[ 00/37] 3.0.47-stable review

[ 00/37] 3.0.47-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.0.47 release.
There are 37 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Oct 21 03:12:48 UTC 2012.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.0.47-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Maxim Kachur <mcdebugger@duganet.ru>
    ALSA: emu10k1: add chip details for E-mu 1010 PCIe card

Takashi Iwai <tiwai@suse.de>
    ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new()

Nikola Pajkovsky <npajkovs@redhat.com>
    udf: fix retun value on error path in udf_load_logicalvol

Peter Huewe <peter.huewe@infineon.com>
    tpm: Propagate error from tpm_transmit to fix a timeout hang

H. Peter Anvin <hpa@zytor.com>
    x86, random: Verify RDRAND functionality and allow it to be disabled

H. Peter Anvin <hpa@zytor.com>
    x86, random: Architectural inlines to get random integers with RDRAND

Jan Kara <jack@suse.cz>
    jbd: Fix assertion failure in commit code due to lacking transaction credits

Egbert Eich <eich@suse.de>
    drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy().

Jean-Christian de Rivaz <jc@eclis.ch>
    Add CDC-ACM support for the CX93010-2x UCMxx USB Modem

Jan Engelhardt <jengelh@inai.de>
    netfilter: xt_limit: have r->cost != 0 case work

Florian Westphal <fw@strlen.de>
    netfilter: limit, hashlimit: avoid duplicated inline

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_ct_expect: fix possible access to uninitialized timer

Patrick McHardy <kaber@trash.net>
    netfilter: nf_nat_sip: fix via header translation with multiple parameters

Lin Ming <mlin@ss.pku.edu.cn>
    ipvs: fix oops on NAT reply in br_nf context

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation

Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
    netfilter: nf_ct_ipv4: packets with wrong ihl are invalid

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_conntrack: fix racy timer handling with reliable events

Julian Anastasov <ja@ssi.bg>
    ipvs: fix oops in ip_vs_dst_event on rmmod

Matt Carlson <mcarlson@broadcom.com>
    tg3: Apply short DMA frag workaround to 5906

Amerigo Wang <amwang@redhat.com>
    pktgen: fix crash when generating IPv6 packets

Hildner, Christian <christian.hildner@siemens.com>
    timers: Fix endless looping between cascade() and internal_add_timer()

Daniel Drake <dsd@laptop.org>
    viafb: don't touch clock state on OLPC XO-1.5

Alexander Holler <holler@ahsoftware.de>
    video/udlfb: fix line counting in fb_write

Matthew Garrett <mjg59@srcf.ucam.org>
    module: taint kernel when lve module is loaded

Ian Kent <raven@themaw.net>
    autofs4 - fix reset pending flag on mount fail

Tejun Heo <tj@kernel.org>
    block: fix request_queue->flags initialization

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    xen/bootup: allow read_tscp call for Xen PV guests.

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    xen/bootup: allow {read|write}_cr8 pvops call.

Trond Myklebust <Trond.Myklebust@netapp.com>
    SUNRPC: Ensure that the TCP socket is closed when in CLOSE_WAIT

Stefan Richter <stefanr@s5r6.in-berlin.de>
    firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)

Simon Horman <horms@verge.net.au>
    ARM: 7541/1: Add ARM ERRATA 775420 workaround

Hugh Dickins <hughd@google.com>
    tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking

Jason Wessel <jason.wessel@windriver.com>
    mips,kgdb: fix recursive page fault with CONFIG_KPROBES

Feng Tang <feng.tang@intel.com>
    ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop

Feng Tang <feng.tang@intel.com>
    ACPI: EC: Make the GPE storm threshold a module parameter

Stanislav Kinsbursky <skinsbursky@parallels.com>
    lockd: use rpc client's cl_nodename for id encoding

Russell King <rmk+kernel@arm.linux.org.uk>
    ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels


-------------

Diffstat:

 Documentation/kernel-parameters.txt             |  5 +++++
 Makefile                                        |  4 ++--
 arch/arm/Kconfig                                | 10 ++++++++++
 arch/arm/include/asm/vfpmacros.h                |  4 ++--
 arch/arm/mm/cache-v7.S                          |  3 +++
 arch/mips/kernel/kgdb.c                         |  9 +++++++++
 arch/x86/Kconfig                                |  9 +++++++++
 arch/x86/include/asm/archrandom.h               | 75 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/kernel/cpu/Makefile                    |  1 +
 arch/x86/kernel/cpu/common.c                    |  2 ++
 arch/x86/kernel/cpu/rdrand.c                    | 73 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/x86/xen/enlighten.c                        | 18 +++++++++++++++++-
 block/blk-core.c                                |  2 +-
 drivers/acpi/ec.c                               | 30 +++++++++++++++++++++++++-----
 drivers/char/tpm/tpm.c                          | 21 ++++++++++++++-------
 drivers/firewire/core-cdev.c                    |  4 ++--
 drivers/gpu/drm/radeon/radeon_legacy_encoders.c |  6 +-----
 drivers/net/tg3.c                               |  5 +++--
 drivers/usb/class/cdc-acm.c                     |  3 +++
 drivers/video/udlfb.c                           |  2 +-
 drivers/video/via/via_clock.c                   | 19 +++++++++++++++++++
 fs/autofs4/root.c                               |  6 ++++--
 fs/ceph/export.c                                | 18 ++++++++++++++----
 fs/gfs2/export.c                                |  4 ++++
 fs/isofs/export.c                               |  2 +-
 fs/jbd/commit.c                                 | 45 ++++++++++++++++++++++++++++++++++-----------
 fs/jbd/transaction.c                            | 64 ++++++++++++++++++++++++++++++++++++++++++++--------------------
 fs/lockd/mon.c                                  |  4 +++-
 fs/reiserfs/inode.c                             |  6 +++++-
 fs/udf/super.c                                  |  5 ++++-
 fs/xfs/linux-2.6/xfs_export.c                   |  3 +++
 include/net/ip_vs.h                             |  2 +-
 include/net/netfilter/nf_conntrack_ecache.h     |  1 +
 kernel/module.c                                 |  4 ++++
 kernel/timer.c                                  | 10 ++++++----
 mm/shmem.c                                      |  6 ++++--
 net/core/pktgen.c                               |  2 +-
 net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c  |  8 ++++++++
 net/ipv4/netfilter/nf_nat_sip.c                 | 10 +++++++---
 net/netfilter/ipvs/ip_vs_ctl.c                  |  5 +++--
 net/netfilter/nf_conntrack_core.c               | 16 +++++++++++-----
 net/netfilter/nf_conntrack_expect.c             | 29 ++++++-----------------------
 net/netfilter/xt_hashlimit.c                    |  8 +++-----
 net/netfilter/xt_limit.c                        | 13 ++++++-------
 net/sunrpc/xprtsock.c                           | 21 ++++++++++++++++-----
 sound/pci/ac97/ac97_codec.c                     |  2 ++
 sound/pci/emu10k1/emu10k1_main.c                |  9 +++++++++
 47 files changed, 481 insertions(+), 127 deletions(-)

[ 01/37] ARM: vfp: fix saving d16-d31 vfp registers on v6+ kernels

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Russell King <rmk+kernel@arm.linux.org.uk>

commit 846a136881b8f73c1f74250bf6acfaa309cab1f2 upstream.

Michael Olbrich reported that his test program fails when built with
-O2 -mcpu=cortex-a8 -mfpu=neon, and a kernel which supports v6 and v7
CPUs:

volatile int x = 2;
volatile int64_t y = 2;

int main() {
	volatile int a = 0;
	volatile int64_t b = 0;
	while (1) {
		a = (a + x) % (1 << 30);
		b = (b + y) % (1 << 30);
		assert(a == b);
	}
}

and two instances are run.  When built for just v7 CPUs, this program
works fine.  It uses the "vadd.i64 d19, d18, d16" VFP instruction.

It appears that we do not save the high-16 double VFP registers across
context switches when the kernel is built for v6 CPUs.  Fix that.

Tested-By: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/include/asm/vfpmacros.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/include/asm/vfpmacros.h
+++ b/arch/arm/include/asm/vfpmacros.h
@@ -28,7 +28,7 @@
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
 	tst	\tmp, #HWCAP_VFPv3D16
-	ldceq	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
+	ldceql	p11, cr0, [\base],#32*4		    @ FLDMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0
@@ -52,7 +52,7 @@
 	ldr	\tmp, =elf_hwcap		    @ may not have MVFR regs
 	ldr	\tmp, [\tmp, #0]
 	tst	\tmp, #HWCAP_VFPv3D16
-	stceq	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
+	stceql	p11, cr0, [\base],#32*4		    @ FSTMIAD \base!, {d16-d31}
 	addne	\base, \base, #32*4		    @ step over unused register space
 #else
 	VFPFMRX	\tmp, MVFR0			    @ Media and VFP Feature Register 0

[ 02/37] lockd: use rpc clients cl_nodename for id encoding

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stanislav Kinsbursky <skinsbursky@parallels.com>

commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.

Taking hostname from uts namespace if not safe, because this cuold be
performind during umount operation on child reaper death. And in this case
current->nsproxy is NULL already.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/lockd/mon.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/lockd/mon.c
+++ b/fs/lockd/mon.c
@@ -40,6 +40,7 @@ struct nsm_args {
 	u32			proc;
 
 	char			*mon_name;
+	char			*nodename;
 };
 
 struct nsm_res {
@@ -93,6 +94,7 @@ static int nsm_mon_unmon(struct nsm_hand
 		.vers		= 3,
 		.proc		= NLMPROC_NSM_NOTIFY,
 		.mon_name	= nsm->sm_mon_name,
+		.nodename	= utsname()->nodename,
 	};
 	struct rpc_message msg = {
 		.rpc_argp	= &args,
@@ -429,7 +431,7 @@ static void encode_my_id(struct xdr_stre
 {
 	__be32 *p;
 
-	encode_nsm_string(xdr, utsname()->nodename);
+	encode_nsm_string(xdr, argp->nodename);
 	p = xdr_reserve_space(xdr, 4 + 4 + 4);
 	*p++ = cpu_to_be32(argp->prog);
 	*p++ = cpu_to_be32(argp->vers);

Re: [ 02/37] lockd: use rpc clients cl_nodename for id encoding

[Ben Hutchings]

On Thu, Oct 18, 2012 at 08:16:25PM -0700, Greg Kroah-Hartman wrote:
> 3.0-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Stanislav Kinsbursky <skinsbursky@parallels.com>
> 
> commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.
> 
> Taking hostname from uts namespace if not safe, because this cuold be
> performind during umount operation on child reaper death. And in this case
> current->nsproxy is NULL already.
 
In this case (3.0.y) you haven't included the following change
(commit cb7323fffa85 'lockd: create and use per-net NSM RPC clients on
MON/UNMON requests') that makes lockd actually use cl_nodename.  I
think this patch alone won't fix the bug, as nsm_args::nodename can
end up pointing to freed memory.

(I also wonder whether clients should really be per-net or per UTS
namespace, and whether those should be orthogonal namespaces at all.)

Ben.

[....]
> --- a/fs/lockd/mon.c
> +++ b/fs/lockd/mon.c
> @@ -40,6 +40,7 @@ struct nsm_args {
>  	u32			proc;
>  
>  	char			*mon_name;
> +	char			*nodename;
>  };
>  
>  struct nsm_res {
> @@ -93,6 +94,7 @@ static int nsm_mon_unmon(struct nsm_hand
>  		.vers		= 3,
>  		.proc		= NLMPROC_NSM_NOTIFY,
>  		.mon_name	= nsm->sm_mon_name,
> +		.nodename	= utsname()->nodename,
>  	};
>  	struct rpc_message msg = {
>  		.rpc_argp	= &args,
> @@ -429,7 +431,7 @@ static void encode_my_id(struct xdr_stre
>  {
>  	__be32 *p;
>  
> -	encode_nsm_string(xdr, utsname()->nodename);
> +	encode_nsm_string(xdr, argp->nodename);
>  	p = xdr_reserve_space(xdr, 4 + 4 + 4);
>  	*p++ = cpu_to_be32(argp->prog);
>  	*p++ = cpu_to_be32(argp->vers);

-- 
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
                                                              - Albert Camus

Re: [ 02/37] lockd: use rpc clients cl_nodename for id encoding

[Greg Kroah-Hartman]

On Sat, Oct 20, 2012 at 12:15:18AM +0100, Ben Hutchings wrote:
> On Thu, Oct 18, 2012 at 08:16:25PM -0700, Greg Kroah-Hartman wrote:
> > 3.0-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Stanislav Kinsbursky <skinsbursky@parallels.com>
> > 
> > commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.
> > 
> > Taking hostname from uts namespace if not safe, because this cuold be
> > performind during umount operation on child reaper death. And in this case
> > current->nsproxy is NULL already.
>  
> In this case (3.0.y) you haven't included the following change
> (commit cb7323fffa85 'lockd: create and use per-net NSM RPC clients on
> MON/UNMON requests') that makes lockd actually use cl_nodename.  I
> think this patch alone won't fix the bug, as nsm_args::nodename can
> end up pointing to freed memory.
> 
> (I also wonder whether clients should really be per-net or per UTS
> namespace, and whether those should be orthogonal namespaces at all.)

Hm, Trond, should I also include the other commit above in the next
3.0-stable release?

Or should this one be dropped?

thanks,

greg k-h

Re: [ 02/37] lockd: use rpc clients cl_nodename for id encoding

[Myklebust, Trond]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 1718 bytes --]

On Sun, 2012-10-21 at 09:26 -0700, Greg Kroah-Hartman wrote:
> On Sat, Oct 20, 2012 at 12:15:18AM +0100, Ben Hutchings wrote:
> > On Thu, Oct 18, 2012 at 08:16:25PM -0700, Greg Kroah-Hartman wrote:
> > > 3.0-stable review patch.  If anyone has any objections, please let me know.
> > > 
> > > ------------------
> > > 
> > > From: Stanislav Kinsbursky <skinsbursky@parallels.com>
> > > 
> > > commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.
> > > 
> > > Taking hostname from uts namespace if not safe, because this cuold be
> > > performind during umount operation on child reaper death. And in this case
> > > current->nsproxy is NULL already.
> >  
> > In this case (3.0.y) you haven't included the following change
> > (commit cb7323fffa85 'lockd: create and use per-net NSM RPC clients on
> > MON/UNMON requests') that makes lockd actually use cl_nodename.  I
> > think this patch alone won't fix the bug, as nsm_args::nodename can
> > end up pointing to freed memory.
> > 
> > (I also wonder whether clients should really be per-net or per UTS
> > namespace, and whether those should be orthogonal namespaces at all.)
> 
> Hm, Trond, should I also include the other commit above in the next
> 3.0-stable release?
> 
> Or should this one be dropped?

Hi Greg,

Applying this patch shouldn't be harmful, but since it isn't actually
fixing a problem (there being no net-namespace code in Linux-3.0), I'd
suggest just dropping it.

Thanks!
  Trond

-- 
Trond Myklebust
Linux NFS client maintainer

NetApp
Trond.Myklebust@netapp.com
www.netapp.com
ÿôèº{.nÇ+‰·Ÿ®‰­†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a­¢f£¢·hšïêÿ‘êçz_è®\x03(­éšŽŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨è­Ú&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥

Re: [ 02/37] lockd: use rpc clients cl_nodename for id encoding

[Ben Hutchings]

[-- Attachment #1: Type: text/plain, Size: 2378 bytes --]

On Mon, 2012-10-22 at 17:02 +0000, Myklebust, Trond wrote:
> On Sun, 2012-10-21 at 09:26 -0700, Greg Kroah-Hartman wrote:
> > On Sat, Oct 20, 2012 at 12:15:18AM +0100, Ben Hutchings wrote:
> > > On Thu, Oct 18, 2012 at 08:16:25PM -0700, Greg Kroah-Hartman wrote:
> > > > 3.0-stable review patch.  If anyone has any objections, please let me know.
> > > > 
> > > > ------------------
> > > > 
> > > > From: Stanislav Kinsbursky <skinsbursky@parallels.com>
> > > > 
> > > > commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.
> > > > 
> > > > Taking hostname from uts namespace if not safe, because this cuold be
> > > > performind during umount operation on child reaper death. And in this case
> > > > current->nsproxy is NULL already.
> > >  
> > > In this case (3.0.y) you haven't included the following change
> > > (commit cb7323fffa85 'lockd: create and use per-net NSM RPC clients on
> > > MON/UNMON requests') that makes lockd actually use cl_nodename.  I
> > > think this patch alone won't fix the bug, as nsm_args::nodename can
> > > end up pointing to freed memory.
> > > 
> > > (I also wonder whether clients should really be per-net or per UTS
> > > namespace, and whether those should be orthogonal namespaces at all.)
> > 
> > Hm, Trond, should I also include the other commit above in the next
> > 3.0-stable release?
> > 
> > Or should this one be dropped?
> 
> Hi Greg,
> 
> Applying this patch shouldn't be harmful, but since it isn't actually
> fixing a problem (there being no net-namespace code in Linux-3.0), I'd
> suggest just dropping it.

If I understand rightly:
1. Prior to introduction of the per-netns clients, nsm_monitor() and
nsm_unmonitor() are called from a kthread which runs in the initial net
and utsname namespace.
2. Therefore, in nsm_mon_unmon(), current->nsproxy always refers to the
initial namespaces and is never NULL.
3. The per-netns clients were introduced in 3.5, so only 3.6.y needed
fixing.
4. However, this one change is harmless for earlier versions.

(I think that point 1 is not quite true in that nsm_unmonitor() can also
be called on module removal, potentially in something other than the
initial utsname namespace.  But it still won't result in a crash, and
it's hardly worth worrying about.)

Ben.

-- 
Ben Hutchings
Humour is the best antidote to reality.

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 828 bytes --]

Re: [ 02/37] lockd: use rpc clients cl_nodename for id encoding

[Greg Kroah-Hartman]

On Mon, Oct 22, 2012 at 05:02:52PM +0000, Myklebust, Trond wrote:
> On Sun, 2012-10-21 at 09:26 -0700, Greg Kroah-Hartman wrote:
> > On Sat, Oct 20, 2012 at 12:15:18AM +0100, Ben Hutchings wrote:
> > > On Thu, Oct 18, 2012 at 08:16:25PM -0700, Greg Kroah-Hartman wrote:
> > > > 3.0-stable review patch.  If anyone has any objections, please let me know.
> > > > 
> > > > ------------------
> > > > 
> > > > From: Stanislav Kinsbursky <skinsbursky@parallels.com>
> > > > 
> > > > commit 303a7ce92064c285a04c870f2dc0192fdb2968cb upstream.
> > > > 
> > > > Taking hostname from uts namespace if not safe, because this cuold be
> > > > performind during umount operation on child reaper death. And in this case
> > > > current->nsproxy is NULL already.
> > >  
> > > In this case (3.0.y) you haven't included the following change
> > > (commit cb7323fffa85 'lockd: create and use per-net NSM RPC clients on
> > > MON/UNMON requests') that makes lockd actually use cl_nodename.  I
> > > think this patch alone won't fix the bug, as nsm_args::nodename can
> > > end up pointing to freed memory.
> > > 
> > > (I also wonder whether clients should really be per-net or per UTS
> > > namespace, and whether those should be orthogonal namespaces at all.)
> > 
> > Hm, Trond, should I also include the other commit above in the next
> > 3.0-stable release?
> > 
> > Or should this one be dropped?
> 
> Hi Greg,
> 
> Applying this patch shouldn't be harmful, but since it isn't actually
> fixing a problem (there being no net-namespace code in Linux-3.0), I'd
> suggest just dropping it.

Ok, now reverted, thanks.

greg k-h

[ 03/37] ACPI: EC: Make the GPE storm threshold a module parameter

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Feng Tang <feng.tang@intel.com>

commit a520d52e99b14ba7db135e916348f12f2a6e09be upstream.

The Linux EC driver includes a mechanism to detect GPE storms,
and switch from interrupt-mode to polling mode.  However, polling
mode sometimes doesn't work, so the workaround is problematic.
Also, different systems seem to need the threshold for detecting
the GPE storm at different levels.

ACPI_EC_STORM_THRESHOLD was initially 20 when it's created, and
was changed to 8 in 2.6.28 commit 06cf7d3c7 "ACPI: EC: lower interrupt storm
threshold" to fix kernel bug 11892 by forcing the laptop in that bug to
work in polling mode. However in bug 45151, it works fine in interrupt
mode if we lift the threshold back to 20.

This patch makes the threshold a module parameter so that user has a
flexible option to debug/workaround this issue.

The default is unchanged.

This is also a preparation patch to fix specific systems:
	https://bugzilla.kernel.org/show_bug.cgi?id=45151

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/ec.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -71,9 +71,6 @@ enum ec_command {
 #define ACPI_EC_UDELAY_GLK	1000	/* Wait 1ms max. to get global lock */
 #define ACPI_EC_MSI_UDELAY	550	/* Wait 550us for MSI EC */
 
-#define ACPI_EC_STORM_THRESHOLD 8	/* number of false interrupts
-					   per one transaction */
-
 enum {
 	EC_FLAGS_QUERY_PENDING,		/* Query is pending */
 	EC_FLAGS_GPE_STORM,		/* GPE storm detected */
@@ -87,6 +84,15 @@ static unsigned int ec_delay __read_most
 module_param(ec_delay, uint, 0644);
 MODULE_PARM_DESC(ec_delay, "Timeout(ms) waited until an EC command completes");
 
+/*
+ * If the number of false interrupts per one transaction exceeds
+ * this threshold, will think there is a GPE storm happened and
+ * will disable the GPE for normal transaction.
+ */
+static unsigned int ec_storm_threshold  __read_mostly = 8;
+module_param(ec_storm_threshold, uint, 0644);
+MODULE_PARM_DESC(ec_storm_threshold, "Maxim false GPE numbers not considered as GPE storm");
+
 /* If we find an EC via the ECDT, we need to keep a ptr to its context */
 /* External interfaces use first EC only, so remember */
 typedef int (*acpi_ec_query_func) (void *data);
@@ -319,7 +325,7 @@ static int acpi_ec_transaction(struct ac
 		msleep(1);
 		/* It is safe to enable the GPE outside of the transaction. */
 		acpi_enable_gpe(NULL, ec->gpe);
-	} else if (t->irq_count > ACPI_EC_STORM_THRESHOLD) {
+	} else if (t->irq_count > ec_storm_threshold) {
 		pr_info(PREFIX "GPE storm detected, "
 			"transactions will use polling mode\n");
 		set_bit(EC_FLAGS_GPE_STORM, &ec->flags);

[ 04/37] ACPI: EC: Add a quirk for CLEVO M720T/M730T laptop

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Feng Tang <feng.tang@intel.com>

commit 67bfa9b60bd689601554526d144b21d529f78a09 upstream.

By enlarging the GPE storm threshold back to 20, that laptop's
EC works fine with interrupt mode instead of polling mode.

https://bugzilla.kernel.org/show_bug.cgi?id=45151

Reported-and-Tested-by: Francesco <trentini@dei.unipd.it>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/ec.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -920,6 +920,17 @@ static int ec_flag_msi(const struct dmi_
 	return 0;
 }
 
+/*
+ * Clevo M720 notebook actually works ok with IRQ mode, if we lifted
+ * the GPE storm threshold back to 20
+ */
+static int ec_enlarge_storm_threshold(const struct dmi_system_id *id)
+{
+	pr_debug("Setting the EC GPE storm threshold to 20\n");
+	ec_storm_threshold  = 20;
+	return 0;
+}
+
 static struct dmi_system_id __initdata ec_dmi_table[] = {
 	{
 	ec_skip_dsdt_scan, "Compal JFL92", {
@@ -951,10 +962,13 @@ static struct dmi_system_id __initdata e
 	{
 	ec_validate_ecdt, "ASUS hardware", {
 	DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc.") }, NULL},
+	{
+	ec_enlarge_storm_threshold, "CLEVO hardware", {
+	DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."),
+	DMI_MATCH(DMI_PRODUCT_NAME, "M720T/M730T"),}, NULL},
 	{},
 };
 
-
 int __init acpi_ec_ecdt_probe(void)
 {
 	acpi_status status;

[ 05/37] mips,kgdb: fix recursive page fault with CONFIG_KPROBES

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Wessel <jason.wessel@windriver.com>

commit f0a996eeeda214f4293e234df33b29bec003b536 upstream.

This fault was detected using the kgdb test suite on boot and it
crashes recursively due to the fact that CONFIG_KPROBES on mips adds
an extra die notifier in the page fault handler.  The crash signature
looks like this:

kgdbts:RUN bad memory access test
KGDB: re-enter exception: ALL breakpoints killed
Call Trace:
[<807b7548>] dump_stack+0x20/0x54
[<807b7548>] dump_stack+0x20/0x54

The fix for now is to have kgdb return immediately if the fault type
is DIE_PAGE_FAULT and allow the kprobe code to decide what is supposed
to happen.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/mips/kernel/kgdb.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/arch/mips/kernel/kgdb.c
+++ b/arch/mips/kernel/kgdb.c
@@ -283,6 +283,15 @@ static int kgdb_mips_notify(struct notif
 	struct pt_regs *regs = args->regs;
 	int trap = (regs->cp0_cause & 0x7c) >> 2;
 
+#ifdef CONFIG_KPROBES
+	/*
+	 * Return immediately if the kprobes fault notifier has set
+	 * DIE_PAGE_FAULT.
+	 */
+	if (cmd == DIE_PAGE_FAULT)
+		return NOTIFY_DONE;
+#endif /* CONFIG_KPROBES */
+
 	/* Userspace events, ignore. */
 	if (user_mode(regs))
 		return NOTIFY_DONE;

[ 06/37] tmpfs,ceph,gfs2,isofs,reiserfs,xfs: fix fh_len checking

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hugh Dickins <hughd@google.com>

commit 35c2a7f4908d404c9124c2efc6ada4640ca4d5d5 upstream.

Fuzzing with trinity oopsed on the 1st instruction of shmem_fh_to_dentry(),
	u64 inum = fid->raw[2];
which is unhelpfully reported as at the end of shmem_alloc_inode():

BUG: unable to handle kernel paging request at ffff880061cd3000
IP: [<ffffffff812190d0>] shmem_alloc_inode+0x40/0x40
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Call Trace:
 [<ffffffff81488649>] ? exportfs_decode_fh+0x79/0x2d0
 [<ffffffff812d77c3>] do_handle_open+0x163/0x2c0
 [<ffffffff812d792c>] sys_open_by_handle_at+0xc/0x10
 [<ffffffff83a5f3f8>] tracesys+0xe1/0xe6

Right, tmpfs is being stupid to access fid->raw[2] before validating that
fh_len includes it: the buffer kmalloc'ed by do_sys_name_to_handle() may
fall at the end of a page, and the next page not be present.

But some other filesystems (ceph, gfs2, isofs, reiserfs, xfs) are being
careless about fh_len too, in fh_to_dentry() and/or fh_to_parent(), and
could oops in the same way: add the missing fh_len checks to those.

Reported-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Sage Weil <sage@inktank.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ceph/export.c              |   18 ++++++++++++++----
 fs/gfs2/export.c              |    4 ++++
 fs/isofs/export.c             |    2 +-
 fs/reiserfs/inode.c           |    6 +++++-
 fs/xfs/linux-2.6/xfs_export.c |    3 +++
 mm/shmem.c                    |    6 ++++--
 6 files changed, 31 insertions(+), 8 deletions(-)

--- a/fs/ceph/export.c
+++ b/fs/ceph/export.c
@@ -84,7 +84,7 @@ static int ceph_encode_fh(struct dentry
  * FIXME: we should try harder by querying the mds for the ino.
  */
 static struct dentry *__fh_to_dentry(struct super_block *sb,
-				     struct ceph_nfs_fh *fh)
+				     struct ceph_nfs_fh *fh, int fh_len)
 {
 	struct ceph_mds_client *mdsc = ceph_sb_to_client(sb)->mdsc;
 	struct inode *inode;
@@ -92,6 +92,9 @@ static struct dentry *__fh_to_dentry(str
 	struct ceph_vino vino;
 	int err;
 
+	if (fh_len < sizeof(*fh) / 4)
+		return ERR_PTR(-ESTALE);
+
 	dout("__fh_to_dentry %llx\n", fh->ino);
 	vino.ino = fh->ino;
 	vino.snap = CEPH_NOSNAP;
@@ -136,7 +139,7 @@ static struct dentry *__fh_to_dentry(str
  * convert connectable fh to dentry
  */
 static struct dentry *__cfh_to_dentry(struct super_block *sb,
-				      struct ceph_nfs_confh *cfh)
+				      struct ceph_nfs_confh *cfh, int fh_len)
 {
 	struct ceph_mds_client *mdsc = ceph_sb_to_client(sb)->mdsc;
 	struct inode *inode;
@@ -144,6 +147,9 @@ static struct dentry *__cfh_to_dentry(st
 	struct ceph_vino vino;
 	int err;
 
+	if (fh_len < sizeof(*cfh) / 4)
+		return ERR_PTR(-ESTALE);
+
 	dout("__cfh_to_dentry %llx (%llx/%x)\n",
 	     cfh->ino, cfh->parent_ino, cfh->parent_name_hash);
 
@@ -193,9 +199,11 @@ static struct dentry *ceph_fh_to_dentry(
 					int fh_len, int fh_type)
 {
 	if (fh_type == 1)
-		return __fh_to_dentry(sb, (struct ceph_nfs_fh *)fid->raw);
+		return __fh_to_dentry(sb, (struct ceph_nfs_fh *)fid->raw,
+								fh_len);
 	else
-		return __cfh_to_dentry(sb, (struct ceph_nfs_confh *)fid->raw);
+		return __cfh_to_dentry(sb, (struct ceph_nfs_confh *)fid->raw,
+								fh_len);
 }
 
 /*
@@ -216,6 +224,8 @@ static struct dentry *ceph_fh_to_parent(
 
 	if (fh_type == 1)
 		return ERR_PTR(-ESTALE);
+	if (fh_len < sizeof(*cfh) / 4)
+		return ERR_PTR(-ESTALE);
 
 	pr_debug("fh_to_parent %llx/%d\n", cfh->parent_ino,
 		 cfh->parent_name_hash);
--- a/fs/gfs2/export.c
+++ b/fs/gfs2/export.c
@@ -167,6 +167,8 @@ static struct dentry *gfs2_fh_to_dentry(
 	case GFS2_SMALL_FH_SIZE:
 	case GFS2_LARGE_FH_SIZE:
 	case GFS2_OLD_FH_SIZE:
+		if (fh_len < GFS2_SMALL_FH_SIZE)
+			return NULL;
 		this.no_formal_ino = ((u64)be32_to_cpu(fh[0])) << 32;
 		this.no_formal_ino |= be32_to_cpu(fh[1]);
 		this.no_addr = ((u64)be32_to_cpu(fh[2])) << 32;
@@ -186,6 +188,8 @@ static struct dentry *gfs2_fh_to_parent(
 	switch (fh_type) {
 	case GFS2_LARGE_FH_SIZE:
 	case GFS2_OLD_FH_SIZE:
+		if (fh_len < GFS2_LARGE_FH_SIZE)
+			return NULL;
 		parent.no_formal_ino = ((u64)be32_to_cpu(fh[4])) << 32;
 		parent.no_formal_ino |= be32_to_cpu(fh[5]);
 		parent.no_addr = ((u64)be32_to_cpu(fh[6])) << 32;
--- a/fs/isofs/export.c
+++ b/fs/isofs/export.c
@@ -179,7 +179,7 @@ static struct dentry *isofs_fh_to_parent
 {
 	struct isofs_fid *ifid = (struct isofs_fid *)fid;
 
-	if (fh_type != 2)
+	if (fh_len < 2 || fh_type != 2)
 		return NULL;
 
 	return isofs_export_iget(sb,
--- a/fs/reiserfs/inode.c
+++ b/fs/reiserfs/inode.c
@@ -1568,8 +1568,10 @@ struct dentry *reiserfs_fh_to_dentry(str
 			reiserfs_warning(sb, "reiserfs-13077",
 				"nfsd/reiserfs, fhtype=%d, len=%d - odd",
 				fh_type, fh_len);
-		fh_type = 5;
+		fh_type = fh_len;
 	}
+	if (fh_len < 2)
+		return NULL;
 
 	return reiserfs_get_dentry(sb, fid->raw[0], fid->raw[1],
 		(fh_type == 3 || fh_type >= 5) ? fid->raw[2] : 0);
@@ -1578,6 +1580,8 @@ struct dentry *reiserfs_fh_to_dentry(str
 struct dentry *reiserfs_fh_to_parent(struct super_block *sb, struct fid *fid,
 		int fh_len, int fh_type)
 {
+	if (fh_type > fh_len)
+		fh_type = fh_len;
 	if (fh_type < 4)
 		return NULL;
 
--- a/fs/xfs/linux-2.6/xfs_export.c
+++ b/fs/xfs/linux-2.6/xfs_export.c
@@ -195,6 +195,9 @@ xfs_fs_fh_to_parent(struct super_block *
 	struct xfs_fid64	*fid64 = (struct xfs_fid64 *)fid;
 	struct inode		*inode = NULL;
 
+	if (fh_len < xfs_fileid_length(fileid_type))
+		return NULL;
+
 	switch (fileid_type) {
 	case FILEID_INO32_GEN_PARENT:
 		inode = xfs_nfs_get_inode(sb, fid->i32.parent_ino,
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2348,12 +2348,14 @@ static struct dentry *shmem_fh_to_dentry
 {
 	struct inode *inode;
 	struct dentry *dentry = NULL;
-	u64 inum = fid->raw[2];
-	inum = (inum << 32) | fid->raw[1];
+	u64 inum;
 
 	if (fh_len < 3)
 		return NULL;
 
+	inum = fid->raw[2];
+	inum = (inum << 32) | fid->raw[1];
+
 	inode = ilookup5(sb, (unsigned long)(inum + fid->raw[0]),
 			shmem_match, fid->raw);
 	if (inode) {

[ 07/37] ARM: 7541/1: Add ARM ERRATA 775420 workaround

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Simon Horman <horms@verge.net.au>

commit 7253b85cc62d6ff84143d96fe6cd54f73736f4d7 upstream.

arm: Add ARM ERRATA 775420 workaround

Workaround for the 775420 Cortex-A9 (r2p2, r2p6,r2p8,r2p10,r3p0) erratum.
In case a date cache maintenance operation aborts with MMU exception, it
might cause the processor to deadlock. This workaround puts DSB before
executing ISB if an abort may occur on cache maintenance.

Based on work by Kouei Abe and feedback from Catalin Marinas.

Signed-off-by: Kouei Abe <kouei.abe.cp@rms.renesas.com>
[ horms@verge.net.au: Changed to implementation
  suggested by catalin.marinas@arm.com ]
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/Kconfig       |   10 ++++++++++
 arch/arm/mm/cache-v7.S |    3 +++
 2 files changed, 13 insertions(+)

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1260,6 +1260,16 @@ config PL310_ERRATA_769419
 	  on systems with an outer cache, the store buffer is drained
 	  explicitly.
 
+config ARM_ERRATA_775420
+       bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
+       depends on CPU_V7
+       help
+	 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
+	 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
+	 operation aborts with MMU exception, it might cause the processor
+	 to deadlock. This workaround puts DSB before executing ISB if
+	 an abort may occur on cache maintenance.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -211,6 +211,9 @@ ENTRY(v7_coherent_user_range)
  * isn't mapped, just try the next page.
  */
 9001:
+#ifdef CONFIG_ARM_ERRATA_775420
+	dsb
+#endif
 	mov	r12, r12, lsr #12
 	mov	r12, r12, lsl #12
 	add	r12, r12, #4096

[ 08/37] firewire: cdev: fix user memory corruption (i386 userland on amd64 kernel)

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stefan Richter <stefanr@s5r6.in-berlin.de>

commit 790198f74c9d1b46b6a89504361b1a844670d050 upstream.

Fix two bugs of the /dev/fw* character device concerning the
FW_CDEV_IOC_GET_INFO ioctl with nonzero fw_cdev_get_info.bus_reset.
(Practically all /dev/fw* clients issue this ioctl right after opening
the device.)

Both bugs are caused by sizeof(struct fw_cdev_event_bus_reset) being 36
without natural alignment and 40 with natural alignment.

 1) Memory corruption, affecting i386 userland on amd64 kernel:
    Userland reserves a 36 bytes large buffer, kernel writes 40 bytes.
    This has been first found and reported against libraw1394 if
    compiled with gcc 4.7 which happens to order libraw1394's stack such
    that the bug became visible as data corruption.

 2) Information leak, affecting all kernel architectures except i386:
    4 bytes of random kernel stack data were leaked to userspace.

Hence limit the respective copy_to_user() to the 32-bit aligned size of
struct fw_cdev_event_bus_reset.

Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firewire/core-cdev.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -471,8 +471,8 @@ static int ioctl_get_info(struct client
 	client->bus_reset_closure = a->bus_reset_closure;
 	if (a->bus_reset != 0) {
 		fill_bus_reset_event(&bus_reset, client);
-		ret = copy_to_user(u64_to_uptr(a->bus_reset),
-				   &bus_reset, sizeof(bus_reset));
+		/* unaligned size of bus_reset is 36 bytes */
+		ret = copy_to_user(u64_to_uptr(a->bus_reset), &bus_reset, 36);
 	}
 	if (ret == 0 && list_empty(&client->link))
 		list_add_tail(&client->link, &client->device->client_list);

[ 09/37] SUNRPC: Ensure that the TCP socket is closed when in CLOSE_WAIT

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <Trond.Myklebust@netapp.com>

commit a519fc7a70d1a918574bb826cc6905b87b482eb9 upstream.

Instead of doing a shutdown() call, we need to do an actual close().
Ditto if/when the server is sending us junk RPC headers.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/xprtsock.c |   21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -1015,6 +1015,16 @@ static void xs_udp_data_ready(struct soc
 	read_unlock_bh(&sk->sk_callback_lock);
 }
 
+/*
+ * Helper function to force a TCP close if the server is sending
+ * junk and/or it has put us in CLOSE_WAIT
+ */
+static void xs_tcp_force_close(struct rpc_xprt *xprt)
+{
+	set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+	xprt_force_disconnect(xprt);
+}
+
 static inline void xs_tcp_read_fraghdr(struct rpc_xprt *xprt, struct xdr_skb_reader *desc)
 {
 	struct sock_xprt *transport = container_of(xprt, struct sock_xprt, xprt);
@@ -1041,7 +1051,7 @@ static inline void xs_tcp_read_fraghdr(s
 	/* Sanity check of the record length */
 	if (unlikely(transport->tcp_reclen < 8)) {
 		dprintk("RPC:       invalid TCP record fragment length\n");
-		xprt_force_disconnect(xprt);
+		xs_tcp_force_close(xprt);
 		return;
 	}
 	dprintk("RPC:       reading TCP record fragment of length %d\n",
@@ -1122,7 +1132,7 @@ static inline void xs_tcp_read_calldir(s
 		break;
 	default:
 		dprintk("RPC:       invalid request message type\n");
-		xprt_force_disconnect(&transport->xprt);
+		xs_tcp_force_close(&transport->xprt);
 	}
 	xs_tcp_check_fraghdr(transport);
 }
@@ -1445,6 +1455,8 @@ static void xs_tcp_cancel_linger_timeout
 static void xs_sock_mark_closed(struct rpc_xprt *xprt)
 {
 	smp_mb__before_clear_bit();
+	clear_bit(XPRT_CONNECTION_ABORT, &xprt->state);
+	clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
 	clear_bit(XPRT_CLOSE_WAIT, &xprt->state);
 	clear_bit(XPRT_CLOSING, &xprt->state);
 	smp_mb__after_clear_bit();
@@ -1502,8 +1514,8 @@ static void xs_tcp_state_change(struct s
 		break;
 	case TCP_CLOSE_WAIT:
 		/* The server initiated a shutdown of the socket */
-		xprt_force_disconnect(xprt);
 		xprt->connect_cookie++;
+		xs_tcp_force_close(xprt);
 	case TCP_CLOSING:
 		/*
 		 * If the server closed down the connection, make sure that
@@ -2146,8 +2158,7 @@ static void xs_tcp_setup_socket(struct w
 		/* We're probably in TIME_WAIT. Get rid of existing socket,
 		 * and retry
 		 */
-		set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
-		xprt_force_disconnect(xprt);
+		xs_tcp_force_close(xprt);
 		break;
 	case -ECONNREFUSED:
 	case -ECONNRESET:

[ 10/37] xen/bootup: allow {read|write}_cr8 pvops call.

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 1a7bbda5b1ab0e02622761305a32dc38735b90b2 upstream.

We actually do not do anything about it. Just return a default
value of zero and if the kernel tries to write anything but 0
we BUG_ON.

This fixes the case when an user tries to suspend the machine
and it blows up in save_processor_state b/c 'read_cr8' is set
to NULL and we get:

kernel BUG at /home/konrad/ssd/linux/arch/x86/include/asm/paravirt.h:100!
invalid opcode: 0000 [#1] SMP
Pid: 2687, comm: init.late Tainted: G           O 3.6.0upstream-00002-gac264ac-dirty #4 Bochs Bochs
RIP: e030:[<ffffffff814d5f42>]  [<ffffffff814d5f42>] save_processor_state+0x212/0x270

.. snip..
Call Trace:
 [<ffffffff810733bf>] do_suspend_lowlevel+0xf/0xac
 [<ffffffff8107330c>] ? x86_acpi_suspend_lowlevel+0x10c/0x150
 [<ffffffff81342ee2>] acpi_suspend_enter+0x57/0xd5

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/enlighten.c |   16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -803,7 +803,16 @@ static void xen_write_cr4(unsigned long
 
 	native_write_cr4(cr4);
 }
-
+#ifdef CONFIG_X86_64
+static inline unsigned long xen_read_cr8(void)
+{
+	return 0;
+}
+static inline void xen_write_cr8(unsigned long val)
+{
+	BUG_ON(val);
+}
+#endif
 static int xen_write_msr_safe(unsigned int msr, unsigned low, unsigned high)
 {
 	int ret;
@@ -968,6 +977,11 @@ static const struct pv_cpu_ops xen_cpu_o
 	.read_cr4_safe = native_read_cr4_safe,
 	.write_cr4 = xen_write_cr4,
 
+#ifdef CONFIG_X86_64
+	.read_cr8 = xen_read_cr8,
+	.write_cr8 = xen_write_cr8,
+#endif
+
 	.wbinvd = native_wbinvd,
 
 	.read_msr = native_read_msr_safe,

[ 11/37] xen/bootup: allow read_tscp call for Xen PV guests.

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit cd0608e71e9757f4dae35bcfb4e88f4d1a03a8ab upstream.

The hypervisor will trap it. However without this patch,
we would crash as the .read_tscp is set to NULL. This patch
fixes it and sets it to the native_read_tscp call.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/xen/enlighten.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -989,6 +989,8 @@ static const struct pv_cpu_ops xen_cpu_o
 	.read_tsc = native_read_tsc,
 	.read_pmc = native_read_pmc,
 
+	.read_tscp = native_read_tscp,
+
 	.iret = xen_iret,
 	.irq_enable_sysexit = xen_sysexit,
 #ifdef CONFIG_X86_64

[ 12/37] block: fix request_queue->flags initialization

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 60ea8226cbd5c8301f9a39edc574ddabcb8150e0 upstream.

A queue newly allocated with blk_alloc_queue_node() has only
QUEUE_FLAG_BYPASS set.  For request-based drivers,
blk_init_allocated_queue() is called and q->queue_flags is overwritten
with QUEUE_FLAG_DEFAULT which doesn't include BYPASS even though the
initial bypass is still in effect.

In blk_init_allocated_queue(), or QUEUE_FLAG_DEFAULT to q->queue_flags
instead of overwriting.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/blk-core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -524,7 +524,7 @@ blk_init_allocated_queue(struct request_
 	q->request_fn		= rfn;
 	q->prep_rq_fn		= NULL;
 	q->unprep_rq_fn		= NULL;
-	q->queue_flags		= QUEUE_FLAG_DEFAULT;
+	q->queue_flags		|= QUEUE_FLAG_DEFAULT;
 
 	/* Override internal queue lock with supplied lock pointer */
 	if (lock)

Re: [ 12/37] block: fix request_queue->flags initialization

[Ben Hutchings]

On Thu, Oct 18, 2012 at 08:16:35PM -0700, Greg Kroah-Hartman wrote:
> 3.0-stable review patch.  If anyone has any objections, please let me know.
> 
> ------------------
> 
> From: Tejun Heo <tj@kernel.org>
> 
> commit 60ea8226cbd5c8301f9a39edc574ddabcb8150e0 upstream.
> 
> A queue newly allocated with blk_alloc_queue_node() has only
> QUEUE_FLAG_BYPASS set.  For request-based drivers,
> blk_init_allocated_queue() is called and q->queue_flags is overwritten
> with QUEUE_FLAG_DEFAULT which doesn't include BYPASS even though the
> initial bypass is still in effect.
> 
> In blk_init_allocated_queue(), or QUEUE_FLAG_DEFAULT to q->queue_flags
> instead of overwriting.
[...]

This is not needed, as there is no QUEUE_FLAG_BYPASS in 3.0.y.

Ben.

-- 
Ben Hutchings
We get into the habit of living before acquiring the habit of thinking.
                                                              - Albert Camus

Re: [ 12/37] block: fix request_queue->flags initialization

[Greg Kroah-Hartman]

On Sat, Oct 20, 2012 at 12:16:04AM +0100, Ben Hutchings wrote:
> On Thu, Oct 18, 2012 at 08:16:35PM -0700, Greg Kroah-Hartman wrote:
> > 3.0-stable review patch.  If anyone has any objections, please let me know.
> > 
> > ------------------
> > 
> > From: Tejun Heo <tj@kernel.org>
> > 
> > commit 60ea8226cbd5c8301f9a39edc574ddabcb8150e0 upstream.
> > 
> > A queue newly allocated with blk_alloc_queue_node() has only
> > QUEUE_FLAG_BYPASS set.  For request-based drivers,
> > blk_init_allocated_queue() is called and q->queue_flags is overwritten
> > with QUEUE_FLAG_DEFAULT which doesn't include BYPASS even though the
> > initial bypass is still in effect.
> > 
> > In blk_init_allocated_queue(), or QUEUE_FLAG_DEFAULT to q->queue_flags
> > instead of overwriting.
> [...]
> 
> This is not needed, as there is no QUEUE_FLAG_BYPASS in 3.0.y.

Odd, it doesn't break the build.  And for some reason I just missed
this, does it hurt to have it applied?

greg k-h

Re: [ 12/37] block: fix request_queue->flags initialization

[Tejun Heo]

Hello, Greg.

On Sun, Oct 21, 2012 at 09:25:29AM -0700, Greg Kroah-Hartman wrote:
> > > commit 60ea8226cbd5c8301f9a39edc574ddabcb8150e0 upstream.
> > > 
> > > A queue newly allocated with blk_alloc_queue_node() has only
> > > QUEUE_FLAG_BYPASS set.  For request-based drivers,
> > > blk_init_allocated_queue() is called and q->queue_flags is overwritten
> > > with QUEUE_FLAG_DEFAULT which doesn't include BYPASS even though the
> > > initial bypass is still in effect.
> > > 
> > > In blk_init_allocated_queue(), or QUEUE_FLAG_DEFAULT to q->queue_flags
> > > instead of overwriting.
> > [...]
> > 
> > This is not needed, as there is no QUEUE_FLAG_BYPASS in 3.0.y.
> 
> Odd, it doesn't break the build.  And for some reason I just missed
> this, does it hurt to have it applied?

I don't think it will break anything as it simply changes assignment
to |= to avoid overwriting existing flags.  That said, any patch can
break anything, so if possible it would be better to drop for 3.0.y.

Thanks.

--
tejun

Re: [ 12/37] block: fix request_queue->flags initialization

[Greg Kroah-Hartman]

On Sun, Oct 21, 2012 at 11:56:18AM -0700, Tejun Heo wrote:
> Hello, Greg.
> 
> On Sun, Oct 21, 2012 at 09:25:29AM -0700, Greg Kroah-Hartman wrote:
> > > > commit 60ea8226cbd5c8301f9a39edc574ddabcb8150e0 upstream.
> > > > 
> > > > A queue newly allocated with blk_alloc_queue_node() has only
> > > > QUEUE_FLAG_BYPASS set.  For request-based drivers,
> > > > blk_init_allocated_queue() is called and q->queue_flags is overwritten
> > > > with QUEUE_FLAG_DEFAULT which doesn't include BYPASS even though the
> > > > initial bypass is still in effect.
> > > > 
> > > > In blk_init_allocated_queue(), or QUEUE_FLAG_DEFAULT to q->queue_flags
> > > > instead of overwriting.
> > > [...]
> > > 
> > > This is not needed, as there is no QUEUE_FLAG_BYPASS in 3.0.y.
> > 
> > Odd, it doesn't break the build.  And for some reason I just missed
> > this, does it hurt to have it applied?
> 
> I don't think it will break anything as it simply changes assignment
> to |= to avoid overwriting existing flags.  That said, any patch can
> break anything, so if possible it would be better to drop for 3.0.y.

Ok, I'll revert this and push out a 3.0.48 to be safe.

thanks,

greg k-h

[ 13/37] autofs4 - fix reset pending flag on mount fail

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Kent <raven@themaw.net>

commit 49999ab27eab6289a8e4f450e148bdab521361b2 upstream.

In autofs4_d_automount(), if a mount fail occurs the AUTOFS_INF_PENDING
mount pending flag is not cleared.

One effect of this is when using the "browse" option, directory entry
attributes show up with all "?"s due to the incorrect callback and
subsequent failure return (when in fact no callback should be made).

Signed-off-by: Ian Kent <ikent@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/autofs4/root.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/autofs4/root.c
+++ b/fs/autofs4/root.c
@@ -392,10 +392,12 @@ static struct vfsmount *autofs4_d_automo
 		ino->flags |= AUTOFS_INF_PENDING;
 		spin_unlock(&sbi->fs_lock);
 		status = autofs4_mount_wait(dentry);
-		if (status)
-			return ERR_PTR(status);
 		spin_lock(&sbi->fs_lock);
 		ino->flags &= ~AUTOFS_INF_PENDING;
+		if (status) {
+			spin_unlock(&sbi->fs_lock);
+			return ERR_PTR(status);
+		}
 	}
 done:
 	if (!(ino->flags & AUTOFS_INF_EXPIRING)) {

[ 14/37] module: taint kernel when lve module is loaded

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Garrett <mjg59@srcf.ucam.org>

commit c99af3752bb52ba3aece5315279a57a477edfaf1 upstream.

Cloudlinux have a product called lve that includes a kernel module. This
was previously GPLed but is now under a proprietary license, but the
module continues to declare MODULE_LICENSE("GPL") and makes use of some
EXPORT_SYMBOL_GPL symbols. Forcibly taint it in order to avoid this.

Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Alex Lyashkov <umka@cloudlinux.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/module.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/kernel/module.c
+++ b/kernel/module.c
@@ -2605,6 +2605,10 @@ static int check_module_license_and_vers
 	if (strcmp(mod->name, "driverloader") == 0)
 		add_taint_module(mod, TAINT_PROPRIETARY_MODULE);
 
+	/* lve claims to be GPL but upstream won't provide source */
+	if (strcmp(mod->name, "lve") == 0)
+		add_taint_module(mod, TAINT_PROPRIETARY_MODULE);
+
 #ifdef CONFIG_MODVERSIONS
 	if ((mod->num_syms && !mod->crcs)
 	    || (mod->num_gpl_syms && !mod->gpl_crcs)

[ 15/37] video/udlfb: fix line counting in fb_write

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Holler <holler@ahsoftware.de>

commit b8c4321f3d194469007f5f5f2b34ec278c264a04 upstream.

Line 0 and 1 were both written to line 0 (on the display) and all subsequent
lines had an offset of -1. The result was that the last line on the display
was never overwritten by writes to /dev/fbN.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Acked-by: Bernie Thompson <bernie@plugable.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/udlfb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/video/udlfb.c
+++ b/drivers/video/udlfb.c
@@ -613,7 +613,7 @@ static ssize_t dlfb_ops_write(struct fb_
 	result = fb_sys_write(info, buf, count, ppos);
 
 	if (result > 0) {
-		int start = max((int)(offset / info->fix.line_length) - 1, 0);
+		int start = max((int)(offset / info->fix.line_length), 0);
 		int lines = min((u32)((result / info->fix.line_length) + 1),
 				(u32)info->var.yres);
 

[ 16/37] viafb: dont touch clock state on OLPC XO-1.5

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Drake <dsd@laptop.org>

commit 012a1211845eab69a5488d59eb87d24cc518c627 upstream.

As detailed in the thread titled "viafb PLL/clock tweaking causes XO-1.5
instability," enabling or disabling the IGA1/IGA2 clocks causes occasional
stability problems during suspend/resume cycles on this platform.

This is rather odd, as the documentation suggests that clocks have two
states (on/off) and the default (stable) configuration is configured to
enable the clock only when it is needed. However, explicitly enabling *or*
disabling the clock triggers this system instability, suggesting that there
is a 3rd state at play here.

Leaving the clock enable/disable registers alone solves this problem.
This fixes spurious reboots during suspend/resume behaviour introduced by
commit b692a63a.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/via/via_clock.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

--- a/drivers/video/via/via_clock.c
+++ b/drivers/video/via/via_clock.c
@@ -25,6 +25,7 @@
 
 #include <linux/kernel.h>
 #include <linux/via-core.h>
+#include <asm/olpc.h>
 #include "via_clock.h"
 #include "global.h"
 #include "debug.h"
@@ -289,6 +290,10 @@ static void dummy_set_pll(struct via_pll
 	printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap);
 }
 
+static void noop_set_clock_state(u8 state)
+{
+}
+
 void via_clock_init(struct via_clock *clock, int gfx_chip)
 {
 	switch (gfx_chip) {
@@ -346,4 +351,18 @@ void via_clock_init(struct via_clock *cl
 		break;
 
 	}
+
+	if (machine_is_olpc()) {
+		/* The OLPC XO-1.5 cannot suspend/resume reliably if the
+		 * IGA1/IGA2 clocks are set as on or off (memory rot
+		 * occasionally happens during suspend under such
+		 * configurations).
+		 *
+		 * The only known stable scenario is to leave this bits as-is,
+		 * which in their default states are documented to enable the
+		 * clock only when it is needed.
+		 */
+		clock->set_primary_clock_state = noop_set_clock_state;
+		clock->set_secondary_clock_state = noop_set_clock_state;
+	}
 }

[ 17/37] timers: Fix endless looping between cascade() and internal_add_timer()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Hildner, Christian" <christian.hildner@siemens.com>

commit 26cff4e2aa4d666dc6a120ea34336b5057e3e187 upstream.

Adding two (or more) timers with large values for "expires" (they have
to reside within tv5 in the same list) leads to endless looping
between cascade() and internal_add_timer() in case CONFIG_BASE_SMALL
is one and jiffies are crossing the value 1 << 18. The bug was
introduced between 2.6.11 and 2.6.12 (and survived for quite some
time).

This patch ensures that when cascade() is called timers within tv5 are
not added endlessly to their own list again, instead they are added to
the next lower tv level tv4 (as expected).

Signed-off-by: Christian Hildner <christian.hildner@siemens.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: http://lkml.kernel.org/r/98673C87CB31274881CFFE0B65ECC87B0F5FC1963E@DEFTHW99EA4MSX.ww902.siemens.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/timer.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/kernel/timer.c
+++ b/kernel/timer.c
@@ -63,6 +63,7 @@ EXPORT_SYMBOL(jiffies_64);
 #define TVR_SIZE (1 << TVR_BITS)
 #define TVN_MASK (TVN_SIZE - 1)
 #define TVR_MASK (TVR_SIZE - 1)
+#define MAX_TVAL ((unsigned long)((1ULL << (TVR_BITS + 4*TVN_BITS)) - 1))
 
 struct tvec {
 	struct list_head vec[TVN_SIZE];
@@ -356,11 +357,12 @@ static void internal_add_timer(struct tv
 		vec = base->tv1.vec + (base->timer_jiffies & TVR_MASK);
 	} else {
 		int i;
-		/* If the timeout is larger than 0xffffffff on 64-bit
-		 * architectures then we use the maximum timeout:
+		/* If the timeout is larger than MAX_TVAL (on 64-bit
+		 * architectures or with CONFIG_BASE_SMALL=1) then we
+		 * use the maximum timeout.
 		 */
-		if (idx > 0xffffffffUL) {
-			idx = 0xffffffffUL;
+		if (idx > MAX_TVAL) {
+			idx = MAX_TVAL;
 			expires = idx + base->timer_jiffies;
 		}
 		i = (expires >> (TVR_BITS + 3 * TVN_BITS)) & TVN_MASK;

[ 18/37] pktgen: fix crash when generating IPv6 packets

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amerigo Wang <amwang@redhat.com>

commit 5aa8b572007c4bca1e6d3dd4c4820f1ae49d6bb2 upstream.

For IPv6, sizeof(struct ipv6hdr) = 40, thus the following
expression will result negative:

        datalen = pkt_dev->cur_pkt_size - 14 -
                  sizeof(struct ipv6hdr) - sizeof(struct udphdr) -
                  pkt_dev->pkt_overhead;

And,  the check "if (datalen < sizeof(struct pktgen_hdr))" will be
passed as "datalen" is promoted to unsigned, therefore will cause
a crash later.

This is a quick fix by checking if "datalen" is negative. The following
patch will increase the default value of 'min_pkt_size' for IPv6.

This bug should exist for a long time, so Cc -stable too.

Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/core/pktgen.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -2932,7 +2932,7 @@ static struct sk_buff *fill_packet_ipv6(
 		  sizeof(struct ipv6hdr) - sizeof(struct udphdr) -
 		  pkt_dev->pkt_overhead;
 
-	if (datalen < sizeof(struct pktgen_hdr)) {
+	if (datalen < 0 || datalen < sizeof(struct pktgen_hdr)) {
 		datalen = sizeof(struct pktgen_hdr);
 		if (net_ratelimit())
 			pr_info("increased datalen to %d\n", datalen);

[ 19/37] tg3: Apply short DMA frag workaround to 5906

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matt Carlson <mcarlson@broadcom.com>

commit b7abee6ef888117f92db370620ebf116a38e3f4d upstream.

5906 devices also need the short DMA fragment workaround.  This patch
makes the necessary change.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Mike Pagano <mpagano@gentoo.org>

---
 drivers/net/tg3.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -13689,8 +13689,9 @@ static int __devinit tg3_get_invariants(
 	 */
 	tg3_flag_set(tp, 4G_DMA_BNDRY_BUG);
 
-	if (tg3_flag(tp, 5755_PLUS))
-		tg3_flag_set(tp, SHORT_DMA_BUG);
+	if (tg3_flag(tp, 5755_PLUS) ||
+		GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+			tg3_flag_set(tp, SHORT_DMA_BUG);
 	else
 		tg3_flag_set(tp, 40BIT_DMA_LIMIT_BUG);
 

[ 20/37] ipvs: fix oops in ip_vs_dst_event on rmmod

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Julian Anastasov <ja@ssi.bg>

commit 283283c4da91adc44b03519f434ee1e7e91d6fdb upstream.

	After commit 39f618b4fd95ae243d940ec64c961009c74e3333 (3.4)
"ipvs: reset ipvs pointer in netns" we can oops in
ip_vs_dst_event on rmmod ip_vs because ip_vs_control_cleanup
is called after the ipvs_core_ops subsys is unregistered and
net->ipvs is NULL. Fix it by exiting early from ip_vs_dst_event
if ipvs is NULL. It is safe because all services and dests
for the net are already freed.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipvs/ip_vs_ctl.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/net/netfilter/ipvs/ip_vs_ctl.c
+++ b/net/netfilter/ipvs/ip_vs_ctl.c
@@ -1520,11 +1520,12 @@ static int ip_vs_dst_event(struct notifi
 {
 	struct net_device *dev = ptr;
 	struct net *net = dev_net(dev);
+	struct netns_ipvs *ipvs = net_ipvs(net);
 	struct ip_vs_service *svc;
 	struct ip_vs_dest *dest;
 	unsigned int idx;
 
-	if (event != NETDEV_UNREGISTER)
+	if (event != NETDEV_UNREGISTER || !ipvs)
 		return NOTIFY_DONE;
 	IP_VS_DBG(3, "%s() dev=%s\n", __func__, dev->name);
 	EnterFunction(2);
@@ -1550,7 +1551,7 @@ static int ip_vs_dst_event(struct notifi
 		}
 	}
 
-	list_for_each_entry(dest, &net_ipvs(net)->dest_trash, n_list) {
+	list_for_each_entry(dest, &ipvs->dest_trash, n_list) {
 		__ip_vs_dev_reset(dest, dev);
 	}
 	mutex_unlock(&__ip_vs_mutex);

[ 21/37] netfilter: nf_conntrack: fix racy timer handling with reliable events

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 5b423f6a40a0327f9d40bc8b97ce9be266f74368 upstream.

Existing code assumes that del_timer returns true for alive conntrack
entries. However, this is not true if reliable events are enabled.
In that case, del_timer may return true for entries that were
just inserted in the dying list. Note that packets / ctnetlink may
hold references to conntrack entries that were just inserted to such
list.

This patch fixes the issue by adding an independent timer for
event delivery. This increases the size of the ecache extension.
Still we can revisit this later and use variable size extensions
to allocate this area on demand.

Tested-by: Oliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/netfilter/nf_conntrack_ecache.h |    1 +
 net/netfilter/nf_conntrack_core.c           |   16 +++++++++++-----
 2 files changed, 12 insertions(+), 5 deletions(-)

--- a/include/net/netfilter/nf_conntrack_ecache.h
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -18,6 +18,7 @@ struct nf_conntrack_ecache {
 	u16 ctmask;		/* bitmask of ct events to be delivered */
 	u16 expmask;		/* bitmask of expect events to be delivered */
 	u32 pid;		/* netlink pid of destroyer */
+	struct timer_list timeout;
 };
 
 static inline struct nf_conntrack_ecache *
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -247,12 +247,15 @@ static void death_by_event(unsigned long
 {
 	struct nf_conn *ct = (void *)ul_conntrack;
 	struct net *net = nf_ct_net(ct);
+	struct nf_conntrack_ecache *ecache = nf_ct_ecache_find(ct);
+
+	BUG_ON(ecache == NULL);
 
 	if (nf_conntrack_event(IPCT_DESTROY, ct) < 0) {
 		/* bad luck, let's retry again */
-		ct->timeout.expires = jiffies +
+		ecache->timeout.expires = jiffies +
 			(random32() % net->ct.sysctl_events_retry_timeout);
-		add_timer(&ct->timeout);
+		add_timer(&ecache->timeout);
 		return;
 	}
 	/* we've got the event delivered, now it's dying */
@@ -266,6 +269,9 @@ static void death_by_event(unsigned long
 void nf_ct_insert_dying_list(struct nf_conn *ct)
 {
 	struct net *net = nf_ct_net(ct);
+	struct nf_conntrack_ecache *ecache = nf_ct_ecache_find(ct);
+
+	BUG_ON(ecache == NULL);
 
 	/* add this conntrack to the dying list */
 	spin_lock_bh(&nf_conntrack_lock);
@@ -273,10 +279,10 @@ void nf_ct_insert_dying_list(struct nf_c
 			     &net->ct.dying);
 	spin_unlock_bh(&nf_conntrack_lock);
 	/* set a new timer to retry event delivery */
-	setup_timer(&ct->timeout, death_by_event, (unsigned long)ct);
-	ct->timeout.expires = jiffies +
+	setup_timer(&ecache->timeout, death_by_event, (unsigned long)ct);
+	ecache->timeout.expires = jiffies +
 		(random32() % net->ct.sysctl_events_retry_timeout);
-	add_timer(&ct->timeout);
+	add_timer(&ecache->timeout);
 }
 EXPORT_SYMBOL_GPL(nf_ct_insert_dying_list);
 

[ 22/37] netfilter: nf_ct_ipv4: packets with wrong ihl are invalid

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>

commit 07153c6ec074257ade76a461429b567cff2b3a1e upstream.

It was reported that the Linux kernel sometimes logs:

klogd: [2629147.402413] kernel BUG at net / netfilter /
nf_conntrack_proto_tcp.c: 447!
klogd: [1072212.887368] kernel BUG at net / netfilter /
nf_conntrack_proto_tcp.c: 392

ipv4_get_l4proto() in nf_conntrack_l3proto_ipv4.c and tcp_error() in
nf_conntrack_proto_tcp.c should catch malformed packets, so the errors
at the indicated lines - TCP options parsing - should not happen.
However, tcp_error() relies on the "dataoff" offset to the TCP header,
calculated by ipv4_get_l4proto().  But ipv4_get_l4proto() does not check
bogus ihl values in IPv4 packets, which then can slip through tcp_error()
and get caught at the TCP options parsing routines.

The patch fixes ipv4_get_l4proto() by invalidating packets with bogus
ihl value.

The patch closes netfilter bugzilla id 771.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -84,6 +84,14 @@ static int ipv4_get_l4proto(const struct
 	*dataoff = nhoff + (iph->ihl << 2);
 	*protonum = iph->protocol;
 
+	/* Check bogus IP headers */
+	if (*dataoff > skb->len) {
+		pr_debug("nf_conntrack_ipv4: bogus IPv4 packet: "
+			 "nhoff %u, ihl %u, skblen %u\n",
+			 nhoff, iph->ihl << 2, skb->len);
+		return -NF_ACCEPT;
+	}
+
 	return NF_ACCEPT;
 }
 

[ 23/37] netfilter: nf_nat_sip: fix incorrect handling of EBUSY for RTCP expectation

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 3f509c689a07a4aa989b426893d8491a7ffcc410 upstream.

We're hitting bug while trying to reinsert an already existing
expectation:

kernel BUG at kernel/timer.c:895!
invalid opcode: 0000 [#1] SMP
[...]
Call Trace:
 <IRQ>
 [<ffffffffa0069563>] nf_ct_expect_related_report+0x4a0/0x57a [nf_conntrack]
 [<ffffffff812d423a>] ? in4_pton+0x72/0x131
 [<ffffffffa00ca69e>] ip_nat_sdp_media+0xeb/0x185 [nf_nat_sip]
 [<ffffffffa00b5b9b>] set_expected_rtp_rtcp+0x32d/0x39b [nf_conntrack_sip]
 [<ffffffffa00b5f15>] process_sdp+0x30c/0x3ec [nf_conntrack_sip]
 [<ffffffff8103f1eb>] ? irq_exit+0x9a/0x9c
 [<ffffffffa00ca738>] ? ip_nat_sdp_media+0x185/0x185 [nf_nat_sip]

We have to remove the RTP expectation if the RTCP expectation hits EBUSY
since we keep trying with other ports until we succeed.

Reported-by: Rafal Fitt <rafalf@aplusc.com.pl>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/netfilter/nf_nat_sip.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/net/ipv4/netfilter/nf_nat_sip.c
+++ b/net/ipv4/netfilter/nf_nat_sip.c
@@ -501,7 +501,10 @@ static unsigned int ip_nat_sdp_media(str
 		ret = nf_ct_expect_related(rtcp_exp);
 		if (ret == 0)
 			break;
-		else if (ret != -EBUSY) {
+		else if (ret == -EBUSY) {
+			nf_ct_unexpect_related(rtp_exp);
+			continue;
+		} else if (ret < 0) {
 			nf_ct_unexpect_related(rtp_exp);
 			port = 0;
 			break;

[ 24/37] ipvs: fix oops on NAT reply in br_nf context

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lin Ming <mlin@ss.pku.edu.cn>

commit 9e33ce453f8ac8452649802bee1f410319408f4b upstream.

IPVS should not reset skb->nf_bridge in FORWARD hook
by calling nf_reset for NAT replies. It triggers oops in
br_nf_forward_finish.

[  579.781508] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[  579.781669] IP: [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.781792] PGD 218f9067 PUD 0
[  579.781865] Oops: 0000 [#1] SMP
[  579.781945] CPU 0
[  579.781983] Modules linked in:
[  579.782047]
[  579.782080]
[  579.782114] Pid: 4644, comm: qemu Tainted: G        W    3.5.0-rc5-00006-g95e69f9 #282 Hewlett-Packard  /30E8
[  579.782300] RIP: 0010:[<ffffffff817b1ca5>]  [<ffffffff817b1ca5>] br_nf_forward_finish+0x58/0x112
[  579.782455] RSP: 0018:ffff88007b003a98  EFLAGS: 00010287
[  579.782541] RAX: 0000000000000008 RBX: ffff8800762ead00 RCX: 000000000001670a
[  579.782653] RDX: 0000000000000000 RSI: 000000000000000a RDI: ffff8800762ead00
[  579.782845] RBP: ffff88007b003ac8 R08: 0000000000016630 R09: ffff88007b003a90
[  579.782957] R10: ffff88007b0038e8 R11: ffff88002da37540 R12: ffff88002da01a02
[  579.783066] R13: ffff88002da01a80 R14: ffff88002d83c000 R15: ffff88002d82a000
[  579.783177] FS:  0000000000000000(0000) GS:ffff88007b000000(0063) knlGS:00000000f62d1b70
[  579.783306] CS:  0010 DS: 002b ES: 002b CR0: 000000008005003b
[  579.783395] CR2: 0000000000000004 CR3: 00000000218fe000 CR4: 00000000000027f0
[  579.783505] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  579.783684] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  579.783795] Process qemu (pid: 4644, threadinfo ffff880021b20000, task ffff880021aba760)
[  579.783919] Stack:
[  579.783959]  ffff88007693cedc ffff8800762ead00 ffff88002da01a02 ffff8800762ead00
[  579.784110]  ffff88002da01a02 ffff88002da01a80 ffff88007b003b18 ffffffff817b26c7
[  579.784260]  ffff880080000000 ffffffff81ef59f0 ffff8800762ead00 ffffffff81ef58b0
[  579.784477] Call Trace:
[  579.784523]  <IRQ>
[  579.784562]
[  579.784603]  [<ffffffff817b26c7>] br_nf_forward_ip+0x275/0x2c8
[  579.784707]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.784797]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.784906]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.784995]  [<ffffffff817ac32e>] ? br_dev_queue_push_xmit+0xae/0xae
[  579.785175]  [<ffffffff8187fa95>] ? _raw_write_unlock_bh+0x19/0x1b
[  579.785179]  [<ffffffff817ac417>] __br_forward+0x97/0xa2
[  579.785179]  [<ffffffff817ad366>] br_handle_frame_finish+0x1a6/0x257
[  579.785179]  [<ffffffff817b2386>] br_nf_pre_routing_finish+0x26d/0x2cb
[  579.785179]  [<ffffffff817b2cf0>] br_nf_pre_routing+0x55d/0x5c1
[  579.785179]  [<ffffffff81704b58>] nf_iterate+0x47/0x7d
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81704bfb>] nf_hook_slow+0x6d/0x102
[  579.785179]  [<ffffffff817ad1c0>] ? br_handle_local_finish+0x44/0x44
[  579.785179]  [<ffffffff81551525>] ? sky2_poll+0xb35/0xb54
[  579.785179]  [<ffffffff817ad62a>] br_handle_frame+0x213/0x229
[  579.785179]  [<ffffffff817ad417>] ? br_handle_frame_finish+0x257/0x257
[  579.785179]  [<ffffffff816e3b47>] __netif_receive_skb+0x2b4/0x3f1
[  579.785179]  [<ffffffff816e69fc>] process_backlog+0x99/0x1e2
[  579.785179]  [<ffffffff816e6800>] net_rx_action+0xdf/0x242
[  579.785179]  [<ffffffff8107e8a8>] __do_softirq+0xc1/0x1e0
[  579.785179]  [<ffffffff8135a5ba>] ? trace_hardirqs_off_thunk+0x3a/0x6c
[  579.785179]  [<ffffffff8188812c>] call_softirq+0x1c/0x30

The steps to reproduce as follow,

1. On Host1, setup brige br0(192.168.1.106)
2. Boot a kvm guest(192.168.1.105) on Host1 and start httpd
3. Start IPVS service on Host1
   ipvsadm -A -t 192.168.1.106:80 -s rr
   ipvsadm -a -t 192.168.1.106:80 -r 192.168.1.105:80 -m
4. Run apache benchmark on Host2(192.168.1.101)
   ab -n 1000 http://192.168.1.106/

ip_vs_reply4
  ip_vs_out
    handle_response
      ip_vs_notrack
        nf_reset()
        {
          skb->nf_bridge = NULL;
        }

Actually, IPVS wants in this case just to replace nfct
with untracked version. So replace the nf_reset(skb) call
in ip_vs_notrack() with a nf_conntrack_put(skb->nfct) call.

Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/net/ip_vs.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -1361,7 +1361,7 @@ static inline void ip_vs_notrack(struct
 	struct nf_conn *ct = nf_ct_get(skb, &ctinfo);
 
 	if (!ct || !nf_ct_is_untracked(ct)) {
-		nf_reset(skb);
+		nf_conntrack_put(skb->nfct);
 		skb->nfct = &nf_ct_untracked_get()->ct_general;
 		skb->nfctinfo = IP_CT_NEW;
 		nf_conntrack_get(skb->nfct);

[ 25/37] netfilter: nf_nat_sip: fix via header translation with multiple parameters

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Patrick McHardy <kaber@trash.net>

commit f22eb25cf5b1157b29ef88c793b71972efc47143 upstream.

Via-headers are parsed beginning at the first character after the Via-address.
When the address is translated first and its length decreases, the offset to
start parsing at is incorrect and header parameters might be missed.

Update the offset after translating the Via-address to fix this.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ipv4/netfilter/nf_nat_sip.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/net/ipv4/netfilter/nf_nat_sip.c
+++ b/net/ipv4/netfilter/nf_nat_sip.c
@@ -148,7 +148,7 @@ static unsigned int ip_nat_sip(struct sk
 	if (ct_sip_parse_header_uri(ct, *dptr, NULL, *datalen,
 				    hdr, NULL, &matchoff, &matchlen,
 				    &addr, &port) > 0) {
-		unsigned int matchend, poff, plen, buflen, n;
+		unsigned int olen, matchend, poff, plen, buflen, n;
 		char buffer[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
 
 		/* We're only interested in headers related to this
@@ -163,11 +163,12 @@ static unsigned int ip_nat_sip(struct sk
 				goto next;
 		}
 
+		olen = *datalen;
 		if (!map_addr(skb, dataoff, dptr, datalen, matchoff, matchlen,
 			      &addr, port))
 			return NF_DROP;
 
-		matchend = matchoff + matchlen;
+		matchend = matchoff + matchlen + *datalen - olen;
 
 		/* The maddr= parameter (RFC 2361) specifies where to send
 		 * the reply. */

[ 26/37] netfilter: nf_ct_expect: fix possible access to uninitialized timer

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 2614f86490122bf51eb7c12ec73927f1900f4e7d upstream.

In __nf_ct_expect_check, the function refresh_timer returns 1
if a matching expectation is found and its timer is successfully
refreshed. This results in nf_ct_expect_related returning 0.
Note that at this point:

- the passed expectation is not inserted in the expectation table
  and its timer was not initialized, since we have refreshed one
  matching/existing expectation.

- nf_ct_expect_alloc uses kmem_cache_alloc, so the expectation
  timer is in some undefined state just after the allocation,
  until it is appropriately initialized.

This can be a problem for the SIP helper during the expectation
addition:

 ...
 if (nf_ct_expect_related(rtp_exp) == 0) {
         if (nf_ct_expect_related(rtcp_exp) != 0)
                 nf_ct_unexpect_related(rtp_exp);
 ...

Note that nf_ct_expect_related(rtp_exp) may return 0 for the timer refresh
case that is detailed above. Then, if nf_ct_unexpect_related(rtcp_exp)
returns != 0, nf_ct_unexpect_related(rtp_exp) is called, which does:

 spin_lock_bh(&nf_conntrack_lock);
 if (del_timer(&exp->timeout)) {
         nf_ct_unlink_expect(exp);
         nf_ct_expect_put(exp);
 }
 spin_unlock_bh(&nf_conntrack_lock);

Note that del_timer always returns false if the timer has been
initialized.  However, the timer was not initialized since setup_timer
was not called, therefore, the expectation timer remains in some
undefined state. If I'm not missing anything, this may lead to the
removal an unexistent expectation.

To fix this, the optimization that allows refreshing an expectation
is removed. Now nf_conntrack_expect_related looks more consistent
to me since it always add the expectation in case that it returns
success.

Thanks to Patrick McHardy for participating in the discussion of
this patch.

I think this may be the source of the problem described by:
http://marc.info/?l=netfilter-devel&m=134073514719421&w=2

Reported-by: Rafal Fitt <rafalf@aplusc.com.pl>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nf_conntrack_expect.c |   29 ++++++-----------------------
 1 file changed, 6 insertions(+), 23 deletions(-)

--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -364,23 +364,6 @@ static void evict_oldest_expect(struct n
 	}
 }
 
-static inline int refresh_timer(struct nf_conntrack_expect *i)
-{
-	struct nf_conn_help *master_help = nfct_help(i->master);
-	const struct nf_conntrack_expect_policy *p;
-
-	if (!del_timer(&i->timeout))
-		return 0;
-
-	p = &rcu_dereference_protected(
-		master_help->helper,
-		lockdep_is_held(&nf_conntrack_lock)
-		)->expect_policy[i->class];
-	i->timeout.expires = jiffies + p->timeout * HZ;
-	add_timer(&i->timeout);
-	return 1;
-}
-
 static inline int __nf_ct_expect_check(struct nf_conntrack_expect *expect)
 {
 	const struct nf_conntrack_expect_policy *p;
@@ -388,7 +371,7 @@ static inline int __nf_ct_expect_check(s
 	struct nf_conn *master = expect->master;
 	struct nf_conn_help *master_help = nfct_help(master);
 	struct net *net = nf_ct_exp_net(expect);
-	struct hlist_node *n;
+	struct hlist_node *n, *next;
 	unsigned int h;
 	int ret = 1;
 
@@ -399,12 +382,12 @@ static inline int __nf_ct_expect_check(s
 		goto out;
 	}
 	h = nf_ct_expect_dst_hash(&expect->tuple);
-	hlist_for_each_entry(i, n, &net->ct.expect_hash[h], hnode) {
+	hlist_for_each_entry_safe(i, n, next, &net->ct.expect_hash[h], hnode) {
 		if (expect_matches(i, expect)) {
-			/* Refresh timer: if it's dying, ignore.. */
-			if (refresh_timer(i)) {
-				ret = 0;
-				goto out;
+			if (del_timer(&i->timeout)) {
+				nf_ct_unlink_expect(i);
+				nf_ct_expect_put(i);
+				break;
 			}
 		} else if (expect_clash(i, expect)) {
 			ret = -EBUSY;

[ 27/37] netfilter: limit, hashlimit: avoid duplicated inline

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Florian Westphal <fw@strlen.de>

commit 7a909ac70f6b0823d9f23a43f19598d4b57ac901 upstream.

credit_cap can be set to credit, which avoids inlining user2credits
twice. Also, remove inline keyword and let compiler decide.

old:
    684     192       0     876     36c net/netfilter/xt_limit.o
   4927     344      32    5303    14b7 net/netfilter/xt_hashlimit.o
now:
    668     192       0     860     35c net/netfilter/xt_limit.o
   4793     344      32    5169    1431 net/netfilter/xt_hashlimit.o

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/xt_hashlimit.c |    8 +++-----
 net/netfilter/xt_limit.c     |    5 ++---
 2 files changed, 5 insertions(+), 8 deletions(-)

--- a/net/netfilter/xt_hashlimit.c
+++ b/net/netfilter/xt_hashlimit.c
@@ -392,8 +392,7 @@ static void htable_put(struct xt_hashlim
 #define CREDITS_PER_JIFFY POW2_BELOW32(MAX_CPJ)
 
 /* Precision saver. */
-static inline u_int32_t
-user2credits(u_int32_t user)
+static u32 user2credits(u32 user)
 {
 	/* If multiplying would overflow... */
 	if (user > 0xFFFFFFFF / (HZ*CREDITS_PER_JIFFY))
@@ -403,7 +402,7 @@ user2credits(u_int32_t user)
 	return (user * HZ * CREDITS_PER_JIFFY) / XT_HASHLIMIT_SCALE;
 }
 
-static inline void rateinfo_recalc(struct dsthash_ent *dh, unsigned long now)
+static void rateinfo_recalc(struct dsthash_ent *dh, unsigned long now)
 {
 	dh->rateinfo.credit += (now - dh->rateinfo.prev) * CREDITS_PER_JIFFY;
 	if (dh->rateinfo.credit > dh->rateinfo.credit_cap)
@@ -534,8 +533,7 @@ hashlimit_mt(const struct sk_buff *skb,
 		dh->rateinfo.prev = jiffies;
 		dh->rateinfo.credit = user2credits(hinfo->cfg.avg *
 		                      hinfo->cfg.burst);
-		dh->rateinfo.credit_cap = user2credits(hinfo->cfg.avg *
-		                          hinfo->cfg.burst);
+		dh->rateinfo.credit_cap = dh->rateinfo.credit;
 		dh->rateinfo.cost = user2credits(hinfo->cfg.avg);
 	} else {
 		/* update expiration timeout */
--- a/net/netfilter/xt_limit.c
+++ b/net/netfilter/xt_limit.c
@@ -88,8 +88,7 @@ limit_mt(const struct sk_buff *skb, stru
 }
 
 /* Precision saver. */
-static u_int32_t
-user2credits(u_int32_t user)
+static u32 user2credits(u32 user)
 {
 	/* If multiplying would overflow... */
 	if (user > 0xFFFFFFFF / (HZ*CREDITS_PER_JIFFY))
@@ -123,7 +122,7 @@ static int limit_mt_check(const struct x
 		   128. */
 		priv->prev = jiffies;
 		priv->credit = user2credits(r->avg * r->burst); /* Credits full. */
-		r->credit_cap = user2credits(r->avg * r->burst); /* Credits full. */
+		r->credit_cap = priv->credit; /* Credits full. */
 		r->cost = user2credits(r->avg);
 	}
 	return 0;

[ 28/37] netfilter: xt_limit: have r->cost != 0 case work

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Engelhardt <jengelh@inai.de>

commit 82e6bfe2fbc4d48852114c4f979137cd5bf1d1a8 upstream.

Commit v2.6.19-rc1~1272^2~41 tells us that r->cost != 0 can happen when
a running state is saved to userspace and then reinstated from there.

Make sure that private xt_limit area is initialized with correct values.
Otherwise, random matchings due to use of uninitialized memory.

Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/xt_limit.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/net/netfilter/xt_limit.c
+++ b/net/netfilter/xt_limit.c
@@ -117,11 +117,11 @@ static int limit_mt_check(const struct x
 
 	/* For SMP, we only want to use one set of state. */
 	r->master = priv;
+	/* User avg in seconds * XT_LIMIT_SCALE: convert to jiffies *
+	   128. */
+	priv->prev = jiffies;
+	priv->credit = user2credits(r->avg * r->burst); /* Credits full. */
 	if (r->cost == 0) {
-		/* User avg in seconds * XT_LIMIT_SCALE: convert to jiffies *
-		   128. */
-		priv->prev = jiffies;
-		priv->credit = user2credits(r->avg * r->burst); /* Credits full. */
 		r->credit_cap = priv->credit; /* Credits full. */
 		r->cost = user2credits(r->avg);
 	}

[ 29/37] Add CDC-ACM support for the CX93010-2x UCMxx USB Modem

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jean-Christian de Rivaz <jc@eclis.ch>

commit e7d491a19d3e3aac544070293891a2542ae0c565 upstream.

This USB V.92/V.32bis Controllered Modem have the USB vendor ID 0x0572
and device ID 0x1340. It need the NO_UNION_NORMAL quirk to be recognized.

Reference:
http://www.conexant.com/servlets/DownloadServlet/DSH-201723-005.pdf?docid=1725&revid=5
See idVendor and idProduct in table 6-1. Device Descriptors

Signed-off-by: Jean-Christian de Rivaz <jc@eclis.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/usb/class/cdc-acm.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1496,6 +1496,9 @@ static const struct usb_device_id acm_id
 					   Maybe we should define a new
 					   quirk for this. */
 	},
+	{ USB_DEVICE(0x0572, 0x1340), /* Conexant CX93010-2x UCMxx */
+	.driver_info = NO_UNION_NORMAL,
+	},
 	{ USB_DEVICE(0x1bbb, 0x0003), /* Alcatel OT-I650 */
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},

[ 30/37] drm/radeon: Dont destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy().

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Egbert Eich <eich@suse.de>

commit 082918471139b07964967cfe5f70230909c82ae1 upstream.

radeon_i2c_fini() walks thru the list of I2C bus recs rdev->i2c_bus[]
to destroy each of them.
radeon_ext_tmds_enc_destroy() however also has code to destroy it's
associated I2C bus rec which has been obtained by radeon_i2c_lookup()
and is therefore also in the i2c_bus[] list.
This causes a double free resulting in a kernel panic when unloading
the radeon driver.
Removing destroy code from radeon_ext_tmds_enc_destroy() fixes this
problem.

agd5f: fix compiler warning

Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_legacy_encoders.c |    6 +-----
 1 file changed, 1 insertion(+), 5 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -973,11 +973,7 @@ static void radeon_legacy_tmds_ext_mode_
 static void radeon_ext_tmds_enc_destroy(struct drm_encoder *encoder)
 {
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_encoder_ext_tmds *tmds = radeon_encoder->enc_priv;
-	if (tmds) {
-		if (tmds->i2c_bus)
-			radeon_i2c_destroy(tmds->i2c_bus);
-	}
+	/* don't destroy the i2c bus record here, this will be done in radeon_i2c_fini */
 	kfree(radeon_encoder->enc_priv);
 	drm_encoder_cleanup(encoder);
 	kfree(radeon_encoder);

[ 31/37] jbd: Fix assertion failure in commit code due to lacking transaction credits

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 09e05d4805e6c524c1af74e524e5d0528bb3fef3 upstream.

ext3 users of data=journal mode with blocksize < pagesize were occasionally
hitting assertion failure in journal_commit_transaction() checking whether the
transaction has at least as many credits reserved as buffers attached.  The
core of the problem is that when a file gets truncated, buffers that still need
checkpointing or that are attached to the committing transaction are left with
buffer_mapped set. When this happens to buffers beyond i_size attached to a
page stradding i_size, subsequent write extending the file will see these
buffers and as they are mapped (but underlying blocks were freed) things go
awry from here.

The assertion failure just coincidentally (and in this case luckily as we would
start corrupting filesystem) triggers due to journal_head not being properly
cleaned up as well.

Under some rare circumstances this bug could even hit data=ordered mode users.
There the assertion won't trigger and we would end up corrupting the
filesystem.

We fix the problem by unmapping buffers if possible (in lots of cases we just
need a buffer attached to a transaction as a place holder but it must not be
written out anyway). And in one case, we just have to bite the bullet and wait
for transaction commit to finish.

Reviewed-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/jbd/commit.c      |   45 +++++++++++++++++++++++++++--------
 fs/jbd/transaction.c |   64 +++++++++++++++++++++++++++++++++++----------------
 2 files changed, 78 insertions(+), 31 deletions(-)

--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -85,7 +85,12 @@ nope:
 static void release_data_buffer(struct buffer_head *bh)
 {
 	if (buffer_freed(bh)) {
+		WARN_ON_ONCE(buffer_dirty(bh));
 		clear_buffer_freed(bh);
+		clear_buffer_mapped(bh);
+		clear_buffer_new(bh);
+		clear_buffer_req(bh);
+		bh->b_bdev = NULL;
 		release_buffer_page(bh);
 	} else
 		put_bh(bh);
@@ -840,17 +845,35 @@ restart_loop:
 		 * there's no point in keeping a checkpoint record for
 		 * it. */
 
-		/* A buffer which has been freed while still being
-		 * journaled by a previous transaction may end up still
-		 * being dirty here, but we want to avoid writing back
-		 * that buffer in the future after the "add to orphan"
-		 * operation been committed,  That's not only a performance
-		 * gain, it also stops aliasing problems if the buffer is
-		 * left behind for writeback and gets reallocated for another
-		 * use in a different page. */
-		if (buffer_freed(bh) && !jh->b_next_transaction) {
-			clear_buffer_freed(bh);
-			clear_buffer_jbddirty(bh);
+		/*
+		 * A buffer which has been freed while still being journaled by
+		 * a previous transaction.
+		 */
+		if (buffer_freed(bh)) {
+			/*
+			 * If the running transaction is the one containing
+			 * "add to orphan" operation (b_next_transaction !=
+			 * NULL), we have to wait for that transaction to
+			 * commit before we can really get rid of the buffer.
+			 * So just clear b_modified to not confuse transaction
+			 * credit accounting and refile the buffer to
+			 * BJ_Forget of the running transaction. If the just
+			 * committed transaction contains "add to orphan"
+			 * operation, we can completely invalidate the buffer
+			 * now. We are rather throughout in that since the
+			 * buffer may be still accessible when blocksize <
+			 * pagesize and it is attached to the last partial
+			 * page.
+			 */
+			jh->b_modified = 0;
+			if (!jh->b_next_transaction) {
+				clear_buffer_freed(bh);
+				clear_buffer_jbddirty(bh);
+				clear_buffer_mapped(bh);
+				clear_buffer_new(bh);
+				clear_buffer_req(bh);
+				bh->b_bdev = NULL;
+			}
 		}
 
 		if (buffer_jbddirty(bh)) {
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -1837,15 +1837,16 @@ static int __dispose_buffer(struct journ
  * We're outside-transaction here.  Either or both of j_running_transaction
  * and j_committing_transaction may be NULL.
  */
-static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh)
+static int journal_unmap_buffer(journal_t *journal, struct buffer_head *bh,
+				int partial_page)
 {
 	transaction_t *transaction;
 	struct journal_head *jh;
 	int may_free = 1;
-	int ret;
 
 	BUFFER_TRACE(bh, "entry");
 
+retry:
 	/*
 	 * It is safe to proceed here without the j_list_lock because the
 	 * buffers cannot be stolen by try_to_free_buffers as long as we are
@@ -1873,10 +1874,18 @@ static int journal_unmap_buffer(journal_
 	 * clear the buffer dirty bit at latest at the moment when the
 	 * transaction marking the buffer as freed in the filesystem
 	 * structures is committed because from that moment on the
-	 * buffer can be reallocated and used by a different page.
+	 * block can be reallocated and used by a different page.
 	 * Since the block hasn't been freed yet but the inode has
 	 * already been added to orphan list, it is safe for us to add
 	 * the buffer to BJ_Forget list of the newest transaction.
+	 *
+	 * Also we have to clear buffer_mapped flag of a truncated buffer
+	 * because the buffer_head may be attached to the page straddling
+	 * i_size (can happen only when blocksize < pagesize) and thus the
+	 * buffer_head can be reused when the file is extended again. So we end
+	 * up keeping around invalidated buffers attached to transactions'
+	 * BJ_Forget list just to stop checkpointing code from cleaning up
+	 * the transaction this buffer was modified in.
 	 */
 	transaction = jh->b_transaction;
 	if (transaction == NULL) {
@@ -1903,13 +1912,9 @@ static int journal_unmap_buffer(journal_
 			 * committed, the buffer won't be needed any
 			 * longer. */
 			JBUFFER_TRACE(jh, "checkpointed: add to BJ_Forget");
-			ret = __dispose_buffer(jh,
+			may_free = __dispose_buffer(jh,
 					journal->j_running_transaction);
-			journal_put_journal_head(jh);
-			spin_unlock(&journal->j_list_lock);
-			jbd_unlock_bh_state(bh);
-			spin_unlock(&journal->j_state_lock);
-			return ret;
+			goto zap_buffer;
 		} else {
 			/* There is no currently-running transaction. So the
 			 * orphan record which we wrote for this file must have
@@ -1917,13 +1922,9 @@ static int journal_unmap_buffer(journal_
 			 * the committing transaction, if it exists. */
 			if (journal->j_committing_transaction) {
 				JBUFFER_TRACE(jh, "give to committing trans");
-				ret = __dispose_buffer(jh,
+				may_free = __dispose_buffer(jh,
 					journal->j_committing_transaction);
-				journal_put_journal_head(jh);
-				spin_unlock(&journal->j_list_lock);
-				jbd_unlock_bh_state(bh);
-				spin_unlock(&journal->j_state_lock);
-				return ret;
+				goto zap_buffer;
 			} else {
 				/* The orphan record's transaction has
 				 * committed.  We can cleanse this buffer */
@@ -1944,10 +1945,24 @@ static int journal_unmap_buffer(journal_
 		}
 		/*
 		 * The buffer is committing, we simply cannot touch
-		 * it. So we just set j_next_transaction to the
-		 * running transaction (if there is one) and mark
-		 * buffer as freed so that commit code knows it should
-		 * clear dirty bits when it is done with the buffer.
+		 * it. If the page is straddling i_size we have to wait
+		 * for commit and try again.
+		 */
+		if (partial_page) {
+			tid_t tid = journal->j_committing_transaction->t_tid;
+
+			journal_put_journal_head(jh);
+			spin_unlock(&journal->j_list_lock);
+			jbd_unlock_bh_state(bh);
+			spin_unlock(&journal->j_state_lock);
+			log_wait_commit(journal, tid);
+			goto retry;
+		}
+		/*
+		 * OK, buffer won't be reachable after truncate. We just set
+		 * j_next_transaction to the running transaction (if there is
+		 * one) and mark buffer as freed so that commit code knows it
+		 * should clear dirty bits when it is done with the buffer.
 		 */
 		set_buffer_freed(bh);
 		if (journal->j_running_transaction && buffer_jbddirty(bh))
@@ -1970,6 +1985,14 @@ static int journal_unmap_buffer(journal_
 	}
 
 zap_buffer:
+	/*
+	 * This is tricky. Although the buffer is truncated, it may be reused
+	 * if blocksize < pagesize and it is attached to the page straddling
+	 * EOF. Since the buffer might have been added to BJ_Forget list of the
+	 * running transaction, journal_get_write_access() won't clear
+	 * b_modified and credit accounting gets confused. So clear b_modified
+	 * here. */
+	jh->b_modified = 0;
 	journal_put_journal_head(jh);
 zap_buffer_no_jh:
 	spin_unlock(&journal->j_list_lock);
@@ -2018,7 +2041,8 @@ void journal_invalidatepage(journal_t *j
 		if (offset <= curr_off) {
 			/* This block is wholly outside the truncation point */
 			lock_buffer(bh);
-			may_free &= journal_unmap_buffer(journal, bh);
+			may_free &= journal_unmap_buffer(journal, bh,
+							 offset > 0);
 			unlock_buffer(bh);
 		}
 		curr_off = next_off;

[ 32/37] x86, random: Architectural inlines to get random integers with RDRAND

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@zytor.com>

commit 628c6246d47b85f5357298601df2444d7f4dd3fd upstream.

Architectural inlines to get random ints and longs using the RDRAND
instruction.

Intel has introduced a new RDRAND instruction, a Digital Random Number
Generator (DRNG), which is functionally an high bandwidth entropy
source, cryptographic whitener, and integrity monitor all built into
hardware.  This enables RDRAND to be used directly, bypassing the
kernel random number pool.

For technical documentation, see:

http://software.intel.com/en-us/articles/download-the-latest-bull-mountain-software-implementation-guide/

In this patch, this is *only* used for the nonblocking random number
pool.  RDRAND is a nonblocking source, similar to our /dev/urandom,
and is therefore not a direct replacement for /dev/random.  The
architectural hooks presented in the previous patch only feed the
kernel internal users, which only use the nonblocking pool, and so
this is not a problem.

Since this instruction is available in userspace, there is no reason
to have a /dev/hw_rng device driver for the purpose of feeding rngd.
This is especially so since RDRAND is a nonblocking source, and needs
additional whitening and reduction (see the above technical
documentation for details) in order to be of "pure entropy source"
quality.

The CONFIG_EXPERT compile-time option can be used to disable this use
of RDRAND.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Originally-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/Kconfig                  |    9 ++++
 arch/x86/include/asm/archrandom.h |   73 ++++++++++++++++++++++++++++++++++++++
 2 files changed, 82 insertions(+)

--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -1451,6 +1451,15 @@ config ARCH_USES_PG_UNCACHED
 	def_bool y
 	depends on X86_PAT
 
+config ARCH_RANDOM
+	def_bool y
+	prompt "x86 architectural random number generator" if EXPERT
+	---help---
+	  Enable the x86 architectural RDRAND instruction
+	  (Intel Bull Mountain technology) to generate random numbers.
+	  If supported, this is a high bandwidth, cryptographically
+	  secure hardware random number generator.
+
 config EFI
 	bool "EFI runtime service support"
 	depends on ACPI
--- /dev/null
+++ b/arch/x86/include/asm/archrandom.h
@@ -0,0 +1,73 @@
+/*
+ * This file is part of the Linux kernel.
+ *
+ * Copyright (c) 2011, Intel Corporation
+ * Authors: Fenghua Yu <fenghua.yu@intel.com>,
+ *          H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef ASM_X86_ARCHRANDOM_H
+#define ASM_X86_ARCHRANDOM_H
+
+#include <asm/processor.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative.h>
+#include <asm/nops.h>
+
+#define RDRAND_RETRY_LOOPS	10
+
+#define RDRAND_INT	".byte 0x0f,0xc7,0xf0"
+#ifdef CONFIG_X86_64
+# define RDRAND_LONG	".byte 0x48,0x0f,0xc7,0xf0"
+#else
+# define RDRAND_LONG	RDRAND_INT
+#endif
+
+#ifdef CONFIG_ARCH_RANDOM
+
+#define GET_RANDOM(name, type, rdrand, nop)			\
+static inline int name(type *v)					\
+{								\
+	int ok;							\
+	alternative_io("movl $0, %0\n\t"			\
+		       nop,					\
+		       "\n1: " rdrand "\n\t"			\
+		       "jc 2f\n\t"				\
+		       "decl %0\n\t"                            \
+		       "jnz 1b\n\t"                             \
+		       "2:",                                    \
+		       X86_FEATURE_RDRAND,                      \
+		       ASM_OUTPUT2("=r" (ok), "=a" (*v)),       \
+		       "0" (RDRAND_RETRY_LOOPS));		\
+	return ok;						\
+}
+
+#ifdef CONFIG_X86_64
+
+GET_RANDOM(arch_get_random_long, unsigned long, RDRAND_LONG, ASM_NOP5);
+GET_RANDOM(arch_get_random_int, unsigned int, RDRAND_INT, ASM_NOP4);
+
+#else
+
+GET_RANDOM(arch_get_random_long, unsigned long, RDRAND_LONG, ASM_NOP3);
+GET_RANDOM(arch_get_random_int, unsigned int, RDRAND_INT, ASM_NOP3);
+
+#endif /* CONFIG_X86_64 */
+
+#endif  /* CONFIG_ARCH_RANDOM */
+
+#endif /* ASM_X86_ARCHRANDOM_H */

[ 33/37] x86, random: Verify RDRAND functionality and allow it to be disabled

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@zytor.com>

commit 49d859d78c5aeb998b6936fcb5f288f78d713489 upstream.

If the CPU declares that RDRAND is available, go through a guranteed
reseed sequence, and make sure that it is actually working (producing
data.)   If it does not, disable the CPU feature flag.

Allow RDRAND to be disabled on the command line (as opposed to at
compile time) for a user who has special requirements with regards to
random numbers.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/kernel-parameters.txt |    5 ++
 arch/x86/include/asm/archrandom.h   |    2 
 arch/x86/kernel/cpu/Makefile        |    1 
 arch/x86/kernel/cpu/common.c        |    2 
 arch/x86/kernel/cpu/rdrand.c        |   73 ++++++++++++++++++++++++++++++++++++
 5 files changed, 83 insertions(+)

--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1764,6 +1764,11 @@ bytes respectively. Such letter suffixes
 
 	noresidual	[PPC] Don't use residual data on PReP machines.
 
+	nordrand	[X86] Disable the direct use of the RDRAND
+			instruction even if it is supported by the
+			processor.  RDRAND is still available to user
+			space applications.
+
 	noresume	[SWSUSP] Disables resume and restores original swap
 			space.
 
--- a/arch/x86/include/asm/archrandom.h
+++ b/arch/x86/include/asm/archrandom.h
@@ -70,4 +70,6 @@ GET_RANDOM(arch_get_random_int, unsigned
 
 #endif  /* CONFIG_ARCH_RANDOM */
 
+extern void x86_init_rdrand(struct cpuinfo_x86 *c);
+
 #endif /* ASM_X86_ARCHRANDOM_H */
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -15,6 +15,7 @@ CFLAGS_common.o		:= $(nostackp)
 obj-y			:= intel_cacheinfo.o scattered.o topology.o
 obj-y			+= proc.o capflags.o powerflags.o common.o
 obj-y			+= vmware.o hypervisor.o sched.o mshyperv.o
+obj-y			+= rdrand.o
 
 obj-$(CONFIG_X86_32)	+= bugs.o
 obj-$(CONFIG_X86_64)	+= bugs_64.o
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -15,6 +15,7 @@
 #include <asm/stackprotector.h>
 #include <asm/perf_event.h>
 #include <asm/mmu_context.h>
+#include <asm/archrandom.h>
 #include <asm/hypervisor.h>
 #include <asm/processor.h>
 #include <asm/sections.h>
@@ -852,6 +853,7 @@ static void __cpuinit identify_cpu(struc
 #endif
 
 	init_hypervisor(c);
+	x86_init_rdrand(c);
 
 	/*
 	 * Clear/Set all flags overriden by options, need do it
--- /dev/null
+++ b/arch/x86/kernel/cpu/rdrand.c
@@ -0,0 +1,73 @@
+/*
+ * This file is part of the Linux kernel.
+ *
+ * Copyright (c) 2011, Intel Corporation
+ * Authors: Fenghua Yu <fenghua.yu@intel.com>,
+ *          H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <asm/processor.h>
+#include <asm/archrandom.h>
+#include <asm/sections.h>
+
+static int __init x86_rdrand_setup(char *s)
+{
+	setup_clear_cpu_cap(X86_FEATURE_RDRAND);
+	return 1;
+}
+__setup("nordrand", x86_rdrand_setup);
+
+/* We can't use arch_get_random_long() here since alternatives haven't run */
+static inline int rdrand_long(unsigned long *v)
+{
+	int ok;
+	asm volatile("1: " RDRAND_LONG "\n\t"
+		     "jc 2f\n\t"
+		     "decl %0\n\t"
+		     "jnz 1b\n\t"
+		     "2:"
+		     : "=r" (ok), "=a" (*v)
+		     : "0" (RDRAND_RETRY_LOOPS));
+	return ok;
+}
+
+/*
+ * Force a reseed cycle; we are architecturally guaranteed a reseed
+ * after no more than 512 128-bit chunks of random data.  This also
+ * acts as a test of the CPU capability.
+ */
+#define RESEED_LOOP ((512*128)/sizeof(unsigned long))
+
+void __cpuinit x86_init_rdrand(struct cpuinfo_x86 *c)
+{
+#ifdef CONFIG_ARCH_RANDOM
+	unsigned long tmp;
+	int i, count, ok;
+
+	if (!cpu_has(c, X86_FEATURE_RDRAND))
+		return;		/* Nothing to do */
+
+	for (count = i = 0; i < RESEED_LOOP; i++) {
+		ok = rdrand_long(&tmp);
+		if (ok)
+			count++;
+	}
+
+	if (count != RESEED_LOOP)
+		clear_cpu_cap(c, X86_FEATURE_RDRAND);
+#endif
+}

[ 34/37] tpm: Propagate error from tpm_transmit to fix a timeout hang

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Huewe <peter.huewe@infineon.com>

commit abce9ac292e13da367bbd22c1f7669f988d931ac upstream.

tpm_write calls tpm_transmit without checking the return value and
assigns the return value unconditionally to chip->pending_data, even if
it's an error value.
This causes three bugs.

So if we write to /dev/tpm0 with a tpm_param_size bigger than
TPM_BUFSIZE=0x1000 (e.g. 0x100a)
and a bufsize also bigger than TPM_BUFSIZE (e.g. 0x100a)
tpm_transmit returns -E2BIG which is assigned to chip->pending_data as
-7, but tpm_write returns that TPM_BUFSIZE bytes have been successfully
been written to the TPM, altough this is not true (bug #1).

As we did write more than than TPM_BUFSIZE bytes but tpm_write reports
that only TPM_BUFSIZE bytes have been written the vfs tries to write
the remaining bytes (in this case 10 bytes) to the tpm device driver via
tpm_write which then blocks at

 /* cannot perform a write until the read has cleared
 either via tpm_read or a user_read_timer timeout */
 while (atomic_read(&chip->data_pending) != 0)
	 msleep(TPM_TIMEOUT);

for 60 seconds, since data_pending is -7 and nobody is able to
read it (since tpm_read luckily checks if data_pending is greater than
0) (#bug 2).

After that the remaining bytes are written to the TPM which are
interpreted by the tpm as a normal command. (bug #3)
So if the last bytes of the command stream happen to be a e.g.
tpm_force_clear this gets accidentally sent to the TPM.

This patch fixes all three bugs, by propagating the error code of
tpm_write and returning -E2BIG if the input buffer is too big,
since the response from the tpm for a truncated value is bogus anyway.
Moreover it returns -EBUSY to userspace if there is a response ready to be
read.

Signed-off-by: Peter Huewe <peter.huewe@infineon.com>
Signed-off-by: Kent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/char/tpm/tpm.c |   21 ++++++++++++++-------
 1 file changed, 14 insertions(+), 7 deletions(-)

--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -1019,17 +1019,20 @@ ssize_t tpm_write(struct file *file, con
 		  size_t size, loff_t *off)
 {
 	struct tpm_chip *chip = file->private_data;
-	size_t in_size = size, out_size;
+	size_t in_size = size;
+	ssize_t out_size;
 
 	/* cannot perform a write until the read has cleared
-	   either via tpm_read or a user_read_timer timeout */
-	while (atomic_read(&chip->data_pending) != 0)
-		msleep(TPM_TIMEOUT);
-
-	mutex_lock(&chip->buffer_mutex);
+	   either via tpm_read or a user_read_timer timeout.
+	   This also prevents splitted buffered writes from blocking here.
+	*/
+	if (atomic_read(&chip->data_pending) != 0)
+		return -EBUSY;
 
 	if (in_size > TPM_BUFSIZE)
-		in_size = TPM_BUFSIZE;
+		return -E2BIG;
+
+	mutex_lock(&chip->buffer_mutex);
 
 	if (copy_from_user
 	    (chip->data_buffer, (void __user *) buf, in_size)) {
@@ -1039,6 +1042,10 @@ ssize_t tpm_write(struct file *file, con
 
 	/* atomic tpm command send and result receive */
 	out_size = tpm_transmit(chip, chip->data_buffer, TPM_BUFSIZE);
+	if (out_size < 0) {
+		mutex_unlock(&chip->buffer_mutex);
+		return out_size;
+	}
 
 	atomic_set(&chip->data_pending, out_size);
 	mutex_unlock(&chip->buffer_mutex);

[ 35/37] udf: fix retun value on error path in udf_load_logicalvol

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nikola Pajkovsky <npajkovs@redhat.com>

commit 68766a2edcd5cd744262a70a2f67a320ac944760 upstream.

In case we detect a problem and bail out, we fail to set "ret" to a
nonzero value, and udf_load_logicalvol will mistakenly report success.

Signed-off-by: Nikola Pajkovsky <npajkovs@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/udf/super.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1316,6 +1316,7 @@ static int udf_load_logicalvol(struct su
 		udf_error(sb, __func__, "error loading logical volume descriptor: "
 			"Partition table too long (%u > %lu)\n", table_len,
 			sb->s_blocksize - sizeof(*lvd));
+		ret = 1;
 		goto out_bh;
 	}
 
@@ -1360,8 +1361,10 @@ static int udf_load_logicalvol(struct su
 						UDF_ID_SPARABLE,
 						strlen(UDF_ID_SPARABLE))) {
 				if (udf_load_sparable_map(sb, map,
-				    (struct sparablePartitionMap *)gpm) < 0)
+				    (struct sparablePartitionMap *)gpm) < 0) {
+					ret = 1;
 					goto out_bh;
+				}
 			} else if (!strncmp(upm2->partIdent.ident,
 						UDF_ID_METADATA,
 						strlen(UDF_ID_METADATA))) {

[ 36/37] ALSA: ac97 - Fix missing NULL check in snd_ac97_cvol_new()

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <tiwai@suse.de>

commit 733a48e5ae5bf28b046fad984d458c747cbb8c21 upstream.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=44721

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/ac97/ac97_codec.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/sound/pci/ac97/ac97_codec.c
+++ b/sound/pci/ac97/ac97_codec.c
@@ -1271,6 +1271,8 @@ static int snd_ac97_cvol_new(struct snd_
 		tmp.index = ac97->num;
 		kctl = snd_ctl_new1(&tmp, ac97);
 	}
+	if (!kctl)
+		return -ENOMEM;
 	if (reg >= AC97_PHONE && reg <= AC97_PCM)
 		set_tlv_db_scale(kctl, db_scale_5bit_12db_max);
 	else

[ 37/37] ALSA: emu10k1: add chip details for E-mu 1010 PCIe card

[Greg Kroah-Hartman]

3.0-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maxim Kachur <mcdebugger@duganet.ru>

commit 10f571d09106c3eb85951896522c9650596eff2e upstream.

Add chip details for E-mu 1010 PCIe card. It has the same
chip as found in E-mu 1010b but it uses different PCI id.

Signed-off-by: Maxim Kachur <mcdebugger@duganet.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/emu10k1/emu10k1_main.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1415,6 +1415,15 @@ static struct snd_emu_chip_details emu_c
 	 .ca0108_chip = 1,
 	 .spk71 = 1,
 	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 new revision */
+	/* Tested by Maxim Kachur <mcdebugger@duganet.ru> 17th Oct 2012. */
+	/* This is MAEM8986, 0202 is MAEM8980 */
+	{.vendor = 0x1102, .device = 0x0008, .subsystem = 0x40071102,
+	 .driver = "Audigy2", .name = "E-mu 1010 PCIe [MAEM8986]",
+	 .id = "EMU1010",
+	 .emu10k2_chip = 1,
+	 .ca0108_chip = 1,
+	 .spk71 = 1,
+	 .emu_model = EMU_MODEL_EMU1010B}, /* EMU 1010 PCIe */
 	/* Tested by James@superbug.co.uk 8th July 2005. */
 	/* This is MAEM8810, 0202 is MAEM8820 */
 	{.vendor = 0x1102, .device = 0x0004, .subsystem = 0x40011102,