From: Ido Yariv <ido@wizery.com>
To: sjur.brandeland@stericsson.com
Cc: Ohad Ben-Cohen <ohad@wizery.com>,
linux-kernel@vger.kernel.org,
Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>,
Linus Walleij <linus.walleij@linaro.org>,
Erwan Yvin <erwan.yvin@stericsson.com>,
sjur@brendeland.net
Subject: Re: [PATCH 3/9] remoteproc: Parse ELF file to find resource table address
Date: Wed, 20 Feb 2013 12:44:46 +0200 [thread overview]
Message-ID: <20130220104446.GC16388@WorkStation.localnet> (raw)
In-Reply-To: <1360496352-29482-4-git-send-email-sjur.brandeland@stericsson.com>
Hi Sjur,
On Sun, Feb 10, 2013 at 12:39:06PM +0100, sjur.brandeland@stericsson.com wrote:
> From: Sjur Brændeland <sjur.brandeland@stericsson.com>
>
> Add function find_rsc_table_va to firmware ops. This function
> returns the location of the resource table in shared memory
> after loading.
>
> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
> ---
> drivers/remoteproc/remoteproc_elf_loader.c | 17 ++++++++++++++++-
> drivers/remoteproc/remoteproc_internal.h | 13 +++++++++++++
> 2 files changed, 29 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/remoteproc/remoteproc_elf_loader.c b/drivers/remoteproc/remoteproc_elf_loader.c
> index a958950..3137fba 100644
> --- a/drivers/remoteproc/remoteproc_elf_loader.c
> +++ b/drivers/remoteproc/remoteproc_elf_loader.c
> @@ -312,9 +312,24 @@ rproc_elf_find_rsc_table(struct rproc *rproc, const struct firmware *fw,
> return table;
> }
>
> +struct resource_table *rproc_elf_get_rsctab_addr(struct rproc *rproc,
> + const struct firmware *fw)
> +{
> + struct elf32_shdr *shdr;
> +
> + shdr = find_rsc_shdr(&rproc->dev, (struct elf32_hdr *)fw->data,
> + fw->size);
> + if (!shdr)
> + return NULL;
> +
> + /* Find resource table in loaded segments */
> + return rproc_da_to_va(rproc, shdr->sh_addr, shdr->sh_size);
> +}
> +
> const struct rproc_fw_ops rproc_elf_fw_ops = {
> .load = rproc_elf_load_segments,
> .find_rsc_table = rproc_elf_find_rsc_table,
> .sanity_check = rproc_elf_sanity_check,
> - .get_boot_addr = rproc_elf_get_boot_addr
> + .get_boot_addr = rproc_elf_get_boot_addr,
> + .get_rsctab_addr = rproc_elf_get_rsctab_addr
Since this new op returns a VA (unlike get_boot_addr), it would probably be
better to use an indicative name like get_rsctab_va.
> };
> diff --git a/drivers/remoteproc/remoteproc_internal.h b/drivers/remoteproc/remoteproc_internal.h
> index 7bb6648..3a5cb7d 100644
> --- a/drivers/remoteproc/remoteproc_internal.h
> +++ b/drivers/remoteproc/remoteproc_internal.h
> @@ -32,6 +32,7 @@ struct rproc;
> * expects to find it
> * @sanity_check: sanity check the fw image
> * @get_boot_addr: get boot address to entry point specified in firmware
> + * @get_rsctab_addr: get resouce table address as specified in firmware
> */
> struct rproc_fw_ops {
> struct resource_table *(*find_rsc_table) (struct rproc *rproc,
> @@ -40,6 +41,8 @@ struct rproc_fw_ops {
> int (*load)(struct rproc *rproc, const struct firmware *fw);
> int (*sanity_check)(struct rproc *rproc, const struct firmware *fw);
> u32 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw);
> + struct resource_table *(*get_rsctab_addr)(struct rproc *rproc,
> + const struct firmware *fw);
> };
>
> /* from remoteproc_core.c */
> @@ -102,6 +105,16 @@ struct resource_table *rproc_find_rsc_table(struct rproc *rproc,
> return NULL;
> }
>
> +static inline
> +struct resource_table *rproc_get_rsctab_addr(struct rproc *rproc,
> + const struct firmware *fw)
> +{
> + if (rproc->fw_ops->get_rsctab_addr)
> + return rproc->fw_ops->get_rsctab_addr(rproc, fw);
> +
> + return NULL;
> +}
> +
> extern const struct rproc_fw_ops rproc_elf_fw_ops;
>
> #endif /* REMOTEPROC_INTERNAL_H */
> --
> 1.7.5.4
>
Thanks,
Ido.
next prev parent reply other threads:[~2013-02-20 10:44 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-10 11:39 [PATCH 0/9] remoteproc: Support bi-directional vdev config space sjur.brandeland
2013-02-10 11:39 ` [PATCH 1/9] remoteproc: Bugfix: Deallocate firmware image on shutdown sjur.brandeland
2013-03-19 12:37 ` Ohad Ben-Cohen
2013-03-19 12:40 ` Sjur BRENDELAND
2013-03-19 13:15 ` Ohad Ben-Cohen
2013-02-10 11:39 ` [PATCH 2/9] remoteproc: Refactor function rproc_elf_find_rsc_table sjur.brandeland
2013-02-20 10:44 ` Ido Yariv
2013-02-10 11:39 ` [PATCH 3/9] remoteproc: Parse ELF file to find resource table address sjur.brandeland
2013-02-20 10:44 ` Ido Yariv [this message]
2013-02-10 11:39 ` [PATCH 4/9] remoteproc: Parse STE-firmware and " sjur.brandeland
2013-02-10 11:39 ` [PATCH 5/9] remoteproc: Set vring addresses in resource table sjur.brandeland
2013-02-10 11:39 ` [PATCH 6/9] remoteproc: Support virtio config space sjur.brandeland
2013-02-20 10:45 ` Ido Yariv
2013-02-10 11:39 ` [PATCH 7/9] remoteproc: Code cleanup of resource parsing sjur.brandeland
2013-02-10 11:39 ` [PATCH 8/9] remoteproc: Calculate max_notifyid by counting vrings sjur.brandeland
2013-02-20 10:45 ` Ido Yariv
2013-02-10 11:39 ` [PATCH 9/9] remoteproc: Always perserve resource table data sjur.brandeland
2013-02-20 10:46 ` Ido Yariv
2013-02-21 15:56 ` Sjur Brændeland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130220104446.GC16388@WorkStation.localnet \
--to=ido@wizery.com \
--cc=dmitry.tarnyagin@stericsson.com \
--cc=erwan.yvin@stericsson.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ohad@wizery.com \
--cc=sjur.brandeland@stericsson.com \
--cc=sjur@brendeland.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox