From: Fengguang Wu <fengguang.wu@intel.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Daniel Mack <zonque@gmail.com>,
Krzysztof Helt <krzysztof.h1@wp.pl>,
LKML <linux-kernel@vger.kernel.org>,
Rene Herman <rene.herman@gmail.com>,
alsa-devel@alsa-project.org
Subject: [PATCH] es1688 - freeup resources on init failure
Date: Sun, 29 Jul 2012 19:39:09 +0800 [thread overview]
Message-ID: <20120729113909.GA14106@localhost> (raw)
In-Reply-To: <s5hd33fknfg.wl%tiwai@suse.de>
> > err = snd_es1688_init(chip, 1);
> > if (err < 0)
> > - return err;
> > + goto exit_release_dma;
> >
> > /* Register device */
> > return snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
> > +
> > +exit_release_dma:
> > + free_dma(chip->dma8);
> > +exit_release_irq:
> > + free_irq(chip->irq, chip);
> > +exit_release_region:
> > + release_and_free_resource(chip->res_port);
> > +exit:
> > + return err;
>
> You can simply call snd_es1688_free(chip) instead of a bunch of
> labels. That is, all goto's can be "goto exit", and
>
> exit:
> snd_es1688_free(chip);
> return err;
snd_es1688_free() will call snd_es1688_init() which in turn use the
uninitialized spin locks and other data. So I end up with the below
patch. snd_device_new() could also return errors and will be handled
in the same way.
I don't have the hardware, however tests show it at least fixed the
boot time irq mismatch warnings.
Daniel, thanks for your initial implementation and please kindly
confirm the below 3rd version :)
Thanks,
Fengguang
---
es1688 - freeup resources on init failure
This will fix the following oops:
[ 6.169981] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688)
[ 6.170851] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e9 #14
[ 6.170851] Call Trace:
[ 6.170851] [<c1062237>] ? __setup_irq+0x3c7/0x420
[ 6.170851] [<c1062486>] ? request_threaded_irq+0x76/0x140
[ 6.170851] [<c1290220>] ? snd_es1688_ioctl+0x10/0x10
[ 6.170851] [<c10624c2>] ? request_threaded_irq+0xb2/0x140
[ 6.170851] [<c1291196>] ? snd_es1688_create+0x96/0x330
[ 6.170851] [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2
[ 6.170851] [<c11c9d80>] ? __driver_attach+0x80/0x80
[ 6.170851] [<c10db22f>] ? sysfs_create_link+0xf/0x20
[ 6.170851] [<c11c9d80>] ? __driver_attach+0x80/0x80
[ 6.170851] [<c11d1502>] ? isa_bus_probe+0x12/0x20
[ 6.170851] [<c11c9b95>] ? driver_probe_device+0x55/0x1c0
[ 6.170851] [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30
[ 6.170851] [<c13705ea>] ? klist_next+0x6a/0xe0
[ 6.170851] [<c11d15c1>] ? isa_bus_match+0x21/0x40
[ 6.170851] [<c11c8a24>] ? bus_for_each_drv+0x34/0x70
[ 6.170851] [<c11c9e4b>] ? device_attach+0x7b/0x90
[ 6.170851] [<c11c9d80>] ? __driver_attach+0x80/0x80
[ 6.170851] [<c11c8bff>] ? bus_probe_device+0x5f/0x80
[ 6.170851] [<c11c7493>] ? device_add+0x573/0x620
[ 6.170851] [<c1042820>] ? complete_all+0x40/0x60
[ 6.170851] [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30
[ 6.170851] [<c11d16c6>] ? isa_register_driver+0xb6/0x150
[ 6.170851] [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf
[ 6.170851] [<c15a99bc>] ? do_one_initcall+0x7f/0x12b
[ 6.170851] [<c15a9b7a>] ? kernel_init+0x112/0x1a9
[ 6.170851] [<c15a9423>] ? do_early_param+0x77/0x77
[ 6.170851] [<c15a9a68>] ? do_one_initcall+0x12b/0x12b
[ 6.170851] [<c13aefbe>] ? kernel_thread_helper+0x6/0xd
[ 6.190170] es1688: can't grab IRQ 5
[ 6.190613] genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 (ES1688)
[ 6.191566] Pid: 1, comm: swapper Not tainted 3.5.0-00004-gceee0e9 #14
[ 6.192394] Call Trace:
[ 6.192685] [<c1062237>] ? __setup_irq+0x3c7/0x420
[ 6.193342] [<c1062486>] ? request_threaded_irq+0x76/0x140
[ 6.194081] [<c1290220>] ? snd_es1688_ioctl+0x10/0x10
[ 6.194607] [<c10624c2>] ? request_threaded_irq+0xb2/0x140
[ 6.194607] [<c1291196>] ? snd_es1688_create+0x96/0x330
[ 6.194607] [<c138365d>] ? snd_gusextreme_probe+0x18d/0x5a2
[ 6.194607] [<c11c9d80>] ? __driver_attach+0x80/0x80
[ 6.194607] [<c10db22f>] ? sysfs_create_link+0xf/0x20
[ 6.194607] [<c11c9d80>] ? __driver_attach+0x80/0x80
[ 6.194607] [<c11d1502>] ? isa_bus_probe+0x12/0x20
[ 6.194607] [<c11c9b95>] ? driver_probe_device+0x55/0x1c0
[ 6.194607] [<c13ae04f>] ? _raw_spin_unlock+0xf/0x30
[ 6.194607] [<c13705ea>] ? klist_next+0x6a/0xe0
[ 6.194607] [<c11d15c1>] ? isa_bus_match+0x21/0x40
[ 6.194607] [<c11c8a24>] ? bus_for_each_drv+0x34/0x70
[ 6.194607] [<c11c9e4b>] ? device_attach+0x7b/0x90
[ 6.194607] [<c11c9d80>] ? __driver_attach+0x80/0x80
[ 6.194607] [<c11c8bff>] ? bus_probe_device+0x5f/0x80
[ 6.194607] [<c11c7493>] ? device_add+0x573/0x620
[ 6.194607] [<c1042820>] ? complete_all+0x40/0x60
[ 6.194607] [<c13ae08a>] ? _raw_spin_unlock_irqrestore+0x1a/0x30
[ 6.194607] [<c11d16c6>] ? isa_register_driver+0xb6/0x150
[ 6.194607] [<c15c9002>] ? alsa_card_gusmax_init+0xf/0xf
[ 6.194607] [<c15a99bc>] ? do_one_initcall+0x7f/0x12b
[ 6.194607] [<c15a9b7a>] ? kernel_init+0x112/0x1a9
[ 6.194607] [<c15a9423>] ? do_early_param+0x77/0x77
[ 6.194607] [<c15a9a68>] ? do_one_initcall+0x12b/0x12b
[ 6.194607] [<c13aefbe>] ? kernel_thread_helper+0x6/0xd
[ 6.210779] es1688: can't grab IRQ 5
[ 6.211305] gusextreme: probe of gusextreme.0 failed with error -16
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
---
include/sound/es1688.h | 1
sound/isa/es1688/es1688_lib.c | 34 +++++++++++++++++++++-----------
2 files changed, 24 insertions(+), 11 deletions(-)
--- linux.orig/sound/isa/es1688/es1688_lib.c 2012-07-29 18:59:09.820640797 +0800
+++ linux/sound/isa/es1688/es1688_lib.c 2012-07-29 18:59:11.576640840 +0800
@@ -612,10 +612,10 @@ static int snd_es1688_capture_close(stru
static int snd_es1688_free(struct snd_es1688 *chip)
{
- if (chip->res_port) {
+ if (chip->hardware != ES1688_HW_UNDEF)
snd_es1688_init(chip, 0);
+ if (chip->res_port)
release_and_free_resource(chip->res_port);
- }
if (chip->irq >= 0)
free_irq(chip->irq, (void *) chip);
if (chip->dma8 >= 0) {
@@ -657,19 +657,27 @@ int snd_es1688_create(struct snd_card *c
return -ENOMEM;
chip->irq = -1;
chip->dma8 = -1;
+ chip->hardware = ES1688_HW_UNDEF;
- if ((chip->res_port = request_region(port + 4, 12, "ES1688")) == NULL) {
+ chip->res_port = request_region(port + 4, 12, "ES1688");
+ if (chip->res_port == NULL) {
snd_printk(KERN_ERR "es1688: can't grab port 0x%lx\n", port + 4);
- return -EBUSY;
+ err = -EBUSY;
+ goto exit;
}
- if (request_irq(irq, snd_es1688_interrupt, 0, "ES1688", (void *) chip)) {
+
+ err = request_irq(irq, snd_es1688_interrupt, 0, "ES1688", (void *) chip);
+ if (err < 0) {
snd_printk(KERN_ERR "es1688: can't grab IRQ %d\n", irq);
- return -EBUSY;
+ goto exit;
}
+
chip->irq = irq;
- if (request_dma(dma8, "ES1688")) {
+ err = request_dma(dma8, "ES1688");
+
+ if (err < 0) {
snd_printk(KERN_ERR "es1688: can't grab DMA8 %d\n", dma8);
- return -EBUSY;
+ goto exit;
}
chip->dma8 = dma8;
@@ -685,14 +693,18 @@ int snd_es1688_create(struct snd_card *c
err = snd_es1688_probe(chip);
if (err < 0)
- return err;
+ goto exit;
err = snd_es1688_init(chip, 1);
if (err < 0)
- return err;
+ goto exit;
/* Register device */
- return snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+ err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
+exit:
+ if (err)
+ snd_es1688_free(chip);
+ return err;
}
static struct snd_pcm_ops snd_es1688_playback_ops = {
--- linux.orig/include/sound/es1688.h 2012-07-29 18:59:09.820640797 +0800
+++ linux/include/sound/es1688.h 2012-07-29 18:59:13.000640873 +0800
@@ -29,6 +29,7 @@
#define ES1688_HW_AUTO 0x0000
#define ES1688_HW_688 0x0001
#define ES1688_HW_1688 0x0002
+#define ES1688_HW_UNDEF 0x0003
struct snd_es1688 {
unsigned long port; /* port of ESS chip */
next prev parent reply other threads:[~2012-07-29 11:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-28 13:20 genirq: Flags mismatch irq 5. 00000000 (ES1688) vs. 00000000 Fengguang Wu
2012-07-28 15:13 ` Daniel Mack
2012-07-29 7:59 ` Takashi Iwai
2012-07-29 11:39 ` Fengguang Wu [this message]
2012-07-29 14:23 ` [PATCH] es1688 - freeup resources on init failure Daniel Mack
2012-07-30 8:23 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120729113909.GA14106@localhost \
--to=fengguang.wu@intel.com \
--cc=alsa-devel@alsa-project.org \
--cc=krzysztof.h1@wp.pl \
--cc=linux-kernel@vger.kernel.org \
--cc=rene.herman@gmail.com \
--cc=tiwai@suse.de \
--cc=zonque@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).