From: Vivek Goyal <vgoyal@redhat.com>
To: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>,
Yinghai Lu <yinghai@kernel.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@kernel.org>, WANG Chao <chaowang@redhat.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] x86, kdump: Set crashkernel_low automatically
Date: Mon, 11 Mar 2013 16:17:25 -0400 [thread overview]
Message-ID: <20130311201725.GD14738@redhat.com> (raw)
In-Reply-To: <513E37B0.6090709@zytor.com>
On Mon, Mar 11, 2013 at 12:59:44PM -0700, H. Peter Anvin wrote:
> On 03/11/2013 12:22 PM, Vivek Goyal wrote:
> >
> > So always reserving memory at highest address will break all the cases
> > which work without iommu and rely on swiotlb. I think first we need
> > to make sure that kdump works reliably with iommu on, and then try
> > to move to always reserving memory at higest possible address.
> >
>
> We should clearly always reserve an swiotlb window, *or*, probably much
> better, teach the kdump kernel to *make* an swiotlb window (by having a
> memory buffer in its reserved memory area into which it copies a chunk
> of low memory, just as we do for the bottom megabyte. If we are already
> in low memory that buffer becomes the swiotlb window, no copy necessary.)
This sounds like a good idea. It will require exporting how much memory
should be needed for swiotlb. And then kexec-tools should be able to
backup that memory area and make that memory available to second kernel.
Thanks
Vivek
next prev parent reply other threads:[~2013-03-11 20:17 UTC|newest]
Thread overview: 101+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-08 5:54 3.9-rc1: crash kernel panic - not syncing: Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer WANG Chao
2013-03-08 6:03 ` CAI Qian
2013-03-08 6:32 ` Yinghai Lu
2013-03-08 6:36 ` Yinghai Lu
2013-03-08 7:20 ` WANG Chao
2013-03-08 7:27 ` Yinghai Lu
2013-03-08 7:33 ` WANG Chao
2013-03-08 7:50 ` Yinghai Lu
2013-03-08 12:12 ` WANG Chao
2013-03-08 18:24 ` Yinghai Lu
2013-03-08 19:39 ` Yinghai Lu
2013-03-11 3:42 ` WANG Chao
2013-03-11 4:56 ` [PATCH] x86, kdump: Set crashkernel_low automatically Yinghai Lu
2013-03-11 14:48 ` Vivek Goyal
2013-03-11 15:02 ` Vivek Goyal
2013-03-11 17:58 ` Yinghai Lu
2013-03-11 18:26 ` Vivek Goyal
2013-03-11 18:44 ` Yinghai Lu
2013-03-11 18:46 ` H. Peter Anvin
2013-03-11 18:50 ` Yinghai Lu
2013-03-11 18:55 ` H. Peter Anvin
2013-03-11 19:06 ` Yinghai Lu
2013-03-11 19:06 ` H. Peter Anvin
2013-03-11 19:08 ` Yinghai Lu
2013-03-11 19:20 ` Vivek Goyal
2013-03-11 19:55 ` H. Peter Anvin
2013-03-11 20:12 ` Vivek Goyal
2013-03-11 20:19 ` H. Peter Anvin
2013-03-11 20:36 ` H. Peter Anvin
2013-03-11 20:38 ` Eric W. Biederman
2013-03-11 20:42 ` H. Peter Anvin
2013-03-11 21:10 ` Vivek Goyal
2013-03-11 21:13 ` H. Peter Anvin
2013-03-11 20:45 ` Vivek Goyal
2013-03-11 20:50 ` H. Peter Anvin
2013-03-11 21:03 ` Vivek Goyal
2013-03-11 21:06 ` H. Peter Anvin
2013-03-12 13:46 ` Vivek Goyal
2013-03-12 8:35 ` Ingo Molnar
2013-03-11 20:57 ` Yinghai Lu
2013-03-11 21:06 ` Vivek Goyal
2013-03-11 21:15 ` Yinghai Lu
2013-03-11 19:10 ` Vivek Goyal
2013-03-11 19:34 ` Yinghai Lu
2013-03-11 19:38 ` Vivek Goyal
2013-03-11 19:39 ` Yinghai Lu
2013-03-11 19:44 ` Vivek Goyal
2013-03-11 19:44 ` Yinghai Lu
2013-03-18 14:46 ` Vivek Goyal
2013-03-18 15:33 ` Vivek Goyal
2013-03-18 19:05 ` Yinghai Lu
2013-03-18 19:10 ` H. Peter Anvin
2013-03-18 20:00 ` Vivek Goyal
2013-03-18 21:14 ` H. Peter Anvin
2013-03-18 21:25 ` [PATCH v3] " Yinghai Lu
2013-03-18 22:52 ` H. Peter Anvin
2013-03-18 23:26 ` Yinghai Lu
2013-03-19 0:27 ` H. Peter Anvin
2013-03-19 1:04 ` [PATCH v4] " Yinghai Lu
2013-03-19 13:33 ` Vivek Goyal
2013-03-19 15:05 ` [PATCH v5] " Yinghai Lu
2013-03-20 13:08 ` Vivek Goyal
2013-03-20 15:53 ` Yinghai Lu
2013-03-20 16:03 ` Vivek Goyal
2013-03-20 16:21 ` Yinghai Lu
2013-03-20 16:31 ` Vivek Goyal
2013-03-20 19:22 ` [PATCH] kexec: use Crash kernel for Crash kernel low Yinghai Lu
2013-03-25 19:42 ` Vivek Goyal
2013-03-25 21:50 ` Yinghai Lu
2013-03-26 18:14 ` Vivek Goyal
2013-04-01 13:34 ` Vivek Goyal
2013-04-01 18:33 ` H. Peter Anvin
2013-04-01 19:26 ` Vivek Goyal
2013-04-01 20:47 ` H. Peter Anvin
2013-04-01 21:10 ` Yinghai Lu
2013-04-01 22:02 ` H. Peter Anvin
2013-04-01 22:17 ` Yinghai Lu
2013-04-01 22:20 ` H. Peter Anvin
2013-04-01 22:40 ` Yinghai Lu
2013-04-02 1:11 ` Yinghai Lu
2013-04-02 13:50 ` Vivek Goyal
2013-04-02 14:17 ` Vivek Goyal
2013-04-02 14:50 ` Yinghai Lu
2013-04-02 14:45 ` Yinghai Lu
2013-04-02 14:58 ` Vivek Goyal
2013-04-02 15:44 ` Yinghai Lu
2013-04-02 15:39 ` Vivek Goyal
2013-04-02 15:46 ` Yinghai Lu
2013-04-02 15:50 ` Vivek Goyal
2013-04-02 17:21 ` Yinghai Lu
2013-04-02 13:30 ` Vivek Goyal
2013-03-11 19:14 ` [PATCH] x86, kdump: Set crashkernel_low automatically Eric W. Biederman
2013-03-11 19:22 ` Vivek Goyal
2013-03-11 19:59 ` H. Peter Anvin
2013-03-11 20:17 ` Vivek Goyal [this message]
2013-03-11 19:56 ` H. Peter Anvin
2013-03-11 19:02 ` Vivek Goyal
2013-03-11 19:04 ` H. Peter Anvin
2013-03-11 19:17 ` Vivek Goyal
2013-03-11 13:14 ` 3.9-rc1: crash kernel panic - not syncing: Can not allocate SWIOTLB buffer earlier and can't now provide you with the DMA bounce buffer Konrad Rzeszutek Wilk
2013-03-08 7:52 ` Takao Indoh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130311201725.GD14738@redhat.com \
--to=vgoyal@redhat.com \
--cc=chaowang@redhat.com \
--cc=ebiederm@xmission.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=tglx@linutronix.de \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).