From: Ben Hutchings <ben@decadent.org.uk>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: akpm@linux-foundation.org, alan@lxorguk.ukuu.org.uk,
Stanislaw Gruszka <sgruszka@redhat.com>,
Johannes Berg <johannes.berg@intel.com>
Subject: [ 34/49] mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL
Date: Sun, 13 Jan 2013 17:43:29 +0000 [thread overview]
Message-ID: <20130113174302.884463477@decadent.org.uk> (raw)
In-Reply-To: <20130113174255.736888844@decadent.org.uk>
3.2-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanislaw Gruszka <sgruszka@redhat.com>
commit 5b632fe85ec82e5c43740b52e74c66df50a37db3 upstream.
Commit f0425beda4d404a6e751439b562100b902ba9c98 "mac80211: retry sending
failed BAR frames later instead of tearing down aggr" caused regression
on rt2x00 hardware (connection hangs). This regression was fixed by
commit be03d4a45c09ee5100d3aaaedd087f19bc20d01 "rt2x00: Don't let
mac80211 send a BAR when an AMPDU subframe fails". But the latter
commit caused yet another problem reported in
https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22
After long discussion in this thread:
http://mid.gmane.org/20121018075615.GA18212@redhat.com
and testing various alternative solutions, which failed on one or other
setup, we have no other good fix for the issues like just revert both
mentioned earlier commits.
To do not affect other hardware which benefit from commit
f0425beda4d404a6e751439b562100b902ba9c98, instead of reverting it,
introduce flag that when used will restore mac80211 behaviour before
the commit.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
[replaced link with mid.gmane.org that has message-id]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
[bwh: Backported to 3.2: adjust context]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
include/net/mac80211.h | 5 +++++
net/mac80211/status.c | 6 +++++-
2 files changed, 10 insertions(+), 1 deletion(-)
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1128,6 +1128,10 @@ enum sta_notify_cmd {
* @IEEE80211_HW_TX_AMPDU_SETUP_IN_HW: The device handles TX A-MPDU session
* setup strictly in HW. mac80211 should not attempt to do this in
* software.
+ *
+ * @IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL: On this hardware TX BA session
+ * should be tear down once BAR frame will not be acked.
+ *
*/
enum ieee80211_hw_flags {
IEEE80211_HW_HAS_RATE_CONTROL = 1<<0,
@@ -1154,6 +1158,7 @@ enum ieee80211_hw_flags {
IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21,
IEEE80211_HW_AP_LINK_PS = 1<<22,
IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23,
+ IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL = 1<<26,
};
/**
--- a/net/mac80211/status.c
+++ b/net/mac80211/status.c
@@ -429,7 +429,11 @@ void ieee80211_tx_status(struct ieee8021
IEEE80211_BAR_CTRL_TID_INFO_MASK) >>
IEEE80211_BAR_CTRL_TID_INFO_SHIFT;
- ieee80211_set_bar_pending(sta, tid, ssn);
+ if (local->hw.flags &
+ IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAIL)
+ ieee80211_stop_tx_ba_session(&sta->sta, tid);
+ else
+ ieee80211_set_bar_pending(sta, tid, ssn);
}
}
next prev parent reply other threads:[~2013-01-13 17:52 UTC|newest]
Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-13 17:42 [ 00/49] 3.2.37-stable review Ben Hutchings
2013-01-13 17:42 ` [ 01/49] ext4: fix extent tree corruption caused by hole punch Ben Hutchings
2013-01-13 17:42 ` [ 02/49] i915: ensure that VGA plane is disabled Ben Hutchings
2013-01-13 17:42 ` [ 03/49] ext4: check dioread_nolock on remount Ben Hutchings
2013-01-13 17:42 ` [ 04/49] jbd2: fix assertion failure in jbd2_journal_flush() Ben Hutchings
2013-01-13 17:43 ` [ 05/49] hwmon: (lm73} Detect and report i2c bus errors Ben Hutchings
2013-01-13 17:43 ` [ 06/49] ext4: do not try to write superblock on ro remount w/o journal Ben Hutchings
2013-01-13 17:43 ` [ 07/49] PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz Ben Hutchings
2013-01-13 17:43 ` [ 08/49] mm: Fix PageHead when !CONFIG_PAGEFLAGS_EXTENDED Ben Hutchings
2013-01-13 17:43 ` [ 09/49] cifs: adjust sequence number downward after signing NT_CANCEL request Ben Hutchings
2013-01-13 17:43 ` [ 10/49] tmpfs mempolicy: fix /proc/mounts corrupting memory Ben Hutchings
2013-01-13 17:43 ` [ 11/49] p54usb: add USB ID for T-Com Sinus 154 data II Ben Hutchings
2013-01-13 17:43 ` [ 12/49] ath9k_hw: Fix RX gain initvals for AR9485 Ben Hutchings
2013-01-13 17:43 ` [ 13/49] p54usb: add USBIDs for two more p54usb devices Ben Hutchings
2013-01-13 17:43 ` [ 14/49] powerpc/vdso: Remove redundant locking in update_vsyscall_tz() Ben Hutchings
2013-01-13 17:43 ` [ 15/49] powerpc: Add missing NULL terminator to avoid boot panic on PPC40x Ben Hutchings
2013-01-13 17:43 ` [ 16/49] drm/radeon: add connector table for SAM440ep embedded board Ben Hutchings
2013-01-13 17:43 ` [ 17/49] drm/radeon: add connector table for Mac G4 Silver Ben Hutchings
2013-01-14 18:48 ` Albrecht Dreß
2013-01-13 17:43 ` [ 18/49] drm/radeon: Properly handle DDC probe for DP bridges Ben Hutchings
2013-01-13 17:43 ` [ 19/49] NFSv4: Add ACCESS operation to OPEN compound Ben Hutchings
2013-01-15 18:42 ` Herton Ronaldo Krzesinski
2013-01-16 1:08 ` Ben Hutchings
2013-01-13 17:43 ` [ 20/49] NFSv4: dont check MAY_WRITE access bit in OPEN Ben Hutchings
2013-01-13 17:43 ` [ 21/49] NFS4: nfs4_opendata_access should return errno Ben Hutchings
2013-01-13 17:43 ` [ 22/49] NFS: Fix access to suid/sgid executables Ben Hutchings
2013-01-13 17:43 ` [ 23/49] drm/nouveau: fix init with agpgart-uninorth Ben Hutchings
2013-01-13 17:43 ` [ 24/49] video: mxsfb: fix crash when unblanking the display Ben Hutchings
2013-01-13 17:43 ` [ 25/49] nfs: fix null checking in nfs_get_option_str() Ben Hutchings
2013-01-13 17:43 ` [ 26/49] SUNRPC: Ensure that we free the rpc_task after cleanups are done Ben Hutchings
2013-01-13 17:43 ` [ 27/49] ACPI / scan: Do not use dummy HID for system bus ACPI nodes Ben Hutchings
2013-01-13 17:43 ` [ 28/49] mm: limit mmu_gather batching to fix soft lockups on !CONFIG_PREEMPT Ben Hutchings
2013-01-13 17:43 ` [ 29/49] drivers/rtc/rtc-vt8500.c: correct handling of CR_24H bitfield Ben Hutchings
2013-01-13 17:43 ` [ 30/49] drivers/rtc/rtc-vt8500.c: fix handling of data passed in struct rtc_time Ben Hutchings
2013-01-13 17:43 ` [ 31/49] udf: dont increment lenExtents while writing to a hole Ben Hutchings
2013-01-13 17:43 ` [ 32/49] epoll: prevent missed events on EPOLL_CTL_MOD Ben Hutchings
2013-01-13 17:43 ` [ 33/49] rt2x00: Dont let mac80211 send a BAR when an AMPDU subframe fails Ben Hutchings
2013-01-13 17:43 ` Ben Hutchings [this message]
2013-01-13 17:43 ` [ 35/49] Revert: "rt2x00: Dont let mac80211 send a BAR when an AMPDU subframe fails" Ben Hutchings
2013-01-13 17:43 ` [ 36/49] ftrace: Do not function trace inlined functions Ben Hutchings
2013-01-13 17:43 ` [ 37/49] sparc: huge_ptep_set_* functions need to call set_huge_pte_at() Ben Hutchings
2013-01-13 17:43 ` [ 38/49] inet: Fix kmemleak in tcp_v4/6_syn_recv_sock and dccp_v4/6_request_recv_sock Ben Hutchings
2013-01-13 17:43 ` [ 39/49] net: sched: integer overflow fix Ben Hutchings
2013-01-13 17:43 ` [ 40/49] tcp: implement RFC 5961 3.2 Ben Hutchings
2013-01-13 17:43 ` [ 41/49] tcp: implement RFC 5961 4.2 Ben Hutchings
2013-01-13 17:43 ` [ 42/49] tcp: refine SYN handling in tcp_validate_incoming Ben Hutchings
2013-01-13 17:43 ` [ 43/49] tcp: tcp_replace_ts_recent() should not be called from tcp_validate_incoming() Ben Hutchings
2013-01-13 17:43 ` [ 44/49] tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation Ben Hutchings
2013-01-13 17:43 ` [ 45/49] [SCSI] mvsas: Fix oops when ata commond timeout Ben Hutchings
2013-01-13 17:43 ` [ 46/49] RDMA/nes: Fix for crash when registering zero length MR for CQ Ben Hutchings
2013-01-13 17:43 ` [ 47/49] RDMA/nes: Fix for terminate timer crash Ben Hutchings
2013-01-13 17:43 ` [ 48/49] ACPI : do not use Lid and Sleep button for S5 wakeup Ben Hutchings
2013-01-13 17:43 ` [ 49/49] aoe: do not call bdi_init after blk_alloc_queue Ben Hutchings
2013-01-13 22:44 ` [ 00/49] 3.2.37-stable review Ben Hutchings
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130113174302.884463477@decadent.org.uk \
--to=ben@decadent.org.uk \
--cc=akpm@linux-foundation.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=johannes.berg@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sgruszka@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox