Re: [PATCH v6 0/4] Adding usb2.0 host-phy support for exynos5250

[Felipe Balbi <balbi@ti.com>]

[-- Attachment #1: Type: text/plain, Size: 2543 bytes --]

HI,

On Mon, Jan 21, 2013 at 09:23:28PM -0800, Kukjin Kim wrote:
> Vivek Gautam wrote:
> > 
> > Changes from v5:
> >  - Rebased on top of latest patches:
> >         usb: phy: samsung: Introducing usb phy driver for hsotg (v9)
> >         usb: phy: samsung: Add support to set pmu isolation (v6)
> >    As a result adding hostphy enable mask and hostphy register offsets
> >    to driver data in order to access the HOSTPHY CONTROL register.
> > 
> >  - Adding member 'otg' to struct samsung-usbphy so that its consumers
> >    can call otg->set_host so as to make 'phy' aware of the consumer type:
> > 	HOST/DEVICE
> > 
> >  - Adding 'otg' to 'struct s5p_ehci_hcd' and 'struct exynos_ohci_hcd'
> >    which keeps track of 'otg' of the controllers' phy. This then sets
> >    the host.
> > 
> >  - Moved samsung_usbphy_set_type() calls from ehci-s5p and ohci-exynos
> >    to phy driver itself where based on phy_type it is called.
> > 
> >  - Added separate macro definition for USB20PHY_CFG register to select
> >    between host/device type usb link.
> > 
> >  - Removing unnecessary argument 'phy_type' from
> > samsung_usbphy_set_type()
> >    and samsung_usbphy_cfg_sel().
> > 
> >  - Addressed few nits:
> > 	-- added macro for 'KHZ'
> > 	-- removing useless 'if' from samsung_usbphy_cfg_sel()
> > 	-- keeping the place of clk_get intact and requesting driver
> > 	   data before that.
> > 
> > Vivek Gautam (4):
> >   ARM: EXYNOS: Update & move usb-phy types to generic include layer
> >   usb: phy: samsung: Add host phy support to samsung-phy driver
> >   USB: ehci-s5p: Add phy driver support
> >   USB: ohci-exynos: Add phy driver support
> > 
> >  .../devicetree/bindings/usb/samsung-usbphy.txt     |   12 +-
> >  drivers/usb/host/ehci-s5p.c                        |   81 +++-
> >  drivers/usb/host/ohci-exynos.c                     |   85 +++-
> >  drivers/usb/phy/Kconfig                            |    2 +-
> >  drivers/usb/phy/samsung-usbphy.c                   |  512
> ++++++++++++++++++--
> >  include/linux/usb/samsung_usb_phy.h                |   16 +
> >  6 files changed, 635 insertions(+), 73 deletions(-)
> >  create mode 100644 include/linux/usb/samsung_usb_phy.h
> > 
> > --
> > 1.7.6.5
> 
> Looks good to me,
> 
> Felipe and Greg, I don't know who should take this series anyway, feel free
> to add  my ack:
> 
> Acked-by: Kukjin Kim <kgene.kim@samsung.com>

I will take care of it. But I need Alan's Acked-by for EHCI and OHCI
parts.

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]