* [PATCH] gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
@ 2013-01-29 12:07 Anatolij Gustschin
2013-02-02 15:11 ` Linus Walleij
2013-02-04 8:10 ` Anatolij Gustschin
0 siblings, 2 replies; 6+ messages in thread
From: Anatolij Gustschin @ 2013-01-29 12:07 UTC (permalink / raw)
To: linux-kernel; +Cc: Grant Likely, Linus Walleij
Exporting gpios throws genirq error messages like
genirq: Setting trigger mode 0 for irq 44 failed
(mpc512x_irq_set_type+0x0/0x18c)
Do not set IRQ_TYPE_NONE in mapping function. Setting this type here
ends up in returning error code in driver's irq_set_type() function
and this triggers the genirq error message.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
---
drivers/gpio/gpio-mpc8xxx.c | 1 -
1 file changed, 1 deletion(-)
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 9ae29cc..a0b33a2 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -292,7 +292,6 @@ static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
irq_set_chip_data(virq, h->host_data);
irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
return 0;
}
--
1.7.11.7
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH] gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
2013-01-29 12:07 [PATCH] gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping Anatolij Gustschin
@ 2013-02-02 15:11 ` Linus Walleij
2013-02-02 19:29 ` Anatolij Gustschin
2013-02-04 8:10 ` Anatolij Gustschin
1 sibling, 1 reply; 6+ messages in thread
From: Linus Walleij @ 2013-02-02 15:11 UTC (permalink / raw)
To: Anatolij Gustschin, Peter Korsgaard, Thomas Gleixner
Cc: linux-kernel, Grant Likely
On Tue, Jan 29, 2013 at 1:07 PM, Anatolij Gustschin <agust@denx.de> wrote:
> Exporting gpios throws genirq error messages like
>
> genirq: Setting trigger mode 0 for irq 44 failed
> (mpc512x_irq_set_type+0x0/0x18c)
>
> Do not set IRQ_TYPE_NONE in mapping function. Setting this type here
> ends up in returning error code in driver's irq_set_type() function
> and this triggers the genirq error message.
>
> Signed-off-by: Anatolij Gustschin <agust@denx.de>
> ---
> drivers/gpio/gpio-mpc8xxx.c | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
> index 9ae29cc..a0b33a2 100644
> --- a/drivers/gpio/gpio-mpc8xxx.c
> +++ b/drivers/gpio/gpio-mpc8xxx.c
> @@ -292,7 +292,6 @@ static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
>
> irq_set_chip_data(virq, h->host_data);
> irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
> - irq_set_irq_type(virq, IRQ_TYPE_NONE);
git blame says this line was put there by the IRQ subsystem maintainer
Thomas Gleixner.
I feel very nervous about removing that, and you need a better explanation
what is causing the problem and how in the commit.
Like I want to know for sure that the problem is not triggered from
somewhere else.
Please write how and where you export this to trigger the error.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
2013-02-02 15:11 ` Linus Walleij
@ 2013-02-02 19:29 ` Anatolij Gustschin
2013-02-03 10:22 ` Peter Korsgaard
0 siblings, 1 reply; 6+ messages in thread
From: Anatolij Gustschin @ 2013-02-02 19:29 UTC (permalink / raw)
To: Linus Walleij
Cc: Peter Korsgaard, Thomas Gleixner, linux-kernel, Grant Likely
On Sat, 2 Feb 2013 16:11:03 +0100
Linus Walleij <linus.walleij@linaro.org> wrote:
> On Tue, Jan 29, 2013 at 1:07 PM, Anatolij Gustschin <agust@denx.de> wrote:
>
> > Exporting gpios throws genirq error messages like
> >
> > genirq: Setting trigger mode 0 for irq 44 failed
> > (mpc512x_irq_set_type+0x0/0x18c)
> >
> > Do not set IRQ_TYPE_NONE in mapping function. Setting this type here
> > ends up in returning error code in driver's irq_set_type() function
> > and this triggers the genirq error message.
> >
> > Signed-off-by: Anatolij Gustschin <agust@denx.de>
> > ---
> > drivers/gpio/gpio-mpc8xxx.c | 1 -
> > 1 file changed, 1 deletion(-)
> >
> > diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
> > index 9ae29cc..a0b33a2 100644
> > --- a/drivers/gpio/gpio-mpc8xxx.c
> > +++ b/drivers/gpio/gpio-mpc8xxx.c
> > @@ -292,7 +292,6 @@ static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
> >
> > irq_set_chip_data(virq, h->host_data);
> > irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
> > - irq_set_irq_type(virq, IRQ_TYPE_NONE);
>
> git blame says this line was put there by the IRQ subsystem maintainer
> Thomas Gleixner.
Thomas renamed the old set_irq_type() call to irq_set_irq_type(), but
this line setting the IRQ_TYPE_NONE type was there before renaming.
It was added by commit 345e5c8a. At this time set_irq_type() checked
its type argument and returned 0 if the type argument didn't specify
some meaningful type in its type sense bits (and thus was equal to
IRQ_TYPE_NONE). Effectively this line was a nop and I wonder what was
the point of adding it.
> I feel very nervous about removing that, and you need a better explanation
> what is causing the problem and how in the commit.
>
> Like I want to know for sure that the problem is not triggered from
> somewhere else.
>
> Please write how and where you export this to trigger the error.
It is very simple to trigger the error, i.e. on mpc5121 based board
using mpc8xxx-gpio driver and exporting GPIO pins over sysfs gpio
interface triggers it:
# cat /sys/class/gpio/gpiochip224/base
224
# echo 229 > /sys/class/gpio/export
[ 83.753709] genirq: Setting trigger mode 0 for irq 44 failed (mpc512x_irq_set_type+0x0/0x164)
Similar error messages appear in the kernel boot log since the
board specifies GPIOs for matrix keypad and also SD Card write
protect and card detect GPIOs in its device tree. For all these
GPIOs there is an error message in the log. Here is an example
call path shown by dump_stack() added in kernel/irq/manage.c:
[ 1.645277] genirq: Setting trigger mode 0 for irq 38 failed (mpc512x_irq_set_type+0x0/0x164)
[ 1.656118] Call Trace:
[ 1.658562] [cf83dc60] [c00088cc] show_stack+0x10c/0x1c0 (unreliable)
[ 1.664962] [cf83dcb0] [c03ae0e8] dump_stack+0x24/0x34
[ 1.670065] [cf83dcc0] [c006d1bc] __irq_set_trigger+0xb8/0x150
[ 1.675859] [cf83dce0] [c006ea24] irq_set_irq_type+0x4c/0x78
[ 1.681483] [cf83dd10] [c01f1c10] mpc8xxx_gpio_irq_map+0x70/0x88
[ 1.687457] [cf83dd20] [c0070578] irq_domain_associate_many+0x104/0x1e4
[ 1.694032] [cf83dd60] [c00706ec] irq_create_mapping+0x94/0x138
[ 1.699915] [cf83dd80] [c01f1d04] mpc8xxx_gpio_to_irq+0x38/0x48
[ 1.705810] [cf83dd90] [c01edbac] __gpio_to_irq+0x58/0x68
[ 1.711177] [cf83dda0] [c02c1504] matrix_keypad_probe+0x3bc/0x7a8
[ 1.717225] [cf83dde0] [c024b14c] platform_drv_probe+0x2c/0x3c
[ 1.723033] [cf83ddf0] [c0249a68] driver_probe_device+0xa0/0x250
[ 1.728993] [cf83de10] [c0249cc0] __driver_attach+0xa8/0xc0
[ 1.734532] [cf83de30] [c0247da0] bus_for_each_dev+0x6c/0xa8
[ 1.740156] [cf83de60] [c02494c8] driver_attach+0x30/0x40
[ 1.745522] [cf83de70] [c0248fe0] bus_add_driver+0x198/0x26c
[ 1.751144] [cf83de90] [c024a07c] driver_register+0x94/0x178
[ 1.756770] [cf83deb0] [c024b2f0] platform_driver_register+0x74/0x84
[ 1.763095] [cf83dec0] [c04ec6bc] matrix_keypad_driver_init+0x18/0x28
[ 1.769492] [cf83ded0] [c00039c0] do_one_initcall+0x144/0x1c4
[ 1.775208] [cf83df00] [c04d28d4] kernel_init_freeable+0x110/0x1b4
[ 1.781347] [cf83df30] [c0003fb8] kernel_init+0x20/0x108
[ 1.786634] [cf83df40] [c000ff20] ret_from_kernel_thread+0x5c/0x64
__irq_set_trigger() calls irq_set_type() callback of the mpc8xxx gpio
irq chip with the IRQ_TYPE_NONE in its 'flags' argument. This callback
is either mpc8xxx_irq_set_type() or mpc512x_irq_set_type(). Both these
functions return -EINVAL in the case if IRQ_TYPE_NONE is passed in the
flow_type argument. This return value triggers the observed error
message in __irq_set_trigger(). Modifying these callbacks to not
return an error in IRQ_TYPE_NONE case doesn't make any sense for me,
so removing the line as the patch does should be okay. If nobody
objects I'll add similar description to commit log of v2 patch.
Turning irq_set_irq_type() into a nop in case of IRQ_TYPE_NONE in
its type argument is not acceptable, commit a09b659cd describes the
reason.
Thanks,
Anatolij
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH] gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
2013-02-02 19:29 ` Anatolij Gustschin
@ 2013-02-03 10:22 ` Peter Korsgaard
0 siblings, 0 replies; 6+ messages in thread
From: Peter Korsgaard @ 2013-02-03 10:22 UTC (permalink / raw)
To: Anatolij Gustschin
Cc: Linus Walleij, Thomas Gleixner, linux-kernel, Grant Likely
>>>>> "Anatolij" == Anatolij Gustschin <agust@denx.de> writes:
Hi,
Anatolij> Thomas renamed the old set_irq_type() call to
Anatolij> irq_set_irq_type(), but this line setting the IRQ_TYPE_NONE
Anatolij> type was there before renaming. It was added by commit
Anatolij> 345e5c8a. At this time set_irq_type() checked its type
Anatolij> argument and returned 0 if the type argument didn't specify
Anatolij> some meaningful type in its type sense bits (and thus was
Anatolij> equal to IRQ_TYPE_NONE). Effectively this line was a nop and
Anatolij> I wonder what was the point of adding it.
Sorry, don't recall. It's been quite a while, and I've haven't worked on
anything mpc8xxx for a few years by now. Most likely one of the other
gpio drivers did it like this back then.
I don't remember the details, but your description makes sense so if
nobody disagrees you can have my:
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
--
Bye, Peter Korsgaard
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH] gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
2013-01-29 12:07 [PATCH] gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping Anatolij Gustschin
2013-02-02 15:11 ` Linus Walleij
@ 2013-02-04 8:10 ` Anatolij Gustschin
2013-02-04 9:13 ` Linus Walleij
1 sibling, 1 reply; 6+ messages in thread
From: Anatolij Gustschin @ 2013-02-04 8:10 UTC (permalink / raw)
To: linus.walleij
Cc: grant.likely, linux-kernel, Peter Korsgaard, Anatolij Gustschin
Exporting gpios over sysfs GPIO interface throws genirq
error messages, i.e. on an mpc5121 based board exporting
GPIO 5 triggers it:
# echo 229 > /sys/class/gpio/export
genirq: Setting trigger mode 0 for irq 44 failed
(mpc512x_irq_set_type+0x0/0x18c)
Similar error messages appear in the kernel boot log since the
board specifies GPIOs for matrix keypad and also SD Card write
protect and card detect GPIOs in its device tree. For all these
GPIOs there is an error message in the log.
The issue is triggered by setting the irq type to IRQ_TYPE_NONE
in the driver's irq_domain map function mpc8xxx_gpio_irq_map().
...
mpc8xxx_gpio_irq_map
irq_set_irq_type
__irq_set_trigger
__irq_set_trigger() calls irq_set_type() callback of the mpc8xxx gpio
irq chip with the IRQ_TYPE_NONE in its 'flags' argument. This callback
is either mpc8xxx_irq_set_type() or mpc512x_irq_set_type(). Both these
functions return -EINVAL in the case if IRQ_TYPE_NONE is passed in the
flow_type argument. This return value triggers the observed error
message in __irq_set_trigger(). Modifying these callbacks to not
return an error in IRQ_TYPE_NONE case doesn't make any sense to me.
The line setting IRQ_TYPE_NONE type has been originally added by
commit 345e5c8a "powerpc: Add interrupt support to mpc8xxx_gpio".
At this time set_irq_type() checked its type argument and returned 0
if the type argument didn't specify any meaningful type in its type
sense bits (and thus was equal to IRQ_TYPE_NONE). Effectively this
line was a nop and I wonder what was the point of adding it.
Remove IRQ_TYPE_NONE setting in the irq_domain mapping function.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
---
drivers/gpio/gpio-mpc8xxx.c | 1 -
1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 5a1817e..0ca67cb 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -292,7 +292,6 @@ static int mpc8xxx_gpio_irq_map(struct irq_domain *h, unsigned int virq,
irq_set_chip_data(virq, h->host_data);
irq_set_chip_and_handler(virq, &mpc8xxx_irq_chip, handle_level_irq);
- irq_set_irq_type(virq, IRQ_TYPE_NONE);
return 0;
}
--
1.7.5.4
^ permalink raw reply related [flat|nested] 6+ messages in thread* Re: [PATCH] gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping
2013-02-04 8:10 ` Anatolij Gustschin
@ 2013-02-04 9:13 ` Linus Walleij
0 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2013-02-04 9:13 UTC (permalink / raw)
To: Anatolij Gustschin; +Cc: grant.likely, linux-kernel, Peter Korsgaard
On Mon, Feb 4, 2013 at 9:10 AM, Anatolij Gustschin <agust@denx.de> wrote:
> Exporting gpios over sysfs GPIO interface throws genirq
> error messages, i.e. on an mpc5121 based board exporting
> GPIO 5 triggers it:
Thanks, I'm convinced now. Applied the v2 patch!
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2013-02-04 9:13 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-01-29 12:07 [PATCH] gpio: mpc8xxx: don't set IRQ_TYPE_NONE when creating irq mapping Anatolij Gustschin
2013-02-02 15:11 ` Linus Walleij
2013-02-02 19:29 ` Anatolij Gustschin
2013-02-03 10:22 ` Peter Korsgaard
2013-02-04 8:10 ` Anatolij Gustschin
2013-02-04 9:13 ` Linus Walleij
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox