[ 00/52] 3.4.13-stable review

[ 00/52] 3.4.13-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.4.13 release.
There are 52 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sat Oct  6 21:03:33 UTC 2012.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.13-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Bart Van Assche <bvanassche@acm.org>
    SCSI: scsi_dh_alua: Enable STPG for unavailable ports

Dan Williams <djbw@fb.com>
    SCSI: scsi_remove_target: fix softlockup regression on hot remove

Avi Kivity <avi@redhat.com>
    x86/alternatives: Fix p6 nops on non-modular kernels

Dan Williams <dan.j.williams@intel.com>
    isci: fix isci_pci_probe() generates warning on efi failure path

Bart Van Assche <bvanassche@acm.org>
    IB/srp: Avoid having aborted requests hang

Bart Van Assche <bvanassche@acm.org>
    IB/srp: Fix use-after-free in srp_reset_req()

Patrick McHardy <kaber@trash.net>
    IPoIB: Fix use-after-free of multicast object

Dan Carpenter <dan.carpenter@oracle.com>
    remoteproc: fix a potential NULL-dereference on cleanup

Ohad Ben-Cohen <ohad@wizery.com>
    remoteproc: select VIRTIO to avoid build breakage

Wei Yongjun <yongjun_wei@trendmicro.com.cn>
    can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock()

Stephen M. Cameron <scameron@beardog.cce.hp.com>
    SCSI: hpsa: Use LUN reset instead of target reset

Benjamin Herrenschmidt <benh@kernel.crashing.org>
    SCSI: ibmvscsi: Fix host config length field overflow

Kees Cook <keescook@chromium.org>
    Yama: handle 32-bit userspace prctl

Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
    UBI: fix autoresize handling in R/O mode

Russ Gorby <russ.gorby@intel.com>
    n_gsm: memory leak in uplink error path

Russ Gorby <russ.gorby@intel.com>
    n_gsm: added interlocking for gsm_data_lock for certain code paths

Russ Gorby <russ.gorby@intel.com>
    n_gsm: uplink SKBs accumulate on list

xiaojin <jin.xiao@intel.com>
    n_gsm.c: Implement 3GPP27.010 DLC start-up procedure in MUX

Denys Vlasenko <vda.linux@googlemail.com>
    coredump: prevent double-free on an error path in core dumper

Sujith Manoharan <c_manoha@qualcomm.com>
    ath9k: Disable ASPM only for AR9285

Michael Spang <spang@chromium.org>
    Increase XHCI suspend timeout to 16ms

Elric Fu <elricfu1@gmail.com>
    xHCI: handle command after aborting the command ring

Elric Fu <elricfu1@gmail.com>
    xHCI: cancel command after command timeout

Elric Fu <elricfu1@gmail.com>
    xHCI: add aborting command ring function

Elric Fu <elricfu1@gmail.com>
    xHCI: add cmd_ring_state

Sarah Sharp <sarah.a.sharp@linux.intel.com>
    xhci: Intel Panther Point BEI quirk.

Khalid Aziz <khalid.aziz@hp.com>
    firmware: Add missing attributes to EFI variable attribute print out from sysfs

Larry Finger <Larry.Finger@lwfinger.net>
    b43legacy: Fix crash on unload when firmware not available

Ben Hutchings <ben@decadent.org.uk>
    tools/hv: Check for read/write errors

Ben Hutchings <ben@decadent.org.uk>
    tools/hv: Fix exit() error code

Ben Hutchings <ben@decadent.org.uk>
    tools/hv: Fix file handle leak

Flavio Leitner <fbl@redhat.com>
    serial: set correct baud_base for EXSYS EX-41092 Dual 16950

Linus Walleij <linus.walleij@linaro.org>
    serial: pl011: handle corruption at high clock speeds

Vikram Pandita <vikram.pandita@ti.com>
    serial: omap: fix software flow control

Jiri Slaby <jslaby@suse.cz>
    TTY: ttyprintk, don't touch behind tty->write_buf

Stanislav Kozina <skozina@redhat.com>
    Remove BUG_ON from n_tty_read()

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: fix memory leak for saved channel list

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: don't dereference user memory for INSN_INTTRIG

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: jr3_pci: fix iomem dereference

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: s626: don't dereference insn->data

Larry Finger <Larry.Finger@lwfinger.net>
    staging: r8712u: Do not queue cloned skb

Christopher Brannon <chris@the-brannons.com>
    tty: keyboard.c: Remove locking from vt_get_leds.

Ben Hutchings <ben@decadent.org.uk>
    staging: speakup_soft: Fix reading of init string

Vivek Gautam <gautam.vivek@samsung.com>
    usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems

Bjørn Mork <bjorn@mork.no>
    USB: qcaux: add Pantech vendor class match

Antonio Ospite <ospite@studenti.unina.it>
    USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support

Bjørn Mork <bjorn@mork.no>
    USB: option: blacklist QMI interface on ZTE MF683

Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
    usb: gadget: dummy_hcd: fixup error probe path

Mikulas Patocka <mpatocka@redhat.com>
    dm verity: fix overflow check

Milan Broz <mbroz@redhat.com>
    dm table: clear add_random unless all devices have it set

Mike Snitzer <snitzer@redhat.com>
    dm: handle requests beyond end of device instead of using BUG_ON

Miklos Szeredi <miklos@szeredi.hu>
    vfs: dcache: fix deadlock in tree traversal


-------------

Diffstat:

 Makefile                                       |   4 +-
 arch/arm/plat-omap/include/plat/omap-serial.h  |   4 +-
 arch/x86/kernel/alternative.c                  |   2 +-
 drivers/char/ttyprintk.c                       |   2 +-
 drivers/firmware/efivars.c                     |  17 +-
 drivers/infiniband/ulp/ipoib/ipoib_main.c      |   2 +-
 drivers/infiniband/ulp/ipoib/ipoib_multicast.c |  19 +-
 drivers/infiniband/ulp/srp/ib_srp.c            |   3 +-
 drivers/md/dm-table.c                          |  26 ++-
 drivers/md/dm-verity.c                         |   8 +-
 drivers/md/dm.c                                |  56 +++--
 drivers/mtd/ubi/build.c                        |   5 +
 drivers/net/can/mscan/mpc5xxx_can.c            |   4 +-
 drivers/net/wireless/ath/ath9k/pci.c           |   5 +-
 drivers/net/wireless/b43legacy/main.c          |   2 +
 drivers/remoteproc/Kconfig                     |   1 +
 drivers/remoteproc/remoteproc_core.c           |  22 +-
 drivers/scsi/device_handler/scsi_dh_alua.c     |   3 +-
 drivers/scsi/hpsa.c                            |   2 +-
 drivers/scsi/ibmvscsi/ibmvscsi.c               |   3 +
 drivers/scsi/isci/init.c                       |   1 -
 drivers/scsi/isci/probe_roms.c                 |   1 -
 drivers/scsi/scsi_sysfs.c                      |  30 ++-
 drivers/staging/comedi/comedi_fops.c           |   5 +-
 drivers/staging/comedi/drivers/jr3_pci.c       |   2 +-
 drivers/staging/comedi/drivers/s626.c          |   2 +-
 drivers/staging/rtl8712/rtl8712_recv.c         |   5 +-
 drivers/staging/speakup/speakup_soft.c         |  13 +-
 drivers/tty/n_gsm.c                            |  26 ++-
 drivers/tty/n_tty.c                            |   3 +-
 drivers/tty/serial/8250/8250_pci.c             |   9 +-
 drivers/tty/serial/amba-pl011.c                |  15 +-
 drivers/tty/serial/omap-serial.c               |  12 +-
 drivers/tty/vt/keyboard.c                      |   3 -
 drivers/usb/gadget/dummy_hcd.c                 |   8 +-
 drivers/usb/host/xhci-mem.c                    |   7 +
 drivers/usb/host/xhci-pci.c                    |   1 +
 drivers/usb/host/xhci-ring.c                   | 286 ++++++++++++++++++++++++-
 drivers/usb/host/xhci.c                        |  38 +++-
 drivers/usb/host/xhci.h                        |  20 ++
 drivers/usb/serial/ftdi_sio.c                  |   2 +
 drivers/usb/serial/ftdi_sio_ids.h              |   5 +
 drivers/usb/serial/option.c                    |   3 +-
 drivers/usb/serial/qcaux.c                     |  10 +-
 fs/binfmt_elf.c                                |  19 +-
 fs/dcache.c                                    |   6 +
 include/linux/pci_ids.h                        |   1 -
 security/yama/yama_lsm.c                       |   2 +-
 tools/hv/hv_kvp_daemon.c                       |  45 ++--
 49 files changed, 594 insertions(+), 176 deletions(-)

[ 01/52] vfs: dcache: fix deadlock in tree traversal

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <miklos@szeredi.hu>

commit 8110e16d42d587997bcaee0c864179e6d93603fe upstream.

IBM reported a deadlock in select_parent().  This was found to be caused
by taking rename_lock when already locked when restarting the tree
traversal.

There are two cases when the traversal needs to be restarted:

 1) concurrent d_move(); this can only happen when not already locked,
    since taking rename_lock protects against concurrent d_move().

 2) racing with final d_put() on child just at the moment of ascending
    to parent; rename_lock doesn't protect against this rare race, so it
    can happen when already locked.

Because of case 2, we need to be able to handle restarting the traversal
when rename_lock is already held.  This patch fixes all three callers of
try_to_ascend().

IBM reported that the deadlock is gone with this patch.

[ I rewrote the patch to be smaller and just do the "goto again" if the
  lock was already held, but credit goes to Miklos for the real work.
   - Linus ]

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/dcache.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -1116,6 +1116,8 @@ positive:
 	return 1;
 
 rename_retry:
+	if (locked)
+		goto again;
 	locked = 1;
 	write_seqlock(&rename_lock);
 	goto again;
@@ -1218,6 +1220,8 @@ out:
 rename_retry:
 	if (found)
 		return found;
+	if (locked)
+		goto again;
 	locked = 1;
 	write_seqlock(&rename_lock);
 	goto again;
@@ -2963,6 +2967,8 @@ resume:
 	return;
 
 rename_retry:
+	if (locked)
+		goto again;
 	locked = 1;
 	write_seqlock(&rename_lock);
 	goto again;

[ 02/52] dm: handle requests beyond end of device instead of using BUG_ON

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <snitzer@redhat.com>

commit ba1cbad93dd47223b1f3b8edd50dd9ef2abcb2ed upstream.

The access beyond the end of device BUG_ON that was introduced to
dm_request_fn via commit 29e4013de7ad950280e4b2208 ("dm: implement
REQ_FLUSH/FUA support for request-based dm") was an overly
drastic (but simple) response to this situation.

I have received a report that this BUG_ON was hit and now think
it would be better to use dm_kill_unmapped_request() to fail the clone
and original request with -EIO.

map_request() will assign the valid target returned by
dm_table_find_target to tio->ti.  But when the target
isn't valid tio->ti is never assigned (because map_request isn't
called); so add a check for tio->ti != NULL to dm_done().

Reported-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm.c |   56 ++++++++++++++++++++++++++++++++++++++------------------
 1 file changed, 38 insertions(+), 18 deletions(-)

--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -865,10 +865,14 @@ static void dm_done(struct request *clon
 {
 	int r = error;
 	struct dm_rq_target_io *tio = clone->end_io_data;
-	dm_request_endio_fn rq_end_io = tio->ti->type->rq_end_io;
+	dm_request_endio_fn rq_end_io = NULL;
 
-	if (mapped && rq_end_io)
-		r = rq_end_io(tio->ti, clone, error, &tio->info);
+	if (tio->ti) {
+		rq_end_io = tio->ti->type->rq_end_io;
+
+		if (mapped && rq_end_io)
+			r = rq_end_io(tio->ti, clone, error, &tio->info);
+	}
 
 	if (r <= 0)
 		/* The target wants to complete the I/O */
@@ -1566,15 +1570,6 @@ static int map_request(struct dm_target
 	int r, requeued = 0;
 	struct dm_rq_target_io *tio = clone->end_io_data;
 
-	/*
-	 * Hold the md reference here for the in-flight I/O.
-	 * We can't rely on the reference count by device opener,
-	 * because the device may be closed during the request completion
-	 * when all bios are completed.
-	 * See the comment in rq_completed() too.
-	 */
-	dm_get(md);
-
 	tio->ti = ti;
 	r = ti->type->map_rq(ti, clone, &tio->info);
 	switch (r) {
@@ -1606,6 +1601,26 @@ static int map_request(struct dm_target
 	return requeued;
 }
 
+static struct request *dm_start_request(struct mapped_device *md, struct request *orig)
+{
+	struct request *clone;
+
+	blk_start_request(orig);
+	clone = orig->special;
+	atomic_inc(&md->pending[rq_data_dir(clone)]);
+
+	/*
+	 * Hold the md reference here for the in-flight I/O.
+	 * We can't rely on the reference count by device opener,
+	 * because the device may be closed during the request completion
+	 * when all bios are completed.
+	 * See the comment in rq_completed() too.
+	 */
+	dm_get(md);
+
+	return clone;
+}
+
 /*
  * q->request_fn for request-based dm.
  * Called with the queue lock held.
@@ -1635,14 +1650,21 @@ static void dm_request_fn(struct request
 			pos = blk_rq_pos(rq);
 
 		ti = dm_table_find_target(map, pos);
-		BUG_ON(!dm_target_is_valid(ti));
+		if (!dm_target_is_valid(ti)) {
+			/*
+			 * Must perform setup, that dm_done() requires,
+			 * before calling dm_kill_unmapped_request
+			 */
+			DMERR_LIMIT("request attempted access beyond the end of device");
+			clone = dm_start_request(md, rq);
+			dm_kill_unmapped_request(clone, -EIO);
+			continue;
+		}
 
 		if (ti->type->busy && ti->type->busy(ti))
 			goto delay_and_out;
 
-		blk_start_request(rq);
-		clone = rq->special;
-		atomic_inc(&md->pending[rq_data_dir(clone)]);
+		clone = dm_start_request(md, rq);
 
 		spin_unlock(q->queue_lock);
 		if (map_request(ti, clone, md))
@@ -1662,8 +1684,6 @@ delay_and_out:
 	blk_delay_queue(q, HZ / 10);
 out:
 	dm_table_put(map);
-
-	return;
 }
 
 int dm_underlying_device_busy(struct request_queue *q)

[ 03/52] dm table: clear add_random unless all devices have it set

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Milan Broz <mbroz@redhat.com>

commit c3c4555edd10dbc0b388a0125b9c50de5e79af05 upstream.

Always clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
have it set. Otherwise devices with predictable characteristics may
contribute entropy.

QUEUE_FLAG_ADD_RANDOM specifies whether or not queue IO timings
contribute to the random pool.

For bio-based targets this flag is always 0 because such devices have no
real queue.

For request-based devices this flag was always set to 1 by default.

Now set it according to the flags on underlying devices. If there is at
least one device which should not contribute, set the flag to zero: If a
device, such as fast SSD storage, is not suitable for supplying entropy,
a request-based queue stacked over it will not be either.

Because the checking logic is exactly same as for the rotational flag,
share the iteration function with device_is_nonrot().

Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-table.c |   26 ++++++++++++++++++++++----
 1 file changed, 22 insertions(+), 4 deletions(-)

--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -1351,17 +1351,25 @@ static int device_is_nonrot(struct dm_ta
 	return q && blk_queue_nonrot(q);
 }
 
-static bool dm_table_is_nonrot(struct dm_table *t)
+static int device_is_not_random(struct dm_target *ti, struct dm_dev *dev,
+			     sector_t start, sector_t len, void *data)
+{
+	struct request_queue *q = bdev_get_queue(dev->bdev);
+
+	return q && !blk_queue_add_random(q);
+}
+
+static bool dm_table_all_devices_attribute(struct dm_table *t,
+					   iterate_devices_callout_fn func)
 {
 	struct dm_target *ti;
 	unsigned i = 0;
 
-	/* Ensure that all underlying device are non-rotational. */
 	while (i < dm_table_get_num_targets(t)) {
 		ti = dm_table_get_target(t, i++);
 
 		if (!ti->type->iterate_devices ||
-		    !ti->type->iterate_devices(ti, device_is_nonrot, NULL))
+		    !ti->type->iterate_devices(ti, func, NULL))
 			return 0;
 	}
 
@@ -1393,7 +1401,8 @@ void dm_table_set_restrictions(struct dm
 	if (!dm_table_discard_zeroes_data(t))
 		q->limits.discard_zeroes_data = 0;
 
-	if (dm_table_is_nonrot(t))
+	/* Ensure that all underlying devices are non-rotational. */
+	if (dm_table_all_devices_attribute(t, device_is_nonrot))
 		queue_flag_set_unlocked(QUEUE_FLAG_NONROT, q);
 	else
 		queue_flag_clear_unlocked(QUEUE_FLAG_NONROT, q);
@@ -1401,6 +1410,15 @@ void dm_table_set_restrictions(struct dm
 	dm_table_set_integrity(t);
 
 	/*
+	 * Determine whether or not this queue's I/O timings contribute
+	 * to the entropy pool, Only request-based targets use this.
+	 * Clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not
+	 * have it set.
+	 */
+	if (blk_queue_add_random(q) && dm_table_all_devices_attribute(t, device_is_not_random))
+		queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, q);
+
+	/*
 	 * QUEUE_FLAG_STACKABLE must be set after all queue settings are
 	 * visible to other CPUs because, once the flag is set, incoming bios
 	 * are processed by request-based dm, which refers to the queue

[ 04/52] dm verity: fix overflow check

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 1d55f6bcc0331d744cd5b56c4ee79e3809438161 upstream.

This patch fixes sector_t overflow checking in dm-verity.

Without this patch, the code checks for overflow only if sector_t is
smaller than long long, not if sector_t and long long have the same size.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-verity.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/md/dm-verity.c
+++ b/drivers/md/dm-verity.c
@@ -718,8 +718,8 @@ static int verity_ctr(struct dm_target *
 	v->hash_dev_block_bits = ffs(num) - 1;
 
 	if (sscanf(argv[5], "%llu%c", &num_ll, &dummy) != 1 ||
-	    num_ll << (v->data_dev_block_bits - SECTOR_SHIFT) !=
-	    (sector_t)num_ll << (v->data_dev_block_bits - SECTOR_SHIFT)) {
+	    (sector_t)(num_ll << (v->data_dev_block_bits - SECTOR_SHIFT))
+	    >> (v->data_dev_block_bits - SECTOR_SHIFT) != num_ll) {
 		ti->error = "Invalid data blocks";
 		r = -EINVAL;
 		goto bad;
@@ -733,8 +733,8 @@ static int verity_ctr(struct dm_target *
 	}
 
 	if (sscanf(argv[6], "%llu%c", &num_ll, &dummy) != 1 ||
-	    num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT) !=
-	    (sector_t)num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT)) {
+	    (sector_t)(num_ll << (v->hash_dev_block_bits - SECTOR_SHIFT))
+	    >> (v->hash_dev_block_bits - SECTOR_SHIFT) != num_ll) {
 		ti->error = "Invalid hash start";
 		r = -EINVAL;
 		goto bad;

[ 05/52] usb: gadget: dummy_hcd: fixup error probe path

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>

commit 1b68a4ca2d038addb7314211d122fb6d7002b38b upstream.

If USB2 host controller probes fine but USB3 does not then we don't
remove the USB controller properly and lock up the system while the HUB
code will try to enumerate the USB2 controller and access memory which
is no longer available in case the dummy_hcd was compiled as a module.

This is a problem since 448b6eb1 ("USB: Make sure to fetch the BOS desc
for roothubs.) if used in USB3 mode because dummy does not provide this
descriptor and explodes later.

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/gadget/dummy_hcd.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -2505,10 +2505,8 @@ static int dummy_hcd_probe(struct platfo
 	hs_hcd->has_tt = 1;
 
 	retval = usb_add_hcd(hs_hcd, 0, 0);
-	if (retval != 0) {
-		usb_put_hcd(hs_hcd);
-		return retval;
-	}
+	if (retval)
+		goto put_usb2_hcd;
 
 	if (mod_data.is_super_speed) {
 		ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
@@ -2527,6 +2525,8 @@ static int dummy_hcd_probe(struct platfo
 put_usb3_hcd:
 	usb_put_hcd(ss_hcd);
 dealloc_usb2_hcd:
+	usb_remove_hcd(hs_hcd);
+put_usb2_hcd:
 	usb_put_hcd(hs_hcd);
 	the_controller.hs_hcd = the_controller.ss_hcd = NULL;
 	return retval;

[ 06/52] USB: option: blacklist QMI interface on ZTE MF683

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit 160c9425ac52cb30502be2d9c5e848cec91bb115 upstream.

Interface #5 on ZTE MF683 is a QMI/wwan interface.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/option.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -870,7 +870,8 @@ static const struct usb_device_id option
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0153, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff),
+	  .driver_info = (kernel_ulong_t)&net_intf5_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) },

[ 07/52] USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Antonio Ospite <ospite@studenti.unina.it>

commit 54575b05af36959dfb6a49a3e9ca0c2b456b7126 upstream.

TIAO/DIYGADGET USB Multi-Protocol Adapter (TUMPA) is an FTDI FT2232H
based device which provides an easily accessible JTAG, SPI, I2C, serial
breakout.

http://www.diygadget.com/tiao-usb-multi-protocol-adapter-jtag-spi-i2c-serial.html
http://www.tiaowiki.com/w/TIAO_USB_Multi_Protocol_Adapter_User%27s_Manual

FTDI FT2232H provides two serial channels (A and B), but on the TUMPA
channel A is dedicated to JTAG/SPI while channel B can be used for
UART/RS-232: use the ftdi_jtag_quirk to expose only channel B as
a usb-serial interface to userspace.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    5 +++++
 2 files changed, 7 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -584,6 +584,8 @@ static struct usb_device_id id_table_com
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_TAVIR_STK500_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_TIAO_UMPA_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	/*
 	 * ELV devices:
 	 */
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -517,6 +517,11 @@
  */
 #define FTDI_TAVIR_STK500_PID	0xFA33	/* STK500 AVR programmer */
 
+/*
+ * TIAO product ids (FTDI_VID)
+ * http://www.tiaowiki.com/w/Main_Page
+ */
+#define FTDI_TIAO_UMPA_PID	0x8a98	/* TIAO/DIYGADGET USB Multi-Protocol Adapter */
 
 
 /********************************/

[ 08/52] USB: qcaux: add Pantech vendor class match

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bjørn Mork <bjorn@mork.no>

commit c638eb2872b3af079501e7ee44cbb8a5cce9b4b5 upstream.

The three Pantech devices UML190 (106c:3716), UML290 (106c:3718) and
P4200 (106c:3721) all use the same subclasses to identify vendor
specific functions.  Replace the existing device specific entries
with generic vendor matching, adding support for the P4200.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Cc: Thomas Schäfer <tschaefer@t-online.de>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/serial/qcaux.c |   10 +++-------
 1 file changed, 3 insertions(+), 7 deletions(-)

--- a/drivers/usb/serial/qcaux.c
+++ b/drivers/usb/serial/qcaux.c
@@ -36,8 +36,6 @@
 #define UTSTARCOM_PRODUCT_UM175_V1		0x3712
 #define UTSTARCOM_PRODUCT_UM175_V2		0x3714
 #define UTSTARCOM_PRODUCT_UM175_ALLTEL		0x3715
-#define PANTECH_PRODUCT_UML190_VZW		0x3716
-#define PANTECH_PRODUCT_UML290_VZW		0x3718
 
 /* CMOTECH devices */
 #define CMOTECH_VENDOR_ID			0x16d8
@@ -68,11 +66,9 @@ static struct usb_device_id id_table[] =
 	{ USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) },
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) },  /* NMEA */
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) },  /* WMC */
-	{ USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) },  /* DIAG */
+	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfd, 0xff) },  /* NMEA */
+	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xfe, 0xff) },  /* WMC */
+	{ USB_VENDOR_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, 0xff, 0xff, 0xff) },  /* DIAG */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

[ 09/52] usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86 systems

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vivek Gautam <gautam.vivek@samsung.com>

commit 457a73d346187c2cc5d599072f38676f18f130e0 upstream.

In 71c731a: usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware
when extracting DMI strings (vendor or product_name) to mark them as quirk
we may get NULL pointer in case of non-x86 systems which won't define
CONFIG_DMI. Hence susbsequent strstr() calls crash while driver probing.

So, returning 'false' here in case we get a NULL vendor or product_name.

This is tested with ARM (exynos) system.

This patch should be backported to stable kernels as old as 3.6, that
contain the commit 71c731a296f1b08a3724bd1b514b64f1bda87a23 "usb: host:
xhci: Fix Compliance Mode on SN65LVPE502CP Hardware"

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reported-by: Sebastian Gottschall (DD-WRT) <s.gottschall@dd-wrt.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -470,6 +470,8 @@ static bool compliance_mode_recovery_tim
 
 	dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
 	dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+	if (!dmi_product_name || !dmi_sys_vendor)
+		return false;
 
 	if (!(strstr(dmi_sys_vendor, "Hewlett-Packard")))
 		return false;

[ 10/52] staging: speakup_soft: Fix reading of init string

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit 40fe4f89671fb3c7ded94190fb267402a38b0261 upstream.

softsynth_read() reads a character at a time from the init string;
when it finds the null terminator it sets the initialized flag but
then repeats the last character.

Additionally, if the read() buffer is not big enough for the init
string, the next read() will start reading from the beginning again.
So the caller may never progress to reading anything else.

Replace the simple initialized flag with the current position in
the init string, carried over between calls.  Switch to reading
real data once this reaches the null terminator.

(This assumes that the length of the init string can't change, which
seems to be the case.  Really, the string and position belong together
in a per-file private struct.)

Tested-by: Samuel Thibault <sthibault@debian.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/speakup/speakup_soft.c |   13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

--- a/drivers/staging/speakup/speakup_soft.c
+++ b/drivers/staging/speakup/speakup_soft.c
@@ -40,7 +40,7 @@ static int softsynth_is_alive(struct spk
 static unsigned char get_index(void);
 
 static struct miscdevice synth_device;
-static int initialized;
+static int init_pos;
 static int misc_registered;
 
 static struct var_t vars[] = {
@@ -194,7 +194,7 @@ static int softsynth_close(struct inode
 	unsigned long flags;
 	spk_lock(flags);
 	synth_soft.alive = 0;
-	initialized = 0;
+	init_pos = 0;
 	spk_unlock(flags);
 	/* Make sure we let applications go before leaving */
 	speakup_start_ttys();
@@ -239,13 +239,8 @@ static ssize_t softsynth_read(struct fil
 			ch = '\x18';
 		} else if (synth_buffer_empty()) {
 			break;
-		} else if (!initialized) {
-			if (*init) {
-				ch = *init;
-				init++;
-			} else {
-				initialized = 1;
-			}
+		} else if (init[init_pos]) {
+			ch = init[init_pos++];
 		} else {
 			ch = synth_buffer_getc();
 		}

[ 11/52] tty: keyboard.c: Remove locking from vt_get_leds.

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christopher Brannon <chris@the-brannons.com>

commit 157a4b311c45c9aba75a990464d9680867dc8805 upstream.

There are three call sites for this function, and all three
are called within a keyboard handler.
kbd_event_lock is already held within keyboard handlers,
so attempting to lock it in vt_get_leds causes deadlock.

Signed-off-by: Christopher Brannon <chris@the-brannons.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/vt/keyboard.c |    3 ---
 1 file changed, 3 deletions(-)

--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1053,13 +1053,10 @@ static int kbd_update_leds_helper(struct
  */
 int vt_get_leds(int console, int flag)
 {
-	unsigned long flags;
 	struct kbd_struct * kbd = kbd_table + console;
 	int ret;
 
-	spin_lock_irqsave(&kbd_event_lock, flags);
 	ret = vc_kbd_led(kbd, flag);
-	spin_unlock_irqrestore(&kbd_event_lock, flags);
 
 	return ret;
 }

[ 12/52] staging: r8712u: Do not queue cloned skb

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit fa16e5ea25d7dd83f663f333e70713aa2fa5dffe upstream.

Some post-3.4 kernels have a problem when a cloned skb is used in the
RX path. This patch handles one such case for r8712u.

The patch was suggested by Eric Dumazet.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/rtl8712/rtl8712_recv.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/staging/rtl8712/rtl8712_recv.c
+++ b/drivers/staging/rtl8712/rtl8712_recv.c
@@ -1126,6 +1126,9 @@ static void recv_tasklet(void *priv)
 		recvbuf2recvframe(padapter, pskb);
 		skb_reset_tail_pointer(pskb);
 		pskb->len = 0;
-		skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb);
+		if (!skb_cloned(pskb))
+			skb_queue_tail(&precvpriv->free_recv_skb_queue, pskb);
+		else
+			consume_skb(pskb);
 	}
 }

[ 13/52] staging: comedi: s626: dont dereference insn->data

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit b655c2c4782ed3e2e71d2608154e295a3e860311 upstream.

`s626_enc_insn_config()` is incorrectly dereferencing `insn->data` which
is a pointer to user memory.  It should be dereferencing the separate
`data` parameter that points to a copy of the data in kernel memory.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/s626.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -2370,7 +2370,7 @@ static int s626_enc_insn_config(struct c
 	/*   (data==NULL) ? (Preloadvalue=0) : (Preloadvalue=data[0]); */
 
 	k->SetMode(dev, k, Setup, TRUE);
-	Preload(dev, k, *(insn->data));
+	Preload(dev, k, data[0]);
 	k->PulseIndex(dev, k);
 	SetLatchSource(dev, k, valueSrclatch);
 	k->SetEnable(dev, k, (uint16_t) (enab != 0));

[ 14/52] staging: comedi: jr3_pci: fix iomem dereference

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit e1878957b4676a17cf398f7f5723b365e9a2ca48 upstream.

Correct a direct dereference of I/O memory to use an appropriate I/O
memory access function.  Note that the pointer being dereferenced is not
currently tagged with `__iomem` but I plan to correct that for 3.7.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/jr3_pci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/drivers/jr3_pci.c
+++ b/drivers/staging/comedi/drivers/jr3_pci.c
@@ -905,7 +905,7 @@ static int jr3_pci_attach(struct comedi_
 	}
 
 	/*  Reset DSP card */
-	devpriv->iobase->channel[0].reset = 0;
+	writel(0, &devpriv->iobase->channel[0].reset);
 
 	result = comedi_load_firmware(dev, "jr3pci.idm", jr3_download_firmware);
 	dev_dbg(dev->hw_dev, "Firmare load %d\n", result);

[ 15/52] staging: comedi: dont dereference user memory for INSN_INTTRIG

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit 5d06e3df280bd230e2eadc16372e62818c63e894 upstream.

`parse_insn()` is dereferencing the user-space pointer `insn->data`
directly when handling the `INSN_INTTRIG` comedi instruction.  It
shouldn't be using `insn->data` at all; it should be using the separate
`data` pointer passed to the function.  Fix it.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/comedi_fops.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -843,7 +843,7 @@ static int parse_insn(struct comedi_devi
 				ret = -EAGAIN;
 				break;
 			}
-			ret = s->async->inttrig(dev, s, insn->data[0]);
+			ret = s->async->inttrig(dev, s, data[0]);
 			if (ret >= 0)
 				ret = 1;
 			break;

[ 16/52] staging: comedi: fix memory leak for saved channel list

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit c8cad4c89ee3b15935c532210ae6ebb5c0a2734d upstream.

When `do_cmd_ioctl()` allocates memory for the kernel copy of a channel
list, it frees any previously allocated channel list in
`async->cmd.chanlist` and replaces it with the new one.  However, if the
device is ever removed (or "detached") the cleanup code in
`cleanup_device()` in "drivers.c" does not free this memory so it is
lost.

A sensible place to free the kernel copy of the channel list is in
`do_become_nonbusy()` as at that point the comedi asynchronous command
associated with the channel list is no longer valid.  Free the channel
list in `do_become_nonbusy()` instead of `do_cmd_ioctl()` and clear the
pointer to prevent it being freed more than once.

Note that `cleanup_device()` could be called at an inappropriate time
while the comedi device is open, but that's a separate bug not related
to this this patch.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/comedi_fops.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -1088,7 +1088,6 @@ static int do_cmd_ioctl(struct comedi_de
 		goto cleanup;
 	}
 
-	kfree(async->cmd.chanlist);
 	async->cmd = user_cmd;
 	async->cmd.data = NULL;
 	/* load channel/gain list */
@@ -1833,6 +1832,8 @@ void do_become_nonbusy(struct comedi_dev
 	if (async) {
 		comedi_reset_async_buf(async);
 		async->inttrig = NULL;
+		kfree(async->cmd.chanlist);
+		async->cmd.chanlist = NULL;
 	} else {
 		printk(KERN_ERR
 		       "BUG: (?) do_become_nonbusy called with async=0\n");

[ 17/52] Remove BUG_ON from n_tty_read()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislav Kozina <skozina@redhat.com>

commit e9490e93c1978b6669f3e993caa3189be13ce459 upstream.

Change the BUG_ON to WARN_ON and return in case of tty->read_buf==NULL. We want to track a
couple of long standing reports of this but at the same time we can avoid killing the box.

Signed-off-by: Stanislav Kozina <skozina@redhat.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/n_tty.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -1727,7 +1727,8 @@ static ssize_t n_tty_read(struct tty_str
 
 do_it_again:
 
-	BUG_ON(!tty->read_buf);
+	if (WARN_ON(!tty->read_buf))
+		return -EAGAIN;
 
 	c = job_control(tty, file);
 	if (c < 0)

[ 18/52] TTY: ttyprintk, dont touch behind tty->write_buf

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jiri Slaby <jslaby@suse.cz>

commit ee8b593affdf893012e57f4c54a21984d1b0d92e upstream.

If a user provides a buffer larger than a tty->write_buf chunk and
passes '\r' at the end of the buffer, we touch an out-of-bound memory.

Add a check there to prevent this.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Samo Pogacnik <samo_pogacnik@t-2.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/ttyprintk.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -67,7 +67,7 @@ static int tpk_printk(const unsigned cha
 				tmp[tpk_curr + 1] = '\0';
 				printk(KERN_INFO "%s%s", tpk_tag, tmp);
 				tpk_curr = 0;
-				if (buf[i + 1] == '\n')
+				if ((i + 1) < count && buf[i + 1] == '\n')
 					i++;
 				break;
 			case '\n':

[ 19/52] serial: omap: fix software flow control

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vikram Pandita <vikram.pandita@ti.com>

commit 957ee7270d632245b43f6feb0e70d9a5e9ea6cf6 upstream.

Software flow control register bits were not defined correctly.

Also clarify the IXON and IXOFF logic to reflect what userspace wants.

Tested-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/plat-omap/include/plat/omap-serial.h |    4 ++--
 drivers/tty/serial/omap-serial.c              |   12 ++++++------
 2 files changed, 8 insertions(+), 8 deletions(-)

--- a/arch/arm/plat-omap/include/plat/omap-serial.h
+++ b/arch/arm/plat-omap/include/plat/omap-serial.h
@@ -42,10 +42,10 @@
 #define OMAP_UART_WER_MOD_WKUP	0X7F
 
 /* Enable XON/XOFF flow control on output */
-#define OMAP_UART_SW_TX		0x04
+#define OMAP_UART_SW_TX		0x8
 
 /* Enable XON/XOFF flow control on input */
-#define OMAP_UART_SW_RX		0x04
+#define OMAP_UART_SW_RX		0x2
 
 #define OMAP_UART_SYSC_RESET	0X07
 #define OMAP_UART_TCR_TRIG	0X0F
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -649,19 +649,19 @@ serial_omap_configure_xonxoff
 
 	/*
 	 * IXON Flag:
-	 * Enable XON/XOFF flow control on output.
-	 * Transmit XON1, XOFF1
+	 * Flow control for OMAP.TX
+	 * OMAP.RX should listen for XON/XOFF
 	 */
 	if (termios->c_iflag & IXON)
-		up->efr |= OMAP_UART_SW_TX;
+		up->efr |= OMAP_UART_SW_RX;
 
 	/*
 	 * IXOFF Flag:
-	 * Enable XON/XOFF flow control on input.
-	 * Receiver compares XON1, XOFF1.
+	 * Flow control for OMAP.RX
+	 * OMAP.TX should send XON/XOFF
 	 */
 	if (termios->c_iflag & IXOFF)
-		up->efr |= OMAP_UART_SW_RX;
+		up->efr |= OMAP_UART_SW_TX;
 
 	serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
 	serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);

[ 20/52] serial: pl011: handle corruption at high clock speeds

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Linus Walleij <linus.walleij@linaro.org>

commit c5dd553b9fd069892c9e2de734f4f604e280fa7a upstream.

This works around a few glitches in the ST version of the PL011
serial driver when using very high baud rates, as we do in the
Ux500: 3, 3.25, 4 and 4.05 Mbps.

Problem Observed/rootcause:

When using high baud-rates, and the baudrate*8 is getting close to
the provided clock frequency (so a division factor close to 1), when
using bursts of characters (so they are abutted), then it seems as if
there is not enough time to detect the beginning of the start-bit which
is a timing reference for the entire character, and thus the sampling
moment of character bits is moving towards the end of each bit, instead
of the middle.

Fix:
Increase slightly the RX baud rate of the UART above the theoretical
baudrate by 5%. This will definitely give more margin time to the
UART_RX to correctly sample the data at the middle of the bit period.

Also fix the ages old copy-paste error in the very stressed comment,
it's referencing the registers used in the PL010 driver rather than
the PL011 ones.

Signed-off-by: Guillaume Jaunet <guillaume.jaunet@stericsson.com>
Signed-off-by: Christophe Arnal <christophe.arnal@stericsson.com>
Signed-off-by: Matthias Locher <matthias.locher@stericsson.com>
Signed-off-by: Rajanikanth HV <rajanikanth.hv@stericsson.com>
Cc: Bibek Basu <bibek.basu@stericsson.com>
Cc: Par-Gunnar Hjalmdahl <par-gunnar.hjalmdahl@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/amba-pl011.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1654,13 +1654,26 @@ pl011_set_termios(struct uart_port *port
 			old_cr &= ~ST_UART011_CR_OVSFACT;
 	}
 
+	/*
+	 * Workaround for the ST Micro oversampling variants to
+	 * increase the bitrate slightly, by lowering the divisor,
+	 * to avoid delayed sampling of start bit at high speeds,
+	 * else we see data corruption.
+	 */
+	if (uap->vendor->oversampling) {
+		if ((baud >= 3000000) && (baud < 3250000) && (quot > 1))
+			quot -= 1;
+		else if ((baud > 3250000) && (quot > 2))
+			quot -= 2;
+	}
 	/* Set baud rate */
 	writew(quot & 0x3f, port->membase + UART011_FBRD);
 	writew(quot >> 6, port->membase + UART011_IBRD);
 
 	/*
 	 * ----------v----------v----------v----------v-----
-	 * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
+	 * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER
+	 * UART011_FBRD & UART011_IBRD.
 	 * ----------^----------^----------^----------^-----
 	 */
 	writew(lcr_h, port->membase + uap->lcrh_rx);

[ 21/52] serial: set correct baud_base for EXSYS EX-41092 Dual 16950

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Flavio Leitner <fbl@redhat.com>

commit 26e8220adb0aec43b7acafa0f1431760eee28522 upstream.

Apparently the same card model has two IDs, so this patch
complements the commit 39aced68d664291db3324d0fcf0985ab5626aac2
adding the missing one.

Signed-off-by: Flavio Leitner <fbl@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/serial/8250/8250_pci.c |    9 +++++++--
 include/linux/pci_ids.h            |    1 -
 2 files changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1125,6 +1125,8 @@ pci_xr17c154_setup(struct serial_private
 #define PCI_SUBDEVICE_ID_OCTPRO422	0x0208
 #define PCI_SUBDEVICE_ID_POCTAL232	0x0308
 #define PCI_SUBDEVICE_ID_POCTAL422	0x0408
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_00	0x2500
+#define PCI_SUBDEVICE_ID_SIIG_DUAL_30	0x2530
 #define PCI_VENDOR_ID_ADVANTECH		0x13fe
 #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66
 #define PCI_DEVICE_ID_ADVANTECH_PCI3620	0x3620
@@ -3187,8 +3189,11 @@ static struct pci_device_id serial_pci_t
 		 * For now just used the hex ID 0x950a.
 		 */
 	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
-		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL, 0, 0,
-		pbn_b0_2_115200 },
+		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_00,
+		0, 0, pbn_b0_2_115200 },
+	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
+		PCI_SUBVENDOR_ID_SIIG, PCI_SUBDEVICE_ID_SIIG_DUAL_30,
+		0, 0, pbn_b0_2_115200 },
 	{	PCI_VENDOR_ID_OXSEMI, 0x950a,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0,
 		pbn_b0_2_1130000 },
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1846,7 +1846,6 @@
 #define PCI_DEVICE_ID_SIIG_8S_20x_650	0x2081
 #define PCI_DEVICE_ID_SIIG_8S_20x_850	0x2082
 #define PCI_SUBDEVICE_ID_SIIG_QUARTET_SERIAL	0x2050
-#define PCI_SUBDEVICE_ID_SIIG_DUAL_SERIAL	0x2530
 
 #define PCI_VENDOR_ID_RADISYS		0x1331
 

[ 22/52] tools/hv: Fix file handle leak

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit d5ab482799e7c4c4b7c0aa67e8710dce28115d03 upstream.

Match up each fopen() with an fclose().

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/hv/hv_kvp_daemon.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -144,7 +144,7 @@ static void kvp_update_file(int pool)
 				sizeof(struct kvp_record),
 				kvp_file_info[pool].num_records, filep);
 
-	fflush(filep);
+	fclose(filep);
 	kvp_release_lock(pool);
 }
 
@@ -191,6 +191,7 @@ static void kvp_update_mem_state(int poo
 	kvp_file_info[pool].records = record;
 	kvp_file_info[pool].num_records = records_read;
 
+	fclose(filep);
 	kvp_release_lock(pool);
 }
 static int kvp_file_init(void)

[ 23/52] tools/hv: Fix exit() error code

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit 6bb22fea25624ab593eee376fa5fb82d1b13f45a upstream.

Linux native exit codes are 8-bit unsigned values.  exit(-1) results
in an exit code of 255, which is usually reserved for shells reporting
'command not found'.  Use the portable value EXIT_FAILURE.  (Not that
this matters much for a daemon.)

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/hv/hv_kvp_daemon.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -106,7 +106,7 @@ static void kvp_acquire_lock(int pool)
 
 	if (fcntl(kvp_file_info[pool].fd, F_SETLKW, &fl) == -1) {
 		syslog(LOG_ERR, "Failed to acquire the lock pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 }
 
@@ -118,7 +118,7 @@ static void kvp_release_lock(int pool)
 	if (fcntl(kvp_file_info[pool].fd, F_SETLK, &fl) == -1) {
 		perror("fcntl");
 		syslog(LOG_ERR, "Failed to release the lock pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 }
 
@@ -137,7 +137,7 @@ static void kvp_update_file(int pool)
 	if (!filep) {
 		kvp_release_lock(pool);
 		syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 
 	bytes_written = fwrite(kvp_file_info[pool].records,
@@ -163,7 +163,7 @@ static void kvp_update_mem_state(int poo
 	if (!filep) {
 		kvp_release_lock(pool);
 		syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 	while (!feof(filep)) {
 		readp = &record[records_read];
@@ -180,7 +180,7 @@ static void kvp_update_mem_state(int poo
 
 			if (record == NULL) {
 				syslog(LOG_ERR, "malloc failed");
-				exit(-1);
+				exit(EXIT_FAILURE);
 			}
 			continue;
 		}
@@ -209,7 +209,7 @@ static int kvp_file_init(void)
 	if (access("/var/opt/hyperv", F_OK)) {
 		if (mkdir("/var/opt/hyperv", S_IRUSR | S_IWUSR | S_IROTH)) {
 			syslog(LOG_ERR, " Failed to create /var/opt/hyperv");
-			exit(-1);
+			exit(EXIT_FAILURE);
 		}
 	}
 
@@ -658,13 +658,13 @@ int main(void)
 
 	if (kvp_file_init()) {
 		syslog(LOG_ERR, "Failed to initialize the pools");
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 
 	fd = socket(AF_NETLINK, SOCK_DGRAM, NETLINK_CONNECTOR);
 	if (fd < 0) {
 		syslog(LOG_ERR, "netlink socket creation failed; error:%d", fd);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 	addr.nl_family = AF_NETLINK;
 	addr.nl_pad = 0;
@@ -676,7 +676,7 @@ int main(void)
 	if (error < 0) {
 		syslog(LOG_ERR, "bind failed; error:%d", error);
 		close(fd);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 	sock_opt = addr.nl_groups;
 	setsockopt(fd, 270, 1, &sock_opt, sizeof(sock_opt));
@@ -696,7 +696,7 @@ int main(void)
 	if (len < 0) {
 		syslog(LOG_ERR, "netlink_send failed; error:%d", len);
 		close(fd);
-		exit(-1);
+		exit(EXIT_FAILURE);
 	}
 
 	pfd.fd = fd;
@@ -864,7 +864,7 @@ kvp_done:
 		len = netlink_send(fd, incoming_cn_msg);
 		if (len < 0) {
 			syslog(LOG_ERR, "net_link send failed; error:%d", len);
-			exit(-1);
+			exit(EXIT_FAILURE);
 		}
 	}
 

[ 24/52] tools/hv: Check for read/write errors

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ben Hutchings <ben@decadent.org.uk>

commit 436473bc2173499ae274d0f50111d1e355006caf upstream.

hv_kvp_daemon currently does not check whether fread() or fwrite()
succeed.  Add the necessary checks.  Also, remove the incorrect use of
feof() before fread().

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/hv/hv_kvp_daemon.c |   22 +++++++++++++++++++---
 1 file changed, 19 insertions(+), 3 deletions(-)

--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -144,7 +144,12 @@ static void kvp_update_file(int pool)
 				sizeof(struct kvp_record),
 				kvp_file_info[pool].num_records, filep);
 
-	fclose(filep);
+	if (ferror(filep) || fclose(filep)) {
+		kvp_release_lock(pool);
+		syslog(LOG_ERR, "Failed to write file, pool: %d", pool);
+		exit(EXIT_FAILURE);
+	}
+
 	kvp_release_lock(pool);
 }
 
@@ -165,12 +170,17 @@ static void kvp_update_mem_state(int poo
 		syslog(LOG_ERR, "Failed to open file, pool: %d", pool);
 		exit(EXIT_FAILURE);
 	}
-	while (!feof(filep)) {
+	for (;;) {
 		readp = &record[records_read];
 		records_read += fread(readp, sizeof(struct kvp_record),
 					ENTRIES_PER_BLOCK * num_blocks,
 					filep);
 
+		if (ferror(filep)) {
+			syslog(LOG_ERR, "Failed to read file, pool: %d", pool);
+			exit(EXIT_FAILURE);
+		}
+
 		if (!feof(filep)) {
 			/*
 			 * We have more data to read.
@@ -233,12 +243,18 @@ static int kvp_file_init(void)
 			fclose(filep);
 			return 1;
 		}
-		while (!feof(filep)) {
+		for (;;) {
 			readp = &record[records_read];
 			records_read += fread(readp, sizeof(struct kvp_record),
 					ENTRIES_PER_BLOCK,
 					filep);
 
+			if (ferror(filep)) {
+				syslog(LOG_ERR, "Failed to read file, pool: %d",
+				       i);
+				exit(EXIT_FAILURE);
+			}
+
 			if (!feof(filep)) {
 				/*
 				 * We have more data to read.

[ 25/52] b43legacy: Fix crash on unload when firmware not available

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Larry Finger <Larry.Finger@lwfinger.net>

commit 2d838bb608e2d1f6cb4280e76748cb812dc822e7 upstream.

When b43legacy is loaded without the firmware being available, a following
unload generates a kernel NULL pointer dereference BUG as follows:

[  214.330789] BUG: unable to handle kernel NULL pointer dereference at 0000004c
[  214.330997] IP: [<c104c395>] drain_workqueue+0x15/0x170
[  214.331179] *pde = 00000000
[  214.331311] Oops: 0000 [#1] SMP
[  214.331471] Modules linked in: b43legacy(-) ssb pcmcia mac80211 cfg80211 af_packet mperf arc4 ppdev sr_mod cdrom sg shpchp yenta_socket pcmcia_rsrc pci_hotplug pcmcia_core battery parport_pc parport floppy container ac button edd autofs4 ohci_hcd ehci_hcd usbcore usb_common thermal processor scsi_dh_rdac scsi_dh_hp_sw scsi_dh_emc scsi_dh_alua scsi_dh fan thermal_sys hwmon ata_generic pata_ali libata [last unloaded: cfg80211]
[  214.333421] Pid: 3639, comm: modprobe Not tainted 3.6.0-rc6-wl+ #163 Source Technology VIC 9921/ALI Based Notebook
[  214.333580] EIP: 0060:[<c104c395>] EFLAGS: 00010246 CPU: 0
[  214.333687] EIP is at drain_workqueue+0x15/0x170
[  214.333788] EAX: c162ac40 EBX: cdfb8360 ECX: 0000002a EDX: 00002a2a
[  214.333890] ESI: 00000000 EDI: 00000000 EBP: cd767e7c ESP: cd767e5c
[  214.333957]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  214.333957] CR0: 8005003b CR2: 0000004c CR3: 0c96a000 CR4: 00000090
[  214.333957] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[  214.333957] DR6: ffff0ff0 DR7: 00000400
[  214.333957] Process modprobe (pid: 3639, ti=cd766000 task=cf802e90 task.ti=cd766000)
[  214.333957] Stack:
[  214.333957]  00000292 cd767e74 c12c5e09 00000296 00000296 cdfb8360 cdfb9220 00000000
[  214.333957]  cd767e90 c104c4fd cdfb8360 cdfb9220 cd682800 cd767ea4 d0c10184 cd682800
[  214.333957]  cd767ea4 cba31064 cd767eb8 d0867908 cba31064 d087e09c cd96f034 cd767ec4
[  214.333957] Call Trace:
[  214.333957]  [<c12c5e09>] ? skb_dequeue+0x49/0x60
[  214.333957]  [<c104c4fd>] destroy_workqueue+0xd/0x150
[  214.333957]  [<d0c10184>] ieee80211_unregister_hw+0xc4/0x100 [mac80211]
[  214.333957]  [<d0867908>] b43legacy_remove+0x78/0x80 [b43legacy]
[  214.333957]  [<d083654d>] ssb_device_remove+0x1d/0x30 [ssb]
[  214.333957]  [<c126f15a>] __device_release_driver+0x5a/0xb0
[  214.333957]  [<c126fb07>] driver_detach+0x87/0x90
[  214.333957]  [<c126ef4c>] bus_remove_driver+0x6c/0xe0
[  214.333957]  [<c1270120>] driver_unregister+0x40/0x70
[  214.333957]  [<d083686b>] ssb_driver_unregister+0xb/0x10 [ssb]
[  214.333957]  [<d087c488>] b43legacy_exit+0xd/0xf [b43legacy]
[  214.333957]  [<c1089dde>] sys_delete_module+0x14e/0x2b0
[  214.333957]  [<c110a4a7>] ? vfs_write+0xf7/0x150
[  214.333957]  [<c1240050>] ? tty_write_lock+0x50/0x50
[  214.333957]  [<c110a6f8>] ? sys_write+0x38/0x70
[  214.333957]  [<c1397c55>] syscall_call+0x7/0xb
[  214.333957] Code: bc 27 00 00 00 00 a1 74 61 56 c1 55 89 e5 e8 a3 fc ff ff 5d c3 90 55 89 e5 57 56 89 c6 53 b8 40 ac 62 c1 83 ec 14 e8 bb b7 34 00 <8b> 46 4c 8d 50 01 85 c0 89 56 4c 75 03 83 0e 40 80 05 40 ac 62
[  214.333957] EIP: [<c104c395>] drain_workqueue+0x15/0x170 SS:ESP 0068:cd767e5c
[  214.333957] CR2: 000000000000004c
[  214.341110] ---[ end trace c7e90ec026d875a6 ]---Index: wireless-testing/drivers/net/wireless/b43legacy/main.c

The problem is fixed by making certain that the ucode pointer is not NULL
before deregistering the driver in mac80211.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/b43legacy/main.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3892,6 +3892,8 @@ static void b43legacy_remove(struct ssb_
 	cancel_work_sync(&wl->firmware_load);
 
 	B43legacy_WARN_ON(!wl);
+	if (!wldev->fw.ucode)
+		return;			/* NULL if fw never loaded */
 	if (wl->current_dev == wldev)
 		ieee80211_unregister_hw(wl->hw);
 

[ 26/52] firmware: Add missing attributes to EFI variable attribute print out from sysfs

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Khalid Aziz <khalid.aziz@hp.com>

commit 7083909023bbe29b3176e92d2d089def1aa7aa1e upstream.

Some of the EFI variable attributes are missing from print out from
/sys/firmware/efi/vars/*/attributes. This patch adds those in. It also
updates code to use pre-defined constants for masking current value
of attributes.

Signed-off-by: Khalid Aziz <khalid.aziz@hp.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firmware/efivars.c |   17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/drivers/firmware/efivars.c
+++ b/drivers/firmware/efivars.c
@@ -435,12 +435,23 @@ efivar_attr_read(struct efivar_entry *en
 	if (status != EFI_SUCCESS)
 		return -EIO;
 
-	if (var->Attributes & 0x1)
+	if (var->Attributes & EFI_VARIABLE_NON_VOLATILE)
 		str += sprintf(str, "EFI_VARIABLE_NON_VOLATILE\n");
-	if (var->Attributes & 0x2)
+	if (var->Attributes & EFI_VARIABLE_BOOTSERVICE_ACCESS)
 		str += sprintf(str, "EFI_VARIABLE_BOOTSERVICE_ACCESS\n");
-	if (var->Attributes & 0x4)
+	if (var->Attributes & EFI_VARIABLE_RUNTIME_ACCESS)
 		str += sprintf(str, "EFI_VARIABLE_RUNTIME_ACCESS\n");
+	if (var->Attributes & EFI_VARIABLE_HARDWARE_ERROR_RECORD)
+		str += sprintf(str, "EFI_VARIABLE_HARDWARE_ERROR_RECORD\n");
+	if (var->Attributes & EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS)
+		str += sprintf(str,
+			"EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS\n");
+	if (var->Attributes &
+			EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS)
+		str += sprintf(str,
+			"EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS\n");
+	if (var->Attributes & EFI_VARIABLE_APPEND_WRITE)
+		str += sprintf(str, "EFI_VARIABLE_APPEND_WRITE\n");
 	return str - buf;
 }
 

[ 27/52] xhci: Intel Panther Point BEI quirk.

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sarah Sharp <sarah.a.sharp@linux.intel.com>

commit 80fab3b244a22e0ca539d2439bdda50e81e5666f upstream.

When a device with an isochronous endpoint is behind a hub plugged into
the Intel Panther Point xHCI host controller, and the driver submits
multiple frames per URB, the xHCI driver will set the Block Event
Interrupt (BEI) flag on all but the last TD for the URB.  This causes
the host controller to place an event on the event ring, but not send an
interrupt.  When the last TD for the URB completes, BEI is cleared, and
we get an interrupt for the whole URB.

However, under a Panther Point xHCI host controller, if the parent hub
is unplugged when one or more events from transfers with BEI set are on
the event ring, a port status change event is placed on the event ring,
but no interrupt is generated.  This means URBs stop completing, and the
USB device disconnect is not noticed.  Something like a USB headset will
cause mplayer to hang when the device is disconnected.

If another transfer is sent (such as running `sudo lsusb -v`), the next
transfer event seems to "unstick" the event ring, the xHCI driver gets
an interrupt, and the disconnect is reported to the USB core.

The fix is not to use the BEI flag under the Panther Point xHCI host.
This will impact power consumption and system responsiveness, because
the xHCI driver will receive an interrupt for every frame in all
isochronous URBs instead of once per URB.

Intel chipset developers confirm that this bug will be hit if the BEI
flag is used on any endpoint, not just ones that are behind a hub.

This patch should be backported to kernels as old as 3.0, that contain
the commit 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support
EHCI/xHCI port switching."

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-pci.c  |    1 +
 drivers/usb/host/xhci-ring.c |    4 +++-
 drivers/usb/host/xhci.h      |    1 +
 3 files changed, 5 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -99,6 +99,7 @@ static void xhci_pci_quirks(struct devic
 		 * PPT chipsets.
 		 */
 		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
+		xhci->quirks |= XHCI_AVOID_BEI;
 	}
 	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -3400,7 +3400,9 @@ static int xhci_queue_isoc_tx(struct xhc
 			} else {
 				td->last_trb = ep_ring->enqueue;
 				field |= TRB_IOC;
-				if (xhci->hci_version == 0x100) {
+				if (xhci->hci_version == 0x100 &&
+						!(xhci->quirks &
+							XHCI_AVOID_BEI)) {
 					/* Set BEI bit except for the last td */
 					if (i < num_tds - 1)
 						field |= TRB_BEI;
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1488,6 +1488,7 @@ struct xhci_hcd {
 #define XHCI_TRUST_TX_LENGTH	(1 << 10)
 #define XHCI_SPURIOUS_REBOOT	(1 << 13)
 #define XHCI_COMP_MODE_QUIRK	(1 << 14)
+#define XHCI_AVOID_BEI		(1 << 15)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */

[ 28/52] xHCI: add cmd_ring_state

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Elric Fu <elricfu1@gmail.com>

commit c181bc5b5d5c79b71203cd10cef97f802fb6f9c1 upstream.

Adding cmd_ring_state for command ring. It helps to verify
the current command ring state for controlling the command
ring operations.

This patch should be backported to kernels as old as 3.0.  The commit
7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to
check for virt_dev=0 bug." papers over the NULL pointer dereference that
I now believe is related to a timed out Set Address command.  This (and
the four patches that follow it) contain the real fix that also allows
VIA USB 3.0 hubs to consistently re-enumerate during the plug/unplug
stress tests.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-ring.c |    3 +++
 drivers/usb/host/xhci.c      |    6 ++++--
 drivers/usb/host/xhci.h      |    4 ++++
 3 files changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -280,6 +280,9 @@ static inline int room_on_ring(struct xh
 /* Ring the host controller doorbell after placing a command on the ring */
 void xhci_ring_cmd_db(struct xhci_hcd *xhci)
 {
+	if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
+		return;
+
 	xhci_dbg(xhci, "// Ding dong!\n");
 	xhci_writel(xhci, DB_VALUE_HOST, &xhci->dba->doorbell[0]);
 	/* Flush PCI posted writes */
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -105,9 +105,10 @@ int xhci_halt(struct xhci_hcd *xhci)
 
 	ret = handshake(xhci, &xhci->op_regs->status,
 			STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC);
-	if (!ret)
+	if (!ret) {
 		xhci->xhc_state |= XHCI_STATE_HALTED;
-	else
+		xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+	} else
 		xhci_warn(xhci, "Host not halted after %u microseconds.\n",
 				XHCI_MAX_HALT_USEC);
 	return ret;
@@ -583,6 +584,7 @@ static int xhci_run_finished(struct xhci
 		return -ENODEV;
 	}
 	xhci->shared_hcd->state = HC_STATE_RUNNING;
+	xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
 
 	if (xhci->quirks & XHCI_NEC_HOST)
 		xhci_ring_cmd_db(xhci);
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1417,6 +1417,10 @@ struct xhci_hcd {
 	/* data structures */
 	struct xhci_device_context_array *dcbaa;
 	struct xhci_ring	*cmd_ring;
+	unsigned int            cmd_ring_state;
+#define CMD_RING_STATE_RUNNING         (1 << 0)
+#define CMD_RING_STATE_ABORTED         (1 << 1)
+#define CMD_RING_STATE_STOPPED         (1 << 2)
 	unsigned int		cmd_ring_reserved_trbs;
 	struct xhci_ring	*event_ring;
 	struct xhci_erst	erst;

Re: [ 28/52] xHCI: add cmd_ring_state

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 1068 bytes --]

On Thu, 2012-10-04 at 14:21 -0700, Greg Kroah-Hartman wrote:
> 3.4-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Elric Fu <elricfu1@gmail.com>
> 
> commit c181bc5b5d5c79b71203cd10cef97f802fb6f9c1 upstream.
> 
> Adding cmd_ring_state for command ring. It helps to verify
> the current command ring state for controlling the command
> ring operations.
> 
> This patch should be backported to kernels as old as 3.0.  The commit

I assume this still needs backporting for 3.0, since it wasn't included
in 3.0.45-rc1.

Ben.

> 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an assertion to
> check for virt_dev=0 bug." papers over the NULL pointer dereference that
> I now believe is related to a timed out Set Address command.  This (and
> the four patches that follow it) contain the real fix that also allows
> VIA USB 3.0 hubs to consistently re-enumerate during the plug/unplug
> stress tests.
[...]

-- 
Ben Hutchings
You can't have everything.  Where would you put it?

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 28/52] xHCI: add cmd_ring_state

[Greg Kroah-Hartman]

On Sun, Oct 07, 2012 at 01:54:52AM +0100, Ben Hutchings wrote:
> On Thu, 2012-10-04 at 14:21 -0700, Greg Kroah-Hartman wrote:
> > 3.4-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Elric Fu <elricfu1@gmail.com>
> > 
> > commit c181bc5b5d5c79b71203cd10cef97f802fb6f9c1 upstream.
> > 
> > Adding cmd_ring_state for command ring. It helps to verify
> > the current command ring state for controlling the command
> > ring operations.
> > 
> > This patch should be backported to kernels as old as 3.0.  The commit
> 
> I assume this still needs backporting for 3.0, since it wasn't included
> in 3.0.45-rc1.

Yes, there were also other xhci patches that failed to either apply, or
build, on 3.0 that were requested to be backported to there.

greg k-h

[ 29/52] xHCI: add aborting command ring function

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Elric Fu <elricfu1@gmail.com>

commit b92cc66c047ff7cf587b318fe377061a353c120f upstream.

Software have to abort command ring and cancel command
when a command is failed or hang. Otherwise, the command
ring will hang up and can't handle the others. An example
of a command that may hang is the Address Device Command,
because waiting for a SET_ADDRESS request to be acknowledged
by a USB device is outside of the xHC's ability to control.

To cancel a command, software will initialize a command
descriptor for the cancel command, and add it into a
cancel_cmd_list of xhci.

Sarah: Fixed missing newline on "Have the command ring been stopped?"
debugging statement.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-mem.c  |    7 ++
 drivers/usb/host/xhci-ring.c |  108 +++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.c      |    2 
 drivers/usb/host/xhci.h      |   12 ++++
 4 files changed, 128 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1772,6 +1772,7 @@ void xhci_mem_cleanup(struct xhci_hcd *x
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
 	struct dev_info	*dev_info, *next;
+	struct xhci_cd  *cur_cd, *next_cd;
 	unsigned long	flags;
 	int size;
 	int i, j, num_ports;
@@ -1793,6 +1794,11 @@ void xhci_mem_cleanup(struct xhci_hcd *x
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
 	xhci_dbg(xhci, "Freed command ring\n");
+	list_for_each_entry_safe(cur_cd, next_cd,
+			&xhci->cancel_cmd_list, cancel_cmd_list) {
+		list_del(&cur_cd->cancel_cmd_list);
+		kfree(cur_cd);
+	}
 
 	for (i = 1; i < MAX_HC_SLOTS; ++i)
 		xhci_free_virt_device(xhci, i);
@@ -2338,6 +2344,7 @@ int xhci_mem_init(struct xhci_hcd *xhci,
 	xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
 	if (!xhci->cmd_ring)
 		goto fail;
+	INIT_LIST_HEAD(&xhci->cancel_cmd_list);
 	xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
 	xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
 			(unsigned long long)xhci->cmd_ring->first_seg->dma);
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -289,6 +289,114 @@ void xhci_ring_cmd_db(struct xhci_hcd *x
 	xhci_readl(xhci, &xhci->dba->doorbell[0]);
 }
 
+static int xhci_abort_cmd_ring(struct xhci_hcd *xhci)
+{
+	u64 temp_64;
+	int ret;
+
+	xhci_dbg(xhci, "Abort command ring\n");
+
+	if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING)) {
+		xhci_dbg(xhci, "The command ring isn't running, "
+				"Have the command ring been stopped?\n");
+		return 0;
+	}
+
+	temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	if (!(temp_64 & CMD_RING_RUNNING)) {
+		xhci_dbg(xhci, "Command ring had been stopped\n");
+		return 0;
+	}
+	xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
+	xhci_write_64(xhci, temp_64 | CMD_RING_ABORT,
+			&xhci->op_regs->cmd_ring);
+
+	/* Section 4.6.1.2 of xHCI 1.0 spec says software should
+	 * time the completion od all xHCI commands, including
+	 * the Command Abort operation. If software doesn't see
+	 * CRR negated in a timely manner (e.g. longer than 5
+	 * seconds), then it should assume that the there are
+	 * larger problems with the xHC and assert HCRST.
+	 */
+	ret = handshake(xhci, &xhci->op_regs->cmd_ring,
+			CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
+	if (ret < 0) {
+		xhci_err(xhci, "Stopped the command ring failed, "
+				"maybe the host is dead\n");
+		xhci->xhc_state |= XHCI_STATE_DYING;
+		xhci_quiesce(xhci);
+		xhci_halt(xhci);
+		return -ESHUTDOWN;
+	}
+
+	return 0;
+}
+
+static int xhci_queue_cd(struct xhci_hcd *xhci,
+		struct xhci_command *command,
+		union xhci_trb *cmd_trb)
+{
+	struct xhci_cd *cd;
+	cd = kzalloc(sizeof(struct xhci_cd), GFP_ATOMIC);
+	if (!cd)
+		return -ENOMEM;
+	INIT_LIST_HEAD(&cd->cancel_cmd_list);
+
+	cd->command = command;
+	cd->cmd_trb = cmd_trb;
+	list_add_tail(&cd->cancel_cmd_list, &xhci->cancel_cmd_list);
+
+	return 0;
+}
+
+/*
+ * Cancel the command which has issue.
+ *
+ * Some commands may hang due to waiting for acknowledgement from
+ * usb device. It is outside of the xHC's ability to control and
+ * will cause the command ring is blocked. When it occurs software
+ * should intervene to recover the command ring.
+ * See Section 4.6.1.1 and 4.6.1.2
+ */
+int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
+		union xhci_trb *cmd_trb)
+{
+	int retval = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&xhci->lock, flags);
+
+	if (xhci->xhc_state & XHCI_STATE_DYING) {
+		xhci_warn(xhci, "Abort the command ring,"
+				" but the xHCI is dead.\n");
+		retval = -ESHUTDOWN;
+		goto fail;
+	}
+
+	/* queue the cmd desriptor to cancel_cmd_list */
+	retval = xhci_queue_cd(xhci, command, cmd_trb);
+	if (retval) {
+		xhci_warn(xhci, "Queuing command descriptor failed.\n");
+		goto fail;
+	}
+
+	/* abort command ring */
+	retval = xhci_abort_cmd_ring(xhci);
+	if (retval) {
+		xhci_err(xhci, "Abort command ring failed\n");
+		if (unlikely(retval == -ESHUTDOWN)) {
+			spin_unlock_irqrestore(&xhci->lock, flags);
+			usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
+			xhci_dbg(xhci, "xHCI host controller is dead.\n");
+			return retval;
+		}
+	}
+
+fail:
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	return retval;
+}
+
 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
 		unsigned int slot_id,
 		unsigned int ep_index,
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clea
  * handshake done).  There are two failure modes:  "usec" have passed (major
  * hardware flakeout), or the register reads as all-ones (hardware removed).
  */
-static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
 		      u32 mask, u32 done, int usec)
 {
 	u32	result;
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1252,6 +1252,13 @@ struct xhci_td {
 	union xhci_trb		*last_trb;
 };
 
+/* command descriptor */
+struct xhci_cd {
+	struct list_head	cancel_cmd_list;
+	struct xhci_command	*command;
+	union xhci_trb		*cmd_trb;
+};
+
 struct xhci_dequeue_state {
 	struct xhci_segment *new_deq_seg;
 	union xhci_trb *new_deq_ptr;
@@ -1421,6 +1428,7 @@ struct xhci_hcd {
 #define CMD_RING_STATE_RUNNING         (1 << 0)
 #define CMD_RING_STATE_ABORTED         (1 << 1)
 #define CMD_RING_STATE_STOPPED         (1 << 2)
+	struct list_head        cancel_cmd_list;
 	unsigned int		cmd_ring_reserved_trbs;
 	struct xhci_ring	*event_ring;
 	struct xhci_erst	erst;
@@ -1699,6 +1707,8 @@ static inline void xhci_unregister_plat(
 
 /* xHCI host controller glue */
 typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
+int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
+		u32 mask, u32 done, int usec);
 void xhci_quiesce(struct xhci_hcd *xhci);
 int xhci_halt(struct xhci_hcd *xhci);
 int xhci_reset(struct xhci_hcd *xhci);
@@ -1789,6 +1799,8 @@ void xhci_queue_config_ep_quirk(struct x
 		unsigned int slot_id, unsigned int ep_index,
 		struct xhci_dequeue_state *deq_state);
 void xhci_stop_endpoint_command_watchdog(unsigned long arg);
+int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
+		union xhci_trb *cmd_trb);
 void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
 		unsigned int ep_index, unsigned int stream_id);
 

Re: [ 29/52] xHCI: add aborting command ring function

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 762 bytes --]

On Thu, 2012-10-04 at 14:21 -0700, Greg Kroah-Hartman wrote:
[...]
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clea
>   * handshake done).  There are two failure modes:  "usec" have passed (major
>   * hardware flakeout), or the register reads as all-ones (hardware removed).
>   */
> -static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
> +int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
>  		      u32 mask, u32 done, int usec)
>  {
>  	u32	result;
[...]

I don't think it matters for stable, but since this function is now
extern it should have an 'xhci_' prefix.

Ben.

-- 
Ben Hutchings
You can't have everything.  Where would you put it?

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 29/52] xHCI: add aborting command ring function

[Sarah Sharp]

On Sun, Oct 07, 2012 at 02:02:08AM +0100, Ben Hutchings wrote:
> On Thu, 2012-10-04 at 14:21 -0700, Greg Kroah-Hartman wrote:
> [...]
> > --- a/drivers/usb/host/xhci.c
> > +++ b/drivers/usb/host/xhci.c
> > @@ -52,7 +52,7 @@ MODULE_PARM_DESC(link_quirk, "Don't clea
> >   * handshake done).  There are two failure modes:  "usec" have passed (major
> >   * hardware flakeout), or the register reads as all-ones (hardware removed).
> >   */
> > -static int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
> > +int handshake(struct xhci_hcd *xhci, void __iomem *ptr,
> >  		      u32 mask, u32 done, int usec)
> >  {
> >  	u32	result;
> [...]
> 
> I don't think it matters for stable, but since this function is now
> extern it should have an 'xhci_' prefix.

Is it a non-issue?  I know several other drivers have a handshake
function, including the EHCI driver.  If both xHCI and EHCI is built-in,
will the EHCI driver compile?  I'll have to double check this...

Thanks for catching this!

Sarah Sharp

[ 30/52] xHCI: cancel command after command timeout

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Elric Fu <elricfu1@gmail.com>

commit 6e4468b9a0793dfb53eb80d9fe52c739b13b27fd upstream.

The patch is used to cancel command when the command isn't
acknowledged and a timeout occurs.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.c |   26 +++++++++++++++++++-------
 drivers/usb/host/xhci.h |    3 +++
 2 files changed, 22 insertions(+), 7 deletions(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -2525,6 +2525,7 @@ static int xhci_configure_endpoint(struc
 	struct completion *cmd_completion;
 	u32 *cmd_status;
 	struct xhci_virt_device *virt_dev;
+	union xhci_trb *cmd_trb;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	virt_dev = xhci->devs[udev->slot_id];
@@ -2570,6 +2571,7 @@ static int xhci_configure_endpoint(struc
 	}
 	init_completion(cmd_completion);
 
+	cmd_trb = xhci->cmd_ring->dequeue;
 	if (!ctx_change)
 		ret = xhci_queue_configure_endpoint(xhci, in_ctx->dma,
 				udev->slot_id, must_succeed);
@@ -2591,14 +2593,17 @@ static int xhci_configure_endpoint(struc
 	/* Wait for the configure endpoint command to complete */
 	timeleft = wait_for_completion_interruptible_timeout(
 			cmd_completion,
-			USB_CTRL_SET_TIMEOUT);
+			XHCI_CMD_DEFAULT_TIMEOUT);
 	if (timeleft <= 0) {
 		xhci_warn(xhci, "%s while waiting for %s command\n",
 				timeleft == 0 ? "Timeout" : "Signal",
 				ctx_change == 0 ?
 					"configure endpoint" :
 					"evaluate context");
-		/* FIXME cancel the configure endpoint command */
+		/* cancel the configure endpoint command */
+		ret = xhci_cancel_cmd(xhci, command, cmd_trb);
+		if (ret < 0)
+			return ret;
 		return -ETIME;
 	}
 
@@ -3547,8 +3552,10 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
 	unsigned long flags;
 	int timeleft;
 	int ret;
+	union xhci_trb *cmd_trb;
 
 	spin_lock_irqsave(&xhci->lock, flags);
+	cmd_trb = xhci->cmd_ring->dequeue;
 	ret = xhci_queue_slot_control(xhci, TRB_ENABLE_SLOT, 0);
 	if (ret) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
@@ -3560,12 +3567,12 @@ int xhci_alloc_dev(struct usb_hcd *hcd,
 
 	/* XXX: how much time for xHC slot assignment? */
 	timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
-			USB_CTRL_SET_TIMEOUT);
+			XHCI_CMD_DEFAULT_TIMEOUT);
 	if (timeleft <= 0) {
 		xhci_warn(xhci, "%s while waiting for a slot\n",
 				timeleft == 0 ? "Timeout" : "Signal");
-		/* FIXME cancel the enable slot request */
-		return 0;
+		/* cancel the enable slot request */
+		return xhci_cancel_cmd(xhci, NULL, cmd_trb);
 	}
 
 	if (!xhci->slot_id) {
@@ -3626,6 +3633,7 @@ int xhci_address_device(struct usb_hcd *
 	struct xhci_slot_ctx *slot_ctx;
 	struct xhci_input_control_ctx *ctrl_ctx;
 	u64 temp_64;
+	union xhci_trb *cmd_trb;
 
 	if (!udev->slot_id) {
 		xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
@@ -3664,6 +3672,7 @@ int xhci_address_device(struct usb_hcd *
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
 	spin_lock_irqsave(&xhci->lock, flags);
+	cmd_trb = xhci->cmd_ring->dequeue;
 	ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
 					udev->slot_id);
 	if (ret) {
@@ -3676,7 +3685,7 @@ int xhci_address_device(struct usb_hcd *
 
 	/* ctrl tx can take up to 5 sec; XXX: need more time for xHC? */
 	timeleft = wait_for_completion_interruptible_timeout(&xhci->addr_dev,
-			USB_CTRL_SET_TIMEOUT);
+			XHCI_CMD_DEFAULT_TIMEOUT);
 	/* FIXME: From section 4.3.4: "Software shall be responsible for timing
 	 * the SetAddress() "recovery interval" required by USB and aborting the
 	 * command on a timeout.
@@ -3684,7 +3693,10 @@ int xhci_address_device(struct usb_hcd *
 	if (timeleft <= 0) {
 		xhci_warn(xhci, "%s while waiting for address device command\n",
 				timeleft == 0 ? "Timeout" : "Signal");
-		/* FIXME cancel the address device command */
+		/* cancel the address device command */
+		ret = xhci_cancel_cmd(xhci, NULL, cmd_trb);
+		if (ret < 0)
+			return ret;
 		return -ETIME;
 	}
 
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1252,6 +1252,9 @@ struct xhci_td {
 	union xhci_trb		*last_trb;
 };
 
+/* xHCI command default timeout value */
+#define XHCI_CMD_DEFAULT_TIMEOUT	(5 * HZ)
+
 /* command descriptor */
 struct xhci_cd {
 	struct list_head	cancel_cmd_list;

[ 31/52] xHCI: handle command after aborting the command ring

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Elric Fu <elricfu1@gmail.com>

commit b63f4053cc8aa22a98e3f9a97845afe6c15d0a0d upstream.

According to xHCI spec section 4.6.1.1 and section 4.6.1.2,
after aborting a command on the command ring, xHC will
generate a command completion event with its completion
code set to Command Ring Stopped at least. If a command is
currently executing at the time of aborting a command, xHC
also generate a command completion event with its completion
code set to Command Abort. When the command ring is stopped,
software may remove, add, or rearrage Command Descriptors.

To cancel a command, software will initialize a command
descriptor for the cancel command, and add it into a
cancel_cmd_list of xhci. When the command ring is stopped,
software will find the command trbs described by command
descriptors in cancel_cmd_list and modify it to No Op
command. If software can't find the matched trbs, we can
think it had been finished.

This patch should be backported to kernels as old as 3.0, that contain
the commit 7ed603ecf8b68ab81f4c83097d3063d43ec73bb8 "xhci: Add an
assertion to check for virt_dev=0 bug." That commit papers over a NULL
pointer dereference, and this patch fixes the underlying issue that
caused the NULL pointer dereference.

Signed-off-by: Elric Fu <elricfu1@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Miroslav Sabljic <miroslav.sabljic@avl.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci-ring.c |  171 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 165 insertions(+), 6 deletions(-)

--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1170,6 +1170,20 @@ static void handle_reset_ep_completion(s
 	}
 }
 
+/* Complete the command and detele it from the devcie's command queue.
+ */
+static void xhci_complete_cmd_in_cmd_wait_list(struct xhci_hcd *xhci,
+		struct xhci_command *command, u32 status)
+{
+	command->status = status;
+	list_del(&command->cmd_list);
+	if (command->completion)
+		complete(command->completion);
+	else
+		xhci_free_command(xhci, command);
+}
+
+
 /* Check to see if a command in the device's command queue matches this one.
  * Signal the completion or free the command, and return 1.  Return 0 if the
  * completed command isn't at the head of the command list.
@@ -1188,15 +1202,144 @@ static int handle_cmd_in_cmd_wait_list(s
 	if (xhci->cmd_ring->dequeue != command->command_trb)
 		return 0;
 
-	command->status = GET_COMP_CODE(le32_to_cpu(event->status));
-	list_del(&command->cmd_list);
-	if (command->completion)
-		complete(command->completion);
-	else
-		xhci_free_command(xhci, command);
+	xhci_complete_cmd_in_cmd_wait_list(xhci, command,
+			GET_COMP_CODE(le32_to_cpu(event->status)));
 	return 1;
 }
 
+/*
+ * Finding the command trb need to be cancelled and modifying it to
+ * NO OP command. And if the command is in device's command wait
+ * list, finishing and freeing it.
+ *
+ * If we can't find the command trb, we think it had already been
+ * executed.
+ */
+static void xhci_cmd_to_noop(struct xhci_hcd *xhci, struct xhci_cd *cur_cd)
+{
+	struct xhci_segment *cur_seg;
+	union xhci_trb *cmd_trb;
+	u32 cycle_state;
+
+	if (xhci->cmd_ring->dequeue == xhci->cmd_ring->enqueue)
+		return;
+
+	/* find the current segment of command ring */
+	cur_seg = find_trb_seg(xhci->cmd_ring->first_seg,
+			xhci->cmd_ring->dequeue, &cycle_state);
+
+	/* find the command trb matched by cd from command ring */
+	for (cmd_trb = xhci->cmd_ring->dequeue;
+			cmd_trb != xhci->cmd_ring->enqueue;
+			next_trb(xhci, xhci->cmd_ring, &cur_seg, &cmd_trb)) {
+		/* If the trb is link trb, continue */
+		if (TRB_TYPE_LINK_LE32(cmd_trb->generic.field[3]))
+			continue;
+
+		if (cur_cd->cmd_trb == cmd_trb) {
+
+			/* If the command in device's command list, we should
+			 * finish it and free the command structure.
+			 */
+			if (cur_cd->command)
+				xhci_complete_cmd_in_cmd_wait_list(xhci,
+					cur_cd->command, COMP_CMD_STOP);
+
+			/* get cycle state from the origin command trb */
+			cycle_state = le32_to_cpu(cmd_trb->generic.field[3])
+				& TRB_CYCLE;
+
+			/* modify the command trb to NO OP command */
+			cmd_trb->generic.field[0] = 0;
+			cmd_trb->generic.field[1] = 0;
+			cmd_trb->generic.field[2] = 0;
+			cmd_trb->generic.field[3] = cpu_to_le32(
+					TRB_TYPE(TRB_CMD_NOOP) | cycle_state);
+			break;
+		}
+	}
+}
+
+static void xhci_cancel_cmd_in_cd_list(struct xhci_hcd *xhci)
+{
+	struct xhci_cd *cur_cd, *next_cd;
+
+	if (list_empty(&xhci->cancel_cmd_list))
+		return;
+
+	list_for_each_entry_safe(cur_cd, next_cd,
+			&xhci->cancel_cmd_list, cancel_cmd_list) {
+		xhci_cmd_to_noop(xhci, cur_cd);
+		list_del(&cur_cd->cancel_cmd_list);
+		kfree(cur_cd);
+	}
+}
+
+/*
+ * traversing the cancel_cmd_list. If the command descriptor according
+ * to cmd_trb is found, the function free it and return 1, otherwise
+ * return 0.
+ */
+static int xhci_search_cmd_trb_in_cd_list(struct xhci_hcd *xhci,
+		union xhci_trb *cmd_trb)
+{
+	struct xhci_cd *cur_cd, *next_cd;
+
+	if (list_empty(&xhci->cancel_cmd_list))
+		return 0;
+
+	list_for_each_entry_safe(cur_cd, next_cd,
+			&xhci->cancel_cmd_list, cancel_cmd_list) {
+		if (cur_cd->cmd_trb == cmd_trb) {
+			if (cur_cd->command)
+				xhci_complete_cmd_in_cmd_wait_list(xhci,
+					cur_cd->command, COMP_CMD_STOP);
+			list_del(&cur_cd->cancel_cmd_list);
+			kfree(cur_cd);
+			return 1;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * If the cmd_trb_comp_code is COMP_CMD_ABORT, we just check whether the
+ * trb pointed by the command ring dequeue pointer is the trb we want to
+ * cancel or not. And if the cmd_trb_comp_code is COMP_CMD_STOP, we will
+ * traverse the cancel_cmd_list to trun the all of the commands according
+ * to command descriptor to NO-OP trb.
+ */
+static int handle_stopped_cmd_ring(struct xhci_hcd *xhci,
+		int cmd_trb_comp_code)
+{
+	int cur_trb_is_good = 0;
+
+	/* Searching the cmd trb pointed by the command ring dequeue
+	 * pointer in command descriptor list. If it is found, free it.
+	 */
+	cur_trb_is_good = xhci_search_cmd_trb_in_cd_list(xhci,
+			xhci->cmd_ring->dequeue);
+
+	if (cmd_trb_comp_code == COMP_CMD_ABORT)
+		xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
+	else if (cmd_trb_comp_code == COMP_CMD_STOP) {
+		/* traversing the cancel_cmd_list and canceling
+		 * the command according to command descriptor
+		 */
+		xhci_cancel_cmd_in_cd_list(xhci);
+
+		xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
+		/*
+		 * ring command ring doorbell again to restart the
+		 * command ring
+		 */
+		if (xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue)
+			xhci_ring_cmd_db(xhci);
+	}
+	return cur_trb_is_good;
+}
+
 static void handle_cmd_completion(struct xhci_hcd *xhci,
 		struct xhci_event_cmd *event)
 {
@@ -1222,6 +1365,22 @@ static void handle_cmd_completion(struct
 		xhci->error_bitmask |= 1 << 5;
 		return;
 	}
+
+	if ((GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_ABORT) ||
+		(GET_COMP_CODE(le32_to_cpu(event->status)) == COMP_CMD_STOP)) {
+		/* If the return value is 0, we think the trb pointed by
+		 * command ring dequeue pointer is a good trb. The good
+		 * trb means we don't want to cancel the trb, but it have
+		 * been stopped by host. So we should handle it normally.
+		 * Otherwise, driver should invoke inc_deq() and return.
+		 */
+		if (handle_stopped_cmd_ring(xhci,
+				GET_COMP_CODE(le32_to_cpu(event->status)))) {
+			inc_deq(xhci, xhci->cmd_ring);
+			return;
+		}
+	}
+
 	switch (le32_to_cpu(xhci->cmd_ring->dequeue->generic.field[3])
 		& TRB_TYPE_BITMASK) {
 	case TRB_TYPE(TRB_ENABLE_SLOT):

[ 32/52] Increase XHCI suspend timeout to 16ms

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Spang <spang@chromium.org>

commit a6e097dfdfd189b6929af6efa1d289af61858386 upstream.

The Intel XHCI specification says that after clearing the run/stop bit
the controller may take up to 16ms to halt. We've seen a device take
14ms, which with the current timeout of 10ms causes the kernel to
abort the suspend. Increasing the timeout to the recommended value
fixes the problem.

This patch should be backported to kernels as old as 2.6.37, that
contain the commit 5535b1d5f8885695c6ded783c692e3c0d0eda8ca "USB: xHCI:
PCI power management implementation".

Signed-off-by: Michael Spang <spang@chromium.org>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/host/xhci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -890,7 +890,7 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	command &= ~CMD_RUN;
 	xhci_writel(xhci, command, &xhci->op_regs->command);
 	if (handshake(xhci, &xhci->op_regs->status,
-		      STS_HALT, STS_HALT, 100*100)) {
+		      STS_HALT, STS_HALT, XHCI_MAX_HALT_USEC)) {
 		xhci_warn(xhci, "WARN: xHC CMD_RUN timeout\n");
 		spin_unlock_irq(&xhci->lock);
 		return -ETIMEDOUT;

[ 33/52] ath9k: Disable ASPM only for AR9285

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sujith Manoharan <c_manoha@qualcomm.com>

commit 046b6802c8d3c8a57448485513bf7291633e0fa3 upstream.

Currently, ASPM is disabled for all WLAN+BT combo chipsets
when BTCOEX is enabled. This is incorrect since the workaround
is required only for WB195, which is a AR9285+AR3011 combo
solution. Fix this by checking for the HW version when enabling
the workaround.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Tested-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/pci.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -122,8 +122,9 @@ static void ath_pci_aspm_init(struct ath
 	if (!parent)
 		return;
 
-	if (ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) {
-		/* Bluetooth coexistance requires disabling ASPM. */
+	if ((ath9k_hw_get_btcoex_scheme(ah) != ATH_BTCOEX_CFG_NONE) &&
+	    (AR_SREV_9285(ah))) {
+		/* Bluetooth coexistance requires disabling ASPM for AR9285. */
 		pci_read_config_byte(pdev, pos + PCI_EXP_LNKCTL, &aspm);
 		aspm &= ~(PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
 		pci_write_config_byte(pdev, pos + PCI_EXP_LNKCTL, aspm);

[ 34/52] coredump: prevent double-free on an error path in core dumper

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Denys Vlasenko <vda.linux@googlemail.com>

commit f34f9d186df35e5c39163444c43b4fc6255e39c5 upstream.

In !CORE_DUMP_USE_REGSET case, if elf_note_info_init fails to allocate
memory for info->fields, it frees already allocated stuff and returns
error to its caller, fill_note_info.  Which in turn returns error to its
caller, elf_core_dump.  Which jumps to cleanup label and calls
free_note_info, which will happily try to free all info->fields again.
BOOM.

This is the fix.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Venu Byravarasu <vbyravarasu@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/binfmt_elf.c |   19 ++++---------------
 1 file changed, 4 insertions(+), 15 deletions(-)

--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -1698,30 +1698,19 @@ static int elf_note_info_init(struct elf
 		return 0;
 	info->psinfo = kmalloc(sizeof(*info->psinfo), GFP_KERNEL);
 	if (!info->psinfo)
-		goto notes_free;
+		return 0;
 	info->prstatus = kmalloc(sizeof(*info->prstatus), GFP_KERNEL);
 	if (!info->prstatus)
-		goto psinfo_free;
+		return 0;
 	info->fpu = kmalloc(sizeof(*info->fpu), GFP_KERNEL);
 	if (!info->fpu)
-		goto prstatus_free;
+		return 0;
 #ifdef ELF_CORE_COPY_XFPREGS
 	info->xfpu = kmalloc(sizeof(*info->xfpu), GFP_KERNEL);
 	if (!info->xfpu)
-		goto fpu_free;
+		return 0;
 #endif
 	return 1;
-#ifdef ELF_CORE_COPY_XFPREGS
- fpu_free:
-	kfree(info->fpu);
-#endif
- prstatus_free:
-	kfree(info->prstatus);
- psinfo_free:
-	kfree(info->psinfo);
- notes_free:
-	kfree(info->notes);
-	return 0;
 }
 
 static int fill_note_info(struct elfhdr *elf, int phdrs,

[ 35/52] n_gsm.c: Implement 3GPP27.010 DLC start-up procedure in MUX

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: xiaojin <jin.xiao@intel.com>

commit 7e8ac7b23b67416700dfb8b4136a4e81ce675b48 upstream.

In 3GPP27.010 5.8.1, it defined:
The TE multiplexer initiates the establishment of the multiplexer control channel by sending a SABM frame on DLCI 0 using the procedures of clause 5.4.1.
Once the multiplexer channel is established other DLCs may be established using the procedures of clause 5.4.1.
This patch implement 5.8.1 in MUX level, it make sure DLC0 is the first channel to be setup.

[or for those not familiar with the specification: it was possible to try
 and open a data connection while the control channel was not yet fully
 open, which is a spec violation and confuses some modems]

Signed-off-by: xiaojin <jin.xiao@intel.com>
Tested-by: Yin, Fengwei <fengwei.yin@intel.com>
[tweaked the order we check things and error code]
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/n_gsm.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -2889,6 +2889,10 @@ static int gsmtty_open(struct tty_struct
 	gsm = gsm_mux[mux];
 	if (gsm->dead)
 		return -EL2HLT;
+	/* If DLCI 0 is not yet fully open return an error. This is ok from a locking
+	   perspective as we don't have to worry about this if DLCI0 is lost */
+	if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN)
+		return -EL2NSYNC;
 	dlci = gsm->dlci[line];
 	if (dlci == NULL)
 		dlci = gsm_dlci_alloc(gsm, line);

[ 36/52] n_gsm: uplink SKBs accumulate on list

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russ Gorby <russ.gorby@intel.com>

commit 192b6041e75bb4a2aae73834037038cea139a92d upstream.

gsm_dlci_data_kick will not call any output function if tx_bytes > THRESH_LO
furthermore it will call the output function only once if tx_bytes == 0
If the size of the IP writes are on the order of THRESH_LO
we can get into a situation where skbs accumulate on the outbound list
being starved for events to call the output function.

gsm_dlci_data_kick now calls the sweep function when tx_bytes==0

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Tested-by: Kappel, LaurentX <laurentx.kappel@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/n_gsm.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -971,16 +971,19 @@ static void gsm_dlci_data_sweep(struct g
 static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
 {
 	unsigned long flags;
+	int sweep;
 
 	spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
 	/* If we have nothing running then we need to fire up */
+	sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
 	if (dlci->gsm->tx_bytes == 0) {
 		if (dlci->net)
 			gsm_dlci_data_output_framed(dlci->gsm, dlci);
 		else
 			gsm_dlci_data_output(dlci->gsm, dlci);
-	} else if (dlci->gsm->tx_bytes < TX_THRESH_LO)
-		gsm_dlci_data_sweep(dlci->gsm);
+	}
+	if (sweep)
+ 		gsm_dlci_data_sweep(dlci->gsm);
 	spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
 }
 

[ 37/52] n_gsm: added interlocking for gsm_data_lock for certain code paths

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russ Gorby <russ.gorby@intel.com>

commit 5e44708f75b0f8712da715d6babb0c21089b2317 upstream.

There were some locking holes in the management of the MUX's
message queue for 2 code paths:
1) gsmld_write_wakeup
2) receipt of CMD_FCON flow-control message
In both cases gsm_data_kick is called w/o locking so it can collide
with other other instances of gsm_data_kick (pulling messages tx_tail)
or potentially other instances of __gsm_data_queu (adding messages to tx_head)

Changed to take the tx_lock in these 2 cases

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Tested-by: Yin, Fengwei <fengwei.yin@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/n_gsm.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -1193,6 +1193,8 @@ static void gsm_control_message(struct g
 							u8 *data, int clen)
 {
 	u8 buf[1];
+	unsigned long flags;
+
 	switch (command) {
 	case CMD_CLD: {
 		struct gsm_dlci *dlci = gsm->dlci[0];
@@ -1218,7 +1220,9 @@ static void gsm_control_message(struct g
 		gsm->constipated = 0;
 		gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
 		/* Kick the link in case it is idling */
+		spin_lock_irqsave(&gsm->tx_lock, flags);
 		gsm_data_kick(gsm);
+		spin_unlock_irqrestore(&gsm->tx_lock, flags);
 		break;
 	case CMD_MSC:
 		/* Out of band modem line change indicator for a DLCI */
@@ -2380,12 +2384,12 @@ static void gsmld_write_wakeup(struct tt
 
 	/* Queue poll */
 	clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
+	spin_lock_irqsave(&gsm->tx_lock, flags);
 	gsm_data_kick(gsm);
 	if (gsm->tx_bytes < TX_THRESH_LO) {
-		spin_lock_irqsave(&gsm->tx_lock, flags);
 		gsm_dlci_data_sweep(gsm);
-		spin_unlock_irqrestore(&gsm->tx_lock, flags);
 	}
+	spin_unlock_irqrestore(&gsm->tx_lock, flags);
 }
 
 /**

[ 38/52] n_gsm: memory leak in uplink error path

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russ Gorby <russ.gorby@intel.com>

commit 88ed2a60610974443335c924d7cb8e5dcf9dbdc1 upstream.

Uplink (TX) network data will go through gsm_dlci_data_output_framed
there is a bug where if memory allocation fails, the skb which
has already been pulled off the list will be lost.

In addition TX skbs were being processed in LIFO order

Fixed the memory leak, and changed to FIFO order processing

Signed-off-by: Russ Gorby <russ.gorby@intel.com>
Tested-by: Kappel, LaurentX <laurentx.kappel@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/tty/n_gsm.c |    7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -875,7 +875,7 @@ static int gsm_dlci_data_output_framed(s
 
 	/* dlci->skb is locked by tx_lock */
 	if (dlci->skb == NULL) {
-		dlci->skb = skb_dequeue(&dlci->skb_list);
+		dlci->skb = skb_dequeue_tail(&dlci->skb_list);
 		if (dlci->skb == NULL)
 			return 0;
 		first = 1;
@@ -899,8 +899,11 @@ static int gsm_dlci_data_output_framed(s
 
 	/* FIXME: need a timer or something to kick this so it can't
 	   get stuck with no work outstanding and no buffer free */
-	if (msg == NULL)
+	if (msg == NULL) {
+		skb_queue_tail(&dlci->skb_list, dlci->skb);
+		dlci->skb = NULL;
 		return -ENOMEM;
+	}
 	dp = msg->data;
 
 	if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */

[ 39/52] UBI: fix autoresize handling in R/O mode

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

commit abb3e01103eb4e2ea5c15e6fedbc74e08bd4cc2b upstream.

Currently UBI fails in autoresize when it is in R/O mode (e.g., because the
underlying MTD device is R/O). This patch fixes the issue - we just skip
autoresize and print a warning.

Reported-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mtd/ubi/build.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
@@ -816,6 +816,11 @@ static int autoresize(struct ubi_device
 	struct ubi_volume *vol = ubi->volumes[vol_id];
 	int err, old_reserved_pebs = vol->reserved_pebs;
 
+	if (ubi->ro_mode) {
+		ubi_warn("skip auto-resize because of R/O mode");
+		return 0;
+	}
+
 	/*
 	 * Clear the auto-resize flag in the volume in-memory copy of the
 	 * volume table, and 'ubi_resize_volume()' will propagate this change

[ 40/52] Yama: handle 32-bit userspace prctl

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 2e4930eb7c8fb20a39dfb5f8a8f80402710dcea8 upstream.

When running a 64-bit kernel and receiving prctls from a 32-bit
userspace, the "-1" used as an unsigned long will end up being
misdetected. The kernel is looking for 0xffffffffffffffff instead of
0xffffffff. Since prctl lacks a distinct compat interface, Yama needs
to handle this translation itself. As such, support either value as
meaning PR_SET_PTRACER_ANY, to avoid breaking the ABI for 64-bit.

Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/yama/yama_lsm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/yama/yama_lsm.c
+++ b/security/yama/yama_lsm.c
@@ -138,7 +138,7 @@ static int yama_task_prctl(int option, u
 		if (arg2 == 0) {
 			yama_ptracer_del(NULL, myself);
 			rc = 0;
-		} else if (arg2 == PR_SET_PTRACER_ANY) {
+		} else if (arg2 == PR_SET_PTRACER_ANY || (int)arg2 == -1) {
 			rc = yama_ptracer_add(NULL, myself);
 		} else {
 			struct task_struct *tracer;

[ 41/52] SCSI: ibmvscsi: Fix host config length field overflow

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

commit 225c56960fcafeccc2b6304f96cd3f0dbf42a16a upstream.

The length field in the host config packet is only 16-bit long, so
passing it 0x10000 (64K which is our standard PAGE_SIZE) doesn't
work and result in an empty config from the server.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/ibmvscsi/ibmvscsi.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1541,6 +1541,9 @@ static int ibmvscsi_do_host_config(struc
 
 	host_config = &evt_struct->iu.mad.host_config;
 
+	/* The transport length field is only 16-bit */
+	length = min(0xffff, length);
+
 	/* Set up a lun reset SRP command */
 	memset(host_config, 0x00, sizeof(*host_config));
 	host_config->common.type = VIOSRP_HOST_CONFIG_TYPE;

[ 42/52] SCSI: hpsa: Use LUN reset instead of target reset

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>

commit 21e89afd325849eb38adccf382df16cc895911f9 upstream.

It turns out Smart Array logical drives do not support target
reset and when the target reset fails, the logical drive will
be taken off line.  Symptoms look like this:

hpsa 0000:03:00.0: Abort request on C1:B0:T0:L0
hpsa 0000:03:00.0: resetting device 1:0:0:0
hpsa 0000:03:00.0: cp ffff880037c56000 is reported invalid (probably means target device no longer present)
hpsa 0000:03:00.0: resetting device failed.
sd 1:0:0:0: Device offlined - not ready after error recovery
sd 1:0:0:0: rejecting I/O to offline device
EXT3-fs error (device sdb1): read_block_bitmap:

LUN reset is supported though, and is what we should be using.
Target reset is also disruptive in shared SAS situations,
for example, an external MSA1210m which does support target
reset attached to Smart Arrays in multiple hosts -- a target
reset from one host is disruptive to other hosts as all LUNs
on the target will be reset and will abort all outstanding i/os
back to all the attached hosts.  So we should use LUN reset,
not target reset.

Tested this with Smart Array logical drives and with tape drives.
Not sure how this bug survived since 2009, except it must be very
rare for a Smart Array to require more than 30s to complete a request.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/hpsa.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -2943,7 +2943,7 @@ static void fill_cmd(struct CommandList
 			c->Request.Timeout = 0; /* Don't time out */
 			memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
 			c->Request.CDB[0] =  cmd;
-			c->Request.CDB[1] = 0x03;  /* Reset target above */
+			c->Request.CDB[1] = HPSA_RESET_TYPE_LUN;
 			/* If bytes 4-7 are zero, it means reset the */
 			/* LunID device */
 			c->Request.CDB[4] = 0x00;

[ 43/52] can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Wei Yongjun <yongjun_wei@trendmicro.com.cn>

commit f61bd0585dfc7d99db4936d7467de4ca8e2f7ea0 upstream.

In case of error, the function clk_get() returns ERR_PTR()
and never returns NULL pointer. The NULL test in the error
handling should be replaced with IS_ERR().

dpatch engine is used to auto generated this patch.
(https://github.com/weiyj/dpatch)

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/mscan/mpc5xxx_can.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/can/mscan/mpc5xxx_can.c
+++ b/drivers/net/can/mscan/mpc5xxx_can.c
@@ -181,7 +181,7 @@ static u32 __devinit mpc512x_can_get_clo
 
 		if (!clock_name || !strcmp(clock_name, "sys")) {
 			sys_clk = clk_get(&ofdev->dev, "sys_clk");
-			if (!sys_clk) {
+			if (IS_ERR(sys_clk)) {
 				dev_err(&ofdev->dev, "couldn't get sys_clk\n");
 				goto exit_unmap;
 			}
@@ -204,7 +204,7 @@ static u32 __devinit mpc512x_can_get_clo
 
 		if (clocksrc < 0) {
 			ref_clk = clk_get(&ofdev->dev, "ref_clk");
-			if (!ref_clk) {
+			if (IS_ERR(ref_clk)) {
 				dev_err(&ofdev->dev, "couldn't get ref_clk\n");
 				goto exit_unmap;
 			}

[ 44/52] remoteproc: select VIRTIO to avoid build breakage

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ohad Ben-Cohen <ohad@wizery.com>

commit 2ed6d29c725c4aead510b5c23f563795b265acf5 upstream.

drivers/built-in.o: In function `rproc_virtio_finalize_features':
remoteproc_virtio.c:(.text+0x2f9a02): undefined reference to `vring_transport_features'
drivers/built-in.o: In function `rproc_virtio_del_vqs':
remoteproc_virtio.c:(.text+0x2f9a74): undefined reference to `vring_del_virtqueue'
drivers/built-in.o: In function `rproc_virtio_find_vqs':
remoteproc_virtio.c:(.text+0x2f9c44): undefined reference to `vring_new_virtqueue'
drivers/built-in.o: In function `rproc_add_virtio_dev':
(.text+0x2f9e2c): undefined reference to `register_virtio_device'
drivers/built-in.o: In function `rproc_vq_interrupt':
(.text+0x2f9db7): undefined reference to `vring_interrupt'
drivers/built-in.o: In function `rproc_remove_virtio_dev':
(.text+0x2f9e9f): undefined reference to `unregister_virtio_device'

Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/remoteproc/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -5,6 +5,7 @@ config REMOTEPROC
 	tristate
 	depends on EXPERIMENTAL
 	select FW_CONFIG
+	select VIRTIO
 
 config OMAP_REMOTEPROC
 	tristate "OMAP remoteproc support"

[ 45/52] remoteproc: fix a potential NULL-dereference on cleanup

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 7168d914a782086e217214c57ddfc7cc4b738c0c upstream.

We only need to allocate mapping if there is an IOMMU domain.

Otherwise, when the mappings are released, the assumption that
an IOMMU domain is there will crash and burn.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[ohad: revise commit log]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/remoteproc/remoteproc_core.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -643,17 +643,10 @@ static int rproc_handle_carveout(struct
 	dev_dbg(dev, "carveout rsc: da %x, pa %x, len %x, flags %x\n",
 			rsc->da, rsc->pa, rsc->len, rsc->flags);
 
-	mapping = kzalloc(sizeof(*mapping), GFP_KERNEL);
-	if (!mapping) {
-		dev_err(dev, "kzalloc mapping failed\n");
-		return -ENOMEM;
-	}
-
 	carveout = kzalloc(sizeof(*carveout), GFP_KERNEL);
 	if (!carveout) {
 		dev_err(dev, "kzalloc carveout failed\n");
-		ret = -ENOMEM;
-		goto free_mapping;
+		return -ENOMEM;
 	}
 
 	va = dma_alloc_coherent(dev, rsc->len, &dma, GFP_KERNEL);
@@ -683,11 +676,18 @@ static int rproc_handle_carveout(struct
 	 * physical address in this case.
 	 */
 	if (rproc->domain) {
+		mapping = kzalloc(sizeof(*mapping), GFP_KERNEL);
+		if (!mapping) {
+			dev_err(dev, "kzalloc mapping failed\n");
+			ret = -ENOMEM;
+			goto dma_free;
+		}
+
 		ret = iommu_map(rproc->domain, rsc->da, dma, rsc->len,
 								rsc->flags);
 		if (ret) {
 			dev_err(dev, "iommu_map failed: %d\n", ret);
-			goto dma_free;
+			goto free_mapping;
 		}
 
 		/*
@@ -728,12 +728,12 @@ static int rproc_handle_carveout(struct
 
 	return 0;
 
+free_mapping:
+	kfree(mapping);
 dma_free:
 	dma_free_coherent(dev, rsc->len, va, dma);
 free_carv:
 	kfree(carveout);
-free_mapping:
-	kfree(mapping);
 	return ret;
 }
 

[ 46/52] IPoIB: Fix use-after-free of multicast object

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrick McHardy <kaber@trash.net>

commit bea1e22df494a729978e7f2c54f7bda328f74bc3 upstream.

Fix a crash in ipoib_mcast_join_task().  (with help from Or Gerlitz)

Commit c8c2afe360b7 ("IPoIB: Use rtnl lock/unlock when changing device
flags") added a call to rtnl_lock() in ipoib_mcast_join_task(), which
is run from the ipoib_workqueue, and hence the workqueue can't be
flushed from the context of ipoib_stop().

In the current code, ipoib_stop() (which doesn't flush the workqueue)
calls ipoib_mcast_dev_flush(), which goes and deletes all the
multicast entries.  This takes place without any synchronization with
a possible running instance of ipoib_mcast_join_task() for the same
ipoib device, leading to a crash due to NULL pointer dereference.

Fix this by making sure that the workqueue is flushed before
ipoib_mcast_dev_flush() is called.  To make that possible, we move the
RTNL-lock wrapped code to ipoib_mcast_join_finish().

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/ipoib/ipoib_main.c      |    2 +-
 drivers/infiniband/ulp/ipoib/ipoib_multicast.c |   19 ++++++++++---------
 2 files changed, 11 insertions(+), 10 deletions(-)

--- a/drivers/infiniband/ulp/ipoib/ipoib_main.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c
@@ -148,7 +148,7 @@ static int ipoib_stop(struct net_device
 
 	netif_stop_queue(dev);
 
-	ipoib_ib_dev_down(dev, 0);
+	ipoib_ib_dev_down(dev, 1);
 	ipoib_ib_dev_stop(dev, 0);
 
 	if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -190,7 +190,9 @@ static int ipoib_mcast_join_finish(struc
 
 	mcast->mcmember = *mcmember;
 
-	/* Set the cached Q_Key before we attach if it's the broadcast group */
+	/* Set the multicast MTU and cached Q_Key before we attach if it's
+	 * the broadcast group.
+	 */
 	if (!memcmp(mcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
 		    sizeof (union ib_gid))) {
 		spin_lock_irq(&priv->lock);
@@ -198,10 +200,17 @@ static int ipoib_mcast_join_finish(struc
 			spin_unlock_irq(&priv->lock);
 			return -EAGAIN;
 		}
+		priv->mcast_mtu = IPOIB_UD_MTU(ib_mtu_enum_to_int(priv->broadcast->mcmember.mtu));
 		priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey);
 		spin_unlock_irq(&priv->lock);
 		priv->tx_wr.wr.ud.remote_qkey = priv->qkey;
 		set_qkey = 1;
+
+		if (!ipoib_cm_admin_enabled(dev)) {
+			rtnl_lock();
+			dev_set_mtu(dev, min(priv->mcast_mtu, priv->admin_mtu));
+			rtnl_unlock();
+		}
 	}
 
 	if (!test_bit(IPOIB_MCAST_FLAG_SENDONLY, &mcast->flags)) {
@@ -589,14 +598,6 @@ void ipoib_mcast_join_task(struct work_s
 		return;
 	}
 
-	priv->mcast_mtu = IPOIB_UD_MTU(ib_mtu_enum_to_int(priv->broadcast->mcmember.mtu));
-
-	if (!ipoib_cm_admin_enabled(dev)) {
-		rtnl_lock();
-		dev_set_mtu(dev, min(priv->mcast_mtu, priv->admin_mtu));
-		rtnl_unlock();
-	}
-
 	ipoib_dbg_mcast(priv, "successfully joined all multicast groups\n");
 
 	clear_bit(IPOIB_MCAST_RUN, &priv->flags);

[ 47/52] IB/srp: Fix use-after-free in srp_reset_req()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bvanassche@acm.org>

commit 9b796d06d5d1b1e85ae2316a283ea11dd739ef96 upstream.

srp_free_req() uses the scsi_cmnd structure contents to unmap
buffers, so we must invoke srp_free_req() before we release
ownership of that structure.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/srp/ib_srp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -638,9 +638,9 @@ static void srp_reset_req(struct srp_tar
 	struct scsi_cmnd *scmnd = srp_claim_req(target, req, NULL);
 
 	if (scmnd) {
+		srp_free_req(target, req, scmnd, 0);
 		scmnd->result = DID_RESET << 16;
 		scmnd->scsi_done(scmnd);
-		srp_free_req(target, req, scmnd, 0);
 	}
 }
 

[ 48/52] IB/srp: Avoid having aborted requests hang

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bvanassche@acm.org>

commit d8536670916a685df116b5c2cb256573fd25e4e3 upstream.

We need to call scsi_done() for commands after we abort them.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Acked-by: David Dillow <dillowda@ornl.gov>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/srp/ib_srp.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/infiniband/ulp/srp/ib_srp.c
+++ b/drivers/infiniband/ulp/srp/ib_srp.c
@@ -1687,6 +1687,7 @@ static int srp_abort(struct scsi_cmnd *s
 			  SRP_TSK_ABORT_TASK);
 	srp_free_req(target, req, scmnd, 0);
 	scmnd->result = DID_ABORT << 16;
+	scmnd->scsi_done(scmnd);
 
 	return SUCCESS;
 }

[ 49/52] isci: fix isci_pci_probe() generates warning on efi failure path

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 6d70a74ffd616073a68ae0974d98819bfa8e6da6 upstream.

The oem parameter image embedded in the efi variable is at an offset
from the start of the variable.  However, in the failure path we try to
free the 'orom' pointer which is only valid when the paramaters are
being read from the legacy option-rom space.

Since failure to load the oem parameters is unlikely and we keep the
memory around in the success case just defer all de-allocation to devm.

Reported-by: Don Morris <don.morris@hp.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/isci/init.c       |    1 -
 drivers/scsi/isci/probe_roms.c |    1 -
 2 files changed, 2 deletions(-)

--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -481,7 +481,6 @@ static int __devinit isci_pci_probe(stru
 						orom->hdr.version)) {
 			dev_warn(&pdev->dev,
 				 "[%d]: invalid oem parameters detected, falling back to firmware\n", i);
-			devm_kfree(&pdev->dev, orom);
 			orom = NULL;
 			break;
 		}
--- a/drivers/scsi/isci/probe_roms.c
+++ b/drivers/scsi/isci/probe_roms.c
@@ -104,7 +104,6 @@ struct isci_orom *isci_request_oprom(str
 
 	if (i >= len) {
 		dev_err(&pdev->dev, "oprom parse error\n");
-		devm_kfree(&pdev->dev, rom);
 		rom = NULL;
 	}
 	pci_unmap_biosrom(oprom);

[ 50/52] x86/alternatives: Fix p6 nops on non-modular kernels

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Avi Kivity <avi@redhat.com>

commit cb09cad44f07044d9810f18f6f9a6a6f3771f979 upstream.

Probably a leftover from the early days of self-patching, p6nops
are marked __initconst_or_module, which causes them to be
discarded in a non-modular kernel.  If something later triggers
patching, it will overwrite kernel code with garbage.

Reported-by: Tomas Racek <tracek@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: qemu-devel@nongnu.org
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/5034AE84.90708@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Ben Jencks <ben@bjencks.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/alternative.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -160,7 +160,7 @@ static const unsigned char * const k7_no
 #endif
 
 #ifdef P6_NOP1
-static const unsigned char  __initconst_or_module p6nops[] =
+static const unsigned char p6nops[] =
 {
 	P6_NOP1,
 	P6_NOP2,

[ 51/52] SCSI: scsi_remove_target: fix softlockup regression on hot remove

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <djbw@fb.com>

commit bc3f02a795d3b4faa99d37390174be2a75d091bd upstream.

John reports:
 BUG: soft lockup - CPU#2 stuck for 23s! [kworker/u:8:2202]
 [..]
 Call Trace:
  [<ffffffff8141782a>] scsi_remove_target+0xda/0x1f0
  [<ffffffff81421de5>] sas_rphy_remove+0x55/0x60
  [<ffffffff81421e01>] sas_rphy_delete+0x11/0x20
  [<ffffffff81421e35>] sas_port_delete+0x25/0x160
  [<ffffffff814549a3>] mptsas_del_end_device+0x183/0x270

...introduced by commit 3b661a9 "[SCSI] fix hot unplug vs async scan race".

Don't restart lookup of more stargets in the multi-target case, just
arrange to traverse the list once, on the assumption that new targets
are always added at the end.  There is no guarantee that the target will
change state in scsi_target_reap() so we can end up spinning if we
restart.

Acked-by: Jack Wang <jack_wang@usish.com>
LKML-Reference: <CAEhu1-6wq1YsNiscGMwP4ud0Q+MrViRzv=kcWCQSBNc8c68N5Q@mail.gmail.com>
Reported-by: John Drescher <drescherjm@gmail.com>
Tested-by: John Drescher <drescherjm@gmail.com>
Signed-off-by: Dan Williams <djbw@fb.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/scsi_sysfs.c |   30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -1023,33 +1023,31 @@ static void __scsi_remove_target(struct
 void scsi_remove_target(struct device *dev)
 {
 	struct Scsi_Host *shost = dev_to_shost(dev->parent);
-	struct scsi_target *starget, *found;
+	struct scsi_target *starget, *last = NULL;
 	unsigned long flags;
 
- restart:
-	found = NULL;
+	/* remove targets being careful to lookup next entry before
+	 * deleting the last
+	 */
 	spin_lock_irqsave(shost->host_lock, flags);
 	list_for_each_entry(starget, &shost->__targets, siblings) {
 		if (starget->state == STARGET_DEL)
 			continue;
 		if (starget->dev.parent == dev || &starget->dev == dev) {
-			found = starget;
-			found->reap_ref++;
-			break;
+			/* assuming new targets arrive at the end */
+			starget->reap_ref++;
+			spin_unlock_irqrestore(shost->host_lock, flags);
+			if (last)
+				scsi_target_reap(last);
+			last = starget;
+			__scsi_remove_target(starget);
+			spin_lock_irqsave(shost->host_lock, flags);
 		}
 	}
 	spin_unlock_irqrestore(shost->host_lock, flags);
 
-	if (found) {
-		__scsi_remove_target(found);
-		scsi_target_reap(found);
-		/* in the case where @dev has multiple starget children,
-		 * continue removing.
-		 *
-		 * FIXME: does such a case exist?
-		 */
-		goto restart;
-	}
+	if (last)
+		scsi_target_reap(last);
 }
 EXPORT_SYMBOL(scsi_remove_target);
 

[ 52/52] SCSI: scsi_dh_alua: Enable STPG for unavailable ports

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bvanassche@acm.org>

commit e47f8976d8e573928824a06748f7bc82c58d747f upstream.

A quote from SPC-4: "While in the unavailable primary target port
asymmetric access state, the device server shall support those of
the following commands that it supports while in the active/optimized
state: [ ... ] d) SET TARGET PORT GROUPS; [ ... ]". Hence enable
sending STPG to a target port group that is in the unavailable state.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Mike Christie <michaelc@cs.wisc.edu>
Acked-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/device_handler/scsi_dh_alua.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -583,8 +583,7 @@ static int alua_rtpg(struct scsi_device
 		h->state = TPGS_STATE_STANDBY;
 		break;
 	case TPGS_STATE_OFFLINE:
-	case TPGS_STATE_UNAVAILABLE:
-		/* Path unusable for unavailable/offline */
+		/* Path unusable */
 		err = SCSI_DH_DEV_OFFLINED;
 		break;
 	default: