From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Lee Jones <lee.jones@linaro.org>
Cc: linux-kernel@vger.kernel.org, linus.walleij@linaro.org
Subject: Re: [PATCH 05/49] ARM: ux500: regulators: Add mask for configuration
Date: Thu, 7 Feb 2013 18:51:25 +0000 [thread overview]
Message-ID: <20130207185125.GD8879@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1360148051-7560-6-git-send-email-lee.jones@linaro.org>
[-- Attachment #1: Type: text/plain, Size: 566 bytes --]
On Wed, Feb 06, 2013 at 10:53:27AM +0000, Lee Jones wrote:
> There is already before a register mask in the regulator driver
> to allow some bits of a register to be initialized. The register
> value is defined in the board configuration. This patch puts a
> mask in the board configuration to specify which bits should
> actually be altered. The purpose with this patch is to avoid
> future mistakes when updating the allowed bits in the regulator
> driver.
This looks fine but I'll wait for Linus (plus I suspect it depends on
patch 1). Stopped now due to this.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
next prev parent reply other threads:[~2013-02-07 18:51 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-06 10:53 [PATCH 00/49] Regulators: Bring the AB8500 into the 21st century Lee Jones
2013-02-06 10:53 ` [PATCH 01/49] regulator: ab8500: Further populate initialisation registers Lee Jones
2013-02-07 18:45 ` Mark Brown
2013-02-08 8:20 ` Lee Jones
2013-02-08 10:55 ` Mark Brown
2013-02-06 10:53 ` [PATCH 02/49] regulator: ab8500: Add set_mode/get_mode support Lee Jones
2013-02-06 10:53 ` [PATCH 03/49] regulator: ab8500: Fix for regulator_set_mode functionality Lee Jones
2013-02-07 18:47 ` Mark Brown
2013-02-06 10:53 ` [PATCH 04/49] regulator: ab8500: Added get_optimum_mode on regulators with idle mode Lee Jones
2013-02-07 18:49 ` Mark Brown
2013-02-06 10:53 ` [PATCH 05/49] ARM: ux500: regulators: Add mask for configuration Lee Jones
2013-02-07 18:51 ` Mark Brown [this message]
2013-02-07 19:08 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 06/49] regulator: ab8500: Another push to synchronise recent AB8500 developments Lee Jones
2013-02-06 10:53 ` [PATCH 07/49] regulator: ab8500: Separate regulator and MFD platform data Lee Jones
2013-02-06 10:53 ` [PATCH 08/49] regulator: ab8500: Add support of low voltage battery Lee Jones
2013-02-06 10:53 ` [PATCH 09/49] ARM: ux500: Update displays in vaux1 consumer list Lee Jones
2013-02-07 15:34 ` Linus Walleij
2013-02-07 15:55 ` Mark Brown
2013-02-07 17:50 ` Lee Jones
2013-02-07 19:06 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 10/49] regulator: ab8500-ext: Cosmetic changes Lee Jones
2013-02-06 10:53 ` [PATCH 11/49] regulator: ab8500-ext: Add HW request support Lee Jones
2013-02-06 10:53 ` [PATCH 12/49] regulator: ab8500-ext: Add suspend support Lee Jones
2013-02-06 10:53 ` [PATCH 13/49] regulator: ab8500: Remove USB regulator Lee Jones
2013-02-06 10:53 ` [PATCH 14/49] regulator: ab8500: Init debug from regulator driver Lee Jones
2013-02-06 10:53 ` [PATCH 15/49] ARM: ux500: Add supply for the L3G4200D Gyroscope Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-08 4:25 ` Srinidhi Kasagar
2013-02-06 10:53 ` [PATCH 16/49] ARM: ux500: Add supply for the Proximity and Hal sensor Lee Jones
2013-02-07 15:34 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 17/49] ARM: ux500: Add supply for the Ambient light sensor device Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 18/49] ARM: ux500: Add supply for the Pressure sensor Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 19/49] ARM: ux500: Add supply for the Cypress TrueTouch Touchscreen Lee Jones
2013-02-07 15:36 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 20/49] ARM: ux500: regulators: List the MMIO camera as a consumer of VAUX1 Lee Jones
2013-02-07 15:42 ` Linus Walleij
2013-02-06 10:53 ` [PATCH 21/49] regulator: ab8500: Clean out SoC registers Lee Jones
2013-02-06 10:53 ` [PATCH 22/49] regulator: ab8500: Prepare the driver for additional platforms Lee Jones
2013-02-06 10:53 ` [PATCH 23/49] regulator: ab8500: Add support for the ab9540 Lee Jones
2013-02-06 10:53 ` [PATCH 24/49] regulator: ab8500: Correct TVOUT regulator start-up delay Lee Jones
2013-02-06 10:53 ` [PATCH 25/49] regulator: ab8500-ext: Add support for AB8505/AB9540 Lee Jones
2013-02-06 10:53 ` [PATCH 26/49] ARM: ux500: Partially revert changes surrounding audio regulators Lee Jones
2013-02-07 15:38 ` Linus Walleij
2013-02-07 17:54 ` Lee Jones
2013-02-08 12:10 ` Lee Jones
2013-02-06 10:53 ` [PATCH 27/49] regulator: ab8500: add support for ab8505 Lee Jones
2013-02-06 10:53 ` [PATCH 28/49] ARM: ux500: regulator: Use device IDs instead of device names Lee Jones
2013-02-07 15:43 ` Linus Walleij
2013-02-08 11:13 ` Mark Brown
2013-02-06 10:53 ` [PATCH 29/49] regulator: ab8500-ext: Add support for AB9540 regulators Lee Jones
2013-02-06 10:53 ` [PATCH 30/49] regulator: ab8500: Add support for the ab8540 Lee Jones
2013-02-06 10:53 ` [PATCH 31/49] regulator: ab8500: Update voltage handling for fixed voltage regulators Lee Jones
2013-02-06 10:53 ` [PATCH 32/49] regulator: ab8500: Delete useless fixed_uV field Lee Jones
2013-02-06 10:53 ` [PATCH 33/49] regulator: ab8500: Use regulator_list_voltage_table() Lee Jones
2013-02-06 10:53 ` [PATCH 34/49] regulator: ab8500: Fix vsdio parameters for AB8540 based platforms Lee Jones
2013-02-06 10:53 ` [PATCH 35/49] regulator: ab8500: Correct regulator id values Lee Jones
2013-02-06 10:53 ` [PATCH 36/49] regulator: ab8500: Don't register external regulators on AB8505 Lee Jones
2013-02-06 10:53 ` [PATCH 37/49] regulator: ab8500: Add voltage selection for AUDIO and ANA " Lee Jones
2013-02-06 10:54 ` [PATCH 38/49] regulator: ab8500: Also check for AB8505 based platforms Lee Jones
2013-02-06 10:54 ` [PATCH 39/49] regulator: ab8500: Add new operations for Vaux3 Lee Jones
2013-02-06 10:54 ` [PATCH 40/49] regulator: ab8500: Default value on LDO USB to HP Lee Jones
2013-02-06 10:54 ` [PATCH 41/49] regulator: ab8500: Add mode operation for v-amic Lee Jones
2013-02-06 10:54 ` [PATCH 42/49] regulator: ab8500: Update vdmic, vamic[1|2] parameters for AB8540 Lee Jones
2013-02-06 10:54 ` [PATCH 43/49] regulator: ab8500-ext: Adapt regulator registration for newly changed API Lee Jones
2013-02-06 10:54 ` [PATCH 44/49] regulator: ab8500: Use a struct to select the good regulator configuration Lee Jones
2013-02-06 10:54 ` [PATCH 45/49] regulator: ab8500: Introduce aux5, aux6 regulators for AB8540 Lee Jones
2013-02-06 10:54 ` [PATCH 46/49] regulator: ab8500: Set enable enable_time in regulator_desc Lee Jones
2013-02-06 10:54 ` [PATCH 47/49] regulator: ab8500: Remove the need for a 'delay' property Lee Jones
2013-02-06 10:54 ` [PATCH 48/49] regulator: ab8500: Use regulator_list_voltage_table() to look-up voltages Lee Jones
2013-02-06 10:54 ` [PATCH 49/49] ARM: ux500: Pass regulator platform data using the new format Lee Jones
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130207185125.GD8879@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=lee.jones@linaro.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).