* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
@ 2012-10-18 7:32 Paweł Sikora
2012-10-19 21:25 ` Linus Torvalds
0 siblings, 1 reply; 25+ messages in thread
From: Paweł Sikora @ 2012-10-18 7:32 UTC (permalink / raw)
To: linux-kernel; +Cc: torvalds, marcheu
[-- Attachment #1: Type: text/plain, Size: 250 bytes --]
Hi,
the new 3.7.0-rc1-00078-g8d2b6b3 kernel oopses during startup on my asus laptop
with nvidia optimius crap and the builtin core-i7 graphics doesn't start.
the 3.5/3.6 kernels work fine, so this looks like a fresh regression.
BR,
Paweł.
[-- Attachment #2: dmesg.log --]
[-- Type: text/x-log, Size: 76591 bytes --]
Oct 18 07:52:20 localhost kernel: [ 0.408507] Brought up 8 CPUs
Oct 18 07:52:20 localhost kernel: [ 0.408616] smpboot: Total of 8 processors activated (31940.98 BogoMIPS)
Oct 18 07:52:20 localhost kernel: [ 0.416717] devtmpfs: initialized
Oct 18 07:52:20 localhost kernel: [ 0.420360] PM: Registering ACPI NVS region [mem 0xaaf09000-0xaafe7fff] (913408 bytes)
Oct 18 07:52:20 localhost kernel: [ 0.421640] regulator-dummy: no parameters
Oct 18 07:52:20 localhost kernel: [ 0.422014] NET: Registered protocol family 16
Oct 18 07:52:20 localhost kernel: [ 0.422941] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
Oct 18 07:52:20 localhost kernel: [ 0.423030] ACPI: bus type pci registered
Oct 18 07:52:20 localhost kernel: [ 0.423385] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
Oct 18 07:52:20 localhost kernel: [ 0.423468] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
Oct 18 07:52:20 localhost kernel: [ 0.438825] PCI: Using configuration type 1 for base access
Oct 18 07:52:20 localhost kernel: [ 0.444903] bio: create slab <bio-0> at 0
Oct 18 07:52:20 localhost kernel: [ 0.445253] ACPI: Added _OSI(Module Device)
Oct 18 07:52:20 localhost kernel: [ 0.445312] ACPI: Added _OSI(Processor Device)
Oct 18 07:52:20 localhost kernel: [ 0.445371] ACPI: Added _OSI(3.0 _SCP Extensions)
Oct 18 07:52:20 localhost kernel: [ 0.445431] ACPI: Added _OSI(Processor Aggregator Device)
Oct 18 07:52:20 localhost kernel: [ 0.453076] ACPI: EC: EC description table is found, configuring boot EC
Oct 18 07:52:20 localhost kernel: [ 0.453144] ACPI: EC: Look up EC in DSDT
Oct 18 07:52:20 localhost kernel: [ 0.461298] ACPI: Executed 1 blocks of module-level executable AML code
Oct 18 07:52:20 localhost kernel: [ 0.469487] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
Oct 18 07:52:20 localhost kernel: [ 0.538242] ACPI: SSDT 00000000aadcc718 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
Oct 18 07:52:20 localhost kernel: [ 0.540314] ACPI: Dynamic OEM Table Load:
Oct 18 07:52:20 localhost kernel: [ 0.540447] ACPI: SSDT (null) 00694 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
Oct 18 07:52:20 localhost kernel: [ 0.554744] ACPI: SSDT 00000000aadcda98 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
Oct 18 07:52:20 localhost kernel: [ 0.556875] ACPI: Dynamic OEM Table Load:
Oct 18 07:52:20 localhost kernel: [ 0.557008] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20091112)
Oct 18 07:52:20 localhost kernel: [ 0.571191] ACPI: SSDT 00000000aadcbd98 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
Oct 18 07:52:20 localhost kernel: [ 0.573266] ACPI: Dynamic OEM Table Load:
Oct 18 07:52:20 localhost kernel: [ 0.573399] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20091112)
Oct 18 07:52:20 localhost kernel: [ 0.575625] ACPI: Interpreter enabled
Oct 18 07:52:20 localhost kernel: [ 0.575687] ACPI: (supports S0 S1 S3 S4 S5)
Oct 18 07:52:20 localhost kernel: [ 0.575981] ACPI: Using IOAPIC for interrupt routing
Oct 18 07:52:20 localhost kernel: [ 0.698001] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
Oct 18 07:52:20 localhost kernel: [ 0.698678] ACPI: No dock devices found.
Oct 18 07:52:20 localhost kernel: [ 0.698738] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
Oct 18 07:52:20 localhost kernel: [ 0.699235] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
Oct 18 07:52:20 localhost kernel: [ 0.700243] PCI host bridge to bus 0000:00
Oct 18 07:52:20 localhost kernel: [ 0.700305] pci_bus 0000:00: root bus resource [bus 00-3e]
Oct 18 07:52:20 localhost kernel: [ 0.700366] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
Oct 18 07:52:20 localhost kernel: [ 0.700429] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
Oct 18 07:52:20 localhost kernel: [ 0.700491] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
Oct 18 07:52:20 localhost kernel: [ 0.700555] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
Oct 18 07:52:20 localhost kernel: [ 0.700618] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
Oct 18 07:52:20 localhost kernel: [ 0.700681] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
Oct 18 07:52:20 localhost kernel: [ 0.700744] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
Oct 18 07:52:20 localhost kernel: [ 0.700806] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
Oct 18 07:52:20 localhost kernel: [ 0.700870] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
Oct 18 07:52:20 localhost kernel: [ 0.700940] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
Oct 18 07:52:20 localhost kernel: [ 0.701004] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
Oct 18 07:52:20 localhost kernel: [ 0.701108] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
Oct 18 07:52:20 localhost kernel: [ 0.701202] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
Oct 18 07:52:20 localhost kernel: [ 0.701266] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.701328] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
Oct 18 07:52:20 localhost kernel: [ 0.701348] pci 0000:00:02.0: reg 10: [mem 0xdc400000-0xdc7fffff 64bit]
Oct 18 07:52:20 localhost kernel: [ 0.701359] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 0.701366] pci 0000:00:02.0: reg 20: [io 0xe000-0xe03f]
Oct 18 07:52:20 localhost kernel: [ 0.701477] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
Oct 18 07:52:20 localhost kernel: [ 0.701519] pci 0000:00:16.0: reg 10: [mem 0xdf00a000-0xdf00a00f 64bit]
Oct 18 07:52:20 localhost kernel: [ 0.701659] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.701722] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
Oct 18 07:52:20 localhost kernel: [ 0.701759] pci 0000:00:1a.0: reg 10: [mem 0xdf008000-0xdf0083ff]
Oct 18 07:52:20 localhost kernel: [ 0.701926] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.701974] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
Oct 18 07:52:20 localhost kernel: [ 0.702002] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit]
Oct 18 07:52:20 localhost kernel: [ 0.702139] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.702181] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
Oct 18 07:52:20 localhost kernel: [ 0.702331] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.702376] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
Oct 18 07:52:20 localhost kernel: [ 0.702525] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.702571] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
Oct 18 07:52:20 localhost kernel: [ 0.702718] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.702765] pci 0000:00:1c.5: [8086:1c1a] type 01 class 0x060400
Oct 18 07:52:20 localhost kernel: [ 0.702915] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.702971] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
Oct 18 07:52:20 localhost kernel: [ 0.703008] pci 0000:00:1d.0: reg 10: [mem 0xdf007000-0xdf0073ff]
Oct 18 07:52:20 localhost kernel: [ 0.703176] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.703220] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100
Oct 18 07:52:20 localhost kernel: [ 0.703434] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601
Oct 18 07:52:20 localhost kernel: [ 0.703471] pci 0000:00:1f.2: reg 10: [io 0xe0b0-0xe0b7]
Oct 18 07:52:20 localhost kernel: [ 0.703485] pci 0000:00:1f.2: reg 14: [io 0xe0a0-0xe0a3]
Oct 18 07:52:20 localhost kernel: [ 0.703500] pci 0000:00:1f.2: reg 18: [io 0xe090-0xe097]
Oct 18 07:52:20 localhost kernel: [ 0.703515] pci 0000:00:1f.2: reg 1c: [io 0xe080-0xe083]
Oct 18 07:52:20 localhost kernel: [ 0.703530] pci 0000:00:1f.2: reg 20: [io 0xe060-0xe07f]
Oct 18 07:52:20 localhost kernel: [ 0.703545] pci 0000:00:1f.2: reg 24: [mem 0xdf006000-0xdf0067ff]
Oct 18 07:52:20 localhost kernel: [ 0.703641] pci 0000:00:1f.2: PME# supported from D3hot
Oct 18 07:52:20 localhost kernel: [ 0.703674] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
Oct 18 07:52:20 localhost kernel: [ 0.703701] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit]
Oct 18 07:52:20 localhost kernel: [ 0.703742] pci 0000:00:1f.3: reg 20: [io 0xe040-0xe05f]
Oct 18 07:52:20 localhost kernel: [ 0.703848] pci 0000:01:00.0: [10de:0df4] type 00 class 0x030000
Oct 18 07:52:20 localhost kernel: [ 0.703861] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff]
Oct 18 07:52:20 localhost kernel: [ 0.703875] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 0.703889] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 0.703898] pci 0000:01:00.0: reg 24: [io 0xd000-0xd07f]
Oct 18 07:52:20 localhost kernel: [ 0.703907] pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref]
Oct 18 07:52:20 localhost kernel: [ 0.710950] pci 0000:00:01.0: PCI bridge to [bus 01]
Oct 18 07:52:20 localhost kernel: [ 0.711048] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Oct 18 07:52:20 localhost kernel: [ 0.711052] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
Oct 18 07:52:20 localhost kernel: [ 0.711058] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 0.711140] pci 0000:00:1c.0: PCI bridge to [bus 02]
Oct 18 07:52:20 localhost kernel: [ 0.711204] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
Oct 18 07:52:20 localhost kernel: [ 0.711210] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
Oct 18 07:52:20 localhost kernel: [ 0.711220] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 0.711334] pci 0000:03:00.0: [168c:002b] type 00 class 0x028000
Oct 18 07:52:20 localhost kernel: [ 0.711374] pci 0000:03:00.0: reg 10: [mem 0xddc00000-0xddc0ffff 64bit]
Oct 18 07:52:20 localhost kernel: [ 0.711574] pci 0000:03:00.0: supports D1
Oct 18 07:52:20 localhost kernel: [ 0.711576] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.717601] pci 0000:00:1c.1: PCI bridge to [bus 03]
Oct 18 07:52:20 localhost kernel: [ 0.717704] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
Oct 18 07:52:20 localhost kernel: [ 0.717711] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
Oct 18 07:52:20 localhost kernel: [ 0.717721] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 0.717836] pci 0000:04:00.0: [1b73:1000] type 00 class 0x0c0330
Oct 18 07:52:20 localhost kernel: [ 0.717866] pci 0000:04:00.0: reg 10: [mem 0xdd200000-0xdd20ffff]
Oct 18 07:52:20 localhost kernel: [ 0.718089] pci 0000:04:00.0: PME# supported from D0 D3hot
Oct 18 07:52:20 localhost kernel: [ 0.724265] pci 0000:00:1c.3: PCI bridge to [bus 04]
Oct 18 07:52:20 localhost kernel: [ 0.724367] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
Oct 18 07:52:20 localhost kernel: [ 0.724375] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
Oct 18 07:52:20 localhost kernel: [ 0.724386] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 0.724501] pci 0000:05:00.0: [1969:1083] type 00 class 0x020000
Oct 18 07:52:20 localhost kernel: [ 0.724542] pci 0000:05:00.0: reg 10: [mem 0xdc800000-0xdc83ffff 64bit]
Oct 18 07:52:20 localhost kernel: [ 0.724564] pci 0000:05:00.0: reg 18: [io 0x9000-0x907f]
Oct 18 07:52:20 localhost kernel: [ 0.724757] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Oct 18 07:52:20 localhost kernel: [ 0.730931] pci 0000:00:1c.5: PCI bridge to [bus 05]
Oct 18 07:52:20 localhost kernel: [ 0.731032] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
Oct 18 07:52:20 localhost kernel: [ 0.731039] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
Oct 18 07:52:20 localhost kernel: [ 0.731049] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 0.731091] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Oct 18 07:52:20 localhost kernel: [ 0.731473] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
Oct 18 07:52:20 localhost kernel: [ 0.731542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
Oct 18 07:52:20 localhost kernel: [ 0.731615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
Oct 18 07:52:20 localhost kernel: [ 0.731687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
Oct 18 07:52:20 localhost kernel: [ 0.731791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGR._PRT]
Oct 18 07:52:20 localhost kernel: [ 0.731884] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
Oct 18 07:52:20 localhost kernel: [ 0.731962] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
Oct 18 07:52:20 localhost kernel: [ 1.435359] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
Oct 18 07:52:20 localhost kernel: [ 1.435953] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 10 11 12 14 15)
Oct 18 07:52:20 localhost kernel: [ 1.436544] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 *3 4 5 6 10 11 12 14 15)
Oct 18 07:52:20 localhost kernel: [ 1.437130] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
Oct 18 07:52:20 localhost kernel: [ 1.437729] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
Oct 18 07:52:20 localhost kernel: [ 1.438414] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
Oct 18 07:52:20 localhost kernel: [ 1.439092] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 10 11 12 14 15)
Oct 18 07:52:20 localhost kernel: [ 1.439682] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 10 11 12 14 15)
Oct 18 07:52:20 localhost kernel: [ 1.440757] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
Oct 18 07:52:20 localhost kernel: [ 1.440846] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
Oct 18 07:52:20 localhost kernel: [ 1.440925] vgaarb: loaded
Oct 18 07:52:20 localhost kernel: [ 1.440980] vgaarb: bridge control possible 0000:01:00.0
Oct 18 07:52:20 localhost kernel: [ 1.441040] vgaarb: no bridge control possible 0000:00:02.0
Oct 18 07:52:20 localhost kernel: [ 1.441919] PCI: Using ACPI for IRQ routing
Oct 18 07:52:20 localhost kernel: [ 1.444906] PCI: pci_cache_line_size set to 64 bytes
Oct 18 07:52:20 localhost kernel: [ 1.445016] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
Oct 18 07:52:20 localhost kernel: [ 1.445019] e820: reserve RAM buffer [mem 0xaabd1000-0xabffffff]
Oct 18 07:52:20 localhost kernel: [ 1.445022] e820: reserve RAM buffer [mem 0xaace6000-0xabffffff]
Oct 18 07:52:20 localhost kernel: [ 1.445025] e820: reserve RAM buffer [mem 0xaacfa000-0xabffffff]
Oct 18 07:52:20 localhost kernel: [ 1.445028] e820: reserve RAM buffer [mem 0xaad8f000-0xabffffff]
Oct 18 07:52:20 localhost kernel: [ 1.445030] e820: reserve RAM buffer [mem 0xaadc8000-0xabffffff]
Oct 18 07:52:20 localhost kernel: [ 1.445032] e820: reserve RAM buffer [mem 0xaaf09000-0xabffffff]
Oct 18 07:52:20 localhost kernel: [ 1.445035] e820: reserve RAM buffer [mem 0xaaffd000-0xabffffff]
Oct 18 07:52:20 localhost kernel: [ 1.445037] e820: reserve RAM buffer [mem 0x34fe00000-0x34fffffff]
Oct 18 07:52:20 localhost kernel: [ 1.445636] NetLabel: Initializing
Oct 18 07:52:20 localhost kernel: [ 1.445693] NetLabel: domain hash size = 128
Oct 18 07:52:20 localhost kernel: [ 1.445750] NetLabel: protocols = UNLABELED CIPSOv4
Oct 18 07:52:20 localhost kernel: [ 1.445851] NetLabel: unlabeled traffic allowed by default
Oct 18 07:52:20 localhost kernel: [ 1.445922] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Oct 18 07:52:20 localhost kernel: [ 1.446321] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Oct 18 07:52:20 localhost kernel: [ 1.448406] Switching to clocksource hpet
Oct 18 07:52:20 localhost kernel: [ 1.454041] pnp: PnP ACPI init
Oct 18 07:52:20 localhost kernel: [ 1.454129] ACPI: bus type pnp registered
Oct 18 07:52:20 localhost kernel: [ 1.454542] pnp 00:00: [bus 00-3e]
Oct 18 07:52:20 localhost kernel: [ 1.454545] pnp 00:00: [io 0x0000-0x0cf7 window]
Oct 18 07:52:20 localhost kernel: [ 1.454547] pnp 00:00: [io 0x0cf8-0x0cff]
Oct 18 07:52:20 localhost kernel: [ 1.454550] pnp 00:00: [io 0x0d00-0xffff window]
Oct 18 07:52:20 localhost kernel: [ 1.454552] pnp 00:00: [mem 0x000a0000-0x000bffff window]
Oct 18 07:52:20 localhost kernel: [ 1.454554] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
Oct 18 07:52:20 localhost kernel: [ 1.454556] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
Oct 18 07:52:20 localhost kernel: [ 1.454559] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
Oct 18 07:52:20 localhost kernel: [ 1.454561] pnp 00:00: [mem 0x000cc000-0x000cffff window]
Oct 18 07:52:20 localhost kernel: [ 1.454563] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
Oct 18 07:52:20 localhost kernel: [ 1.454565] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
Oct 18 07:52:20 localhost kernel: [ 1.454567] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
Oct 18 07:52:20 localhost kernel: [ 1.454569] pnp 00:00: [mem 0x000dc000-0x000dffff window]
Oct 18 07:52:20 localhost kernel: [ 1.454571] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
Oct 18 07:52:20 localhost kernel: [ 1.454573] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
Oct 18 07:52:20 localhost kernel: [ 1.454576] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
Oct 18 07:52:20 localhost kernel: [ 1.454578] pnp 00:00: [mem 0x000ec000-0x000effff window]
Oct 18 07:52:20 localhost kernel: [ 1.454580] pnp 00:00: [mem 0x000f0000-0x000fffff window]
Oct 18 07:52:20 localhost kernel: [ 1.454582] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
Oct 18 07:52:20 localhost kernel: [ 1.454584] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
Oct 18 07:52:20 localhost kernel: [ 1.454731] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
Oct 18 07:52:20 localhost kernel: [ 1.454755] pnp 00:01: [io 0x0000-0x001f]
Oct 18 07:52:20 localhost kernel: [ 1.454757] pnp 00:01: [io 0x0081-0x0091]
Oct 18 07:52:20 localhost kernel: [ 1.454761] pnp 00:01: [io 0x0093-0x009f]
Oct 18 07:52:20 localhost kernel: [ 1.454764] pnp 00:01: [io 0x00c0-0x00df]
Oct 18 07:52:20 localhost kernel: [ 1.454766] pnp 00:01: [dma 4]
Oct 18 07:52:20 localhost kernel: [ 1.454859] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
Oct 18 07:52:20 localhost kernel: [ 1.454872] pnp 00:02: [mem 0xff000000-0xffffffff]
Oct 18 07:52:20 localhost kernel: [ 1.454960] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
Oct 18 07:52:20 localhost kernel: [ 1.455067] pnp 00:03: [mem 0xfed00000-0xfed003ff]
Oct 18 07:52:20 localhost kernel: [ 1.455159] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
Oct 18 07:52:20 localhost kernel: [ 1.455192] pnp 00:04: [io 0x00f0]
Oct 18 07:52:20 localhost kernel: [ 1.455205] pnp 00:04: [irq 13]
Oct 18 07:52:20 localhost kernel: [ 1.455303] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
Oct 18 07:52:20 localhost kernel: [ 1.455319] pnp 00:05: [io 0x002e-0x002f]
Oct 18 07:52:20 localhost kernel: [ 1.455321] pnp 00:05: [io 0x004e-0x004f]
Oct 18 07:52:20 localhost kernel: [ 1.455323] pnp 00:05: [io 0x0061]
Oct 18 07:52:20 localhost kernel: [ 1.455325] pnp 00:05: [io 0x0063]
Oct 18 07:52:20 localhost kernel: [ 1.455327] pnp 00:05: [io 0x0065]
Oct 18 07:52:20 localhost kernel: [ 1.455329] pnp 00:05: [io 0x0067]
Oct 18 07:52:20 localhost kernel: [ 1.455330] pnp 00:05: [io 0x0070]
Oct 18 07:52:20 localhost kernel: [ 1.455332] pnp 00:05: [io 0x0080]
Oct 18 07:52:20 localhost kernel: [ 1.455334] pnp 00:05: [io 0x0092]
Oct 18 07:52:20 localhost kernel: [ 1.455336] pnp 00:05: [io 0x00b2-0x00b3]
Oct 18 07:52:20 localhost kernel: [ 1.455338] pnp 00:05: [io 0x0680-0x069f]
Oct 18 07:52:20 localhost kernel: [ 1.455340] pnp 00:05: [io 0x1000-0x100f]
Oct 18 07:52:20 localhost kernel: [ 1.455342] pnp 00:05: [io 0xffff]
Oct 18 07:52:20 localhost kernel: [ 1.455344] pnp 00:05: [io 0xffff]
Oct 18 07:52:20 localhost kernel: [ 1.455346] pnp 00:05: [io 0x0400-0x0453]
Oct 18 07:52:20 localhost kernel: [ 1.455348] pnp 00:05: [io 0x0458-0x047f]
Oct 18 07:52:20 localhost kernel: [ 1.455350] pnp 00:05: [io 0x0500-0x057f]
Oct 18 07:52:20 localhost kernel: [ 1.455352] pnp 00:05: [io 0x164e-0x164f]
Oct 18 07:52:20 localhost kernel: [ 1.455474] system 00:05: [io 0x0680-0x069f] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.455537] system 00:05: [io 0x1000-0x100f] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.455600] system 00:05: [io 0xffff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.455661] system 00:05: [io 0xffff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.455721] system 00:05: [io 0x0400-0x0453] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.455783] system 00:05: [io 0x0458-0x047f] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.455845] system 00:05: [io 0x0500-0x057f] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.455907] system 00:05: [io 0x164e-0x164f] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.455973] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 07:52:20 localhost kernel: [ 1.455987] pnp 00:06: [io 0x0070-0x0077]
Oct 18 07:52:20 localhost kernel: [ 1.455996] pnp 00:06: [irq 8]
Oct 18 07:52:20 localhost kernel: [ 1.456086] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
Oct 18 07:52:20 localhost kernel: [ 1.456123] pnp 00:07: [io 0x0454-0x0457]
Oct 18 07:52:20 localhost kernel: [ 1.456228] system 00:07: [io 0x0454-0x0457] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.456294] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
Oct 18 07:52:20 localhost kernel: [ 1.456364] pnp 00:08: [irq 12]
Oct 18 07:52:20 localhost kernel: [ 1.456460] pnp 00:08: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
Oct 18 07:52:20 localhost kernel: [ 1.456492] pnp 00:09: [io 0x0060]
Oct 18 07:52:20 localhost kernel: [ 1.456494] pnp 00:09: [io 0x0064]
Oct 18 07:52:20 localhost kernel: [ 1.456502] pnp 00:09: [irq 1]
Oct 18 07:52:20 localhost kernel: [ 1.456593] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
Oct 18 07:52:20 localhost kernel: [ 1.505513] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
Oct 18 07:52:20 localhost kernel: [ 1.505516] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
Oct 18 07:52:20 localhost kernel: [ 1.505518] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
Oct 18 07:52:20 localhost kernel: [ 1.505520] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
Oct 18 07:52:20 localhost kernel: [ 1.505522] pnp 00:0a: [mem 0xe0000000-0xe3ffffff]
Oct 18 07:52:20 localhost kernel: [ 1.505524] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
Oct 18 07:52:20 localhost kernel: [ 1.505526] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
Oct 18 07:52:20 localhost kernel: [ 1.505529] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
Oct 18 07:52:20 localhost kernel: [ 1.505533] pnp 00:0a: [mem 0xff000000-0xffffffff]
Oct 18 07:52:20 localhost kernel: [ 1.505535] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
Oct 18 07:52:20 localhost kernel: [ 1.505537] pnp 00:0a: [mem 0xafa00000-0xafa00fff]
Oct 18 07:52:20 localhost kernel: [ 1.505684] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.505764] system 00:0a: [mem 0xfed10000-0xfed17fff] could not be reserved
Oct 18 07:52:20 localhost kernel: [ 1.505828] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.505892] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.505955] system 00:0a: [mem 0xe0000000-0xe3ffffff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.506019] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.506082] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.506145] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.506209] system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved
Oct 18 07:52:20 localhost kernel: [ 1.506273] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
Oct 18 07:52:20 localhost kernel: [ 1.506337] system 00:0a: [mem 0xafa00000-0xafa00fff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.506403] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 07:52:20 localhost kernel: [ 1.506449] pnp 00:0b: [mem 0xafa00000-0xafa00fff]
Oct 18 07:52:20 localhost kernel: [ 1.506586] system 00:0b: [mem 0xafa00000-0xafa00fff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.506653] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
Oct 18 07:52:20 localhost kernel: [ 1.506852] pnp 00:0c: [mem 0x20000000-0x201fffff]
Oct 18 07:52:20 localhost kernel: [ 1.506855] pnp 00:0c: [mem 0x40000000-0x401fffff]
Oct 18 07:52:20 localhost kernel: [ 1.506987] system 00:0c: [mem 0x20000000-0x201fffff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.507052] system 00:0c: [mem 0x40000000-0x401fffff] has been reserved
Oct 18 07:52:20 localhost kernel: [ 1.507618] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
Oct 18 07:52:20 localhost kernel: [ 1.507636] pnp: PnP ACPI: found 13 devices
Oct 18 07:52:20 localhost kernel: [ 1.507695] ACPI: ACPI bus type pnp unregistered
Oct 18 07:52:20 localhost kernel: [ 1.521061] pci 0000:00:01.0: PCI bridge to [bus 01]
Oct 18 07:52:20 localhost kernel: [ 1.521125] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
Oct 18 07:52:20 localhost kernel: [ 1.521190] pci 0000:00:01.0: bridge window [mem 0xdb000000-0xdc0fffff]
Oct 18 07:52:20 localhost kernel: [ 1.521256] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.521336] pci 0000:00:1c.0: PCI bridge to [bus 02]
Oct 18 07:52:20 localhost kernel: [ 1.521399] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
Oct 18 07:52:20 localhost kernel: [ 1.521467] pci 0000:00:1c.0: bridge window [mem 0xde600000-0xdeffffff]
Oct 18 07:52:20 localhost kernel: [ 1.521534] pci 0000:00:1c.0: bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.521619] pci 0000:00:1c.1: PCI bridge to [bus 03]
Oct 18 07:52:20 localhost kernel: [ 1.521681] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
Oct 18 07:52:20 localhost kernel: [ 1.521748] pci 0000:00:1c.1: bridge window [mem 0xddc00000-0xde5fffff]
Oct 18 07:52:20 localhost kernel: [ 1.521828] pci 0000:00:1c.1: bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.521914] pci 0000:00:1c.3: PCI bridge to [bus 04]
Oct 18 07:52:20 localhost kernel: [ 1.521975] pci 0000:00:1c.3: bridge window [io 0xa000-0xafff]
Oct 18 07:52:20 localhost kernel: [ 1.522043] pci 0000:00:1c.3: bridge window [mem 0xdd200000-0xddbfffff]
Oct 18 07:52:20 localhost kernel: [ 1.522110] pci 0000:00:1c.3: bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.522195] pci 0000:00:1c.5: PCI bridge to [bus 05]
Oct 18 07:52:20 localhost kernel: [ 1.522257] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
Oct 18 07:52:20 localhost kernel: [ 1.522325] pci 0000:00:1c.5: bridge window [mem 0xdc800000-0xdd1fffff]
Oct 18 07:52:20 localhost kernel: [ 1.522391] pci 0000:00:1c.5: bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.522532] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
Oct 18 07:52:20 localhost kernel: [ 1.522534] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
Oct 18 07:52:20 localhost kernel: [ 1.522536] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
Oct 18 07:52:20 localhost kernel: [ 1.522539] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
Oct 18 07:52:20 localhost kernel: [ 1.522541] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
Oct 18 07:52:20 localhost kernel: [ 1.522543] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
Oct 18 07:52:20 localhost kernel: [ 1.522545] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
Oct 18 07:52:20 localhost kernel: [ 1.522547] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
Oct 18 07:52:20 localhost kernel: [ 1.522549] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
Oct 18 07:52:20 localhost kernel: [ 1.522551] pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
Oct 18 07:52:20 localhost kernel: [ 1.522553] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
Oct 18 07:52:20 localhost kernel: [ 1.522556] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
Oct 18 07:52:20 localhost kernel: [ 1.522558] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
Oct 18 07:52:20 localhost kernel: [ 1.522560] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.522562] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
Oct 18 07:52:20 localhost kernel: [ 1.522564] pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
Oct 18 07:52:20 localhost kernel: [ 1.522567] pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.522569] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
Oct 18 07:52:20 localhost kernel: [ 1.522571] pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
Oct 18 07:52:20 localhost kernel: [ 1.522573] pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.522575] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
Oct 18 07:52:20 localhost kernel: [ 1.522578] pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
Oct 18 07:52:20 localhost kernel: [ 1.522580] pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.522582] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
Oct 18 07:52:20 localhost kernel: [ 1.522584] pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
Oct 18 07:52:20 localhost kernel: [ 1.522586] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
Oct 18 07:52:20 localhost kernel: [ 1.522655] NET: Registered protocol family 2
Oct 18 07:52:20 localhost kernel: [ 1.523812] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
Oct 18 07:52:20 localhost kernel: [ 1.525614] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes)
Oct 18 07:52:20 localhost kernel: [ 1.530392] TCP: Hash tables configured (established 524288 bind 65536)
Oct 18 07:52:20 localhost kernel: [ 1.530508] TCP: reno registered
Oct 18 07:52:20 localhost kernel: [ 1.530686] UDP hash table entries: 8192 (order: 8, 1310720 bytes)
Oct 18 07:52:20 localhost kernel: [ 1.532094] UDP-Lite hash table entries: 8192 (order: 8, 1310720 bytes)
Oct 18 07:52:20 localhost kernel: [ 1.533552] NET: Registered protocol family 1
Oct 18 07:52:20 localhost kernel: [ 1.533631] pci 0000:00:02.0: Boot video device
Oct 18 07:52:20 localhost kernel: [ 1.781958] PCI: CLS 64 bytes, default 64
Oct 18 07:52:20 localhost kernel: [ 1.782127] Trying to unpack rootfs image as initramfs...
Oct 18 07:52:20 localhost kernel: [ 1.901238] Freeing initrd memory: 5912k freed
Oct 18 07:52:20 localhost kernel: [ 1.902272] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Oct 18 07:52:20 localhost kernel: [ 1.902340] software IO TLB [mem 0xa6bd1000-0xaabd0fff] (64MB) mapped at [ffff8800a6bd1000-ffff8800aabd0fff]
Oct 18 07:52:20 localhost kernel: [ 1.903880] audit: initializing netlink socket (disabled)
Oct 18 07:52:20 localhost kernel: [ 1.903998] type=2000 audit(1350539501.656:1): initialized
Oct 18 07:52:20 localhost kernel: [ 1.938514] HugeTLB registered 2 MB page size, pre-allocated 0 pages
Oct 18 07:52:20 localhost kernel: [ 1.947111] VFS: Disk quotas dquot_6.5.2
Oct 18 07:52:20 localhost kernel: [ 1.947318] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Oct 18 07:52:20 localhost kernel: [ 1.947799] ROMFS MTD (C) 2007 Red Hat, Inc.
Oct 18 07:52:20 localhost kernel: [ 1.947966] msgmni has been set to 23840
Oct 18 07:52:20 localhost kernel: [ 1.948925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
Oct 18 07:52:20 localhost kernel: [ 1.949101] io scheduler noop registered
Oct 18 07:52:20 localhost kernel: [ 1.949159] io scheduler deadline registered
Oct 18 07:52:20 localhost kernel: [ 1.949427] io scheduler cfq registered (default)
Oct 18 07:52:20 localhost kernel: [ 1.952293] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
Oct 18 07:52:20 localhost kernel: [ 1.953308] intel_idle: MWAIT substates: 0x21120
Oct 18 07:52:20 localhost kernel: [ 1.953311] intel_idle: v0.4 model 0x2A
Oct 18 07:52:20 localhost kernel: [ 1.953312] intel_idle: lapic_timer_reliable_states 0xffffffff
Oct 18 07:52:20 localhost kernel: [ 1.953500] GHES: HEST is not enabled!
Oct 18 07:52:20 localhost kernel: [ 2.007889] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Oct 18 07:52:20 localhost kernel: [ 2.009549] Linux agpgart interface v0.103
Oct 18 07:52:20 localhost kernel: [ 2.014630] brd: module loaded
Oct 18 07:52:20 localhost kernel: [ 2.014926] libphy: Fixed MDIO Bus: probed
Oct 18 07:52:20 localhost kernel: [ 2.015241] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct 18 07:52:20 localhost kernel: [ 2.016943] i8042: Detected active multiplexing controller, rev 1.1
Oct 18 07:52:20 localhost kernel: [ 2.017809] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 18 07:52:20 localhost kernel: [ 2.017934] serio: i8042 AUX0 port at 0x60,0x64 irq 12
Oct 18 07:52:20 localhost kernel: [ 2.018012] serio: i8042 AUX1 port at 0x60,0x64 irq 12
Oct 18 07:52:20 localhost kernel: [ 2.018284] serio: i8042 AUX2 port at 0x60,0x64 irq 12
Oct 18 07:52:20 localhost kernel: [ 2.018469] serio: i8042 AUX3 port at 0x60,0x64 irq 12
Oct 18 07:52:20 localhost kernel: [ 2.019008] mousedev: PS/2 mouse device common for all mice
Oct 18 07:52:20 localhost kernel: [ 2.019192] rtc_cmos 00:06: RTC can wake from S4
Oct 18 07:52:20 localhost kernel: [ 2.019657] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
Oct 18 07:52:20 localhost kernel: [ 2.019758] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
Oct 18 07:52:20 localhost kernel: [ 2.020281] cpuidle: using governor ladder
Oct 18 07:52:20 localhost kernel: [ 2.021188] cpuidle: using governor menu
Oct 18 07:52:20 localhost kernel: [ 2.021318] ledtrig-cpu: registered to indicate activity on CPUs
Oct 18 07:52:20 localhost kernel: [ 2.022015] drop_monitor: Initializing network drop monitor service
Oct 18 07:52:20 localhost kernel: [ 2.022304] TCP: cubic registered
Oct 18 07:52:20 localhost kernel: [ 2.023528] NET: Registered protocol family 10
Oct 18 07:52:20 localhost kernel: [ 2.024116] mip6: Mobile IPv6
Oct 18 07:52:20 localhost kernel: [ 2.024176] NET: Registered protocol family 17
Oct 18 07:52:20 localhost kernel: [ 2.024579] Key type dns_resolver registered
Oct 18 07:52:20 localhost kernel: [ 2.027443] registered taskstats version 1
Oct 18 07:52:20 localhost kernel: [ 2.028752] rtc_cmos 00:06: setting system clock to 2012-10-18 05:51:42 UTC (1350539502)
Oct 18 07:52:20 localhost kernel: [ 2.031018] Freeing unused kernel memory: 656k freed
Oct 18 07:52:20 localhost kernel: [ 2.031171] Write protecting the kernel read-only data: 8192k
Oct 18 07:52:20 localhost kernel: [ 2.034893] Freeing unused kernel memory: 1256k freed
Oct 18 07:52:20 localhost kernel: [ 2.035803] Freeing unused kernel memory: 172k freed
Oct 18 07:52:20 localhost kernel: [ 2.043148] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
Oct 18 07:52:20 localhost kernel: [ 2.054442] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Oct 18 07:52:20 localhost kernel: [ 2.054713] ACPI: Lid Switch [LID]
Oct 18 07:52:20 localhost kernel: [ 2.054966] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
Oct 18 07:52:20 localhost kernel: [ 2.055073] ACPI: Sleep Button [SLPB]
Oct 18 07:52:20 localhost kernel: [ 2.055354] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
Oct 18 07:52:20 localhost kernel: [ 2.055456] ACPI: Power Button [PWRF]
Oct 18 07:52:20 localhost kernel: [ 2.060739] [drm] Initialized drm 1.1.0 20060810
Oct 18 07:52:20 localhost kernel: [ 2.066383] pci 0000:00:00.0: Intel Sandybridge Chipset
Oct 18 07:52:20 localhost kernel: [ 2.066636] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
Oct 18 07:52:20 localhost kernel: [ 2.068408] pci 0000:00:00.0: detected 65536K stolen memory
Oct 18 07:52:20 localhost kernel: [ 2.068679] i915 0000:00:02.0: setting latency timer to 64
Oct 18 07:52:20 localhost kernel: [ 2.149519] i915 0000:00:02.0: irq 41 for MSI/MSI-X
Oct 18 07:52:20 localhost kernel: [ 2.149536] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
Oct 18 07:52:20 localhost kernel: [ 2.149600] [drm] Driver supports precise vblank timestamp query.
Oct 18 07:52:20 localhost kernel: [ 2.150003] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
Oct 18 07:52:20 localhost kernel: [ 2.150084] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
Oct 18 07:52:20 localhost kernel: [ 2.321225] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
Oct 18 07:52:20 localhost kernel: [ 2.447956] fbcon: inteldrmfb (fb0) is primary device
Oct 18 07:52:20 localhost kernel: [ 2.904858] tsc: Refined TSC clocksource calibration: 1995.466 MHz
Oct 18 07:52:20 localhost kernel: [ 2.904901] Switching to clocksource tsc
Oct 18 07:52:20 localhost kernel: [ 3.191903] Console: switching to colour frame buffer device 200x56
Oct 18 07:52:20 localhost kernel: [ 3.195656] fb0: inteldrmfb frame buffer device
Oct 18 07:52:20 localhost kernel: [ 3.195679] drm: registered panic notifier
Oct 18 07:52:20 localhost kernel: [ 3.201907] ACPI Warning: _BQC returned an invalid level (20120913/video-472)
Oct 18 07:52:20 localhost kernel: [ 3.203141] acpi device:4f: registered as cooling_device0
Oct 18 07:52:20 localhost kernel: [ 3.203228] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
Oct 18 07:52:20 localhost kernel: [ 3.203604] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4b/LNXVIDEO:00/input/input4
Oct 18 07:52:20 localhost kernel: [ 3.206940] ACPI Warning: _BQC returned an invalid level (20120913/video-472)
Oct 18 07:52:20 localhost kernel: [ 3.207827] acpi device:51: registered as cooling_device1
Oct 18 07:52:20 localhost kernel: [ 3.208204] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
Oct 18 07:52:20 localhost kernel: [ 3.208489] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
Oct 18 07:52:20 localhost kernel: [ 3.208720] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Oct 18 07:52:20 localhost kernel: [ 3.211575] SCSI subsystem initialized
Oct 18 07:52:20 localhost kernel: [ 3.213425] ACPI: bus type scsi registered
Oct 18 07:52:20 localhost kernel: [ 3.213685] libata version 3.00 loaded.
Oct 18 07:52:20 localhost kernel: [ 3.215533] ahci 0000:00:1f.2: version 3.0
Oct 18 07:52:20 localhost kernel: [ 3.215621] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
Oct 18 07:52:20 localhost kernel: [ 3.228064] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
Oct 18 07:52:20 localhost kernel: [ 3.228120] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
Oct 18 07:52:20 localhost kernel: [ 3.228162] ahci 0000:00:1f.2: setting latency timer to 64
Oct 18 07:52:20 localhost kernel: [ 3.244419] scsi0 : ahci
Oct 18 07:52:20 localhost kernel: [ 3.244865] scsi1 : ahci
Oct 18 07:52:20 localhost kernel: [ 3.245091] scsi2 : ahci
Oct 18 07:52:20 localhost kernel: [ 3.245312] scsi3 : ahci
Oct 18 07:52:20 localhost kernel: [ 3.245537] scsi4 : ahci
Oct 18 07:52:20 localhost kernel: [ 3.245759] scsi5 : ahci
Oct 18 07:52:20 localhost kernel: [ 3.245950] ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 42
Oct 18 07:52:20 localhost kernel: [ 3.245987] ata2: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006180 irq 42
Oct 18 07:52:20 localhost kernel: [ 3.246023] ata3: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006200 irq 42
Oct 18 07:52:20 localhost kernel: [ 3.246057] ata4: DUMMY
Oct 18 07:52:20 localhost kernel: [ 3.246071] ata5: DUMMY
Oct 18 07:52:20 localhost kernel: [ 3.246084] ata6: DUMMY
Oct 18 07:52:20 localhost kernel: [ 3.564651] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Oct 18 07:52:20 localhost kernel: [ 3.569144] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 07:52:20 localhost kernel: [ 3.569157] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.570458] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.571798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Oct 18 07:52:20 localhost kernel: [ 3.573127] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Oct 18 07:52:20 localhost kernel: [ 3.574431] ata3.00: ATAPI: HL-DT-STDVDRAM GT34N, AS00, max UDMA/100
Oct 18 07:52:20 localhost kernel: [ 3.577100] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 07:52:20 localhost kernel: [ 3.577105] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.578392] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.579696] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 07:52:20 localhost kernel: [ 3.579701] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.580968] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.583302] ata1.00: ATA-8: WDC WD5000BEVT-80A0RT0, 01.01A01, max UDMA/133
Oct 18 07:52:20 localhost kernel: [ 3.584616] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Oct 18 07:52:20 localhost kernel: [ 3.586002] ata3.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 07:52:20 localhost kernel: [ 3.586007] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.587298] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.588643] ata1.00: failed to get Identify Device Data, Emask 0x1
Oct 18 07:52:20 localhost kernel: [ 3.588927] ata2.00: ATA-8: WDC WD5000BEVT-80A0RT0, 01.01A01, max UDMA/133
Oct 18 07:52:20 localhost kernel: [ 3.590236] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
Oct 18 07:52:20 localhost kernel: [ 3.591594] ata3.00: configured for UDMA/100
Oct 18 07:52:20 localhost kernel: [ 3.593538] ata2.00: failed to get Identify Device Data, Emask 0x1
Oct 18 07:52:20 localhost kernel: [ 3.593696] ata1.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 07:52:20 localhost kernel: [ 3.593700] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.595023] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.599128] ata2.00: ACPI cmd ef/90:06:00:00:00:00 (SET FEATURES) succeeded
Oct 18 07:52:20 localhost kernel: [ 3.599134] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.600449] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
Oct 18 07:52:20 localhost kernel: [ 3.601807] ata1.00: failed to get Identify Device Data, Emask 0x1
Oct 18 07:52:20 localhost kernel: [ 3.601814] ata1.00: configured for UDMA/133
Oct 18 07:52:20 localhost kernel: [ 3.604239] ata2.00: failed to get Identify Device Data, Emask 0x1
Oct 18 07:52:20 localhost kernel: [ 3.604252] ata2.00: configured for UDMA/133
Oct 18 07:52:20 localhost kernel: [ 3.608631] scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-8 01.0 PQ: 0 ANSI: 5
Oct 18 07:52:20 localhost kernel: [ 3.612482] scsi 1:0:0:0: Direct-Access ATA WDC WD5000BEVT-8 01.0 PQ: 0 ANSI: 5
Oct 18 07:52:20 localhost kernel: [ 3.612071] ACPI: Invalid Power Resource to register!
Oct 18 07:52:20 localhost kernel: [ 3.615333] ACPI: Invalid Power Resource to register!<5>[ 3.617361] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT34N AS00 PQ: 0 ANSI: 5
Oct 18 07:52:20 localhost kernel: [ 3.623329] md: raid10 personality registered for level 10
Oct 18 07:52:20 localhost kernel: [ 3.626732] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 18 07:52:20 localhost kernel: [ 3.626767] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 18 07:52:20 localhost kernel: [ 3.626890] sd 1:0:0:0: [sdb] Write Protect is off
Oct 18 07:52:20 localhost kernel: [ 3.626893] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Oct 18 07:52:20 localhost kernel: [ 3.626938] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 18 07:52:20 localhost kernel: [ 3.631899] sd 0:0:0:0: [sda] Write Protect is off
Oct 18 07:52:20 localhost kernel: [ 3.633156] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 18 07:52:20 localhost kernel: [ 3.633188] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 18 07:52:20 localhost kernel: [ 3.657899] sdb: sdb1 sdb2
Oct 18 07:52:20 localhost kernel: [ 3.660765] sd 1:0:0:0: [sdb] Attached SCSI disk
Oct 18 07:52:20 localhost kernel: [ 3.670822] sda: sda1 sda2
Oct 18 07:52:20 localhost kernel: [ 3.673155] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 18 07:52:20 localhost kernel: [ 3.676438] device-mapper: uevent: version 1.0.3
Oct 18 07:52:20 localhost kernel: [ 3.678187] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
Oct 18 07:52:20 localhost kernel: [ 3.948957] md: md1 stopped.
Oct 18 07:52:20 localhost kernel: [ 3.952235] md: bind<sdb2>
Oct 18 07:52:20 localhost kernel: [ 3.953777] md: bind<sda2>
Oct 18 07:52:20 localhost kernel: [ 3.955684] md/raid10:md1: active with 2 out of 2 devices
Oct 18 07:52:20 localhost kernel: [ 3.956948] md1: detected capacity change from 0 to 499596132352
Oct 18 07:52:20 localhost kernel: [ 3.985753] md1: unknown partition table
Oct 18 07:52:20 localhost kernel: [ 4.039180] bio: create slab <bio-1> at 1
Oct 18 07:52:20 localhost kernel: [ 4.265948] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
Oct 18 07:52:20 localhost kernel: [ 6.786776] thermal LNXTHERM:00: registered as thermal_zone0
Oct 18 07:52:20 localhost kernel: [ 6.786780] ACPI: Thermal Zone [TZ00] (40 C)
Oct 18 07:52:20 localhost kernel: [ 6.855492] ACPI: Requesting acpi_cpufreq
Oct 18 07:52:20 localhost kernel: [ 6.860382] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Oct 18 07:52:20 localhost kernel: [ 6.860399] ACPI: Battery Slot [BAT0] (battery present)
Oct 18 07:52:20 localhost kernel: [ 6.861819] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
Oct 18 07:52:20 localhost kernel: [ 6.862049] ACPI: AC Adapter [AC0] (on-line)
Oct 18 07:52:20 localhost kernel: [ 6.930343] wmi: Mapper loaded
Oct 18 07:52:20 localhost kernel: [ 6.931725] mei 0000:00:16.0: setting latency timer to 64
Oct 18 07:52:20 localhost kernel: [ 6.931889] mei 0000:00:16.0: irq 43 for MSI/MSI-X
Oct 18 07:52:20 localhost kernel: [ 6.944949] mei 0000:00:16.0: wd: failed to find the client
Oct 18 07:52:20 localhost kernel: [ 6.979204] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x14
Oct 18 07:52:20 localhost kernel: [ 7.132518] ACPI: bus type usb registered
Oct 18 07:52:20 localhost kernel: [ 7.132598] usbcore: registered new interface driver usbfs
Oct 18 07:52:20 localhost kernel: [ 7.132705] usbcore: registered new interface driver hub
Oct 18 07:52:20 localhost kernel: [ 7.132809] usbcore: registered new device driver usb
Oct 18 07:52:20 localhost kernel: [ 7.167872] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x14
Oct 18 07:52:20 localhost kernel: [ 7.168855] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x14
Oct 18 07:52:20 localhost kernel: [ 7.169461] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x14
Oct 18 07:52:20 localhost kernel: [ 7.170059] microcode: CPU4 sig=0x206a7, pf=0x10, revision=0x14
Oct 18 07:52:20 localhost kernel: [ 7.170783] microcode: CPU5 sig=0x206a7, pf=0x10, revision=0x14
Oct 18 07:52:20 localhost kernel: [ 7.171441] microcode: CPU6 sig=0x206a7, pf=0x10, revision=0x14
Oct 18 07:52:20 localhost kernel: [ 7.171964] microcode: CPU7 sig=0x206a7, pf=0x10, revision=0x14
Oct 18 07:52:20 localhost kernel: [ 7.172684] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Oct 18 07:52:20 localhost kernel: [ 7.221330] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Oct 18 07:52:20 localhost kernel: [ 7.221432] ehci_hcd 0000:00:1a.0: setting latency timer to 64
Oct 18 07:52:20 localhost kernel: [ 7.221437] ehci_hcd 0000:00:1a.0: EHCI Host Controller
Oct 18 07:52:20 localhost kernel: [ 7.221626] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Oct 18 07:52:20 localhost kernel: [ 7.225149] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
Oct 18 07:52:20 localhost kernel: [ 7.225610] ehci_hcd 0000:00:1a.0: debug port 2
Oct 18 07:52:20 localhost kernel: [ 7.225621] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
Oct 18 07:52:20 localhost kernel: [ 7.225652] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000
Oct 18 07:52:20 localhost kernel: [ 7.233381] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Oct 18 07:52:20 localhost kernel: [ 7.233588] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Oct 18 07:52:20 localhost kernel: [ 7.233591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 07:52:20 localhost kernel: [ 7.233593] usb usb1: Product: EHCI Host Controller
Oct 18 07:52:20 localhost kernel: [ 7.233595] usb usb1: Manufacturer: Linux 3.7.0-rc1-00078-g8d2b6b3 ehci_hcd
Oct 18 07:52:20 localhost kernel: [ 7.233597] usb usb1: SerialNumber: 0000:00:1a.0
Oct 18 07:52:20 localhost kernel: [ 7.234443] hub 1-0:1.0: USB hub found
Oct 18 07:52:20 localhost kernel: [ 7.234522] hub 1-0:1.0: 2 ports detected
Oct 18 07:52:20 localhost kernel: [ 7.235224] ehci_hcd 0000:00:1d.0: setting latency timer to 64
Oct 18 07:52:20 localhost kernel: [ 7.235229] ehci_hcd 0000:00:1d.0: EHCI Host Controller
Oct 18 07:52:20 localhost kernel: [ 7.235239] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Oct 18 07:52:20 localhost kernel: [ 7.239154] ehci_hcd 0000:00:1d.0: debug port 2
Oct 18 07:52:20 localhost kernel: [ 7.239165] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
Oct 18 07:52:20 localhost kernel: [ 7.239191] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000
Oct 18 07:52:20 localhost kernel: [ 7.246697] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Oct 18 07:52:20 localhost kernel: [ 7.246792] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Oct 18 07:52:20 localhost kernel: [ 7.246795] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 07:52:20 localhost kernel: [ 7.246797] usb usb2: Product: EHCI Host Controller
Oct 18 07:52:20 localhost kernel: [ 7.246799] usb usb2: Manufacturer: Linux 3.7.0-rc1-00078-g8d2b6b3 ehci_hcd
Oct 18 07:52:20 localhost kernel: [ 7.246801] usb usb2: SerialNumber: 0000:00:1d.0
Oct 18 07:52:20 localhost kernel: [ 7.247126] hub 2-0:1.0: USB hub found
Oct 18 07:52:20 localhost kernel: [ 7.247139] hub 2-0:1.0: 2 ports detected
Oct 18 07:52:20 localhost kernel: [ 7.394788] input: PC Speaker as /devices/platform/pcspkr/input/input6
Oct 18 07:52:20 localhost kernel: [ 3.620421] ACPI: Invalid Power Resource to register!
Oct 18 07:52:20 localhost kernel: [ 7.439313] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120913/utaddress-251)
Oct 18 07:52:20 localhost kernel: [ 7.439322] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 07:52:20 localhost kernel: [ 7.439327] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \SBGP 1 (20120913/utaddress-251)
Oct 18 07:52:20 localhost kernel: [ 7.439331] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 2 (20120913/utaddress-251)
Oct 18 07:52:20 localhost kernel: [ 7.439336] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 07:52:20 localhost kernel: [ 7.439337] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \SBGP 1 (20120913/utaddress-251)
Oct 18 07:52:20 localhost kernel: [ 7.439341] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 2 (20120913/utaddress-251)
Oct 18 07:52:20 localhost kernel: [ 7.439345] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 07:52:20 localhost kernel: [ 7.439347] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \SBGP 1 (20120913/utaddress-251)
Oct 18 07:52:20 localhost kernel: [ 7.439351] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20120913/utaddress-251)
Oct 18 07:52:20 localhost kernel: [ 7.439355] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 07:52:20 localhost kernel: [ 7.439356] lpc_ich: Resource conflict(s) found affecting gpio_ich
Oct 18 07:52:20 localhost kernel: [ 7.539975] usb 1-1: new high-speed USB device number 2 using ehci_hcd
Oct 18 07:52:20 localhost kernel: [ 7.592556] xhci_hcd 0000:04:00.0: xHCI Host Controller
Oct 18 07:52:20 localhost kernel: [ 7.592573] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
Oct 18 07:52:20 localhost kernel: [ 7.663594] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
Oct 18 07:52:20 localhost kernel: [ 7.663598] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 07:52:20 localhost kernel: [ 7.664278] hub 1-1:1.0: USB hub found
Oct 18 07:52:20 localhost kernel: [ 7.664451] hub 1-1:1.0: 6 ports detected
Oct 18 07:52:20 localhost kernel: [ 7.728424] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000
Oct 18 07:52:20 localhost kernel: [ 7.728486] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Oct 18 07:52:20 localhost kernel: [ 7.728489] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 07:52:20 localhost kernel: [ 7.728491] usb usb3: Product: xHCI Host Controller
Oct 18 07:52:20 localhost kernel: [ 7.728493] usb usb3: Manufacturer: Linux 3.7.0-rc1-00078-g8d2b6b3 xhci_hcd
Oct 18 07:52:20 localhost kernel: [ 7.728495] usb usb3: SerialNumber: 0000:04:00.0
Oct 18 07:52:20 localhost kernel: [ 7.728735] xHCI xhci_add_endpoint called for root hub
Oct 18 07:52:20 localhost kernel: [ 7.728738] xHCI xhci_check_bandwidth called for root hub
Oct 18 07:52:20 localhost kernel: [ 7.728799] hub 3-0:1.0: USB hub found
Oct 18 07:52:20 localhost kernel: [ 7.728863] hub 3-0:1.0: 1 port detected
Oct 18 07:52:20 localhost kernel: [ 7.729025] xhci_hcd 0000:04:00.0: xHCI Host Controller
Oct 18 07:52:20 localhost kernel: [ 7.729033] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
Oct 18 07:52:20 localhost kernel: [ 7.729098] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
Oct 18 07:52:20 localhost kernel: [ 7.729101] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Oct 18 07:52:20 localhost kernel: [ 7.729103] usb usb4: Product: xHCI Host Controller
Oct 18 07:52:20 localhost kernel: [ 7.729105] usb usb4: Manufacturer: Linux 3.7.0-rc1-00078-g8d2b6b3 xhci_hcd
Oct 18 07:52:20 localhost kernel: [ 7.729107] usb usb4: SerialNumber: 0000:04:00.0
Oct 18 07:52:20 localhost kernel: [ 7.729361] xHCI xhci_add_endpoint called for root hub
Oct 18 07:52:20 localhost kernel: [ 7.729364] xHCI xhci_check_bandwidth called for root hub
Oct 18 07:52:20 localhost kernel: [ 7.729424] hub 4-0:1.0: USB hub found
Oct 18 07:52:20 localhost kernel: [ 7.729440] hub 4-0:1.0: 1 port detected
Oct 18 07:52:20 localhost kernel: [ 7.734687] ACPI Warning: 0x000000000000e040-0x000000000000e05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120913/utaddress-251)
Oct 18 07:52:20 localhost kernel: [ 7.734695] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Oct 18 07:52:20 localhost kernel: [ 7.773219] usb 2-1: new high-speed USB device number 2 using ehci_hcd
Oct 18 07:52:20 localhost kernel: [ 7.883748] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Oct 18 07:52:20 localhost kernel: [ 7.883757] cdrom: Uniform CD-ROM driver Revision: 3.20
Oct 18 07:52:20 localhost kernel: [ 7.884259] sr 2:0:0:0: Attached scsi CD-ROM sr0
Oct 18 07:52:20 localhost kernel: [ 7.896884] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
Oct 18 07:52:20 localhost kernel: [ 7.896894] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 07:52:20 localhost kernel: [ 7.897364] hub 2-1:1.0: USB hub found
Oct 18 07:52:20 localhost kernel: [ 7.897482] hub 2-1:1.0: 6 ports detected
Oct 18 07:52:20 localhost kernel: [ 7.966613] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
Oct 18 07:52:20 localhost kernel: [ 8.050595] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3304
Oct 18 07:52:20 localhost kernel: [ 8.050605] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Oct 18 07:52:20 localhost kernel: [ 8.116581] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
Oct 18 07:52:20 localhost kernel: [ 8.155369] cfg80211: Calling CRDA to update world regulatory domain
Oct 18 07:52:20 localhost kernel: [ 8.175962] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 18 07:52:20 localhost kernel: [ 8.190365] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
Oct 18 07:52:20 localhost kernel: [ 8.221687] asus_wmi: ASUS WMI generic driver loaded
Oct 18 07:52:20 localhost kernel: [ 8.222584] asus_wmi: Initialization: 0x1asus_wmi: SFUN value: 0x1a0af7
Oct 18 07:52:20 localhost kernel: [ 8.223501] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input7
Oct 18 07:52:20 localhost kernel: [ 8.229097] asus_wmi: Backlight controlled by ACPI video driver
Oct 18 07:52:20 localhost kernel: [ 8.238356] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5122
Oct 18 07:52:20 localhost kernel: [ 8.238361] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
Oct 18 07:52:20 localhost kernel: [ 8.238364] usb 1-1.2: Product: USB2.0 UVC 2M WebCam
Oct 18 07:52:20 localhost kernel: [ 8.238367] usb 1-1.2: Manufacturer: USB2.0 UVC 2M WebCam
Oct 18 07:52:20 localhost kernel: [ 8.238369] usb 1-1.2: SerialNumber: USB2.0 UVC 2M WebCam
Oct 18 07:52:20 localhost kernel: [ 8.309872] usb 2-1.2: new low-speed USB device number 3 using ehci_hcd
Oct 18 07:52:20 localhost kernel: [ 8.323596] iTCO_vendor_support: vendor-support=0
Oct 18 07:52:20 localhost kernel: [ 8.352047] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
Oct 18 07:52:20 localhost kernel: [ 8.352186] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
Oct 18 07:52:20 localhost kernel: [ 8.352283] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
Oct 18 07:52:20 localhost kernel: [ 8.398720] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c051
Oct 18 07:52:20 localhost kernel: [ 8.398732] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Oct 18 07:52:20 localhost kernel: [ 8.398738] usb 2-1.2: Product: USB-PS/2 Optical Mouse
Oct 18 07:52:20 localhost kernel: [ 8.398743] usb 2-1.2: Manufacturer: Logitech
Oct 18 07:52:20 localhost kernel: [ 8.402605] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
Oct 18 07:52:20 localhost kernel: [ 8.402648] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
Oct 18 07:52:20 localhost kernel: [ 8.403205] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Oct 18 07:52:20 localhost kernel: [ 8.624068] psmouse serio4: elantech: assuming hardware version 2 (with firmware version 0x040201)
Oct 18 07:52:20 localhost kernel: [ 8.653079] psmouse serio4: elantech: Synaptics capabilities query result 0x78, 0x14, 0x0b.
Oct 18 07:52:20 localhost kernel: [ 8.758056] usbcore: registered new interface driver usbhid
Oct 18 07:52:20 localhost kernel: [ 8.758059] usbhid: USB HID core driver
Oct 18 07:52:20 localhost kernel: [ 8.761963] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input11
Oct 18 07:52:20 localhost kernel: [ 8.763302] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
Oct 18 07:52:20 localhost kernel: [ 8.764046] hid-generic 0003:046D:C051.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1.2/input0
Oct 18 07:52:20 localhost kernel: [ 8.783234] media: Linux media interface: v0.10
Oct 18 07:52:20 localhost kernel: [ 8.867742] MXM: GUID detected in BIOS
Oct 18 07:52:20 localhost kernel: [ 8.867985] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEGR.GFX0 handle
Oct 18 07:52:20 localhost kernel: [ 8.868098] nouveau 0000:01:00.0: enabling device (0004 -> 0007)
Oct 18 07:52:20 localhost kernel: [ 8.868782] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0c1a00a1
Oct 18 07:52:20 localhost kernel: [ 8.868785] nouveau [ DEVICE][0000:01:00.0] Chipset: GF108 (NVC1)
Oct 18 07:52:20 localhost kernel: [ 8.868787] nouveau [ DEVICE][0000:01:00.0] Family : NVC0
Oct 18 07:52:20 localhost kernel: [ 8.872044] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
Oct 18 07:52:20 localhost kernel: [ 8.881776] nouveau [ VBIOS][0000:01:00.0] ... signature not found
Oct 18 07:52:20 localhost kernel: [ 8.881778] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
Oct 18 07:52:20 localhost kernel: [ 8.881836] nouveau [ VBIOS][0000:01:00.0] ... signature not found
Oct 18 07:52:20 localhost kernel: [ 8.881838] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
Oct 18 07:52:20 localhost kernel: [ 8.881920] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
Oct 18 07:52:20 localhost kernel: [ 8.881926] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGR.GFX0._ROM] (Node ffff88033e47fe88), AE_AML_REGION_LIMIT (20120913/psparse-536)
Oct 18 07:52:20 localhost kernel: [ 8.886284] failed to evaluate ROM got AE_AML_REGION_LIMIT
Oct 18 07:52:20 localhost kernel: [ 8.886312] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
Oct 18 07:52:20 localhost kernel: [ 8.888373] IP: [<ffffffffa0630395>] nouveau_bios_score+0x15/0xd0 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.889399] PGD 33cb71067 PUD 33cb72067 PMD 0
Oct 18 07:52:20 localhost kernel: [ 8.890412] Oops: 0000 [#1] SMP
Oct 18 07:52:20 localhost kernel: [ 8.891412] Modules linked in: ath9k_hw nouveau(+) media hid_generic usbhid videobuf2_vmalloc hid videobuf2_memops ath coretemp iTCO_wdt snd_hda_codec_hdmi iTCO_vendor_support ttm kvm_intel snd_hda_codec_realtek asus_nb_wmi asus_wmi acpi_cpufreq kvm sparse_keymap snd_hda_intel pci_hotplug snd_hda_codec cfg80211 psmouse sr_mod crc32c_intel snd_hwdep cdrom snd_pcm snd_timer i2c_i801 xhci_hcd hwmon mperf ghash_clmulni_intel snd lpc_ich rfkill serio_raw pcspkr cryptd ehci_hcd atl1c usbcore mxm_wmi soundcore usb_common microcode mei wmi snd_page_alloc evdev ac battery processor thermal ext4 mbcache jbd2 crc16 dm_mod sd_mod crc_t10dif raid10 md_mod ahci libahci libata scsi_mod i915 drm_kms_helper drm intel_agp i2c_algo_bit intel_gtt button i2c_core video
Oct 18 07:52:20 localhost kernel: [ 8.896104] CPU 1
Oct 18 07:52:20 localhost kernel: [ 8.896115] Pid: 2760, comm: udevd Not tainted 3.7.0-rc1-00078-g8d2b6b3 #24 ASUSTeK Computer Inc. N73SV/N73SV
Oct 18 07:52:20 localhost kernel: [ 8.898586] RIP: 0010:[<ffffffffa0630395>] [<ffffffffa0630395>] nouveau_bios_score+0x15/0xd0 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.899934] RSP: 0018:ffff88033c065818 EFLAGS: 00010202
Oct 18 07:52:20 localhost kernel: [ 8.901189] RAX: 0000000000000010 RBX: ffff88033c861300 RCX: 0000000000000006
Oct 18 07:52:20 localhost kernel: [ 8.902446] RDX: 0000000000000006 RSI: 0000000000000001 RDI: ffff88033c861300
Oct 18 07:52:20 localhost kernel: [ 8.903652] RBP: ffff88033c065828 R08: 0000000000000000 R09: 0000000000000000
Oct 18 07:52:20 localhost kernel: [ 8.904814] R10: 0000000000000001 R11: 0000000000000000 R12: ffff88033c0658a8
Oct 18 07:52:20 localhost kernel: [ 8.905973] R13: ffff88033c065848 R14: 0000000000000000 R15: ffff8803367a8400
Oct 18 07:52:20 localhost kernel: [ 8.907128] FS: 00007f790de45800(0000) GS:ffff88034fa20000(0000) knlGS:0000000000000000
Oct 18 07:52:20 localhost kernel: [ 8.908285] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
Oct 18 07:52:20 localhost kernel: [ 8.909454] CR2: 0000000000000010 CR3: 000000033cb70000 CR4: 00000000000407e0
Oct 18 07:52:20 localhost kernel: [ 8.910620] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Oct 18 07:52:20 localhost kernel: [ 8.911773] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Oct 18 07:52:20 localhost kernel: [ 8.912936] Process udevd (pid: 2760, threadinfo ffff88033c064000, task ffff88033bd5cd80)
Oct 18 07:52:20 localhost kernel: [ 8.914123] Stack:
Oct 18 07:52:20 localhost kernel: [ 8.915266] ffff88033c065848 ffff88033c861300 ffff88033c065958 ffffffffa0630666
Oct 18 07:52:20 localhost kernel: [ 8.916451] ffff88033c065858 ffffffff8109431d 00004e494d415250 0000000000000000
Oct 18 07:52:20 localhost kernel: [ 8.917641] ffffffffa0630a00 0000000000000001 0000000000000000 0000000000000000
Oct 18 07:52:20 localhost kernel: [ 8.918820] Call Trace:
Oct 18 07:52:20 localhost kernel: [ 8.919984] [<ffffffffa0630666>] nouveau_bios_shadow+0x216/0x390 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.921165] [<ffffffff8109431d>] ? trace_hardirqs_on_caller+0x10d/0x1a0
Oct 18 07:52:20 localhost kernel: [ 8.922350] [<ffffffffa0630a00>] ? nouveau_bios_shadow_prom+0x220/0x220 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.923572] [<ffffffffa06307e0>] ? nouveau_bios_shadow+0x390/0x390 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.924745] [<ffffffffa0630270>] ? nouveau_bios_shadow_pci+0xc0/0xc0 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.925913] [<ffffffffa06301b0>] ? nouveau_bios_dtor+0x30/0x30 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.927063] [<ffffffffa0630c45>] nouveau_bios_ctor+0x65/0x420 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.928221] [<ffffffffa062d5f3>] nouveau_object_ctor+0x33/0xc0 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.929431] [<ffffffffa063c75f>] nouveau_devobj_ctor+0x25f/0x740 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.930567] [<ffffffff814b798a>] ? _raw_spin_unlock_irqrestore+0x3a/0x70
Oct 18 07:52:20 localhost kernel: [ 8.931716] [<ffffffffa062d5f3>] nouveau_object_ctor+0x33/0xc0 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.932883] [<ffffffffa062df4b>] nouveau_object_new+0x18b/0x240 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.934021] [<ffffffffa0698ddd>] nouveau_drm_load+0x17d/0x560 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.935143] [<ffffffff81329059>] ? device_register+0x19/0x20
Oct 18 07:52:20 localhost kernel: [ 8.936314] [<ffffffffa00385c9>] ? drm_get_minor+0x259/0x2f0 [drm]
Oct 18 07:52:20 localhost kernel: [ 8.937457] [<ffffffffa003abd6>] drm_get_pci_dev+0x186/0x2d0 [drm]
Oct 18 07:52:20 localhost kernel: [ 8.938590] [<ffffffff8128191d>] ? __pci_set_master+0x4d/0x80
Oct 18 07:52:20 localhost kernel: [ 8.939736] [<ffffffffa06d98cd>] nouveau_drm_probe+0x1ee/0x214 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.940866] [<ffffffff81285e54>] local_pci_probe+0x74/0x100
Oct 18 07:52:20 localhost kernel: [ 8.941989] [<ffffffff81285ff1>] pci_device_probe+0x111/0x120
Oct 18 07:52:20 localhost kernel: [ 8.943134] [<ffffffff8132b706>] driver_probe_device+0x76/0x220
Oct 18 07:52:20 localhost kernel: [ 8.944258] [<ffffffff8132b953>] __driver_attach+0xa3/0xb0
Oct 18 07:52:20 localhost kernel: [ 8.945363] [<ffffffff8132b8b0>] ? driver_probe_device+0x220/0x220
Oct 18 07:52:20 localhost kernel: [ 8.946629] [<ffffffff813299cd>] bus_for_each_dev+0x4d/0x90
Oct 18 07:52:20 localhost kernel: [ 8.947726] [<ffffffff8132b179>] driver_attach+0x19/0x20
Oct 18 07:52:20 localhost kernel: [ 8.948821] [<ffffffff8132ae20>] bus_add_driver+0x1a0/0x270
Oct 18 07:52:20 localhost kernel: [ 8.949905] [<ffffffffa054b000>] ? 0xffffffffa054afff
Oct 18 07:52:20 localhost kernel: [ 8.950968] [<ffffffff8132bfc2>] driver_register+0x72/0x170
Oct 18 07:52:20 localhost kernel: [ 8.951994] [<ffffffffa054b000>] ? 0xffffffffa054afff
Oct 18 07:52:20 localhost kernel: [ 8.953083] [<ffffffff81284c6c>] __pci_register_driver+0x5c/0x70
Oct 18 07:52:20 localhost kernel: [ 8.954179] [<ffffffffa003ae3a>] drm_pci_init+0x11a/0x130 [drm]
Oct 18 07:52:20 localhost kernel: [ 8.955264] [<ffffffff81325f40>] ? vga_switcheroo_register_handler+0x40/0x90
Oct 18 07:52:20 localhost kernel: [ 8.956319] [<ffffffffa054b000>] ? 0xffffffffa054afff
Oct 18 07:52:20 localhost kernel: [ 8.957282] [<ffffffffa054b04d>] nouveau_drm_init+0x4d/0x1000 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.958206] [<ffffffff810002da>] do_one_initcall+0x11a/0x170
Oct 18 07:52:20 localhost kernel: [ 8.959096] [<ffffffff810a0dbb>] sys_init_module+0xbb/0x220
Oct 18 07:52:20 localhost kernel: [ 8.959960] [<ffffffff814bf856>] system_call_fastpath+0x1a/0x1f
Oct 18 07:52:20 localhost kernel: [ 8.960808] Code: c8 00 00 00 48 63 f8 e9 6d ff ff ff 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 48 8b 87 d0 00 00 00 48 85 c0 74 05 <80> 38 55 74 26 31 c0 48 c7 c1 16 35 6e a0 ba 03 00 00 00 48 c7
Oct 18 07:52:20 localhost kernel: [ 8.962850] RIP [<ffffffffa0630395>] nouveau_bios_score+0x15/0xd0 [nouveau]
Oct 18 07:52:20 localhost kernel: [ 8.963803] RSP <ffff88033c065818>
Oct 18 07:52:20 localhost kernel: [ 8.964737] CR2: 0000000000000010
Oct 18 07:52:20 localhost kernel: [ 8.965680] ---[ end trace 5fce019b56fa0528 ]---
Oct 18 07:52:20 localhost kernel: [ 9.021854] Linux video capture interface: v2.00
Oct 18 07:52:20 localhost kernel: [ 9.166609] Bluetooth: Core ver 2.16
Oct 18 07:52:20 localhost kernel: [ 9.167613] NET: Registered protocol family 31
Oct 18 07:52:20 localhost kernel: [ 9.168590] Bluetooth: HCI device and connection manager initialized
Oct 18 07:52:20 localhost kernel: [ 9.169612] Bluetooth: HCI socket layer initialized
Oct 18 07:52:20 localhost kernel: [ 9.170594] Bluetooth: L2CAP socket layer initialized
Oct 18 07:52:20 localhost kernel: [ 9.171578] Bluetooth: SCO socket layer initialized
Oct 18 07:52:20 localhost kernel: [ 9.424721] ath: EEPROM regdomain: 0x60
Oct 18 07:52:20 localhost kernel: [ 9.425869] ath: EEPROM indicates we should expect a direct regpair map
Oct 18 07:52:20 localhost kernel: [ 9.426884] ath: Country alpha2 being used: 00
Oct 18 07:52:20 localhost kernel: [ 9.427752] ath: Regpair used: 0x60
Oct 18 07:52:20 localhost kernel: [ 9.445768] uvcvideo: Found UVC 1.00 device USB2.0 UVC 2M WebCam (13d3:5122)
Oct 18 07:52:20 localhost kernel: [ 9.457539] input: USB2.0 UVC 2M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
Oct 18 07:52:20 localhost kernel: [ 9.458637] usbcore: registered new interface driver uvcvideo
Oct 18 07:52:20 localhost kernel: [ 9.459736] USB Video Class driver (1.1.1)
Oct 18 07:52:20 localhost kernel: [ 9.462143] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
Oct 18 07:52:20 localhost kernel: [ 9.463394] Registered led device: ath9k-phy0
Oct 18 07:52:20 localhost kernel: [ 9.464403] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90006aa0000, irq=17
Oct 18 07:52:20 localhost kernel: [ 9.477838] usbcore: registered new interface driver btusb
Oct 18 07:52:20 localhost kernel: [ 9.490768] Bluetooth: Firmware file "ath3k-1.fw" not found
Oct 18 07:52:20 localhost kernel: [ 9.491827] ath3k: probe of 1-1.1:1.0 failed with error -2
Oct 18 07:52:20 localhost kernel: [ 9.492871] usbcore: registered new interface driver ath3k
Oct 18 07:52:20 localhost kernel: [ 10.258843] EXT4-fs (dm-0): re-mounted. Opts: commit=300
Oct 18 07:52:20 localhost kernel: [ 11.143233] md: md0 stopped.
Oct 18 07:52:20 localhost kernel: [ 11.146838] md: bind<sdb1>
Oct 18 07:52:20 localhost kernel: [ 11.152438] md: bind<sda1>
Oct 18 07:52:20 localhost kernel: [ 11.213070] md: raid1 personality registered for level 1
Oct 18 07:52:20 localhost kernel: [ 11.214774] md/raid1:md0: active with 2 out of 2 mirrors
Oct 18 07:52:20 localhost kernel: [ 11.216183] md0: detected capacity change from 0 to 509804544
Oct 18 07:52:20 localhost kernel: [ 11.220499] md0: unknown partition table
Oct 18 07:52:20 localhost kernel: [ 11.835554] kjournald starting. Commit interval 300 seconds
Oct 18 07:52:20 localhost kernel: [ 11.842696] EXT3-fs (md0): using internal journal
Oct 18 07:52:20 localhost kernel: [ 11.844088] EXT3-fs (md0): mounted filesystem with writeback data mode
Oct 18 07:52:20 localhost kernel: [ 11.972360] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: commit=300
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-18 7:32 Linux 3.7-rc1 (nouveau_bios_score oops) Paweł Sikora
@ 2012-10-19 21:25 ` Linus Torvalds
[not found] ` <5081D72C.2080309@labri.fr>
2012-10-20 9:26 ` Heinz Diehl
0 siblings, 2 replies; 25+ messages in thread
From: Linus Torvalds @ 2012-10-19 21:25 UTC (permalink / raw)
To: Paweł Sikora, David Airlie, Ben Skeggs, Martin Peres,
Daniel Vetter
Cc: dri-devel, linux-kernel, marcheu
Added more appropriate people to this. Added both i915 and nouveau
people, since apparently that fine piece of hardware has both.
Guys, any ideas?
Paweł, could you perhaps get a photo of the oops and post it
somewhere? I'm assuming the oops happens early during boot and you
never get a usable machine with dmesg - but if you do, then please do
post the whole dmesg too.
Linus
On Thu, Oct 18, 2012 at 12:32 AM, Paweł Sikora <pawel.sikora@agmk.net> wrote:
> Hi,
>
> the new 3.7.0-rc1-00078-g8d2b6b3 kernel oopses during startup on my asus laptop
> with nvidia optimius crap and the builtin core-i7 graphics doesn't start.
> the 3.5/3.6 kernels work fine, so this looks like a fresh regression.
>
> BR,
> Paweł.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
[not found] ` <5081D72C.2080309@labri.fr>
@ 2012-10-19 22:52 ` Linus Torvalds
0 siblings, 0 replies; 25+ messages in thread
From: Linus Torvalds @ 2012-10-19 22:52 UTC (permalink / raw)
To: Martin Peres
Cc: Paweł Sikora, David Airlie, Ben Skeggs, Daniel Vetter,
dri-devel, linux-kernel, marcheu
On Fri, Oct 19, 2012 at 3:41 PM, Martin Peres <martin.peres@labri.fr> wrote:
>
> You must have missed the oops that was attached to the mail:
> http://www.spinics.net/lists/kernel/msg1420355.html
I did indeed. So never mind about that dmesg request, Paweł ;-p
> Paweł, could you try the attached patch please ?
Thanks for being on it,
Linus
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-19 21:25 ` Linus Torvalds
[not found] ` <5081D72C.2080309@labri.fr>
@ 2012-10-20 9:26 ` Heinz Diehl
2012-10-20 9:40 ` Martin Peres
1 sibling, 1 reply; 25+ messages in thread
From: Heinz Diehl @ 2012-10-20 9:26 UTC (permalink / raw)
To: Linus Torvalds
Cc: Paweł Sikora, David Airlie, Ben Skeggs, Martin Peres,
Daniel Vetter, dri-devel, linux-kernel, marcheu
On 20.10.2012, Linus Torvalds wrote:
> Added more appropriate people to this. Added both i915 and nouveau
> people, since apparently that fine piece of hardware has both.
>
> Guys, any ideas?
Plese see https://lkml.org/lkml/2012/10/19/371 , this is the same
thing going on. Reverting
Ben Skeggs <bskeggs@redhat.com>
drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB
fixes the problem.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 9:26 ` Heinz Diehl
@ 2012-10-20 9:40 ` Martin Peres
2012-10-20 10:42 ` Heinz Diehl
2012-10-25 17:53 ` Paweł Sikora
0 siblings, 2 replies; 25+ messages in thread
From: Martin Peres @ 2012-10-20 9:40 UTC (permalink / raw)
To: Heinz Diehl
Cc: Linus Torvalds, Paweł Sikora, David Airlie, Ben Skeggs,
Daniel Vetter, dri-devel, linux-kernel, marcheu
[-- Attachment #1: Type: text/plain, Size: 607 bytes --]
On 20/10/2012 11:26, Heinz Diehl wrote:
> On 20.10.2012, Linus Torvalds wrote:
>
>> Added more appropriate people to this. Added both i915 and nouveau
>> people, since apparently that fine piece of hardware has both.
>>
>> Guys, any ideas?
>
> Plese see https://lkml.org/lkml/2012/10/19/371 , this is the same
> thing going on. Reverting
>
> Ben Skeggs <bskeggs@redhat.com>
> drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB
>
> fixes the problem.
Can you test the attached patch too ? I rebased the previous one I sent
on top on 3.7-rc1 as I accidentally used an older version.
Martin
[-- Attachment #2: 0001-drm-nouveau-bios-improve-error-handling-when-reading.patch --]
[-- Type: text/x-patch, Size: 1024 bytes --]
>From f09d58dc23a6e48ed56a1d9bf803f800f0c59e83 Mon Sep 17 00:00:00 2001
From: Martin Peres <martin.peres@labri.fr>
Date: Sat, 20 Oct 2012 11:03:36 +0200
Subject: [PATCH] drm/nouveau/bios: improve error handling when reading the
vbios from ACPI
Reported-by: Pawel Sikora <pawel.sikora@agmk.net>
Signed-off-by: Martin Peres <martin.peres@labri.fr>
---
drivers/gpu/drm/nouveau/core/subdev/bios/base.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
index 619e7e0..519a3b3 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
@@ -188,8 +188,10 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios)
int ret, cnt, i;
u8 data[3];
- if (!nouveau_acpi_rom_supported(pdev))
+ if (!nouveau_acpi_rom_supported(pdev)) {
+ bios->data = NULL;
return;
+ }
bios->size = 0;
if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
--
1.7.12.4
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 9:40 ` Martin Peres
@ 2012-10-20 10:42 ` Heinz Diehl
2012-10-20 20:28 ` Marcin Slusarz
2012-10-25 17:53 ` Paweł Sikora
1 sibling, 1 reply; 25+ messages in thread
From: Heinz Diehl @ 2012-10-20 10:42 UTC (permalink / raw)
To: Martin Peres
Cc: Heinz Diehl, Linus Torvalds, Paweł Sikora, David Airlie,
Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel, marcheu
On 20.10.2012, Martin Peres wrote:
> Can you test the attached patch too ? I rebased the previous one I sent on
> top on 3.7-rc1 as I accidentally used an older version.
Yes, of course.
Tried it. Unfortunately, the crash remains the same as reported.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 10:42 ` Heinz Diehl
@ 2012-10-20 20:28 ` Marcin Slusarz
2012-10-20 20:35 ` Marcin Slusarz
2012-10-20 21:20 ` Heinz Diehl
0 siblings, 2 replies; 25+ messages in thread
From: Marcin Slusarz @ 2012-10-20 20:28 UTC (permalink / raw)
To: Heinz Diehl
Cc: Martin Peres, Heinz Diehl, Linus Torvalds, Paweł Sikora,
David Airlie, Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel,
marcheu
On Sat, Oct 20, 2012 at 12:42:38PM +0200, Heinz Diehl wrote:
> On 20.10.2012, Martin Peres wrote:
>
> > Can you test the attached patch too ? I rebased the previous one I sent on
> > top on 3.7-rc1 as I accidentally used an older version.
>
> Yes, of course.
>
> Tried it. Unfortunately, the crash remains the same as reported.
Try this one.
Now, the question is: could 3.6 kernel get VBIOS by ACPI?
If yes, please mount debugfs and send vbios.rom to me please.
(cat /sys/kernel/debug/dri/0/vbios.rom > vbios.rom)
---
From: Marcin Slusarz <marcin.slusarz@gmail.com>
Subject: [PATCH] drm/nouveau: validate vbios size
Without checking, we could detect vbios size as 0, allocate 0-byte array
(kmalloc returns invalid pointer for such allocation) and crash in
nouveau_bios_score while checking for vbios signature.
Reported-by: Heinz Diehl <htd@fritha.org>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
---
drivers/gpu/drm/nouveau/core/subdev/bios/base.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
index dcb5c2b..824eea0 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
@@ -72,7 +72,7 @@ nouveau_bios_shadow_of(struct nouveau_bios *bios)
}
data = of_get_property(dn, "NVDA,BMP", &size);
- if (data) {
+ if (data && size) {
bios->size = size;
bios->data = kmalloc(bios->size, GFP_KERNEL);
if (bios->data)
@@ -104,6 +104,9 @@ nouveau_bios_shadow_pramin(struct nouveau_bios *bios)
goto out;
bios->size = nv_rd08(bios, 0x700002) * 512;
+ if (!bios->size)
+ goto out;
+
bios->data = kmalloc(bios->size, GFP_KERNEL);
if (bios->data) {
for (i = 0; i < bios->size; i++)
@@ -155,6 +158,9 @@ nouveau_bios_shadow_prom(struct nouveau_bios *bios)
/* read entire bios image to system memory */
bios->size = nv_rd08(bios, 0x300002) * 512;
+ if (!bios->size)
+ goto out;
+
bios->data = kmalloc(bios->size, GFP_KERNEL);
if (bios->data) {
for (i = 0; i < bios->size; i++)
@@ -194,6 +200,8 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios)
bios->size = 0;
if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
bios->size = data[2] * 512;
+ if (!bios->size)
+ return;
bios->data = kmalloc(bios->size, GFP_KERNEL);
for (i = 0; bios->data && i < bios->size; i += cnt) {
@@ -229,12 +237,14 @@ nouveau_bios_shadow_pci(struct nouveau_bios *bios)
static int
nouveau_bios_score(struct nouveau_bios *bios, const bool writeable)
{
- if (!bios->data || bios->data[0] != 0x55 || bios->data[1] != 0xAA) {
+ if (bios->size < 3 || !bios->data || bios->data[0] != 0x55 ||
+ bios->data[1] != 0xAA) {
nv_info(bios, "... signature not found\n");
return 0;
}
- if (nvbios_checksum(bios->data, bios->data[2] * 512)) {
+ if (nvbios_checksum(bios->data,
+ min_t(u32, bios->data[2] * 512, bios->size))) {
nv_info(bios, "... checksum invalid\n");
/* if a ro image is somewhat bad, it's probably all rubbish */
return writeable ? 2 : 1;
--
1.7.12
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 20:28 ` Marcin Slusarz
@ 2012-10-20 20:35 ` Marcin Slusarz
2012-10-20 21:20 ` Heinz Diehl
1 sibling, 0 replies; 25+ messages in thread
From: Marcin Slusarz @ 2012-10-20 20:35 UTC (permalink / raw)
To: Heinz Diehl
Cc: Martin Peres, Heinz Diehl, Linus Torvalds, Paweł Sikora,
David Airlie, Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel,
marcheu
On Sat, Oct 20, 2012 at 10:28:46PM +0200, Marcin Slusarz wrote:
> On Sat, Oct 20, 2012 at 12:42:38PM +0200, Heinz Diehl wrote:
> > On 20.10.2012, Martin Peres wrote:
> >
> > > Can you test the attached patch too ? I rebased the previous one I sent on
> > > top on 3.7-rc1 as I accidentally used an older version.
> >
> > Yes, of course.
> >
> > Tried it. Unfortunately, the crash remains the same as reported.
>
> Try this one.
>
> Now, the question is: could 3.6 kernel get VBIOS by ACPI?
> If yes, please mount debugfs and send vbios.rom to me please.
> (cat /sys/kernel/debug/dri/0/vbios.rom > vbios.rom)
>
> ---
> From: Marcin Slusarz <marcin.slusarz@gmail.com>
> Subject: [PATCH] drm/nouveau: validate vbios size
>
> Without checking, we could detect vbios size as 0, allocate 0-byte array
> (kmalloc returns invalid pointer for such allocation) and crash in
> nouveau_bios_score while checking for vbios signature.
>
> Reported-by: Heinz Diehl <htd@fritha.org>
And of course:
Reported-by: Paweł Sikora <pawel.sikora@agmk.net>
> Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
> ---
> drivers/gpu/drm/nouveau/core/subdev/bios/base.c | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> index dcb5c2b..824eea0 100644
> --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> @@ -72,7 +72,7 @@ nouveau_bios_shadow_of(struct nouveau_bios *bios)
> }
>
> data = of_get_property(dn, "NVDA,BMP", &size);
> - if (data) {
> + if (data && size) {
> bios->size = size;
> bios->data = kmalloc(bios->size, GFP_KERNEL);
> if (bios->data)
> @@ -104,6 +104,9 @@ nouveau_bios_shadow_pramin(struct nouveau_bios *bios)
> goto out;
>
> bios->size = nv_rd08(bios, 0x700002) * 512;
> + if (!bios->size)
> + goto out;
> +
> bios->data = kmalloc(bios->size, GFP_KERNEL);
> if (bios->data) {
> for (i = 0; i < bios->size; i++)
> @@ -155,6 +158,9 @@ nouveau_bios_shadow_prom(struct nouveau_bios *bios)
>
> /* read entire bios image to system memory */
> bios->size = nv_rd08(bios, 0x300002) * 512;
> + if (!bios->size)
> + goto out;
> +
> bios->data = kmalloc(bios->size, GFP_KERNEL);
> if (bios->data) {
> for (i = 0; i < bios->size; i++)
> @@ -194,6 +200,8 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios)
> bios->size = 0;
> if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
> bios->size = data[2] * 512;
> + if (!bios->size)
> + return;
>
> bios->data = kmalloc(bios->size, GFP_KERNEL);
> for (i = 0; bios->data && i < bios->size; i += cnt) {
> @@ -229,12 +237,14 @@ nouveau_bios_shadow_pci(struct nouveau_bios *bios)
> static int
> nouveau_bios_score(struct nouveau_bios *bios, const bool writeable)
> {
> - if (!bios->data || bios->data[0] != 0x55 || bios->data[1] != 0xAA) {
> + if (bios->size < 3 || !bios->data || bios->data[0] != 0x55 ||
> + bios->data[1] != 0xAA) {
> nv_info(bios, "... signature not found\n");
> return 0;
> }
>
> - if (nvbios_checksum(bios->data, bios->data[2] * 512)) {
> + if (nvbios_checksum(bios->data,
> + min_t(u32, bios->data[2] * 512, bios->size))) {
> nv_info(bios, "... checksum invalid\n");
> /* if a ro image is somewhat bad, it's probably all rubbish */
> return writeable ? 2 : 1;
> --
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 20:28 ` Marcin Slusarz
2012-10-20 20:35 ` Marcin Slusarz
@ 2012-10-20 21:20 ` Heinz Diehl
2012-10-20 21:42 ` Marcin Slusarz
2012-10-20 22:19 ` Marcin Slusarz
1 sibling, 2 replies; 25+ messages in thread
From: Heinz Diehl @ 2012-10-20 21:20 UTC (permalink / raw)
To: Marcin Slusarz
Cc: Martin Peres, Heinz Diehl, Linus Torvalds, Paweł Sikora,
David Airlie, Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel,
marcheu
On 20.10.2012, Marcin Slusarz wrote:
> Try this one.
It works, now I can boot again. However, nouveau seems to be dead now.
The dmesg output with your patch on top of 3.7-rc1 is:
[ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1
[ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
[ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536)
[ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT
[ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image...
[ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents
[ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image
[ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22
[ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22
[ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22
[ 3.740523] dracut: Starting plymouth daemon
And here's the same output with plain vanilla 3.6.2:
[ 3.588791] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8800b1)
[ 3.599783] vga_switcheroo: enabled
[ 3.601303] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 3.602817] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 3.604294] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
[ 3.605822] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[ 3.607310] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
[ 3.856854] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 3.859409] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
[ 3.861907] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 3.864369] [drm] nouveau 0000:01:00.0: Bios version 70.18.5d.00
[ 3.866829] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 3.869479] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 3.870871] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 3.872220] [drm] nouveau 0000:01:00.0: DCB outp 00: 02014300 00000000
[ 3.873611] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
[ 3.874994] [drm] nouveau 0000:01:00.0: DCB conn 01: 00410146
[ 3.876367] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001261
[ 3.877719] [drm] nouveau 0000:01:00.0: DCB conn 03: 00002330
[ 3.879043] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000400
[ 3.880355] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000560
[ 3.881662] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[ 3.882961] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDECD
[ 3.936538] [drm] nouveau 0000:01:00.0: 0xDE34: i2c wr fail: -6
[ 3.957932] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE378
[ 3.987046] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEF4B
[ 3.988396] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEF64
[ 3.990741] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF04B
[ 3.992020] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF0B0
[ 4.018084] [TTM] Zone kernel: Available graphics memory: 1917766 kiB
[ 4.019438] [TTM] Initializing pool allocator
[ 4.020694] [TTM] Initializing DMA pool allocator
[ 4.021914] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3)
[ 4.024515] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 4.083748] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 4.084909] [drm] No driver support for vblank timestamp query.
[ 4.085985] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[ 4.246449] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[ 4.247560] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
[ 4.248707] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV
[ 4.249807] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV
[ 4.250946] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz
[ 4.289382] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies
[ 4.668174] No connectors reported connected with modes
[ 4.669252] [drm] Cannot find any crtc or sizes - going 1024x768
[ 4.683844] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x2c0000, bo ffff88013ab53400
[ 4.685057] fb1: nouveaufb frame buffer device
[ 4.686244] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1
[ 4.691233] dracut: Starting plymouth daemon
> Now, the question is: could 3.6 kernel get VBIOS by ACPI?
> If yes, please mount debugfs and send vbios.rom to me please.
> (cat /sys/kernel/debug/dri/0/vbios.rom > vbios.rom)
There's no such file on my machine (with mounted debugfs, of course).
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 21:20 ` Heinz Diehl
@ 2012-10-20 21:42 ` Marcin Slusarz
2012-10-20 21:45 ` Marcin Slusarz
2012-10-21 8:54 ` Heinz Diehl
2012-10-20 22:19 ` Marcin Slusarz
1 sibling, 2 replies; 25+ messages in thread
From: Marcin Slusarz @ 2012-10-20 21:42 UTC (permalink / raw)
To: Heinz Diehl
Cc: Martin Peres, Heinz Diehl, Linus Torvalds, Paweł Sikora,
David Airlie, Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel,
marcheu
On Sat, Oct 20, 2012 at 11:20:36PM +0200, Heinz Diehl wrote:
> On 20.10.2012, Marcin Slusarz wrote:
>
> > Try this one.
>
> It works, now I can boot again. However, nouveau seems to be dead now.
> The dmesg output with your patch on top of 3.7-rc1 is:
>
> [ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1
> [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
> [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50
> [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
> [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
> [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
> [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
> [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536)
> [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT
> [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image...
> [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents
> [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image
> [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22
> [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22
> [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22
> [ 3.740523] dracut: Starting plymouth daemon
>
> And here's the same output with plain vanilla 3.6.2:
>
> [ 3.588791] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8800b1)
> [ 3.599783] vga_switcheroo: enabled
> [ 3.601303] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
> [ 3.602817] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
> [ 3.604294] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
> [ 3.605822] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
> [ 3.607310] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
> [ 3.856854] [drm] nouveau 0000:01:00.0: ... appears to be valid
> [ 3.859409] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
> [ 3.861907] [drm] nouveau 0000:01:00.0: BIT BIOS found
> [ 3.864369] [drm] nouveau 0000:01:00.0: Bios version 70.18.5d.00
> [ 3.866829] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
> [ 3.869479] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
> [ 3.870871] [drm] nouveau 0000:01:00.0: DCB version 4.0
> [ 3.872220] [drm] nouveau 0000:01:00.0: DCB outp 00: 02014300 00000000
> [ 3.873611] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
> [ 3.874994] [drm] nouveau 0000:01:00.0: DCB conn 01: 00410146
> [ 3.876367] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001261
> [ 3.877719] [drm] nouveau 0000:01:00.0: DCB conn 03: 00002330
> [ 3.879043] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000400
> [ 3.880355] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000560
> [ 3.881662] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
> [ 3.882961] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDECD
> [ 3.936538] [drm] nouveau 0000:01:00.0: 0xDE34: i2c wr fail: -6
> [ 3.957932] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE378
> [ 3.987046] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEF4B
> [ 3.988396] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEF64
> [ 3.990741] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF04B
> [ 3.992020] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF0B0
> [ 4.018084] [TTM] Zone kernel: Available graphics memory: 1917766 kiB
> [ 4.019438] [TTM] Initializing pool allocator
> [ 4.020694] [TTM] Initializing DMA pool allocator
> [ 4.021914] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3)
> [ 4.024515] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
> [ 4.083748] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 4.084909] [drm] No driver support for vblank timestamp query.
> [ 4.085985] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
> [ 4.246449] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
> [ 4.247560] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
> [ 4.248707] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV
> [ 4.249807] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV
> [ 4.250946] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz
> [ 4.289382] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies
> [ 4.668174] No connectors reported connected with modes
> [ 4.669252] [drm] Cannot find any crtc or sizes - going 1024x768
> [ 4.683844] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x2c0000, bo ffff88013ab53400
> [ 4.685057] fb1: nouveaufb frame buffer device
> [ 4.686244] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1
> [ 4.691233] dracut: Starting plymouth daemon
>
> > Now, the question is: could 3.6 kernel get VBIOS by ACPI?
> > If yes, please mount debugfs and send vbios.rom to me please.
> > (cat /sys/kernel/debug/dri/0/vbios.rom > vbios.rom)
>
> There's no such file on my machine (with mounted debugfs, of course).
On 3.6 kernel? (It doesn't exist on 3.7)
Note that it may be in other directory than "0".
Marcin
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 21:42 ` Marcin Slusarz
@ 2012-10-20 21:45 ` Marcin Slusarz
2012-10-21 8:54 ` Heinz Diehl
1 sibling, 0 replies; 25+ messages in thread
From: Marcin Slusarz @ 2012-10-20 21:45 UTC (permalink / raw)
To: Heinz Diehl
Cc: Martin Peres, Heinz Diehl, Linus Torvalds, Paweł Sikora,
David Airlie, Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel,
marcheu
On Sat, Oct 20, 2012 at 11:42:17PM +0200, Marcin Slusarz wrote:
> On Sat, Oct 20, 2012 at 11:20:36PM +0200, Heinz Diehl wrote:
> > On 20.10.2012, Marcin Slusarz wrote:
> >
> > > Try this one.
> >
> > It works, now I can boot again. However, nouveau seems to be dead now.
> > The dmesg output with your patch on top of 3.7-rc1 is:
> >
> > [ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> > [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1
> > [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
> > [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50
> > [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
> > [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
> > [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
> > [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
> > [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536)
> > [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT
> > [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image...
> > [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents
> > [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image
> > [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22
> > [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22
> > [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22
> > [ 3.740523] dracut: Starting plymouth daemon
> >
> > And here's the same output with plain vanilla 3.6.2:
> >
> > [ 3.588791] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x0a8800b1)
> > [ 3.599783] vga_switcheroo: enabled
> > [ 3.601303] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
> > [ 3.602817] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
> > [ 3.604294] [drm] nouveau 0000:01:00.0: Checking PROM for VBIOS
> > [ 3.605822] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
> > [ 3.607310] [drm] nouveau 0000:01:00.0: Checking ACPI for VBIOS
> > [ 3.856854] [drm] nouveau 0000:01:00.0: ... appears to be valid
> > [ 3.859409] [drm] nouveau 0000:01:00.0: Using VBIOS from ACPI
> > [ 3.861907] [drm] nouveau 0000:01:00.0: BIT BIOS found
> > [ 3.864369] [drm] nouveau 0000:01:00.0: Bios version 70.18.5d.00
> > [ 3.866829] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
> > [ 3.869479] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
> > [ 3.870871] [drm] nouveau 0000:01:00.0: DCB version 4.0
> > [ 3.872220] [drm] nouveau 0000:01:00.0: DCB outp 00: 02014300 00000000
> > [ 3.873611] [drm] nouveau 0000:01:00.0: DCB conn 00: 00000040
> > [ 3.874994] [drm] nouveau 0000:01:00.0: DCB conn 01: 00410146
> > [ 3.876367] [drm] nouveau 0000:01:00.0: DCB conn 02: 00001261
> > [ 3.877719] [drm] nouveau 0000:01:00.0: DCB conn 03: 00002330
> > [ 3.879043] [drm] nouveau 0000:01:00.0: DCB conn 04: 00000400
> > [ 3.880355] [drm] nouveau 0000:01:00.0: DCB conn 05: 00000560
> > [ 3.881662] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
> > [ 3.882961] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDECD
> > [ 3.936538] [drm] nouveau 0000:01:00.0: 0xDE34: i2c wr fail: -6
> > [ 3.957932] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE378
> > [ 3.987046] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEF4B
> > [ 3.988396] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEF64
> > [ 3.990741] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF04B
> > [ 3.992020] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xF0B0
> > [ 4.018084] [TTM] Zone kernel: Available graphics memory: 1917766 kiB
> > [ 4.019438] [TTM] Initializing pool allocator
> > [ 4.020694] [TTM] Initializing DMA pool allocator
> > [ 4.021914] [drm] nouveau 0000:01:00.0: Detected 1024MiB VRAM (DDR3)
> > [ 4.024515] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
> > [ 4.083748] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> > [ 4.084909] [drm] No driver support for vblank timestamp query.
> > [ 4.085985] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
> > [ 4.246449] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
> > [ 4.247560] [drm] nouveau 0000:01:00.0: 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
> > [ 4.248707] [drm] nouveau 0000:01:00.0: 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV
> > [ 4.249807] [drm] nouveau 0000:01:00.0: 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV
> > [ 4.250946] [drm] nouveau 0000:01:00.0: c: core 405MHz shader 810MHz memory 405MHz
> > [ 4.289382] [drm] nouveau 0000:01:00.0: MM: using COPY for buffer copies
> > [ 4.668174] No connectors reported connected with modes
> > [ 4.669252] [drm] Cannot find any crtc or sizes - going 1024x768
> > [ 4.683844] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x2c0000, bo ffff88013ab53400
> > [ 4.685057] fb1: nouveaufb frame buffer device
> > [ 4.686244] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 1
> > [ 4.691233] dracut: Starting plymouth daemon
> >
> > > Now, the question is: could 3.6 kernel get VBIOS by ACPI?
> > > If yes, please mount debugfs and send vbios.rom to me please.
> > > (cat /sys/kernel/debug/dri/0/vbios.rom > vbios.rom)
> >
> > There's no such file on my machine (with mounted debugfs, of course).
>
> On 3.6 kernel? (It doesn't exist on 3.7)
> Note that it may be in other directory than "0".
Oh, you need CONFIG_DRM_NOUVEAU_DEBUG too.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 21:20 ` Heinz Diehl
2012-10-20 21:42 ` Marcin Slusarz
@ 2012-10-20 22:19 ` Marcin Slusarz
2012-10-21 6:58 ` Paweł Sikora
2012-10-22 0:07 ` Ben Skeggs
1 sibling, 2 replies; 25+ messages in thread
From: Marcin Slusarz @ 2012-10-20 22:19 UTC (permalink / raw)
To: Heinz Diehl
Cc: Martin Peres, Heinz Diehl, Linus Torvalds, Paweł Sikora,
David Airlie, Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel,
marcheu
On Sat, Oct 20, 2012 at 11:20:36PM +0200, Heinz Diehl wrote:
> On 20.10.2012, Marcin Slusarz wrote:
>
> > Try this one.
>
> It works, now I can boot again. However, nouveau seems to be dead now.
> The dmesg output with your patch on top of 3.7-rc1 is:
>
> [ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1
> [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
> [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50
> [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
> [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
> [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
> [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
> [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536)
> [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT
> [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image...
> [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents
> [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image
> [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22
> [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22
> [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22
> [ 3.740523] dracut: Starting plymouth daemon
Hmm, maybe we can't fetch 3 bytes only...
Let's check this:
---
diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
index 824eea0..8bd71aa 100644
--- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
+++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
@@ -192,14 +192,16 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios)
{
struct pci_dev *pdev = nv_device(bios)->pdev;
int ret, cnt, i;
- u8 data[3];
+ u8 *data;
if (!nouveau_acpi_rom_supported(pdev))
return;
bios->size = 0;
- if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
+ data = kmalloc(4096, GFP_KERNEL);
+ if (data && nouveau_acpi_get_bios_chunk(data, 0, 4096) >= 3)
bios->size = data[2] * 512;
+ kfree(data);
if (!bios->size)
return;
---
Please attach acpidump output.
^ permalink raw reply related [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 22:19 ` Marcin Slusarz
@ 2012-10-21 6:58 ` Paweł Sikora
2012-10-21 9:26 ` Heinz Diehl
2012-10-21 12:09 ` Marcin Slusarz
2012-10-22 0:07 ` Ben Skeggs
1 sibling, 2 replies; 25+ messages in thread
From: Paweł Sikora @ 2012-10-21 6:58 UTC (permalink / raw)
To: Marcin Slusarz
Cc: Heinz Diehl, Martin Peres, Heinz Diehl, Linus Torvalds,
David Airlie, Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel,
marcheu
On Sunday 21 of October 2012 00:19:48 Marcin Slusarz wrote:
> On Sat, Oct 20, 2012 at 11:20:36PM +0200, Heinz Diehl wrote:
> > On 20.10.2012, Marcin Slusarz wrote:
> >
> > > Try this one.
> >
> > It works, now I can boot again. However, nouveau seems to be dead now.
> > The dmesg output with your patch on top of 3.7-rc1 is:
> >
> > [ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> > [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1
> > [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
> > [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50
> > [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
> > [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
> > [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
> > [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
> > [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536)
> > [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT
> > [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image...
> > [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents
> > [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image
> > [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22
> > [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22
> > [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22
> > [ 3.740523] dracut: Starting plymouth daemon
>
> Hmm, maybe we can't fetch 3 bytes only...
>
> Let's check this:
>
> ---
> diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> index 824eea0..8bd71aa 100644
> --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> @@ -192,14 +192,16 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios)
> {
> struct pci_dev *pdev = nv_device(bios)->pdev;
> int ret, cnt, i;
> - u8 data[3];
> + u8 *data;
>
> if (!nouveau_acpi_rom_supported(pdev))
> return;
>
> bios->size = 0;
> - if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
> + data = kmalloc(4096, GFP_KERNEL);
> + if (data && nouveau_acpi_get_bios_chunk(data, 0, 4096) >= 3)
> bios->size = data[2] * 512;
> + kfree(data);
> if (!bios->size)
> return;
with these both patches applied my laptop boots and gui works fine.
here's dmesg:
(...)
[ 8.751795] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 8.751798] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 8.751895] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 8.751898] nouveau [ VBIOS][0000:01:00.0] version 70.08.45.00
[ 8.752366] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 8.752368] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 8.867660] nouveau [ MXM][0000:01:00.0] no VBIOS data, nothing to do
[ 8.867690] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 8.867692] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 8.901523] vga_switcheroo: enabled
[ 8.901979] [TTM] Zone kernel: Available graphics memory: 6104282 kiB
[ 8.901980] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
[ 8.901982] [TTM] Initializing pool allocator
[ 8.902014] [TTM] Initializing DMA pool allocator
[ 8.902180] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
[ 8.902184] nouveau [ DRM] VRAM: 512 MiB
[ 8.902185] nouveau [ DRM] GART: 512 MiB
[ 8.902188] nouveau [ DRM] BIT BIOS found
[ 8.902190] nouveau [ DRM] Bios version 70.08.45.00
[ 8.902192] nouveau [ DRM] TMDS table version 2.0
[ 8.902194] nouveau [ DRM] DCB version 4.0
[ 8.902196] nouveau [ DRM] DCB outp 00: 02011300 00000000
[ 8.902198] nouveau [ DRM] DCB conn 01: 00000100
[ 8.903540] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.903541] [drm] No driver support for vblank timestamp query.
[ 8.903545] nouveau [ DRM] ACPI backlight interface available, not registering our own
[ 8.903938] nouveau [ DRM] 3 available performance level(s)
[ 8.903941] nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV
[ 8.903943] nouveau [ DRM] 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV
[ 8.903946] nouveau [ DRM] 3: core 672MHz shader 1344MHz memory 900MHz voltage 980mV
[ 8.903948] nouveau [ DRM] c: core 202MHz shader 405MHz memory 324MHz voltage 980mV
[ 8.908895] nouveau [ DRM] MM: using COPY1 for buffer copies
[ 8.988695] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88033b5f1800
[ 8.988955] fb1: nouveaufb frame buffer device
[ 8.988959] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 1
(...)
> Please attach acpidump output.
http://pluto.agmk.net/nv/acpidump.txt
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 21:42 ` Marcin Slusarz
2012-10-20 21:45 ` Marcin Slusarz
@ 2012-10-21 8:54 ` Heinz Diehl
1 sibling, 0 replies; 25+ messages in thread
From: Heinz Diehl @ 2012-10-21 8:54 UTC (permalink / raw)
To: Marcin Slusarz
Cc: Martin Peres, Heinz Diehl, Linus Torvalds, Paweł Sikora,
David Airlie, Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel,
marcheu
On 21.10.2012, Marcin Slusarz wrote:
> On 3.6 kernel? (It doesn't exist on 3.7)
> Note that it may be in other directory than "0".
[root@wildsau linux-3.6.2]# cat .config | grep -i "nouveau"
CONFIG_DRM_NOUVEAU=m
CONFIG_DRM_NOUVEAU_BACKLIGHT=y
CONFIG_DRM_NOUVEAU_DEBUG=y
I grepped the whole disk, there's no vbios.rom at all.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-21 6:58 ` Paweł Sikora
@ 2012-10-21 9:26 ` Heinz Diehl
2012-10-21 12:09 ` Marcin Slusarz
1 sibling, 0 replies; 25+ messages in thread
From: Heinz Diehl @ 2012-10-21 9:26 UTC (permalink / raw)
To: Paweł Sikora
Cc: Marcin Slusarz, Martin Peres, Heinz Diehl, Linus Torvalds,
David Airlie, Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel,
marcheu
On 21.10.2012, Paweł Sikora wrote:
> with these both patches applied my laptop boots and gui works fine.
The same here. The two patches together, applied to 3.7-rc1 let my
machine boot again. Here's the relevant dmesg cut:
[ 3.702671] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1
[ 3.704643] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 3.707003] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 3.711393] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
[ 3.712793] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 3.714147] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
[ 3.715578] nouveau [ VBIOS][0000:01:00.0] ... signature not found
[ 3.716969] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
[ 4.207512] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 4.209711] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
[ 4.212469] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 4.214855] nouveau [ VBIOS][0000:01:00.0] version 70.18.5d.00
[ 4.217554] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
[ 4.219922] nouveau [ VBIOS][0000:01:00.0] running init tables
[ 4.342202] nouveau [ MXM][0000:01:00.0] no VBIOS data, nothing to do
[ 4.343590] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 4.344916] nouveau [ PFB][0000:01:00.0] RAM size: 1024 MiB
[ 4.991887] vga_switcheroo: enabled
[ 4.993495] [TTM] Zone kernel: Available graphics memory: 1917720 kiB
[ 4.994911] [TTM] Initializing pool allocator
[ 4.996228] [TTM] Initializing DMA pool allocator
[ 4.998915] nouveau [ DRM] VRAM: 1024 MiB
[ 5.000251] nouveau [ DRM] GART: 512 MiB
[ 5.001579] nouveau [ DRM] BIT BIOS found
[ 5.002904] nouveau [ DRM] Bios version 70.18.5d.00
[ 5.004229] nouveau [ DRM] TMDS table version 2.0
[ 5.005545] nouveau [ DRM] DCB version 4.0
[ 5.006810] nouveau [ DRM] DCB outp 00: 02014300 00000000
[ 5.008115] nouveau [ DRM] DCB conn 00: 00000040
[ 5.009441] nouveau [ DRM] DCB conn 01: 00410146
[ 5.010745] nouveau [ DRM] DCB conn 02: 00001261
[ 5.012019] nouveau [ DRM] DCB conn 03: 00002330
[ 5.013255] nouveau [ DRM] DCB conn 04: 00000400
[ 5.014452] nouveau [ DRM] DCB conn 05: 00000560
[ 5.052344] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.053486] [drm] No driver support for vblank timestamp query.
[ 5.054590] nouveau [ DRM] ACPI backlight interface available,not registering our own
[ 5.356822] nouveau [ DRM] 3 available performance level(s)
[ 5.358682] nouveau [ DRM] 0: core 135MHz shader 270MHz memory 135MHz voltage 850mV
[ 5.360442] nouveau [ DRM] 1: core 405MHz shader 810MHz memory 405MHz voltage 850mV
[ 5.362215] nouveau [ DRM] 3: core 606MHz shader 1468MHz memory 667MHz voltage 1000mV
[ 5.363998] nouveau [ DRM] c: core 405MHz shader 810MHz memory 405MHz
[ 5.404143] nouveau [ DRM] MM: using COPY for buffer copies
[ 5.481593] No connectors reported connected with modes
[ 5.482667] [drm] Cannot find any crtc or sizes - going 1024x768
[ 5.517932] nouveau [ DRM] allocated 1024x768 fb: 0x70000, bo ffff88013a6d3400
[ 5.519236] fb1: nouveaufb frame buffer device
[ 5.520368] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 1
[ 5.527378] dracut: Starting plymouth daemon
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-21 6:58 ` Paweł Sikora
2012-10-21 9:26 ` Heinz Diehl
@ 2012-10-21 12:09 ` Marcin Slusarz
2012-10-21 13:31 ` Heinz Diehl
2012-10-21 14:38 ` Linus Torvalds
1 sibling, 2 replies; 25+ messages in thread
From: Marcin Slusarz @ 2012-10-21 12:09 UTC (permalink / raw)
To: linux-acpi, Len Brown
Cc: Heinz Diehl, Martin Peres, Heinz Diehl, Linus Torvalds,
David Airlie, Ben Skeggs, dri-devel, linux-kernel,
Paweł Sikora
On Sun, Oct 21, 2012 at 08:58:07AM +0200, Paweł Sikora wrote:
> On Sunday 21 of October 2012 00:19:48 Marcin Slusarz wrote:
> > On Sat, Oct 20, 2012 at 11:20:36PM +0200, Heinz Diehl wrote:
> > > On 20.10.2012, Marcin Slusarz wrote:
> > >
> > > > Try this one.
> > >
> > > It works, now I can boot again. However, nouveau seems to be dead now.
> > > The dmesg output with your patch on top of 3.7-rc1 is:
> > >
> > > [ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> > > [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1
> > > [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
> > > [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50
> > > [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
> > > [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > > [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
> > > [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > > [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
> > > [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
> > > [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536)
> > > [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT
> > > [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > > [ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image...
> > > [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents
> > > [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > > [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image
> > > [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22
> > > [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22
> > > [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22
> > > [ 3.740523] dracut: Starting plymouth daemon
> >
> > Hmm, maybe we can't fetch 3 bytes only...
> >
> > Let's check this:
> >
> > ---
> > diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> > index 824eea0..8bd71aa 100644
> > --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> > +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> > @@ -192,14 +192,16 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios)
> > {
> > struct pci_dev *pdev = nv_device(bios)->pdev;
> > int ret, cnt, i;
> > - u8 data[3];
> > + u8 *data;
> >
> > if (!nouveau_acpi_rom_supported(pdev))
> > return;
> >
> > bios->size = 0;
> > - if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
> > + data = kmalloc(4096, GFP_KERNEL);
> > + if (data && nouveau_acpi_get_bios_chunk(data, 0, 4096) >= 3)
> > bios->size = data[2] * 512;
> > + kfree(data);
> > if (!bios->size)
> > return;
>
> with these both patches applied my laptop boots and gui works fine.
> here's dmesg:
>
> (...)
> [ 8.751795] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
> [ 8.751798] nouveau [ VBIOS][0000:01:00.0] using image from ACPI
> [ 8.751895] nouveau [ VBIOS][0000:01:00.0] BIT signature found
> [ 8.751898] nouveau [ VBIOS][0000:01:00.0] version 70.08.45.00
> [ 8.752366] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
> [ 8.752368] nouveau [ VBIOS][0000:01:00.0] running init tables
> [ 8.867660] nouveau [ MXM][0000:01:00.0] no VBIOS data, nothing to do
> [ 8.867690] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
> [ 8.867692] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
> [ 8.901523] vga_switcheroo: enabled
> [ 8.901979] [TTM] Zone kernel: Available graphics memory: 6104282 kiB
> [ 8.901980] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
> [ 8.901982] [TTM] Initializing pool allocator
> [ 8.902014] [TTM] Initializing DMA pool allocator
> [ 8.902180] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
> [ 8.902184] nouveau [ DRM] VRAM: 512 MiB
> [ 8.902185] nouveau [ DRM] GART: 512 MiB
> [ 8.902188] nouveau [ DRM] BIT BIOS found
> [ 8.902190] nouveau [ DRM] Bios version 70.08.45.00
> [ 8.902192] nouveau [ DRM] TMDS table version 2.0
> [ 8.902194] nouveau [ DRM] DCB version 4.0
> [ 8.902196] nouveau [ DRM] DCB outp 00: 02011300 00000000
> [ 8.902198] nouveau [ DRM] DCB conn 01: 00000100
> [ 8.903540] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
> [ 8.903541] [drm] No driver support for vblank timestamp query.
> [ 8.903545] nouveau [ DRM] ACPI backlight interface available, not registering our own
> [ 8.903938] nouveau [ DRM] 3 available performance level(s)
> [ 8.903941] nouveau [ DRM] 0: core 50MHz shader 101MHz memory 135MHz voltage 830mV
> [ 8.903943] nouveau [ DRM] 1: core 202MHz shader 405MHz memory 324MHz voltage 830mV
> [ 8.903946] nouveau [ DRM] 3: core 672MHz shader 1344MHz memory 900MHz voltage 980mV
> [ 8.903948] nouveau [ DRM] c: core 202MHz shader 405MHz memory 324MHz voltage 980mV
> [ 8.908895] nouveau [ DRM] MM: using COPY1 for buffer copies
> [ 8.988695] nouveau [ DRM] allocated 1024x768 fb: 0x60000, bo ffff88033b5f1800
> [ 8.988955] fb1: nouveaufb frame buffer device
> [ 8.988959] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 1
> (...)
>
> > Please attach acpidump output.
>
> http://pluto.agmk.net/nv/acpidump.txt
>
This looks like ACPI bug...
Nouveau calls this method:
Method (_ROM, 2, NotSerialized)// _ROM: Read-Only Memory
{
Add (Arg0, RBUF, Local0)
ShiftLeft (Arg1, 0x03, Local1)
Name (VBUF, Buffer (Arg1) {})
OperationRegion (VROM, SystemMemory, Local0, Local1)
Field (VROM, ByteAcc, NoLock, Preserve)
{
ROMI, 65536
}
Store (ROMI, VBUF)
Return (VBUF)
}
with Arg0 == 0, Arg1 == 3 and gets:
ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGR.GFX0._ROM] (Node ffff88033e47fe88), AE_AML_REGION_LIMIT (20120913/psparse-536)
We can workaround it by aligning Arg1 to 4096 (I'm wondering what is the minimal
value), but do we really have to?
Marcin
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-21 12:09 ` Marcin Slusarz
@ 2012-10-21 13:31 ` Heinz Diehl
2012-10-21 14:38 ` Linus Torvalds
1 sibling, 0 replies; 25+ messages in thread
From: Heinz Diehl @ 2012-10-21 13:31 UTC (permalink / raw)
To: Marcin Slusarz
Cc: linux-acpi, Len Brown, Martin Peres, Heinz Diehl, Linus Torvalds,
David Airlie, Ben Skeggs, dri-devel, linux-kernel,
Paweł Sikora
On 21.10.2012, Marcin Slusarz wrote:
> > > Please attach acpidump output.
> >
> > http://pluto.agmk.net/nv/acpidump.txt
> >
>
> This looks like ACPI bug...
I guess my acpidump didn't make it to the list. Anyway, here it is:
http://www.fritha.org/acpidump.gz
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-21 12:09 ` Marcin Slusarz
2012-10-21 13:31 ` Heinz Diehl
@ 2012-10-21 14:38 ` Linus Torvalds
2012-10-21 14:49 ` Marcin Slusarz
1 sibling, 1 reply; 25+ messages in thread
From: Linus Torvalds @ 2012-10-21 14:38 UTC (permalink / raw)
To: Marcin Slusarz
Cc: linux-acpi, Len Brown, Heinz Diehl, Martin Peres, Heinz Diehl,
David Airlie, Ben Skeggs, dri-devel, linux-kernel,
Paweł Sikora
On Sun, Oct 21, 2012 at 5:09 AM, Marcin Slusarz
<marcin.slusarz@gmail.com> wrote:
>
> This looks like ACPI bug...
I'm _shocked_ to hear that firmware would be fragile.
Anyway, here's the #1 thing to keep in mind about firmware:
- firmware is *always* buggy.
It's that simple. Don't expect anything else. Firmware is written by
people who have lost the will to live (why? Because they do firmware
development for a living), and the only thing keeping them going is
the drugs. And they're not the "fun" kind of drugs. The end result is
predictable. In their drug-induced haze, they make a mess.
So saying "ACPI is buggy" is like saying "water is wet". Deal with it.
> Nouveau calls this method: [...]
>
> with Arg0 == 0, Arg1 == 3 and gets:
>
> ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
> ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEGR.GFX0._ROM] (Node ffff88033e47fe88), AE_AML_REGION_LIMIT (20120913/psparse-536)
>
> We can workaround it by aligning Arg1 to 4096 (I'm wondering what is the minimal
> value), but do we really have to?
Yes, you really have to. You need to understand that ACPI has been
tested with one thing, and one thing only: Windows. Clearly windows
doesn't ask for some three-byte region. So it doesn't work. Big
surprise. Untested code written by monkeys on crack - what did you
expect?
So don't do "clever" things. When it comes to firmware, you need to
expect it to be buggy, and try to access it the way Windows accesses
it.
Now, whether Windows realy always does things with a 4kB-aligned
access, or whether you just need to make sure that you're (say)
4-byte-aligned, I don't know. Maybe doing things four (or eight, or
sixteen) bytes at a time will work. You can try. But if we know from
past experience that a 4kB block-size will work, I'd suggest just
saying
"It's stupid, but stupid is good - we're working with firmware"
Think of firmware the way you think of hardware: it's buggy and needs
workarounds.
Linus
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-21 14:38 ` Linus Torvalds
@ 2012-10-21 14:49 ` Marcin Slusarz
2012-10-21 17:13 ` Linus Torvalds
2012-10-21 20:07 ` Lekensteyn
0 siblings, 2 replies; 25+ messages in thread
From: Marcin Slusarz @ 2012-10-21 14:49 UTC (permalink / raw)
To: Linus Torvalds
Cc: linux-acpi, Len Brown, Heinz Diehl, Martin Peres, Heinz Diehl,
David Airlie, Ben Skeggs, dri-devel, linux-kernel,
Paweł Sikora
On Sun, Oct 21, 2012 at 07:38:58AM -0700, Linus Torvalds wrote:
> On Sun, Oct 21, 2012 at 5:09 AM, Marcin Slusarz
> <marcin.slusarz@gmail.com> wrote:
> >
> > This looks like ACPI bug...
>
> I'm _shocked_ to hear that firmware would be fragile.
>
> Anyway, here's the #1 thing to keep in mind about firmware:
>
> - firmware is *always* buggy.
I know. But this bug is not about broken firmware. It's about Linux kernel
ACPI implementation, which (I think) wrongly interprets ACPI script.
Marcin
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-21 14:49 ` Marcin Slusarz
@ 2012-10-21 17:13 ` Linus Torvalds
2012-10-21 20:07 ` Lekensteyn
1 sibling, 0 replies; 25+ messages in thread
From: Linus Torvalds @ 2012-10-21 17:13 UTC (permalink / raw)
To: Marcin Slusarz
Cc: linux-acpi, Len Brown, Heinz Diehl, Martin Peres, Heinz Diehl,
David Airlie, Ben Skeggs, dri-devel, linux-kernel,
Paweł Sikora
On Sun, Oct 21, 2012 at 5:49 PM, Marcin Slusarz
<marcin.slusarz@gmail.com> wrote:
>
> I know. But this bug is not about broken firmware. It's about Linux kernel
> ACPI implementation, which (I think) wrongly interprets ACPI script.
Hmm. Len, care to comment? Marcin quoted the AML and our arguments in
an earlier thing. I don't read AML, so I was assuming it's the AML
itself that was buggy, not our interpretation of it..
Linus
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-21 14:49 ` Marcin Slusarz
2012-10-21 17:13 ` Linus Torvalds
@ 2012-10-21 20:07 ` Lekensteyn
1 sibling, 0 replies; 25+ messages in thread
From: Lekensteyn @ 2012-10-21 20:07 UTC (permalink / raw)
To: Marcin Slusarz
Cc: Linus Torvalds, linux-acpi, Len Brown, Heinz Diehl, Martin Peres,
Heinz Diehl, David Airlie, Ben Skeggs, dri-devel, linux-kernel,
Paweł Sikora
On Sunday 21 October 2012 16:49:08 Marcin Slusarz wrote:
> On Sun, Oct 21, 2012 at 07:38:58AM -0700, Linus Torvalds wrote:
> > On Sun, Oct 21, 2012 at 5:09 AM, Marcin Slusarz
> >
> > <marcin.slusarz@gmail.com> wrote:
> > > This looks like ACPI bug...
> >
> > I'm shocked to hear that firmware would be fragile.
> >
> > Anyway, here's the #1 thing to keep in mind about firmware:
> >
> > - firmware is always buggy.
>
> I know. But this bug is not about broken firmware. It's about Linux kernel
> ACPI implementation, which (I think) wrongly interprets ACPI script.
The ACPI implementation is fine, it is just the fw engineers that suck. I see I
have not cc'd the linux-vger ml when replying to a previous mail. I'll paste
it below:
Since commit 9a334cd "drm/nouveau/bios: fix shadowing of ACPI ROMs larger than
64KiB" chunks are not always read in multiples of 4KiB anymore (less is
possible). That is the only obvious thing I can think of atm (besides the
kmalloc(0) bug for which Martin submitted a patch in the previous mail).
Do you still still have an Asus laptop with the same BIOS as in
https://bugzilla.kernel.org/show_bug.cgi?id=19702? (if yes, then the acpidump
from that bug still applies).
This is the ACPI _ROM method that is being called:
Method (_ROM, 2, NotSerialized) // _ROM: Read-Only Memory
{
Add (Arg0, RBUF, Local0)
ShiftLeft (Arg1, 0x03, Local1) // times 8, bytes to bits?
Name (VBUF, Buffer (Arg1) {})
OperationRegion (VROM, SystemMemory, Local0, Local1)
Field (VROM, ByteAcc, NoLock, Preserve)
{
ROMI, 65536
}
Store (ROMI, VBUF)
Return (VBUF)
}
Arg0 is the offset (0 when first reading the size), Arg1 is the number of read
bytes (3). Note the use of Local1 in OperationRegion. The meaning there is
bytes, but a multiple of the requested bytes is passed. So if we request 4096
bytes, we end up with a VROM of size 32KiB. ROMI is 65536 bits (or 8192
bytes), hence reading 4096 does not give errors. But reading only 3 bytes will
fail. Martin, I saw your second patch (https://lkml.org/lkml/2012/10/20/150)
which takes care of the first case, but it skips the case where the ROM is of
an odd size (does that even happen, something like 64KiB+1 bytes? No idea.)
Addition: Conclusion: this means that the request must have a length must be
at least 1 KiB or it will fail with the ACPI error that you have seen before.
This AML snippet suck.
Regards,
Peter
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 22:19 ` Marcin Slusarz
2012-10-21 6:58 ` Paweł Sikora
@ 2012-10-22 0:07 ` Ben Skeggs
1 sibling, 0 replies; 25+ messages in thread
From: Ben Skeggs @ 2012-10-22 0:07 UTC (permalink / raw)
To: Marcin Slusarz
Cc: Heinz Diehl, Martin Peres, Heinz Diehl, Linus Torvalds,
Paweł Sikora, David Airlie, Daniel Vetter, dri-devel,
linux-kernel, marcheu
On Sun, 2012-10-21 at 00:19 +0200, Marcin Slusarz wrote:
> On Sat, Oct 20, 2012 at 11:20:36PM +0200, Heinz Diehl wrote:
> > On 20.10.2012, Marcin Slusarz wrote:
> >
> > > Try this one.
> >
> > It works, now I can boot again. However, nouveau seems to be dead now.
> > The dmesg output with your patch on top of 3.7-rc1 is:
> >
> > [ 3.685909] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
> > [ 3.687784] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8800b1
> > [ 3.689960] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
> > [ 3.692471] nouveau [ DEVICE][0000:01:00.0] Family : NV50
> > [ 3.695716] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
> > [ 3.697087] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.698471] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
> > [ 3.699838] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.701223] nouveau [ VBIOS][0000:01:00.0] checking ACPI for image...
> > [ 3.702684] ACPI Error: Field [ROMI] Base+Offset+Width 0+24+1 is beyond end of region [VROM] (length 24) (20120913/exfldio-210)
> > [ 3.704139] ACPI Error: Method parse/execution failed[\_SB_.PCI0.PEG1.GFX0._ROM] (Node ffff880142e85cf8), AE_AML_REGION_LIMIT (20120913/psparse-536)
> > [ 3.716183] failed to evaluate ROM got AE_AML_REGION_LIMIT
> > [ 3.718776] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.721349] nouveau [ VBIOS][0000:01:00.0] checking PCIROM for image...
> > [ 3.724111] nouveau 0000:01:00.0: Invalid ROM contents
> > [ 3.726663] nouveau [ VBIOS][0000:01:00.0] ... signature not found
> > [ 3.729159] nouveau E[ VBIOS][0000:01:00.0] unable to locate usable image
> > [ 3.731677] nouveau E[ DEVICE][0000:01:00.0] failed to create 0x10000001, -22
> > [ 3.734231] nouveau E[ DRM] failed to create 0x80000080, -22
> > [ 3.736097] nouveau: probe of 0000:01:00.0 failed with error -22
> > [ 3.740523] dracut: Starting plymouth daemon
>
> Hmm, maybe we can't fetch 3 bytes only...
Yeah, I noticed this issue myself on a machine here while backporting
the patch to another (older) kernel. I assumed (wrongly, apparently)
that there was just a bug in the older kernel's ACPI implementation that
had been fixed upstream already (I didn't see it on the same machine
with the current kernel)... So, I didn't send the patch.
I'll queue it up with a -fixes batch later today.
Sorry about the trouble,
Ben.
>
> Let's check this:
>
> ---
> diff --git a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> index 824eea0..8bd71aa 100644
> --- a/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> +++ b/drivers/gpu/drm/nouveau/core/subdev/bios/base.c
> @@ -192,14 +192,16 @@ nouveau_bios_shadow_acpi(struct nouveau_bios *bios)
> {
> struct pci_dev *pdev = nv_device(bios)->pdev;
> int ret, cnt, i;
> - u8 data[3];
> + u8 *data;
>
> if (!nouveau_acpi_rom_supported(pdev))
> return;
>
> bios->size = 0;
> - if (nouveau_acpi_get_bios_chunk(data, 0, 3) == 3)
> + data = kmalloc(4096, GFP_KERNEL);
> + if (data && nouveau_acpi_get_bios_chunk(data, 0, 4096) >= 3)
> bios->size = data[2] * 512;
> + kfree(data);
> if (!bios->size)
> return;
>
> ---
>
> Please attach acpidump output.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-20 9:40 ` Martin Peres
2012-10-20 10:42 ` Heinz Diehl
@ 2012-10-25 17:53 ` Paweł Sikora
2012-10-25 18:06 ` Heinz Diehl
1 sibling, 1 reply; 25+ messages in thread
From: Paweł Sikora @ 2012-10-25 17:53 UTC (permalink / raw)
To: Martin Peres
Cc: Heinz Diehl, Linus Torvalds, David Airlie, Ben Skeggs,
Daniel Vetter, dri-devel, linux-kernel, marcheu, Marcin Slusarz,
Lekensteyn
On Saturday 20 of October 2012 11:40:04 Martin Peres wrote:
> On 20/10/2012 11:26, Heinz Diehl wrote:
> > On 20.10.2012, Linus Torvalds wrote:
> >
> >> Added more appropriate people to this. Added both i915 and nouveau
> >> people, since apparently that fine piece of hardware has both.
> >>
> >> Guys, any ideas?
> >
> > Plese see https://lkml.org/lkml/2012/10/19/371 , this is the same
> > thing going on. Reverting
> >
> > Ben Skeggs <bskeggs@redhat.com>
> > drm/nouveau/bios: fix shadowing of ACPI ROMs larger than 64KiB
> >
> > fixes the problem.
>
> Can you test the attached patch too ? I rebased the previous one I sent
> on top on 3.7-rc1 as I accidentally used an older version.
>
> Martin
Hi all once again,
i've tested current 3.7.0-rc2-00145-g4864ccb and it works fine (boots and works
with builtin core-i7 intel video) but i have one more question - what is the reason
of loading nouveau driver for laptops with nvidia optimus and enabling vga switcheroo
which doesn't work in such (optimus) cases. or maybe i've missed something
and switchereoo works with optimus?
BR,
Paweł.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-25 17:53 ` Paweł Sikora
@ 2012-10-25 18:06 ` Heinz Diehl
2012-10-26 19:51 ` Paweł Sikora
0 siblings, 1 reply; 25+ messages in thread
From: Heinz Diehl @ 2012-10-25 18:06 UTC (permalink / raw)
To: Paweł Sikora
Cc: Martin Peres, Heinz Diehl, Linus Torvalds, David Airlie,
Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel, marcheu,
Marcin Slusarz, Lekensteyn
On 25.10.2012, Paweł Sikora wrote:
> what is the reason of loading nouveau driver for laptops
> with nvidia optimus and enabling vga switcheroo
> which doesn't work in such (optimus) cases.
You can safely compile a kernel without nouveau, your Nvidia
card will not be used at all since neither Linux nor the
proprietary nvidia driver does support optimus at this time
(and frankly, I won't buy any further machines with opticrap).
So having nouveau compiled and loaded seems like a waste of ressources
in this case.
For me it's important to have nouveau working, because I try/use
Bumblebee and optirun:
http://bumblebee-project.org/
https://fedoraproject.org/wiki/Bumblebee
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: Linux 3.7-rc1 (nouveau_bios_score oops).
2012-10-25 18:06 ` Heinz Diehl
@ 2012-10-26 19:51 ` Paweł Sikora
0 siblings, 0 replies; 25+ messages in thread
From: Paweł Sikora @ 2012-10-26 19:51 UTC (permalink / raw)
To: Heinz Diehl
Cc: Martin Peres, Heinz Diehl, Linus Torvalds, David Airlie,
Ben Skeggs, Daniel Vetter, dri-devel, linux-kernel, marcheu,
Marcin Slusarz, Lekensteyn
On Thursday 25 of October 2012 20:06:54 Heinz Diehl wrote:
> On 25.10.2012, Paweł Sikora wrote:
>
> > what is the reason of loading nouveau driver for laptops
> > with nvidia optimus and enabling vga switcheroo
> > which doesn't work in such (optimus) cases.
>
> You can safely compile a kernel without nouveau, your Nvidia
> card will not be used at all since neither Linux nor the
> proprietary nvidia driver does support optimus at this time
> (and frankly, I won't buy any further machines with opticrap).
> So having nouveau compiled and loaded seems like a waste of ressources
> in this case.
i've bought this asus laptop mostly for a developer's workstation replacement
(quad-core-i7-avx cpu with integrated gpu, with 12GB ram and 2x500GB hdd).
nvidia's addon is an optional crap :)
> For me it's important to have nouveau working, because I try/use
> Bumblebee and optirun:
>
> http://bumblebee-project.org/
> https://fedoraproject.org/wiki/Bumblebee
i'll try to use transformers too :-)
^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2012-10-26 19:51 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-10-18 7:32 Linux 3.7-rc1 (nouveau_bios_score oops) Paweł Sikora
2012-10-19 21:25 ` Linus Torvalds
[not found] ` <5081D72C.2080309@labri.fr>
2012-10-19 22:52 ` Linus Torvalds
2012-10-20 9:26 ` Heinz Diehl
2012-10-20 9:40 ` Martin Peres
2012-10-20 10:42 ` Heinz Diehl
2012-10-20 20:28 ` Marcin Slusarz
2012-10-20 20:35 ` Marcin Slusarz
2012-10-20 21:20 ` Heinz Diehl
2012-10-20 21:42 ` Marcin Slusarz
2012-10-20 21:45 ` Marcin Slusarz
2012-10-21 8:54 ` Heinz Diehl
2012-10-20 22:19 ` Marcin Slusarz
2012-10-21 6:58 ` Paweł Sikora
2012-10-21 9:26 ` Heinz Diehl
2012-10-21 12:09 ` Marcin Slusarz
2012-10-21 13:31 ` Heinz Diehl
2012-10-21 14:38 ` Linus Torvalds
2012-10-21 14:49 ` Marcin Slusarz
2012-10-21 17:13 ` Linus Torvalds
2012-10-21 20:07 ` Lekensteyn
2012-10-22 0:07 ` Ben Skeggs
2012-10-25 17:53 ` Paweł Sikora
2012-10-25 18:06 ` Heinz Diehl
2012-10-26 19:51 ` Paweł Sikora
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).