linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	alan@lxorguk.ukuu.org.uk, Mike Snitzer <snitzer@redhat.com>,
	Mikulas Patocka <mpatocka@redhat.com>,
	Alasdair G Kergon <agk@redhat.com>
Subject: [ 02/58] dm mpath: only retry ioctl when no paths if queue_if_no_path set
Date: Thu,  4 Oct 2012 14:19:09 -0700	[thread overview]
Message-ID: <20121004210635.744310869@linuxfoundation.org> (raw)
In-Reply-To: <20121004210635.449598766@linuxfoundation.org>

3.5-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <snitzer@redhat.com>

commit 7ba10aa6fbac7158a50bec142132b04bc480bb29 upstream.

When there are no paths and multipath receives an ioctl, it waits until
a path becomes available.  This behaviour is incorrect if the
"queue_if_no_path" setting was not specified, as then the ioctl should
be rejected immediately, which this patch now does.

commit 35991652b ("dm mpath: allow ioctls to trigger pg init") should
have checked if queue_if_no_path was configured before queueing IO.

Checking for the queue_if_no_path feature, like is done in map_io(),
allows the following table load to work without blocking in the
multipath_ioctl retry loop:

  echo "0 1024 multipath 0 0 0 0" | dmsetup create mpath_nodevs

Without this fix the multipath_ioctl will block with the following stack
trace:

  blkid           D 0000000000000002     0 23936      1 0x00000000
   ffff8802b89e5cd8 0000000000000082 ffff8802b89e5fd8 0000000000012440
   ffff8802b89e4010 0000000000012440 0000000000012440 0000000000012440
   ffff8802b89e5fd8 0000000000012440 ffff88030c2aab30 ffff880325794040
  Call Trace:
   [<ffffffff814ce099>] schedule+0x29/0x70
   [<ffffffff814cc312>] schedule_timeout+0x182/0x2e0
   [<ffffffff8104dee0>] ? lock_timer_base+0x70/0x70
   [<ffffffff814cc48e>] schedule_timeout_uninterruptible+0x1e/0x20
   [<ffffffff8104f840>] msleep+0x20/0x30
   [<ffffffffa0000839>] multipath_ioctl+0x109/0x170 [dm_multipath]
   [<ffffffffa06bfb9c>] dm_blk_ioctl+0xbc/0xd0 [dm_mod]
   [<ffffffff8122a408>] __blkdev_driver_ioctl+0x28/0x30
   [<ffffffff8122a79e>] blkdev_ioctl+0xce/0x730
   [<ffffffff811970ac>] block_ioctl+0x3c/0x40
   [<ffffffff8117321c>] do_vfs_ioctl+0x8c/0x340
   [<ffffffff81166293>] ? sys_newfstat+0x33/0x40
   [<ffffffff81173571>] sys_ioctl+0xa1/0xb0
   [<ffffffff814d70a9>] system_call_fastpath+0x16/0x1b

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-mpath.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1520,6 +1520,7 @@ static int multipath_ioctl(struct dm_tar
 			   unsigned long arg)
 {
 	struct multipath *m = ti->private;
+	struct pgpath *pgpath;
 	struct block_device *bdev;
 	fmode_t mode;
 	unsigned long flags;
@@ -1535,12 +1536,14 @@ again:
 	if (!m->current_pgpath)
 		__choose_pgpath(m, 0);
 
-	if (m->current_pgpath) {
-		bdev = m->current_pgpath->path.dev->bdev;
-		mode = m->current_pgpath->path.dev->mode;
+	pgpath = m->current_pgpath;
+
+	if (pgpath) {
+		bdev = pgpath->path.dev->bdev;
+		mode = pgpath->path.dev->mode;
 	}
 
-	if (m->queue_io)
+	if ((pgpath && m->queue_io) || (!pgpath && m->queue_if_no_path))
 		r = -EAGAIN;
 	else if (!bdev)
 		r = -EIO;



  parent reply	other threads:[~2012-10-04 22:06 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-04 21:19 [ 00/58] 3.5.6-stable review Greg Kroah-Hartman
2012-10-04 21:19 ` [ 01/58] vfs: dcache: fix deadlock in tree traversal Greg Kroah-Hartman
2012-10-04 21:19 ` Greg Kroah-Hartman [this message]
2012-10-04 21:19 ` [ 03/58] dm: handle requests beyond end of device instead of using BUG_ON Greg Kroah-Hartman
2012-10-04 21:19 ` [ 04/58] dm table: clear add_random unless all devices have it set Greg Kroah-Hartman
2012-10-04 21:19 ` [ 05/58] dm verity: fix overflow check Greg Kroah-Hartman
2012-10-04 21:19 ` [ 06/58] usb: gadget: make g_printer enumerate again Greg Kroah-Hartman
2012-10-04 21:19 ` [ 07/58] usb: gadget: initialize the strings in tcm_usb_gadget properly Greg Kroah-Hartman
2012-10-04 21:19 ` [ 08/58] USB: option: blacklist QMI interface on ZTE MF683 Greg Kroah-Hartman
2012-10-04 21:19 ` [ 09/58] USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support Greg Kroah-Hartman
2012-10-04 21:19 ` [ 10/58] USB: qcaux: add Pantech vendor class match Greg Kroah-Hartman
2012-10-04 21:19 ` [ 11/58] usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems Greg Kroah-Hartman
2012-10-04 21:19 ` [ 12/58] USB: serial: fix up bug with missing {} Greg Kroah-Hartman
2012-10-04 21:19 ` [ 13/58] staging: speakup_soft: Fix reading of init string Greg Kroah-Hartman
2012-10-04 21:19 ` [ 14/58] tty: keyboard.c: Remove locking from vt_get_leds Greg Kroah-Hartman
2012-10-04 21:19 ` [ 15/58] staging: r8712u: Do not queue cloned skb Greg Kroah-Hartman
2012-10-04 21:19 ` [ 16/58] staging: comedi: s626: dont dereference insn->data Greg Kroah-Hartman
2012-10-04 21:19 ` [ 17/58] staging: comedi: jr3_pci: fix iomem dereference Greg Kroah-Hartman
2012-10-04 21:19 ` [ 18/58] staging: comedi: dont dereference user memory for INSN_INTTRIG Greg Kroah-Hartman
2012-10-04 21:19 ` [ 19/58] staging: comedi: fix memory leak for saved channel list Greg Kroah-Hartman
2012-10-04 21:19 ` [ 20/58] Remove BUG_ON from n_tty_read() Greg Kroah-Hartman
2012-10-04 21:19 ` [ 21/58] TTY: ttyprintk, dont touch behind tty->write_buf Greg Kroah-Hartman
2012-10-04 21:19 ` [ 22/58] serial: omap: fix software flow control Greg Kroah-Hartman
2012-10-04 21:19 ` [ 23/58] serial: pl011: handle corruption at high clock speeds Greg Kroah-Hartman
2012-10-04 21:19 ` [ 24/58] serial: set correct baud_base for EXSYS EX-41092 Dual 16950 Greg Kroah-Hartman
2012-10-04 21:19 ` [ 25/58] tools/hv: Fix file handle leak Greg Kroah-Hartman
2012-10-04 21:19 ` [ 26/58] tools/hv: Fix exit() error code Greg Kroah-Hartman
2012-10-04 21:19 ` [ 27/58] tools/hv: Check for read/write errors Greg Kroah-Hartman
2012-10-04 21:19 ` [ 28/58] b43legacy: Fix crash on unload when firmware not available Greg Kroah-Hartman
2012-10-04 21:19 ` [ 29/58] firmware: Add missing attributes to EFI variable attribute print out from sysfs Greg Kroah-Hartman
2012-10-04 21:19 ` [ 30/58] xhci: Intel Panther Point BEI quirk Greg Kroah-Hartman
2012-10-04 21:19 ` [ 31/58] xHCI: add cmd_ring_state Greg Kroah-Hartman
2012-10-04 21:19 ` [ 32/58] xHCI: add aborting command ring function Greg Kroah-Hartman
2012-10-04 21:19 ` [ 33/58] xHCI: cancel command after command timeout Greg Kroah-Hartman
2012-10-04 21:19 ` [ 34/58] xHCI: handle command after aborting the command ring Greg Kroah-Hartman
2012-10-04 21:19 ` [ 35/58] Increase XHCI suspend timeout to 16ms Greg Kroah-Hartman
2012-10-04 21:19 ` [ 36/58] HID: keep dev_rdesc unmodified and use it for comparisons Greg Kroah-Hartman
2012-10-04 21:19 ` [ 37/58] ath9k: Disable ASPM only for AR9285 Greg Kroah-Hartman
2012-10-04 21:19 ` [ 38/58] xen/pciback: Restore the PCI config space after an FLR Greg Kroah-Hartman
2012-10-04 21:19 ` [ 39/58] coredump: prevent double-free on an error path in core dumper Greg Kroah-Hartman
2012-10-04 21:19 ` [ 40/58] n_gsm.c: Implement 3GPP27.010 DLC start-up procedure in MUX Greg Kroah-Hartman
2012-10-04 21:19 ` [ 41/58] n_gsm: uplink SKBs accumulate on list Greg Kroah-Hartman
2012-10-04 21:19 ` [ 42/58] n_gsm: added interlocking for gsm_data_lock for certain code paths Greg Kroah-Hartman
2012-10-04 21:19 ` [ 43/58] n_gsm: memory leak in uplink error path Greg Kroah-Hartman
2012-10-04 21:19 ` [ 44/58] UBI: fix autoresize handling in R/O mode Greg Kroah-Hartman
2012-10-04 21:19 ` [ 45/58] UBI: erase free PEB with bitflip in EC header Greg Kroah-Hartman
2012-10-04 21:19 ` [ 46/58] Yama: handle 32-bit userspace prctl Greg Kroah-Hartman
2012-10-04 21:19 ` [ 47/58] SCSI: ibmvscsi: Fix host config length field overflow Greg Kroah-Hartman
2012-10-04 21:19 ` [ 48/58] SCSI: hpsa: Use LUN reset instead of target reset Greg Kroah-Hartman
2012-10-04 21:19 ` [ 49/58] can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock() Greg Kroah-Hartman
2012-10-04 21:19 ` [ 50/58] remoteproc: select VIRTIO to avoid build breakage Greg Kroah-Hartman
2012-10-04 21:19 ` [ 51/58] remoteproc: fix a potential NULL-dereference on cleanup Greg Kroah-Hartman
2012-10-04 21:19 ` [ 52/58] IPoIB: Fix use-after-free of multicast object Greg Kroah-Hartman
2012-10-04 21:20 ` [ 53/58] IB/srp: Fix use-after-free in srp_reset_req() Greg Kroah-Hartman
2012-10-04 21:20 ` [ 54/58] IB/srp: Avoid having aborted requests hang Greg Kroah-Hartman
2012-10-04 21:20 ` [ 55/58] isci: fix isci_pci_probe() generates warning on efi failure path Greg Kroah-Hartman
2012-10-04 21:20 ` [ 56/58] x86/alternatives: Fix p6 nops on non-modular kernels Greg Kroah-Hartman
2012-10-04 21:20 ` [ 57/58] SCSI: scsi_remove_target: fix softlockup regression on hot remove Greg Kroah-Hartman
2012-10-04 21:20 ` [ 58/58] SCSI: scsi_dh_alua: Enable STPG for unavailable ports Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121004210635.744310869@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=agk@redhat.com \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpatocka@redhat.com \
    --cc=snitzer@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).