From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
alan@lxorguk.ukuu.org.uk, Flavio Leitner <fbl@redhat.com>
Subject: [ 14/33] serial: set correct baud_base for EXSYS EX-41092 Dual 16950
Date: Thu, 4 Oct 2012 14:26:36 -0700 [thread overview]
Message-ID: <20121004210600.240956019@linuxfoundation.org> (raw)
In-Reply-To: <20121004210558.383865383@linuxfoundation.org>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Flavio Leitner <fbl@redhat.com>
commit 26e8220adb0aec43b7acafa0f1431760eee28522 upstream.
Apparently the same card model has two IDs, so this patch
complements the commit 39aced68d664291db3324d0fcf0985ab5626aac2
adding the missing one.
Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/8250_pci.c | 9 +++++++--
include/linux/pci_ids.h | 1 -
2 files changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/tty/serial/8250_pci.c
+++ b/drivers/tty/serial/8250_pci.c
@@ -1011,6 +1011,8 @@ static int pci_eg20t_init(struct pci_dev
#define PCI_SUBDEVICE_ID_OCTPRO422 0x0208
#define PCI_SUBDEVICE_ID_POCTAL232 0x0308
#define PCI_SUBDEVICE_ID_POCTAL422 0x0408
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_00 0x2500
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530
#define PCI_VENDOR_ID_ADVANTECH 0x13fe
#define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620
@@ -3009,8 +3011,11 @@ static struct pci_device_id serial_pci_t
* For now just used the hex ID 0x950a.
*/
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
- PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0,
- pbn_b0_2_115200 },
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00,
+ 0, 0, pbn_b0_2_115200 },
+ { PCI_VENDOR_ID_OXSEMI, 0x950a,
+ PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30,
+ 0, 0, pbn_b0_2_115200 },
{ PCI_VENDOR_ID_OXSEMI, 0x950a,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_b0_2_1130000 },
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1818,7 +1818,6 @@
#define PCI_DEVICE_ID_SIIG_8S_20x_650 0x2081
#define PCI_DEVICE_ID_SIIG_8S_20x_850 0x2082
#define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL 0x2050
-#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL 0x2530
#define PCI_VENDOR_ID_RADISYS 0x1331
next prev parent reply other threads:[~2012-10-04 21:27 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-04 21:26 [ 00/33] 3.0.45-stable review Greg Kroah-Hartman
2012-10-04 21:26 ` [ 01/33] vfs: dcache: fix deadlock in tree traversal Greg Kroah-Hartman
2012-10-04 21:26 ` [ 02/33] dm: handle requests beyond end of device instead of using BUG_ON Greg Kroah-Hartman
2012-10-04 21:26 ` [ 03/33] USB: option: blacklist QMI interface on ZTE MF683 Greg Kroah-Hartman
2012-10-04 21:26 ` [ 04/33] USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Greg Kroah-Hartman
2012-10-04 21:26 ` [ 05/33] USB: qcaux: add Pantech vendor class match Greg Kroah-Hartman
2012-10-04 21:26 ` [ 06/33] staging: speakup_soft: Fix reading of init string Greg Kroah-Hartman
2012-10-04 21:26 ` [ 07/33] staging: comedi: s626: dont dereference insn->data Greg Kroah-Hartman
2012-10-04 21:26 ` [ 08/33] staging: comedi: jr3_pci: fix iomem dereference Greg Kroah-Hartman
2012-10-04 21:26 ` [ 09/33] staging: comedi: dont dereference user memory for INSN_INTTRIG Greg Kroah-Hartman
2012-10-04 21:26 ` [ 10/33] staging: comedi: fix memory leak for saved channel list Greg Kroah-Hartman
2012-10-04 21:26 ` [ 11/33] Remove BUG_ON from n_tty_read() Greg Kroah-Hartman
2012-10-04 21:26 ` [ 12/33] TTY: ttyprintk, dont touch behind tty->write_buf Greg Kroah-Hartman
2012-10-04 21:26 ` [ 13/33] serial: pl011: handle corruption at high clock speeds Greg Kroah-Hartman
2012-10-04 21:26 ` Greg Kroah-Hartman [this message]
2012-10-04 21:26 ` [ 15/33] b43legacy: Fix crash on unload when firmware not available Greg Kroah-Hartman
2012-10-04 21:26 ` [ 16/33] firmware: Add missing attributes to EFI variable attribute print out from sysfs Greg Kroah-Hartman
2012-10-04 21:26 ` [ 17/33] xhci: Intel Panther Point BEI quirk Greg Kroah-Hartman
2012-10-04 21:26 ` [ 18/33] n_gsm: added interlocking for gsm_data_lock for certain code paths Greg Kroah-Hartman
2012-10-04 21:26 ` [ 19/33] coredump: prevent double-free on an error path in core dumper Greg Kroah-Hartman
2012-10-04 21:26 ` [ 20/33] Increase XHCI suspend timeout to 16ms Greg Kroah-Hartman
2012-10-04 21:26 ` [ 21/33] n_gsm: memory leak in uplink error path Greg Kroah-Hartman
2012-10-04 21:26 ` [ 22/33] UBI: fix autoresize handling in R/O mode Greg Kroah-Hartman
2012-10-04 21:26 ` [ 23/33] SCSI: ibmvscsi: Fix host config length field overflow Greg Kroah-Hartman
2012-10-04 21:26 ` [ 24/33] SCSI: hpsa: Use LUN reset instead of target reset Greg Kroah-Hartman
2012-10-04 21:26 ` [ 25/33] can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock() Greg Kroah-Hartman
2012-10-04 21:26 ` [ 26/33] IPoIB: Fix use-after-free of multicast object Greg Kroah-Hartman
2012-10-04 21:26 ` [ 27/33] IB/srp: Fix use-after-free in srp_reset_req() Greg Kroah-Hartman
2012-10-04 21:26 ` [ 28/33] IB/srp: Avoid having aborted requests hang Greg Kroah-Hartman
2012-10-04 21:26 ` [ 29/33] isci: fix isci_pci_probe() generates warning on efi failure path Greg Kroah-Hartman
2012-10-04 21:26 ` [ 30/33] x86/alternatives: Fix p6 nops on non-modular kernels Greg Kroah-Hartman
2012-10-04 21:26 ` [ 31/33] PCI: honor child buses add_size in hot plug configuration Greg Kroah-Hartman
2012-10-04 21:26 ` [ 32/33] SCSI: scsi_remove_target: fix softlockup regression on hot remove Greg Kroah-Hartman
2012-10-04 21:26 ` [ 33/33] SCSI: scsi_dh_alua: Enable STPG for unavailable ports Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121004210600.240956019@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=fbl@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).