From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, "Frank Ch. Eigler" <fche@redhat.com>,
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>,
Steven Rostedt <rostedt@goodmis.org>
Subject: [ 05/46] ftrace: Call ftrace cleanup module notifier after all other notifiers
Date: Fri, 1 Mar 2013 11:44:53 -0800 [thread overview]
Message-ID: <20130301194432.850664919@linuxfoundation.org> (raw)
In-Reply-To: <20130301194432.263409302@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>
commit 8c189ea64eea01ca20d102ddb74d6936dd16c579 upstream.
Commit: c1bf08ac "ftrace: Be first to run code modification on modules"
changed ftrace module notifier's priority to INT_MAX in order to
process the ftrace nops before anything else could touch them
(namely kprobes). This was the correct thing to do.
Unfortunately, the ftrace module notifier also contains the ftrace
clean up code. As opposed to the set up code, this code should be
run *after* all the module notifiers have run in case a module is doing
correct clean-up and unregisters its ftrace hooks. Basically, ftrace
needs to do clean up on module removal, as it needs to know about code
being removed so that it doesn't try to modify that code. But after it
removes the module from its records, if a ftrace user tries to remove
a probe, that removal will fail due as the record of that code segment
no longer exists.
Nothing really bad happens if the probe removal is called after ftrace
did the clean up, but the ftrace removal function will return an error.
Correct code (such as kprobes) will produce a WARN_ON() if it fails
to remove the probe. As people get annoyed by frivolous warnings, it's
best to do the ftrace clean up after everything else.
By splitting the ftrace_module_notifier into two notifiers, one that
does the module load setup that is run at high priority, and the other
that is called for module clean up that is run at low priority, the
problem is solved.
Reported-by: Frank Ch. Eigler <fche@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
kernel/trace/ftrace.c | 46 ++++++++++++++++++++++++++++++++--------------
1 file changed, 32 insertions(+), 14 deletions(-)
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3841,37 +3841,51 @@ static void ftrace_init_module(struct mo
ftrace_process_locs(mod, start, end);
}
-static int ftrace_module_notify(struct notifier_block *self,
- unsigned long val, void *data)
+static int ftrace_module_notify_enter(struct notifier_block *self,
+ unsigned long val, void *data)
{
struct module *mod = data;
- switch (val) {
- case MODULE_STATE_COMING:
+ if (val == MODULE_STATE_COMING)
ftrace_init_module(mod, mod->ftrace_callsites,
mod->ftrace_callsites +
mod->num_ftrace_callsites);
- break;
- case MODULE_STATE_GOING:
+ return 0;
+}
+
+static int ftrace_module_notify_exit(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ struct module *mod = data;
+
+ if (val == MODULE_STATE_GOING)
ftrace_release_mod(mod);
- break;
- }
return 0;
}
#else
-static int ftrace_module_notify(struct notifier_block *self,
- unsigned long val, void *data)
+static int ftrace_module_notify_enter(struct notifier_block *self,
+ unsigned long val, void *data)
+{
+ return 0;
+}
+static int ftrace_module_notify_exit(struct notifier_block *self,
+ unsigned long val, void *data)
{
return 0;
}
#endif /* CONFIG_MODULES */
-struct notifier_block ftrace_module_nb = {
- .notifier_call = ftrace_module_notify,
+struct notifier_block ftrace_module_enter_nb = {
+ .notifier_call = ftrace_module_notify_enter,
.priority = INT_MAX, /* Run before anything that can use kprobes */
};
+struct notifier_block ftrace_module_exit_nb = {
+ .notifier_call = ftrace_module_notify_exit,
+ .priority = INT_MIN, /* Run after anything that can remove kprobes */
+};
+
extern unsigned long __start_mcount_loc[];
extern unsigned long __stop_mcount_loc[];
@@ -3903,9 +3917,13 @@ void __init ftrace_init(void)
__start_mcount_loc,
__stop_mcount_loc);
- ret = register_module_notifier(&ftrace_module_nb);
+ ret = register_module_notifier(&ftrace_module_enter_nb);
+ if (ret)
+ pr_warning("Failed to register trace ftrace module enter notifier\n");
+
+ ret = register_module_notifier(&ftrace_module_exit_nb);
if (ret)
- pr_warning("Failed to register trace ftrace module notifier\n");
+ pr_warning("Failed to register trace ftrace module exit notifier\n");
set_ftrace_early_filters();
next prev parent reply other threads:[~2013-03-01 20:06 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-01 19:44 [ 00/46] 3.4.35-stable review Greg Kroah-Hartman
2013-03-01 19:44 ` [ 01/46] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable Greg Kroah-Hartman
2013-03-01 19:44 ` [ 02/46] quota: autoload the quota_v2 module for QFMT_VFS_V1 quota format Greg Kroah-Hartman
2013-03-01 19:44 ` [ 03/46] iommu/amd: Initialize device table after dma_ops Greg Kroah-Hartman
2013-03-01 19:44 ` [ 04/46] posix-timer: Dont call idr_find() with out-of-range ID Greg Kroah-Hartman
2013-03-01 19:44 ` Greg Kroah-Hartman [this message]
2013-03-01 19:44 ` [ 06/46] x86, efi: Make "noefi" really disable EFI runtime serivces Greg Kroah-Hartman
2013-03-01 19:44 ` [ 07/46] doc, xen: Mention earlyprintk=xen in the documentation Greg Kroah-Hartman
2013-03-01 19:44 ` [ 08/46] doc, kernel-parameters: Document console=hvc<n> Greg Kroah-Hartman
2013-03-01 19:44 ` [ 09/46] x86: Make sure we can boot in the case the BDA contains pure garbage Greg Kroah-Hartman
2013-03-01 19:44 ` [ 10/46] target: Fix lookup of dynamic NodeACLs during cached demo-mode operation Greg Kroah-Hartman
2013-03-01 19:44 ` [ 11/46] target: Add missing mapped_lun bounds checking during make_mappedlun setup Greg Kroah-Hartman
2013-03-01 19:45 ` [ 12/46] ocfs2: fix possible use-after-free with AIO Greg Kroah-Hartman
2013-03-01 19:45 ` [ 13/46] ocfs2: fix ocfs2_init_security_and_acl() to initialize acl correctly Greg Kroah-Hartman
2013-03-01 19:45 ` [ 14/46] ocfs2: ac->ac_allow_chain_relink=0 wont disable group relink Greg Kroah-Hartman
2013-03-01 19:45 ` [ 15/46] block: fix ext_devt_idr handling Greg Kroah-Hartman
2013-03-01 19:45 ` [ 16/46] xen-blkback: do not leak mode property Greg Kroah-Hartman
2013-03-01 19:45 ` [ 17/46] xen/blkback: Dont trust the handle from the frontend Greg Kroah-Hartman
2013-03-01 19:45 ` [ 18/46] idr: fix a subtle bug in idr_get_next() Greg Kroah-Hartman
2013-03-01 19:45 ` [ 19/46] block: fix synchronization and limit check in blk_alloc_devt() Greg Kroah-Hartman
2013-03-01 19:45 ` [ 20/46] firewire: add minor number range check to fw_device_init() Greg Kroah-Hartman
2013-03-01 19:45 ` [ 21/46] sysctl: fix null checking in bin_dn_node_address() Greg Kroah-Hartman
2013-03-01 19:45 ` [ 22/46] fs: Fix possible use-after-free with AIO Greg Kroah-Hartman
2013-03-01 19:45 ` [ 23/46] media: rc: unlock on error in show_protocols() Greg Kroah-Hartman
2013-03-01 19:45 ` [ 24/46] ext4: check bh in ext4_read_block_bitmap() Greg Kroah-Hartman
2013-03-01 19:45 ` [ 25/46] ext4: fix race in ext4_mb_add_n_trim() Greg Kroah-Hartman
2013-03-01 19:45 ` [ 26/46] ext4: fix xattr block allocation/release with bigalloc Greg Kroah-Hartman
2013-03-01 19:45 ` [ 27/46] ext4: fix free clusters calculation in bigalloc filesystem Greg Kroah-Hartman
2013-03-01 19:45 ` [ 28/46] nfsd: Fix memleak Greg Kroah-Hartman
2013-03-01 19:45 ` [ 29/46] svcrpc: make svc_age_temp_xprts enqueue under sv_lock Greg Kroah-Hartman
2013-03-01 19:45 ` [ 30/46] vhost: fix length for cross region descriptor Greg Kroah-Hartman
2013-03-01 19:45 ` [ 31/46] fuse: dont WARN when nlink is zero Greg Kroah-Hartman
2013-03-01 19:45 ` [ 32/46] unbreak automounter support on 64-bit kernel with 32-bit userspace (v2) Greg Kroah-Hartman
2013-03-01 19:45 ` [ 33/46] ath9k_hw: fix calibration issues on chainmask that dont include chain 0 Greg Kroah-Hartman
2013-03-01 19:45 ` [ 34/46] pstore: Avoid deadlock in panic and emergency-restart path Greg Kroah-Hartman
2013-03-01 19:45 ` [ 35/46] cpuset: fix cpuset_print_task_mems_allowed() vs rename() race Greg Kroah-Hartman
2013-03-01 19:45 ` [ 36/46] cgroup: fix exit() vs rmdir() race Greg Kroah-Hartman
2013-03-01 19:45 ` [ 37/46] ab8500-chargalg: Only root should have write permission on sysfs file Greg Kroah-Hartman
2013-03-01 19:45 ` [ 38/46] ab8500_btemp: Demote initcall sequence Greg Kroah-Hartman
2013-03-01 19:45 ` [ 39/46] ACPI: Add DMI entry for Sony VGN-FW41E_H Greg Kroah-Hartman
2013-03-01 19:45 ` [ 40/46] staging: comedi: ni_labpc: correct differential channel sequence for AI commands Greg Kroah-Hartman
2013-03-01 19:45 ` [ 41/46] staging: comedi: ni_labpc: set up command4 register *after* command3 Greg Kroah-Hartman
2013-03-01 19:45 ` [ 42/46] staging: comedi: check s->async for poll(), read() and write() Greg Kroah-Hartman
2013-03-01 19:45 ` [ 43/46] perf tools: Fix build with bison 2.3 and older Greg Kroah-Hartman
2013-03-01 19:45 ` [ 44/46] ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs Greg Kroah-Hartman
2013-03-01 19:45 ` [ 45/46] ata_piix: Add Device IDs for Intel Wellsburg PCH Greg Kroah-Hartman
2013-03-01 19:45 ` [ 46/46] [hid] usb hid quirks for Masterkit MA901 usb radio Greg Kroah-Hartman
2013-03-02 3:59 ` [ 00/46] 3.4.35-stable review Shuah Khan
2013-03-03 11:48 ` Satoru Takeuchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130301194432.850664919@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=fche@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=masami.hiramatsu.pt@hitachi.com \
--cc=rostedt@goodmis.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox