Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace

public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed

* Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace_fd()
@ 2012-10-15 21:14 Pavel Roskin
  2012-10-15 21:51 ` Al Viro
  0 siblings, 1 reply; 7+ messages in thread
From: Pavel Roskin @ 2012-10-15 21:14 UTC (permalink / raw)
  To: Al Viro, linux-kernel

[-- Attachment #1: Type: text/plain, Size: 1191 bytes --]

Hello!

I tried the current mainline Linux on Fedora 16 x64_64 and found that I
cannot login in gdm.  I'm using gdm with LXDE.  After a few minutes,
kernel messages appear indicating a hung process gnome-settings-daemon.

Bisection found that the commit to blame is

commit 8280d16172243702ed43432f826ca6130edb4086
Author: Al Viro <viro@zeniv.linux.org.uk>
Date:   Tue Aug 21 12:11:46 2012 -0400

    new helper: replace_fd()

    analog of dup2(), except that it takes struct file * as source.

    Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Reverting the part of the patch that changes fs/exec.c is sufficient to
fix the login behavior.

I was able to forward port the change to the current mainline Linux.
The call to replace_fd() was moved to fs/coredump.c, so the patch
changes it.  Also, it copies __clear_close_on_exec() and
__set_open_fd() from fs/file.c

The .config file, the kernel log and the forward ported patch are
attached.

I'll try to figure out why replace_fd() is not good in
umh_pipe_setup(), but I'd like to report the problem as soon as
possible, as it's very visible to the users and I don't want others to
spend hours bisecting it.

-- 
Regards,
Pavel Roskin

[-- Attachment #2: dotconfig --]
[-- Type: application/octet-stream, Size: 78210 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.7.0-rc1 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION="-main"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_FHANDLE=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_WATCH=y
CONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y

#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not set
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=20
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EXPERT=y
CONFIG_HAVE_UID16=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_GENERIC_KERNEL_THREAD=y
CONFIG_GENERIC_KERNEL_EXECVE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_RCU_USER_QS=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
# CONFIG_X86_X2APIC is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
# CONFIG_MEMTEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CLEANCACHE=y
# CONFIG_FRONTSWAP is not set
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
CONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management and ACPI options
#
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_PROC_EVENT is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
CONFIG_INTEL_IDLE=y

#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
CONFIG_PCI_ATS=y
CONFIG_PCI_IOV=y
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
CONFIG_PCCARD=y
CONFIG_PCMCIA=y
# CONFIG_PCMCIA_LOAD_CIS is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_UNIX_DIAG=y
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
CONFIG_CFG80211_DEVELOPER_WARNINGS=y
CONFIG_CFG80211_REG_DEBUG=y
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_MESSAGE_TRACING is not set
CONFIG_MAC80211_DEBUG_MENU=y
CONFIG_MAC80211_NOINLINE=y
CONFIG_MAC80211_VERBOSE_DEBUG=y
# CONFIG_MAC80211_MLME_DEBUG is not set
# CONFIG_MAC80211_STA_DEBUG is not set
CONFIG_MAC80211_HT_DEBUG=y
CONFIG_MAC80211_IBSS_DEBUG=y
# CONFIG_MAC80211_PS_DEBUG is not set
# CONFIG_MAC80211_TDLS_DEBUG is not set
CONFIG_MAC80211_DEBUG_COUNTERS=y
# CONFIG_WIMAX is not set
CONFIG_RFKILL=y
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
CONFIG_DEBUG_DEVRES=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_DMA_SHARED_BUFFER=y

#
# Bus devices
#
# CONFIG_OMAP_OCP2SCP is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_HIGHBANK is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
CONFIG_MII=y
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EXAR is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=y
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_SFC is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
CONFIG_AIRO=m
# CONFIG_ATMEL is not set
CONFIG_AT76C50X_USB=m
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
CONFIG_ATH_COMMON=m
CONFIG_ATH_DEBUG=y
CONFIG_ATH5K=m
CONFIG_ATH5K_DEBUG=y
CONFIG_ATH5K_TRACER=y
CONFIG_ATH5K_PCI=y
CONFIG_ATH9K_HW=m
CONFIG_ATH9K_COMMON=m
# CONFIG_ATH9K_BTCOEX_SUPPORT is not set
CONFIG_ATH9K=m
CONFIG_ATH9K_PCI=y
# CONFIG_ATH9K_AHB is not set
CONFIG_ATH9K_DEBUGFS=y
CONFIG_ATH9K_MAC_DEBUG=y
CONFIG_ATH9K_RATE_CONTROL=y
CONFIG_ATH9K_HTC=m
CONFIG_ATH9K_HTC_DEBUGFS=y
CONFIG_CARL9170=m
CONFIG_CARL9170_LEDS=y
CONFIG_CARL9170_DEBUGFS=y
CONFIG_CARL9170_WPC=y
# CONFIG_CARL9170_HWRNG is not set
# CONFIG_ATH6KL is not set
CONFIG_B43=m
CONFIG_B43_SSB=y
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
CONFIG_B43_PIO=y
# CONFIG_B43_PHY_N is not set
# CONFIG_B43_PHY_LP is not set
CONFIG_B43_PHY_HT=y
CONFIG_B43_LEDS=y
CONFIG_B43_HWRNG=y
CONFIG_B43_DEBUG=y
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
CONFIG_B43LEGACY_LEDS=y
CONFIG_B43LEGACY_HWRNG=y
CONFIG_B43LEGACY_DEBUG=y
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_BRCMFMAC is not set
CONFIG_HOSTAP=m
# CONFIG_HOSTAP_FIRMWARE is not set
# CONFIG_HOSTAP_PLX is not set
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_IWLWIFI is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
CONFIG_HERMES=m
# CONFIG_HERMES_PRISM is not set
CONFIG_HERMES_CACHE_FW_ON_INIT=y
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ORINOCO_USB is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL_TI is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1920
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1080
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_MMAP is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=y
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set

#
# PPS support
#
# CONFIG_PPS is not set

#
# PPS generators support
#

#
# PTP clock support
#

#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_CORETEMP=y
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SCH5627 is not set
# CONFIG_SENSORS_SCH5636 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_CPU_THERMAL=y
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_F71808E_WDT is not set
# CONFIG_SP5100_TCO is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_IE6XX_WDT is not set
# CONFIG_ITCO_WDT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_IT87_WDT=y
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_NV_TCO is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_VIA_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_BLOCKIO=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_SILENT is not set
CONFIG_SSB_DEBUG=y
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_STMPE is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_LPC_SCH is not set
# CONFIG_LPC_ICH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_MEDIA_CAMERA_SUPPORT=y
# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set
# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set
# CONFIG_MEDIA_RADIO_SUPPORT is not set
# CONFIG_MEDIA_RC_SUPPORT is not set
# CONFIG_MEDIA_CONTROLLER is not set
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set

#
# Media drivers
#
# CONFIG_MEDIA_USB_SUPPORT is not set
# CONFIG_MEDIA_PCI_SUPPORT is not set
# CONFIG_V4L_PLATFORM_DRIVERS is not set
# CONFIG_V4L_MEM2MEM_DRIVERS is not set
# CONFIG_V4L_TEST_DRIVERS is not set

#
# Supported MMC/SDIO adapters
#

#
# Media ancillary drivers (tuners, sensors, i2c, frontends)
#

#
# Encoders, decoders, sensors and other helper chips
#

#
# Audio decoders, processors and mixers
#
# CONFIG_VIDEO_TVAUDIO is not set
# CONFIG_VIDEO_TDA7432 is not set
# CONFIG_VIDEO_TDA9840 is not set
# CONFIG_VIDEO_TEA6415C is not set
# CONFIG_VIDEO_TEA6420 is not set
# CONFIG_VIDEO_MSP3400 is not set
# CONFIG_VIDEO_CS5345 is not set
# CONFIG_VIDEO_CS53L32A is not set
# CONFIG_VIDEO_TLV320AIC23B is not set
# CONFIG_VIDEO_WM8775 is not set
# CONFIG_VIDEO_WM8739 is not set
# CONFIG_VIDEO_VP27SMPX is not set

#
# RDS decoders
#
# CONFIG_VIDEO_SAA6588 is not set

#
# Video decoders
#
# CONFIG_VIDEO_ADV7180 is not set
# CONFIG_VIDEO_ADV7183 is not set
# CONFIG_VIDEO_BT819 is not set
# CONFIG_VIDEO_BT856 is not set
# CONFIG_VIDEO_BT866 is not set
# CONFIG_VIDEO_KS0127 is not set
# CONFIG_VIDEO_SAA7110 is not set
# CONFIG_VIDEO_SAA711X is not set
# CONFIG_VIDEO_SAA7191 is not set
# CONFIG_VIDEO_TVP514X is not set
# CONFIG_VIDEO_TVP5150 is not set
# CONFIG_VIDEO_TVP7002 is not set
# CONFIG_VIDEO_VPX3220 is not set

#
# Video and audio decoders
#
# CONFIG_VIDEO_SAA717X is not set
# CONFIG_VIDEO_CX25840 is not set

#
# MPEG video encoders
#
# CONFIG_VIDEO_CX2341X is not set

#
# Video encoders
#
# CONFIG_VIDEO_SAA7127 is not set
# CONFIG_VIDEO_SAA7185 is not set
# CONFIG_VIDEO_ADV7170 is not set
# CONFIG_VIDEO_ADV7175 is not set
# CONFIG_VIDEO_ADV7343 is not set
# CONFIG_VIDEO_ADV7393 is not set
# CONFIG_VIDEO_AK881X is not set

#
# Camera sensor devices
#
# CONFIG_VIDEO_OV7670 is not set
# CONFIG_VIDEO_VS6624 is not set
# CONFIG_VIDEO_MT9V011 is not set
# CONFIG_VIDEO_TCM825X is not set
# CONFIG_VIDEO_SR030PC30 is not set

#
# Flash devices
#

#
# Video improvement chips
#
# CONFIG_VIDEO_UPD64031A is not set
# CONFIG_VIDEO_UPD64083 is not set

#
# Miscelaneous helper chips
#
# CONFIG_VIDEO_THS7303 is not set
# CONFIG_VIDEO_M52790 is not set

#
# Sensors used on soc_camera driver
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_AU8522_V4L is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
# CONFIG_DVB_TUNER_DIB0090 is not set

#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I810 is not set
CONFIG_DRM_I915=y
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=y
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
# CONFIG_SND_DRIVERS is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_HDA_HWDEP=y
# CONFIG_SND_HDA_RECONFIG is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_HDMI is not set
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
# CONFIG_SND_HDA_GENERIC is not set
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set

#
# HID support
#
CONFIG_HID=y
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=y
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
CONFIG_USB_UAS=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set
# CONFIG_USB_SERIAL_ZIO is not set
# CONFIG_USB_SERIAL_ZTE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set

#
# USB Physical Layer drivers
#
# CONFIG_OMAP_USB2 is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set

#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_TRIGGERS=y

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y

#
# Reporting subsystems
#
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
# CONFIG_EDAC_MM_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# SPI RTC drivers
#

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
# CONFIG_RTC_DRV_DS2404 is not set

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
CONFIG_STAGING=y
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_W35UND is not set
CONFIG_PRISM2_USB=m
# CONFIG_ECHO is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTLLIB is not set
# CONFIG_R8712U is not set
# CONFIG_RTS_PSTOR is not set
# CONFIG_RTS5139 is not set
# CONFIG_TRANZPORT is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_DX_SEP is not set
# CONFIG_ZSMALLOC is not set
# CONFIG_WLAGS49_H2 is not set
# CONFIG_WLAGS49_H25 is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_CRYSTALHD is not set
# CONFIG_FB_XGI is not set
# CONFIG_ACPI_QUICKSTART is not set
# CONFIG_USB_ENESTORAGE is not set
# CONFIG_BCM_WIMAX is not set
# CONFIG_FT1000 is not set

#
# Speakup console speech
#
# CONFIG_SPEAKUP is not set
# CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set
# CONFIG_STAGING_MEDIA is not set

#
# Android
#
# CONFIG_ANDROID is not set
# CONFIG_PHONE is not set
# CONFIG_USB_WPAN_HCD is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_WIMAX_GDM72XX is not set
# CONFIG_NET_VENDOR_SILICOM is not set
# CONFIG_CED1401 is not set
# CONFIG_DGRP is not set
# CONFIG_X86_PLATFORM_DEVICES is not set

#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set
CONFIG_DMAR_TABLE=y
# CONFIG_INTEL_IOMMU is not set
CONFIG_IRQ_REMAP=y

#
# Remoteproc drivers (EXPERIMENTAL)
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=y
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_PSTORE=y
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_RAM is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_DEBUG_OBJECTS_TIMERS=y
CONFIG_DEBUG_OBJECTS_WORK=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y
CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
# CONFIG_PROVE_RCU_REPEATEDLY is not set
CONFIG_SPARSE_RCU_POINTER=y
CONFIG_LOCKDEP=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_ATOMIC_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VM_RB is not set
CONFIG_DEBUG_VIRTUAL=y
CONFIG_DEBUG_WRITECOUNT=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_TEST_LIST_SORT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_DEBUG_CREDENTIALS=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
CONFIG_DEBUG_BLOCK_EXT_DEVT=y
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_DEBUG_PER_CPU_MAPS=y
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
# CONFIG_EVENT_POWER_TRACING_DEPRECATED is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_UPROBE_EVENT is not set
# CONFIG_PROBE_EVENTS is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
CONFIG_MMIOTRACE_TEST=m
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_BUILD_DOCSRC is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_KMEMCHECK is not set
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_SET_MODULE_RONX is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_IOMMU_DEBUG=y
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
CONFIG_CPA_DEBUG=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
CONFIG_DEBUG_NMI_SELFTEST=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA1_SSSE3=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
# CONFIG_CPUMASK_OFFSTACK is not set
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set

[-- Attachment #3: kernel.log --]
[-- Type: text/x-log, Size: 194528 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.7.0-rc1-main (proski@mj) (gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC) ) #116 SMP Mon Oct 15 11:47:27 EDT 2012
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc1-main root=UUID=69ea49b8-e1c0-494e-a5b2-3e0f4850decf ro
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cf69ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf6a0000-0x00000000cf6adfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000cf6ae000-0x00000000cf6effff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf6f0000-0x00000000cf6fdfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI present.
[    0.000000] DMI: ECS G31T-M/G31T-M, BIOS 080014  01/07/2009
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CBFFF write-protect
[    0.000000]   CC000-DFFFF uncachable
[    0.000000]   E0000-EFFFF write-through
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F00000000 write-back
[    0.000000]   1 base 100000000 mask FE0000000 write-back
[    0.000000]   2 base 120000000 mask FF0000000 write-back
[    0.000000]   3 base 0D0000000 mask FF0000000 uncachable
[    0.000000]   4 base 0E0000000 mask FE0000000 uncachable
[    0.000000]   5 base 0CF700000 mask FFFF00000 uncachable
[    0.000000]   6 base 0CF800000 mask FFF800000 uncachable
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: update [mem 0xcf700000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xcf6a0 max_arch_pfn = 0x400000000
[    0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0xcf69ffff]
[    0.000000]  [mem 0x00000000-0xcf69ffff] page 4k
[    0.000000] kernel direct mapping tables up to 0xcf69ffff @ [mem 0x1f97f000-0x1fffffff]
[    0.000000] init_memory_mapping: [mem 0x100000000-0x12fffffff]
[    0.000000]  [mem 0x100000000-0x12fffffff] page 4k
[    0.000000] kernel direct mapping tables up to 0x12fffffff @ [mem 0xced1a000-0xcf69ffff]
[    0.000000] RAMDISK: [mem 0x375f0000-0x37aeffff]
[    0.000000] ACPI: RSDP 00000000000f9c40 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000cf6a0000 00040 (v01 010709 RSDT1731 20090107 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cf6a0200 00084 (v01 010709 FACP1731 20090107 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cf6a0440 05AF2 (v01  1AAAA 1AAAA000 00000000 INTL 20051117)
[    0.000000] ACPI: FACS 00000000cf6ae000 00040
[    0.000000] ACPI: APIC 00000000cf6a0390 0006C (v01 010709 APIC1731 20090107 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cf6a0400 0003C (v01 010709 OEMMCFG  20090107 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cf6ae040 00071 (v01 010709 OEMB1731 20090107 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cf6a5f40 00038 (v01 010709 OEMHPET  20090107 MSFT 00000097)
[    0.000000] ACPI: GSCI 00000000cf6ae0c0 02024 (v01 010709 GMCHSCI  20090107 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cf6b1330 00A7C (v01 DpgPmm    CpuPm 00000012 INTL 20051117)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x12fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0xcf69ffff]
[    0.000000]   node   0: [mem 0x100000000-0x12fffffff]
[    0.000000] On node 0 totalpages: 1046063
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3913 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 16320 pages used for memmap
[    0.000000]   DMA32 zone: 829152 pages, LIFO batch:31
[    0.000000]   Normal zone: 3072 pages used for memmap
[    0.000000]   Normal zone: 193536 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] e820: [mem 0xcf6fe000-0xfedfffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s80512 r8192 d21888 u524288
[    0.000000] pcpu-alloc: s80512 r8192 d21888 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1026601
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.0-rc1-main root=UUID=69ea49b8-e1c0-494e-a5b2-3e0f4850decf ro
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Memory: 4010092k/4980736k available (6008k kernel code, 796484k absent, 174160k reserved, 4833k data, 556k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU lockdep checking is enabled.
[    0.000000] NR_IRQS:4352 nr_irqs:712 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 5855 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:             |  ok  |             |  ok  |
[    0.000000]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.000000]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.000000]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.000000]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.000000]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000000]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.000000]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000000]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000000]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.000000]       hard-irq read-recursion/123:  ok  |
[    0.000000]       soft-irq read-recursion/123:  ok  |
[    0.000000]       hard-irq read-recursion/132:  ok  |
[    0.000000]       soft-irq read-recursion/132:  ok  |
[    0.000000]       hard-irq read-recursion/213:  ok  |
[    0.000000]       soft-irq read-recursion/213:  ok  |
[    0.000000]       hard-irq read-recursion/231:  ok  |
[    0.000000]       soft-irq read-recursion/231:  ok  |
[    0.000000]       hard-irq read-recursion/312:  ok  |
[    0.000000]       soft-irq read-recursion/312:  ok  |
[    0.000000]       hard-irq read-recursion/321:  ok  |
[    0.000000]       soft-irq read-recursion/321:  ok  |
[    0.000000] -------------------------------------------------------
[    0.000000] Good, all 218 testcases passed! |
[    0.000000] ---------------------------------
[    0.000000] ODEBUG: 17 of 17 active objects replaced
[    0.000000] ODEBUG: selftest passed
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2394.063 MHz processor
[    0.001003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.12 BogoMIPS (lpj=2394063)
[    0.001129] pid_max: default: 32768 minimum: 301
[    0.002080] Mount-cache hash table entries: 256
[    0.004100] Initializing cgroup subsys cpuacct
[    0.004164] Initializing cgroup subsys freezer
[    0.004452] CPU: Physical Processor ID: 0
[    0.004512] CPU: Processor Core ID: 0
[    0.004571] mce: CPU supports 6 MCE banks
[    0.004640] CPU0: Thermal monitoring enabled (TM2)
[    0.004706] process: using mwait in idle threads
[    0.004770] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.004770] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
[    0.004770] tlb_flushall_shift: -1
[    0.004960] debug: unmapping init [mem 0xffffffff81b23000-0xffffffff81b27fff]
[    0.005033] ACPI: Core revision 20120913
[    0.091560] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.101633] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (fam: 06, model: 0f, stepping: 0b)
[    0.102000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.102000] perf_event_intel: PEBS disabled due to CPU errata
[    0.102000] ... version:                2
[    0.102000] ... bit width:              40
[    0.102000] ... generic registers:      2
[    0.102000] ... value mask:             000000ffffffffff
[    0.102000] ... max period:             000000007fffffff
[    0.102000] ... fixed-purpose events:   3
[    0.102000] ... event mask:             0000000700000003
[    0.103899] SMP alternatives: lockdep: fixing up alternatives
[    0.116385] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.103985] smpboot: Booting Node   0, Processors  #1
[    0.117631] SMP alternatives: lockdep: fixing up alternatives
[    0.117745]  #2
[    0.130544] SMP alternatives: lockdep: fixing up alternatives
[    0.130658]  #3 OK
[    0.142025] Brought up 4 CPUs
[    0.142101] ----------------
[    0.143002] | NMI testsuite:
[    0.143058] --------------------
[    0.143115]   remote IPI:  ok  |
[    0.148131]    local IPI:  ok  |
[    0.158011] --------------------
[    0.158074] Good, all   2 testcases passed! |
[    0.158149] ---------------------------------
[    0.158210] smpboot: Total of 4 processors activated (19152.50 BogoMIPS)
[    0.161006] devtmpfs: initialized
[    0.163773] PM: Registering ACPI NVS region [mem 0xcf6ae000-0xcf6effff] (270336 bytes)
[    0.165232] NET: Registered protocol family 16
[    0.165483] kworker/u:0 (32) used greatest stack depth: 5152 bytes left
[    0.169244] ACPI: bus type pci registered
[    0.170106] PCI: Using configuration type 1 for base access
[    0.171136] kworker/u:0 (45) used greatest stack depth: 4720 bytes left
[    0.235266] bio: create slab <bio-0> at 0
[    0.236254] ACPI: Added _OSI(Module Device)
[    0.236254] ACPI: Added _OSI(Processor Device)
[    0.236254] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.236254] ACPI: Added _OSI(Processor Aggregator Device)
[    0.241404] ACPI: EC: Look up EC in DSDT
[    0.294978] ACPI: Executed 1 blocks of module-level executable AML code
[    0.396870] ACPI: SSDT 00000000cf6b00f0 00277 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.399326] ACPI: Dynamic OEM Table Load:
[    0.399424] ACPI: SSDT           (null) 00277 (v01 DpgPmm  P001Ist 00000011 INTL 20051117)
[    0.411519] ACPI: SSDT 00000000cf6b0580 00277 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
[    0.413985] ACPI: Dynamic OEM Table Load:
[    0.414075] ACPI: SSDT           (null) 00277 (v01 DpgPmm  P002Ist 00000012 INTL 20051117)
[    0.426144] ACPI: SSDT 00000000cf6b0a10 00277 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
[    0.428603] ACPI: Dynamic OEM Table Load:
[    0.428701] ACPI: SSDT           (null) 00277 (v01 DpgPmm  P003Ist 00000012 INTL 20051117)
[    0.441146] ACPI: SSDT 00000000cf6b0ea0 00277 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
[    0.443644] ACPI: Dynamic OEM Table Load:
[    0.443741] ACPI: SSDT           (null) 00277 (v01 DpgPmm  P004Ist 00000012 INTL 20051117)
[    0.489248] ACPI: Interpreter enabled
[    0.489308] ACPI: (supports S0 S3 S5)
[    0.489734] ACPI: Using IOAPIC for interrupt routing
[    0.754661] ACPI: No dock devices found.
[    0.754727] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.761949] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.768107] PCI host bridge to bus 0000:00
[    0.768140] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.768158] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.768158] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.768178] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.768251] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[    0.768324] pci_bus 0000:00: root bus resource [mem 0xcf700000-0xdfffffff]
[    0.768397] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[    0.768529] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[    0.768672] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000
[    0.768696] pci 0000:00:02.0: reg 10: [mem 0xfe180000-0xfe1fffff]
[    0.768706] pci 0000:00:02.0: reg 14: [io  0xcc00-0xcc07]
[    0.768715] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[    0.768725] pci 0000:00:02.0: reg 1c: [mem 0xfe000000-0xfe0fffff]
[    0.768816] pci 0000:00:02.1: [8086:29c3] type 00 class 0x038000
[    0.768831] pci 0000:00:02.1: reg 10: [mem 0xfdf80000-0xfdffffff]
[    0.769060] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.769081] pci 0000:00:1b.0: reg 10: [mem 0xfe178000-0xfe17bfff 64bit]
[    0.769193] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.769266] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.769381] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.769437] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.769494] pci 0000:00:1d.0: reg 20: [io  0xc880-0xc89f]
[    0.769557] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.769624] pci 0000:00:1d.1: reg 20: [io  0xc800-0xc81f]
[    0.769686] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.769753] pci 0000:00:1d.2: reg 20: [io  0xc480-0xc49f]
[    0.769844] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.769901] pci 0000:00:1d.3: reg 20: [io  0xc400-0xc41f]
[    0.769991] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.770023] pci 0000:00:1d.7: reg 10: [mem 0xfe177c00-0xfe177fff]
[    0.770157] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.770199] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.770323] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.770450] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[    0.770619] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.770642] pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
[    0.770661] pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
[    0.770674] pci 0000:00:1f.1: reg 18: [io  0x08f0-0x08f7]
[    0.770686] pci 0000:00:1f.1: reg 1c: [io  0x08f8-0x08fb]
[    0.770699] pci 0000:00:1f.1: reg 20: [io  0xffa0-0xffaf]
[    0.770788] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.770808] pci 0000:00:1f.2: reg 10: [io  0xc080-0xc087]
[    0.770820] pci 0000:00:1f.2: reg 14: [io  0xc000-0xc003]
[    0.770832] pci 0000:00:1f.2: reg 18: [io  0xbc00-0xbc07]
[    0.770843] pci 0000:00:1f.2: reg 1c: [io  0xb880-0xb883]
[    0.770855] pci 0000:00:1f.2: reg 20: [io  0xb800-0xb80f]
[    0.770926] pci 0000:00:1f.2: PME# supported from D3hot
[    0.770961] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.771036] pci 0000:00:1f.3: reg 20: [io  0x0400-0x041f]
[    0.771231] pci 0000:01:00.0: [10ec:8136] type 00 class 0x020000
[    0.771253] pci 0000:01:00.0: reg 10: [io  0xd800-0xd8ff]
[    0.771294] pci 0000:01:00.0: reg 18: [mem 0xfe2ff000-0xfe2fffff 64bit]
[    0.771340] pci 0000:01:00.0: reg 30: [mem 0xfe2c0000-0xfe2dffff pref]
[    0.771476] pci 0000:01:00.0: supports D1 D2
[    0.771479] pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.771507] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.771686] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.771751] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    0.771757] pci 0000:00:1c.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    0.771855] pci 0000:02:01.0: [3388:0021] type 01 class 0x060400
[    0.772003] pci 0000:02:01.0: supports D1 D2
[    0.772006] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[    0.772070] pci 0000:02:02.0: [1180:0475] type 02 class 0x060700
[    0.772094] pci 0000:02:02.0: reg 10: [mem 0x00000000-0x00000fff]
[    0.772151] pci 0000:02:02.0: supports D1 D2
[    0.772154] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.772228] pci 0000:00:1e.0: PCI bridge to [bus 02-04] (subtractive decode)
[    0.772299] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    0.772304] pci 0000:00:1e.0:   bridge window [mem 0xfe300000-0xfebfffff]
[    0.772312] pci 0000:00:1e.0:   bridge window [mem 0xfb000000-0xfcffffff 64bit pref]
[    0.772322] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.772331] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.772340] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.772349] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[    0.772358] pci 0000:00:1e.0:   bridge window [mem 0xcf700000-0xdfffffff] (subtractive decode)
[    0.772366] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[    0.772494] pci 0000:03:08.0: [168c:0013] type 00 class 0x028000
[    0.772524] pci 0000:03:08.0: reg 10: [mem 0xfe3f0000-0xfe3fffff]
[    0.772729] pci 0000:03:09.0: [168c:0013] type 00 class 0x028000
[    0.772758] pci 0000:03:09.0: reg 10: [mem 0xfe3e0000-0xfe3effff]
[    0.772963] pci 0000:03:0b.0: [168c:0013] type 00 class 0x028000
[    0.772993] pci 0000:03:0b.0: reg 10: [mem 0xfe3d0000-0xfe3dffff]
[    0.773212] pci 0000:02:01.0: PCI bridge to [bus 03]
[    0.773285] pci 0000:02:01.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    0.773359] pci_bus 0000:04: busn_res: can not insert [bus 04-ff] under [bus 02-04] (conflicts with (null) [bus 02-04])
[    0.773367] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 07
[    0.773370] pci_bus 0000:04: busn_res: can not insert [bus 04-07] under [bus 02-04] (conflicts with (null) [bus 02-04])
[    0.773375] pci_bus 0000:04: [bus 04-07] partially hidden behind transparent bridge 0000:02 [bus 02-04]
[    0.773492] pci_bus 0000:00: on NUMA node 0
[    0.773516] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.779335] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.782786] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[    0.789453]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[    1.058731] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[    1.060212] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.061802] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[    1.063292] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[    1.064775] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.066334] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[    1.067823] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[    1.069383] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[    1.072091] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.072205] vgaarb: loaded
[    1.072262] vgaarb: bridge control possible 0000:00:02.0
[    1.074130] SCSI subsystem initialized
[    1.074130] ACPI: bus type scsi registered
[    1.075227] libata version 3.00 loaded.
[    1.076162] ACPI: bus type usb registered
[    1.077260] usbcore: registered new interface driver usbfs
[    1.077291] usbcore: registered new interface driver hub
[    1.078108] usbcore: registered new device driver usb
[    1.079158] Linux video capture interface: v2.00
[    1.081227] Advanced Linux Sound Architecture Driver Initialized.
[    1.081293] PCI: Using ACPI for IRQ routing
[    1.081293] PCI: pci_cache_line_size set to 64 bytes
[    1.081293] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.081293] e820: reserve RAM buffer [mem 0xcf6a0000-0xcfffffff]
[    1.084135] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.084158] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    1.084295] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    1.087096] Switching to clocksource hpet
[    1.132582] pnp: PnP ACPI init
[    1.132763] ACPI: bus type pnp registered
[    1.135346] pnp 00:00: [bus 00-ff]
[    1.135355] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.135364] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.135372] pnp 00:00: [io  0x0d00-0xffff window]
[    1.135390] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.135398] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[    1.135407] pnp 00:00: [mem 0xcf700000-0xdfffffff window]
[    1.135415] pnp 00:00: [mem 0xf0000000-0xffffffff window]
[    1.135911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.136074] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[    1.136623] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[    1.136699] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.137309] pnp 00:02: [dma 4]
[    1.137318] pnp 00:02: [io  0x0000-0x000f]
[    1.137326] pnp 00:02: [io  0x0081-0x0083]
[    1.137334] pnp 00:02: [io  0x0087]
[    1.137342] pnp 00:02: [io  0x0089-0x008b]
[    1.137349] pnp 00:02: [io  0x008f]
[    1.137357] pnp 00:02: [io  0x00c0-0x00df]
[    1.137802] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.138000] pnp 00:03: [io  0x0070-0x0071]
[    1.138047] pnp 00:03: [irq 8]
[    1.138492] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.138641] pnp 00:04: [io  0x0061]
[    1.139110] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    1.139260] pnp 00:05: [io  0x00f0-0x00ff]
[    1.139275] pnp 00:05: [irq 13]
[    1.139714] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.169335] pnp 00:06: [io  0x03f8-0x03ff]
[    1.169352] pnp 00:06: [irq 4]
[    1.169368] pnp 00:06: [dma 0 disabled]
[    1.170264] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.231552] pnp 00:07: [io  0x0000-0xffffffffffffffff disabled]
[    1.231561] pnp 00:07: [io  0x0a00-0x0a0f]
[    1.231569] pnp 00:07: [io  0x0a10-0x0a1f]
[    1.231577] pnp 00:07: [io  0x0a20-0x0a2f]
[    1.231584] pnp 00:07: [io  0x0a30-0x0a3f]
[    1.232116] system 00:07: [io  0x0a00-0x0a0f] has been reserved
[    1.232198] system 00:07: [io  0x0a10-0x0a1f] has been reserved
[    1.232279] system 00:07: [io  0x0a20-0x0a2f] has been reserved
[    1.232359] system 00:07: [io  0x0a30-0x0a3f] has been reserved
[    1.232431] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.234805] pnp 00:08: [io  0x0010-0x001f]
[    1.234813] pnp 00:08: [io  0x0022-0x003f]
[    1.234821] pnp 00:08: [io  0x0044-0x005f]
[    1.234829] pnp 00:08: [io  0x0062-0x0063]
[    1.234836] pnp 00:08: [io  0x0065-0x006f]
[    1.234852] pnp 00:08: [io  0x0072-0x007f]
[    1.234860] pnp 00:08: [io  0x0080]
[    1.234868] pnp 00:08: [io  0x0084-0x0086]
[    1.234876] pnp 00:08: [io  0x0088]
[    1.234884] pnp 00:08: [io  0x008c-0x008e]
[    1.234892] pnp 00:08: [io  0x0090-0x009f]
[    1.234900] pnp 00:08: [io  0x00a2-0x00bf]
[    1.234908] pnp 00:08: [io  0x00e0-0x00ef]
[    1.234916] pnp 00:08: [io  0x04d0-0x04d1]
[    1.234923] pnp 00:08: [io  0x0800-0x087f]
[    1.234932] pnp 00:08: [io  0x0000-0xffffffffffffffff disabled]
[    1.234940] pnp 00:08: [io  0x0480-0x04bf]
[    1.234948] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[    1.234955] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
[    1.235508] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    1.235589] system 00:08: [io  0x0800-0x087f] has been reserved
[    1.235680] system 00:08: [io  0x0480-0x04bf] has been reserved
[    1.235768] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.235851] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
[    1.235923] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.237601] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    1.238060] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.240371] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[    1.240380] pnp 00:0a: [mem 0xfff80000-0xffffffff]
[    1.240844] pnp 00:0a: Plug and Play ACPI device, IDs INT0800 (active)
[    1.242119] pnp 00:0b: [mem 0xffc00000-0xfff7ffff]
[    1.242638] system 00:0b: [mem 0xffc00000-0xfff7ffff] has been reserved
[    1.242711] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.245762] pnp 00:0c: [io  0x0060]
[    1.245770] pnp 00:0c: [io  0x0064]
[    1.245779] pnp 00:0c: [mem 0xfec00000-0xfec00fff]
[    1.245787] pnp 00:0c: [mem 0xfee00000-0xfee00fff]
[    1.246349] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
[    1.246433] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
[    1.246505] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.247745] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[    1.248300] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[    1.248373] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.253592] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[    1.253601] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[    1.253609] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[    1.253617] pnp 00:0e: [mem 0x00100000-0xcf6fffff]
[    1.253625] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.254193] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.254292] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[    1.254389] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[    1.254487] system 00:0e: [mem 0x00100000-0xcf6fffff] could not be reserved
[    1.254560] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.258307] pnp: PnP ACPI: found 15 devices
[    1.258368] ACPI: ACPI bus type pnp unregistered
[    1.306293] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    1.306368] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    1.306375] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf700000-0xcf8fffff 64bit pref]
[    1.306494] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    1.306559] pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
[    1.306628] pci 0000:00:1c.0:   bridge window [mem 0xfe200000-0xfe2fffff]
[    1.306697] pci 0000:00:1c.0:   bridge window [mem 0xcf700000-0xcf8fffff 64bit pref]
[    1.306853] pci 0000:02:02.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    1.306856] pci 0000:02:02.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    1.306859] pci 0000:02:02.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    1.306862] pci 0000:02:02.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    1.306867] pci 0000:02:02.0: BAR 0: assigned [mem 0xf0000000-0xf0000fff]
[    1.306941] pci 0000:02:02.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
[    1.307069] pci 0000:02:02.0: BAR 16: can't assign mem (size 0x4000000)
[    1.307151] pci 0000:02:02.0: BAR 13: assigned [io  0xe000-0xe0ff]
[    1.307217] pci 0000:02:02.0: BAR 14: assigned [io  0xe400-0xe4ff]
[    1.307315] pci 0000:02:02.0: BAR 0: assigned [mem 0xf0000000-0xf0000fff]
[    1.307923] pci 0000:02:02.0: BAR 16: assigned [mem 0xf4000000-0xf7ffffff]
[    1.308015] pci 0000:02:02.0: BAR 15: can't assign mem pref (size 0x4000000)
[    1.308095] pci 0000:02:02.0: BAR 14: assigned [io  0xe000-0xe0ff]
[    1.308167] pci 0000:02:02.0: BAR 13: assigned [io  0xe400-0xe4ff]
[    1.308263] pci 0000:02:01.0: PCI bridge to [bus 03]
[    1.308330] pci 0000:02:01.0:   bridge window [mem 0xfe300000-0xfe3fffff]
[    1.308406] pci 0000:02:02.0: CardBus bridge to [bus 04-07]
[    1.308470] pci 0000:02:02.0:   bridge window [io  0xe400-0xe4ff]
[    1.308537] pci 0000:02:02.0:   bridge window [io  0xe000-0xe0ff]
[    1.308605] pci 0000:02:02.0:   bridge window [mem 0xf4000000-0xf7ffffff]
[    1.308675] pci 0000:00:1e.0: PCI bridge to [bus 02-04]
[    1.308740] pci 0000:00:1e.0:   bridge window [io  0xe000-0xefff]
[    1.308809] pci 0000:00:1e.0:   bridge window [mem 0xfe300000-0xfebfffff]
[    1.308878] pci 0000:00:1e.0:   bridge window [mem 0xfb000000-0xfcffffff 64bit pref]
[    1.309052] pci 0000:00:1e.0: setting latency timer to 64
[    1.309098] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.309101] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.309103] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.309106] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[    1.309108] pci_bus 0000:00: resource 8 [mem 0xcf700000-0xdfffffff]
[    1.309111] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[    1.309113] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.309116] pci_bus 0000:01: resource 1 [mem 0xfe200000-0xfe2fffff]
[    1.309118] pci_bus 0000:01: resource 2 [mem 0xcf700000-0xcf8fffff 64bit pref]
[    1.309121] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    1.309123] pci_bus 0000:02: resource 1 [mem 0xfe300000-0xfebfffff]
[    1.309126] pci_bus 0000:02: resource 2 [mem 0xfb000000-0xfcffffff 64bit pref]
[    1.309128] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7]
[    1.309130] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff]
[    1.309133] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[    1.309135] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000dffff]
[    1.309138] pci_bus 0000:02: resource 8 [mem 0xcf700000-0xdfffffff]
[    1.309140] pci_bus 0000:02: resource 9 [mem 0xf0000000-0xffffffff]
[    1.309143] pci_bus 0000:03: resource 1 [mem 0xfe300000-0xfe3fffff]
[    1.309145] pci_bus 0000:04: resource 0 [io  0xe400-0xe4ff]
[    1.309148] pci_bus 0000:04: resource 1 [io  0xe000-0xe0ff]
[    1.309150] pci_bus 0000:04: resource 3 [mem 0xf4000000-0xf7ffffff]
[    1.309387] NET: Registered protocol family 2
[    1.310479] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    1.312052] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
[    1.317894] TCP: Hash tables configured (established 262144 bind 65536)
[    1.318180] TCP: reno registered
[    1.318314] UDP hash table entries: 2048 (order: 6, 327680 bytes)
[    1.318811] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes)
[    1.319752] NET: Registered protocol family 1
[    1.319877] pci 0000:00:02.0: Boot video device
[    1.319945] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[    1.319948] pci 0000:00:1d.0: Performing full reset
[    1.319975] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
[    1.319977] pci 0000:00:1d.1: Performing full reset
[    1.320047] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
[    1.320049] pci 0000:00:1d.2: Performing full reset
[    1.320075] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0030
[    1.320077] pci 0000:00:1d.3: Performing full reset
[    1.320230] PCI: CLS 32 bytes, default 64
[    1.320754] Unpacking initramfs...
[    1.471449] debug: unmapping init [mem 0xffff8800375f0000-0xffff880037aeffff]
[    1.471682] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.471755] software IO TLB [mem 0xcad1a000-0xced19fff] (64MB) mapped at [ffff8800cad1a000-ffff8800ced19fff]
[    1.479131] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0xb6
[    1.479234] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0xb6
[    1.479336] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0xb6
[    1.479442] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0xb6
[    1.480040] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    1.480333] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[    1.482518] audit: initializing netlink socket (disabled)
[    1.482663] type=2000 audit(1254540657.481:1): initialized
[    1.485415] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.557068] fuse init (API version 7.20)
[    1.558648] msgmni has been set to 7832
[    1.562067] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.562188] io scheduler noop registered
[    1.563222] io scheduler cfq registered (default)
[    1.564478] list_sort_test: start testing list_sort()
[    1.572863] intel_idle: does not run on family 6 model 15
[    1.573727] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[    1.573897] ACPI: Power Button [PWRB]
[    1.574686] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.574805] ACPI: Power Button [PWRF]
[    1.576921] ACPI: Requesting acpi_cpufreq
[    1.896649] thermal LNXTHERM:00: registered as thermal_zone0
[    1.896717] ACPI: Thermal Zone [THRM] (30 C)
[    1.897633] GHES: HEST is not enabled!
[    1.898255] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.919132] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    1.925216] Linux agpgart interface v0.103
[    1.926237] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[    1.926491] agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
[    1.927535] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.928422] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.929165] [drm] Initialized drm 1.1.0 20060810
[    1.934678] i915 0000:00:02.0: setting latency timer to 64
[    1.980943] i915 0000:00:02.0: irq 40 for MSI/MSI-X
[    1.981095] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.981164] [drm] Driver supports precise vblank timestamp query.
[    1.981596] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.072707] [drm] initialized overlay support
[    2.174099] fbcon: inteldrmfb (fb0) is primary device
[    2.224349] [drm] Setting output timings on SDVOB failed
[    2.238067] [drm] Setting input timings on SDVOB failed
[    2.314668] Console: switching to colour frame buffer device 240x67
[    2.320601] fb0: inteldrmfb frame buffer device
[    2.320624] drm: registered panic notifier
[    2.320747] i915: No ACPI video bus found
[    2.321182] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    2.334316] loop: module loaded
[    2.336851] ata_piix 0000:00:1f.1: version 2.13
[    2.337075] ata_piix 0000:00:1f.1: setting latency timer to 64
[    2.343937] scsi0 : ata_piix
[    2.386267] scsi1 : ata_piix
[    2.426170] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[    2.426207] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[    2.426375] ata_piix 0000:00:1f.2: MAP [
[    2.426406]  P0 P2 P1 P3 ]
[    2.426595] ata_piix 0000:00:1f.2: setting latency timer to 64
[    2.432540] scsi2 : ata_piix
[    2.473148] tsc: Refined TSC clocksource calibration: 2393.999 MHz
[    2.473231] Switching to clocksource tsc
[    2.482410] scsi3 : ata_piix
[    2.530796] ata3: SATA max UDMA/133 cmd 0xc080 ctl 0xc000 bmdma 0xb800 irq 19
[    2.530834] ata4: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb808 irq 19
[    2.531572] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.531956] r8169 0000:01:00.0: irq 41 for MSI/MSI-X
[    2.533893] r8169 0000:01:00.0 eth0: RTL8101e at 0xffffc9000002e000, 00:1e:90:a5:f6:e2, XID 94200000 IRQ 41
[    2.534542] yenta_cardbus 0000:02:02.0: CardBus bridge found [0000:0000]
[    2.534598] yenta_cardbus 0000:02:02.0: CardBus bridge to [bus 04-07]
[    2.534632] yenta_cardbus 0000:02:02.0:   bridge window [io  0xe400-0xe4ff]
[    2.534670] yenta_cardbus 0000:02:02.0:   bridge window [io  0xe000-0xe0ff]
[    2.534709] yenta_cardbus 0000:02:02.0:   bridge window [mem 0xfb000000-0xfb3fffff pref]
[    2.534753] yenta_cardbus 0000:02:02.0:   bridge window [mem 0xf4000000-0xf7ffffff]
[    2.682366] ata4.01: NODEV after polling detection
[    2.686374] ata3.00: ATA-7: INTEL SSDSA2M080G2GN, 2CV102HD, max UDMA/133
[    2.686417] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.688544] ata4.00: ATAPI: TSSTcorpCD/DVDW SH-S183L, SB03, max UDMA/33
[    2.688586] ata4.00: applying bridge limits
[    2.688676] ata3.00: failed to get Identify Device Data, Emask 0x1
[    2.693566] ata3.00: failed to get Identify Device Data, Emask 0x1
[    2.693574] ata3.00: configured for UDMA/133
[    2.694669] scsi 2:0:0:0: Direct-Access     ATA      INTEL SSDSA2M080 2CV1 PQ: 0 ANSI: 5
[    2.697194] ata4.00: configured for UDMA/33
[    2.699814] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    2.700905] sd 2:0:0:0: [sda] Write Protect is off
[    2.700935] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.701063] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.701250] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.705348]  sda: sda1 sda2
[    2.707886] scsi 3:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S183L SB03 PQ: 0 ANSI: 5
[    2.710052] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.717450] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.719067] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.722655] sr 3:0:0:0: Attached scsi CD-ROM sr0
[    2.724222] sr 3:0:0:0: Attached scsi generic sg1 type 5
[    2.706157] ACPI: Invalid Power Resource to register!
[    2.730162] ACPI: Invalid Power Resource to register!<6>[    2.852978] yenta_cardbus 0000:02:02.0: ISA IRQ mask 0x0000, PCI irq 19
[    2.854526] yenta_cardbus 0000:02:02.0: Socket status: 30000820
[    2.856054] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[    2.857675] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge window: [io  0xe000-0xefff]
[    2.859220] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge window: [mem 0xfe300000-0xfebfffff]
[    2.860759] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfe300000-0xfebfffff:
[    2.862398]  excluding 0xfe300000-0xfe41ffff
[    2.864291] yenta_cardbus 0000:02:02.0: pcmcia: parent PCI bridge window: [mem 0xfb000000-0xfcffffff 64bit pref]
[    2.865867] pcmcia_socket pcmcia_socket0: cs: memory probe 0xfb000000-0xfcffffff:
[    2.867869]  excluding 0xfb000000-0xfcffffff
[    2.873741] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.875345] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96
[    2.875541] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    2.875546] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    2.877265] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.878850] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[    2.878855] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[    2.879013] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[    2.882911] ehci_hcd 0000:00:1d.7: debug port 1
[    2.884459] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    2.884462] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[    2.884652] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe177c00
[    2.886180] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[    2.892332] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.894379] usb usb1: default language 0x0409
[    2.894575] usb usb1: udev 1, busnum 1, minor = 0
[    2.894578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.896094] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.897582] usb usb1: Product: EHCI Host Controller
[    2.899086] usb usb1: Manufacturer: Linux 3.7.0-rc1-main ehci_hcd
[    2.900559] usb usb1: SerialNumber: 0000:00:1d.7
[    2.903293] usb usb1: usb_probe_device
[    2.903297] usb usb1: configuration #1 chosen from 1 choice
[    2.903515] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    2.904137] hub 1-0:1.0: usb_probe_interface
[    2.904140] hub 1-0:1.0: usb_probe_interface - got id
[    2.904149] hub 1-0:1.0: USB hub found
[    2.905771] hub 1-0:1.0: 8 ports detected
[    2.907256] hub 1-0:1.0: standalone hub
[    2.907259] hub 1-0:1.0: no power switching (usb 1.0)
[    2.907261] hub 1-0:1.0: individual port over-current protection
[    2.907265] hub 1-0:1.0: power on to power good time: 20ms
[    2.907477] hub 1-0:1.0: local power source is good
[    2.908784] hub 1-0:1.0: trying to enable port power on non-switchable hub
[    2.910129] uhci_hcd: USB Universal Host Controller Interface driver
[    2.912307] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.912312] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.913825] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.915355] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.916823] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[    2.916826] uhci_hcd 0000:00:1d.0: Performing full reset
[    2.916839] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[    2.916879] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c880
[    2.918709] usb usb2: default language 0x0409
[    2.918893] usb usb2: udev 1, busnum 2, minor = 128
[    2.918896] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    2.920394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.921882] usb usb2: Product: UHCI Host Controller
[    2.923382] usb usb2: Manufacturer: Linux 3.7.0-rc1-main uhci_hcd
[    2.924873] usb usb2: SerialNumber: 0000:00:1d.0
[    2.927378] usb usb2: usb_probe_device
[    2.927382] usb usb2: configuration #1 chosen from 1 choice
[    2.927474] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[    2.928013] hub 2-0:1.0: usb_probe_interface
[    2.928016] hub 2-0:1.0: usb_probe_interface - got id
[    2.928021] hub 2-0:1.0: USB hub found
[    2.929614] hub 2-0:1.0: 2 ports detected
[    2.931100] hub 2-0:1.0: standalone hub
[    2.931102] hub 2-0:1.0: no power switching (usb 1.0)
[    2.931104] hub 2-0:1.0: individual port over-current protection
[    2.931108] hub 2-0:1.0: power on to power good time: 2ms
[    2.931233] hub 2-0:1.0: local power source is good
[    2.931598] hub 2-0:1.0: trying to enable port power on non-switchable hub
[    2.932247] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[    2.932336] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    2.932341] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.933878] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.935404] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.936862] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[    2.936865] uhci_hcd 0000:00:1d.1: Performing full reset
[    2.936878] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[    2.936918] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c800
[    2.938667] usb usb3: default language 0x0409
[    2.938851] usb usb3: udev 1, busnum 3, minor = 256
[    2.938854] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.940318] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.941772] usb usb3: Product: UHCI Host Controller
[    2.943248] usb usb3: Manufacturer: Linux 3.7.0-rc1-main uhci_hcd
[    2.944724] usb usb3: SerialNumber: 0000:00:1d.1
[    2.947264] usb usb3: usb_probe_device
[    2.947268] usb usb3: configuration #1 chosen from 1 choice
[    2.947390] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[    2.947914] hub 3-0:1.0: usb_probe_interface
[    2.947917] hub 3-0:1.0: usb_probe_interface - got id
[    2.947922] hub 3-0:1.0: USB hub found
[    2.949496] hub 3-0:1.0: 2 ports detected
[    2.950985] hub 3-0:1.0: standalone hub
[    2.950987] hub 3-0:1.0: no power switching (usb 1.0)
[    2.950989] hub 3-0:1.0: individual port over-current protection
[    2.950993] hub 3-0:1.0: power on to power good time: 2ms
[    2.951114] hub 3-0:1.0: local power source is good
[    2.951487] hub 3-0:1.0: trying to enable port power on non-switchable hub
[    2.952114] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[    2.952201] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    2.952205] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.953706] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.955323] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.956788] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[    2.956791] uhci_hcd 0000:00:1d.2: Performing full reset
[    2.956804] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[    2.956989] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[    2.958740] usb usb4: default language 0x0409
[    2.958921] usb usb4: udev 1, busnum 4, minor = 384
[    2.958925] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.960384] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.961818] usb usb4: Product: UHCI Host Controller
[    2.963254] usb usb4: Manufacturer: Linux 3.7.0-rc1-main uhci_hcd
[    2.964689] usb usb4: SerialNumber: 0000:00:1d.2
[    2.967140] usb usb4: usb_probe_device
[    2.967143] usb usb4: configuration #1 chosen from 1 choice
[    2.967250] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[    2.967788] hub 4-0:1.0: usb_probe_interface
[    2.967791] hub 4-0:1.0: usb_probe_interface - got id
[    2.967796] hub 4-0:1.0: USB hub found
[    2.969340] hub 4-0:1.0: 2 ports detected
[    2.970740] hub 4-0:1.0: standalone hub
[    2.970743] hub 4-0:1.0: no power switching (usb 1.0)
[    2.970745] hub 4-0:1.0: individual port over-current protection
[    2.970749] hub 4-0:1.0: power on to power good time: 2ms
[    2.970863] hub 4-0:1.0: local power source is good
[    2.971211] hub 4-0:1.0: trying to enable port power on non-switchable hub
[    2.971802] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[    2.971883] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    2.971887] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.973314] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.974705] uhci_hcd 0000:00:1d.3: detected 2 ports
[    2.976070] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[    2.976073] uhci_hcd 0000:00:1d.3: Performing full reset
[    2.976086] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
[    2.976271] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c400
[    2.977916] usb usb5: default language 0x0409
[    2.978110] usb usb5: udev 1, busnum 5, minor = 512
[    2.978113] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    2.979466] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.980820] usb usb5: Product: UHCI Host Controller
[    2.982165] usb usb5: Manufacturer: Linux 3.7.0-rc1-main uhci_hcd
[    2.983492] usb usb5: SerialNumber: 0000:00:1d.3
[    2.985829] usb usb5: usb_probe_device
[    2.985833] usb usb5: configuration #1 chosen from 1 choice
[    2.985950] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[    2.986494] hub 5-0:1.0: usb_probe_interface
[    2.986497] hub 5-0:1.0: usb_probe_interface - got id
[    2.986502] hub 5-0:1.0: USB hub found
[    2.987909] hub 5-0:1.0: 2 ports detected
[    2.989229] hub 5-0:1.0: standalone hub
[    2.989231] hub 5-0:1.0: no power switching (usb 1.0)
[    2.989233] hub 5-0:1.0: individual port over-current protection
[    2.989237] hub 5-0:1.0: power on to power good time: 2ms
[    2.989350] hub 5-0:1.0: local power source is good
[    2.989698] hub 5-0:1.0: trying to enable port power on non-switchable hub
[    2.990433] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[    2.991286] usbcore: registered new interface driver cdc_acm
[    2.992570] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.994142] usbcore: registered new interface driver uas
[    2.995420] Initializing USB Mass Storage driver...
[    2.997048] usbcore: registered new interface driver usb-storage
[    2.998327] USB Mass Storage support registered.
[    3.000812] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    3.003198] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.004604] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.007350] mousedev: PS/2 mouse device common for all mice
[    3.009221] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 001403 0  ACK POWER sig=k CSC CONNECT
[    3.009241] hub 1-0:1.0: port 2: status 0501 change 0001
[    3.009329] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 001803 0  ACK POWER sig=j CSC CONNECT
[    3.009347] hub 1-0:1.0: port 3: status 0501 change 0001
[    3.009395] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 001803 0  ACK POWER sig=j CSC CONNECT
[    3.009413] hub 1-0:1.0: port 4: status 0501 change 0001
[    3.010878] rtc_cmos 00:03: RTC can wake from S4
[    3.013325] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.014679] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    3.016425] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    3.020162] coretemp coretemp.0: Using relative temperature scale!
[    3.021533] coretemp coretemp.0: Using relative temperature scale!
[    3.022882] coretemp coretemp.0: Using relative temperature scale!
[    3.024195] coretemp coretemp.0: Using relative temperature scale!
[    3.025516] it87: Found IT8718F chip at 0xa10, revision 4
[    3.026758] it87: VID is disabled (pins used for GPIO)
[    3.030667] it87_wdt: Chip IT8718 revision 4 initialized. timeout=60 sec (nowayout=0 testmode=0 exclusive=1 nogameport=0)
[    3.031537] uhci_hcd 0000:00:1d.0: port 2 portsc 008a,00
[    3.032033] cpuidle: using governor ladder
[    3.033319] cpuidle: using governor menu
[    3.042697] usbcore: registered new interface driver usbhid
[    3.043992] usbhid: USB HID core driver
[    3.047461] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    3.051532] uhci_hcd 0000:00:1d.1: port 1 portsc 008a,00
[    3.051623] uhci_hcd 0000:00:1d.1: port 2 portsc 0082,00
[    3.071912] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    3.075651] TCP: cubic registered
[    3.076933] Initializing XFRM netlink socket
[    3.078282] NET: Registered protocol family 17
[    3.084047] registered taskstats version 1
[    3.087762] rtc_cmos 00:03: setting system clock to 2009-10-03 03:31:00 UTC (1254540660)
[    3.089125] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    3.109136] hub 1-0:1.0: state 7 ports 8 chg 001c evt 0000
[    3.109189] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[    3.109294] ehci_hcd 0000:00:1d.7: port 2 low speed --> companion
[    3.124847] ALSA device list:
[    3.126142]   #0: HDA Intel at 0xfe178000 irq 42
[    3.127988] debug: unmapping init [mem 0xffffffff81a98000-0xffffffff81b22fff]
[    3.129338] Write protecting the kernel read-only data: 10240k
[    3.130833] Testing CPA: undo ffffffff81000000-ffffffff81a00000
[    3.132319] Testing CPA: again
[    3.133771] debug: unmapping init [mem 0xffff8800015e1000-0xffff8800015fffff]
[    3.135126] debug: unmapping init [mem 0xffff880001896000-0xffff8800019fffff]
[    3.160062] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    3.160290] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
[    3.211330] ehci_hcd 0000:00:1d.7: port 3 full speed --> companion
[    3.211338] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003801 0  ACK POWER OWNER sig=j CONNECT
[    3.211360] hub 1-0:1.0: port 3 not reset yet, waiting 50ms
[    3.262080] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    3.262248] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
[    3.278592] dracut: dracut-018-60.git20120927.fc16
[    3.313207] ehci_hcd 0000:00:1d.7: port 4 full speed --> companion
[    3.313214] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 003801 0  ACK POWER OWNER sig=j CONNECT
[    3.313237] hub 1-0:1.0: port 4 not reset yet, waiting 50ms
[    3.333927] udevd[935]: starting version 173
[    3.365074] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    3.365219] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 001c
[    3.365239] ehci_hcd 0000:00:1d.7: GetStatus port:2 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    3.365286] hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s
[    3.470317] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100
[    3.470344] ehci_hcd 0000:00:1d.7: GetStatus port:3 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    3.470393] hub 1-0:1.0: port 3, status 0100, change 0001, 12 Mb/s
[    3.508932] dracut: Starting plymouth daemon
[    3.575079] hub 1-0:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
[    3.575102] ehci_hcd 0000:00:1d.7: GetStatus port:4 status 003002 0  ACK POWER OWNER sig=se0 CSC
[    3.575150] hub 1-0:1.0: port 4, status 0100, change 0001, 12 Mb/s
[    3.680061] hub 1-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100
[    3.680074] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004
[    3.680099] uhci_hcd 0000:00:1d.0: port 2 portsc 01a3,00
[    3.680152] hub 2-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[    3.745035] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[    3.746512] pci 0000:04:00.0: [168c:0013] type 00 class 0x028000
[    3.746548] pci 0000:04:00.0: reg 10: [mem 0x00000000-0x0000ffff]
[    3.746737] pci 0000:04:00.0: BAR 0: assigned [mem 0xf4000000-0xf400ffff]
[    3.784081] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[    3.886080] usb 2-2: new low-speed USB device number 2 using uhci_hcd
[    4.003303] ata_id (1514) used greatest stack depth: 4336 bytes left
[    4.023974] ata_id (1535) used greatest stack depth: 3680 bytes left
[    4.033565] usb 2-2: skipped 1 descriptor after interface
[    4.033577] usb 2-2: skipped 1 descriptor after interface
[    4.038548] usb 2-2: default language 0x0409
[    4.055566] usb 2-2: udev 2, busnum 2, minor = 129
[    4.055571] usb 2-2: New USB device found, idVendor=046d, idProduct=c312
[    4.057321] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.058889] usb 2-2: Product: USB Multimedia Keyboard
[    4.060467] usb 2-2: Manufacturer: BTC
[    4.067513] usb 2-2: usb_probe_device
[    4.067519] usb 2-2: configuration #1 chosen from 1 choice
[    4.070722] usb 2-2: adding 2-2:1.0 (config #1, interface 0)
[    4.074825] usbhid 2-2:1.0: usb_probe_interface
[    4.074830] usbhid 2-2:1.0: usb_probe_interface - got id
[    4.096971] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input2
[    4.098881] uhci_hcd 0000:00:1d.0: reserve dev 2 ep81-INT, period 8, phase 4, 118 us
[    4.103297] hid-generic 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input0
[    4.105331] usb 2-2: adding 2-2:1.1 (config #1, interface 1)
[    4.109661] usbhid 2-2:1.1: usb_probe_interface
[    4.109666] usbhid 2-2:1.1: usb_probe_interface - got id
[    4.154661] input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.1/input/input3
[    4.154724] uhci_hcd 0000:00:1d.0: reserve dev 2 ep82-INT, period 8, phase 4, 118 us
[    4.156057] usbhid 2-2:1.1: looking for a minor, starting at 0
[    4.157984] hid-generic 0003:046D:C312.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:1d.0-2/input1
[    4.158484] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0006
[    4.158509] uhci_hcd 0000:00:1d.1: port 1 portsc 0093,00
[    4.158558] hub 3-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
[    4.204034] usb usb4: suspend_rh (auto-stop)
[    4.204062] usb usb5: suspend_rh (auto-stop)
[    4.263069] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
[    4.264520] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.337850] dracut: Checking ext4: /dev/disk/by-uuid/69ea49b8-e1c0-494e-a5b2-3e0f4850decf
[    4.339702] dracut: issuing e2fsck -a  /dev/disk/by-uuid/69ea49b8-e1c0-494e-a5b2-3e0f4850decf
[    4.358998] dracut: /dev/disk/by-uuid/69ea49b8-e1c0-494e-a5b2-3e0f4850decf: clean, 1698284/4505600 files, 10113788/18001664 blocks
[    4.362277] dracut: Remounting /dev/disk/by-uuid/69ea49b8-e1c0-494e-a5b2-3e0f4850decf with -o ro
[    4.365077] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    4.413930] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    4.431801] dracut: Mounted root filesystem /dev/sda1
[    4.479287] readlink (1698) used greatest stack depth: 3216 bytes left
[    4.487137] usb 3-1: ep0 maxpacket = 8
[    4.519559] usb 3-1: skipped 1 descriptor after interface
[    4.519571] usb 3-1: skipped 1 descriptor after interface
[    4.519581] usb 3-1: skipped 1 descriptor after interface
[    4.524533] usb 3-1: default language 0x0409
[    4.539549] usb 3-1: udev 2, busnum 3, minor = 257
[    4.539554] usb 3-1: New USB device found, idVendor=046d, idProduct=c52b
[    4.541528] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.543338] usb 3-1: Product: USB Receiver
[    4.545101] usb 3-1: Manufacturer: Logitech
[    4.546147] dracut: Switching root
[    4.549364] usb 3-1: usb_probe_device
[    4.549368] usb 3-1: configuration #1 chosen from 1 choice
[    4.554558] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[    4.555174] usbhid 3-1:1.0: usb_probe_interface
[    4.555178] usbhid 3-1:1.0: usb_probe_interface - got id
[    4.558018] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
[    4.558494] usbhid 3-1:1.1: usb_probe_interface
[    4.558497] usbhid 3-1:1.1: usb_probe_interface - got id
[    4.562827] usb 3-1: adding 3-1:1.2 (config #1, interface 2)
[    4.563571] usbhid 3-1:1.2: usb_probe_interface
[    4.563574] usbhid 3-1:1.2: usb_probe_interface - got id
[    4.573730] usbhid 3-1:1.2: looking for a minor, starting at 0
[    4.575717] logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.1-1/input2
[    4.578588] uhci_hcd 0000:00:1d.1: reserve dev 2 ep83-INT, period 2, phase 1, 36 us
[    4.580028] uhci_hcd 0000:00:1d.1: port 2 portsc 0093,00
[    4.580079] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s
[    4.583140] input: Logitech Unifying Device. Wireless PID:101b as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.2/0003:046D:C52B.0005/input/input4
[    4.587588] logitech-djdevice 0003:046D:C52B.0006: input,hidraw3: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:101b] on usb-0000:00:1d.1-1:1
[    4.677344] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
[    4.684100] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101
[    4.718628] systemd[1]: /sbin/modprobe failed with error code 1.
[    4.723497] systemd[1]: Set hostname to <mj>.
[    4.787070] usb 3-2: new full-speed USB device number 3 using uhci_hcd
[    5.052378] systemd-readahead-replay[1727]: Bumped block_nr parameter of 259:0 to 16384. This is a temporary hack and should be removed one day.
[    5.095632] mount (1730) used greatest stack depth: 2848 bytes left
[    5.178402] udevd[1738]: starting version 173
[    5.344772] EXT4-fs (sda1): re-mounted. Opts: (null)
[    5.803553] mtp-probe[2132]: checking bus 2, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2"
[    5.841199] mtp-probe[2132]: bus: 2, device: 2 was not an MTP device
[    5.899587] cfg80211: Calling CRDA to update world regulatory domain
[    5.909663] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[    5.912136]  excluding 0xc0000-0xcffff 0xe0000-0xfffff
[    5.936835] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[    5.939735]  excluding 0xa0000000-0xa0ffffff
[    5.949460] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[    5.959422]  excluding 0x60000000-0x60ffffff
[    6.088750] cfg80211: World regulatory domain updated:
[    6.090386] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    6.092140] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.093669] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.095420] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.096974] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.098695] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.102234] ath5k 0000:03:08.0: registered as 'phy0'
[    6.348558] usb 3-2: skipped 7 descriptors after interface
[    6.348564] usb 3-2: skipped 2 descriptors after interface
[    6.348573] usb 3-2: skipped 1 descriptor after endpoint
[    6.348576] usb 3-2: skipped 2 descriptors after interface
[    6.348585] usb 3-2: skipped 1 descriptor after endpoint
[    6.348588] usb 3-2: skipped 1 descriptor after interface
[    6.353924] usb 3-2: default language 0x0409
[    6.362594] usb 3-2: udev 3, busnum 3, minor = 258
[    6.362599] usb 3-2: New USB device found, idVendor=046d, idProduct=0a1f
[    6.364285] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.365697] usb 3-2: Product: Logitech G930 Headset
[    6.367149] usb 3-2: Manufacturer: Logitech
[    6.372766] usb 3-2: usb_probe_device
[    6.372772] usb 3-2: configuration #1 chosen from 1 choice
[    6.375603] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
[    6.379314] usb 3-2: adding 3-2:1.1 (config #1, interface 1)
[    6.380862] usb 3-2: adding 3-2:1.2 (config #1, interface 2)
[    6.381929] usb 3-2: adding 3-2:1.3 (config #1, interface 3)
[    6.387937] usbhid 3-2:1.3: usb_probe_interface
[    6.387942] usbhid 3-2:1.3: usb_probe_interface - got id
[    6.402143] input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.3/input/input5
[    6.403613] uhci_hcd 0000:00:1d.1: reserve dev 3 ep83-INT, period 8, phase 4, 17 us
[    6.404780] usbhid 3-2:1.3: looking for a minor, starting at 0
[    6.406773] hid-generic 0003:046D:0A1F.0007: input,hiddev0,hidraw4: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:1d.1-2/input3
[    6.408620] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[    6.435798] mtp-probe[2513]: checking bus 3, device 2: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1"
[    6.439780] mtp-probe[2514]: checking bus 3, device 3: "/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2"
[    6.443243] mtp-probe[2514]: bus: 3, device: 3 was not an MTP device
[    6.468527] mtp-probe[2513]: bus: 3, device: 2 was not an MTP device
[    6.490511] Adding 6142972k swap on /dev/sda2.  Priority:0 extents:1 across:6142972k SS
[    6.523270] snd-usb-audio 3-2:1.0: usb_probe_interface
[    6.523278] snd-usb-audio 3-2:1.0: usb_probe_interface - got id
[    6.552429] usbcore: registered new interface driver snd-usb-audio
[    6.763753] ath: EEPROM regdomain: 0x0
[    6.763757] ath: EEPROM indicates default country code should be used
[    6.763760] ath: doing EEPROM country->regdmn map search
[    6.763764] ath: country maps to regdmn code: 0x3a
[    6.763766] ath: Country alpha2 being used: US
[    6.763769] ath: Regpair used: 0x3a
[    6.763817] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    6.763820] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763822] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    6.763827] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763829] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    6.763831] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763833] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    6.763836] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763838] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    6.763840] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763842] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    6.763844] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763846] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    6.763848] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763850] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    6.763853] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763855] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    6.763857] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763859] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    6.763861] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763863] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    6.763865] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    6.763867] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763869] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763871] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763873] cfg80211: Disabling freq 5040 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763875] cfg80211: Disabling freq 5060 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763877] cfg80211: Disabling freq 5080 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763879] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    6.763881] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763883] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    6.763885] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763887] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    6.763890] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763891] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    6.763894] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763896] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    6.763898] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763900] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    6.763902] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763904] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    6.763906] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763908] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    6.763911] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763913] cfg80211: Disabling freq 5500 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763914] cfg80211: Disabling freq 5520 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763916] cfg80211: Disabling freq 5540 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763918] cfg80211: Disabling freq 5560 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763920] cfg80211: Disabling freq 5580 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763922] cfg80211: Disabling freq 5600 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763924] cfg80211: Disabling freq 5620 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763926] cfg80211: Disabling freq 5640 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763928] cfg80211: Disabling freq 5660 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763929] cfg80211: Disabling freq 5680 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763931] cfg80211: Disabling freq 5700 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    6.763933] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    6.763936] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763938] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    6.763940] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763942] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    6.763944] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763946] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    6.763948] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.763950] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    6.763953] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    6.765948] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    6.765952] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765954] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    6.765957] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765959] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    6.765961] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765963] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    6.765966] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765968] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    6.765970] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765973] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    6.765975] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765977] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    6.765980] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765982] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    6.765984] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765986] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    6.765989] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765991] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    6.765993] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.765995] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    6.765998] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.766000] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[    6.766002] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.766005] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[    6.766027] cfg80211: 2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.766030] cfg80211: Updating information on frequency 2484 MHz for a 20 MHz width channel with regulatory rule:
[    6.766032] cfg80211: 2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    6.766034] cfg80211: Disabling freq 5040 MHz
[    6.766036] cfg80211: Disabling freq 5060 MHz
[    6.766038] cfg80211: Disabling freq 5080 MHz
[    6.766041] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    6.766043] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.766045] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    6.766048] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.766050] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    6.766052] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.766055] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    6.766057] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.766061] cfg80211: Disabling freq 5260 MHz
[    6.766063] cfg80211: Disabling freq 5280 MHz
[    6.766065] cfg80211: Disabling freq 5300 MHz
[    6.766067] cfg80211: Disabling freq 5320 MHz
[    6.766069] cfg80211: Disabling freq 5500 MHz
[    6.766070] cfg80211: Disabling freq 5520 MHz
[    6.766072] cfg80211: Disabling freq 5540 MHz
[    6.766074] cfg80211: Disabling freq 5560 MHz
[    6.766076] cfg80211: Disabling freq 5580 MHz
[    6.766077] cfg80211: Disabling freq 5600 MHz
[    6.766079] cfg80211: Disabling freq 5620 MHz
[    6.766081] cfg80211: Disabling freq 5640 MHz
[    6.766083] cfg80211: Disabling freq 5660 MHz
[    6.766084] cfg80211: Disabling freq 5680 MHz
[    6.766086] cfg80211: Disabling freq 5700 MHz
[    6.766088] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    6.766091] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.766093] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    6.766095] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.766097] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    6.766100] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.766102] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    6.766104] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.766107] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    6.766109] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.770791] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.778210] cfg80211: Calling CRDA for country: US
[    6.780136] ath5k: phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
[    6.781784] ath5k: phy0: RF5112B multiband radio found (0x36)
[    6.784826] ath5k 0000:03:09.0: registered as 'phy1'
[    6.796812] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    6.796816] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796819] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    6.796821] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796823] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    6.796826] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796828] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    6.796831] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796833] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    6.796835] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796837] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    6.796839] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796842] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    6.796844] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796846] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    6.796848] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796851] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    6.796853] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796855] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    6.796857] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796859] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    6.796862] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.796864] cfg80211: Disabling freq 2467 MHz
[    6.796866] cfg80211: Disabling freq 2472 MHz
[    6.796867] cfg80211: Disabling freq 2484 MHz
[    6.796869] cfg80211: Disabling freq 5040 MHz
[    6.796871] cfg80211: Disabling freq 5060 MHz
[    6.796873] cfg80211: Disabling freq 5080 MHz
[    6.796875] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    6.796877] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    6.796879] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    6.796881] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    6.796884] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    6.796886] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    6.796888] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    6.796890] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    6.796893] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    6.796895] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796897] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    6.796899] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796902] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    6.796904] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796906] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    6.796909] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796911] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    6.796913] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796915] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    6.796918] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796920] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    6.796922] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796925] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    6.796927] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796929] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    6.796932] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796934] cfg80211: Disabling freq 5600 MHz
[    6.796935] cfg80211: Disabling freq 5620 MHz
[    6.796937] cfg80211: Disabling freq 5640 MHz
[    6.796939] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    6.796942] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796944] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    6.796946] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796949] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    6.796951] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.796953] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    6.796956] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    6.796958] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    6.796960] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    6.796963] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    6.796965] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    6.796967] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    6.796970] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    6.796972] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    6.796974] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    6.796982] cfg80211: Regulatory domain changed to country: US
[    6.798500] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    6.800033] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    6.801565] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    6.803081] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.804615] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.806123] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    6.807614] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.279105] ath: EEPROM regdomain: 0x0
[    7.279109] ath: EEPROM indicates default country code should be used
[    7.279111] ath: doing EEPROM country->regdmn map search
[    7.279115] ath: country maps to regdmn code: 0x3a
[    7.279117] ath: Country alpha2 being used: US
[    7.279119] ath: Regpair used: 0x3a
[    7.279126] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    7.279130] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279133] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    7.279136] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279139] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    7.279143] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279146] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    7.279149] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279152] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    7.279155] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279158] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    7.279162] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279164] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    7.279168] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279171] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    7.279174] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279177] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    7.279180] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279183] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    7.279187] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279190] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    7.279193] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.279196] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279199] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279202] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279204] cfg80211: Disabling freq 5040 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279207] cfg80211: Disabling freq 5060 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279210] cfg80211: Disabling freq 5080 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279213] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    7.279216] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279219] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    7.279223] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279226] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    7.279229] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279232] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    7.279235] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279238] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    7.279242] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279244] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    7.279248] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279251] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    7.279254] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279257] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    7.279261] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279264] cfg80211: Disabling freq 5500 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279266] cfg80211: Disabling freq 5520 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279269] cfg80211: Disabling freq 5540 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279272] cfg80211: Disabling freq 5560 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279275] cfg80211: Disabling freq 5580 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279278] cfg80211: Disabling freq 5600 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279280] cfg80211: Disabling freq 5620 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279283] cfg80211: Disabling freq 5640 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279286] cfg80211: Disabling freq 5660 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279289] cfg80211: Disabling freq 5680 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279291] cfg80211: Disabling freq 5700 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.279294] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    7.279298] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279301] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    7.279304] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279307] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    7.279311] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279314] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    7.279317] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.279325] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    7.279327] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.280305] cfg80211: Ignoring regulatory request Set by core since the driver requires its own regulatory domain to be set first
[    7.283418] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
[    7.289079] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    7.289082] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289085] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    7.289087] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289089] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    7.289092] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289094] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    7.289096] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289099] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    7.289101] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289103] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    7.289106] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289108] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    7.289110] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289112] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    7.289115] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289117] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    7.289120] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289122] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    7.289124] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289127] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    7.289129] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.289131] cfg80211: Disabling freq 2467 MHz
[    7.289133] cfg80211: Disabling freq 2472 MHz
[    7.289135] cfg80211: Disabling freq 2484 MHz
[    7.289137] cfg80211: Disabling freq 5040 MHz
[    7.289138] cfg80211: Disabling freq 5060 MHz
[    7.289140] cfg80211: Disabling freq 5080 MHz
[    7.289142] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    7.289145] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.289147] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    7.289149] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.289152] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    7.289154] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.289156] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    7.289159] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.289161] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    7.289163] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289166] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    7.289168] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289170] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    7.289172] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289175] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    7.289177] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289179] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    7.289182] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289184] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    7.289186] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289189] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    7.289191] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289193] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    7.289196] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289198] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    7.289200] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289202] cfg80211: Disabling freq 5600 MHz
[    7.289204] cfg80211: Disabling freq 5620 MHz
[    7.289206] cfg80211: Disabling freq 5640 MHz
[    7.289208] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    7.289210] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289213] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    7.289215] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289217] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    7.289220] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.289222] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    7.289224] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.289227] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    7.289229] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.289231] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    7.289234] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.289236] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    7.289238] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.289240] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    7.289243] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.289451] ath5k: phy1: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
[    7.290952] ath5k: phy1: RF5112B multiband radio found (0x36)
[    7.293400] ath5k 0000:03:0b.0: registered as 'phy2'
[    7.785830] ath: EEPROM regdomain: 0x0
[    7.785833] ath: EEPROM indicates default country code should be used
[    7.785834] ath: doing EEPROM country->regdmn map search
[    7.785836] ath: country maps to regdmn code: 0x3a
[    7.785838] ath: Country alpha2 being used: US
[    7.785840] ath: Regpair used: 0x3a
[    7.785844] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    7.785846] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785848] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    7.785851] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785853] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    7.785855] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785857] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    7.785859] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785861] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    7.785863] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785865] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    7.785868] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785870] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    7.785872] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785874] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    7.785876] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785878] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    7.785881] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785883] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    7.785885] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785887] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    7.785889] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    7.785891] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785893] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785895] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785897] cfg80211: Disabling freq 5040 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785899] cfg80211: Disabling freq 5060 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785901] cfg80211: Disabling freq 5080 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785903] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    7.785905] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785907] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    7.785909] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785911] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    7.785914] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785916] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    7.785918] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785920] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    7.785922] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785924] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    7.785926] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785928] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    7.785931] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785932] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    7.785935] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785937] cfg80211: Disabling freq 5500 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785939] cfg80211: Disabling freq 5520 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785940] cfg80211: Disabling freq 5540 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785942] cfg80211: Disabling freq 5560 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785944] cfg80211: Disabling freq 5580 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785946] cfg80211: Disabling freq 5600 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785948] cfg80211: Disabling freq 5620 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785950] cfg80211: Disabling freq 5640 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785952] cfg80211: Disabling freq 5660 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785953] cfg80211: Disabling freq 5680 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785955] cfg80211: Disabling freq 5700 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    7.785957] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    7.785959] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785961] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    7.785964] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785966] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    7.785968] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785970] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    7.785972] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.785974] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    7.785976] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    7.786932] cfg80211: Ignoring regulatory request Set by core since the driver requires its own regulatory domain to be set first
[    7.790142] ieee80211 phy2: Selected rate control algorithm 'minstrel_ht'
[    7.795888] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    7.795891] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795894] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    7.795896] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795899] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    7.795901] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795903] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    7.795905] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795908] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    7.795910] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795912] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    7.795915] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795917] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    7.795919] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795921] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    7.795923] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795926] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    7.795928] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795930] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    7.795933] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795935] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    7.795937] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    7.795939] cfg80211: Disabling freq 2467 MHz
[    7.795941] cfg80211: Disabling freq 2472 MHz
[    7.795943] cfg80211: Disabling freq 2484 MHz
[    7.795944] cfg80211: Disabling freq 5040 MHz
[    7.795946] cfg80211: Disabling freq 5060 MHz
[    7.795948] cfg80211: Disabling freq 5080 MHz
[    7.795950] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    7.795952] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.795955] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    7.795957] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.795959] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    7.795962] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.795964] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    7.795966] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    7.795968] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    7.795971] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.795973] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    7.795975] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.795978] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    7.795980] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.795982] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    7.795985] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.795987] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    7.795989] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.795991] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    7.795994] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.795996] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    7.795998] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.796001] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    7.796003] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.796005] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    7.796008] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.796019] cfg80211: Disabling freq 5600 MHz
[    7.796021] cfg80211: Disabling freq 5620 MHz
[    7.796022] cfg80211: Disabling freq 5640 MHz
[    7.796025] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    7.796027] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.796032] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    7.796035] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.796037] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    7.796040] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    7.796042] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    7.796045] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.796047] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    7.796049] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.796051] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    7.796054] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.796056] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    7.796058] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.796061] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    7.796063] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    7.796264] ath5k: phy2: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
[    7.797825] ath5k: phy2: RF5112B multiband radio found (0x36)
[    7.799820] ath5k 0000:04:00.0: enabling device (0000 -> 0002)
[    7.801717] ath5k 0000:04:00.0: registered as 'phy3'
[    8.270386] ath: EEPROM regdomain: 0x13
[    8.270389] ath: EEPROM indicates we should expect a direct regpair map
[    8.270393] ath: Country alpha2 being used: 00
[    8.270395] ath: Regpair used: 0x13
[    8.270406] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.270408] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270410] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.270413] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270415] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.270417] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270419] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.270421] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270423] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.270426] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270428] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.270430] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270432] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.270434] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270436] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.270439] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270441] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.270443] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270445] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.270447] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270449] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.270451] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A mBi, 2000 mBm)
[    8.270453] cfg80211: Disabling freq 2467 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270455] cfg80211: Disabling freq 2472 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270457] cfg80211: Disabling freq 2484 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270459] cfg80211: Disabling freq 5040 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270461] cfg80211: Disabling freq 5060 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270463] cfg80211: Disabling freq 5080 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270465] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    8.270467] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270469] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    8.270471] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270473] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    8.270476] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270478] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    8.270480] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270482] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    8.270484] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270486] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    8.270489] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270491] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    8.270493] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270495] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    8.270497] cfg80211: 5140000 KHz - 5360000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270499] cfg80211: Disabling freq 5500 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270501] cfg80211: Disabling freq 5520 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270503] cfg80211: Disabling freq 5540 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270505] cfg80211: Disabling freq 5560 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270507] cfg80211: Disabling freq 5580 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270508] cfg80211: Disabling freq 5600 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270510] cfg80211: Disabling freq 5620 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270512] cfg80211: Disabling freq 5640 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270514] cfg80211: Disabling freq 5660 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270516] cfg80211: Disabling freq 5680 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270518] cfg80211: Disabling freq 5700 MHz as custom regd has no rule that fits a 20 MHz wide channel
[    8.270520] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    8.270522] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270524] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    8.270526] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270528] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    8.270530] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270532] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    8.270535] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.270537] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    8.270539] cfg80211: 5715000 KHz - 5860000 KHz @ 40000 KHz), (N/A mBi, 3000 mBm)
[    8.271526] cfg80211: Ignoring regulatory request Set by core since the driver requires its own regulatory domain to be set first
[    8.274639] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht'
[    8.280624] cfg80211: Calling CRDA to update world regulatory domain
[    8.282397] ath5k: phy3: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
[    8.284057] ath5k: phy3: RF5112B multiband radio found (0x36)
[    8.300536] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.300541] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300543] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.300546] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300548] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.300551] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300553] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.300555] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300558] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.300560] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300562] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.300565] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300567] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.300569] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300572] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.300574] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300576] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.300579] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300581] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.300584] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300586] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.300588] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300590] cfg80211: Disabling freq 2467 MHz
[    8.300592] cfg80211: Disabling freq 2472 MHz
[    8.300594] cfg80211: Disabling freq 2484 MHz
[    8.300596] cfg80211: Disabling freq 5040 MHz
[    8.300598] cfg80211: Disabling freq 5060 MHz
[    8.300599] cfg80211: Disabling freq 5080 MHz
[    8.300601] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    8.300604] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300606] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    8.300609] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300611] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    8.300613] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300616] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    8.300618] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300620] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    8.300623] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300625] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    8.300627] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300630] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    8.300632] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300634] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    8.300637] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300639] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    8.300641] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300644] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    8.300646] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300648] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    8.300651] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300653] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    8.300656] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300658] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    8.300660] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300662] cfg80211: Disabling freq 5600 MHz
[    8.300664] cfg80211: Disabling freq 5620 MHz
[    8.300666] cfg80211: Disabling freq 5640 MHz
[    8.300668] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    8.300670] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300673] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    8.300675] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300677] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    8.300680] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300682] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    8.300684] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300687] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    8.300689] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300691] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    8.300694] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300696] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    8.300698] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300701] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    8.300703] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300712] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.300714] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300717] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.300719] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300721] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.300724] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300726] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.300728] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300731] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.300733] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300735] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.300738] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300740] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.300742] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300745] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.300747] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300749] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.300752] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300754] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.300757] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300759] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.300761] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300763] cfg80211: Disabling freq 2467 MHz
[    8.300765] cfg80211: Disabling freq 2472 MHz
[    8.300767] cfg80211: Disabling freq 2484 MHz
[    8.300769] cfg80211: Disabling freq 5040 MHz
[    8.300771] cfg80211: Disabling freq 5060 MHz
[    8.300772] cfg80211: Disabling freq 5080 MHz
[    8.300774] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    8.300777] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300779] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    8.300781] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300784] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    8.300786] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300788] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    8.300791] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300793] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    8.300795] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300798] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    8.300800] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300802] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    8.300805] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300807] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    8.300809] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300812] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    8.300814] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300816] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    8.300819] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300821] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    8.300823] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300826] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    8.300828] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300830] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    8.300832] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300835] cfg80211: Disabling freq 5600 MHz
[    8.300836] cfg80211: Disabling freq 5620 MHz
[    8.300838] cfg80211: Disabling freq 5640 MHz
[    8.300840] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    8.300843] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300845] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    8.300848] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300850] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    8.300852] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300855] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    8.300857] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300859] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    8.300862] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300864] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    8.300866] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300869] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    8.300871] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300873] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    8.300876] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.300884] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.300886] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300889] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.300891] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300893] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.300896] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300898] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.300900] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300902] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.300905] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300907] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.300909] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300912] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.300914] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300917] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.300919] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300921] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.300924] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300926] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.300928] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300931] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.300933] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.300935] cfg80211: Disabling freq 2467 MHz
[    8.300937] cfg80211: Disabling freq 2472 MHz
[    8.300939] cfg80211: Disabling freq 2484 MHz
[    8.300941] cfg80211: Disabling freq 5040 MHz
[    8.300942] cfg80211: Disabling freq 5060 MHz
[    8.300944] cfg80211: Disabling freq 5080 MHz
[    8.300946] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    8.300949] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300951] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    8.300953] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300956] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    8.300958] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300960] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    8.300963] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.300965] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    8.300967] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300970] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    8.300972] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300975] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    8.300977] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300979] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    8.300982] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300984] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    8.300986] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300988] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    8.300991] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300993] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    8.300995] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.300998] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    8.301012] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301015] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    8.301017] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301019] cfg80211: Disabling freq 5600 MHz
[    8.301021] cfg80211: Disabling freq 5620 MHz
[    8.301023] cfg80211: Disabling freq 5640 MHz
[    8.301025] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    8.301027] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301030] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    8.301032] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301034] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    8.301036] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301039] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    8.301041] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301043] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    8.301046] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301048] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    8.301050] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301053] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    8.301055] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301057] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    8.301060] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301067] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.301070] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301072] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.301074] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301076] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.301079] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301081] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.301083] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301086] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.301088] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301090] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.301093] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301095] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.301098] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301100] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.301102] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301104] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.301107] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301109] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.301111] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301114] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.301116] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.301118] cfg80211: Disabling freq 2467 MHz
[    8.301120] cfg80211: Disabling freq 2472 MHz
[    8.301121] cfg80211: Disabling freq 2484 MHz
[    8.301123] cfg80211: Disabling freq 5040 MHz
[    8.301125] cfg80211: Disabling freq 5060 MHz
[    8.301127] cfg80211: Disabling freq 5080 MHz
[    8.301129] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    8.301131] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.301134] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    8.301136] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.301138] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    8.301141] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.301143] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    8.301145] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.301147] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    8.301150] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301152] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    8.301154] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301157] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    8.301159] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301161] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    8.301164] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301166] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    8.301168] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301171] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    8.301173] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301175] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    8.301178] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301180] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    8.301182] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301184] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    8.301187] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301189] cfg80211: Disabling freq 5600 MHz
[    8.301191] cfg80211: Disabling freq 5620 MHz
[    8.301192] cfg80211: Disabling freq 5640 MHz
[    8.301195] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    8.301197] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301199] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    8.301202] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301204] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    8.301206] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.301209] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    8.301211] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301214] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    8.301216] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301218] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    8.301221] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301223] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    8.301225] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301228] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    8.301230] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.301236] cfg80211: World regulatory domain updated:
[    8.302994] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.304754] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.306534] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.308319] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[    8.310088] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.311831] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.365377] cfg80211: Calling CRDA for country: US
[    8.372990] cfg80211: Pending regulatory request, waiting for it to be processed...
[    8.390242] cfg80211: Pending regulatory request, waiting for it to be processed...
[    8.394645] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.394650] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394652] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.394655] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394657] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.394659] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394662] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.394664] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394666] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.394668] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394671] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.394673] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394675] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.394678] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394680] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.394682] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394684] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.394687] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394689] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.394691] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394693] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.394696] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394698] cfg80211: Disabling freq 2467 MHz
[    8.394700] cfg80211: Disabling freq 2472 MHz
[    8.394701] cfg80211: Disabling freq 2484 MHz
[    8.394703] cfg80211: Disabling freq 5040 MHz
[    8.394705] cfg80211: Disabling freq 5060 MHz
[    8.394707] cfg80211: Disabling freq 5080 MHz
[    8.394709] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    8.394711] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.394713] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    8.394716] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.394718] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    8.394720] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.394722] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    8.394725] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.394727] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    8.394729] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394731] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    8.394733] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394736] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    8.394738] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394740] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    8.394742] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394745] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    8.394747] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394749] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    8.394751] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394754] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    8.394756] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394758] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    8.394760] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394763] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    8.394765] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394767] cfg80211: Disabling freq 5600 MHz
[    8.394769] cfg80211: Disabling freq 5620 MHz
[    8.394770] cfg80211: Disabling freq 5640 MHz
[    8.394772] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    8.394775] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394777] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    8.394779] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394782] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    8.394784] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394786] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    8.394788] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394791] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    8.394793] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394795] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    8.394798] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394800] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    8.394802] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394804] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    8.394807] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394816] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.394818] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394820] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.394823] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394825] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.394827] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394829] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.394832] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394834] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.394836] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394838] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.394841] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394843] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.394845] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394847] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.394850] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394852] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.394855] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394857] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.394859] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394861] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.394864] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394866] cfg80211: Disabling freq 2467 MHz
[    8.394867] cfg80211: Disabling freq 2472 MHz
[    8.394869] cfg80211: Disabling freq 2484 MHz
[    8.394871] cfg80211: Disabling freq 5040 MHz
[    8.394872] cfg80211: Disabling freq 5060 MHz
[    8.394874] cfg80211: Disabling freq 5080 MHz
[    8.394876] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    8.394878] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.394880] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    8.394883] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.394885] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    8.394887] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.394889] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    8.394892] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.394894] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    8.394896] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394899] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    8.394901] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394903] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    8.394905] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394908] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    8.394910] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394912] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    8.394914] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394917] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    8.394919] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394921] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    8.394923] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394926] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    8.394928] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394930] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    8.394933] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394935] cfg80211: Disabling freq 5600 MHz
[    8.394936] cfg80211: Disabling freq 5620 MHz
[    8.394938] cfg80211: Disabling freq 5640 MHz
[    8.394940] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    8.394942] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394945] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    8.394947] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394949] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    8.394951] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.394954] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    8.394956] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394958] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    8.394960] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394963] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    8.394965] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394967] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    8.394969] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394972] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    8.394974] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.394981] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.394983] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394986] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.394988] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394990] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.394992] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.394995] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.394997] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395532] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.395534] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395537] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.395539] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395541] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.395544] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395546] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.395548] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395550] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.395552] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395554] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.395557] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395559] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.395561] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395563] cfg80211: Disabling freq 2467 MHz
[    8.395565] cfg80211: Disabling freq 2472 MHz
[    8.395567] cfg80211: Disabling freq 2484 MHz
[    8.395568] cfg80211: Disabling freq 5040 MHz
[    8.395570] cfg80211: Disabling freq 5060 MHz
[    8.395571] cfg80211: Disabling freq 5080 MHz
[    8.395574] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    8.395576] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.395578] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    8.395580] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.395582] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    8.395585] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.395587] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    8.395589] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.395591] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    8.395594] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395596] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    8.395598] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395600] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    8.395602] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395605] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    8.395607] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395609] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    8.395611] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395614] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    8.395616] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395618] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    8.395620] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395622] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    8.395625] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395627] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    8.395629] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395631] cfg80211: Disabling freq 5600 MHz
[    8.395633] cfg80211: Disabling freq 5620 MHz
[    8.395634] cfg80211: Disabling freq 5640 MHz
[    8.395636] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    8.395639] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395641] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    8.395643] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395645] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    8.395648] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395650] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    8.395652] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395654] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    8.395657] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395659] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    8.395661] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395663] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    8.395666] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395668] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    8.395670] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395677] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[    8.395679] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395682] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[    8.395684] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395686] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[    8.395688] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395690] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[    8.395693] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395695] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[    8.395697] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395699] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[    8.395702] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395704] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[    8.395706] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395708] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[    8.395710] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395713] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[    8.395715] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395717] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[    8.395719] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395721] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[    8.395724] cfg80211: 2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.395726] cfg80211: Disabling freq 2467 MHz
[    8.395727] cfg80211: Disabling freq 2472 MHz
[    8.395729] cfg80211: Disabling freq 2484 MHz
[    8.395731] cfg80211: Disabling freq 5040 MHz
[    8.395732] cfg80211: Disabling freq 5060 MHz
[    8.395734] cfg80211: Disabling freq 5080 MHz
[    8.395736] cfg80211: Updating information on frequency 5180 MHz for a 20 MHz width channel with regulatory rule:
[    8.395738] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.395740] cfg80211: Updating information on frequency 5200 MHz for a 20 MHz width channel with regulatory rule:
[    8.395743] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.395745] cfg80211: Updating information on frequency 5220 MHz for a 20 MHz width channel with regulatory rule:
[    8.395747] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.395749] cfg80211: Updating information on frequency 5240 MHz for a 20 MHz width channel with regulatory rule:
[    8.395752] cfg80211: 5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.395754] cfg80211: Updating information on frequency 5260 MHz for a 20 MHz width channel with regulatory rule:
[    8.395756] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395758] cfg80211: Updating information on frequency 5280 MHz for a 20 MHz width channel with regulatory rule:
[    8.395761] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395763] cfg80211: Updating information on frequency 5300 MHz for a 20 MHz width channel with regulatory rule:
[    8.395765] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395767] cfg80211: Updating information on frequency 5320 MHz for a 20 MHz width channel with regulatory rule:
[    8.395770] cfg80211: 5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395772] cfg80211: Updating information on frequency 5500 MHz for a 20 MHz width channel with regulatory rule:
[    8.395774] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395776] cfg80211: Updating information on frequency 5520 MHz for a 20 MHz width channel with regulatory rule:
[    8.395779] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395781] cfg80211: Updating information on frequency 5540 MHz for a 20 MHz width channel with regulatory rule:
[    8.395783] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395785] cfg80211: Updating information on frequency 5560 MHz for a 20 MHz width channel with regulatory rule:
[    8.395788] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395790] cfg80211: Updating information on frequency 5580 MHz for a 20 MHz width channel with regulatory rule:
[    8.395792] cfg80211: 5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395794] cfg80211: Disabling freq 5600 MHz
[    8.395796] cfg80211: Disabling freq 5620 MHz
[    8.395797] cfg80211: Disabling freq 5640 MHz
[    8.395799] cfg80211: Updating information on frequency 5660 MHz for a 20 MHz width channel with regulatory rule:
[    8.395802] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395804] cfg80211: Updating information on frequency 5680 MHz for a 20 MHz width channel with regulatory rule:
[    8.395806] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395808] cfg80211: Updating information on frequency 5700 MHz for a 20 MHz width channel with regulatory rule:
[    8.395811] cfg80211: 5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.395813] cfg80211: Updating information on frequency 5745 MHz for a 20 MHz width channel with regulatory rule:
[    8.395815] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395817] cfg80211: Updating information on frequency 5765 MHz for a 20 MHz width channel with regulatory rule:
[    8.395820] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395822] cfg80211: Updating information on frequency 5785 MHz for a 20 MHz width channel with regulatory rule:
[    8.395824] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395826] cfg80211: Updating information on frequency 5805 MHz for a 20 MHz width channel with regulatory rule:
[    8.395828] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395831] cfg80211: Updating information on frequency 5825 MHz for a 20 MHz width channel with regulatory rule:
[    8.395833] cfg80211: 5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.395839] cfg80211: Regulatory domain changed to country: US
[    8.397583] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    8.399216] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
[    8.400807] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
[    8.402414] cfg80211:   (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.403990] cfg80211:   (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.405567] cfg80211:   (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[    8.407126] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
[    8.619245] fedora-storage-init[2673]: Setting up Logical Volume Management:   /dev/mapper/control: open failed: No such device
[    8.621214] fedora-storage-init[2673]: Failure to communicate with kernel device-mapper driver.
[    8.622956] fedora-storage-init[2673]: Check that device-mapper is available in the kernel.
[    8.641097] fedora-storage-init[2673]: No volume groups found
[    8.643207] fedora-storage-init[2673]: [  OK  ]
[    8.722856] fedora-storage-init[2681]: Setting up Logical Volume Management:   /dev/mapper/control: open failed: No such device
[    8.724545] fedora-storage-init[2681]: Failure to communicate with kernel device-mapper driver.
[    8.726175] fedora-storage-init[2681]: Check that device-mapper is available in the kernel.
[    8.740727] fedora-storage-init[2681]: No volume groups found
[    8.742426] fedora-storage-init[2681]: [  OK  ]
[    8.785887] lvm[2689]: /dev/mapper/control: open failed: No such device
[    8.787878] lvm[2689]: Failure to communicate with kernel device-mapper driver.
[    8.789456] lvm[2689]: Check that device-mapper is available in the kernel.
[    8.804681] lvm[2689]: No volume groups found
[    9.094668] iptables.init[2704]: iptables: Applying firewall rules: FATAL: Module ip_tables not found.
[    9.096325] iptables.init[2704]: iptables-restore v1.4.12: iptables-restore: unable to initialize table 'filter'
[    9.098040] iptables.init[2704]: Error occurred at line: 3
[    9.099689] iptables.init[2704]: Try `iptables-restore -h' or 'iptables-restore --help' for more information.
[    9.104510] iptables.init[2704]: [FAILED]
[    9.111866] /usr/sbin/crond[2727]: (CRON) INFO (Syslog will be used instead of sendmail.): No such file or directory
[    9.114513] /usr/sbin/crond[2727]: (CRON) INFO (running with inotify support)
[    9.174587] acpid[2739]: starting up with netlink and the input layer
[    9.175182] acpid[2739]: skipping incomplete file /etc/acpi/events/videoconf
[    9.175322] acpid[2739]: 1 rule loaded
[    9.175586] acpid[2739]: waiting for events: event logging is off
[    9.213691] abrtd[2740]: Init complete, entering main loop
[    9.274609] /usr/sbin/gpm[2749]: *** info [daemon/startup.c(136)]:
[    9.276372] /usr/sbin/gpm[2749]: Started gpm successfully. Entered daemon mode.
[    9.351750] ntpd[2755]: ntpd 4.2.6p4@1.2324-o Thu Oct  6 15:37:57 UTC 2011 (1)
[    9.356472] ntpd[2755]: proto: precision = 0.078 usec
[    9.356627] ntpd[2755]: 0.0.0.0 c01d 0d kern kernel time sync enabled
[    9.357041] ntpd[2755]: ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
[    9.357713] ntpd[2755]: Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
[    9.358062] ntpd[2755]: Listen normally on 1 lo 127.0.0.1 UDP 123
[    9.358179] ntpd[2755]: peers refreshed
[    9.358314] ntpd[2755]: Listening on routing socket on fd #18 for interface updates
[    9.360341] ntpd[2755]: restrict: error in address '::' on line 10. Ignoring...
[    9.361300] ntpd[2755]: restrict: error in address '::1' on line 16. Ignoring...
[    9.363642] ntpd[2755]: Deferring DNS for 0.fedora.pool.ntp.org 1
[    9.364292] ntpd[2755]: Deferring DNS for 1.fedora.pool.ntp.org 1
[    9.364866] ntpd[2755]: Deferring DNS for 2.fedora.pool.ntp.org 1
[    9.365435] ntpd[2755]: Deferring DNS for 3.fedora.pool.ntp.org 1
[    9.366942] ntpd[2755]: 0.0.0.0 c016 06 restart
[    9.367057] ntpd[2755]: 0.0.0.0 c012 02 freq_set kernel 6.427 PPM
[    9.367282] ntpd[2761]: signal_no_reset: signal 17 had flags 4000000
[    9.440664] avahi-daemon[2763]: Found user 'avahi' (UID 70) and group 'avahi' (GID 70).
[    9.442307] avahi-daemon[2763]: Successfully dropped root privileges.
[    9.443888] avahi-daemon[2763]: avahi-daemon 0.6.30 starting up.
[    9.577053] tcsd[2764]: insmod: can't read '/lib/modules/3.7.0-rc1-main/kernel/drivers/char/tpm/tpm_*': No such file or directory
[    9.580122] systemd[1]: iptables.service: main process exited, code=exited, status=1
[    9.584823] tcsd[2777]: TCSD TDDL[2777]: TrouSerS ERROR: Could not find a device to open!
[    9.593458] tcsd[2764]: Starting tcsd: [FAILED]
[    9.595759] systemd[1]: Unit iptables.service entered failed state.
[    9.694559] systemd[1]: tcsd.service: control process exited, code=exited status=137
[    9.716901] systemd[1]: Unit tcsd.service entered failed state.
[    9.826090] dbus-daemon[2789]: dbus[2789]: [system] Activating systemd to hand-off: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
[    9.828863] dbus[2789]: [system] Activating systemd to hand-off: service name='org.freedesktop.NetworkManager' unit='dbus-org.freedesktop.NetworkManager.service'
[    9.838390] avahi-daemon[2763]: Successfully called chroot().
[    9.838428] avahi-daemon[2763]: Successfully dropped remaining capabilities.
[    9.838464] avahi-daemon[2763]: Loading service file /services/ssh.service.
[    9.838499] avahi-daemon[2763]: Loading service file /services/udisks.service.
[    9.838536] avahi-daemon[2763]: Network interface enumeration completed.
[    9.838571] avahi-daemon[2763]: Registering HINFO record with values 'X86_64'/'LINUX'.
[    9.838606] avahi-daemon[2763]: Server startup complete. Host name is mj.local. Local service cookie is 2095606922.
[    9.838644] dbus[2789]: [system] Successfully activated service 'org.freedesktop.systemd1'
[    9.838684] dbus-daemon[2789]: dbus[2789]: [system] Successfully activated service 'org.freedesktop.systemd1'
[    9.838721] avahi-daemon[2763]: Service "mj" (/services/udisks.service) successfully established.
[    9.838755] avahi-daemon[2763]: Service "mj" (/services/ssh.service) successfully established.
[   10.377215] r8169 0000:01:00.0 p32p1: link down
[   10.377364] r8169 0000:01:00.0 p32p1: link down
[   12.126367] r8169 0000:01:00.0 p32p1: link up
[   15.429052] uhci_hcd 0000:00:1d.1: reserve dev 3 ep01-ISO, period 1, phase 0, 233 us
[   15.454552] uhci_hcd 0000:00:1d.1: release dev 3 ep01-ISO, period 1, phase 0, 233 us
[   15.584919] uhci_hcd 0000:00:1d.1: reserve dev 3 ep01-ISO, period 1, phase 0, 233 us
[   15.611549] uhci_hcd 0000:00:1d.1: release dev 3 ep01-ISO, period 1, phase 0, 233 us
[   15.676911] uhci_hcd 0000:00:1d.1: reserve dev 3 ep01-ISO, period 1, phase 0, 233 us
[   15.708822] uhci_hcd 0000:00:1d.1: reserve dev 3 ep82-ISO, period 1, phase 0, 34 us
[   20.720620] uhci_hcd 0000:00:1d.1: release dev 3 ep82-ISO, period 1, phase 0, 34 us
[   20.724611] uhci_hcd 0000:00:1d.1: release dev 3 ep01-ISO, period 1, phase 0, 233 us
[   31.480084] CPA self-test:
[   31.498000]  4k 1046528 large 0 gb 0 x 262491[ffff880000000000-ffff8800cf7ff000] miss 198656
[   31.516722]  4k 1046528 large 0 gb 0 x 262491[ffff880000000000-ffff8800cf7ff000] miss 198656
[   31.534920]  4k 1046528 large 0 gb 0 x 262491[ffff880000000000-ffff8800cf7ff000] miss 198656
[   31.534924] ok.
[   86.984503] uhci_hcd 0000:00:1d.1: reserve dev 3 ep01-ISO, period 1, phase 0, 233 us
[   87.014040] uhci_hcd 0000:00:1d.1: release dev 3 ep01-ISO, period 1, phase 0, 233 us
[   87.165729] uhci_hcd 0000:00:1d.1: reserve dev 3 ep01-ISO, period 1, phase 0, 233 us
[   87.204073] uhci_hcd 0000:00:1d.1: release dev 3 ep01-ISO, period 1, phase 0, 233 us
[   87.286432] uhci_hcd 0000:00:1d.1: reserve dev 3 ep01-ISO, period 1, phase 0, 233 us
[   92.731108] uhci_hcd 0000:00:1d.1: release dev 3 ep01-ISO, period 1, phase 0, 233 us
[  162.549018] git (3709) used greatest stack depth: 2736 bytes left
[  164.650528] tty_init_dev: 27 callbacks suppressed
[  241.482118] INFO: task gnome-settings-:3155 blocked for more than 120 seconds.
[  241.483499] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  241.484888] gnome-settings- D 0000000000000000  6136  3155      1 0x00000000
[  241.486265]  ffff8801298afcc8 0000000000000046 ffff88012993b420 0000000000000246
[  241.487652]  ffff8801298affd8 ffff8801298affd8 ffff8801298affd8 ffff8801298affd8
[  241.489035]  ffff88012993a2c0 ffff88012993b420 ffff880128cb0b80 ffff88012993b420
[  241.490421] Call Trace:
[  241.491765]  [<ffffffff815d8064>] schedule+0x24/0x70
[  241.493116]  [<ffffffff81043945>] exit_mm+0x85/0x120
[  241.494467]  [<ffffffff8104628f>] do_exit+0x13f/0x580
[  241.495784]  [<ffffffff81046957>] do_group_exit+0x47/0xb0
[  241.497090]  [<ffffffff810597ef>] get_signal_to_deliver+0x21f/0x580
[  241.498384]  [<ffffffff81002014>] do_signal+0x24/0x120
[  241.499673]  [<ffffffff815da28c>] ? sysret_signal+0x5/0x47
[  241.500964]  [<ffffffff81002195>] do_notify_resume+0x65/0xa0
[  241.502239]  [<ffffffff8129342e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  241.503525]  [<ffffffff815da51a>] int_signal+0x12/0x17
[  241.504813] no locks held by gnome-settings-/3155.
[  241.506095] INFO: task gnome-settings-:3156 blocked for more than 120 seconds.
[  241.507405] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  241.508721] gnome-settings- D 00000000ffffffff  5104  3156      1 0x00000000
[  241.510056]  ffff88011c80bcc8 0000000000000046 ffff88011c80bc78 ffffffff8109ad9d
[  241.511414]  ffff88011c80bfd8 ffff88011c80bfd8 ffff88011c80bfd8 ffff88011c80bfd8
[  241.512780]  ffff8801279fd6e0 ffff88012993a2c0 ffff880129809d28 ffff88012993a2c0
[  241.514134] Call Trace:
[  241.515480]  [<ffffffff8109ad9d>] ? trace_hardirqs_on_caller+0x7d/0x120
[  241.516857]  [<ffffffff815d8064>] schedule+0x24/0x70
[  241.518219]  [<ffffffff81043945>] exit_mm+0x85/0x120
[  241.519592]  [<ffffffff8104628f>] do_exit+0x13f/0x580
[  241.520952]  [<ffffffff81046957>] do_group_exit+0x47/0xb0
[  241.522315]  [<ffffffff810597ef>] get_signal_to_deliver+0x21f/0x580
[  241.523687]  [<ffffffff81002014>] do_signal+0x24/0x120
[  241.525066]  [<ffffffff8109b8a4>] ? __lock_is_held+0x54/0x70
[  241.526436]  [<ffffffff815da28c>] ? sysret_signal+0x5/0x47
[  241.527841]  [<ffffffff81002195>] do_notify_resume+0x65/0xa0
[  241.529237]  [<ffffffff8129342e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  241.530625]  [<ffffffff815da51a>] int_signal+0x12/0x17
[  241.532009] no locks held by gnome-settings-/3156.
[  241.533386] INFO: task gnome-settings-:3157 blocked for more than 120 seconds.
[  241.534778] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  241.536196] gnome-settings- D 00000000ffffffff  5432  3157      1 0x00000000
[  241.537632]  ffff8801279efcc8 0000000000000046 ffff88012993c580 0000000000000246
[  241.539069]  ffff8801279effd8 ffff8801279effd8 ffff8801279effd8 ffff8801279effd8
[  241.540515]  ffff88012661e840 ffff88012993c580 ffff880128cb0b80 ffff88012993c580
[  241.541961] Call Trace:
[  241.543377]  [<ffffffff815d8064>] schedule+0x24/0x70
[  241.544802]  [<ffffffff81043945>] exit_mm+0x85/0x120
[  241.546226]  [<ffffffff8104628f>] do_exit+0x13f/0x580
[  241.547642]  [<ffffffff81046957>] do_group_exit+0x47/0xb0
[  241.549053]  [<ffffffff810597ef>] get_signal_to_deliver+0x21f/0x580
[  241.550468]  [<ffffffff815d940b>] ? _raw_spin_unlock_irq+0x2b/0x50
[  241.551878]  [<ffffffff81002014>] do_signal+0x24/0x120
[  241.553297]  [<ffffffff81122e77>] ? might_fault+0x57/0xb0
[  241.554726]  [<ffffffff815da28c>] ? sysret_signal+0x5/0x47
[  241.556148]  [<ffffffff81002195>] do_notify_resume+0x65/0xa0
[  241.557588]  [<ffffffff8129342e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  241.557590]  [<ffffffff815da51a>] int_signal+0x12/0x17
[  241.557595] no locks held by gnome-settings-/3157.

[-- Attachment #4: revert-replace_fd.patch --]
[-- Type: text/x-patch, Size: 2658 bytes --]

Partial revert of 8280d16172243702ed43432f826ca6130edb4086

From: Pavel Roskin <proski@gnu.org>

This prevents hanging login on Fedora 16:

[  241.482118] INFO: task gnome-settings-:3155 blocked for more than 120 seconds.
[  241.483499] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  241.484888] gnome-settings- D 0000000000000000  6136  3155      1 0x00000000
[  241.486265]  ffff8801298afcc8 0000000000000046 ffff88012993b420 0000000000000246
[  241.487652]  ffff8801298affd8 ffff8801298affd8 ffff8801298affd8 ffff8801298affd8
[  241.489035]  ffff88012993a2c0 ffff88012993b420 ffff880128cb0b80 ffff88012993b420
[  241.490421] Call Trace:
[  241.491765]  [<ffffffff815d8064>] schedule+0x24/0x70
[  241.493116]  [<ffffffff81043945>] exit_mm+0x85/0x120
[  241.494467]  [<ffffffff8104628f>] do_exit+0x13f/0x580
[  241.495784]  [<ffffffff81046957>] do_group_exit+0x47/0xb0
[  241.497090]  [<ffffffff810597ef>] get_signal_to_deliver+0x21f/0x580
[  241.498384]  [<ffffffff81002014>] do_signal+0x24/0x120
[  241.499673]  [<ffffffff815da28c>] ? sysret_signal+0x5/0x47
[  241.500964]  [<ffffffff81002195>] do_notify_resume+0x65/0xa0
[  241.502239]  [<ffffffff8129342e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[  241.503525]  [<ffffffff815da51a>] int_signal+0x12/0x17
[  241.504813] no locks held by gnome-settings-/3155.
---

 fs/coredump.c |   21 ++++++++++++++++++++-
 1 files changed, 20 insertions(+), 1 deletions(-)


diff --git a/fs/coredump.c b/fs/coredump.c
index fd37fac..1d5e301 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -429,6 +429,16 @@ static void wait_for_dump_helpers(struct file *file)
 
 }
 
+static inline void __clear_close_on_exec(int fd, struct fdtable *fdt)
+{
+	__clear_bit(fd, fdt->close_on_exec);
+}
+
+static inline void __set_open_fd(int fd, struct fdtable *fdt)
+{
+	__set_bit(fd, fdt->open_fds);
+}
+
 /*
  * umh_pipe_setup
  * helper function to customize the process used
@@ -443,14 +453,23 @@ static void wait_for_dump_helpers(struct file *file)
 static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
 {
 	struct file *files[2];
+	struct fdtable *fdt;
 	struct coredump_params *cp = (struct coredump_params *)info->data;
+	struct files_struct *cf = current->files;
 	int err = create_pipe_files(files, 0);
 	if (err)
 		return err;
 
 	cp->file = files[1];
 
-	replace_fd(0, files[0], 0);
+	sys_close(0);
+	fd_install(0, files[0]);
+	spin_lock(&cf->file_lock);
+	fdt = files_fdtable(cf);
+	__set_open_fd(0, fdt);
+	__clear_close_on_exec(0, fdt);
+	spin_unlock(&cf->file_lock);
+
 	/* and disallow core files too */
 	current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1};
 

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace_fd()
  2012-10-15 21:14 Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace_fd() Pavel Roskin
@ 2012-10-15 21:51 ` Al Viro
  2012-10-15 23:11   ` Pavel Roskin
  0 siblings, 1 reply; 7+ messages in thread
From: Al Viro @ 2012-10-15 21:51 UTC (permalink / raw)
  To: Pavel Roskin; +Cc: linux-kernel

On Mon, Oct 15, 2012 at 05:14:37PM -0400, Pavel Roskin wrote:
> Hello!
> 
> I tried the current mainline Linux on Fedora 16 x64_64 and found that I
> cannot login in gdm.  I'm using gdm with LXDE.  After a few minutes,
> kernel messages appear indicating a hung process gnome-settings-daemon.

What is it hanging on?

> I'll try to figure out why replace_fd() is not good in
> umh_pipe_setup(), but I'd like to report the problem as soon as
> possible, as it's very visible to the users and I don't want others to
> spend hours bisecting it.
> 
> -- 
> Regards,
> Pavel Roskin

[snip]

> [  241.483499] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  241.484888] gnome-settings- D 0000000000000000  6136  3155      1 0x00000000
> [  241.486265]  ffff8801298afcc8 0000000000000046 ffff88012993b420 0000000000000246
> [  241.487652]  ffff8801298affd8 ffff8801298affd8 ffff8801298affd8 ffff8801298affd8
> [  241.489035]  ffff88012993a2c0 ffff88012993b420 ffff880128cb0b80 ffff88012993b420
> [  241.490421] Call Trace:
> [  241.491765]  [<ffffffff815d8064>] schedule+0x24/0x70
> [  241.493116]  [<ffffffff81043945>] exit_mm+0x85/0x120
> [  241.494467]  [<ffffffff8104628f>] do_exit+0x13f/0x580
> [  241.495784]  [<ffffffff81046957>] do_group_exit+0x47/0xb0
> [  241.497090]  [<ffffffff810597ef>] get_signal_to_deliver+0x21f/0x580
> [  241.498384]  [<ffffffff81002014>] do_signal+0x24/0x120
> [  241.499673]  [<ffffffff815da28c>] ? sysret_signal+0x5/0x47
> [  241.500964]  [<ffffffff81002195>] do_notify_resume+0x65/0xa0
> [  241.502239]  [<ffffffff8129342e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [  241.503525]  [<ffffffff815da51a>] int_signal+0x12/0x17
> [  241.504813] no locks held by gnome-settings-/3155.
> [  241.506095] INFO: task gnome-settings-:3156 blocked for more than 120 seconds.
> [  241.507405] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  241.508721] gnome-settings- D 00000000ffffffff  5104  3156      1 0x00000000
> [  241.510056]  ffff88011c80bcc8 0000000000000046 ffff88011c80bc78 ffffffff8109ad9d
> [  241.511414]  ffff88011c80bfd8 ffff88011c80bfd8 ffff88011c80bfd8 ffff88011c80bfd8
> [  241.512780]  ffff8801279fd6e0 ffff88012993a2c0 ffff880129809d28 ffff88012993a2c0
> [  241.514134] Call Trace:
> [  241.515480]  [<ffffffff8109ad9d>] ? trace_hardirqs_on_caller+0x7d/0x120
> [  241.516857]  [<ffffffff815d8064>] schedule+0x24/0x70
> [  241.518219]  [<ffffffff81043945>] exit_mm+0x85/0x120
> [  241.519592]  [<ffffffff8104628f>] do_exit+0x13f/0x580
> [  241.520952]  [<ffffffff81046957>] do_group_exit+0x47/0xb0
> [  241.522315]  [<ffffffff810597ef>] get_signal_to_deliver+0x21f/0x580
> [  241.523687]  [<ffffffff81002014>] do_signal+0x24/0x120
> [  241.525066]  [<ffffffff8109b8a4>] ? __lock_is_held+0x54/0x70
> [  241.526436]  [<ffffffff815da28c>] ? sysret_signal+0x5/0x47
> [  241.527841]  [<ffffffff81002195>] do_notify_resume+0x65/0xa0
> [  241.529237]  [<ffffffff8129342e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [  241.530625]  [<ffffffff815da51a>] int_signal+0x12/0x17
> [  241.532009] no locks held by gnome-settings-/3156.
> [  241.533386] INFO: task gnome-settings-:3157 blocked for more than 120 seconds.
> [  241.534778] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
> [  241.536196] gnome-settings- D 00000000ffffffff  5432  3157      1 0x00000000
> [  241.537632]  ffff8801279efcc8 0000000000000046 ffff88012993c580 0000000000000246
> [  241.539069]  ffff8801279effd8 ffff8801279effd8 ffff8801279effd8 ffff8801279effd8
> [  241.540515]  ffff88012661e840 ffff88012993c580 ffff880128cb0b80 ffff88012993c580
> [  241.541961] Call Trace:
> [  241.543377]  [<ffffffff815d8064>] schedule+0x24/0x70
> [  241.544802]  [<ffffffff81043945>] exit_mm+0x85/0x120
> [  241.546226]  [<ffffffff8104628f>] do_exit+0x13f/0x580
> [  241.547642]  [<ffffffff81046957>] do_group_exit+0x47/0xb0
> [  241.549053]  [<ffffffff810597ef>] get_signal_to_deliver+0x21f/0x580
> [  241.550468]  [<ffffffff815d940b>] ? _raw_spin_unlock_irq+0x2b/0x50
> [  241.551878]  [<ffffffff81002014>] do_signal+0x24/0x120
> [  241.553297]  [<ffffffff81122e77>] ? might_fault+0x57/0xb0
> [  241.554726]  [<ffffffff815da28c>] ? sysret_signal+0x5/0x47
> [  241.556148]  [<ffffffff81002195>] do_notify_resume+0x65/0xa0
> [  241.557588]  [<ffffffff8129342e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
> [  241.557590]  [<ffffffff815da51a>] int_signal+0x12/0x17
> [  241.557595] no locks held by gnome-settings-/3157.

> @@ -443,14 +453,23 @@ static void wait_for_dump_helpers(struct file *file)
>  static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
>  {
>  	struct file *files[2];
> +	struct fdtable *fdt;
>  	struct coredump_params *cp = (struct coredump_params *)info->data;
> +	struct files_struct *cf = current->files;
>  	int err = create_pipe_files(files, 0);
>  	if (err)
>  		return err;
>  
>  	cp->file = files[1];
>  
> -	replace_fd(0, files[0], 0);
> +	sys_close(0);
> +	fd_install(0, files[0]);
> +	spin_lock(&cf->file_lock);
> +	fdt = files_fdtable(cf);
> +	__set_open_fd(0, fdt);
> +	__clear_close_on_exec(0, fdt);
> +	spin_unlock(&cf->file_lock);

Very interesting.  Let's see what could be going on there.  First of
all, create_pipe_files() has return 0.  There's only one exit where
it can do so and it dereferences both files[0] and files[1] on the
way there.  Since that hadn't oopsed, they are both non-NULL.

IOW, replace_fd(0, files[0], 0) is equivalent to
{
	int err;
	struct file *f = files[0];
        struct files_struct *files = current->files;
        if (0 >= rlimit(RLIMIT_NOFILE))
                return -EMFILE;

        spin_lock(&files->file_lock);
        err = expand_files(files, 0);
        if (unlikely(err < 0))
                goto out_unlock;
        return do_dup2(files, f, 0, 0);

out_unlock:
        spin_unlock(&files->file_lock);
        return err;
}

Aha.  We have the first thing to test - is RLIMIT_NOFILE set to 0 for that
process, by any chance?  We definitedly need to check replace_fd() return
value, BTW.  OK, suppose it wasn't 0.  So we'd done expand_files(files, 0).
expand_files() begins with
        /* Do we need to expand? */
        if (nr < fdt->max_fds)
                return 0;
and ->max_fds is never going to be less than NR_OPEN_DEFAULT, which is
definitely positive.  So expand_files(files, 0) is going to return 0
without doing anything.  And we get to do_dup2():
        fdt = files_fdtable(files);
        tofree = fdt->fd[0];
        if (!tofree && fd_is_open(0, fdt))
                goto Ebusy;
that really shouldn't be possible to hit in this case - it can happen
only for shared descriptor table.  Another thread would need to have
already reserved fd 0, but hadn't got around to installing a reference
to struct file into it.  But we are called from the freshly created
kernel thread, about to exec some userland binary.  Those are spawned
without CLONE_FILES in flags, so the table can't be shared.  It's fresh
from dup_fd() and this bit
                        /*
                         * The fd may be claimed in the fd bitmap but not yet
                         * instantiated in the files array if a sibling thread
                         * is partway through open().  So make sure that this
                         * fd is available to the new process.
                         */
                        __clear_open_fd(open_files - i, new_fdt);
in there would have prevented anything of that kind.

Now we have tofree equal to whatever we used to have in ->fd[0] (realistically
that's going to be NULL).  Next we have
        get_file(file);
        rcu_assign_pointer(fdt->fd[0], file);
        __set_open_fd(0, fdt);
        if (0 & O_CLOEXEC)
                __set_close_on_exec(fd, fdt);
        else
                __clear_close_on_exec(fd, fdt);
        spin_unlock(&files->file_lock);

        if (tofree)
                filp_close(tofree, files);

Now, note that sys_close(0) would have done something very similar -
        file = fdt->fd[0];
        if (!file)
                goto out_unlock;
        rcu_assign_pointer(fdt->fd[0], NULL);
        __clear_close_on_exec(0, fdt);
        __put_unused_fd(files, 0);
        spin_unlock(&files->file_lock);
        filp_close(file, files);
'file' here is what we had in 'tofree'.  We'd ripped it out of descriptor
table and done filp_close() on it.  When we follow with 
	fd_install(0, files[0]);
...
	__set_open_fd(0, fdt);
	__clear_close_on_exec(0, fdt);
we have get_file() done on files[0], files[0] put into ->fd[0] (fd_install()),
result of __put_unused(files, 0); undone (by __set_open_fd()) and we come
to exactly the same situation as with replace_fd().

	All right, so the next step in debugging is to print the damn
return value of replace_fd().  That should narrow the things down.
Another interesting question, of course, is what makes that gnome turd
coredump on each boot?

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace_fd()
  2012-10-15 21:51 ` Al Viro
@ 2012-10-15 23:11   ` Pavel Roskin
  2012-10-15 23:27     ` Al Viro
  0 siblings, 1 reply; 7+ messages in thread
From: Pavel Roskin @ 2012-10-15 23:11 UTC (permalink / raw)
  To: Al Viro; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3193 bytes --]

On Mon, 15 Oct 2012 22:51:27 +0100
Al Viro <viro@ZenIV.linux.org.uk> wrote:

> On Mon, Oct 15, 2012 at 05:14:37PM -0400, Pavel Roskin wrote:
> > Hello!
> > 
> > I tried the current mainline Linux on Fedora 16 x64_64 and found
> > that I cannot login in gdm.  I'm using gdm with LXDE.  After a few
> > minutes, kernel messages appear indicating a hung process
> > gnome-settings-daemon.
> 
> What is it hanging on?

Sorry, I have no idea.  I select my name, enter password and nothing
happens.  I can still move the mouse and select some widgets in gdm.  I
can use Ctrl-Alt-F2 to switch to the test console and login.

I attached gdb to the process and that's what I got:

(gdb) where
#0  0x0000003c19ae8803 in __GI___poll (fds=<optimized out>, nfds=<optimized out>, timeout=<optimized out>) at ../sysdeps/unix/sysv/linux/poll.c:87
#1  0x0000003c1ba45448 in g_main_context_poll (n_fds=10, fds=0x2096dc0, priority=<optimized out>, timeout=41758, context=0x1e3e4a0) at gmain.c:3402
#2  g_main_context_iterate (context=0x1e3e4a0, block=<optimized out>, dispatch=1, self=<optimized out>) at gmain.c:3084
#3  0x0000003c1ba45c85 in g_main_loop_run (loop=0x1f35b70) at gmain.c:3297
#4  0x00000033cf75198d in gtk_main () at gtkmain.c:1362
#5  0x0000000000403d28 in main (argc=1, argv=0x7fffe57b3a78) at main.c:459
(gdb)

I'm not sure it's what you asked.

> Aha.  We have the first thing to test - is RLIMIT_NOFILE set to 0 for
> that process, by any chance?

No.  I made a copy of replace_fd() called by umh_pipe_setup() only, and
here's the output (debugging patch attached):

[   15.792895] replace_fd_debug: rlimit(RLIMIT_NOFILE) = 1024
[   15.792901] replace_fd_debug: file = ffff88011dd5db80
[   15.792903] replace_fd_debug: expand_files returned 0
[   15.792905] umh_pipe_setup: replace_fd_debug returned 0

>  We definitedly need to check
> replace_fd() return value, BTW.  OK, suppose it wasn't 0.

It's 0.

I made simplified functions replacing replace_fd() for umh_pipe_setup()
by substituting parameters and expanding do_dup2().  Here's the
combined function:

void replace_fd2(struct file *file)
{
	struct fdtable *fdt;
	struct files_struct *files = current->files;

	/* old code */
	sys_close(0);
	fd_install(0, file);

	spin_lock(&files->file_lock);
	fdt = files_fdtable(files);

	/* new code */
	get_file(file);
	rcu_assign_pointer(fdt->fd[0], file);

	__set_open_fd(0, fdt);
	__clear_close_on_exec(0, fdt);
	spin_unlock(&files->file_lock);
}

If the "new code" (two lines below the comment) is commented out and the
"old code" is not, everything works.  If the new code is used and the
old code is commented out, I have a hang.  Enabling all code leads
to a hang too.

> 	All right, so the next step in debugging is to print the damn
> return value of replace_fd().  That should narrow the things down.
> Another interesting question, of course, is what makes that gnome turd
> coredump on each boot?

I guess some GNOME programs are "uncomfortable" when launched by LXDE.
Considering that I'm running Fedora 16 with GNOME 3.2, I don't think
anyone would care about my bug reports.  But inability to login due to
kernel changes is bad and should not happen.

-- 
Regards,
Pavel Roskin

[-- Attachment #2: replacefd-debug.patch --]
[-- Type: text/x-patch, Size: 1945 bytes --]

Debug replace_fd()

From: Pavel Roskin <proski@gnu.org>


---

 fs/coredump.c |    4 +++-
 fs/file.c     |   27 +++++++++++++++++++++++++++
 2 files changed, 30 insertions(+), 1 deletions(-)


diff --git a/fs/coredump.c b/fs/coredump.c
index fd37fac..2a5ce3c 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -440,6 +440,7 @@ static void wait_for_dump_helpers(struct file *file)
  * is a special value that we use to trap recursive
  * core dumps
  */
+int replace_fd_debug(unsigned fd, struct file *file, unsigned flags);
 static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
 {
 	struct file *files[2];
@@ -450,7 +451,8 @@ static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
 
 	cp->file = files[1];
 
-	replace_fd(0, files[0], 0);
+	err = replace_fd_debug(0, files[0], 0);
+	printk("%s: replace_fd_debug returned %d\n", __func__, err);
 	/* and disallow core files too */
 	current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1};
 
diff --git a/fs/file.c b/fs/file.c
index d3b5fa8..e209b3c 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -913,6 +913,33 @@ out_unlock:
 	return err;
 }
 
+int replace_fd_debug(unsigned fd, struct file *file, unsigned flags);
+int replace_fd_debug(unsigned fd, struct file *file, unsigned flags)
+{
+	int err;
+	struct files_struct *files = current->files;
+
+	printk("%s: rlimit(RLIMIT_NOFILE) = %ld\n", __func__, rlimit(RLIMIT_NOFILE));
+	printk("%s: file = %p\n", __func__, file);
+
+	if (!file)
+		return __close_fd(files, fd);
+
+	if (fd >= rlimit(RLIMIT_NOFILE))
+		return -EMFILE;
+
+	spin_lock(&files->file_lock);
+	err = expand_files(files, fd);
+	printk("%s: expand_files returned %d\n", __func__, err);
+	if (unlikely(err < 0))
+		goto out_unlock;
+	return do_dup2(files, file, fd, flags);
+
+out_unlock:
+	spin_unlock(&files->file_lock);
+	return err;
+}
+
 SYSCALL_DEFINE3(dup3, unsigned int, oldfd, unsigned int, newfd, int, flags)
 {
 	int err = -EBADF;

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace_fd()
  2012-10-15 23:11   ` Pavel Roskin
@ 2012-10-15 23:27     ` Al Viro
  2012-10-15 23:40       ` Pavel Roskin
  0 siblings, 1 reply; 7+ messages in thread
From: Al Viro @ 2012-10-15 23:27 UTC (permalink / raw)
  To: Pavel Roskin; +Cc: linux-kernel

	I think I understand what's going on there.  Add fput(files[0])
after that replace_fd(); we have a leak and while that's not the right
way to fix it, that'd verify if anything else is going on there.

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace_fd()
  2012-10-15 23:27     ` Al Viro
@ 2012-10-15 23:40       ` Pavel Roskin
  2012-10-15 23:48         ` Al Viro
  0 siblings, 1 reply; 7+ messages in thread
From: Pavel Roskin @ 2012-10-15 23:40 UTC (permalink / raw)
  To: Al Viro; +Cc: linux-kernel

On Tue, 16 Oct 2012 00:27:05 +0100
Al Viro <viro@ZenIV.linux.org.uk> wrote:

> 	I think I understand what's going on there.  Add
> fput(files[0]) after that replace_fd(); we have a leak and while
> that's not the right way to fix it, that'd verify if anything else is
> going on there.

Yes, it's working now!  No more hang on login!

-- 
Regards,
Pavel Roskin

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace_fd()
  2012-10-15 23:40       ` Pavel Roskin
@ 2012-10-15 23:48         ` Al Viro
  2012-10-16 15:02           ` Pavel Roskin
  0 siblings, 1 reply; 7+ messages in thread
From: Al Viro @ 2012-10-15 23:48 UTC (permalink / raw)
  To: Pavel Roskin; +Cc: linux-kernel

On Mon, Oct 15, 2012 at 07:40:08PM -0400, Pavel Roskin wrote:
> On Tue, 16 Oct 2012 00:27:05 +0100
> Al Viro <viro@ZenIV.linux.org.uk> wrote:
> 
> > 	I think I understand what's going on there.  Add
> > fput(files[0]) after that replace_fd(); we have a leak and while
> > that's not the right way to fix it, that'd verify if anything else is
> > going on there.
> 
> Yes, it's working now!  No more hang on login!

That should be closer to the final variant.

diff --git a/fs/coredump.c b/fs/coredump.c
index fd37fac..ce47379 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -450,11 +450,12 @@ static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
 
 	cp->file = files[1];
 
-	replace_fd(0, files[0], 0);
+	err = replace_fd(0, files[0], 0);
+	fput(files[0]);
 	/* and disallow core files too */
 	current->signal->rlim[RLIMIT_CORE] = (struct rlimit){1, 1};
 
-	return 0;
+	return err;
 }
 
 void do_coredump(siginfo_t *siginfo, struct pt_regs *regs)
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index 24ab414..61a5336 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -2132,18 +2132,14 @@ static inline void flush_unauthorized_files(const struct cred *cred,
 		return;
 
 	devnull = dentry_open(&selinux_null, O_RDWR, cred);
-	if (!IS_ERR(devnull)) {
-		/* replace all the matching ones with this */
-		do {
-			replace_fd(n - 1, get_file(devnull), 0);
-		} while ((n = iterate_fd(files, n, match_file, cred)) != 0);
+	if (IS_ERR(devnull))
+		devnull = NULL;
+	/* replace all the matching ones with this */
+	do {
+		replace_fd(n - 1, devnull, 0);
+	} while ((n = iterate_fd(files, n, match_file, cred)) != 0);
+	if (devnull)
 		fput(devnull);
-	} else {
-		/* just close all the matching ones */
-		do {
-			replace_fd(n - 1, NULL, 0);
-		} while ((n = iterate_fd(files, n, match_file, cred)) != 0);
-	}
 }
 
 /*

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* Re: Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace_fd()
  2012-10-15 23:48         ` Al Viro
@ 2012-10-16 15:02           ` Pavel Roskin
  0 siblings, 0 replies; 7+ messages in thread
From: Pavel Roskin @ 2012-10-16 15:02 UTC (permalink / raw)
  To: Al Viro; +Cc: linux-kernel

On Tue, 16 Oct 2012 00:48:53 +0100
Al Viro <viro@ZenIV.linux.org.uk> wrote:

> On Mon, Oct 15, 2012 at 07:40:08PM -0400, Pavel Roskin wrote:
> > On Tue, 16 Oct 2012 00:27:05 +0100
> > Al Viro <viro@ZenIV.linux.org.uk> wrote:
> > 
> > > 	I think I understand what's going on there.  Add
> > > fput(files[0]) after that replace_fd(); we have a leak and while
> > > that's not the right way to fix it, that'd verify if anything
> > > else is going on there.
> > 
> > Yes, it's working now!  No more hang on login!
> 
> That should be closer to the final variant.

It works me, thank you!  I don't use SELinux, so I could not really
test the second part.

-- 
Regards,
Pavel Roskin

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2012-10-16 15:02 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-15 21:14 Bisected regression in Linux 3.7.0-rc1, hang on login caused by replace_fd() Pavel Roskin
2012-10-15 21:51 ` Al Viro
2012-10-15 23:11   ` Pavel Roskin
2012-10-15 23:27     ` Al Viro
2012-10-15 23:40       ` Pavel Roskin
2012-10-15 23:48         ` Al Viro
2012-10-16 15:02           ` Pavel Roskin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox