From: Ben Hutchings <ben@decadent.org.uk>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Christian Lamparter <chunkeey@googlemail.com>,
"John W. Linville" <linville@tuxdriver.com>
Subject: [ 13/49] p54usb: add USBIDs for two more p54usb devices
Date: Sun, 13 Jan 2013 17:43:08 +0000 [thread overview]
Message-ID: <20130113174258.536486196@decadent.org.uk> (raw)
In-Reply-To: <20130113174255.736888844@decadent.org.uk>
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Lamparter <chunkeey@googlemail.com>
commit 4010fe21a315b4223c25376714c6a2b61b722e5c upstream.
This patch adds USBIDs for:
- DrayTek Vigor 530
- Zoom 4410a
It also adds a note about Gemtek WUBI-100GW
and SparkLAN WL-682 USBID conflict [WUBI-100GW
is a ISL3886+NET2280 (LM86 firmare) solution,
whereas WL-682 is a ISL3887 (LM87 firmware)]
device.
Source: <http://www.wikidevi.com/wiki/Intersil/p54/usb/windows>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/net/wireless/p54/p54usb.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 64b944b..800a165 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -47,6 +47,7 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x0411, 0x0050)}, /* Buffalo WLI2-USB2-G54 */
{USB_DEVICE(0x045e, 0x00c2)}, /* Microsoft MN-710 */
{USB_DEVICE(0x0506, 0x0a11)}, /* 3COM 3CRWE254G72 */
+ {USB_DEVICE(0x0675, 0x0530)}, /* DrayTek Vigor 530 */
{USB_DEVICE(0x06b9, 0x0120)}, /* Thomson SpeedTouch 120g */
{USB_DEVICE(0x0707, 0xee06)}, /* SMC 2862W-G */
{USB_DEVICE(0x07aa, 0x001c)}, /* Corega CG-WLUSB2GT */
@@ -82,6 +83,7 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x06a9, 0x000e)}, /* Westell 802.11g USB (A90-211WG-01) */
{USB_DEVICE(0x06b9, 0x0121)}, /* Thomson SpeedTouch 121g */
{USB_DEVICE(0x0707, 0xee13)}, /* SMC 2862W-G version 2 */
+ {USB_DEVICE(0x0803, 0x4310)}, /* Zoom 4410a */
{USB_DEVICE(0x083a, 0x4503)}, /* T-Com Sinus 154 data II */
{USB_DEVICE(0x083a, 0x4521)}, /* Siemens Gigaset USB Adapter 54 version 2 */
{USB_DEVICE(0x083a, 0xc501)}, /* Zoom Wireless-G 4410 */
@@ -102,6 +104,7 @@ static struct usb_device_id p54u_table[] = {
{USB_DEVICE(0x13B1, 0x000C)}, /* Linksys WUSB54AG */
{USB_DEVICE(0x1413, 0x5400)}, /* Telsey 802.11g USB2.0 Adapter */
{USB_DEVICE(0x1435, 0x0427)}, /* Inventel UR054G */
+ /* {USB_DEVICE(0x15a9, 0x0002)}, * Also SparkLAN WL-682 with 3887 */
{USB_DEVICE(0x1668, 0x1050)}, /* Actiontec 802UIG-1 */
{USB_DEVICE(0x1740, 0x1000)}, /* Senao NUB-350 */
{USB_DEVICE(0x2001, 0x3704)}, /* DLink DWL-G122 rev A2 */
next prev parent reply other threads:[~2013-01-13 17:57 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-13 17:42 [ 00/49] 3.2.37-stable review Ben Hutchings
2013-01-13 17:42 ` [ 01/49] ext4: fix extent tree corruption caused by hole punch Ben Hutchings
2013-01-13 17:42 ` [ 02/49] i915: ensure that VGA plane is disabled Ben Hutchings
2013-01-13 17:42 ` [ 03/49] ext4: check dioread_nolock on remount Ben Hutchings
2013-01-13 17:42 ` [ 04/49] jbd2: fix assertion failure in jbd2_journal_flush() Ben Hutchings
2013-01-13 17:43 ` [ 05/49] hwmon: (lm73} Detect and report i2c bus errors Ben Hutchings
2013-01-13 17:43 ` [ 06/49] ext4: do not try to write superblock on ro remount w/o journal Ben Hutchings
2013-01-13 17:43 ` [ 07/49] PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz Ben Hutchings
2013-01-13 17:43 ` [ 08/49] mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDED Ben Hutchings
2013-01-13 17:43 ` [ 09/49] cifs: adjust sequence number downward after signing NT_CANCEL request Ben Hutchings
2013-01-13 17:43 ` [ 10/49] tmpfs mempolicy: fix /proc/mounts corrupting memory Ben Hutchings
2013-01-13 17:43 ` [ 11/49] p54usb: add USB ID for T-Com Sinus 154 data II Ben Hutchings
2013-01-13 17:43 ` [ 12/49] ath9k_hw: Fix RX gain initvals for AR9485 Ben Hutchings
2013-01-13 17:43 ` Ben Hutchings [this message]
2013-01-13 17:43 ` [ 14/49] powerpc/vdso: Remove redundant locking in update_vsyscall_tz() Ben Hutchings
2013-01-13 17:43 ` [ 15/49] powerpc: Add missing NULL terminator to avoid boot panic on PPC40x Ben Hutchings
2013-01-13 17:43 ` [ 16/49] drm/radeon: add connector table for SAM440ep embedded board Ben Hutchings
2013-01-13 17:43 ` [ 17/49] drm/radeon: add connector table for Mac G4 Silver Ben Hutchings
2013-01-14 18:48 ` Albrecht Dreß
2013-01-13 17:43 ` [ 18/49] drm/radeon: Properly handle DDC probe for DP bridges Ben Hutchings
2013-01-13 17:43 ` [ 19/49] NFSv4: Add ACCESS operation to OPEN compound Ben Hutchings
2013-01-15 18:42 ` Herton Ronaldo Krzesinski
2013-01-16 1:08 ` Ben Hutchings
2013-01-13 17:43 ` [ 20/49] NFSv4: dont check MAY_WRITE access bit in OPEN Ben Hutchings
2013-01-13 17:43 ` [ 21/49] NFS4: nfs4_opendata_access should return errno Ben Hutchings
2013-01-13 17:43 ` [ 22/49] NFS: Fix access to suid/sgid executables Ben Hutchings
2013-01-13 17:43 ` [ 23/49] drm/nouveau: fix init with agpgart-uninorth Ben Hutchings
2013-01-13 17:43 ` [ 24/49] video: mxsfb: fix crash when unblanking the display Ben Hutchings
2013-01-13 17:43 ` [ 25/49] nfs: fix null checking in nfs_get_option_str() Ben Hutchings
2013-01-13 17:43 ` [ 26/49] SUNRPC: Ensure that we free the rpc_task after cleanups are done Ben Hutchings
2013-01-13 17:43 ` [ 27/49] ACPI / scan: Do not use dummy HID for system bus ACPI nodes Ben Hutchings
2013-01-13 17:43 ` [ 28/49] mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT Ben Hutchings
2013-01-13 17:43 ` [ 29/49] drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfield Ben Hutchings
2013-01-13 17:43 ` [ 30/49] drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_time Ben Hutchings
2013-01-13 17:43 ` [ 31/49] udf: dont increment lenExtents while writing to a hole Ben Hutchings
2013-01-13 17:43 ` [ 32/49] epoll: prevent missed events on EPOLL_CTL_MOD Ben Hutchings
2013-01-13 17:43 ` [ 33/49] rt2x00: Dont let mac80211 send a BAR when an AMPDU subframe fails Ben Hutchings
2013-01-13 17:43 ` [ 34/49] mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL Ben Hutchings
2013-01-13 17:43 ` [ 35/49] Revert: "rt2x00: Dont let mac80211 send a BAR when an AMPDU subframe fails" Ben Hutchings
2013-01-13 17:43 ` [ 36/49] ftrace: Do not function trace inlined functions Ben Hutchings
2013-01-13 17:43 ` [ 37/49] sparc: huge_ptep_set_* functions need to call set_huge_pte_at() Ben Hutchings
2013-01-13 17:43 ` [ 38/49] inet: Fix kmemleak in tcp_v4/6_syn_recv_sock and dccp_v4/6_request_recv_sock Ben Hutchings
2013-01-13 17:43 ` [ 39/49] net: sched: integer overflow fix Ben Hutchings
2013-01-13 17:43 ` [ 40/49] tcp: implement RFC 5961 3.2 Ben Hutchings
2013-01-13 17:43 ` [ 41/49] tcp: implement RFC 5961 4.2 Ben Hutchings
2013-01-13 17:43 ` [ 42/49] tcp: refine SYN handling in tcp_validate_incoming Ben Hutchings
2013-01-13 17:43 ` [ 43/49] tcp: tcp_replace_ts_recent() should not be called from tcp_validate_incoming() Ben Hutchings
2013-01-13 17:43 ` [ 44/49] tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation Ben Hutchings
2013-01-13 17:43 ` [ 45/49] [SCSI] mvsas: Fix oops when ata commond timeout Ben Hutchings
2013-01-13 17:43 ` [ 46/49] RDMA/nes: Fix for crash when registering zero length MR for CQ Ben Hutchings
2013-01-13 17:43 ` [ 47/49] RDMA/nes: Fix for terminate timer crash Ben Hutchings
2013-01-13 17:43 ` [ 48/49] ACPI : do not use Lid and Sleep button for S5 wakeup Ben Hutchings
2013-01-13 17:43 ` [ 49/49] aoe: do not call bdi_init after blk_alloc_queue Ben Hutchings
2013-01-13 22:44 ` [ 00/49] 3.2.37-stable review Ben Hutchings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130113174258.536486196@decadent.org.uk \
--to=ben@decadent.org.uk \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=chunkeey@googlemail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox