From: Jacob Shin <jacob.shin@amd.com>
To: Ben Hutchings <ben@decadent.org.uk>
Cc: Mark Lord <kernel@teksavvy.com>, Yinghai Lu <yinghai@kernel.org>,
Willy Tarreau <w@1wt.eu>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
<stable@vger.kernel.org>,
Linus Torvalds <torvalds@linux-foundation.org>,
Linux Kernel <linux-kernel@vger.kernel.org>,
"H. Peter Anvin" <hpa@linux.intel.com>
Subject: Re: Regression from 3.4.9 to 3.4.16 "stable" kernel
Date: Mon, 29 Oct 2012 09:47:22 -0500 [thread overview]
Message-ID: <20121029144722.GA23217@jshin-Toonie> (raw)
In-Reply-To: <1351521658.13356.7.camel@deadeye.wl.decadent.org.uk>
On Mon, Oct 29, 2012 at 02:40:58PM +0000, Ben Hutchings wrote:
> On Mon, 2012-10-29 at 10:22 -0400, Mark Lord wrote:
> > On 12-10-29 02:46 AM, Willy Tarreau wrote:
> > > On Mon, Oct 29, 2012 at 12:03:55AM -0400, Mark Lord wrote:
> > >> My server here runs the 3.4.xx series of "stable" kernels.
> > >> Until today, it was running 3.4.9.
> > >> Today I tried to upgrade it to 3.4.16.
> > >> It hangs in setup.c.
> > >>
> > >> I've isolated the fault down to this specific change
> > >> that was made between 3.4.9 and 3.4.16.
> > >> Reverting this change allows the system to boot/run normally again.
> > >>
> > >>
> > >> --- linux-3.4.9/arch/x86/kernel/setup.c 2012-08-15 11:17:17.000000000 -0400
> > >> +++ linux-3.4.16/arch/x86/kernel/setup.c 2012-10-28 13:36:33.000000000 -0400
> > >> @@ -927,8 +927,21 @@
> > >>
> > >> #ifdef CONFIG_X86_64
> > >> if (max_pfn > max_low_pfn) {
> > >> - max_pfn_mapped = init_memory_mapping(1UL<<32,
> > >> - max_pfn<<PAGE_SHIFT);
> > >> + int i;
> > >> + for (i = 0; i < e820.nr_map; i++) {
> > >> + struct e820entry *ei = &e820.map[i];
> > >> +
> > >> + if (ei->addr + ei->size <= 1UL << 32)
> > >> + continue;
> > >> +
> > >> + if (ei->type == E820_RESERVED)
> > >> + continue;
> > >> +
> > >> + max_pfn_mapped = init_memory_mapping(
> > >> + ei->addr < 1UL << 32 ? 1UL << 32 : ei->addr,
> > >> + ei->addr + ei->size);
> > >> + }
> > >> +
> > >> /* can we preseve max_low_pfn ?*/
> > >> max_low_pfn = max_pfn;
> > >> }
> > >
> > > For the record, it is this commit introduced in 3.4.16 :
> > >
> > > commit efd5fa0c1a1d1b46846ea6e8d1a783d0d8a6a721
> > > Author: Jacob Shin <jacob.shin@amd.com>
> > > Date: Thu Oct 20 16:15:26 2011 -0500
> > >
> > > x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping.
> > >
> > > commit 1bbbbe779aabe1f0768c2bf8f8c0a5583679b54a upstream.
> > >
> > > On systems with very large memory (1 TB in our case), BIOS may report a
> > > reserved region or a hole in the E820 map, even above the 4 GB range. Exclude
> > > these from the direct mapping.
> > >
> > > [ hpa: this should be done not just for > 4 GB but for everything above the legacy
> > > region (1 MB), at the very least. That, however, turns out to require significant
> > > restructuring. That work is well underway, but is not suitable for rc/stable. ]
> > >
> > > Signed-off-by: Jacob Shin <jacob.shin@amd.com>
> > > Link: http://lkml.kernel.org/r/1319145326-13902-1-git-send-email-jacob.shin@amd.com
> > > Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
> > > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> > >
> > > Willy
> >
> >
> > Thanks, Willy.
> >
> > I've also now downloaded linux-3.7.0-rc3, and it boots/runs without need for patching.
> > So there's a fix somewhere in between that perhaps could also get backported to -stable.
>
> Might well be:
>
> commit 1f2ff682ac951ed82cc043cf140d2851084512df
> Author: Yinghai Lu <yinghai@kernel.org>
> Date: Mon Oct 22 16:35:18 2012 -0700
>
> x86, mm: Use memblock memory loop instead of e820_RAM
>
> However I'm not sure that this loop is correct either. Yinghai, does
> your version definitely iterate in increasing pfn order? If not then
> the max_pfn_mapped assignment must be conditional.
Hi, I believe these two commits in mainline should fix Alexander's failing
machien:
844ab6f993b1d32eb40512503d35ff6ad0c57030
f82f64dd9f485e13f29f369772d4a0e868e5633a
This thread has some more details:
https://lkml.org/lkml/2012/10/21/157
Sorry, and thanks!
>
> Ben.
>
> --
> Ben Hutchings
> Humans are not rational beings; they are rationalising beings.
next prev parent reply other threads:[~2012-10-29 14:47 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-29 4:03 Regression from 3.4.9 to 3.4.16 "stable" kernel Mark Lord
2012-10-29 6:46 ` Willy Tarreau
2012-10-29 14:22 ` Mark Lord
2012-10-29 14:37 ` Mark Lord
2012-10-29 14:40 ` Ben Hutchings
2012-10-29 14:47 ` Jacob Shin [this message]
2012-10-29 16:58 ` Greg Kroah-Hartman
2012-10-29 17:04 ` Jacob Shin
2012-10-29 23:00 ` Mark Lord
2012-10-29 23:03 ` Greg Kroah-Hartman
2012-10-30 1:20 ` Yinghai Lu
2012-10-30 4:53 ` Mark Lord
2012-10-30 16:30 ` Greg Kroah-Hartman
2012-10-29 16:37 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121029144722.GA23217@jshin-Toonie \
--to=jacob.shin@amd.com \
--cc=ben@decadent.org.uk \
--cc=gregkh@linuxfoundation.org \
--cc=hpa@linux.intel.com \
--cc=kernel@teksavvy.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
--cc=w@1wt.eu \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox