From: Joerg Roedel <joerg.roedel@amd.com>
To: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Cc: <x86@kernel.org>, <linux-kernel@vger.kernel.org>,
<joro@8bytes.org>, Suresh Siddha <suresh.b.siddha@intel.com>,
Yinghai Lu <yinghai@kernel.org>
Subject: Re: [PATCH 18/19] x86, io_apic: Introduce eoi_ioapic_pin call-back
Date: Tue, 25 Sep 2012 17:09:05 +0200 [thread overview]
Message-ID: <20120925150905.GD2505@amd.com> (raw)
In-Reply-To: <20120826185233.GJ3690@breakpoint.cc>
On Sun, Aug 26, 2012 at 08:52:33PM +0200, Sebastian Andrzej Siewior wrote:
> Basically you shuffle the code from up there, down there and call from behind
> a function pointer. There are two things different this time:
> - no version check >= 0x20
> I belive this is obsolete since this runs only on x86-64 with x(2)apic
> support and assumes more or less version 0x20+ or we wouldn't be here at
> all.
Right, all systems that have interrupt remapping have an io-apic version
of 0x20 or higher.
> - the irq_remapped(cfg) check is gone. The cfg thing is per-interrupt basis
> created so you _now_ you act like the interrupt is remapped even if it is
> not. Or am I wrong here?
That comes from the fact that with the current implementation (with and
without my patches) IO-APIC interrupts are always remapped. So it is
safe to remove that check.
> > +
> New line and the end? Why would that be?
Coding leftover, I'll remove that.
Joerg
--
AMD Operating System Research Center
Advanced Micro Devices GmbH Einsteinring 24 85609 Dornach
General Managers: Alberto Bozzo
Registration: Dornach, Landkr. Muenchen; Registerger. Muenchen, HRB Nr. 43632
next prev parent reply other threads:[~2012-09-25 15:09 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-20 13:55 [PATCH 00/19 v2] Improve IRQ remapping abstraction in x86 core code Joerg Roedel
2012-08-20 13:55 ` [PATCH 01/19] x86, apic: Move irq_remapping_enabled checks into IRQ-remapping code Joerg Roedel
2012-08-20 13:55 ` [PATCH 02/19] [RFC] x86, apic: Mask IO-APIC and PIC unconditionally on LAPIC resume Joerg Roedel
2012-08-23 20:58 ` Sebastian Andrzej Siewior
2012-08-20 13:55 ` [PATCH 03/19] x86, io_apic: Introduce x86_io_apic_ops.disable() Joerg Roedel
2012-08-23 21:11 ` Sebastian Andrzej Siewior
2012-08-24 12:22 ` Joerg Roedel
2012-08-25 17:17 ` Sebastian Andrzej Siewior
2012-08-26 9:56 ` Joerg Roedel
2012-08-20 13:55 ` [PATCH 04/19] x86, io_apic: Introduce x86_io_apic_ops.print_entries for debugging Joerg Roedel
2012-08-26 18:03 ` Sebastian Andrzej Siewior
2012-08-20 13:55 ` [PATCH 05/19] x86, hpet: Introduce x86_msi_ops.setup_hpet_msi Joerg Roedel
2012-08-20 13:55 ` [PATCH 06/19] x86, msi: Use IRQ remapping specific setup_msi_irqs routine Joerg Roedel
2012-08-26 18:10 ` Sebastian Andrzej Siewior
2012-08-20 13:55 ` [PATCH 07/19] x86, io_apic: Introduce set_affinity function pointer Joerg Roedel
2012-08-20 13:55 ` [PATCH 08/19] x86, io_apic: Convert setup_ioapic_entry to " Joerg Roedel
2012-08-20 13:55 ` [PATCH 09/19] x86, io_apic: Move irq_remapping_enabled checks out of check_timer() Joerg Roedel
2012-08-20 13:55 ` [PATCH 10/19] x86, io_apic: Introduce function pointer for setup_timer_IRQ0_pin Joerg Roedel
2012-08-26 18:16 ` Sebastian Andrzej Siewior
2012-09-25 12:57 ` Joerg Roedel
2012-08-20 13:55 ` [PATCH 11/19] x86, irq: Move irq_remapping_enabled declaration to iommu code Joerg Roedel
2012-08-20 13:55 ` [PATCH 12/19] x86, irq: Add data structure to keep AMD specific irq remapping information Joerg Roedel
2012-08-26 18:21 ` Sebastian Andrzej Siewior
2012-09-25 13:04 ` Joerg Roedel
2012-08-20 13:55 ` [PATCH 13/19] x86, io-apic: Move CONFIG_IRQ_REMAP code out of x86 core Joerg Roedel
2012-08-26 18:23 ` Sebastian Andrzej Siewior
2012-08-20 13:56 ` [PATCH 14/19] x86, io-apic: Remove !irq_remapped() check from __target_IO_APIC_irq() Joerg Roedel
2012-08-26 18:26 ` Sebastian Andrzej Siewior
2012-08-20 13:56 ` [PATCH 15/19] x86, irq: Move irq_remapped() check into free_remapped_irq Joerg Roedel
2012-08-26 18:27 ` Sebastian Andrzej Siewior
2012-09-25 13:29 ` Joerg Roedel
2012-08-20 13:56 ` [PATCH 16/19] x86, irq: Introduce setup_remapped_irq() Joerg Roedel
2012-08-26 18:30 ` Sebastian Andrzej Siewior
2012-09-25 13:43 ` Joerg Roedel
2012-08-20 13:56 ` [PATCH 17/19] x86, msi: Introduce x86_msi.compose_msi_msg call-back Joerg Roedel
2012-08-20 14:08 ` Konrad Rzeszutek Wilk
2012-08-21 8:40 ` Joerg Roedel
2012-08-21 14:42 ` Konrad Rzeszutek Wilk
2012-08-21 15:29 ` Joerg Roedel
2012-08-21 15:41 ` Joerg Roedel
2012-08-22 14:41 ` Joerg Roedel
2012-08-26 18:41 ` Sebastian Andrzej Siewior
2012-09-25 13:59 ` Joerg Roedel
2012-08-20 13:56 ` [PATCH 18/19] x86, io_apic: Introduce eoi_ioapic_pin call-back Joerg Roedel
2012-08-26 18:52 ` Sebastian Andrzej Siewior
2012-09-25 15:09 ` Joerg Roedel [this message]
2012-08-20 13:56 ` [PATCH 19/19] x86, irq: Move irq_remapped out of x86 core code Joerg Roedel
2012-08-26 19:17 ` [PATCH 00/19 v2] Improve IRQ remapping abstraction in " Sebastian Andrzej Siewior
2012-09-19 14:52 ` Joerg Roedel
2012-11-01 18:49 ` Sebastian Andrzej Siewior
-- strict thread matches above, loose matches on Subject: below --
2012-11-20 13:12 [PATCH 00/19 v4] " Joerg Roedel
2012-11-20 13:12 ` [PATCH 18/19] x86, io_apic: Introduce eoi_ioapic_pin call-back Joerg Roedel
2012-09-26 10:44 [PATCH 00/19 v3] Improve IRQ remapping abstraction in x86 core code Joerg Roedel
2012-09-26 10:44 ` [PATCH 18/19] x86, io_apic: Introduce eoi_ioapic_pin call-back Joerg Roedel
2012-08-07 15:43 [PATCH 0/19] Improve IRQ remapping abstraction in x86 core code Joerg Roedel
2012-08-07 15:43 ` [PATCH 18/19] x86, io_apic: Introduce eoi_ioapic_pin call-back Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120925150905.GD2505@amd.com \
--to=joerg.roedel@amd.com \
--cc=joro@8bytes.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sebastian@breakpoint.cc \
--cc=suresh.b.siddha@intel.com \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).