0 0 1 1 36 07 01 0 0 0 0 0 1 1 37 08 01 0 0 0 0 0 1 1 38 09 01 0 1 0 1 0 1 1 39 0a 01 0 0 0 0 0 1 1 3A 0b 01 0 0 0 0 0 1 1 3B 0c 01 0 0 0 0 0 1 1 3C 0d 01 0 0 0 0 0 1 1 3D 0e 01 0 0 0 0 0 1 1 3E 0f 01 0 0 0 0 0 1 1 3F 10 01 0 1 0 1 0 1 1 79 11 01 1 1 0 1 0 1 1 51 12 00 1 0 0 0 0 0 0 00 13 01 1 1 0 1 0 1 1 71 14 01 1 1 0 1 0 1 1 41 15 00 1 0 0 0 0 0 0 00 16 01 0 0 0 0 0 1 1 29 17 01 1 1 0 1 0 1 1 49 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 428k freed NET: Registered protocol family 1 udevd[801]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 tg3.c:v3.122 (December 7, 2011) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 IOAPIC[0]: Set routing entry (2-18 -> 0x81 -> IRQ 18 Mode:1 Active:1 Dest:1) ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 cfg80211: Calling CRDA to update world regulatory domain hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 b43-phy0: Broadcom 4311 WLAN found (core revision 13) ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' Broadcom 43xx driver loaded [ Features: P ] usb 3-1: new low-speed USB device number 2 using ohci_hcd snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 2-2: new full-speed USB device number 2 using ohci_hcd hda-codec: No codec parser is available Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usbcore: registered new interface driver btusb usb 4-1: new full-speed USB device number 2 using ohci_hcd EXT4-fs (sda3): re-mounted. Opts: (null) EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 (try 1) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated wlan0: moving STA 00:21:91:82:3c:30 to state 1 wlan0: moving STA 00:21:91:82:3c:30 to state 2 wlan0: moving STA 00:21:91:82:3c:30 to state 3 EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1 > - booting 3.4 Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 3.4.0 (root@dos) (gcc version 4.7.0 (Gentoo 4.7.0 p1.0, pie-0.5.3) ) #1 SMP PREEMPT Wed May 30 02:32:19 OMST 2012 Command line: root=/dev/sda3 apic=debug BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000b7fb0000 (usable) BIOS-e820: 00000000b7fb0000 - 00000000b7fc8000 (reserved) BIOS-e820: 00000000b7fc8000 - 00000000b7fe7fb8 (ACPI NVS) BIOS-e820: 00000000b7fe7fb8 - 00000000c0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved) BIOS-e820: 00000000ffbc0000 - 00000000ffcc0000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000140000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. DMI: Hewlett-Packard HP Compaq 6715b (GB833EA#ACB)/30C2, BIOS 68YTT Ver. F.0E 11/25/2008 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x140000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C0FFF write-protect C1000-C3FFF write-back C4000-C4FFF write-protect C5000-C7FFF write-back C8000-C8FFF write-protect C9000-CBFFF write-back CC000-CCFFF write-protect CD000-CFFFF write-back D0000-EFFFF uncachable F0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 0000000000 mask FF80000000 write-back 1 base 0080000000 mask FFE0000000 write-back 2 base 00A0000000 mask FFF0000000 write-back 3 base 00B0000000 mask FFF8000000 write-back 4 disabled 5 disabled 6 disabled 7 disabled TOM2: 0000000140000000 aka 5120M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000b8000000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xb7fb0 max_arch_pfn = 0x400000000 Scan SMP from ffff880000000000 for 1024 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. Scan SMP from ffff8800000f0000 for 65536 bytes. Scan SMP from ffff88000009fc00 for 1024 bytes. initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff88000009a000] 9a000 size 20480 init_memory_mapping: 0000000000000000-00000000b7fb0000 0000000000 - 00b7e00000 page 2M 00b7e00000 - 00b7fb0000 page 4k kernel direct mapping tables up to b7fb0000 @ 1fffb000-20000000 init_memory_mapping: 0000000100000000-0000000140000000 0100000000 - 0140000000 page 2M kernel direct mapping tables up to 140000000 @ b7faa000-b7fb0000 ACPI: RSDP 00000000000fe0b0 00024 (v02 HP ) ACPI: XSDT 00000000b7fc81bc 00064 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: FACP 00000000b7fc8084 000F4 (v04 HP 0944 00000003 HP 00000001) ACPI Error: 32/64X address mismatch in Pm2ControlBlock: 0x00008800/0x0000000000008100, using 32 (20120320/tbfadt-443) ACPI: DSDT 00000000b7fc84a4 11A38 (v01 HP SB400 00010000 MSFT 03000001) ACPI: FACS 00000000b7fe7d80 00040 ACPI: SLIC 00000000b7fc8220 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) ACPI: EPTH 00000000b7fc8398 00038 (v01 HP 0944 00000001 HP 00000001) ACPI: APIC 00000000b7fc83d0 00062 (v01 HP 0944 00000001 HP 00000001) ACPI: MCFG 00000000b7fc8434 0003C (v01 HP 0944 00000001 HP 00000001) ACPI: TCPA 00000000b7fc8470 00032 (v02 HP 0944 00000001 HP 00000001) ACPI: SSDT 00000000b7fd9edc 00059 (v01 HP HPQNLP 00000001 MSFT 03000001) ACPI: SSDT 00000000b7fd9f35 00136 (v01 HP PSSTBLID 00000001 HP 00000001) ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fb000 ( fee00000) [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b800000-ffff88013f5fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00140000 Movable zone start PFN for each node Early memory PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x000b7fb0 0: 0x00100000 -> 0x00140000 On node 0 totalpages: 1015615 DMA zone: 64 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3914 pages, LIFO batch:0 DMA32 zone: 16320 pages used for memmap DMA32 zone: 733168 pages, LIFO batch:31 Normal zone: 4096 pages used for memmap Normal zone: 258048 pages, LIFO batch:31 SB600 revision 0x14 Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override Detected use of extended apic ids on hypertransport bus ACPI: PM-Timer IO Port: 0x8008 ACPI: Local APIC address 0xfee00000 mapped APIC to ffffffffff5fb000 ( fee00000) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Int: type 0, pol 3, trig 3, bus 00, IRQ 09, APIC ID 2, APIC INT 09 Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 2, APIC INT 00 Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 2, APIC INT 01 Int: type 0, pol 0, trig 0, bus 00, IRQ 02, APIC ID 2, APIC INT 02 Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 2, APIC INT 03 Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 2, APIC INT 04 Int: type 0, pol 0, trig 0, bus 00, IRQ 05, APIC ID 2, APIC INT 05 Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 2, APIC INT 06 Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 2, APIC INT 07 Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 2, APIC INT 08 ACPI: IRQ9 used by override. Int: type 0, pol 0, trig 0, bus 00, IRQ 0a, APIC ID 2, APIC INT 0a Int: type 0, pol 0, trig 0, bus 00, IRQ 0b, APIC ID 2, APIC INT 0b Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 2, APIC INT 0c Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 2, APIC INT 0d Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 2, APIC INT 0e Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 2, APIC INT 0f Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs mapped IOAPIC to ffffffffff5fa000 (fec00000) nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000b7fb0000 - 00000000b7fc8000 PM: Registered nosave memory: 00000000b7fc8000 - 00000000b7fe7000 PM: Registered nosave memory: 00000000b7fe7000 - 00000000b7fe8000 PM: Registered nosave memory: 00000000b7fe8000 - 00000000c0000000 PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 PM: Registered nosave memory: 00000000fec02000 - 00000000ffbc0000 PM: Registered nosave memory: 00000000ffbc0000 - 00000000ffcc0000 PM: Registered nosave memory: 00000000ffcc0000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 25 pages/cpu @ffff88013fc00000 s71936 r8192 d22272 u1048576 pcpu-alloc: s71936 r8192 d22272 u1048576 alloc=1*2097152 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 995130 Kernel command line: root=/dev/sda3 apic=debug PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ ac000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ ac000000 PM: Registered nosave memory: 00000000ac000000 - 00000000b0000000 Memory: 3853624k/5242880k available (4315k kernel code, 1180420k absent, 208836k reserved, 1942k data, 432k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Preemptible hierarchical RCU implementation. NR_IRQS:4352 nr_irqs:512 16 Extended CMOS year: 2000 Console: colour VGA+ 80x25 console [tty0] enabled Fast TSC calibration failed TSC: Unable to calibrate against PIT TSC: using PMTIMER reference calibration Detected 2190.683 MHz processor. Marking TSC unstable due to TSCs unsynchronized Calibrating delay loop (skipped), value calculated using timer frequency.. 4381.36 BogoMIPS (lpj=2190683) pid_max: default: 32768 minimum: 301 Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys cpuacct Initializing cgroup subsys freezer tseg: 0000000000 mce: CPU supports 5 MCE banks LVT offset 0 assigned for vector 0xf9 using AMD E400 aware idle routine SMP alternatives: switching to UP code ACPI: Core revision 20120320 Getting VERSION: 80050010 Getting VERSION: 80050010 Getting ID: 0 Getting ID: ff000000 Getting LVT0: 700 Getting LVT1: 400 enabled ExtINT on CPU#0 ENABLING IO-APIC IRQs init IO_APIC IRQs IOAPIC[0]: Set routing entry (2-0 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-5 -> 0x35 -> IRQ 5 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-9 -> 0x39 -> IRQ 9 Mode:1 Active:1 Dest:1) IOAPIC[0]: Set routing entry (2-10 -> 0x3a -> IRQ 10 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-11 -> 0x3b -> IRQ 11 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) IOAPIC[0]: Set routing entry (2-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) apic 2 pin 16 not connected apic 2 pin 17 not connected apic 2 pin 18 not connected apic 2 pin 19 not connected apic 2 pin 20 not connected apic 2 pin 21 not connected apic 2 pin 22 not connected apic 2 pin 23 not connected ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 CPU0: Mobile AMD Sempron(tm) Processor 3800+ stepping 02 Using local APIC timer interrupts. calibrating APIC timer ... ... lapic delta = 1246683 ... PM-Timer delta = 357900 ... PM-Timer result ok ..... delta 1246683 ..... mult: 53552767 ..... calibration result: 199469 ..... CPU clock speed is 2194.0160 MHz. ..... host bus clock speed is 199.0469 MHz. Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f MCE: In-kernel MCE decoding enabled. Brought up 1 CPUs Total of 1 processors activated (4381.36 BogoMIPS). devtmpfs: initialized PM: Registering ACPI NVS region [mem 0xb7fc8000-0xb7fe7fb7] (131000 bytes) NET: Registered protocol family 16 node 0 link 0: io port [1000, fffff] TOM: 00000000c0000000 aka 3072M node 0 link 0: mmio [e0000000, efffffff] node 0 link 0: mmio [f0000000, ffffffff] node 0 link 0: mmio [c8000000, dfffffff] node 0 link 0: mmio [c0000000, c7ffffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [c0000000, bfffffff] TOM2: 0000000140000000 aka 5120M bus: [00, ff] on node 0 link 0 bus: 00 index 0 [io 0x0000-0xffff] bus: 00 index 1 [mem 0xc0000000-0xffffffff] bus: 00 index 2 [mem 0x000a0000-0x000bffff] bus: 00 index 3 [mem 0x140000000-0xfcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab <bio-0> at 0 ACPI: Added _OSI(Module Device) ACPI: Added _OSI(Processor Device) ACPI: Added _OSI(3.0 _SCP Extensions) ACPI: Added _OSI(Processor Aggregator Device) ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: Power Resource [C171] (off) ACPI: Power Resource [C231] (off) ACPI: Power Resource [C24D] (on) ACPI: Power Resource [C397] (off) ACPI: Power Resource [C398] (off) ACPI: Power Resource [C399] (off) ACPI: Power Resource [C39A] (off) ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug ACPI: PCI Root Bridge [C08B] (domain 0000 [bus 00-ff]) pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfedfffff] pci_root PNP0A03:00: host bridge window [mem 0xfee01000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] pci 0000:00:00.0: [1002:7910] type 00 class 0x060000 pci 0000:00:01.0: [1002:7912] type 01 class 0x060400 pci 0000:00:04.0: [1002:7914] type 01 class 0x060400 pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:05.0: [1002:7915] type 01 class 0x060400 pci 0000:00:05.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: [1002:7916] type 01 class 0x060400 pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:12.0: [1002:4380] type 00 class 0x01018f pci 0000:00:12.0: reg 10: [io 0x9000-0x9007] pci 0000:00:12.0: reg 14: [io 0x9008-0x900b] pci 0000:00:12.0: reg 18: [io 0x9010-0x9017] pci 0000:00:12.0: reg 1c: [io 0x5018-0x501b] pci 0000:00:12.0: reg 20: [io 0x5020-0x502f] pci 0000:00:12.0: reg 24: [mem 0xd0609000-0xd06093ff] pci 0000:00:12.0: set SATA to AHCI mode pci 0000:00:13.0: [1002:4387] type 00 class 0x0c0310 pci 0000:00:13.0: reg 10: [mem 0xd0601000-0xd0601fff] pci 0000:00:13.1: [1002:4388] type 00 class 0x0c0310 pci 0000:00:13.1: reg 10: [mem 0xd0602000-0xd0602fff] pci 0000:00:13.2: [1002:4389] type 00 class 0x0c0310 pci 0000:00:13.2: reg 10: [mem 0xd0603000-0xd0603fff] pci 0000:00:13.3: [1002:438a] type 00 class 0x0c0310 pci 0000:00:13.3: reg 10: [mem 0xd0604000-0xd0604fff] pci 0000:00:13.4: [1002:438b] type 00 class 0x0c0310 pci 0000:00:13.4: reg 10: [mem 0xd0605000-0xd0605fff] pci 0000:00:13.5: [1002:4386] type 00 class 0x0c0320 pci 0000:00:13.5: reg 10: [mem 0xd0606000-0xd06060ff] pci 0000:00:13.5: supports D1 D2 pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 pci 0000:00:14.0: reg 10: [io 0x8200-0x820f] pci 0000:00:14.1: [1002:438c] type 00 class 0x010182 pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:14.1: reg 20: [io 0x5040-0x504f] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 pci 0000:00:14.2: reg 10: [mem 0xd0608000-0xd060bfff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.3: [1002:438d] type 00 class 0x060100 pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 pci 0000:00:18.0: [1022:1100] type 00 class 0x060000 pci 0000:00:18.1: [1022:1101] type 00 class 0x060000 pci 0000:00:18.2: [1022:1102] type 00 class 0x060000 pci 0000:00:18.3: [1022:1103] type 00 class 0x060000 pci 0000:01:05.0: [1002:791f] type 00 class 0x030000 pci 0000:01:05.0: reg 10: [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:01:05.0: reg 18: [mem 0xd0400000-0xd040ffff 64bit] pci 0000:01:05.0: reg 20: [io 0x4000-0x40ff] pci 0000:01:05.0: reg 24: [mem 0xd0500000-0xd05fffff] pci 0000:01:05.0: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:10:00.0: [14e4:1693] type 00 class 0x020000 pci 0000:10:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit] pci 0000:10:00.0: PME# supported from D3hot D3cold pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:30:00.0: [14e4:4312] type 00 class 0x028000 pci 0000:30:00.0: reg 10: [mem 0xc8000000-0xc8003fff 64bit] pci 0000:30:00.0: supports D1 D2 pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: [1180:0476] type 02 class 0x060700 pci 0000:02:04.0: reg 10: [mem 0xd0100000-0xd0100fff] pci 0000:02:04.0: supports D1 D2 pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:04.1: [1180:0832] type 00 class 0x0c0010 pci 0000:02:04.1: reg 10: [mem 0xd0101000-0xd01017ff] pci 0000:02:04.1: supports D1 D2 pci 0000:02:04.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:14.4: PCI bridge to [bus 02-03] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xc0000000-0xfedfffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0xfee01000-0xffffffff] (subtractive decode) pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.C08B._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C08C._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.C08B.C0FC._PRT] pci0000:00: Requesting ACPI _OSC control (0x1d) pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d ACPI _OSC control for PCIe not granted, disabling ASPM ACPI: PCI Interrupt Link [C145] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C146] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C147] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C148] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C149] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14A] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [C14B] (IRQs 10 11) *0, disabled. ACPI: PCI Interrupt Link [C14C] (IRQs 10 11) *0, disabled. vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded vgaarb: bridge control possible 0000:01:05.0 SCSI subsystem initialized libata version 3.00 loaded. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:14.2: address space collision: [mem 0xd0608000-0xd060bfff 64bit] conflicts with 0000:00:12.0 [mem 0xd0609000-0xd06093ff] reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 00000000b7fb0000 - 00000000b7ffffff NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:00: [mem 0x00000000-0x0009ffff] pnp 00:00: [mem 0x000e0000-0x000fffff] pnp 00:00: [mem 0x00100000-0xffffffff] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) pnp 00:01: [bus 00-ff] pnp 00:01: [io 0x0cf8-0x0cff] pnp 00:01: [io 0x0000-0x0cf7 window] pnp 00:01: [io 0x0d00-0xffff window] pnp 00:01: [mem 0x000a0000-0x000bffff window] pnp 00:01: [mem 0xc0000000-0xfedfffff window] pnp 00:01: [mem 0xfee01000-0xffffffff window] pnp 00:01: [mem 0x000d0000-0x000dffff window] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) pnp 00:02: Plug and Play ACPI device, IDs PNP0401 (disabled) pnp 00:03: [io 0x00f0-0x00ff] IOAPIC[0]: Set routing entry (2-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) pnp 00:03: [irq 13] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:04: [io 0x0000-0x000f] pnp 00:04: [io 0x0080-0x008f] pnp 00:04: [io 0x00c0-0x00df] pnp 00:04: [dma 4] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x0070-0x0071] pnp 00:06: [io 0x0072-0x0073] IOAPIC[0]: Set routing entry (2-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) pnp 00:06: [irq 8] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] IOAPIC[0]: Set routing entry (2-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) pnp 00:07: [irq 1] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) IOAPIC[0]: Set routing entry (2-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) pnp 00:08: [irq 12] pnp 00:08: Plug and Play ACPI device, IDs SYN0131 SYN0100 SYN0002 PNP0f13 (active) pnp 00:09: [io 0x0010-0x001f] pnp 00:09: [io 0x0022-0x0023] pnp 00:09: [io 0x002e-0x002f] pnp 00:09: [io 0x004e-0x004f] pnp 00:09: [io 0x0092] pnp 00:09: [io 0x00b0-0x00b1] pnp 00:09: [io 0x040b] pnp 00:09: [io 0x04d0-0x04d1] pnp 00:09: [io 0x04d6] pnp 00:09: [io 0x0500-0x053f] pnp 00:09: [io 0x0c00-0x0c01] pnp 00:09: [io 0x0c14] pnp 00:09: [io 0x0c50-0x0c51] pnp 00:09: [io 0x0c52] pnp 00:09: [io 0x0c6c] pnp 00:09: [io 0x0c6f] pnp 00:09: [io 0x0cd0-0x0cdf] pnp 00:09: [mem 0xffb00000-0xffbfffff] pnp 00:09: [mem 0xfff00000-0xffffffff] system 00:09: [io 0x040b] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x04d6] has been reserved system 00:09: [io 0x0500-0x053f] has been reserved system 00:09: [io 0x0c00-0x0c01] has been reserved system 00:09: [io 0x0c14] has been reserved system 00:09: [io 0x0c50-0x0c51] has been reserved system 00:09: [io 0x0c52] has been reserved system 00:09: [io 0x0c6c] has been reserved system 00:09: [io 0x0c6f] has been reserved system 00:09: [io 0x0cd0-0x0cdf] has been reserved system 00:09: [mem 0xffb00000-0xffbfffff] could not be reserved system 00:09: [mem 0xfff00000-0xffffffff] has been reserved system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) IOAPIC[0]: Set routing entry (2-22 -> 0x29 -> IRQ 22 Mode:0 Active:0 Dest:1) pnp 00:0a: [irq 22] pnp 00:0a: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0b: [io 0x8000-0x802f] pnp 00:0b: [io 0x8100-0x811f] pnp 00:0b: [mem 0xe0000000-0xefffffff] pnp 00:0b: [mem 0xfec00000-0xfec000ff] pnp 00:0b: [mem 0xfed45000-0xfed8ffff] system 00:0b: [io 0x8000-0x802f] has been reserved system 00:0b: [io 0x8100-0x811f] has been reserved system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved system 00:0b: [mem 0xfec00000-0xfec000ff] could not be reserved system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0c: [mem 0x000cd400-0x000cffff] pnp 00:0c: [mem 0x00000000-0x07ffffff] pnp 00:0c: [mem 0xfee00000-0xfee00fff] system 00:0c: [mem 0x000cd400-0x000cffff] has been reserved system 00:0c: [mem 0x00000000-0x07ffffff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) pnp: PnP ACPI: found 13 devices ACPI: ACPI bus type pnp unregistered Switching to clocksource acpi_pm pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:00:14.4: bridge window [io 0x1000-0x0fff] to [bus 02-03] add_size 1000 pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000 pci 0000:00:14.4: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:00:14.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 pci 0000:00:14.4: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:00:14.2: BAR 0: assigned [mem 0xc8100000-0xc8103fff 64bit] pci 0000:00:14.4: BAR 13: assigned [io 0x1000-0x1fff] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] pci 0000:00:01.0: bridge window [mem 0xd0400000-0xd05fffff] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xc7ffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 10-10] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd00fffff] pci 0000:00:05.0: PCI bridge to [bus 20-20] pci 0000:00:05.0: bridge window [io 0x2000-0x3fff] pci 0000:00:05.0: bridge window [mem 0xcc000000-0xcfffffff] pci 0000:00:06.0: PCI bridge to [bus 30-30] pci 0000:00:06.0: bridge window [mem 0xc8000000-0xc80fffff] pci 0000:02:04.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000 pci 0000:02:04.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100 pci 0000:02:04.0: BAR 15: assigned [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: BAR 16: assigned [mem 0xd8000000-0xdbffffff] pci 0000:02:04.0: BAR 13: assigned [io 0x1000-0x10ff] pci 0000:02:04.0: BAR 14: assigned [io 0x1400-0x14ff] pci 0000:02:04.0: CardBus bridge to [bus 03-06] pci 0000:02:04.0: bridge window [io 0x1000-0x10ff] pci 0000:02:04.0: bridge window [io 0x1400-0x14ff] pci 0000:02:04.0: bridge window [mem 0xd4000000-0xd7ffffff pref] pci 0000:02:04.0: bridge window [mem 0xd8000000-0xdbffffff] pci 0000:00:14.4: PCI bridge to [bus 02-03] pci 0000:00:14.4: bridge window [io 0x1000-0x1fff] pci 0000:00:14.4: bridge window [mem 0xd0100000-0xd03fffff] pci 0000:00:14.4: bridge window [mem 0xd4000000-0xd7ffffff pref] IOAPIC[0]: Set routing entry (2-20 -> 0x41 -> IRQ 20 Mode:1 Active:1 Dest:1) pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:00: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:00: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] pci_bus 0000:01: resource 1 [mem 0xd0400000-0xd05fffff] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xc7ffffff 64bit pref] pci_bus 0000:10: resource 1 [mem 0xd0000000-0xd00fffff] pci_bus 0000:20: resource 0 [io 0x2000-0x3fff] pci_bus 0000:20: resource 1 [mem 0xcc000000-0xcfffffff] pci_bus 0000:30: resource 1 [mem 0xc8000000-0xc80fffff] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff] pci_bus 0000:02: resource 1 [mem 0xd0100000-0xd03fffff] pci_bus 0000:02: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:02: resource 7 [mem 0xc0000000-0xfedfffff] pci_bus 0000:02: resource 8 [mem 0xfee01000-0xffffffff] pci_bus 0000:02: resource 9 [mem 0x000d0000-0x000dffff] pci_bus 0000:03: resource 0 [io 0x1000-0x10ff] pci_bus 0000:03: resource 1 [io 0x1400-0x14ff] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd7ffffff pref] pci_bus 0000:03: resource 3 [mem 0xd8000000-0xdbffffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP: reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) IOAPIC[0]: Set routing entry (2-23 -> 0x49 -> IRQ 23 Mode:1 Active:1 Dest:1) IOAPIC[0]: Set routing entry (2-17 -> 0x51 -> IRQ 17 Mode:1 Active:1 Dest:1) pci 0000:01:05.0: Boot video device PCI: CLS 64 bytes, default 64 PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ ac000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture audit: initializing netlink socket (disabled) type=2000 audit(1338322052.381:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages msgmni has been set to 7655 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler cfq registered (default) pcieport 0000:00:04.0: irq 40 for MSI/MSI-X pcieport 0000:00:05.0: irq 41 for MSI/MSI-X pcieport 0000:00:06.0: irq 42 for MSI/MSI-X ACPI: AC Adapter [C1EB] (on-line) input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0 ACPI: Sleep Button [C28D] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [C1F0] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] ACPI: Fan [C39B] (off) ACPI: Fan [C39C] (off) ACPI: Fan [C39D] (off) ACPI: Fan [C39E] (off) acpi device:02: registered as cooling_device4 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input3 ACPI: Video Device [C08D] (multi-head: yes rom: no post: no) ACPI: acpi_idle registered with cpuidle thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ1] (62 C) thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ2] (50 C) thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ3] (31 C) Linux agpgart interface v0.103 [drm] Initialized drm 1.1.0 20060810 [drm] radeon defaulting to userspace modesetting. IOAPIC[0]: Set routing entry (2-19 -> 0x71 -> IRQ 19 Mode:1 Active:1 Dest:1) [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0 loop: module loaded ahci 0000:00:12.0: version 3.0 IOAPIC[0]: Set routing entry (2-16 -> 0x79 -> IRQ 16 Mode:1 Active:1 Dest:1) ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part ccc scsi0 : ahci scsi1 : ahci scsi2 : ahci scsi3 : ahci ata1: SATA max UDMA/133 abar m1024@0xd0609000 port 0xd0609100 irq 16 ata2: DUMMY ata3: DUMMY ata4: DUMMY scsi4 : pata_atiixp scsi5 : pata_atiixp ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5040 irq 14 ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5048 irq 15 i8042: PNP: PS/2 Controller [PNP0303:C24A,PNP0f13:C24B] at 0x60,0x64 irq 1,12 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mousedev: PS/2 mouse device common for all mice rtc_cmos 00:06: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram i2c /dev entries driver cpuidle: using governor ladder cpuidle: using governor menu EFI Variables Facility v0.08 2004-May-17 TCP: cubic registered printing PIC contents ... PIC IMR: ffff ... PIC IRR: 0000 ... PIC ISR: 0000 ... PIC ELCR: 0e20 printing local APIC contents on CPU#0/0: ... APIC ID: 00000000 (0) ... APIC VERSION: 80050010 ... APIC TASKPRI: 00000000 (00) ... APIC ARBPRI: 00000000 (00) ... APIC PROCPRI: 00000000 ... APIC LDR: 01000000 ... APIC DFR: ffffffff ... APIC SPIV: 000001ff ... APIC ISR field: 0000000000000000000000000000000000000000000000000000000000000000 ... APIC TMR field: 0000000002000000000000000000000000000000000000000000000000000000 ... APIC IRR field: 0000000010000000000000000000000000000000000000000000000000008000 ... APIC ESR: 00000000 ... APIC ICR: 00000831 ... APIC ICR2: 01000000 ... APIC LVTT: 000000ef ... APIC LVTPC: 00000400 ... APIC LVT0: 00010700 ... APIC LVT1: 00000400 ... APIC LVTERR: 000000fe ... APIC TMICT: 00002d9e ... APIC TMCCT: 00000000 ... APIC TDCR: 00000003 ... APIC EFEAT: 00010003 ... APIC ECTRL: 00000000 ... APIC EILVT0: 000000f9 number of MP IRQ sources: 16. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 00000000 ....... : physical APIC id: 00 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178021 ....... : max redirection entries: 17 ....... : PRQ implemented: 1 ....... : IO APIC version: 21 .... register #02: 00000000 ....... : arbitration: 00 .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 01 0 0 0 0 0 1 1 30 01 01 0 0 0 0 0 1 1 31 02 01 1 0 0 0 0 0 0 32 03 01 0 0 0 0 0 1 1 33 04 01 0 0 0 0 0 1 1 34 05 01 0 0 0 0 0 1 1 35 06 01 0 0 0 0 0 1 1 36 07 01 0 0 0 0 0 1 1 37 08 01 0 0 0 0 0 1 1 38 09 01 0 1 0 1 0 1 1 39 0a 01 0 0 0 0 0 1 1 3A 0b 01 0 0 0 0 0 1 1 3B 0c 01 0 0 0 0 0 1 1 3C 0d 01 0 0 0 0 0 1 1 3D 0e 01 0 0 0 0 0 1 1 3E 0f 01 0 0 0 0 0 1 1 3F 10 01 0 1 0 1 0 1 1 79 11 01 1 1 0 1 0 1 1 51 12 00 1 0 0 0 0 0 0 00 13 01 1 1 0 1 0 1 1 71 14 01 1 1 0 1 0 1 1 41 15 00 1 0 0 0 0 0 0 00 16 01 0 0 0 0 0 1 1 29 17 01 1 1 0 1 0 1 1 49 IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ16 -> 0:16 IRQ17 -> 0:17 IRQ19 -> 0:19 IRQ20 -> 0:20 IRQ22 -> 0:22 IRQ23 -> 0:23 .................................... done. ACPI: Battery Slot [C1ED] (battery present) ACPI: Battery Slot [C1EC] (battery absent) ata5.00: ATAPI: MATSHITADVD-RAM UJ-860H, 1.02, max MWDMA2 ata5.00: configured for MWDMA2 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: ST9120822AS, 3.BHE, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: SB600 AHCI: limiting to 255 sectors per cmd ata1.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST9120822AS 3.BH PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-860H 1.02 PQ: 0 ANSI: 5 scsi 4:0:0:0: Attached scsi generic sg1 type 5 sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x2580b1, caps: 0xa04793/0x300000/0x0 psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 registered taskstats version 1 powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3800+ (1 cpu cores) (version 2.20.00) powernow-k8: fid 0xe (2200 MHz), vid 0xd powernow-k8: fid 0xc (2000 MHz), vid 0xf powernow-k8: fid 0xa (1800 MHz), vid 0x11 powernow-k8: fid 0x8 (1600 MHz), vid 0x13 powernow-k8: fid 0x0 (800 MHz), vid 0x18 EXT4-fs (sda3): couldn't mount as ext3 due to feature incompatibilities EXT4-fs (sda3): couldn't mount as ext2 due to feature incompatibilities EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) VFS: Mounted root (ext4 filesystem) readonly on device 8:3. Freeing unused kernel memory: 432k freed NET: Registered protocol family 1 udevd[805]: starting version 182 hp_accel: hardware type NC6715x found lis3lv02d: 12 bits sensor found microcode: AMD CPU family 0xf not supported input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input6 Registered led device: hp::hddprotect hp_accel: driver loaded k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 IOAPIC[0]: Set routing entry (2-18 -> 0x81 -> IRQ 18 Mode:1 Active:1 Dest:1) ssb: Found chip with id 0x4311, rev 0x02 and package 0x00 ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x13, vendor 0x4243) ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0D, vendor 0x4243) ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x04, vendor 0x4243) ssb: Core 3 found: PCI-E (cc 0x820, rev 0x05, vendor 0x4243) ssb: Sonics Silicon Backplane found on PCI device 0000:30:00.0 tg3.c:v3.123 (March 21, 2012) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Calling CRDA to update world regulatory domain tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 23, io mem 0xd0601000 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after tg3 0000:10:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update. tg3 0000:10:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1a:4b:76:46:6e tg3 0000:10:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0]) tg3 0000:10:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] tg3 0000:10:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit] hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 23, io mem 0xd0606000 ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.1: irq 17, io mem 0xd0602000 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.2: irq 17, io mem 0xd0603000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.3: irq 17, io mem 0xd0604000 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.4: irq 17, io mem 0xd0605000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 snd_hda_intel 0000:00:14.2: power state changed by ACPI to D0 b43-phy0: Broadcom 4311 WLAN found (core revision 13) sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray cdrom: Uniform CD-ROM driver Revision: 3.20 sr 4:0:0:0: Attached scsi CD-ROM sr0 Broadcom 43xx driver loaded [ Features: P ] usb 4-1: new full-speed USB device number 2 using ohci_hcd hda-codec: No codec parser is available ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' usb 1-2: new full-speed USB device number 2 using ohci_hcd usb 3-1: new low-speed USB device number 2 using ohci_hcd input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:13.1/usb3/3-1/3-1:1.0/input/input7 generic-usb 0003:046D:C05B.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:13.1-1/input0 usbcore: registered new interface driver usbhid usbhid: USB HID core driver Bluetooth: Core ver 2.16 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP socket layer initialized Bluetooth: SCO socket layer initialized usbcore: registered new interface driver btusb EXT4-fs (sda3): re-mounted. Opts: (null) EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) tg3 0000:10:00.0: irq 43 for MSI/MSI-X b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23) NET: Registered protocol family 17 [drm] Setting GART location based on new memory map [drm] Loading RS690/RS740 Microcode [drm] Num pipes: 1 [drm] writeback test succeeded in 1 usecs wlan0: authenticate with 00:21:91:82:3c:30 wlan0: send auth to 00:21:91:82:3c:30 (try 1/3) wlan0: authenticated wlan0: associate with 00:21:91:82:3c:30 (try 1/3) wlan0: RX AssocResp from 00:21:91:82:3c:30 (capab=0x411 status=0 aid=1) wlan0: associated EXT4-fs (sda3): re-mounted. Opts: commit=0 [drm] Num pipes: 1 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PROBLEM: Performance drop 2012-05-29 20:20 ` Comrade DOS @ 2012-05-30 12:43 ` Andreas Herrmann [not found] ` <CA+fU7qehx6Jjb0ZWNrh+bh6SYCKLVWZDd7iLnsC=hDVqqFd74Q@mail.gmail.com> 2012-07-07 14:40 ` Jason Vas Dias 0 siblings, 2 replies; 14+ messages in thread From: Andreas Herrmann @ 2012-05-30 12:43 UTC (permalink / raw) To: Comrade DOS; +Cc: linux-kernel On Wed, May 30, 2012 at 03:20:27AM +0700, Comrade DOS wrote: > > Unfortunately you have used acpi=debug instead of apic=debug. So I > > can't compare I/O APIC configurations between the different test > > scenarios. > > Sorry me for this mistake. No problem. The logs show no difference in IO-APIC pin usage. So it's not the old problem ... Comparing both logs I found following differences: (Most other stuff seems just to be changed formatting.) -ACPI: Thermal Zone [TZ1] (67 C) +ACPI: Thermal Zone [TZ1] (62 C) I think what's shown is the temperature value which just differed between the boots. But that made me look at acpi/thermal.c where the messages came from. The only change between 3.3 and 3.4 is this commit: commit 9bcb8118965ab4631a65ee0726e6518f75cda6c5 Author: Matthew Garrett <mjg@redhat.com> Date: Wed Feb 1 10:26:54 2012 -0500 ACPI: Evaluate thermal trip points before reading temperature I'd suggest to do a test with this patch reverted. Maybe this change to fix issues with one HP Laptop (re-)intruduced the trouble with your system. If reverting the patch helps we have to take a closer look at your ACPI tables. So can you please do a # git revert 9bcb8118965ab4631a65ee0726e6518f75cda6c5 on top of v3.4 and rebuid your kernel and rerun your test (with apic=debug. This allows easier diff to dmesg output of your previous test runs). In any case it also would be good to have the acpi tables from your system. So please also use # acpidump >acpidump.3.3 (using the 3.3.x kernel) # acpidump >acpidump.3.4 (using the unmodified 3.4 version) and send all files as attachments to your mail. This will allow me to look at your thermal zone definitions in the working and non-working case. Thanks, Andreas ^ permalink raw reply [flat|nested] 14+ messages in thread
[parent not found: <CA+fU7qehx6Jjb0ZWNrh+bh6SYCKLVWZDd7iLnsC=hDVqqFd74Q@mail.gmail.com>]
* Fwd: PROBLEM: Performance drop [not found] ` <CA+fU7qehx6Jjb0ZWNrh+bh6SYCKLVWZDd7iLnsC=hDVqqFd74Q@mail.gmail.com> @ 2012-07-06 2:47 ` Comrade DOS 0 siblings, 0 replies; 14+ messages in thread From: Comrade DOS @ 2012-07-06 2:47 UTC (permalink / raw) To: linux-kernel ---------- Forwarded message ---------- From: Comrade DOS <suloevdmitry@gmail.com> Date: 2012/6/2 Subject: Re: PROBLEM: Performance drop To: Andreas Herrmann <herrmann.der.user@googlemail.com>, linux-kernel@vger.kernel.org Sorry for delay. > If reverting the patch helps we have to take a closer look at your > ACPI tables. So can you please do a It really helps! After reverting of this commit all problem go away. All files what you need in attachment. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PROBLEM: Performance drop 2012-05-30 12:43 ` Andreas Herrmann [not found] ` <CA+fU7qehx6Jjb0ZWNrh+bh6SYCKLVWZDd7iLnsC=hDVqqFd74Q@mail.gmail.com> @ 2012-07-07 14:40 ` Jason Vas Dias 2012-07-07 14:45 ` Jason Vas Dias 2012-07-11 22:06 ` Greg Kroah-Hartman 1 sibling, 2 replies; 14+ messages in thread From: Jason Vas Dias @ 2012-07-07 14:40 UTC (permalink / raw) To: Andreas Herrmann; +Cc: Comrade DOS, linux-kernel, Greg Kroah-Hartman I can confirm that the AMD Turion X2 2.2Ghz HP Compaq 6715b "business" x86_64 k8 dual-core laptops circa 2007 DO get stuck in 800Khz mode and cannot switch out of it after booting the "stable" "v3.4.4" tagged kernel. I followed the containing post and reverted commit ff74ae50f01ee67764564815c023c362c87ce18b : Commit d51cdad33bb5bb370c05129f7c7f3a16a55eff40 Author: root <root@jvdspc.localdomain> Date: Fri Jul 6 18:57:03 2012 +0000 Revert "ACPI: Evaluate thermal trip points before reading temperature" This reverts commit 9bcb8118965ab4631a65ee0726e6518f75cda6c5. commit ff74ae50f01ee67764564815c023c362c87ce18b Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Date: Fri Jun 22 11:37:50 2012 -0700 And wow ! what a difference - back to a circa 2007 machine versus a circa 1987 machine. Not too many of us left around trying to run the latest version of linux on nearly 5-year-old hardware I guess, but still - please can you restore correct Linux cpufreq & thermal operation on old-style AMD k8 CPUs ? They do seem to depend on the temperature being set BEFORE 1st entry . Thanks & Regards, Jason Vas Dias (a Software Engineer) <jason.vas.dias@gmail.com> On Wed, May 30, 2012 at 1:43 PM, Andreas Herrmann <herrmann.der.user@googlemail.com> wrote: > On Wed, May 30, 2012 at 03:20:27AM +0700, Comrade DOS wrote: >> > Unfortunately you have used acpi=debug instead of apic=debug. So I >> > can't compare I/O APIC configurations between the different test >> > scenarios. >> >> Sorry me for this mistake. > > No problem. > > The logs show no difference in IO-APIC pin usage. > So it's not the old problem ... > > Comparing both logs I found following differences: > > (Most other stuff seems just to be changed formatting.) > > -ACPI: Thermal Zone [TZ1] (67 C) > +ACPI: Thermal Zone [TZ1] (62 C) > > I think what's shown is the temperature value which just differed > between the boots. But that made me look at acpi/thermal.c where the > messages came from. The only change between 3.3 and 3.4 is this > commit: > > commit 9bcb8118965ab4631a65ee0726e6518f75cda6c5 > Author: Matthew Garrett <mjg@redhat.com> > Date: Wed Feb 1 10:26:54 2012 -0500 > > ACPI: Evaluate thermal trip points before reading temperature > > I'd suggest to do a test with this patch reverted. Maybe this change > to fix issues with one HP Laptop (re-)intruduced the trouble with your > system. > > If reverting the patch helps we have to take a closer look at your > ACPI tables. So can you please do a > > # git revert 9bcb8118965ab4631a65ee0726e6518f75cda6c5 > > on top of v3.4 and rebuid your kernel and rerun your test (with > apic=debug. This allows easier diff to dmesg output of your previous > test runs). > > In any case it also would be good to have the acpi tables from your > system. So please also use > # acpidump >acpidump.3.3 (using the 3.3.x kernel) > # acpidump >acpidump.3.4 (using the unmodified 3.4 version) > > and send all files as attachments to your mail. > > This will allow me to look at your thermal zone definitions in the > working and non-working case. > > > Thanks, > > Andreas > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PROBLEM: Performance drop 2012-07-07 14:40 ` Jason Vas Dias @ 2012-07-07 14:45 ` Jason Vas Dias 2012-07-11 22:06 ` Greg Kroah-Hartman 1 sibling, 0 replies; 14+ messages in thread From: Jason Vas Dias @ 2012-07-07 14:45 UTC (permalink / raw) To: Andreas Herrmann; +Cc: Comrade DOS, linux-kernel, Matthew Garrett Sorry, of course the commit I backed out was : 9bcb8118965ab4631a65ee0726e6518f75cda6c5. On Sat, Jul 7, 2012 at9bcb8118965ab4631a65ee0726e6518f75cda6c5. 3:40 PM, Jason Vas Dias <jason.vas.dias@gmail.com> wrote: > I can confirm that the AMD Turion X2 2.2Ghz HP Compaq 6715b > "business" x86_64 k8 dual-core laptops circa 2007 > DO get stuck in 800Khz mode and cannot switch out of it after booting > the "stable" "v3.4.4" tagged kernel. > > I followed the containing post and reverted commit > ff74ae50f01ee67764564815c023c362c87ce18b : > > Commit d51cdad33bb5bb370c05129f7c7f3a16a55eff40 > Author: root <root@jvdspc.localdomain> > Date: Fri Jul 6 18:57:03 2012 +0000 > > Revert "ACPI: Evaluate thermal trip points before reading temperature" > > This reverts commit 9bcb8118965ab4631a65ee0726e6518f75cda6c5. > > commit ff74ae50f01ee67764564815c023c362c87ce18b > Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Date: Fri Jun 22 11:37:50 2012 -0700 > > And wow ! what a difference - back to a circa 2007 machine versus a > circa 1987 machine. > > Not too many of us left around trying to run the latest version of > linux on nearly 5-year-old hardware I guess, but still - > please can you restore correct Linux cpufreq & thermal operation on > old-style AMD k8 CPUs ? > They do seem to depend on the temperature being set BEFORE 1st entry . > > Thanks & Regards, > Jason Vas Dias (a Software Engineer) <jason.vas.dias@gmail.com> > > > On Wed, May 30, 2012 at 1:43 PM, Andreas Herrmann > <herrmann.der.user@googlemail.com> wrote: >> On Wed, May 30, 2012 at 03:20:27AM +0700, Comrade DOS wrote: >>> > Unfortunately you have used acpi=debug instead of apic=debug. So I >>> > can't compare I/O APIC configurations between the different test >>> > scenarios. >>> >>> Sorry me for this mistake. >> >> No problem. >> >> The logs show no difference in IO-APIC pin usage. >> So it's not the old problem ... >> >> Comparing both logs I found following differences: >> >> (Most other stuff seems just to be changed formatting.) >> >> -ACPI: Thermal Zone [TZ1] (67 C) >> +ACPI: Thermal Zone [TZ1] (62 C) >> >> I think what's shown is the temperature value which just differed >> between the boots. But that made me look at acpi/thermal.c where the >> messages came from. The only change between 3.3 and 3.4 is this >> commit: >> >> commit 9bcb8118965ab4631a65ee0726e6518f75cda6c5 >> Author: Matthew Garrett <mjg@redhat.com> >> Date: Wed Feb 1 10:26:54 2012 -0500 >> >> ACPI: Evaluate thermal trip points before reading temperature >> >> I'd suggest to do a test with this patch reverted. Maybe this change >> to fix issues with one HP Laptop (re-)intruduced the trouble with your >> system. >> >> If reverting the patch helps we have to take a closer look at your >> ACPI tables. So can you please do a >> >> # git revert 9bcb8118965ab4631a65ee0726e6518f75cda6c5 >> >> on top of v3.4 and rebuid your kernel and rerun your test (with >> apic=debug. This allows easier diff to dmesg output of your previous >> test runs). >> >> In any case it also would be good to have the acpi tables from your >> system. So please also use >> # acpidump >acpidump.3.3 (using the 3.3.x kernel) >> # acpidump >acpidump.3.4 (using the unmodified 3.4 version) >> >> and send all files as attachments to your mail. >> >> This will allow me to look at your thermal zone definitions in the >> working and non-working case. >> >> >> Thanks, >> >> Andreas >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html >> Please read the FAQ at http://www.tux.org/lkml/ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PROBLEM: Performance drop 2012-07-07 14:40 ` Jason Vas Dias 2012-07-07 14:45 ` Jason Vas Dias @ 2012-07-11 22:06 ` Greg Kroah-Hartman 2012-07-14 11:11 ` Jason Vas Dias 1 sibling, 1 reply; 14+ messages in thread From: Greg Kroah-Hartman @ 2012-07-11 22:06 UTC (permalink / raw) To: Jason Vas Dias, Matthew Garrett, Len Brown Cc: Andreas Herrmann, Comrade DOS, linux-kernel On Sat, Jul 07, 2012 at 03:40:58PM +0100, Jason Vas Dias wrote: > I can confirm that the AMD Turion X2 2.2Ghz HP Compaq 6715b > "business" x86_64 k8 dual-core laptops circa 2007 > DO get stuck in 800Khz mode and cannot switch out of it after booting > the "stable" "v3.4.4" tagged kernel. > > I followed the containing post and reverted commit > ff74ae50f01ee67764564815c023c362c87ce18b : > > Commit d51cdad33bb5bb370c05129f7c7f3a16a55eff40 > Author: root <root@jvdspc.localdomain> > Date: Fri Jul 6 18:57:03 2012 +0000 > > Revert "ACPI: Evaluate thermal trip points before reading temperature" > > This reverts commit 9bcb8118965ab4631a65ee0726e6518f75cda6c5. > > commit ff74ae50f01ee67764564815c023c362c87ce18b > Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Date: Fri Jun 22 11:37:50 2012 -0700 > > And wow ! what a difference - back to a circa 2007 machine versus a > circa 1987 machine. > > Not too many of us left around trying to run the latest version of > linux on nearly 5-year-old hardware I guess, but still - > please can you restore correct Linux cpufreq & thermal operation on > old-style AMD k8 CPUs ? > They do seem to depend on the temperature being set BEFORE 1st entry . > > Thanks & Regards, > Jason Vas Dias (a Software Engineer) <jason.vas.dias@gmail.com> Any reason you didn't include the original developers of the 9bcb8118965ab4631a65ee0 patch? Matthew, Len, any ideas? greg k-h ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PROBLEM: Performance drop 2012-07-11 22:06 ` Greg Kroah-Hartman @ 2012-07-14 11:11 ` Jason Vas Dias 2012-09-27 17:34 ` Greg Kroah-Hartman 0 siblings, 1 reply; 14+ messages in thread From: Jason Vas Dias @ 2012-07-14 11:11 UTC (permalink / raw) To: Greg Kroah-Hartman Cc: Matthew Garrett, Len Brown, Andreas Herrmann, Comrade DOS, linux-kernel [-- Attachment #1: Type: text/plain, Size: 8424 bytes --] Hi - any progress on this or on the patch I submitted for it ? - please see enclosed - apologies for my being forced to use gmail which has mandatory line wrap - Please do something about restoring correct thermal operation on x86_64 K8's with HP BIOS ! Thanks & Regards, Jason Re: [PATCH: 1/1] ACPI: make evaluation of thermal trip points before temperature or vice versa dependant on new "temp_b4_trip" module parameter to support older AMD x86_64s Kernel x Jason Vas Dias Jul 9 (5 days ago) Reply to Rusty, linux-kernel, Andreas, Matthew, Len, Comrade Thanks Rusty - sorry I didn't see your email until now - revised patch addressing your comments attached - BTW, sorry about the word wrap on the initial posting - should I attach a '.patch' file or inline ? Trying both . The Revised Patch (against : commit bd0a521e88aa7a06ae7aabaed7ae196ed4ad867a Author: Linus Torvalds <torvalds@linux-foundation.org> Date: Sat Jul 7 17:23:56 2012 -0700 Linux 3.5-rc6 ) : $ git diff bd0a521e88aa7a06ae7aabaed7ae196ed4ad867a > /tmp/acpi_thermal_temp_b4_trip.patch $ cat /tmp/acpi_thermal_temp_b4_trip.patch diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 7dbebea..13d3b22 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -96,6 +96,10 @@ static int psv; module_param(psv, int, 0644); MODULE_PARM_DESC(psv, "Disable or override all passive trip points."); +static bool temp_b4_trip; +module_param(temp_b4_trip, bool, 0644); +MODULE_PARM_DESC(temp_b4_trip, "Get the temperature before initializing trip points."); + static int acpi_thermal_add(struct acpi_device *device); static int acpi_thermal_remove(struct acpi_device *device, int type); static int acpi_thermal_resume(struct acpi_device *device); @@ -941,27 +945,41 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) if (!tz) return -EINVAL; - /* Get trip points [_CRT, _PSV, etc.] (required) */ - result = acpi_thermal_get_trip_points(tz); - if (result) + if( temp_b4_trip ) + { /* some CPUs, eg AMD K8 need temperature before trip points can be obtained */ + /* Get temperature [_TMP] (required) */ + result = acpi_thermal_get_temperature(tz); + if (result) return result; - - /* Get temperature [_TMP] (required) */ - result = acpi_thermal_get_temperature(tz); - if (result) + + /* Get trip points [_CRT, _PSV, etc.] (required) */ + result = acpi_thermal_get_trip_points(tz); + if (result) return result; - + }else + { /* newer x86_64s need trip points set before temperature obtained */ + /* Get trip points [_CRT, _PSV, etc.] (required) */ + result = acpi_thermal_get_trip_points(tz); + if (result) + return result; + + /* Get temperature [_TMP] (required) */ + result = acpi_thermal_get_temperature(tz); + if (result) + return result; + } + /* Set the cooling mode [_SCP] to active cooling (default) */ result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE); if (!result) tz->flags.cooling_mode = 1; - + /* Get default polling frequency [_TZP] (optional) */ if (tzp) tz->polling_frequency = tzp; else acpi_thermal_get_polling_frequency(tz); - + return 0; } @@ -1110,6 +1128,14 @@ static int thermal_psv(const struct dmi_system_id *d) { return 0; } +static int thermal_temp_b4_trip(const struct dmi_system_id *d) { + + printk(KERN_NOTICE "ACPI: %s detected: : " + "getting temperature before trip point initialisation\n", d->ident); + temp_b4_trip = TRUE; + return 0; +} + static struct dmi_system_id thermal_dmi_table[] __initdata = { /* * Award BIOS on this AOpen makes thermal control almost worthless. @@ -1147,6 +1173,14 @@ static struct dmi_system_id thermal_dmi_table[] __initdata = { DMI_MATCH(DMI_BOARD_NAME, "7ZX"), }, }, + { + .callback = thermal_temp_b4_trip, + .ident = "HP 6715b laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"), + }, + }, {} }; Incidentally, there are still plenty of cpufreq and temperature related issues on this platform : with the "ondemand" or "performance" governors, placing a large load on system ( eg. building gcc-4.7.1 ) makes the CPU switch into highest frequency, but not switch down after the 65 degree trip point has been toggled once . And once the trip point has been reached once and the temperature falls below 65, returning CPU freq to 2GHz, the reported temperature seems to be stuck at 62 degrees even though the base of the laptop nearly burns my hand . So I get emergency overheating reboots unless I manually run my cpufreq & temperature monitoring scripts - which, if the CPU freq is 2Ghz, now have to down the freqency to 800Khz for 2 seconds every 8 seconds regardless of what temperature is reported . On Mon, Jul 9, 2012 at 1:30 AM, Rusty Russell <rusty@ozlabs.org> wrote: > On Sun, 8 Jul 2012 19:50:54 +0100, Jason Vas Dias <jason.vas.dias@gmail.com> wrote: >> This patch adds a new acpi.thermal.temp_b4_trip = 1 settting, which >> causes the temperature >> to be set before evaluation of thermal trip points (the old default) ; >> this mode should >> be selected automatically by DMI match if the system identifies as "HP >> Compaq 6715b" . >> >> Please consider applying a patch like that attached to fix the issue reported >> in lkml thread "Re: PROBLEM: Performance drop" recently, whereby >> it was found that HP 6715b laptops ( which have 2.2Ghz dual-core AMD >> x86_64 k8 CPUs) >> get stuck running the CPU at 800Khz and cannot switch frequency. I have verified >> that this still the case with v3.4.4 tagged "stable" kernel. > > >> >> diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c >> index 7dbebea..de2b164 100644 >> --- a/drivers/acpi/thermal.c >> +++ b/drivers/acpi/thermal.c >> @@ -96,6 +96,10 @@ static int psv; >> module_param(psv, int, 0644); >> MODULE_PARM_DESC(psv, "Disable or override all passive trip points."); >> >> +static int temp_b4_trip; >> +module_param(temp_b4_trip, int, 0); >> +MODULE_PARM_DESC(temp_b4_trip, "Get the temperature before >> initializing trip points."); >> + > > Hi Jason, > > Two points: this is a bool, why not make it one? I know, the > rest of the code is old-school, but this is a new parameter. Also, why > not 0644 so it can be read and set at runtime? > > Cheers, > Rusty. On Wed, Jul 11, 2012 at 11:06 PM, Greg Kroah-Hartman <gregkh@linuxfoundation.org> wrote: > On Sat, Jul 07, 2012 at 03:40:58PM +0100, Jason Vas Dias wrote: >> I can confirm that the AMD Turion X2 2.2Ghz HP Compaq 6715b >> "business" x86_64 k8 dual-core laptops circa 2007 >> DO get stuck in 800Khz mode and cannot switch out of it after booting >> the "stable" "v3.4.4" tagged kernel. >> >> I followed the containing post and reverted commit >> ff74ae50f01ee67764564815c023c362c87ce18b : >> >> Commit d51cdad33bb5bb370c05129f7c7f3a16a55eff40 >> Author: root <root@jvdspc.localdomain> >> Date: Fri Jul 6 18:57:03 2012 +0000 >> >> Revert "ACPI: Evaluate thermal trip points before reading temperature" >> >> This reverts commit 9bcb8118965ab4631a65ee0726e6518f75cda6c5. >> >> commit ff74ae50f01ee67764564815c023c362c87ce18b >> Author: Greg Kroah-Hartman <gregkh@linuxfoundation.org> >> Date: Fri Jun 22 11:37:50 2012 -0700 >> >> And wow ! what a difference - back to a circa 2007 machine versus a >> circa 1987 machine. >> >> Not too many of us left around trying to run the latest version of >> linux on nearly 5-year-old hardware I guess, but still - >> please can you restore correct Linux cpufreq & thermal operation on >> old-style AMD k8 CPUs ? >> They do seem to depend on the temperature being set BEFORE 1st entry . >> >> Thanks & Regards, >> Jason Vas Dias (a Software Engineer) <jason.vas.dias@gmail.com> > > Any reason you didn't include the original developers of the > 9bcb8118965ab4631a65ee0 patch? > > Matthew, Len, any ideas? > > greg k-h [-- Attachment #2: ACPI-Thermal-PROBLEM_performance_X86_64_K8.patch --] [-- Type: application/octet-stream, Size: 2919 bytes --] diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 7dbebea..13d3b22 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -96,6 +96,10 @@ static int psv; module_param(psv, int, 0644); MODULE_PARM_DESC(psv, "Disable or override all passive trip points."); +static bool temp_b4_trip; +module_param(temp_b4_trip, bool, 0644); +MODULE_PARM_DESC(temp_b4_trip, "Get the temperature before initializing trip points."); + static int acpi_thermal_add(struct acpi_device *device); static int acpi_thermal_remove(struct acpi_device *device, int type); static int acpi_thermal_resume(struct acpi_device *device); @@ -941,27 +945,41 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) if (!tz) return -EINVAL; - /* Get trip points [_CRT, _PSV, etc.] (required) */ - result = acpi_thermal_get_trip_points(tz); - if (result) + if( temp_b4_trip ) + { /* some CPUs, eg AMD K8 need temperature before trip points can be obtained */ + /* Get temperature [_TMP] (required) */ + result = acpi_thermal_get_temperature(tz); + if (result) return result; - - /* Get temperature [_TMP] (required) */ - result = acpi_thermal_get_temperature(tz); - if (result) + + /* Get trip points [_CRT, _PSV, etc.] (required) */ + result = acpi_thermal_get_trip_points(tz); + if (result) return result; - + }else + { /* newer x86_64s need trip points set before temperature obtained */ + /* Get trip points [_CRT, _PSV, etc.] (required) */ + result = acpi_thermal_get_trip_points(tz); + if (result) + return result; + + /* Get temperature [_TMP] (required) */ + result = acpi_thermal_get_temperature(tz); + if (result) + return result; + } + /* Set the cooling mode [_SCP] to active cooling (default) */ result = acpi_thermal_set_cooling_mode(tz, ACPI_THERMAL_MODE_ACTIVE); if (!result) tz->flags.cooling_mode = 1; - + /* Get default polling frequency [_TZP] (optional) */ if (tzp) tz->polling_frequency = tzp; else acpi_thermal_get_polling_frequency(tz); - + return 0; } @@ -1110,6 +1128,14 @@ static int thermal_psv(const struct dmi_system_id *d) { return 0; } +static int thermal_temp_b4_trip(const struct dmi_system_id *d) { + + printk(KERN_NOTICE "ACPI: %s detected: : " + "getting temperature before trip point initialisation\n", d->ident); + temp_b4_trip = TRUE; + return 0; +} + static struct dmi_system_id thermal_dmi_table[] __initdata = { /* * Award BIOS on this AOpen makes thermal control almost worthless. @@ -1147,6 +1173,14 @@ static struct dmi_system_id thermal_dmi_table[] __initdata = { DMI_MATCH(DMI_BOARD_NAME, "7ZX"), }, }, + { + .callback = thermal_temp_b4_trip, + .ident = "HP 6715b laptop", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"), + }, + }, {} }; ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: PROBLEM: Performance drop 2012-07-14 11:11 ` Jason Vas Dias @ 2012-09-27 17:34 ` Greg Kroah-Hartman 2012-09-27 17:48 ` Borislav Petkov 0 siblings, 1 reply; 14+ messages in thread From: Greg Kroah-Hartman @ 2012-09-27 17:34 UTC (permalink / raw) To: Jason Vas Dias Cc: Matthew Garrett, Len Brown, Andreas Herrmann, Comrade DOS, linux-kernel On Sat, Jul 14, 2012 at 12:11:41PM +0100, Jason Vas Dias wrote: > Hi - any progress on this or on the patch I submitted for it ? - > please see enclosed - apologies for my being forced to use gmail which > has mandatory line wrap - > Please do something about restoring correct thermal operation on > x86_64 K8's with HP BIOS ! > Thanks & Regards, > Jason > > Re: [PATCH: 1/1] ACPI: make evaluation of thermal trip points before > temperature or vice versa dependant on new "temp_b4_trip" module > parameter to support older AMD x86_64s I don't see this patch in Linus's tree, so I can't do anything about it in a stable kernel release. Please work with the ACPI developers to get it pushed to Linus's tree, and after that, let me know what the git commit id is of it so I can add it to a stable release. thanks, greg k-h ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PROBLEM: Performance drop 2012-09-27 17:34 ` Greg Kroah-Hartman @ 2012-09-27 17:48 ` Borislav Petkov 2012-10-09 22:19 ` katabami 2012-10-18 1:21 ` katabami 0 siblings, 2 replies; 14+ messages in thread From: Borislav Petkov @ 2012-09-27 17:48 UTC (permalink / raw) To: Jason Vas Dias Cc: Greg Kroah-Hartman, Matthew Garrett, Len Brown, Comrade DOS, linux-kernel, Andreas Herrmann On Thu, Sep 27, 2012 at 10:34:56AM -0700, Greg Kroah-Hartman wrote: > On Sat, Jul 14, 2012 at 12:11:41PM +0100, Jason Vas Dias wrote: > > Hi - any progress on this or on the patch I submitted for it ? - > > please see enclosed - apologies for my being forced to use gmail which > > has mandatory line wrap - > > Please do something about restoring correct thermal operation on > > x86_64 K8's with HP BIOS ! > > Thanks & Regards, > > Jason > > > > Re: [PATCH: 1/1] ACPI: make evaluation of thermal trip points before > > temperature or vice versa dependant on new "temp_b4_trip" module > > parameter to support older AMD x86_64s > > I don't see this patch in Linus's tree, so I can't do anything about it > in a stable kernel release. Please work with the ACPI developers to get > it pushed to Linus's tree, and after that, let me know what the git > commit id is of it so I can add it to a stable release. Yeah, this patch adds a dmi quirk *and* a module parameter which looks kinda too much to me. In any case, Andreas needs to look at this since he's been dealing with those old laptops. Jason, can you clean up your patch, drop the module parameter, write a proper commit message, run it through checkpatch.pl and send it as a reply to this thread with a mail client which doesn't mangle it so that we can look at it further? Thanks. -- Regards/Gruss, Boris. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PROBLEM: Performance drop 2012-09-27 17:48 ` Borislav Petkov @ 2012-10-09 22:19 ` katabami 2012-10-18 1:21 ` katabami 1 sibling, 0 replies; 14+ messages in thread From: katabami @ 2012-10-09 22:19 UTC (permalink / raw) To: linux-kernel Hi, just for recording. Bug 43284[1] is the duplicate of this bug report. It stops by reporting the "bad" commit, 9bcb8118965ab4631a65ee0726e6518f75cda6c5. [1]https://bugzilla.kernel.org/show_bug.cgi?id=43284 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: PROBLEM: Performance drop 2012-09-27 17:48 ` Borislav Petkov 2012-10-09 22:19 ` katabami @ 2012-10-18 1:21 ` katabami 1 sibling, 0 replies; 14+ messages in thread From: katabami @ 2012-10-18 1:21 UTC (permalink / raw) To: linux-kernel Sent a patch to the bugzilla,[1] following Boris' and Rusty Russell's advice. [1] https://bugzilla.kernel.org/show_bug.cgi?id=43284 Thanks a lot. ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2012-10-18 1:21 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-05-23 19:12 PROBLEM: Performance drop Comrade DOS
2012-05-24 12:31 ` Andreas Herrmann
[not found] ` <CA+fU7qfPznJpRABC4Z=xmRZW6p5Mw3dFLBySk9HuPnaCYMMnEg@mail.gmail.com>
2012-05-26 6:11 ` Comrade DOS
[not found] ` <20120529140940.GA10421@alberich.amd.com>
2012-05-29 20:20 ` Comrade DOS
2012-05-30 12:43 ` Andreas Herrmann
[not found] ` <CA+fU7qehx6Jjb0ZWNrh+bh6SYCKLVWZDd7iLnsC=hDVqqFd74Q@mail.gmail.com>
2012-07-06 2:47 ` Fwd: " Comrade DOS
2012-07-07 14:40 ` Jason Vas Dias
2012-07-07 14:45 ` Jason Vas Dias
2012-07-11 22:06 ` Greg Kroah-Hartman
2012-07-14 11:11 ` Jason Vas Dias
2012-09-27 17:34 ` Greg Kroah-Hartman
2012-09-27 17:48 ` Borislav Petkov
2012-10-09 22:19 ` katabami
2012-10-18 1:21 ` katabami
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox