From: Konrad Rzeszutek Wilk <konrad@darnok.org>
To: Mukesh Rathor <mukesh.rathor@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>,
"Xen-devel@lists.xensource.com" <Xen-devel@lists.xensource.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Jan Beulich <JBeulich@suse.com>
Subject: Re: [PATCH] PVH: remove code to map iomem from guest
Date: Wed, 6 Feb 2013 10:39:13 -0500 [thread overview]
Message-ID: <20130206153910.GA23029@konrad-lan.dumpdata.com> (raw)
In-Reply-To: <20130130145529.3900dca1@mantra.us.oracle.com>
On Wed, Jan 30, 2013 at 02:55:29PM -0800, Mukesh Rathor wrote:
> It was decided during xen patch review that xen map the iomem
> transparently, so remove xen_set_clr_mmio_pvh_pte() and the sub
> hypercall PHYSDEVOP_map_iomem.
>
Grrrr..
No Signed-off-by??
> ---
> arch/x86/xen/mmu.c | 14 --------------
> arch/x86/xen/setup.c | 16 ++++------------
> include/xen/interface/physdev.h | 10 ----------
> 3 files changed, 4 insertions(+), 36 deletions(-)
>
> diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
> index b4be4c9..fbf6a63 100644
> --- a/arch/x86/xen/mmu.c
> +++ b/arch/x86/xen/mmu.c
> @@ -333,20 +333,6 @@ static void xen_set_pte(pte_t *ptep, pte_t pteval)
> __xen_set_pte(ptep, pteval);
> }
>
> -void xen_set_clr_mmio_pvh_pte(unsigned long pfn, unsigned long mfn,
> - int nr_mfns, int add_mapping)
> -{
> - struct physdev_map_iomem iomem;
> -
> - iomem.first_gfn = pfn;
> - iomem.first_mfn = mfn;
> - iomem.nr_mfns = nr_mfns;
> - iomem.add_mapping = add_mapping;
> -
> - if (HYPERVISOR_physdev_op(PHYSDEVOP_map_iomem, &iomem))
> - BUG();
> -}
> -
> static void xen_set_pte_at(struct mm_struct *mm, unsigned long addr,
> pte_t *ptep, pte_t pteval)
> {
> diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
> index 7e93ec9..6532172 100644
> --- a/arch/x86/xen/setup.c
> +++ b/arch/x86/xen/setup.c
> @@ -235,20 +235,12 @@ static void __init xen_set_identity_and_release_chunk(
> *identity += set_phys_range_identity(start_pfn, end_pfn);
> }
>
> -/* For PVH, the pfns [0..MAX] are mapped to mfn's in the EPT/NPT. The mfns
> - * are released as part of this 1:1 mapping hypercall back to the dom heap.
> - * Also, we map the entire IO space, ie, beyond max_pfn_mapped.
> - */
> -static void __init xen_pvh_identity_map_chunk(unsigned long start_pfn,
> +/* PVH: xen has already mapped the IO space in the EPT/NPT for us, so we
> + * just need to adjust the released and identity count */
> +static void __init xen_pvh_adjust_stats(unsigned long start_pfn,
> unsigned long end_pfn, unsigned long max_pfn,
> unsigned long *released, unsigned long *identity)
> {
> - unsigned long pfn;
> - int numpfns = 1, add_mapping = 1;
> -
> - for (pfn = start_pfn; pfn < end_pfn; pfn++)
> - xen_set_clr_mmio_pvh_pte(pfn, pfn, numpfns, add_mapping);
> -
> if (start_pfn <= max_pfn) {
> unsigned long end = min(max_pfn_mapped, end_pfn);
> *released += end - start_pfn;
> @@ -288,7 +280,7 @@ static unsigned long __init xen_set_identity_and_release(
>
> if (start_pfn < end_pfn) {
> if (xlated_phys) {
> - xen_pvh_identity_map_chunk(start_pfn,
> + xen_pvh_adjust_stats(start_pfn,
> end_pfn, nr_pages, &released,
> &identity);
> } else {
> diff --git a/include/xen/interface/physdev.h b/include/xen/interface/physdev.h
> index 83050d3..1844d31 100644
> --- a/include/xen/interface/physdev.h
> +++ b/include/xen/interface/physdev.h
> @@ -274,16 +274,6 @@ struct physdev_dbgp_op {
> } u;
> };
>
> -#define PHYSDEVOP_map_iomem 30
> -struct physdev_map_iomem {
> - /* IN */
> - uint64_t first_gfn;
> - uint64_t first_mfn;
> - uint32_t nr_mfns;
> - uint32_t add_mapping; /* 1 == add mapping; 0 == unmap */
> -
> -};
> -
> /*
> * Notify that some PIRQ-bound event channels have been unmasked.
> * ** This command is obsolete since interface version 0x00030202 and is **
> --
> 1.7.2.3
>
next prev parent reply other threads:[~2013-02-06 15:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-01-30 22:55 [PATCH] PVH: remove code to map iomem from guest Mukesh Rathor
2013-02-06 15:39 ` Konrad Rzeszutek Wilk [this message]
2013-02-06 21:35 ` Mukesh Rathor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130206153910.GA23029@konrad-lan.dumpdata.com \
--to=konrad@darnok.org \
--cc=JBeulich@suse.com \
--cc=Xen-devel@lists.xensource.com \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mukesh.rathor@oracle.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox