From: Vinod Koul <vinod.koul@intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.jf.intel.com>
Cc: linux-kernel@vger.kernel.org,
Viresh Kumar <viresh.kumar@linaro.org>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [PATCH 04/10] dmatest: move dmatest_channels and nr_channels to dmatest_info
Date: Tue, 5 Mar 2013 14:33:15 +0530 [thread overview]
Message-ID: <20130305090315.GC28136@intel.com> (raw)
In-Reply-To: <1362388174-3435-5-git-send-email-andriy.shevchenko@linux.intel.com>
On Mon, Mar 04, 2013 at 11:09:28AM +0200, Andy Shevchenko wrote:
> We don't need to have them global and later we would like to protect access to
> them as well.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> drivers/dma/dmatest.c | 29 ++++++++++++++++-------------
> 1 file changed, 16 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
> index 7f9e3cc..475a21a 100644
> --- a/drivers/dma/dmatest.c
> +++ b/drivers/dma/dmatest.c
> @@ -109,6 +109,7 @@ struct dmatest_chan {
> * @timeout: transfer timeout in msec, -1 for infinite timeout
> */
> struct dmatest_info {
> + /* Test parameters */
> unsigned int buf_size;
> char channel[20];
> char device[20];
> @@ -118,17 +119,14 @@ struct dmatest_info {
> unsigned int xor_sources;
> unsigned int pq_sources;
> int timeout;
> +
> + /* Internal state */
> + struct list_head channels;
> + unsigned int nr_channels;
> };
Ideally this should be folded into previous...
>
> static struct dmatest_info test_info;
>
> -/*
> - * These are protected by dma_list_mutex since they're only used by
> - * the DMA filter function callback
> - */
> -static LIST_HEAD(dmatest_channels);
> -static unsigned int nr_channels;
> -
> static bool dmatest_match_channel(struct dmatest_info *info,
> struct dma_chan *chan)
> {
> @@ -690,8 +688,8 @@ static int dmatest_add_channel(struct dmatest_info *info,
> pr_info("dmatest: Started %u threads using %s\n",
> thread_count, dma_chan_name(chan));
>
> - list_add_tail(&dtc->node, &dmatest_channels);
> - nr_channels++;
> + list_add_tail(&dtc->node, &info->channels);
> + info->nr_channels++;
>
> return 0;
> }
> @@ -725,7 +723,8 @@ static int run_threaded_test(struct dmatest_info *info)
> }
> } else
> break; /* no more channels available */
> - if (info->max_channels && nr_channels >= info->max_channels)
> + if (info->max_channels &&
> + info->nr_channels >= info->max_channels)
> break; /* we have all we need */
> }
> return err;
> @@ -736,14 +735,15 @@ static void stop_threaded_test(struct dmatest_info *info)
> struct dmatest_chan *dtc, *_dtc;
> struct dma_chan *chan;
>
> - list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) {
> + list_for_each_entry_safe(dtc, _dtc, &info->channels, node) {
> list_del(&dtc->node);
> chan = dtc->chan;
> dmatest_cleanup_channel(dtc);
> - pr_debug("dmatest: dropped channel %s\n",
> - dma_chan_name(chan));
> + pr_debug("dmatest: dropped channel %s\n", dma_chan_name(chan));
> dma_release_channel(chan);
> }
> +
> + info->nr_channels = 0;
> }
>
> static int __init dmatest_init(void)
> @@ -752,6 +752,9 @@ static int __init dmatest_init(void)
>
> memset(info, 0, sizeof(*info));
>
> + INIT_LIST_HEAD(&info->channels);
> +
> + /* Set default parameters */
> info->buf_size = test_buf_size;
> strlcpy(info->channel, test_channel, sizeof(info->channel));
> strlcpy(info->device, test_device, sizeof(info->device));
> --
> 1.8.2.rc0.22.gb3600c3
>
next prev parent reply other threads:[~2013-03-05 9:28 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-04 9:09 [PATCH 00/10] dmatest: update the module to use debugfs Andy Shevchenko
2013-03-04 9:09 ` [PATCH 01/10] dmatest: cancel thread immediately when asked for Andy Shevchenko
2013-03-05 1:41 ` Viresh Kumar
2013-03-04 9:09 ` [PATCH 02/10] dmatest: allocate memory for pq_coefs from heap Andy Shevchenko
2013-03-05 1:43 ` Viresh Kumar
2013-03-04 9:09 ` [PATCH 03/10] dmatest: create dmatest_info to keep test parameters Andy Shevchenko
2013-03-05 1:47 ` Viresh Kumar
2013-03-04 9:09 ` [PATCH 04/10] dmatest: move dmatest_channels and nr_channels to dmatest_info Andy Shevchenko
2013-03-05 9:03 ` Vinod Koul [this message]
2013-03-05 9:12 ` Viresh Kumar
2013-03-05 9:19 ` Andy Shevchenko
2013-03-04 9:09 ` [PATCH 05/10] dmatest: split test parameters to separate structure Andy Shevchenko
2013-03-05 9:16 ` Viresh Kumar
2013-03-08 13:07 ` Andy Shevchenko
2013-03-04 9:09 ` [PATCH 06/10] dmatest: run test via debugfs Andy Shevchenko
2013-03-05 9:26 ` Vinod Koul
2013-03-05 10:36 ` Andy Shevchenko
2013-03-05 10:35 ` Vinod Koul
[not found] ` <CAHp75Vc6KmPQYjSx5m+gEBCe4g2tRgEPKyg4hZx9ytk99pB7Qw@mail.gmail.com>
[not found] ` <20130307061143.GD13370@intel.com>
2013-03-07 8:37 ` Andy Shevchenko
2013-03-04 9:09 ` [PATCH 07/10] dmatest: return actual state in 'run' file Andy Shevchenko
2013-03-04 9:09 ` [PATCH 08/10] dmatest: define MAX_ERROR_COUNT constant Andy Shevchenko
2013-03-04 9:09 ` [PATCH 09/10] dmatest: gather test results in the linked list Andy Shevchenko
2013-11-05 19:58 ` Dan Williams
2013-11-06 14:13 ` Andy Shevchenko
2013-11-06 18:11 ` Dan Williams
2013-11-07 14:37 ` Andy Shevchenko
2013-03-04 9:09 ` [PATCH 10/10] dmatest: append verify result to results Andy Shevchenko
2013-03-07 6:20 ` [PATCH 00/10] dmatest: update the module to use debugfs Vinod Koul
2013-03-08 13:11 ` Andy Shevchenko
2013-03-10 13:44 ` Viresh Kumar
2013-03-11 8:12 ` Andy Shevchenko
2013-03-21 5:11 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130305090315.GC28136@intel.com \
--to=vinod.koul@intel.com \
--cc=akpm@linux-foundation.org \
--cc=andriy.shevchenko@linux.jf.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox