linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	alan@lxorguk.ukuu.org.uk, Hemant Kumar <hemantk@codeaurora.org>,
	Oliver Neukum <oneukum@suse.de>,
	"David S. Miller" <davem@davemloft.net>
Subject: [ 49/66] net: usb: Fix memory leak on Tx data path
Date: Wed, 14 Nov 2012 20:10:54 -0800	[thread overview]
Message-ID: <20121115040942.675835689@linuxfoundation.org> (raw)
In-Reply-To: <20121115040939.016421011@linuxfoundation.org>

3.6-stable review patch.  If anyone has any objections, please let me know.

------------------


From: Hemant Kumar <hemantk@codeaurora.org>

[ Upstream commit 39707c2a3ba5011038b363f84d37c8a98d2d9db1 ]

Driver anchors the tx urbs and defers the urb submission if
a transmit request comes when the interface is suspended.
Anchoring urb increments the urb reference count. These
deferred urbs are later accessed by calling usb_get_from_anchor()
for submission during interface resume. usb_get_from_anchor()
unanchors the urb but urb reference count remains same.
This causes the urb reference count to remain non-zero
after usb_free_urb() gets called and urb never gets freed.
Hence call usb_put_urb() after anchoring the urb to properly
balance the reference count for these deferred urbs. Also,
unanchor these deferred urbs during disconnect, to free them
up.

Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/usb/usbnet.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1158,6 +1158,7 @@ netdev_tx_t usbnet_start_xmit (struct sk
 		usb_anchor_urb(urb, &dev->deferred);
 		/* no use to process more packets */
 		netif_stop_queue(net);
+		usb_put_urb(urb);
 		spin_unlock_irqrestore(&dev->txq.lock, flags);
 		netdev_dbg(dev->net, "Delaying transmission for resumption\n");
 		goto deferred;
@@ -1310,6 +1311,8 @@ void usbnet_disconnect (struct usb_inter
 
 	cancel_work_sync(&dev->kevent);
 
+	usb_scuttle_anchored_urbs(&dev->deferred);
+
 	if (dev->driver_info->unbind)
 		dev->driver_info->unbind (dev, intf);
 



  parent reply	other threads:[~2012-11-15  4:32 UTC|newest]

Thread overview: 76+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-15  4:10 [ 00/66] 3.6.7-stable review Greg Kroah-Hartman
2012-11-15  4:10 ` [ 01/66] xen/gntdev: dont leak memory from IOCTL_GNTDEV_MAP_GRANT_REF Greg Kroah-Hartman
2012-11-15  4:10 ` [ 02/66] xen/mmu: Use Xen specific TLB flush instead of the generic one Greg Kroah-Hartman
2012-11-15  4:10 ` [ 03/66] ixgbe: PTP get_ts_info missing software support Greg Kroah-Hartman
2012-11-15  4:10 ` [ 04/66] Input: tsc40 - remove wrong announcement of pressure support Greg Kroah-Hartman
2012-11-15  4:10 ` [ 05/66] ath9k: fix stale pointers potentially causing access to freed skbs Greg Kroah-Hartman
2012-11-15  4:10 ` [ 06/66] ath9k: Test for TID only in BlockAcks while checking tx status Greg Kroah-Hartman
2012-11-15  4:10 ` [ 07/66] rt2800: validate step value for temperature compensation Greg Kroah-Hartman
2012-11-15  4:10 ` [ 08/66] target: Dont return success from module_init() if setup fails Greg Kroah-Hartman
2012-11-15  4:10 ` [ 09/66] target: Avoid integer overflow in se_dev_align_max_sectors() Greg Kroah-Hartman
2012-11-15  4:10 ` [ 10/66] iscsi-target: Fix missed wakeup race in TX thread Greg Kroah-Hartman
2012-11-15  4:10 ` [ 11/66] target: Fix incorrect usage of nested IRQ spinlocks in ABORT_TASK path Greg Kroah-Hartman
2012-11-15  4:10 ` [ 12/66] target: Re-add explict zeroing of INQUIRY bounce buffer memory Greg Kroah-Hartman
2012-11-15  4:10 ` [ 13/66] cfg80211: fix antenna gain handling Greg Kroah-Hartman
2012-11-15  4:10 ` [ 14/66] wireless: drop invalid mesh address extension frames Greg Kroah-Hartman
2012-11-15  4:10 ` [ 15/66] mac80211: use blacklist for duplicate IE check Greg Kroah-Hartman
2012-11-15  4:10 ` [ 16/66] mac80211: Only process mesh config header on frames that RA_MATCH Greg Kroah-Hartman
2012-11-15  4:10 ` [ 17/66] mac80211: dont inspect Sequence Control field on control frames Greg Kroah-Hartman
2012-11-15  4:10 ` [ 18/66] DRM/Radeon: Fix Load Detection on legacy primary DAC Greg Kroah-Hartman
2012-11-15  4:10 ` [ 19/66] drm/udl: fix stride issues scanning out stride != width*bpp Greg Kroah-Hartman
2012-11-15  4:10 ` [ 20/66] drm/i915: clear the entire sdvo infoframe buffer Greg Kroah-Hartman
2012-11-15  4:10 ` [ 21/66] drm/i915: fix overlay on i830M Greg Kroah-Hartman
2012-11-16 16:14   ` Ben Hutchings
2012-11-21  1:25     ` Greg Kroah-Hartman
2012-11-15  4:10 ` [ 22/66] drm/i915: Only kick out vesafb if we takeover the fbcon with KMS Greg Kroah-Hartman
2012-11-15  4:10 ` [ 23/66] mac80211: check management frame header length Greg Kroah-Hartman
2012-11-15  4:10 ` [ 24/66] mac80211: verify that skb data is present Greg Kroah-Hartman
2012-11-15  4:10 ` [ 25/66] mac80211: make sure data is accessible in EAPOL check Greg Kroah-Hartman
2012-11-15  4:10 ` [ 26/66] mac80211: fix SSID copy on IBSS JOIN Greg Kroah-Hartman
2012-11-15  4:10 ` [ 27/66] nfsv3: Make v3 mounts fail with ETIMEDOUTs instead EIO on mountd timeouts Greg Kroah-Hartman
2012-11-15  4:10 ` [ 28/66] nfs: Show original device name verbatim in /proc/*/mount{s,info} Greg Kroah-Hartman
2012-11-15  4:10 ` [ 29/66] NFSv4: nfs4_locku_done must release the sequence id Greg Kroah-Hartman
2012-11-15  4:10 ` [ 30/66] NFSv4.1: We must release the sequence id when we fail to get a session slot Greg Kroah-Hartman
2012-11-15  4:10 ` [ 31/66] NFS: Wait for session recovery to finish before returning Greg Kroah-Hartman
2012-11-16 16:17   ` Ben Hutchings
2012-11-21  1:26     ` Greg Kroah-Hartman
2012-11-15  4:10 ` [ 32/66] NFS: fix bug in legacy DNS resolver Greg Kroah-Hartman
2012-11-15  4:10 ` [ 33/66] batman-adv: Fix broadcast packet CRC calculation Greg Kroah-Hartman
2012-11-15  4:10 ` [ 34/66] drm: restore open_count if drm_setup fails Greg Kroah-Hartman
2012-11-15  4:10 ` [ 35/66] drm: set dev_mapping before calling drm_open_helper Greg Kroah-Hartman
2012-11-15  4:10 ` [ 36/66] hwmon: (w83627ehf) Force initial bank selection Greg Kroah-Hartman
2012-11-15  4:10 ` [ 37/66] ALSA: PCM: Fix some races at disconnection Greg Kroah-Hartman
2012-11-15  4:10 ` [ 38/66] ALSA: usb-audio: Fix " Greg Kroah-Hartman
2012-11-15  4:10 ` [ 39/66] ALSA: usb-audio: Use rwsem for disconnect protection Greg Kroah-Hartman
2012-11-15  4:10 ` [ 40/66] ALSA: usb-audio: Fix races at disconnection in mixer_quirks.c Greg Kroah-Hartman
2012-11-15  4:10 ` [ 41/66] ALSA: Add a reference counter to card instance Greg Kroah-Hartman
2012-11-15  4:10 ` [ 42/66] ALSA: Avoid endless sleep after disconnect Greg Kroah-Hartman
2012-11-15  7:25   ` Takashi Iwai
2012-11-15 22:49     ` Greg Kroah-Hartman
2012-11-15  4:10 ` [ 43/66] sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter() Greg Kroah-Hartman
2012-11-15  4:10 ` [ 44/66] ipv4: Fix flushing of cached routing informations Greg Kroah-Hartman
2012-11-15  4:10 ` [ 45/66] netlink: use kfree_rcu() in netlink_release() Greg Kroah-Hartman
2012-11-15  4:10 ` [ 46/66] tcp: fix FIONREAD/SIOCINQ Greg Kroah-Hartman
2012-11-15  4:10 ` [ 47/66] net: fix secpath kmemleak Greg Kroah-Hartman
2012-11-15  4:10 ` [ 48/66] ipv6: Set default hoplimit as zero Greg Kroah-Hartman
2012-11-15  4:10 ` Greg Kroah-Hartman [this message]
2012-11-15  4:10 ` [ 50/66] net: fix divide by zero in tcp algorithm illinois Greg Kroah-Hartman
2012-11-15  4:10 ` [ 51/66] drivers/net/ethernet/nxp/lpc_eth.c: Call mdiobus_unregister before mdiobus_free Greg Kroah-Hartman
2012-11-15  4:10 ` [ 52/66] l2tp: fix oops in l2tp_eth_create() error path Greg Kroah-Hartman
2012-11-15  4:10 ` [ 53/66] tcp-repair: Handle zero-length data put in rcv queue Greg Kroah-Hartman
2012-11-15  4:10 ` [ 54/66] net: inet_diag -- Return error code if protocol handler is missed Greg Kroah-Hartman
2012-11-15  4:11 ` [ 55/66] af-packet: fix oops when socket is not present Greg Kroah-Hartman
2012-11-15  4:11 ` [ 56/66] ipv6: send unsolicited neighbour advertisements to all-nodes Greg Kroah-Hartman
2012-11-15  4:11 ` [ 57/66] futex: Handle futex_pi OWNER_DIED take over correctly Greg Kroah-Hartman
2012-11-15  4:11 ` [ 58/66] mmc: sh_mmcif: fix use after free Greg Kroah-Hartman
2012-11-15  4:11 ` [ 59/66] mmc: sdhci: fix NULL dereference in sdhci_request() tuning Greg Kroah-Hartman
2012-11-15  4:11 ` [ 60/66] drm/vmwgfx: Fix hibernation device reset Greg Kroah-Hartman
2012-11-15  4:11 ` [ 61/66] drm/vmwgfx: Fix a case where the code would BUG when trying to pin GMR memory Greg Kroah-Hartman
2012-11-15  4:11 ` [ 62/66] drm/radeon/cayman: add some missing regs to the VM reg checker Greg Kroah-Hartman
2012-11-15  4:11 ` [ 63/66] drm/radeon/si: " Greg Kroah-Hartman
2012-11-15  4:11 ` [ 64/66] GFS2: Test bufdata with buffer locked and gfs2_log_lock held Greg Kroah-Hartman
2012-11-25 13:11   ` Ben Hutchings
2012-11-26 15:13     ` Steven Whitehouse
2012-12-02  3:52       ` Ben Hutchings
2012-11-15  4:11 ` [ 65/66] xfs: fix reading of wrapped log data Greg Kroah-Hartman
2012-11-15  4:11 ` [ 66/66] xfs: fix buffer shudown reference count mismatch Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121115040942.675835689@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=davem@davemloft.net \
    --cc=hemantk@codeaurora.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=oneukum@suse.de \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).