[ 00/46] 3.4.35-stable review

[ 00/46] 3.4.35-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 3.4.35 release.
There are 46 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Mar  3 19:44:00 UTC 2013.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.35-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.4.35-rc1

Alexey Klimov <klimov.linux@gmail.com>
    usb hid quirks for Masterkit MA901 usb radio

James Ralston <james.d.ralston@intel.com>
    ata_piix: Add Device IDs for Intel Wellsburg PCH

Seth Heasley <seth.heasley@intel.com>
    ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs

Vinson Lee <vlee@twitter.com>
    perf tools: Fix build with bison 2.3 and older.

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: check s->async for poll(), read() and write()

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: ni_labpc: set up command4 register *after* command3

Ian Abbott <abbotti@mev.co.uk>
    staging: comedi: ni_labpc: correct differential channel sequence for AI commands

Joseph Salisbury <joseph.salisbury@canonical.com>
    ACPI: Add DMI entry for Sony VGN-FW41E_H

Rajanikanth H.V <rajanikanth.hv@stericsson.com>
    ab8500_btemp: Demote initcall sequence

Lee Jones <lee.jones@linaro.org>
    ab8500-chargalg: Only root should have write permission on sysfs file

Li Zefan <lizefan@huawei.com>
    cgroup: fix exit() vs rmdir() race

Li Zefan <lizefan@huawei.com>
    cpuset: fix cpuset_print_task_mems_allowed() vs rename() race

Seiji Aguchi <seiji.aguchi@hds.com>
    pstore: Avoid deadlock in panic and emergency-restart path

Felix Fietkau <nbd@openwrt.org>
    ath9k_hw: fix calibration issues on chainmask that don't include chain 0

Helge Deller <deller@gmx.de>
    unbreak automounter support on 64-bit kernel with 32-bit userspace (v2)

Miklos Szeredi <mszeredi@suse.cz>
    fuse: don't WARN when nlink is zero

Michael S. Tsirkin <mst@redhat.com>
    vhost: fix length for cross region descriptor

J. Bruce Fields <bfields@redhat.com>
    svcrpc: make svc_age_temp_xprts enqueue under sv_lock

majianpeng <majianpeng@gmail.com>
    nfsd: Fix memleak

Lukas Czerner <lczerner@redhat.com>
    ext4: fix free clusters calculation in bigalloc filesystem

Lukas Czerner <lczerner@redhat.com>
    ext4: fix xattr block allocation/release with bigalloc

Niu Yawei <yawei.niu@gmail.com>
    ext4: fix race in ext4_mb_add_n_trim()

Eryu Guan <guaneryu@gmail.com>
    ext4: check bh in ext4_read_block_bitmap()

Dan Carpenter <dan.carpenter@oracle.com>
    media: rc: unlock on error in show_protocols()

Jan Kara <jack@suse.cz>
    fs: Fix possible use-after-free with AIO

Xi Wang <xi.wang@gmail.com>
    sysctl: fix null checking in bin_dn_node_address()

Tejun Heo <tj@kernel.org>
    firewire: add minor number range check to fw_device_init()

Tejun Heo <tj@kernel.org>
    block: fix synchronization and limit check in blk_alloc_devt()

Tejun Heo <tj@kernel.org>
    idr: fix a subtle bug in idr_get_next()

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    xen/blkback: Don't trust the handle from the frontend.

Jan Beulich <JBeulich@suse.com>
    xen-blkback: do not leak mode property

Tomas Henzl <thenzl@redhat.com>
    block: fix ext_devt_idr handling

Xiaowei.Hu <xiaowei.hu@oracle.com>
    ocfs2: ac->ac_allow_chain_relink=0 won't disable group relink

Jeff Liu <jeff.liu@oracle.com>
    ocfs2: fix ocfs2_init_security_and_acl() to initialize acl correctly

Jan Kara <jack@suse.cz>
    ocfs2: fix possible use-after-free with AIO

Nicholas Bellinger <nab@linux-iscsi.org>
    target: Add missing mapped_lun bounds checking during make_mappedlun setup

Nicholas Bellinger <nab@linux-iscsi.org>
    target: Fix lookup of dynamic NodeACLs during cached demo-mode operation

H. Peter Anvin <hpa@linux.intel.com>
    x86: Make sure we can boot in the case the BDA contains pure garbage

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    doc, kernel-parameters: Document 'console=hvc<n>'

Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
    doc, xen: Mention 'earlyprintk=xen' in the documentation.

Matt Fleming <matt.fleming@intel.com>
    x86, efi: Make "noefi" really disable EFI runtime serivces

Steven Rostedt (Red Hat) <rostedt@goodmis.org>
    ftrace: Call ftrace cleanup module notifier after all other notifiers

Tejun Heo <tj@kernel.org>
    posix-timer: Don't call idr_find() with out-of-range ID

Joerg Roedel <joro@8bytes.org>
    iommu/amd: Initialize device table after dma_ops

Theodore Ts'o <tytso@mit.edu>
    quota: autoload the quota_v2 module for QFMT_VFS_V1 quota format

David Henningsson <david.henningsson@canonical.com>
    ALSA: hda - hdmi: Make jacks phantom, if they're not detectable


-------------

Diffstat:

 Documentation/kernel-parameters.txt           |  5 +++
 Makefile                                      |  4 +-
 arch/x86/kernel/head.c                        | 53 +++++++++++++++++----------
 arch/x86/platform/efi/efi.c                   |  5 ++-
 block/genhd.c                                 | 15 ++++----
 block/partition-generic.c                     |  2 +-
 drivers/acpi/sleep.c                          |  8 ++++
 drivers/ata/ata_piix.c                        | 17 +++++++++
 drivers/block/xen-blkback/blkback.c           |  1 -
 drivers/block/xen-blkback/xenbus.c            | 49 ++++++++++++-------------
 drivers/firewire/core-device.c                |  4 ++
 drivers/hid/hid-core.c                        |  1 +
 drivers/hid/hid-ids.h                         |  3 ++
 drivers/iommu/amd_iommu_init.c                |  9 ++++-
 drivers/media/rc/rc-main.c                    |  4 +-
 drivers/net/wireless/ath/ath9k/ar9003_calib.c |  2 +
 drivers/net/wireless/ath/ath9k/ar9003_phy.c   |  2 +-
 drivers/net/wireless/ath/ath9k/hw.h           |  1 +
 drivers/power/ab8500_btemp.c                  |  2 +-
 drivers/power/abx500_chargalg.c               |  2 +-
 drivers/staging/comedi/comedi_fops.c          |  8 ++--
 drivers/staging/comedi/drivers/ni_labpc.c     | 35 ++++++++++--------
 drivers/target/target_core_device.c           | 13 ++-----
 drivers/target/target_core_fabric_configfs.c  | 12 +++++-
 drivers/target/target_core_internal.h         |  2 +-
 drivers/target/target_core_tpg.c              | 10 +----
 drivers/vhost/vhost.c                         |  2 +-
 fs/direct-io.c                                |  2 +-
 fs/ext4/balloc.c                              | 13 +++++--
 fs/ext4/mballoc.c                             |  6 +--
 fs/ext4/xattr.c                               |  7 ++--
 fs/fuse/dir.c                                 |  9 ++++-
 fs/nfsd/nfs4state.c                           |  2 +
 fs/ocfs2/aops.c                               |  2 +-
 fs/ocfs2/suballoc.c                           |  7 ++--
 fs/ocfs2/suballoc.h                           |  2 +-
 fs/ocfs2/xattr.c                              |  2 +-
 fs/pstore/platform.c                          | 35 +++++++++++++++---
 include/linux/auto_fs.h                       | 25 ++++---------
 include/linux/pstore.h                        |  6 +++
 include/linux/quota.h                         |  1 +
 kernel/cgroup.c                               |  8 ++++
 kernel/cpuset.c                               | 12 +++++-
 kernel/posix-timers.c                         |  7 ++++
 kernel/sysctl_binary.c                        |  3 +-
 kernel/trace/ftrace.c                         | 46 ++++++++++++++++-------
 lib/idr.c                                     |  9 ++++-
 net/sunrpc/svc_xprt.c                         | 15 +-------
 sound/pci/hda/patch_hdmi.c                    |  3 ++
 tools/perf/Makefile                           |  4 +-
 tools/perf/util/parse-events.y                |  1 -
 tools/perf/util/pmu.y                         |  1 -
 52 files changed, 319 insertions(+), 180 deletions(-)

[ 01/46] ALSA: hda - hdmi: Make jacks phantom, if theyre not detectable

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Henningsson <david.henningsson@canonical.com>

commit 30efd8debd1ef30be342d374f01e993509f5b76b upstream.

Just as for analog codecs, a jack that isn't suitable for detection
(in this case, NO_PRESENCE was set) should be a phantom Jack
instead of a normal one.

Thanks to Raymond Yau for spotting.

BugLink: https://bugs.launchpad.net/bugs/961286
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=903869
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/pci/hda/patch_hdmi.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/sound/pci/hda/patch_hdmi.c
+++ b/sound/pci/hda/patch_hdmi.c
@@ -1244,6 +1244,9 @@ static int generic_hdmi_build_jack(struc
 
 	if (pcmdev > 0)
 		sprintf(hdmi_str + strlen(hdmi_str), ",pcm=%d", pcmdev);
+	if (!is_jack_detectable(codec, per_pin->pin_nid))
+		strncat(hdmi_str, " Phantom",
+			sizeof(hdmi_str) - strlen(hdmi_str) - 1);
 
 	return snd_hda_jack_add_kctl(codec, per_pin->pin_nid, hdmi_str, 0);
 }

[ 02/46] quota: autoload the quota_v2 module for QFMT_VFS_V1 quota format

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Theodore Ts'o <tytso@mit.edu>

commit c3ad83d9efdfe6a86efd44945a781f00c879b7b4 upstream.

Otherwise, ext4 file systems with the quota featured enable will get a
very confusing "No such process" error message if the quota code is
built as a module and the quota_v2 module has not been loaded.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/quota.h |    1 +
 1 file changed, 1 insertion(+)

--- a/include/linux/quota.h
+++ b/include/linux/quota.h
@@ -417,6 +417,7 @@ struct quota_module_name {
 #define INIT_QUOTA_MODULE_NAMES {\
 	{QFMT_VFS_OLD, "quota_v1"},\
 	{QFMT_VFS_V0, "quota_v2"},\
+	{QFMT_VFS_V1, "quota_v2"},\
 	{0, NULL}}
 
 #endif /* __KERNEL__ */

[ 03/46] iommu/amd: Initialize device table after dma_ops

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joerg Roedel <joro@8bytes.org>

commit f528d980c17b8714aedc918ba86e058af914d66b upstream.

When dma_ops are initialized the unity mappings are
created. The init_device_table_dma() function makes sure DMA
from all devices is blocked by default. This opens a short
window in time where DMA to unity mapped regions is blocked
by the IOMMU. Make sure this does not happen by initializing
the device table after dma_ops.

Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/amd_iommu_init.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1572,8 +1572,6 @@ int __init amd_iommu_init_hardware(void)
 	if (amd_iommu_pd_alloc_bitmap == NULL)
 		goto free;
 
-	/* init the device table */
-	init_device_table();
 
 	/*
 	 * let all alias entries point to itself
@@ -1655,6 +1653,7 @@ out:
  */
 static int __init amd_iommu_init(void)
 {
+	struct amd_iommu *iommu;
 	int ret = 0;
 
 	ret = amd_iommu_init_hardware();
@@ -1673,6 +1672,12 @@ static int __init amd_iommu_init(void)
 	if (ret)
 		goto free;
 
+	/* init the device table */
+	init_device_table();
+
+	for_each_iommu(iommu)
+		iommu_flush_all_caches(iommu);
+
 	amd_iommu_init_api();
 
 	x86_platform.iommu_shutdown = disable_iommus;

[ 04/46] posix-timer: Dont call idr_find() with out-of-range ID

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit e182bb38d7db7494fa5dcd82da17fe0dedf60ecf upstream.

When idr_find() was fed a negative ID, it used to look up the ID
ignoring the sign bit before recent ("idr: remove MAX_IDR_MASK and
move left MAX_IDR_* into idr.c") patch. Now a negative ID triggers
a WARN_ON_ONCE().

__lock_timer() feeds timer_id from userland directly to idr_find()
without sanitizing it which can trigger the above malfunctions.  Add a
range check on @timer_id before invoking idr_find() in __lock_timer().

While timer_t is defined as int by all archs at the moment, Andrew
worries that it may be defined as a larger type later on.  Make the
test cover larger integers too so that it at least is guaranteed to
not return the wrong timer.

Note that WARN_ON_ONCE() in idr_find() on id < 0 is transitional
precaution while moving away from ignoring MSB.  Once it's gone we can
remove the guard as long as timer_t isn't larger than int.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20130220232412.GL3570@htj.dyndns.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/posix-timers.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/kernel/posix-timers.c
+++ b/kernel/posix-timers.c
@@ -639,6 +639,13 @@ static struct k_itimer *__lock_timer(tim
 {
 	struct k_itimer *timr;
 
+	/*
+	 * timer_t could be any type >= int and we want to make sure any
+	 * @timer_id outside positive int range fails lookup.
+	 */
+	if ((unsigned long long)timer_id > INT_MAX)
+		return NULL;
+
 	rcu_read_lock();
 	timr = idr_find(&posix_timers_id, (int)timer_id);
 	if (timr) {

[ 05/46] ftrace: Call ftrace cleanup module notifier after all other notifiers

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org>

commit 8c189ea64eea01ca20d102ddb74d6936dd16c579 upstream.

Commit: c1bf08ac "ftrace: Be first to run code modification on modules"

changed ftrace module notifier's priority to INT_MAX in order to
process the ftrace nops before anything else could touch them
(namely kprobes). This was the correct thing to do.

Unfortunately, the ftrace module notifier also contains the ftrace
clean up code. As opposed to the set up code, this code should be
run *after* all the module notifiers have run in case a module is doing
correct clean-up and unregisters its ftrace hooks. Basically, ftrace
needs to do clean up on module removal, as it needs to know about code
being removed so that it doesn't try to modify that code. But after it
removes the module from its records, if a ftrace user tries to remove
a probe, that removal will fail due as the record of that code segment
no longer exists.

Nothing really bad happens if the probe removal is called after ftrace
did the clean up, but the ftrace removal function will return an error.
Correct code (such as kprobes) will produce a WARN_ON() if it fails
to remove the probe. As people get annoyed by frivolous warnings, it's
best to do the ftrace clean up after everything else.

By splitting the ftrace_module_notifier into two notifiers, one that
does the module load setup that is run at high priority, and the other
that is called for module clean up that is run at low priority, the
problem is solved.

Reported-by: Frank Ch. Eigler <fche@redhat.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/ftrace.c |   46 ++++++++++++++++++++++++++++++++--------------
 1 file changed, 32 insertions(+), 14 deletions(-)

--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -3841,37 +3841,51 @@ static void ftrace_init_module(struct mo
 	ftrace_process_locs(mod, start, end);
 }
 
-static int ftrace_module_notify(struct notifier_block *self,
-				unsigned long val, void *data)
+static int ftrace_module_notify_enter(struct notifier_block *self,
+				      unsigned long val, void *data)
 {
 	struct module *mod = data;
 
-	switch (val) {
-	case MODULE_STATE_COMING:
+	if (val == MODULE_STATE_COMING)
 		ftrace_init_module(mod, mod->ftrace_callsites,
 				   mod->ftrace_callsites +
 				   mod->num_ftrace_callsites);
-		break;
-	case MODULE_STATE_GOING:
+	return 0;
+}
+
+static int ftrace_module_notify_exit(struct notifier_block *self,
+				     unsigned long val, void *data)
+{
+	struct module *mod = data;
+
+	if (val == MODULE_STATE_GOING)
 		ftrace_release_mod(mod);
-		break;
-	}
 
 	return 0;
 }
 #else
-static int ftrace_module_notify(struct notifier_block *self,
-				unsigned long val, void *data)
+static int ftrace_module_notify_enter(struct notifier_block *self,
+				      unsigned long val, void *data)
+{
+	return 0;
+}
+static int ftrace_module_notify_exit(struct notifier_block *self,
+				     unsigned long val, void *data)
 {
 	return 0;
 }
 #endif /* CONFIG_MODULES */
 
-struct notifier_block ftrace_module_nb = {
-	.notifier_call = ftrace_module_notify,
+struct notifier_block ftrace_module_enter_nb = {
+	.notifier_call = ftrace_module_notify_enter,
 	.priority = INT_MAX,	/* Run before anything that can use kprobes */
 };
 
+struct notifier_block ftrace_module_exit_nb = {
+	.notifier_call = ftrace_module_notify_exit,
+	.priority = INT_MIN,	/* Run after anything that can remove kprobes */
+};
+
 extern unsigned long __start_mcount_loc[];
 extern unsigned long __stop_mcount_loc[];
 
@@ -3903,9 +3917,13 @@ void __init ftrace_init(void)
 				  __start_mcount_loc,
 				  __stop_mcount_loc);
 
-	ret = register_module_notifier(&ftrace_module_nb);
+	ret = register_module_notifier(&ftrace_module_enter_nb);
+	if (ret)
+		pr_warning("Failed to register trace ftrace module enter notifier\n");
+
+	ret = register_module_notifier(&ftrace_module_exit_nb);
 	if (ret)
-		pr_warning("Failed to register trace ftrace module notifier\n");
+		pr_warning("Failed to register trace ftrace module exit notifier\n");
 
 	set_ftrace_early_filters();
 

[ 06/46] x86, efi: Make "noefi" really disable EFI runtime serivces

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matt Fleming <matt.fleming@intel.com>

commit fb834c7acc5e140cf4f9e86da93a66de8c0514da upstream.

commit 1de63d60cd5b ("efi: Clear EFI_RUNTIME_SERVICES rather than
EFI_BOOT by "noefi" boot parameter") attempted to make "noefi" true to
its documentation and disable EFI runtime services to prevent the
bricking bug described in commit e0094244e41c ("samsung-laptop:
Disable on EFI hardware"). However, it's not possible to clear
EFI_RUNTIME_SERVICES from an early param function because
EFI_RUNTIME_SERVICES is set in efi_init() *after* parse_early_param().

This resulted in "noefi" effectively becoming a no-op and no longer
providing users with a way to disable EFI, which is bad for those
users that have buggy machines.

Reported-by: Walt Nelson Jr <walt0924@gmail.com>
Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/1361392572-25657-1-git-send-email-matt@console-pimps.org
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/platform/efi/efi.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -84,9 +84,10 @@ int efi_enabled(int facility)
 }
 EXPORT_SYMBOL(efi_enabled);
 
+static bool disable_runtime = false;
 static int __init setup_noefi(char *arg)
 {
-	clear_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
+	disable_runtime = true;
 	return 0;
 }
 early_param("noefi", setup_noefi);
@@ -733,7 +734,7 @@ void __init efi_init(void)
 	if (!efi_is_native())
 		pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n");
 	else {
-		if (efi_runtime_init())
+		if (disable_runtime || efi_runtime_init())
 			return;
 		set_bit(EFI_RUNTIME_SERVICES, &x86_efi_facility);
 	}

[ 07/46] doc, xen: Mention earlyprintk=xen in the documentation.

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 2482a92e7d17187301d7313cfe5021b13393a0b4 upstream.

The earlyprintk for Xen PV guests utilizes a simple hypercall
(console_io) to provide output to Xen emergency console.

Note that the Xen hypervisor should be booted with 'loglevel=all'
to output said information.

Reported-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1361825650-14031-2-git-send-email-konrad.wilk@oracle.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/kernel-parameters.txt |    3 +++
 1 file changed, 3 insertions(+)

--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -742,6 +742,7 @@ bytes respectively. Such letter suffixes
 
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
+			earlyprintk=xen
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
@@ -759,6 +760,8 @@ bytes respectively. Such letter suffixes
 			The VGA output is eventually overwritten by the real
 			console.
 
+			The xen output can only be used by Xen PV guests.
+
 	ekgdboc=	[X86,KGDB] Allow early kernel console debugging
 			ekgdboc=kbd
 

[ 08/46] doc, kernel-parameters: Document console=hvc<n>

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit a2fd6419174470f5ae6383f5037d0ee21ed9833f upstream.

Both the PowerPC hypervisor and Xen hypervisor can utilize the
hvc driver.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Link: http://lkml.kernel.org/r/1361825650-14031-3-git-send-email-konrad.wilk@oracle.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 Documentation/kernel-parameters.txt |    2 ++
 1 file changed, 2 insertions(+)

--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -557,6 +557,8 @@ bytes respectively. Such letter suffixes
 			UART at the specified I/O port or MMIO address,
 			switching to the matching ttyS device later.  The
 			options are the same as for ttyS, above.
+		hvc<n>	Use the hypervisor console device <n>. This is for
+			both Xen and PowerPC hypervisors.
 
                 If the device connected to the port is not a TTY but a braille
                 device, prepend "brl," before the device type, for instance

[ 09/46] x86: Make sure we can boot in the case the BDA contains pure garbage

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "H. Peter Anvin" <hpa@linux.intel.com>

commit 7c10093692ed2e6f318387d96b829320aa0ca64c upstream.

On non-BIOS platforms it is possible that the BIOS data area contains
garbage instead of being zeroed or something equivalent (firmware
people: we are talking of 1.5K here, so please do the sane thing.)

We need on the order of 20-30K of low memory in order to boot, which
may grow up to < 64K in the future.  We probably want to avoid the
lowest of the low memory.  At the same time, it seems extremely
unlikely that a legitimate EBDA would ever reach down to the 128K
(which would require it to be over half a megabyte in size.)  Thus,
pick 128K as the cutoff for "this is insane, ignore."  We may still
end up reserving a bunch of extra memory on the low megabyte, but that
is not really a major issue these days.  In the worst case we lose
512K of RAM.

This code really should be merged with trim_bios_range() in
arch/x86/kernel/setup.c, but that is a bigger patch for a later merge
window.

Reported-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/n/tip-oebml055yyfm8yxmria09rja@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/head.c |   57 ++++++++++++++++++++++++++++++-------------------
 1 file changed, 36 insertions(+), 21 deletions(-)

--- a/arch/x86/kernel/head.c
+++ b/arch/x86/kernel/head.c
@@ -5,8 +5,6 @@
 #include <asm/setup.h>
 #include <asm/bios_ebda.h>
 
-#define BIOS_LOWMEM_KILOBYTES 0x413
-
 /*
  * The BIOS places the EBDA/XBDA at the top of conventional
  * memory, and usually decreases the reported amount of
@@ -16,17 +14,30 @@
  * chipset: reserve a page before VGA to prevent PCI prefetch
  * into it (errata #56). Usually the page is reserved anyways,
  * unless you have no PS/2 mouse plugged in.
+ *
+ * This functions is deliberately very conservative.  Losing
+ * memory in the bottom megabyte is rarely a problem, as long
+ * as we have enough memory to install the trampoline.  Using
+ * memory that is in use by the BIOS or by some DMA device
+ * the BIOS didn't shut down *is* a big problem.
  */
+
+#define BIOS_LOWMEM_KILOBYTES	0x413
+#define LOWMEM_CAP		0x9f000U	/* Absolute maximum */
+#define INSANE_CUTOFF		0x20000U	/* Less than this = insane */
+
 void __init reserve_ebda_region(void)
 {
 	unsigned int lowmem, ebda_addr;
 
-	/* To determine the position of the EBDA and the */
-	/* end of conventional memory, we need to look at */
-	/* the BIOS data area. In a paravirtual environment */
-	/* that area is absent. We'll just have to assume */
-	/* that the paravirt case can handle memory setup */
-	/* correctly, without our help. */
+	/*
+	 * To determine the position of the EBDA and the
+	 * end of conventional memory, we need to look at
+	 * the BIOS data area. In a paravirtual environment
+	 * that area is absent. We'll just have to assume
+	 * that the paravirt case can handle memory setup
+	 * correctly, without our help.
+	 */
 	if (paravirt_enabled())
 		return;
 
@@ -37,19 +48,23 @@ void __init reserve_ebda_region(void)
 	/* start of EBDA area */
 	ebda_addr = get_bios_ebda();
 
-	/* Fixup: bios puts an EBDA in the top 64K segment */
-	/* of conventional memory, but does not adjust lowmem. */
-	if ((lowmem - ebda_addr) <= 0x10000)
-		lowmem = ebda_addr;
-
-	/* Fixup: bios does not report an EBDA at all. */
-	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
-	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
-		lowmem = 0x9f000;
-
-	/* Paranoia: should never happen, but... */
-	if ((lowmem == 0) || (lowmem >= 0x100000))
-		lowmem = 0x9f000;
+	/*
+	 * Note: some old Dells seem to need 4k EBDA without
+	 * reporting so, so just consider the memory above 0x9f000
+	 * to be off limits (bugzilla 2990).
+	 */
+
+	/* If the EBDA address is below 128K, assume it is bogus */
+	if (ebda_addr < INSANE_CUTOFF)
+		ebda_addr = LOWMEM_CAP;
+
+	/* If lowmem is less than 128K, assume it is bogus */
+	if (lowmem < INSANE_CUTOFF)
+		lowmem = LOWMEM_CAP;
+
+	/* Use the lower of the lowmem and EBDA markers as the cutoff */
+	lowmem = min(lowmem, ebda_addr);
+	lowmem = min(lowmem, LOWMEM_CAP); /* Absolute cap */
 
 	/* reserve all memory between lowmem and the 1MB mark */
 	memblock_reserve(lowmem, 0x100000 - lowmem);

[ 10/46] target: Fix lookup of dynamic NodeACLs during cached demo-mode operation

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit fcf29481fb8e106daad6688f2e898226ee928992 upstream.

This patch fixes a bug in core_tpg_check_initiator_node_acl() ->
core_tpg_get_initiator_node_acl() where a dynamically created
se_node_acl generated during session login would be skipped during
subsequent lookup due to the '!acl->dynamic_node_acl' check, causing
a new se_node_acl to be created with a duplicate ->initiatorname.

This would occur when a fabric endpoint was configured with
TFO->tpg_check_demo_mode()=1 + TPF->tpg_check_demo_mode_cache()=1
preventing the release of an existing se_node_acl during se_session
shutdown.

Also, drop the unnecessary usage of core_tpg_get_initiator_node_acl()
within core_dev_init_initiator_node_lun_acl() that originally
required the extra '!acl->dynamic_node_acl' check, and just pass
the configfs provided se_node_acl pointer instead.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_device.c          |   13 ++++---------
 drivers/target/target_core_fabric_configfs.c |    4 ++--
 drivers/target/target_core_internal.h        |    2 +-
 drivers/target/target_core_tpg.c             |   10 ++--------
 4 files changed, 9 insertions(+), 20 deletions(-)

--- a/drivers/target/target_core_device.c
+++ b/drivers/target/target_core_device.c
@@ -1483,24 +1483,18 @@ static struct se_lun *core_dev_get_lun(s
 
 struct se_lun_acl *core_dev_init_initiator_node_lun_acl(
 	struct se_portal_group *tpg,
+	struct se_node_acl *nacl,
 	u32 mapped_lun,
-	char *initiatorname,
 	int *ret)
 {
 	struct se_lun_acl *lacl;
-	struct se_node_acl *nacl;
 
-	if (strlen(initiatorname) >= TRANSPORT_IQN_LEN) {
+	if (strlen(nacl->initiatorname) >= TRANSPORT_IQN_LEN) {
 		pr_err("%s InitiatorName exceeds maximum size.\n",
 			tpg->se_tpg_tfo->get_fabric_name());
 		*ret = -EOVERFLOW;
 		return NULL;
 	}
-	nacl = core_tpg_get_initiator_node_acl(tpg, initiatorname);
-	if (!nacl) {
-		*ret = -EINVAL;
-		return NULL;
-	}
 	lacl = kzalloc(sizeof(struct se_lun_acl), GFP_KERNEL);
 	if (!lacl) {
 		pr_err("Unable to allocate memory for struct se_lun_acl.\n");
@@ -1511,7 +1505,8 @@ struct se_lun_acl *core_dev_init_initiat
 	INIT_LIST_HEAD(&lacl->lacl_list);
 	lacl->mapped_lun = mapped_lun;
 	lacl->se_lun_nacl = nacl;
-	snprintf(lacl->initiatorname, TRANSPORT_IQN_LEN, "%s", initiatorname);
+	snprintf(lacl->initiatorname, TRANSPORT_IQN_LEN, "%s",
+		 nacl->initiatorname);
 
 	return lacl;
 }
--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -357,8 +357,8 @@ static struct config_group *target_fabri
 		goto out;
 	}
 
-	lacl = core_dev_init_initiator_node_lun_acl(se_tpg, mapped_lun,
-			config_item_name(acl_ci), &ret);
+	lacl = core_dev_init_initiator_node_lun_acl(se_tpg, se_nacl,
+			mapped_lun, &ret);
 	if (!lacl) {
 		ret = -EINVAL;
 		goto out;
--- a/drivers/target/target_core_internal.h
+++ b/drivers/target/target_core_internal.h
@@ -61,7 +61,7 @@ struct se_lun *core_dev_add_lun(struct s
 int	core_dev_del_lun(struct se_portal_group *, u32);
 struct se_lun *core_get_lun_from_tpg(struct se_portal_group *, u32);
 struct se_lun_acl *core_dev_init_initiator_node_lun_acl(struct se_portal_group *,
-		u32, char *, int *);
+		struct se_node_acl *, u32, int *);
 int	core_dev_add_initiator_node_lun_acl(struct se_portal_group *,
 		struct se_lun_acl *, u32, u32);
 int	core_dev_del_initiator_node_lun_acl(struct se_portal_group *,
--- a/drivers/target/target_core_tpg.c
+++ b/drivers/target/target_core_tpg.c
@@ -114,16 +114,10 @@ struct se_node_acl *core_tpg_get_initiat
 	struct se_node_acl *acl;
 
 	spin_lock_irq(&tpg->acl_node_lock);
-	list_for_each_entry(acl, &tpg->acl_node_list, acl_list) {
-		if (!strcmp(acl->initiatorname, initiatorname) &&
-		    !acl->dynamic_node_acl) {
-			spin_unlock_irq(&tpg->acl_node_lock);
-			return acl;
-		}
-	}
+	acl = __core_tpg_get_initiator_node_acl(tpg, initiatorname);
 	spin_unlock_irq(&tpg->acl_node_lock);
 
-	return NULL;
+	return acl;
 }
 
 /*	core_tpg_add_node_to_devs():

[ 11/46] target: Add missing mapped_lun bounds checking during make_mappedlun setup

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nicholas Bellinger <nab@linux-iscsi.org>

commit fbbf8555a986ed31e54f006b6cc637ea4ff1425b upstream.

This patch adds missing bounds checking for the configfs provided
mapped_lun value during target_fabric_make_mappedlun() setup ahead
of se_lun_acl initialization.

This addresses a potential OOPs when using a mapped_lun value that
exceeds the hardcoded TRANSPORT_MAX_LUNS_PER_TPG-1 value within
se_node_acl->device_list[].

Reported-by: Jan Engelhardt <jengelh@inai.de>
Cc: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/target/target_core_fabric_configfs.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/target/target_core_fabric_configfs.c
+++ b/drivers/target/target_core_fabric_configfs.c
@@ -356,6 +356,14 @@ static struct config_group *target_fabri
 		ret = -EINVAL;
 		goto out;
 	}
+	if (mapped_lun > (TRANSPORT_MAX_LUNS_PER_TPG-1)) {
+		pr_err("Mapped LUN: %lu exceeds TRANSPORT_MAX_LUNS_PER_TPG"
+			"-1: %u for Target Portal Group: %u\n", mapped_lun,
+			TRANSPORT_MAX_LUNS_PER_TPG-1,
+			se_tpg->se_tpg_tfo->tpg_get_tag(se_tpg));
+		ret = -EINVAL;
+		goto out;
+	}
 
 	lacl = core_dev_init_initiator_node_lun_acl(se_tpg, se_nacl,
 			mapped_lun, &ret);

[ 12/46] ocfs2: fix possible use-after-free with AIO

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 9b171e0c74ca0549d0610990a862dd895870f04a upstream.

Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ocfs2/aops.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ocfs2/aops.c
+++ b/fs/ocfs2/aops.c
@@ -593,9 +593,9 @@ static void ocfs2_dio_end_io(struct kioc
 	level = ocfs2_iocb_rw_locked_level(iocb);
 	ocfs2_rw_unlock(inode, level);
 
+	inode_dio_done(inode);
 	if (is_async)
 		aio_complete(iocb, ret, 0);
-	inode_dio_done(inode);
 }
 
 /*

[ 13/46] ocfs2: fix ocfs2_init_security_and_acl() to initialize acl correctly

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeff Liu <jeff.liu@oracle.com>

commit 32918dd9f19e5960af4cdfa41190bb843fb2247b upstream.

We need to re-initialize the security for a new reflinked inode with its
parent dirs if it isn't specified to be preserved for ocfs2_reflink().
However, the code logic is broken at ocfs2_init_security_and_acl()
although ocfs2_init_security_get() succeed.  As a result,
ocfs2_acl_init() does not involked and therefore the default ACL of
parent dir was missing on the new inode.

Note this was introduced by 9d8f13ba3 ("security: new
security_inode_init_security API adds function callback")

To reproduce:

    set default ACL for the parent dir(ocfs2 in this case):
    $ setfacl -m default:user:jeff:rwx ../ocfs2/
    $ getfacl ../ocfs2/
    # file: ../ocfs2/
    # owner: jeff
    # group: jeff
    user::rwx
    group::r-x
    other::r-x
    default:user::rwx
    default:user:jeff:rwx
    default:group::r-x
    default:mask::rwx
    default:other::r-x

    $ touch a
    $ getfacl a
    # file: a
    # owner: jeff
    # group: jeff
    user::rw-
    group::rw-
    other::r--

Before patching, create reflink file b from a, the user
default ACL entry(user:jeff:rwx)was missing:

    $ ./ocfs2_reflink a b
    $ getfacl b
    # file: b
    # owner: jeff
    # group: jeff
    user::rw-
    group::rw-
    other::r--

In this case, the end user can also observed an error message at syslog:

  (ocfs2_reflink,3229,2):ocfs2_init_security_and_acl:7193 ERROR: status = 0

After applying this patch, create reflink file c from a:

    $ ./ocfs2_reflink a c
    $ getfacl c
    # file: c
    # owner: jeff
    # group: jeff
    user::rw-
    user:jeff:rwx			#effective:rw-
    group::r-x			#effective:r--
    mask::rw-
    other::r--

Test program:
/* Usage: reflink <source> <dest> */
#include <stdio.h>
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <errno.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/ioctl.h>

static int
reflink_file(char const *src_name, char const *dst_name,
	     bool preserve_attrs)
{
	int fd;

#ifndef REFLINK_ATTR_NONE
#  define REFLINK_ATTR_NONE 0
#endif
#ifndef REFLINK_ATTR_PRESERVE
#  define REFLINK_ATTR_PRESERVE 1
#endif
#ifndef OCFS2_IOC_REFLINK
	struct reflink_arguments {
		uint64_t old_path;
		uint64_t new_path;
		uint64_t preserve;
	};

#  define OCFS2_IOC_REFLINK _IOW ('o', 4, struct reflink_arguments)
#endif
	struct reflink_arguments args = {
		.old_path = (unsigned long) src_name,
		.new_path = (unsigned long) dst_name,
		.preserve = preserve_attrs ? REFLINK_ATTR_PRESERVE :
					     REFLINK_ATTR_NONE,
	};

	fd = open(src_name, O_RDONLY);
	if (fd < 0) {
		fprintf(stderr, "Failed to open %s: %s\n",
			src_name, strerror(errno));
		return -1;
	}

	if (ioctl(fd, OCFS2_IOC_REFLINK, &args) < 0) {
		fprintf(stderr, "Failed to reflink %s to %s: %s\n",
			src_name, dst_name, strerror(errno));
		return -1;
	}
}

int
main(int argc, char *argv[])
{
	if (argc != 3) {
		fprintf(stdout, "Usage: %s source dest\n", argv[0]);
		return 1;
	}

	return reflink_file(argv[1], argv[2], 0);
}

Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Tao Ma <boyu.mt@taobao.com>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ocfs2/xattr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/ocfs2/xattr.c
+++ b/fs/ocfs2/xattr.c
@@ -7189,7 +7189,7 @@ int ocfs2_init_security_and_acl(struct i
 	struct buffer_head *dir_bh = NULL;
 
 	ret = ocfs2_init_security_get(inode, dir, qstr, NULL);
-	if (!ret) {
+	if (ret) {
 		mlog_errno(ret);
 		goto leave;
 	}

[ 14/46] ocfs2: ac->ac_allow_chain_relink=0 wont disable group relink

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Xiaowei.Hu" <xiaowei.hu@oracle.com>

commit 309a85b6861fedbb48a22d45e0e079d1be993b3a upstream.

ocfs2_block_group_alloc_discontig() disables chain relink by setting
ac->ac_allow_chain_relink = 0 because it grabs clusters from multiple
cluster groups.

It doesn't keep the credits for all chain relink,but
ocfs2_claim_suballoc_bits overrides this in this call trace:
ocfs2_block_group_claim_bits()->ocfs2_claim_clusters()->
__ocfs2_claim_clusters()->ocfs2_claim_suballoc_bits()
ocfs2_claim_suballoc_bits set ac->ac_allow_chain_relink = 1; then call
ocfs2_search_chain() one time and disable it again, and then we run out
of credits.

Fix is to allow relink by default and disable it in
ocfs2_block_group_alloc_discontig.

Without this patch, End-users will run into a crash due to run out of
credits, backtrace like this:

  RIP: 0010:[<ffffffffa0808b14>]  [<ffffffffa0808b14>]
  jbd2_journal_dirty_metadata+0x164/0x170 [jbd2]
  RSP: 0018:ffff8801b919b5b8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: ffff88022139ddc0 RCX: ffff880159f652d0
  RDX: ffff880178aa3000 RSI: ffff880159f652d0 RDI: ffff880087f09bf8
  RBP: ffff8801b919b5e8 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000001e00 R11: 00000000000150b0 R12: ffff880159f652d0
  R13: ffff8801a0cae908 R14: ffff880087f09bf8 R15: ffff88018d177800
  FS:  00007fc9b0b6b6e0(0000) GS:ffff88022fd40000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
  CR2: 000000000040819c CR3: 0000000184017000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process dd (pid: 9945, threadinfo ffff8801b919a000, task ffff880149a264c0)
  Call Trace:
    ocfs2_journal_dirty+0x2f/0x70 [ocfs2]
    ocfs2_relink_block_group+0x111/0x480 [ocfs2]
    ocfs2_search_chain+0x455/0x9a0 [ocfs2]
    ...

Signed-off-by: Xiaowei.Hu <xiaowei.hu@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ocfs2/suballoc.c |    7 +++----
 fs/ocfs2/suballoc.h |    2 +-
 2 files changed, 4 insertions(+), 5 deletions(-)

--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -642,7 +642,7 @@ ocfs2_block_group_alloc_discontig(handle
 	 * cluster groups will be staying in cache for the duration of
 	 * this operation.
 	 */
-	ac->ac_allow_chain_relink = 0;
+	ac->ac_disable_chain_relink = 1;
 
 	/* Claim the first region */
 	status = ocfs2_block_group_claim_bits(osb, handle, ac, min_bits,
@@ -1823,7 +1823,7 @@ static int ocfs2_search_chain(struct ocf
 	 * Do this *after* figuring out how many bits we're taking out
 	 * of our target group.
 	 */
-	if (ac->ac_allow_chain_relink &&
+	if (!ac->ac_disable_chain_relink &&
 	    (prev_group_bh) &&
 	    (ocfs2_block_group_reasonably_empty(bg, res->sr_bits))) {
 		status = ocfs2_relink_block_group(handle, alloc_inode,
@@ -1928,7 +1928,6 @@ static int ocfs2_claim_suballoc_bits(str
 
 	victim = ocfs2_find_victim_chain(cl);
 	ac->ac_chain = victim;
-	ac->ac_allow_chain_relink = 1;
 
 	status = ocfs2_search_chain(ac, handle, bits_wanted, min_bits,
 				    res, &bits_left);
@@ -1947,7 +1946,7 @@ static int ocfs2_claim_suballoc_bits(str
 	 * searching each chain in order. Don't allow chain relinking
 	 * because we only calculate enough journal credits for one
 	 * relink per alloc. */
-	ac->ac_allow_chain_relink = 0;
+	ac->ac_disable_chain_relink = 1;
 	for (i = 0; i < le16_to_cpu(cl->cl_next_free_rec); i ++) {
 		if (i == victim)
 			continue;
--- a/fs/ocfs2/suballoc.h
+++ b/fs/ocfs2/suballoc.h
@@ -49,7 +49,7 @@ struct ocfs2_alloc_context {
 
 	/* these are used by the chain search */
 	u16    ac_chain;
-	int    ac_allow_chain_relink;
+	int    ac_disable_chain_relink;
 	group_search_t *ac_group_search;
 
 	u64    ac_last_group;

[ 15/46] block: fix ext_devt_idr handling

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomas Henzl <thenzl@redhat.com>

commit 7b74e912785a11572da43292786ed07ada7e3e0c upstream.

While adding and removing a lot of disks disks and partitions this
sometimes shows up:

  WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xc9/0x130() (Not tainted)
  Hardware name:
  sysfs: cannot create duplicate filename '/dev/block/259:751'
  Modules linked in: raid1 autofs4 bnx2fc cnic uio fcoe libfcoe libfc 8021q scsi_transport_fc scsi_tgt garp stp llc sunrpc cpufreq_ondemand powernow_k8 freq_table mperf ipv6 dm_mirror dm_region_hash dm_log power_meter microcode dcdbas serio_raw amd64_edac_mod edac_core edac_mce_amd i2c_piix4 i2c_core k10temp bnx2 sg ixgbe dca mdio ext4 mbcache jbd2 dm_round_robin sr_mod cdrom sd_mod crc_t10dif ata_generic pata_acpi pata_atiixp ahci mptsas mptscsih mptbase scsi_transport_sas dm_multipath dm_mod [last unloaded: scsi_wait_scan]
  Pid: 44103, comm: async/16 Not tainted 2.6.32-195.el6.x86_64 #1
  Call Trace:
    warn_slowpath_common+0x87/0xc0
    warn_slowpath_fmt+0x46/0x50
    sysfs_add_one+0xc9/0x130
    sysfs_do_create_link+0x12b/0x170
    sysfs_create_link+0x13/0x20
    device_add+0x317/0x650
    idr_get_new+0x13/0x50
    add_partition+0x21c/0x390
    rescan_partitions+0x32b/0x470
    sd_open+0x81/0x1f0 [sd_mod]
    __blkdev_get+0x1b6/0x3c0
    blkdev_get+0x10/0x20
    register_disk+0x155/0x170
    add_disk+0xa6/0x160
    sd_probe_async+0x13b/0x210 [sd_mod]
    add_wait_queue+0x46/0x60
    async_thread+0x102/0x250
    default_wake_function+0x0/0x20
    async_thread+0x0/0x250
    kthread+0x96/0xa0
    child_rip+0xa/0x20
    kthread+0x0/0xa0
    child_rip+0x0/0x20

This most likely happens because dev_t is freed while the number is
still used and idr_get_new() is not protected on every use.  The fix
adds a mutex where it wasn't before and moves the dev_t free function so
it is called after device del.

Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/genhd.c             |    6 +++++-
 block/partition-generic.c |    2 +-
 2 files changed, 6 insertions(+), 2 deletions(-)

--- a/block/genhd.c
+++ b/block/genhd.c
@@ -420,14 +420,18 @@ int blk_alloc_devt(struct hd_struct *par
 	do {
 		if (!idr_pre_get(&ext_devt_idr, GFP_KERNEL))
 			return -ENOMEM;
+		mutex_lock(&ext_devt_mutex);
 		rc = idr_get_new(&ext_devt_idr, part, &idx);
+		mutex_unlock(&ext_devt_mutex);
 	} while (rc == -EAGAIN);
 
 	if (rc)
 		return rc;
 
 	if (idx > MAX_EXT_DEVT) {
+		mutex_lock(&ext_devt_mutex);
 		idr_remove(&ext_devt_idr, idx);
+		mutex_unlock(&ext_devt_mutex);
 		return -EBUSY;
 	}
 
@@ -644,7 +648,6 @@ void del_gendisk(struct gendisk *disk)
 	disk_part_iter_exit(&piter);
 
 	invalidate_partition(disk, 0);
-	blk_free_devt(disk_to_dev(disk)->devt);
 	set_capacity(disk, 0);
 	disk->flags &= ~GENHD_FL_UP;
 
@@ -662,6 +665,7 @@ void del_gendisk(struct gendisk *disk)
 	if (!sysfs_deprecated)
 		sysfs_remove_link(block_depr, dev_name(disk_to_dev(disk)));
 	device_del(disk_to_dev(disk));
+	blk_free_devt(disk_to_dev(disk)->devt);
 }
 EXPORT_SYMBOL(del_gendisk);
 
--- a/block/partition-generic.c
+++ b/block/partition-generic.c
@@ -249,11 +249,11 @@ void delete_partition(struct gendisk *di
 	if (!part)
 		return;
 
-	blk_free_devt(part_devt(part));
 	rcu_assign_pointer(ptbl->part[partno], NULL);
 	rcu_assign_pointer(ptbl->last_lookup, NULL);
 	kobject_put(part->holder_dir);
 	device_del(part_to_dev(part));
+	blk_free_devt(part_devt(part));
 
 	hd_struct_put(part);
 }

[ 16/46] xen-blkback: do not leak mode property

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Beulich <JBeulich@suse.com>

commit 9d092603cc306ee6edfe917bf9ab8beb5f32d7bc upstream.

"be->mode" is obtained from xenbus_read(), which does a kmalloc() for
the message body. The short string is never released, so do it along
with freeing "be" itself, and make sure the string isn't kept when
backend_changed() doesn't complete successfully (which made it
desirable to slightly re-structure that function, so that the error
cleanup can be done in one place).

Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/xen-blkback/xenbus.c |   49 ++++++++++++++++++-------------------
 1 file changed, 24 insertions(+), 25 deletions(-)

--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -367,6 +367,7 @@ static int xen_blkbk_remove(struct xenbu
 		be->blkif = NULL;
 	}
 
+	kfree(be->mode);
 	kfree(be);
 	dev_set_drvdata(&dev->dev, NULL);
 	return 0;
@@ -502,6 +503,7 @@ static void backend_changed(struct xenbu
 		= container_of(watch, struct backend_info, backend_watch);
 	struct xenbus_device *dev = be->dev;
 	int cdrom = 0;
+	unsigned long handle;
 	char *device_type;
 
 	DPRINTK("");
@@ -521,10 +523,10 @@ static void backend_changed(struct xenbu
 		return;
 	}
 
-	if ((be->major || be->minor) &&
-	    ((be->major != major) || (be->minor != minor))) {
-		pr_warn(DRV_PFX "changing physical device (from %x:%x to %x:%x) not supported.\n",
-			be->major, be->minor, major, minor);
+	if (be->major | be->minor) {
+		if (be->major != major || be->minor != minor)
+			pr_warn(DRV_PFX "changing physical device (from %x:%x to %x:%x) not supported.\n",
+				be->major, be->minor, major, minor);
 		return;
 	}
 
@@ -542,36 +544,33 @@ static void backend_changed(struct xenbu
 		kfree(device_type);
 	}
 
-	if (be->major == 0 && be->minor == 0) {
-		/* Front end dir is a number, which is used as the handle. */
+	/* Front end dir is a number, which is used as the handle. */
+	err = strict_strtoul(strrchr(dev->otherend, '/') + 1, 0, &handle);
+	if (err)
+		return;
 
-		char *p = strrchr(dev->otherend, '/') + 1;
-		long handle;
-		err = strict_strtoul(p, 0, &handle);
-		if (err)
-			return;
+	be->major = major;
+	be->minor = minor;
 
-		be->major = major;
-		be->minor = minor;
-
-		err = xen_vbd_create(be->blkif, handle, major, minor,
-				 (NULL == strchr(be->mode, 'w')), cdrom);
-		if (err) {
-			be->major = 0;
-			be->minor = 0;
-			xenbus_dev_fatal(dev, err, "creating vbd structure");
-			return;
-		}
+	err = xen_vbd_create(be->blkif, handle, major, minor,
+			     !strchr(be->mode, 'w'), cdrom);
 
+	if (err)
+		xenbus_dev_fatal(dev, err, "creating vbd structure");
+	else {
 		err = xenvbd_sysfs_addif(dev);
 		if (err) {
 			xen_vbd_free(&be->blkif->vbd);
-			be->major = 0;
-			be->minor = 0;
 			xenbus_dev_fatal(dev, err, "creating sysfs entries");
-			return;
 		}
+	}
 
+	if (err) {
+		kfree(be->mode);
+		be->mode = NULL;
+		be->major = 0;
+		be->minor = 0;
+	} else {
 		/* We're potentially connected now */
 		xen_update_blkif_status(be->blkif);
 	}

[ 17/46] xen/blkback: Dont trust the handle from the frontend.

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>

commit 01c681d4c70d64cb72142a2823f27c4146a02e63 upstream.

The 'handle' is the device that the request is from. For the life-time
of the ring we copy it from a request to a response so that the frontend
is not surprised by it. But we do not need it - when we start processing
I/Os we have our own 'struct phys_req' which has only most essential
information about the request. In fact the 'vbd_translate' ends up
over-writing the preq.dev with a value from the backend.

This assignment of preq.dev with the 'handle' value is superfluous
so lets not do it.

Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/xen-blkback/blkback.c |    1 -
 1 file changed, 1 deletion(-)

--- a/drivers/block/xen-blkback/blkback.c
+++ b/drivers/block/xen-blkback/blkback.c
@@ -623,7 +623,6 @@ static int dispatch_rw_block_io(struct x
 		goto fail_response;
 	}
 
-	preq.dev           = req->u.rw.handle;
 	preq.sector_number = req->u.rw.sector_number;
 	preq.nr_sects      = 0;
 

[ 18/46] idr: fix a subtle bug in idr_get_next()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 6cdae7416a1c45c2ce105a78187d9b7e8feb9e24 upstream.

The iteration logic of idr_get_next() is borrowed mostly verbatim from
idr_for_each().  It walks down the tree looking for the slot matching
the current ID.  If the matching slot is not found, the ID is
incremented by the distance of single slot at the given level and
repeats.

The implementation assumes that during the whole iteration id is aligned
to the layer boundaries of the level closest to the leaf, which is true
for all iterations starting from zero or an existing element and thus is
fine for idr_for_each().

However, idr_get_next() may be given any point and if the starting id
hits in the middle of a non-existent layer, increment to the next layer
will end up skipping the same offset into it.  For example, an IDR with
IDs filled between [64, 127] would look like the following.

          [  0  64 ... ]
       /----/   |
       |        |
      NULL    [ 64 ... 127 ]

If idr_get_next() is called with 63 as the starting point, it will try
to follow down the pointer from 0.  As it is NULL, it will then try to
proceed to the next slot in the same level by adding the slot distance
at that level which is 64 - making the next try 127.  It goes around the
loop and finds and returns 127 skipping [64, 126].

Note that this bug also triggers in idr_for_each_entry() loop which
deletes during iteration as deletions can make layers go away leaving
the iteration with unaligned ID into missing layers.

Fix it by ensuring proceeding to the next slot doesn't carry over the
unaligned offset - ie.  use round_up(id + 1, slot_distance) instead of
id += slot_distance.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: David Teigland <teigland@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 lib/idr.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/lib/idr.c
+++ b/lib/idr.c
@@ -625,7 +625,14 @@ void *idr_get_next(struct idr *idp, int
 			return p;
 		}
 
-		id += 1 << n;
+		/*
+		 * Proceed to the next layer at the current level.  Unlike
+		 * idr_for_each(), @id isn't guaranteed to be aligned to
+		 * layer boundary at this point and adding 1 << n may
+		 * incorrectly skip IDs.  Make sure we jump to the
+		 * beginning of the next layer using round_up().
+		 */
+		id = round_up(id + 1, 1 << n);
 		while (n < fls(id)) {
 			n += IDR_BITS;
 			p = *--paa;

[ 19/46] block: fix synchronization and limit check in blk_alloc_devt()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit ce23bba842aee98092225d9576dba47c82352521 upstream.

idr allocation in blk_alloc_devt() wasn't synchronized against lookup
and removal, and its limit check was off by one - 1 << MINORBITS is
the number of minors allowed, not the maximum allowed minor.

Add locking and rename MAX_EXT_DEVT to NR_EXT_DEVT and fix limit
checking.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/genhd.c |   13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)

--- a/block/genhd.c
+++ b/block/genhd.c
@@ -25,7 +25,7 @@ static DEFINE_MUTEX(block_class_lock);
 struct kobject *block_depr;
 
 /* for extended dynamic devt allocation, currently only one major is used */
-#define MAX_EXT_DEVT		(1 << MINORBITS)
+#define NR_EXT_DEVT		(1 << MINORBITS)
 
 /* For extended devt allocation.  ext_devt_mutex prevents look up
  * results from going away underneath its user.
@@ -422,19 +422,16 @@ int blk_alloc_devt(struct hd_struct *par
 			return -ENOMEM;
 		mutex_lock(&ext_devt_mutex);
 		rc = idr_get_new(&ext_devt_idr, part, &idx);
+		if (!rc && idx >= NR_EXT_DEVT) {
+			idr_remove(&ext_devt_idr, idx);
+			rc = -EBUSY;
+		}
 		mutex_unlock(&ext_devt_mutex);
 	} while (rc == -EAGAIN);
 
 	if (rc)
 		return rc;
 
-	if (idx > MAX_EXT_DEVT) {
-		mutex_lock(&ext_devt_mutex);
-		idr_remove(&ext_devt_idr, idx);
-		mutex_unlock(&ext_devt_mutex);
-		return -EBUSY;
-	}
-
 	*devt = MKDEV(BLOCK_EXT_MAJOR, blk_mangle_minor(idx));
 	return 0;
 }

[ 20/46] firewire: add minor number range check to fw_device_init()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 3bec60d511179853138836ae6e1b61fe34d9235f upstream.

fw_device_init() didn't check whether the allocated minor number isn't
too large.  Fail if it goes overflows MINORBITS.

Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/firewire/core-device.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/firewire/core-device.c
+++ b/drivers/firewire/core-device.c
@@ -999,6 +999,10 @@ static void fw_device_init(struct work_s
 	ret = idr_pre_get(&fw_device_idr, GFP_KERNEL) ?
 	      idr_get_new(&fw_device_idr, device, &minor) :
 	      -ENOMEM;
+	if (minor >= 1 << MINORBITS) {
+		idr_remove(&fw_device_idr, minor);
+		minor = -ENOSPC;
+	}
 	up_write(&fw_device_rwsem);
 
 	if (ret < 0)

[ 21/46] sysctl: fix null checking in bin_dn_node_address()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Xi Wang <xi.wang@gmail.com>

commit df1778be1a33edffa51d094eeda87c858ded6560 upstream.

The null check of `strchr() + 1' is broken, which is always non-null,
leading to OOB read.  Instead, check the result of strchr().

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/sysctl_binary.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/kernel/sysctl_binary.c
+++ b/kernel/sysctl_binary.c
@@ -1194,9 +1194,10 @@ static ssize_t bin_dn_node_address(struc
 
 		/* Convert the decnet address to binary */
 		result = -EIO;
-		nodep = strchr(buf, '.') + 1;
+		nodep = strchr(buf, '.');
 		if (!nodep)
 			goto out;
+		++nodep;
 
 		area = simple_strtoul(buf, NULL, 10);
 		node = simple_strtoul(nodep, NULL, 10);

[ 22/46] fs: Fix possible use-after-free with AIO

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Kara <jack@suse.cz>

commit 54c807e71d5ac59dee56c685f2b66e27cd54c475 upstream.

Running AIO is pinning inode in memory using file reference. Once AIO
is completed using aio_complete(), file reference is put and inode can
be freed from memory. So we have to be sure that calling aio_complete()
is the last thing we do with the inode.

Acked-by: Jeff Moyer <jmoyer@redhat.com>
CC: Christoph Hellwig <hch@infradead.org>
CC: Jens Axboe <axboe@kernel.dk>
CC: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/direct-io.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/direct-io.c
+++ b/fs/direct-io.c
@@ -305,9 +305,9 @@ static ssize_t dio_complete(struct dio *
 		dio->end_io(dio->iocb, offset, transferred,
 			    dio->private, ret, is_async);
 	} else {
+		inode_dio_done(dio->inode);
 		if (is_async)
 			aio_complete(dio->iocb, ret, 0);
-		inode_dio_done(dio->inode);
 	}
 
 	return ret;

[ 23/46] media: rc: unlock on error in show_protocols()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 30ebc5e44d057a1619ad63fe32c8c1670c37c4b8 upstream.

We recently introduced a new return -ENODEV in this function but we need
to unlock before returning.

[mchehab@redhat.com: found two patches with the same fix. Merged SOB's/acks into one patch]
Acked-by: Herton R. Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Douglas Bagnall <douglas@paradise.net.nz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/rc/rc-main.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -778,8 +778,10 @@ static ssize_t show_protocols(struct dev
 	} else if (dev->raw) {
 		enabled = dev->raw->enabled_protocols;
 		allowed = ir_raw_get_allowed_protocols();
-	} else
+	} else {
+		mutex_unlock(&dev->lock);
 		return -ENODEV;
+	}
 
 	IR_dprintk(1, "allowed - 0x%llx, enabled - 0x%llx\n",
 		   (long long)allowed,

[ 24/46] ext4: check bh in ext4_read_block_bitmap()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eryu Guan <guaneryu@gmail.com>

commit 15b49132fc972c63894592f218ea5a9a61b1a18f upstream.

Validate the bh pointer before using it, since
ext4_read_block_bitmap_nowait() might return NULL.

I've seen this in fsfuzz testing.

 EXT4-fs error (device loop0): ext4_read_block_bitmap_nowait:385: comm touch: Cannot get buffer for block bitmap - block_group = 0, block_bitmap = 3925999616
 BUG: unable to handle kernel NULL pointer dereference at           (null)
 IP: [<ffffffff8121de25>] ext4_wait_block_bitmap+0x25/0xe0
 ...
 Call Trace:
  [<ffffffff8121e1e5>] ext4_read_block_bitmap+0x35/0x60
  [<ffffffff8125e9c6>] ext4_free_blocks+0x236/0xb80
  [<ffffffff811d0d36>] ? __getblk+0x36/0x70
  [<ffffffff811d0a5f>] ? __find_get_block+0x8f/0x210
  [<ffffffff81191ef3>] ? kmem_cache_free+0x33/0x140
  [<ffffffff812678e5>] ext4_xattr_release_block+0x1b5/0x1d0
  [<ffffffff812679be>] ext4_xattr_delete_inode+0xbe/0x100
  [<ffffffff81222a7c>] ext4_free_inode+0x7c/0x4d0
  [<ffffffff812277b8>] ? ext4_mark_inode_dirty+0x88/0x230
  [<ffffffff8122993c>] ext4_evict_inode+0x32c/0x490
  [<ffffffff811b8cd7>] evict+0xa7/0x1c0
  [<ffffffff811b8ed3>] iput_final+0xe3/0x170
  [<ffffffff811b8f9e>] iput+0x3e/0x50
  [<ffffffff812316fd>] ext4_add_nondir+0x4d/0x90
  [<ffffffff81231d0b>] ext4_create+0xeb/0x170
  [<ffffffff811aae9c>] vfs_create+0xac/0xd0
  [<ffffffff811ac845>] lookup_open+0x185/0x1c0
  [<ffffffff8129e3b9>] ? selinux_inode_permission+0xa9/0x170
  [<ffffffff811acb54>] do_last+0x2d4/0x7a0
  [<ffffffff811af743>] path_openat+0xb3/0x480
  [<ffffffff8116a8a1>] ? handle_mm_fault+0x251/0x3b0
  [<ffffffff811afc49>] do_filp_open+0x49/0xa0
  [<ffffffff811bbaad>] ? __alloc_fd+0xdd/0x150
  [<ffffffff8119da28>] do_sys_open+0x108/0x1f0
  [<ffffffff8119db51>] sys_open+0x21/0x30
  [<ffffffff81618959>] system_call_fastpath+0x16/0x1b

Also fix comment for ext4_read_block_bitmap_nowait()

Signed-off-by: Eryu Guan <guaneryu@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/balloc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -326,7 +326,7 @@ err_out:
 	return 0;
 }
 /**
- * ext4_read_block_bitmap()
+ * ext4_read_block_bitmap_nowait()
  * @sb:			super block
  * @block_group:	given block group
  *
@@ -422,6 +422,8 @@ ext4_read_block_bitmap(struct super_bloc
 	struct buffer_head *bh;
 
 	bh = ext4_read_block_bitmap_nowait(sb, block_group);
+	if (!bh)
+		return NULL;
 	if (ext4_wait_block_bitmap(sb, block_group, bh)) {
 		put_bh(bh);
 		return NULL;

[ 25/46] ext4: fix race in ext4_mb_add_n_trim()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Niu Yawei <yawei.niu@gmail.com>

commit f1167009711032b0d747ec89a632a626c901a1ad upstream.

In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when
changing the lg_prealloc_list.

Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/mballoc.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -4126,7 +4126,7 @@ static void ext4_mb_add_n_trim(struct ex
 		/* The max size of hash table is PREALLOC_TB_SIZE */
 		order = PREALLOC_TB_SIZE - 1;
 	/* Add the prealloc space to lg */
-	rcu_read_lock();
+	spin_lock(&lg->lg_prealloc_lock);
 	list_for_each_entry_rcu(tmp_pa, &lg->lg_prealloc_list[order],
 						pa_inode_list) {
 		spin_lock(&tmp_pa->pa_lock);
@@ -4150,12 +4150,12 @@ static void ext4_mb_add_n_trim(struct ex
 	if (!added)
 		list_add_tail_rcu(&pa->pa_inode_list,
 					&lg->lg_prealloc_list[order]);
-	rcu_read_unlock();
+	spin_unlock(&lg->lg_prealloc_lock);
 
 	/* Now trim the list to be not more than 8 elements */
 	if (lg_prealloc_count > 8) {
 		ext4_mb_discard_lg_preallocations(sb, lg,
-						order, lg_prealloc_count);
+						  order, lg_prealloc_count);
 		return;
 	}
 	return ;

[ 26/46] ext4: fix xattr block allocation/release with bigalloc

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lukas Czerner <lczerner@redhat.com>

commit 1231b3a1eb5740192aeebf5344dd6d6da000febf upstream.

Currently when new xattr block is created or released we we would call
dquot_free_block() or dquot_alloc_block() respectively, among the else
decrementing or incrementing the number of blocks assigned to the
inode by one block.

This however does not work for bigalloc file system because we always
allocate/free the whole cluster so we have to count with that in
dquot_free_block() and dquot_alloc_block() as well.

Use the clusters-to-blocks conversion EXT4_C2B() when passing number of
blocks to the dquot_alloc/free functions to fix the problem.

The problem has been revealed by xfstests #117 (and possibly others).

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/xattr.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -495,7 +495,7 @@ ext4_xattr_release_block(handle_t *handl
 		error = ext4_handle_dirty_metadata(handle, inode, bh);
 		if (IS_SYNC(inode))
 			ext4_handle_sync(handle);
-		dquot_free_block(inode, 1);
+		dquot_free_block(inode, EXT4_C2B(EXT4_SB(inode->i_sb), 1));
 		ea_bdebug(bh, "refcount now=%d; releasing",
 			  le32_to_cpu(BHDR(bh)->h_refcount));
 	}
@@ -784,7 +784,8 @@ inserted:
 			else {
 				/* The old block is released after updating
 				   the inode. */
-				error = dquot_alloc_block(inode, 1);
+				error = dquot_alloc_block(inode,
+						EXT4_C2B(EXT4_SB(sb), 1));
 				if (error)
 					goto cleanup;
 				error = ext4_journal_get_write_access(handle,
@@ -880,7 +881,7 @@ cleanup:
 	return error;
 
 cleanup_dquot:
-	dquot_free_block(inode, 1);
+	dquot_free_block(inode, EXT4_C2B(EXT4_SB(sb), 1));
 	goto cleanup;
 
 bad_block:

[ 27/46] ext4: fix free clusters calculation in bigalloc filesystem

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lukas Czerner <lczerner@redhat.com>

commit 304e220f0879198b1f5309ad6f0be862b4009491 upstream.

ext4_has_free_clusters() should tell us whether there is enough free
clusters to allocate, however number of free clusters in the file system
is converted to blocks using EXT4_C2B() which is not only wrong use of
the macro (we should have used EXT4_NUM_B2C) but it's also completely
wrong concept since everything else is in cluster units.

Moreover when calculating number of root clusters we should be using
macro EXT4_NUM_B2C() instead of EXT4_B2C() otherwise the result might be
off by one. However r_blocks_count should always be a multiple of the
cluster ratio so doing a plain bit shift should be enough here. We
avoid using EXT4_B2C() because it's confusing.

As a result of the first problem number of free clusters is much bigger
than it should have been and ext4_has_free_clusters() would return 1 even
if there is really not enough free clusters available.

Fix this by removing the EXT4_C2B() conversion of free clusters and
using bit shift when calculating number of root clusters. This bug
affects number of xfstests tests covering file system ENOSPC situation
handling. With this patch most of the ENOSPC problems with bigalloc file
system disappear, especially the errors caused by delayed allocation not
having enough space when the actual allocation is finally requested.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ext4/balloc.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -449,11 +449,16 @@ static int ext4_has_free_clusters(struct
 
 	free_clusters  = percpu_counter_read_positive(fcc);
 	dirty_clusters = percpu_counter_read_positive(dcc);
-	root_clusters = EXT4_B2C(sbi, ext4_r_blocks_count(sbi->s_es));
+
+	/*
+	 * r_blocks_count should always be multiple of the cluster ratio so
+	 * we are safe to do a plane bit shift only.
+	 */
+	root_clusters = ext4_r_blocks_count(sbi->s_es) >> sbi->s_cluster_bits;
 
 	if (free_clusters - (nclusters + root_clusters + dirty_clusters) <
 					EXT4_FREECLUSTERS_WATERMARK) {
-		free_clusters  = EXT4_C2B(sbi, percpu_counter_sum_positive(fcc));
+		free_clusters  = percpu_counter_sum_positive(fcc);
 		dirty_clusters = percpu_counter_sum_positive(dcc);
 	}
 	/* Check whether we have space after accounting for current

[ 28/46] nfsd: Fix memleak

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: majianpeng <majianpeng@gmail.com>

commit 2d32b29a1c2830f7c42caa8258c714acd983961f upstream.

When free nfs-client, it must free the ->cl_stateids.

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfsd/nfs4state.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -1053,6 +1053,8 @@ free_client(struct nfs4_client *clp)
 		put_group_info(clp->cl_cred.cr_group_info);
 	kfree(clp->cl_principal);
 	kfree(clp->cl_name.data);
+	idr_remove_all(&clp->cl_stateids);
+	idr_destroy(&clp->cl_stateids);
 	kfree(clp);
 }
 

[ 29/46] svcrpc: make svc_age_temp_xprts enqueue under sv_lock

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "J. Bruce Fields" <bfields@redhat.com>

commit e75bafbff2270993926abcc31358361db74a9bc2 upstream.

svc_age_temp_xprts expires xprts in a two-step process: first it takes
the sv_lock and moves the xprts to expire off their server-wide list
(sv_tempsocks or sv_permsocks) to a local list.  Then it drops the
sv_lock and enqueues and puts each one.

I see no reason for this: svc_xprt_enqueue() will take sp_lock, but the
sv_lock and sp_lock are not otherwise nested anywhere (and documentation
at the top of this file claims it's correct to nest these with sp_lock
inside.)

Tested-by: Jason Tibbitts <tibbs@math.uh.edu>
Tested-by: Paweł Sikora <pawel.sikora@agmk.net>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/sunrpc/svc_xprt.c |   15 ++-------------
 1 file changed, 2 insertions(+), 13 deletions(-)

--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -817,7 +817,6 @@ static void svc_age_temp_xprts(unsigned
 	struct svc_serv *serv = (struct svc_serv *)closure;
 	struct svc_xprt *xprt;
 	struct list_head *le, *next;
-	LIST_HEAD(to_be_aged);
 
 	dprintk("svc_age_temp_xprts\n");
 
@@ -838,25 +837,15 @@ static void svc_age_temp_xprts(unsigned
 		if (atomic_read(&xprt->xpt_ref.refcount) > 1 ||
 		    test_bit(XPT_BUSY, &xprt->xpt_flags))
 			continue;
-		svc_xprt_get(xprt);
-		list_move(le, &to_be_aged);
+		list_del_init(le);
 		set_bit(XPT_CLOSE, &xprt->xpt_flags);
 		set_bit(XPT_DETACHED, &xprt->xpt_flags);
-	}
-	spin_unlock_bh(&serv->sv_lock);
-
-	while (!list_empty(&to_be_aged)) {
-		le = to_be_aged.next;
-		/* fiddling the xpt_list node is safe 'cos we're XPT_DETACHED */
-		list_del_init(le);
-		xprt = list_entry(le, struct svc_xprt, xpt_list);
-
 		dprintk("queuing xprt %p for closing\n", xprt);
 
 		/* a thread will dequeue and close it soon */
 		svc_xprt_enqueue(xprt);
-		svc_xprt_put(xprt);
 	}
+	spin_unlock_bh(&serv->sv_lock);
 
 	mod_timer(&serv->sv_temptimer, jiffies + svc_conn_age_period * HZ);
 }

[ 30/46] vhost: fix length for cross region descriptor

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Michael S. Tsirkin" <mst@redhat.com>

commit bd97120fc3d1a11f3124c7c9ba1d91f51829eb85 upstream.

If a single descriptor crosses a region, the
second chunk length should be decremented
by size translated so far, instead it includes
the full descriptor length.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/vhost/vhost.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/vhost/vhost.c
+++ b/drivers/vhost/vhost.c
@@ -1074,7 +1074,7 @@ static int translate_desc(struct vhost_d
 		}
 		_iov = iov + ret;
 		size = reg->memory_size - addr + reg->guest_phys_addr;
-		_iov->iov_len = min((u64)len, size);
+		_iov->iov_len = min((u64)len - s, size);
 		_iov->iov_base = (void __user *)(unsigned long)
 			(reg->userspace_addr + addr - reg->guest_phys_addr);
 		s += size;

[ 31/46] fuse: dont WARN when nlink is zero

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Miklos Szeredi <mszeredi@suse.cz>

commit dfca7cebc2679f3d129f8e680a8f199a7ad16e38 upstream.

drop_nlink() warns if nlink is already zero.  This is triggerable by a buggy
userspace filesystem.  The cure, I think, is worse than the disease so disable
the warning.

Reported-by: Tero Roponen <tero.roponen@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/fuse/dir.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -645,7 +645,14 @@ static int fuse_unlink(struct inode *dir
 
 		spin_lock(&fc->lock);
 		fi->attr_version = ++fc->attr_version;
-		drop_nlink(inode);
+		/*
+		 * If i_nlink == 0 then unlink doesn't make sense, yet this can
+		 * happen if userspace filesystem is careless.  It would be
+		 * difficult to enforce correct nlink usage so just ignore this
+		 * condition here
+		 */
+		if (inode->i_nlink > 0)
+			drop_nlink(inode);
 		spin_unlock(&fc->lock);
 		fuse_invalidate_attr(inode);
 		fuse_invalidate_attr(dir);

[ 32/46] unbreak automounter support on 64-bit kernel with 32-bit userspace (v2)

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Helge Deller <deller@gmx.de>

commit 4f4ffc3a5398ef9bdbb32db04756d7d34e356fcf upstream.

automount-support is broken on the parisc architecture, because the existing
#if list does not include a check for defined(__hppa__). The HPPA (parisc)
architecture is similiar to other 64bit Linux targets where we have to define
autofs_wqt_t (which is passed back and forth to user space) as int type which
has a size of 32bit across 32 and 64bit kernels.

During the discussion on the mailing list, H. Peter Anvin suggested to invert
the #if list since only specific platforms (specifically those who do not have
a 32bit userspace, like IA64 and Alpha) should have autofs_wqt_t as unsigned
long type.

This suggestion is probably the best way to go, since Arm64 (and maybe others?)
seems to have a non-working automounter. So in the long run even for other new
upcoming architectures this inverted check seem to be the best solution, since
it will not require them to change this #if again (unless they are 64bit only).

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Acked-by: Ian Kent <raven@themaw.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
CC: James Bottomley <James.Bottomley@HansenPartnership.com>
CC: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/auto_fs.h |   25 ++++++++-----------------
 1 file changed, 8 insertions(+), 17 deletions(-)

--- a/include/linux/auto_fs.h
+++ b/include/linux/auto_fs.h
@@ -31,25 +31,16 @@
 #define AUTOFS_MIN_PROTO_VERSION	AUTOFS_PROTO_VERSION
 
 /*
- * Architectures where both 32- and 64-bit binaries can be executed
- * on 64-bit kernels need this.  This keeps the structure format
- * uniform, and makes sure the wait_queue_token isn't too big to be
- * passed back down to the kernel.
- *
- * This assumes that on these architectures:
- * mode     32 bit    64 bit
- * -------------------------
- * int      32 bit    32 bit
- * long     32 bit    64 bit
- *
- * If so, 32-bit user-space code should be backwards compatible.
+ * The wait_queue_token (autofs_wqt_t) is part of a structure which is passed
+ * back to the kernel via ioctl from userspace. On architectures where 32- and
+ * 64-bit userspace binaries can be executed it's important that the size of
+ * autofs_wqt_t stays constant between 32- and 64-bit Linux kernels so that we
+ * do not break the binary ABI interface by changing the structure size.
  */
-
-#if defined(__sparc__) || defined(__mips__) || defined(__x86_64__) \
- || defined(__powerpc__) || defined(__s390__)
-typedef unsigned int autofs_wqt_t;
-#else
+#if defined(__ia64__) || defined(__alpha__) /* pure 64bit architectures */
 typedef unsigned long autofs_wqt_t;
+#else
+typedef unsigned int autofs_wqt_t;
 #endif
 
 /* Packet types */

[ 33/46] ath9k_hw: fix calibration issues on chainmask that dont include chain 0

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felix Fietkau <nbd@openwrt.org>

commit 4a8f199508d79ff8a7d1e22f47b912baaf225336 upstream.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: CAI Qian <caiqian@redhat.com>
Reviewed-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/ath/ath9k/ar9003_calib.c |    2 ++
 drivers/net/wireless/ath/ath9k/ar9003_phy.c   |    2 +-
 drivers/net/wireless/ath/ath9k/hw.h           |    1 +
 3 files changed, 4 insertions(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -938,6 +938,8 @@ static bool ar9003_hw_init_cal(struct at
 					  AR_PHY_CL_TAB_1,
 					  AR_PHY_CL_TAB_2 };
 
+	ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);
+
 	if (rtt) {
 		if (!ar9003_hw_rtt_restore(ah, chan))
 			run_rtt_cal = true;
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -543,7 +543,7 @@ static void ar9003_hw_init_bb(struct ath
 	udelay(synthDelay + BASE_ACTIVATE_DELAY);
 }
 
-static void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
+void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx)
 {
 	switch (rx) {
 	case 0x5:
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -1014,6 +1014,7 @@ int ar9003_paprd_setup_gain_table(struct
 int ar9003_paprd_init_table(struct ath_hw *ah);
 bool ar9003_paprd_is_done(struct ath_hw *ah);
 void ar9003_hw_set_paprd_txdesc(struct ath_hw *ah, void *ds, u8 chains);
+void ar9003_hw_set_chain_masks(struct ath_hw *ah, u8 rx, u8 tx);
 
 /* Hardware family op attach helpers */
 void ar5008_hw_attach_phy_ops(struct ath_hw *ah);

[ 34/46] pstore: Avoid deadlock in panic and emergency-restart path

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seiji Aguchi <seiji.aguchi@hds.com>

commit 9f244e9cfd70c7c0f82d3c92ce772ab2a92d9f64 upstream.

[Issue]

When pstore is in panic and emergency-restart paths, it may be blocked
in those paths because it simply takes spin_lock.

This is an example scenario which pstore may hang up in a panic path:

 - cpuA grabs psinfo->buf_lock
 - cpuB panics and calls smp_send_stop
 - smp_send_stop sends IRQ to cpuA
 - after 1 second, cpuB gives up on cpuA and sends an NMI instead
 - cpuA is now in an NMI handler while still holding buf_lock
 - cpuB is deadlocked

This case may happen if a firmware has a bug and
cpuA is stuck talking with it more than one second.

Also, this is a similar scenario in an emergency-restart path:

 - cpuA grabs psinfo->buf_lock and stucks in a firmware
 - cpuB kicks emergency-restart via either sysrq-b or hangcheck timer.
   And then, cpuB is deadlocked by taking psinfo->buf_lock again.

[Solution]

This patch avoids the deadlocking issues in both panic and emergency_restart
paths by introducing a function, is_non_blocking_path(), to check if a cpu
can be blocked in current path.

With this patch, pstore is not blocked even if another cpu has
taken a spin_lock, in those paths by changing from spin_lock_irqsave
to spin_trylock_irqsave.

In addition, according to a comment of emergency_restart() in kernel/sys.c,
spin_lock shouldn't be taken in an emergency_restart path to avoid
deadlock. This patch fits the comment below.

<snip>
/**
 *      emergency_restart - reboot the system
 *
 *      Without shutting down any hardware or taking any locks
 *      reboot the system.  This is called when we know we are in
 *      trouble so this is our best effort to reboot.  This is
 *      safe to call in interrupt context.
 */
void emergency_restart(void)
<snip>

Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Cc: CAI Qian <caiqian@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/pstore/platform.c   |   35 +++++++++++++++++++++++++++++------
 include/linux/pstore.h |    6 ++++++
 2 files changed, 35 insertions(+), 6 deletions(-)

--- a/fs/pstore/platform.c
+++ b/fs/pstore/platform.c
@@ -88,6 +88,27 @@ static const char *get_reason_str(enum k
 	}
 }
 
+bool pstore_cannot_block_path(enum kmsg_dump_reason reason)
+{
+	/*
+	 * In case of NMI path, pstore shouldn't be blocked
+	 * regardless of reason.
+	 */
+	if (in_nmi())
+		return true;
+
+	switch (reason) {
+	/* In panic case, other cpus are stopped by smp_send_stop(). */
+	case KMSG_DUMP_PANIC:
+	/* Emergency restart shouldn't be blocked by spin lock. */
+	case KMSG_DUMP_EMERG:
+		return true;
+	default:
+		return false;
+	}
+}
+EXPORT_SYMBOL_GPL(pstore_cannot_block_path);
+
 /*
  * callback from kmsg_dump. (s2,l2) has the most recently
  * written bytes, older bytes are in (s1,l1). Save as much
@@ -111,10 +132,12 @@ static void pstore_dump(struct kmsg_dump
 
 	why = get_reason_str(reason);
 
-	if (in_nmi()) {
-		is_locked = spin_trylock(&psinfo->buf_lock);
-		if (!is_locked)
-			pr_err("pstore dump routine blocked in NMI, may corrupt error record\n");
+	if (pstore_cannot_block_path(reason)) {
+		is_locked = spin_trylock_irqsave(&psinfo->buf_lock, flags);
+		if (!is_locked) {
+			pr_err("pstore dump routine blocked in %s path, may corrupt error record\n"
+				       , in_nmi() ? "NMI" : why);
+		}
 	} else
 		spin_lock_irqsave(&psinfo->buf_lock, flags);
 	oopscount++;
@@ -145,9 +168,9 @@ static void pstore_dump(struct kmsg_dump
 		total += l1_cpy + l2_cpy;
 		part++;
 	}
-	if (in_nmi()) {
+	if (pstore_cannot_block_path(reason)) {
 		if (is_locked)
-			spin_unlock(&psinfo->buf_lock);
+			spin_unlock_irqrestore(&psinfo->buf_lock, flags);
 	} else
 		spin_unlock_irqrestore(&psinfo->buf_lock, flags);
 }
--- a/include/linux/pstore.h
+++ b/include/linux/pstore.h
@@ -54,12 +54,18 @@ struct pstore_info {
 
 #ifdef CONFIG_PSTORE
 extern int pstore_register(struct pstore_info *);
+extern bool pstore_cannot_block_path(enum kmsg_dump_reason reason);
 #else
 static inline int
 pstore_register(struct pstore_info *psi)
 {
 	return -ENODEV;
 }
+static inline bool
+pstore_cannot_block_path(enum kmsg_dump_reason reason)
+{
+	return false;
+}
 #endif
 
 #endif /*_LINUX_PSTORE_H*/

[ 35/46] cpuset: fix cpuset_print_task_mems_allowed() vs rename() race

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Li Zefan <lizefan@huawei.com>

commit 63f43f55c9bbc14f76b582644019b8a07dc8219a upstream.

rename() will change dentry->d_name. The result of this race can
be worse than seeing partially rewritten name, but we might access
a stale pointer because rename() will re-allocate memory to hold
a longer name.

It's safe in the protection of dentry->d_lock.

v2: check NULL dentry before acquiring dentry lock.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cpuset.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -2479,8 +2479,16 @@ void cpuset_print_task_mems_allowed(stru
 
 	dentry = task_cs(tsk)->css.cgroup->dentry;
 	spin_lock(&cpuset_buffer_lock);
-	snprintf(cpuset_name, CPUSET_NAME_LEN,
-		 dentry ? (const char *)dentry->d_name.name : "/");
+
+	if (!dentry) {
+		strcpy(cpuset_name, "/");
+	} else {
+		spin_lock(&dentry->d_lock);
+		strlcpy(cpuset_name, (const char *)dentry->d_name.name,
+			CPUSET_NAME_LEN);
+		spin_unlock(&dentry->d_lock);
+	}
+
 	nodelist_scnprintf(cpuset_nodelist, CPUSET_NODELIST_LEN,
 			   tsk->mems_allowed);
 	printk(KERN_INFO "%s cpuset=%s mems_allowed=%s\n",

[ 36/46] cgroup: fix exit() vs rmdir() race

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Li Zefan <lizefan@huawei.com>

commit 71b5707e119653039e6e95213f00479668c79b75 upstream.

In cgroup_exit() put_css_set_taskexit() is called without any lock,
which might lead to accessing a freed cgroup:

thread1                           thread2
---------------------------------------------
exit()
  cgroup_exit()
    put_css_set_taskexit()
      atomic_dec(cgrp->count);
                                   rmdir();
      /* not safe !! */
      check_for_release(cgrp);

rcu_read_lock() can be used to make sure the cgroup is alive.

Signed-off-by: Li Zefan <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/cgroup.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -378,12 +378,20 @@ static void __put_css_set(struct css_set
 		struct cgroup *cgrp = link->cgrp;
 		list_del(&link->cg_link_list);
 		list_del(&link->cgrp_link_list);
+
+		/*
+		 * We may not be holding cgroup_mutex, and if cgrp->count is
+		 * dropped to 0 the cgroup can be destroyed at any time, hence
+		 * rcu_read_lock is used to keep it alive.
+		 */
+		rcu_read_lock();
 		if (atomic_dec_and_test(&cgrp->count) &&
 		    notify_on_release(cgrp)) {
 			if (taskexit)
 				set_bit(CGRP_RELEASABLE, &cgrp->flags);
 			check_for_release(cgrp);
 		}
+		rcu_read_unlock();
 
 		kfree(link);
 	}

[ 37/46] ab8500-chargalg: Only root should have write permission on sysfs file

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lee Jones <lee.jones@linaro.org>

commit e3455002d04276c256a531f7175dce0f7d1cb78a upstream.

Only root should have write permission on sysfs file ab8500_chargalg/chargalg.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/abx500_chargalg.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -1698,7 +1698,7 @@ static ssize_t abx500_chargalg_sysfs_cha
 static struct attribute abx500_chargalg_en_charger = \
 {
 	.name = "chargalg",
-	.mode = S_IWUGO,
+	.mode = S_IWUSR,
 };
 
 static struct attribute *abx500_chargalg_chg[] = {

[ 38/46] ab8500_btemp: Demote initcall sequence

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rajanikanth H.V" <rajanikanth.hv@stericsson.com>

commit eeb0751c99522a4d1bbcc7b6bc1460cd07d07488 upstream.

Power supply subsystem creates thermal zone device for the property
'POWER_SUPPLY_PROP_TEMP' which requires thermal subsystem to be ready
before 'ab8500 battery temperature monitor' driver is initialized. ab8500
btemp driver is initialized with subsys_initcall whereas thermal subsystem
is initialized with fs_initcall which causes
thermal_zone_device_register(...) to crash since the required structure
'thermal_class' is not initialized yet:

Unable to handle kernel NULL pointer dereference at virtual address 000000a4
pgd = c0004000
[000000a4] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 0    Tainted: G        W     (3.8.0-rc4-00001-g632fda8-dirty #1)
PC is at _raw_spin_lock+0x18/0x54
LR is at get_device_parent+0x50/0x1b8
pc : [<c02f1dd0>]    lr : [<c01cb248>]    psr: 60000013
sp : ef04bdc8  ip : 00000000  fp : c0446180
r10: ef216e38  r9 : c03af5d0  r8 : ef275c18
r7 : 00000000  r6 : c0476c14  r5 : ef275c18  r4 : ef095840
r3 : ef04a000  r2 : 00000001  r1 : 00000000  r0 : 000000a4
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 10c5787d  Table: 0000404a  DAC: 00000015
Process swapper/0 (pid: 1, stack limit = 0xef04a238)
Stack: (0xef04bdc8 to 0xef04c000)
[...]
[<c02f1dd0>] (_raw_spin_lock+0x18/0x54) from [<c01cb248>] (get_device_parent+0x50/0x1b8)
[<c01cb248>] (get_device_parent+0x50/0x1b8) from [<c01cb8d8>] (device_add+0xa4/0x574)
[<c01cb8d8>] (device_add+0xa4/0x574) from [<c020b91c>] (thermal_zone_device_register+0x118/0x938)
[<c020b91c>] (thermal_zone_device_register+0x118/0x938) from [<c0202030>] (power_supply_register+0x170/0x1f8)
[<c0202030>] (power_supply_register+0x170/0x1f8) from [<c02055ec>] (ab8500_btemp_probe+0x208/0x47c)
[<c02055ec>] (ab8500_btemp_probe+0x208/0x47c) from [<c01cf0dc>] (platform_drv_probe+0x14/0x18)
[<c01cf0dc>] (platform_drv_probe+0x14/0x18) from [<c01cde70>] (driver_probe_device+0x74/0x20c)
[<c01cde70>] (driver_probe_device+0x74/0x20c) from [<c01ce094>] (__driver_attach+0x8c/0x90)
[<c01ce094>] (__driver_attach+0x8c/0x90) from [<c01cc640>] (bus_for_each_dev+0x4c/0x80)
[<c01cc640>] (bus_for_each_dev+0x4c/0x80) from [<c01cd6b4>] (bus_add_driver+0x16c/0x23c)
[<c01cd6b4>] (bus_add_driver+0x16c/0x23c) from [<c01ce54c>] (driver_register+0x78/0x14c)
[<c01ce54c>] (driver_register+0x78/0x14c) from [<c00086ac>] (do_one_initcall+0xfc/0x164)
[<c00086ac>] (do_one_initcall+0xfc/0x164) from [<c02e89c8>] (kernel_init+0x120/0x2b8)
[<c02e89c8>] (kernel_init+0x120/0x2b8) from [<c000e358>] (ret_from_fork+0x14/0x3c)
Code: e3c3303f e5932004 e2822001 e5832004 (e1903f9f)
---[ end trace ed9df72941b5bada ]---

Signed-off-by: Rajanikanth H.V <rajanikanth.hv@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/power/ab8500_btemp.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -1115,7 +1115,7 @@ static void __exit ab8500_btemp_exit(voi
 	platform_driver_unregister(&ab8500_btemp_driver);
 }
 
-subsys_initcall_sync(ab8500_btemp_init);
+device_initcall(ab8500_btemp_init);
 module_exit(ab8500_btemp_exit);
 
 MODULE_LICENSE("GPL v2");

[ 39/46] ACPI: Add DMI entry for Sony VGN-FW41E_H

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joseph Salisbury <joseph.salisbury@canonical.com>

commit 66f2fda93b67fa744d406e6dcf443f67bac204b6 upstream.

This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume
properly.

References: http://bugs.launchpad.net/bugs/1113547
Signed-off-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/sleep.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -186,6 +186,14 @@ static struct dmi_system_id __initdata a
 	},
 	{
 	.callback = init_nvs_nosave,
+	.ident = "Sony Vaio VGN-FW41E_H",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
+		},
+	},
+	{
+	.callback = init_nvs_nosave,
 	.ident = "Sony Vaio VGN-FW21E",
 	.matches = {
 		DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),

[ 40/46] staging: comedi: ni_labpc: correct differential channel sequence for AI commands

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

Commit 4c4bc25d0fa6beaf054c0b4c3b324487f266c820 upstream.

Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings.  He tracked it down to two
problems, one of which is addressed by this patch.

It seems the setting of the channel bits for particular scanning modes
was incorrect for differential mode.  (Only half the number of channels
are available in differential mode; comedi refers to them as channels 0,
1, 2 and 3, but the hardware documentation refers to them as channels 0,
2, 4 and 6.)  In differential mode, the setting of the channel enable
bits in the command1 register should depend on whether the scan enable
bit is set.  Effectively, we need to double the comedi channel number
when the scan enable bit is not set in differential mode.  The scan
enable bit gets set when the AI scan mode is `MODE_MULT_CHAN_UP` or
`MODE_MULT_CHAN_DOWN`, and gets cleared when the AI scan mode is
`MODE_SINGLE_CHAN` or `MODE_SINGLE_CHAN_INTERVAL`.  The existing test
for whether the comedi channel number needs to be doubled in
differential mode is incorrect in `labpc_ai_cmd()`.  This patch corrects
the test.

Thanks to Tuomas for suggesting the fix.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/ni_labpc.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -1264,7 +1264,9 @@ static int labpc_ai_cmd(struct comedi_de
 	else
 		channel = CR_CHAN(cmd->chanlist[0]);
 	/* munge channel bits for differential / scan disabled mode */
-	if (labpc_ai_scan_mode(cmd) != MODE_SINGLE_CHAN && aref == AREF_DIFF)
+	if ((labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN ||
+	     labpc_ai_scan_mode(cmd) == MODE_SINGLE_CHAN_INTERVAL) &&
+	    aref == AREF_DIFF)
 		channel *= 2;
 	devpriv->command1_bits |= ADC_CHAN_BITS(channel);
 	devpriv->command1_bits |= thisboard->ai_range_code[range];

[ 41/46] staging: comedi: ni_labpc: set up command4 register *after* command3

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

Commit 22056e2b46246d97ff0f7c6e21a77b8daa07f02c upstream.

Tuomas <tvainikk _at_ gmail _dot_ com> reported problems getting
meaningful output from a Lab-PC+ in differential mode for AI cmds, but
AI insn reads gave correct readings.  He tracked it down to two
problems, one of which is addressed by this patch.

It seems that writing to the command3 register after writing to the
command4 register in `labpc_ai_cmd()` messes up the differential
reference bit setting in the command4 register.  Set up the command4
register after the command3 register (as in `labpc_ai_rinsn()`) to avoid
the problem.

Thanks to Tuomas for suggesting the fix.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/drivers/ni_labpc.c |   31 +++++++++++++++---------------
 1 file changed, 16 insertions(+), 15 deletions(-)

--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -1282,21 +1282,6 @@ static int labpc_ai_cmd(struct comedi_de
 		devpriv->write_byte(devpriv->command1_bits,
 				    dev->iobase + COMMAND1_REG);
 	}
-	/*  setup any external triggering/pacing (command4 register) */
-	devpriv->command4_bits = 0;
-	if (cmd->convert_src != TRIG_EXT)
-		devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
-	/* XXX should discard first scan when using interval scanning
-	 * since manual says it is not synced with scan clock */
-	if (labpc_use_continuous_mode(cmd) == 0) {
-		devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
-		if (cmd->scan_begin_src == TRIG_EXT)
-			devpriv->command4_bits |= EXT_SCAN_EN_BIT;
-	}
-	/*  single-ended/differential */
-	if (aref == AREF_DIFF)
-		devpriv->command4_bits |= ADC_DIFF_BIT;
-	devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
 
 	devpriv->write_byte(cmd->chanlist_len,
 			    dev->iobase + INTERVAL_COUNT_REG);
@@ -1376,6 +1361,22 @@ static int labpc_ai_cmd(struct comedi_de
 		devpriv->command3_bits &= ~ADC_FNE_INTR_EN_BIT;
 	devpriv->write_byte(devpriv->command3_bits, dev->iobase + COMMAND3_REG);
 
+	/*  setup any external triggering/pacing (command4 register) */
+	devpriv->command4_bits = 0;
+	if (cmd->convert_src != TRIG_EXT)
+		devpriv->command4_bits |= EXT_CONVERT_DISABLE_BIT;
+	/* XXX should discard first scan when using interval scanning
+	 * since manual says it is not synced with scan clock */
+	if (labpc_use_continuous_mode(cmd) == 0) {
+		devpriv->command4_bits |= INTERVAL_SCAN_EN_BIT;
+		if (cmd->scan_begin_src == TRIG_EXT)
+			devpriv->command4_bits |= EXT_SCAN_EN_BIT;
+	}
+	/*  single-ended/differential */
+	if (aref == AREF_DIFF)
+		devpriv->command4_bits |= ADC_DIFF_BIT;
+	devpriv->write_byte(devpriv->command4_bits, dev->iobase + COMMAND4_REG);
+
 	/*  startup acquisition */
 
 	/*  command2 reg */

[ 42/46] staging: comedi: check s->async for poll(), read() and write()

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ian Abbott <abbotti@mev.co.uk>

commit cc400e185c07c15a42d2635995f422de5b94b696 upstream.

Some low-level comedi drivers (incorrectly) point `dev->read_subdev` or
`dev->write_subdev` to a subdevice that does not support asynchronous
commands.  Comedi's poll(), read() and write() file operation handlers
assume these subdevices do support asynchronous commands.  In
particular, they assume `s->async` is valid (where `s` points to the
read or write subdevice), which it won't be if it has been set
incorrectly.  This can lead to a NULL pointer dereference.

Check `s->async` is non-NULL in `comedi_poll()`, `comedi_read()` and
`comedi_write()` to avoid the bug.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/staging/comedi/comedi_fops.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/staging/comedi/comedi_fops.c
+++ b/drivers/staging/comedi/comedi_fops.c
@@ -1577,7 +1577,7 @@ static unsigned int comedi_poll(struct f
 
 	mask = 0;
 	read_subdev = comedi_get_read_subdevice(dev_file_info);
-	if (read_subdev) {
+	if (read_subdev && read_subdev->async) {
 		poll_wait(file, &read_subdev->async->wait_head, wait);
 		if (!read_subdev->busy
 		    || comedi_buf_read_n_available(read_subdev->async) > 0
@@ -1587,7 +1587,7 @@ static unsigned int comedi_poll(struct f
 		}
 	}
 	write_subdev = comedi_get_write_subdevice(dev_file_info);
-	if (write_subdev) {
+	if (write_subdev && write_subdev->async) {
 		poll_wait(file, &write_subdev->async->wait_head, wait);
 		comedi_buf_write_alloc(write_subdev->async,
 				       write_subdev->async->prealloc_bufsz);
@@ -1629,7 +1629,7 @@ static ssize_t comedi_write(struct file
 	}
 
 	s = comedi_get_write_subdevice(dev_file_info);
-	if (s == NULL) {
+	if (s == NULL || s->async == NULL) {
 		retval = -EIO;
 		goto done;
 	}
@@ -1740,7 +1740,7 @@ static ssize_t comedi_read(struct file *
 	}
 
 	s = comedi_get_read_subdevice(dev_file_info);
-	if (s == NULL) {
+	if (s == NULL || s->async == NULL) {
 		retval = -EIO;
 		goto done;
 	}

[ 43/46] perf tools: Fix build with bison 2.3 and older.

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vinson Lee <vlee@twitter.com>

commit 85df3b3769222894e9692b383c7af124b7721086 upstream.

The %name-prefix "prefix" syntax is not available on bison 2.3 and
older. Substitute with the -p "prefix" command-line option for
compatibility with older versions of bison.

This patch fixes this build error with older versions of bison.

    CC util/sysfs.o
    BISON util/pmu-bison.c
util/pmu.y:2.14-24: syntax error, unexpected string, expecting =
make: *** [util/pmu-bison.c] Error 1

Signed-off-by: Vinson Lee <vlee@twitter.com>
Tested-by: Li Zefan <lizefan@huawei.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1360792138-29186-1-git-send-email-vlee@twitter.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 tools/perf/Makefile            |    4 ++--
 tools/perf/util/parse-events.y |    1 -
 tools/perf/util/pmu.y          |    1 -
 3 files changed, 2 insertions(+), 4 deletions(-)

--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -241,13 +241,13 @@ $(OUTPUT)util/parse-events-flex.c: util/
 	$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/parse-events-flex.h -t util/parse-events.l > $(OUTPUT)util/parse-events-flex.c
 
 $(OUTPUT)util/parse-events-bison.c: util/parse-events.y
-	$(QUIET_BISON)$(BISON) -v util/parse-events.y -d -o $(OUTPUT)util/parse-events-bison.c
+	$(QUIET_BISON)$(BISON) -v util/parse-events.y -d -o $(OUTPUT)util/parse-events-bison.c -p parse_events_
 
 $(OUTPUT)util/pmu-flex.c: util/pmu.l
 	$(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/pmu-flex.h -t util/pmu.l > $(OUTPUT)util/pmu-flex.c
 
 $(OUTPUT)util/pmu-bison.c: util/pmu.y
-	$(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c
+	$(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c -p perf_pmu_
 
 $(OUTPUT)util/parse-events.o: $(OUTPUT)util/parse-events-flex.c $(OUTPUT)util/parse-events-bison.c
 $(OUTPUT)util/pmu.o: $(OUTPUT)util/pmu-flex.c $(OUTPUT)util/pmu-bison.c
--- a/tools/perf/util/parse-events.y
+++ b/tools/perf/util/parse-events.y
@@ -1,5 +1,4 @@
 
-%name-prefix "parse_events_"
 %parse-param {struct list_head *list_all}
 %parse-param {struct list_head *list_event}
 %parse-param {int *idx}
--- a/tools/perf/util/pmu.y
+++ b/tools/perf/util/pmu.y
@@ -1,5 +1,4 @@
 
-%name-prefix "perf_pmu_"
 %parse-param {struct list_head *format}
 %parse-param {char *name}
 

[ 44/46] ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Seth Heasley <seth.heasley@intel.com>

commit aaa515277db9585eeb4fdeb4637b9f9df50a1dd9 upstream.

This patch adds the IDE-mode SATA DeviceIDs for the Intel Avoton SOC.

Signed-off-by: Seth Heasley <seth.heasley@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ata_piix.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -331,6 +331,14 @@ static const struct pci_device_id piix_p
 	{ 0x8086, 0x8c09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (DH89xxCC) */
 	{ 0x8086, 0x2326, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Avoton) */
+	{ 0x8086, 0x1f20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+	/* SATA Controller IDE (Avoton) */
+	{ 0x8086, 0x1f21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+	/* SATA Controller IDE (Avoton) */
+	{ 0x8086, 0x1f30, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Avoton) */
+	{ 0x8086, 0x1f31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	{ }	/* terminate list */
 };
 

[ 45/46] ata_piix: Add Device IDs for Intel Wellsburg PCH

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Ralston <james.d.ralston@intel.com>

commit 3aee8bc52c415aba8148f144e5e5359b0fd75dd1 upstream.

This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH

Signed-off-by: James Ralston <james.d.ralston@intel.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ata_piix.c |    9 +++++++++
 1 file changed, 9 insertions(+)

--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -339,6 +339,15 @@ static const struct pci_device_id piix_p
 	{ 0x8086, 0x1f30, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
 	/* SATA Controller IDE (Avoton) */
 	{ 0x8086, 0x1f31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Wellsburg) */
+	{ 0x8086, 0x8d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+	/* SATA Controller IDE (Wellsburg) */
+	{ 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (Wellsburg) */
+	{ 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb },
+	/* SATA Controller IDE (Wellsburg) */
+	{ 0x8086, 0x8d68, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+
 	{ }	/* terminate list */
 };
 

[ 46/46] [hid] usb hid quirks for Masterkit MA901 usb radio

[Greg Kroah-Hartman]

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexey Klimov <klimov.linux@gmail.com>

commit 0322bd3980b3ebf7dde8474e22614cb443d6479a upstream.

Don't let Masterkit MA901 USB radio be handled by usb hid drivers.
This device will be handled by radio-ma901.c driver.

Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hid/hid-core.c |    1 +
 drivers/hid/hid-ids.h  |    3 +++
 2 files changed, 4 insertions(+)

--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1922,6 +1922,7 @@ static const struct hid_device_id hid_ig
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HYBRID) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_HEATCONTROL) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MADCATZ, USB_DEVICE_ID_MADCATZ_BEATPAD) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_MASTERKIT, USB_DEVICE_ID_MASTERKIT_MA901RADIO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1024LS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MCC, USB_DEVICE_ID_MCC_PMD1208LS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1) },
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -520,6 +520,9 @@
 #define USB_VENDOR_ID_MADCATZ		0x0738
 #define USB_DEVICE_ID_MADCATZ_BEATPAD	0x4540
 
+#define USB_VENDOR_ID_MASTERKIT			0x16c0
+#define USB_DEVICE_ID_MASTERKIT_MA901RADIO	0x05df
+
 #define USB_VENDOR_ID_MCC		0x09db
 #define USB_DEVICE_ID_MCC_PMD1024LS	0x0076
 #define USB_DEVICE_ID_MCC_PMD1208LS	0x007a

Re: [ 00/46] 3.4.35-stable review

[Shuah Khan]

On Fri, Mar 1, 2013 at 12:44 PM, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 3.4.35 release.
> There are 46 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Mar  3 19:44:00 UTC 2013.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.4.35-rc1.gz
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Patches applied cleanly to 3.0.67, 3.4.34, and 3.8.1

Compiled and booted on the following systems:

HP EliteBook 6930p Intel(R) Core(TM)2 Duo CPU T9400 @ 2.53GHz
HP ProBook 6475b AMD A10-4600M APU with Radeon(tm) HD Graphics

Special test this cycle:
HP ProLiant DL385p Gen8: Tested all three releases for the following
commit: iommu/amd: Initialize device table after dma_ops

dmesgs for all releases look good. No regressions compared to the previous
dmesgs for each of these releases.

Cross-compile tests results:

alpha: defconfig passed on all
arm: defconfig passed on all
arm64: not applicable to 3.0.y, 3.4.y. defconfig passed on 3.8.y
c6x: not applicable to 3.0.y, defconfig passed on 3.4.y, and 3.8.y.
mips: defconfig passed on all
mipsel: defconfig passed on all
powerpc: wii_defconfig passed on all
sh: defconfig passed on all
sparc: defconfig passed on all
tile: tilegx_defconfig passed on all

-- Shuah

Re: [ 00/46] 3.4.35-stable review

[Satoru Takeuchi]

At Fri,  1 Mar 2013 11:44:48 -0800,
Greg Kroah-Hartman wrote:
> 
> This is the start of the stable review cycle for the 3.4.35 release.
> There are 46 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Mar  3 19:44:00 UTC 2013.
> Anything received after that time might be too late.

This kernel can be built and boot without any problem.
Building a kernel with this kernel also works fine.

 - Build Machine: debian wheezy x86_64
   CPU: Intel(R) Core(TM) i5-2400 CPU @ 3.10GHz x 4
   memory: 8GB

 - Test machine: debian wheezy x86_64(KVM guest on the Build Machine)
   vCPU: x2
   memory: 2GB

Thanks,
Satoru