From: Alan Cox <alan@linux.intel.com>
To: arve@android.com, x86@kernel.org, linux-kernel@vger.kernel.org,
mikechan@google.com
Subject: [RFC PATCH 0/9] Upstream merge of core of Goldfish AVD support
Date: Mon, 03 Dec 2012 15:04:04 +0000 [thread overview]
Message-ID: <20121203150310.16826.3363.stgit@bob.linux.org.uk> (raw)
This is a port and clean up of the core platform and driver code for
the Goldfish AVD (Android Virtual Device).
With these patches applied you can boot Debian on Goldfish for minimal testing
purposes. It won't boot Android as there are other drivers needed, some of
which still need out of tree Android code.
Goldfish is both an ARM and an x86 platform. These patches add the x86 code
but they also add all the cleanups done to make most of the code portable. All
the drivers therefore are put into drivers/platform/goldfish or into the
relevant driver directories so they can be shared by other processors as
needed in future.
Once these drivers are in an upstream acceptable shape I'll look at feeding
the other bits in.
Alan
---
Arve Hjønnevåg (4):
goldfish: tty driver
goldfish: framebuffer
goldfish: real time clock
goldfish: NAND flash driver
Brian Swetland (1):
goldfish: virtual input event driver
Jun Nakajima (2):
goldfish: definitions for Goldfish on x86 platforms
goldfish: add the goldfish virtual bus
Mike Lockwood (2):
goldfish: emulated MMC device
goldfish: power device
arch/x86/Kconfig | 12 +
arch/x86/include/asm/goldfish.h | 43 ++
drivers/input/keyboard/Kconfig | 11 +
drivers/input/keyboard/Makefile | 1
drivers/input/keyboard/goldfish_events.c | 201 ++++++++++
drivers/mmc/host/Kconfig | 7
drivers/mmc/host/Makefile | 1
drivers/mmc/host/goldfish.c | 579 ++++++++++++++++++++++++++++++
drivers/mtd/devices/Kconfig | 7
drivers/mtd/devices/Makefile | 3
drivers/mtd/devices/goldfish_nand.c | 475 +++++++++++++++++++++++++
drivers/mtd/devices/goldfish_nand_reg.h | 72 ++++
drivers/platform/Makefile | 1
drivers/platform/goldfish/Makefile | 4
drivers/platform/goldfish/pdev_bus.c | 267 ++++++++++++++
drivers/power/Kconfig | 8
drivers/power/Makefile | 1
drivers/power/goldfish_battery.c | 263 ++++++++++++++
drivers/rtc/Kconfig | 9
drivers/rtc/Makefile | 1
drivers/rtc/rtc-goldfish.c | 146 ++++++++
drivers/tty/Kconfig | 6
drivers/tty/Makefile | 1
drivers/tty/goldfish.c | 342 ++++++++++++++++++
drivers/video/Kconfig | 9
drivers/video/Makefile | 1
drivers/video/goldfishfb.c | 327 +++++++++++++++++
27 files changed, 2796 insertions(+), 2 deletions(-)
create mode 100644 arch/x86/include/asm/goldfish.h
create mode 100644 drivers/input/keyboard/goldfish_events.c
create mode 100644 drivers/mmc/host/goldfish.c
create mode 100644 drivers/mtd/devices/goldfish_nand.c
create mode 100644 drivers/mtd/devices/goldfish_nand_reg.h
create mode 100644 drivers/platform/goldfish/Makefile
create mode 100644 drivers/platform/goldfish/pdev_bus.c
create mode 100644 drivers/power/goldfish_battery.c
create mode 100644 drivers/rtc/rtc-goldfish.c
create mode 100644 drivers/tty/goldfish.c
create mode 100644 drivers/video/goldfishfb.c
--
Moo!
next reply other threads:[~2012-12-03 15:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-03 15:04 Alan Cox [this message]
2012-12-03 15:04 ` [PATCH 1/9] goldfish: definitions for Goldfish on x86 platforms Alan Cox
2012-12-04 10:07 ` Geert Uytterhoeven
2012-12-03 15:04 ` [PATCH 2/9] goldfish: add the goldfish virtual bus Alan Cox
2012-12-03 15:04 ` [PATCH 3/9] goldfish: tty driver Alan Cox
2012-12-03 15:05 ` [PATCH 4/9] goldfish: virtual input event driver Alan Cox
2012-12-03 15:05 ` [PATCH 5/9] goldfish: framebuffer Alan Cox
2012-12-03 15:05 ` [PATCH 6/9] goldfish: emulated MMC device Alan Cox
2012-12-03 15:05 ` [PATCH 7/9] goldfish: power device Alan Cox
2012-12-03 15:06 ` [PATCH 8/9] goldfish: real time clock Alan Cox
2012-12-03 15:06 ` [PATCH 9/9] goldfish: NAND flash driver Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121203150310.16826.3363.stgit@bob.linux.org.uk \
--to=alan@linux.intel.com \
--cc=arve@android.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mikechan@google.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox