From: Alan Cox <alan@linux.intel.com>
To: arve@android.com, x86@kernel.org, linux-kernel@vger.kernel.org,
mikechan@google.com
Subject: [PATCH 4/9] goldfish: virtual input event driver
Date: Mon, 03 Dec 2012 15:05:12 +0000 [thread overview]
Message-ID: <20121203150507.16826.17845.stgit@bob.linux.org.uk> (raw)
In-Reply-To: <20121203150310.16826.3363.stgit@bob.linux.org.uk>
From: Brian Swetland <swetland@google.com>
This device is a direct pipe from "hardware" to the input
event subsystem, allowing us to avoid having to route
"keypad" style events through an AT keyboard driver (gross!)
As with the other submissions this driver is cross architecture.
Signed-off-by: Mike A. Chan <mikechan@google.com>
[Tided up to work on x86]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Xiaohui Xin <xiaohui.xin@intel.com>
Signed-off-by: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Bruce Beare <bruce.j.beare@intel.com>
[Ported to 3.4]
Signed-off-by: Tom Keel <thomas.keel@intel.com>
[Cleaned up for 3.7 and submission]
Signed-off-by: Alan Cox <alan@linux.intel.com>
---
drivers/input/keyboard/Kconfig | 11 ++
drivers/input/keyboard/Makefile | 1
drivers/input/keyboard/goldfish_events.c | 201 ++++++++++++++++++++++++++++++
3 files changed, 213 insertions(+)
create mode 100644 drivers/input/keyboard/goldfish_events.c
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 7ccd652..e6eba4e 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -479,6 +479,17 @@ config KEYBOARD_SAMSUNG
To compile this driver as a module, choose M here: the
module will be called samsung-keypad.
+config KEYBOARD_GOLDFISH_EVENTS
+ depends on GOLDFISH
+ tristate "Generic Input Event device for Goldfish"
+ help
+ Say Y here to get an input event device for the Goldfish virtual
+ device emulator.
+
+ To compile this driver as a module, choose M here: the
+ module will be called goldfish-events.
+
+
config KEYBOARD_STOWAWAY
tristate "Stowaway keyboard"
select SERIO
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index 44e7600..49b1645 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o
obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
+obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o
obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
diff --git a/drivers/input/keyboard/goldfish_events.c b/drivers/input/keyboard/goldfish_events.c
new file mode 100644
index 0000000..bf596b0
--- /dev/null
+++ b/drivers/input/keyboard/goldfish_events.c
@@ -0,0 +1,201 @@
+/*
+ * drivers/input/keyboard/goldfish-events.c
+ *
+ * Copyright (C) 2007 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+enum {
+ REG_READ = 0x00,
+ REG_SET_PAGE = 0x00,
+ REG_LEN = 0x04,
+ REG_DATA = 0x08,
+
+ PAGE_NAME = 0x00000,
+ PAGE_EVBITS = 0x10000,
+ PAGE_ABSDATA = 0x20000 | EV_ABS,
+};
+
+struct event_dev {
+ struct input_dev *input;
+ int irq;
+ void __iomem *addr;
+ char name[0];
+};
+
+static irqreturn_t events_interrupt(int irq, void *dev_id)
+{
+ struct event_dev *edev = dev_id;
+ unsigned type, code, value;
+
+ type = __raw_readl(edev->addr + REG_READ);
+ code = __raw_readl(edev->addr + REG_READ);
+ value = __raw_readl(edev->addr + REG_READ);
+
+ input_event(edev->input, type, code, value);
+ if (type == EV_KEY)
+ input_sync(edev->input);
+ return IRQ_HANDLED;
+}
+
+static void events_import_bits(struct event_dev *edev,
+ unsigned long bits[], unsigned type, size_t count)
+{
+ int i, j;
+ size_t size;
+ uint8_t val;
+ void __iomem *addr = edev->addr;
+ __raw_writel(PAGE_EVBITS | type, addr + REG_SET_PAGE);
+ size = __raw_readl(addr + REG_LEN) * 8;
+ if (size < count)
+ count = size;
+ addr = addr + REG_DATA;
+ for (i = 0; i < count; i += 8) {
+ val = __raw_readb(addr++);
+ for (j = 0; j < 8; j++)
+ if (val & 1 << j)
+ set_bit(i + j, bits);
+ }
+}
+
+static int events_probe(struct platform_device *pdev)
+{
+ struct input_dev *input_dev;
+ struct event_dev *edev = NULL;
+ struct resource *res;
+ unsigned keymapnamelen;
+ int i;
+ int count;
+ int irq;
+ void __iomem *addr;
+ int ret;
+
+ pr_debug("*** events probe ***\n");
+
+ input_dev = input_allocate_device();
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!input_dev || !res)
+ goto fail;
+
+ addr = ioremap(res->start, 4096);
+ irq = platform_get_irq(pdev, 0);
+
+ pr_debug("events_probe() addr=%p irq=%d\n", addr, irq);
+
+ if (!addr)
+ goto fail;
+ if (irq < 0)
+ goto fail;
+
+ __raw_writel(PAGE_NAME, addr + REG_SET_PAGE);
+ keymapnamelen = __raw_readl(addr + REG_LEN);
+
+ edev = kzalloc(sizeof(struct event_dev) + keymapnamelen + 1,
+ GFP_KERNEL);
+ if (!edev)
+ goto fail;
+
+ edev->input = input_dev;
+ edev->addr = addr;
+ edev->irq = irq;
+
+ for (i = 0; i < keymapnamelen; i++)
+ edev->name[i] = __raw_readb(edev->addr + REG_DATA + i);
+
+ pr_debug("events_probe() keymap=%s\n", edev->name);
+
+ events_import_bits(edev, input_dev->evbit, EV_SYN, EV_MAX);
+ events_import_bits(edev, input_dev->keybit, EV_KEY, KEY_MAX);
+ events_import_bits(edev, input_dev->relbit, EV_REL, REL_MAX);
+ events_import_bits(edev, input_dev->absbit, EV_ABS, ABS_MAX);
+ events_import_bits(edev, input_dev->mscbit, EV_MSC, MSC_MAX);
+ events_import_bits(edev, input_dev->ledbit, EV_LED, LED_MAX);
+ events_import_bits(edev, input_dev->sndbit, EV_SND, SND_MAX);
+ events_import_bits(edev, input_dev->ffbit, EV_FF, FF_MAX);
+ events_import_bits(edev, input_dev->swbit, EV_SW, SW_MAX);
+
+ __raw_writel(PAGE_ABSDATA, addr + REG_SET_PAGE);
+ count = __raw_readl(addr + REG_LEN) / (4 * 4);
+ if (count > ABS_MAX)
+ count = ABS_MAX;
+ for (i = 0; i < count; i++) {
+ int val[4];
+ int j;
+ if (!test_bit(i, input_dev->absbit))
+ continue;
+ for (j = 0; j < ARRAY_SIZE(val); j++)
+ val[j] = __raw_readl(edev->addr + REG_DATA + (i * ARRAY_SIZE(val) + j) * 4);
+ input_set_abs_params(input_dev, i, val[0], val[1],
+ val[2], val[3]);
+ }
+
+ platform_set_drvdata(pdev, edev);
+
+ input_dev->name = edev->name;
+ input_set_drvdata(input_dev, edev);
+
+ ret = input_register_device(input_dev);
+ if (ret)
+ goto fail;
+
+ if (request_irq(edev->irq, events_interrupt, 0,
+ "goldfish-events-keypad", edev) < 0) {
+ input_unregister_device(input_dev);
+ kfree(edev);
+ return -EINVAL;
+ }
+
+ return 0;
+
+fail:
+ kfree(edev);
+ input_free_device(input_dev);
+
+ return -EINVAL;
+}
+
+static struct platform_driver events_driver = {
+ .probe = events_probe,
+ .driver = {
+ .name = "goldfish_events",
+ },
+};
+
+static int __devinit events_init(void)
+{
+ return platform_driver_register(&events_driver);
+}
+
+
+static void __exit events_exit(void)
+{
+ return platform_driver_unregister(&events_driver);
+}
+
+module_init(events_init);
+module_exit(events_exit);
+
+MODULE_AUTHOR("Brian Swetland");
+MODULE_DESCRIPTION("Goldfish Event Device");
+MODULE_LICENSE("GPL");
next prev parent reply other threads:[~2012-12-03 15:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-03 15:04 [RFC PATCH 0/9] Upstream merge of core of Goldfish AVD support Alan Cox
2012-12-03 15:04 ` [PATCH 1/9] goldfish: definitions for Goldfish on x86 platforms Alan Cox
2012-12-04 10:07 ` Geert Uytterhoeven
2012-12-03 15:04 ` [PATCH 2/9] goldfish: add the goldfish virtual bus Alan Cox
2012-12-03 15:04 ` [PATCH 3/9] goldfish: tty driver Alan Cox
2012-12-03 15:05 ` Alan Cox [this message]
2012-12-03 15:05 ` [PATCH 5/9] goldfish: framebuffer Alan Cox
2012-12-03 15:05 ` [PATCH 6/9] goldfish: emulated MMC device Alan Cox
2012-12-03 15:05 ` [PATCH 7/9] goldfish: power device Alan Cox
2012-12-03 15:06 ` [PATCH 8/9] goldfish: real time clock Alan Cox
2012-12-03 15:06 ` [PATCH 9/9] goldfish: NAND flash driver Alan Cox
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121203150507.16826.17845.stgit@bob.linux.org.uk \
--to=alan@linux.intel.com \
--cc=arve@android.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mikechan@google.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox