From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
alan@lxorguk.ukuu.org.uk, Michael Spang <spang@chromium.org>,
Sarah Sharp <sarah.a.sharp@linux.intel.com>
Subject: [ 20/33] Increase XHCI suspend timeout to 16ms
Date: Thu, 4 Oct 2012 14:26:42 -0700 [thread overview]
Message-ID: <20121004210600.967087722@linuxfoundation.org> (raw)
In-Reply-To: <20121004210558.383865383@linuxfoundation.org>
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Spang <spang@chromium.org>
commit a6e097dfdfd189b6929af6efa1d289af61858386 upstream.
The Intel XHCI specification says that after clearing the run/stop bit
the controller may take up to 16ms to halt. We've seen a device take
14ms, which with the current timeout of 10ms causes the kernel to
abort the suspend. Increasing the timeout to the recommended value
fixes the problem.
This patch should be backported to kernels as old as 2.6.37, that
contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI:
PCI power management implementation".
Signed-off-by: Michael Spang <spang@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -720,7 +720,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
command &= ~CMD_RUN;
xhci_writel(xhci, command, &xhci->op_regs->command);
if (handshake(xhci, &xhci->op_regs->status,
- STS_HALT, STS_HALT, 100*100)) {
+ STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) {
xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
spin_unlock_irq(&xhci->lock);
return -ETIMEDOUT;
next prev parent reply other threads:[~2012-10-04 21:33 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-04 21:26 [ 00/33] 3.0.45-stable review Greg Kroah-Hartman
2012-10-04 21:26 ` [ 01/33] vfs: dcache: fix deadlock in tree traversal Greg Kroah-Hartman
2012-10-04 21:26 ` [ 02/33] dm: handle requests beyond end of device instead of using BUG_ON Greg Kroah-Hartman
2012-10-04 21:26 ` [ 03/33] USB: option: blacklist QMI interface on ZTE MF683 Greg Kroah-Hartman
2012-10-04 21:26 ` [ 04/33] USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Greg Kroah-Hartman
2012-10-04 21:26 ` [ 05/33] USB: qcaux: add Pantech vendor class match Greg Kroah-Hartman
2012-10-04 21:26 ` [ 06/33] staging: speakup_soft: Fix reading of init string Greg Kroah-Hartman
2012-10-04 21:26 ` [ 07/33] staging: comedi: s626: dont dereference insn->data Greg Kroah-Hartman
2012-10-04 21:26 ` [ 08/33] staging: comedi: jr3_pci: fix iomem dereference Greg Kroah-Hartman
2012-10-04 21:26 ` [ 09/33] staging: comedi: dont dereference user memory for INSN_INTTRIG Greg Kroah-Hartman
2012-10-04 21:26 ` [ 10/33] staging: comedi: fix memory leak for saved channel list Greg Kroah-Hartman
2012-10-04 21:26 ` [ 11/33] Remove BUG_ON from n_tty_read() Greg Kroah-Hartman
2012-10-04 21:26 ` [ 12/33] TTY: ttyprintk, dont touch behind tty->write_buf Greg Kroah-Hartman
2012-10-04 21:26 ` [ 13/33] serial: pl011: handle corruption at high clock speeds Greg Kroah-Hartman
2012-10-04 21:26 ` [ 14/33] serial: set correct baud_base for EXSYS EX-41092 Dual 16950 Greg Kroah-Hartman
2012-10-04 21:26 ` [ 15/33] b43legacy: Fix crash on unload when firmware not available Greg Kroah-Hartman
2012-10-04 21:26 ` [ 16/33] firmware: Add missing attributes to EFI variable attribute print out from sysfs Greg Kroah-Hartman
2012-10-04 21:26 ` [ 17/33] xhci: Intel Panther Point BEI quirk Greg Kroah-Hartman
2012-10-04 21:26 ` [ 18/33] n_gsm: added interlocking for gsm_data_lock for certain code paths Greg Kroah-Hartman
2012-10-04 21:26 ` [ 19/33] coredump: prevent double-free on an error path in core dumper Greg Kroah-Hartman
2012-10-04 21:26 ` Greg Kroah-Hartman [this message]
2012-10-04 21:26 ` [ 21/33] n_gsm: memory leak in uplink error path Greg Kroah-Hartman
2012-10-04 21:26 ` [ 22/33] UBI: fix autoresize handling in R/O mode Greg Kroah-Hartman
2012-10-04 21:26 ` [ 23/33] SCSI: ibmvscsi: Fix host config length field overflow Greg Kroah-Hartman
2012-10-04 21:26 ` [ 24/33] SCSI: hpsa: Use LUN reset instead of target reset Greg Kroah-Hartman
2012-10-04 21:26 ` [ 25/33] can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock() Greg Kroah-Hartman
2012-10-04 21:26 ` [ 26/33] IPoIB: Fix use-after-free of multicast object Greg Kroah-Hartman
2012-10-04 21:26 ` [ 27/33] IB/srp: Fix use-after-free in srp_reset_req() Greg Kroah-Hartman
2012-10-04 21:26 ` [ 28/33] IB/srp: Avoid having aborted requests hang Greg Kroah-Hartman
2012-10-04 21:26 ` [ 29/33] isci: fix isci_pci_probe() generates warning on efi failure path Greg Kroah-Hartman
2012-10-04 21:26 ` [ 30/33] x86/alternatives: Fix p6 nops on non-modular kernels Greg Kroah-Hartman
2012-10-04 21:26 ` [ 31/33] PCI: honor child buses add_size in hot plug configuration Greg Kroah-Hartman
2012-10-04 21:26 ` [ 32/33] SCSI: scsi_remove_target: fix softlockup regression on hot remove Greg Kroah-Hartman
2012-10-04 21:26 ` [ 33/33] SCSI: scsi_dh_alua: Enable STPG for unavailable ports Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121004210600.967087722@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=sarah.a.sharp@linux.intel.com \
--cc=spang@chromium.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).