From: "Michael S. Tsirkin" <mst@redhat.com>
To: Gleb Natapov <gleb@redhat.com>
Cc: Alex Williamson <alex.williamson@redhat.com>,
avi@redhat.com, kvm@vger.kernel.org,
linux-kernel@vger.kernel.org, jan.kiszka@siemens.com
Subject: Re: [PATCH v5 1/4] kvm: Extend irqfd to support level interrupts
Date: Wed, 18 Jul 2012 13:48:44 +0300 [thread overview]
Message-ID: <20120718104844.GF4700@redhat.com> (raw)
In-Reply-To: <20120718104429.GD26120@redhat.com>
On Wed, Jul 18, 2012 at 01:44:29PM +0300, Gleb Natapov wrote:
> On Wed, Jul 18, 2012 at 01:41:14PM +0300, Michael S. Tsirkin wrote:
> > On Mon, Jul 16, 2012 at 02:33:47PM -0600, Alex Williamson wrote:
> > > In order to inject a level interrupt from an external source using an
> > > irqfd, we need to allocate a new irq_source_id. This allows us to
> > > assert and (later) de-assert an interrupt line independently from
> > > users of KVM_IRQ_LINE and avoid lost interrupts.
> > >
> > > We also add what may appear like a bit of excessive infrastructure
> > > around an object for storing this irq_source_id. However, notice
> > > that we only provide a way to assert the interrupt here. A follow-on
> > > interface will make use of the same irq_source_id to allow de-assert.
> > >
> > > Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
> > > ---
> > >
> > > Documentation/virtual/kvm/api.txt | 6 ++
> > > arch/x86/kvm/x86.c | 1
> > > include/linux/kvm.h | 3 +
> > > virt/kvm/eventfd.c | 114 ++++++++++++++++++++++++++++++++++++-
> > > 4 files changed, 120 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
> > > index 100acde..c7267d5 100644
> > > --- a/Documentation/virtual/kvm/api.txt
> > > +++ b/Documentation/virtual/kvm/api.txt
> > > @@ -1981,6 +1981,12 @@ the guest using the specified gsi pin. The irqfd is removed using
> > > the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd
> > > and kvm_irqfd.gsi.
> > >
> > > +The KVM_IRQFD_FLAG_LEVEL flag indicates the gsi input is for a level
> > > +triggered interrupt. In this case a new irqchip input is allocated
> > > +which is logically OR'd with other inputs allowing multiple sources
> > > +to independently assert level interrupts. The KVM_IRQFD_FLAG_LEVEL
> > > +is only necessary on setup, teardown is identical to that above.
> > > +KVM_IRQFD_FLAG_LEVEL support is indicated by KVM_CAP_IRQFD_LEVEL.
> > >
> > > 5. The kvm_run structure
> > > ------------------------
> > > diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> > > index a01a424..80bed07 100644
> > > --- a/arch/x86/kvm/x86.c
> > > +++ b/arch/x86/kvm/x86.c
> > > @@ -2148,6 +2148,7 @@ int kvm_dev_ioctl_check_extension(long ext)
> > > case KVM_CAP_GET_TSC_KHZ:
> > > case KVM_CAP_PCI_2_3:
> > > case KVM_CAP_KVMCLOCK_CTRL:
> > > + case KVM_CAP_IRQFD_LEVEL:
> > > r = 1;
> > > break;
> > > case KVM_CAP_COALESCED_MMIO:
> > > diff --git a/include/linux/kvm.h b/include/linux/kvm.h
> > > index 2ce09aa..b2e6e4f 100644
> > > --- a/include/linux/kvm.h
> > > +++ b/include/linux/kvm.h
> > > @@ -618,6 +618,7 @@ struct kvm_ppc_smmu_info {
> > > #define KVM_CAP_PPC_GET_SMMU_INFO 78
> > > #define KVM_CAP_S390_COW 79
> > > #define KVM_CAP_PPC_ALLOC_HTAB 80
> > > +#define KVM_CAP_IRQFD_LEVEL 81
> > >
> > > #ifdef KVM_CAP_IRQ_ROUTING
> > >
> > > @@ -683,6 +684,8 @@ struct kvm_xen_hvm_config {
> > > #endif
> > >
> > > #define KVM_IRQFD_FLAG_DEASSIGN (1 << 0)
> > > +/* Available with KVM_CAP_IRQFD_LEVEL */
> > > +#define KVM_IRQFD_FLAG_LEVEL (1 << 1)
> > >
> > > struct kvm_irqfd {
> > > __u32 fd;
> > > diff --git a/virt/kvm/eventfd.c b/virt/kvm/eventfd.c
> > > index 7d7e2aa..ecdbfea 100644
> > > --- a/virt/kvm/eventfd.c
> > > +++ b/virt/kvm/eventfd.c
> > > @@ -36,6 +36,68 @@
> > > #include "iodev.h"
> > >
> > > /*
> > > + * An irq_source_id can be created from KVM_IRQFD for level interrupt
> > > + * injections and shared with other interfaces for EOI or de-assert.
> > > + * Create an object with reference counting to make it easy to use.
> > > + */
> > > +struct _irq_source {
> > > + int id; /* the IRQ source ID */
> > > + bool level_asserted; /* Track assertion state and protect with lock */
> > > + spinlock_t lock; /* to avoid unnecessary re-assert/spurious eoi. */
> > > + struct kvm *kvm;
> > > + struct kref kref;
> > > +};
> > > +
> > > +static void _irq_source_release(struct kref *kref)
> > > +{
> > > + struct _irq_source *source;
> > > +
> > > + source = container_of(kref, struct _irq_source, kref);
> > > +
> > > + /* This also de-asserts */
> > > + kvm_free_irq_source_id(source->kvm, source->id);
> > > + kfree(source);
> > > +}
> > > +
> > > +static void _irq_source_put(struct _irq_source *source)
> > > +{
> > > + if (source)
> > > + kref_put(&source->kref, _irq_source_release);
> > > +}
> > > +
> > > +static struct _irq_source *__attribute__ ((used)) /* white lie for now */
> > > +_irq_source_get(struct _irq_source *source)
> > > +{
> > > + if (source)
> > > + kref_get(&source->kref);
> > > +
> > > + return source;
> > > +}
> > > +
> > > +static struct _irq_source *_irq_source_alloc(struct kvm *kvm)
> > > +{
> > > + struct _irq_source *source;
> > > + int id;
> > > +
> > > + source = kzalloc(sizeof(*source), GFP_KERNEL);
> > > + if (!source)
> > > + return ERR_PTR(-ENOMEM);
> > > +
> > > + id = kvm_request_irq_source_id(kvm);
> > > + if (id < 0) {
> > > + kfree(source);
> > > + return ERR_PTR(id);
> > > + }
> > > +
> > > + kref_init(&source->kref);
> > > + spin_lock_init(&source->lock);
> > > + source->kvm = kvm;
> > > + source->id = id;
> > > +
> > > + return source;
> > > +}
> > > +
> > > +/*
> > > * --------------------------------------------------------------------
> > > * irqfd: Allows an fd to be used to inject an interrupt to the guest
> > > *
> > > @@ -52,6 +114,8 @@ struct _irqfd {
> > > /* Used for level IRQ fast-path */
> > > int gsi;
> > > struct work_struct inject;
> > > + /* IRQ source ID for level triggered irqfds */
> > > + struct _irq_source *source;
> > > /* Used for setup/shutdown */
> > > struct eventfd_ctx *eventfd;
> > > struct list_head list;
> > > @@ -62,7 +126,7 @@ struct _irqfd {
> > > static struct workqueue_struct *irqfd_cleanup_wq;
> > >
> > > static void
> > > -irqfd_inject(struct work_struct *work)
> > > +irqfd_inject_edge(struct work_struct *work)
> > > {
> > > struct _irqfd *irqfd = container_of(work, struct _irqfd, inject);
> > > struct kvm *kvm = irqfd->kvm;
> > > @@ -71,6 +135,29 @@ irqfd_inject(struct work_struct *work)
> > > kvm_set_irq(kvm, KVM_USERSPACE_IRQ_SOURCE_ID, irqfd->gsi, 0);
> > > }
> > >
> > > +static void
> > > +irqfd_inject_level(struct work_struct *work)
> > > +{
> > > + struct _irqfd *irqfd = container_of(work, struct _irqfd, inject);
> > > +
> > > + /*
> > > + * Inject an interrupt only if not already asserted.
> > > + *
> > > + * We can safely ignore the kvm_set_irq return value here. If
> > > + * masked, the irr bit is still set and will eventually be serviced.
> > > + * This interface does not guarantee immediate injection. If
> > > + * coalesced, an eoi will be coming where we can de-assert and
> > > + * re-inject if necessary. NB, if you need to know if an interrupt
> > > + * was coalesced, this interface is not for you.
> > > + */
> > > + spin_lock(&irqfd->source->lock);
> > > + if (!irqfd->source->level_asserted) {
> > > + kvm_set_irq(irqfd->kvm, irqfd->source->id, irqfd->gsi, 1);
> > > + irqfd->source->level_asserted = true;
> > > + }
> > > + spin_unlock(&irqfd->source->lock);
> > > +}
> > > +
> >
> > So as was discussed kvm_set_irq under spinlock is bad for scalability
> > with multiple VCPUs. Why do we need a spinlock simply to protect
> > level_asserted? Let's use an atomic test and set/test and clear and the
> > problem goes away.
> >
> That sad reality is that for level interrupt we already scan all vcpus
> under spinlock.
Where?
> --
> Gleb.
next prev parent reply other threads:[~2012-07-18 10:48 UTC|newest]
Thread overview: 96+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-16 20:33 [PATCH v5 0/4] kvm: level irqfd and new eoifd Alex Williamson
2012-07-16 20:33 ` [PATCH v5 1/4] kvm: Extend irqfd to support level interrupts Alex Williamson
2012-07-17 21:26 ` Michael S. Tsirkin
2012-07-17 21:57 ` Alex Williamson
2012-07-17 22:00 ` Michael S. Tsirkin
2012-07-17 22:16 ` Alex Williamson
2012-07-17 22:28 ` Michael S. Tsirkin
2012-07-18 10:41 ` Michael S. Tsirkin
2012-07-18 10:44 ` Gleb Natapov
2012-07-18 10:48 ` Michael S. Tsirkin [this message]
2012-07-18 10:49 ` Gleb Natapov
2012-07-18 10:53 ` Michael S. Tsirkin
2012-07-18 10:55 ` Gleb Natapov
2012-07-18 11:22 ` Michael S. Tsirkin
2012-07-18 11:39 ` Michael S. Tsirkin
2012-07-18 11:48 ` Gleb Natapov
2012-07-18 12:07 ` Michael S. Tsirkin
2012-07-18 14:47 ` Alex Williamson
2012-07-18 15:38 ` Michael S. Tsirkin
2012-07-18 15:48 ` Alex Williamson
2012-07-18 15:58 ` Michael S. Tsirkin
2012-07-18 18:42 ` Marcelo Tosatti
2012-07-18 19:00 ` Gleb Natapov
2012-07-18 19:07 ` Alex Williamson
2012-07-18 19:13 ` Alex Williamson
2012-07-18 19:16 ` Michael S. Tsirkin
2012-07-18 20:28 ` Alex Williamson
2012-07-18 21:23 ` Marcelo Tosatti
2012-07-18 21:30 ` Michael S. Tsirkin
2012-07-16 20:33 ` [PATCH v5 2/4] kvm: KVM_EOIFD, an eventfd for EOIs Alex Williamson
2012-07-17 10:21 ` Michael S. Tsirkin
2012-07-17 13:59 ` Alex Williamson
2012-07-17 14:10 ` Michael S. Tsirkin
2012-07-17 14:29 ` Alex Williamson
2012-07-17 14:42 ` Michael S. Tsirkin
2012-07-17 14:57 ` Alex Williamson
2012-07-17 15:13 ` Michael S. Tsirkin
2012-07-17 15:41 ` Alex Williamson
2012-07-17 15:53 ` Michael S. Tsirkin
2012-07-17 16:06 ` Alex Williamson
2012-07-17 16:19 ` Michael S. Tsirkin
2012-07-17 16:52 ` Alex Williamson
2012-07-17 18:58 ` Michael S. Tsirkin
2012-07-17 20:03 ` Alex Williamson
2012-07-17 21:23 ` Michael S. Tsirkin
2012-07-17 22:09 ` Alex Williamson
2012-07-17 22:24 ` Michael S. Tsirkin
2012-07-18 2:44 ` Alex Williamson
2012-07-18 10:31 ` Michael S. Tsirkin
2012-07-16 20:34 ` [PATCH v5 3/4] kvm: Create kvm_clear_irq() Alex Williamson
2012-07-17 0:51 ` Michael S. Tsirkin
2012-07-17 2:42 ` Alex Williamson
2012-07-17 0:55 ` Michael S. Tsirkin
2012-07-17 10:14 ` Michael S. Tsirkin
2012-07-17 13:56 ` Alex Williamson
2012-07-17 14:08 ` Michael S. Tsirkin
2012-07-17 14:21 ` Alex Williamson
2012-07-17 14:53 ` Michael S. Tsirkin
2012-07-17 15:20 ` Alex Williamson
2012-07-17 15:36 ` Michael S. Tsirkin
2012-07-17 15:51 ` Alex Williamson
2012-07-17 15:57 ` Michael S. Tsirkin
2012-07-17 16:01 ` Gleb Natapov
2012-07-17 16:08 ` Alex Williamson
2012-07-17 16:14 ` Michael S. Tsirkin
2012-07-17 16:17 ` Alex Williamson
2012-07-17 16:21 ` Michael S. Tsirkin
2012-07-17 16:45 ` Alex Williamson
2012-07-17 18:55 ` Michael S. Tsirkin
2012-07-17 19:51 ` Alex Williamson
2012-07-17 21:05 ` Michael S. Tsirkin
2012-07-17 22:01 ` Alex Williamson
2012-07-17 22:05 ` Michael S. Tsirkin
2012-07-17 22:22 ` Alex Williamson
2012-07-17 22:31 ` Michael S. Tsirkin
2012-07-18 6:27 ` Gleb Natapov
2012-07-18 10:20 ` Michael S. Tsirkin
2012-07-18 10:27 ` Gleb Natapov
2012-07-18 10:33 ` Michael S. Tsirkin
2012-07-18 10:36 ` Gleb Natapov
2012-07-18 10:51 ` Michael S. Tsirkin
2012-07-18 10:53 ` Gleb Natapov
2012-07-18 11:08 ` Michael S. Tsirkin
2012-07-18 11:50 ` Gleb Natapov
2012-07-18 21:55 ` Michael S. Tsirkin
2012-07-17 16:36 ` Michael S. Tsirkin
2012-07-17 17:09 ` Gleb Natapov
2012-07-17 10:18 ` Michael S. Tsirkin
2012-07-16 20:34 ` [PATCH v5 4/4] kvm: Convert eoifd to use kvm_clear_irq Alex Williamson
2012-07-18 10:43 ` [PATCH v5 0/4] kvm: level irqfd and new eoifd Michael S. Tsirkin
2012-07-19 16:59 ` Michael S. Tsirkin
2012-07-19 17:29 ` Alex Williamson
2012-07-19 17:45 ` Michael S. Tsirkin
2012-07-19 18:48 ` Alex Williamson
2012-07-20 10:07 ` Michael S. Tsirkin
2012-07-22 15:09 ` Gleb Natapov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120718104844.GF4700@redhat.com \
--to=mst@redhat.com \
--cc=alex.williamson@redhat.com \
--cc=avi@redhat.com \
--cc=gleb@redhat.com \
--cc=jan.kiszka@siemens.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).