* [PATCH v7 1/9] mfd: Add commands abstraction layer for SI476X MFD
2013-02-27 6:06 [PATCH v7 0/9] Driver for Si476x series of chips Andrey Smirnov
@ 2013-02-27 6:06 ` Andrey Smirnov
2013-03-18 20:11 ` Mauro Carvalho Chehab
2013-02-27 6:06 ` [PATCH v7 2/9] mfd: Add the main bulk of core driver for SI476x code Andrey Smirnov
` (7 subsequent siblings)
8 siblings, 1 reply; 13+ messages in thread
From: Andrey Smirnov @ 2013-02-27 6:06 UTC (permalink / raw)
To: mchehab; +Cc: andrew.smirnov, hverkuil, sameo, sam, linux-media, linux-kernel
This patch adds all the functions used for exchanging commands with
the chip.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/mfd/si476x-cmd.c | 1553 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 1553 insertions(+)
create mode 100644 drivers/mfd/si476x-cmd.c
diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c
new file mode 100644
index 0000000..0ae1b63
--- /dev/null
+++ b/drivers/mfd/si476x-cmd.c
@@ -0,0 +1,1553 @@
+/*
+ * drivers/mfd/si476x-cmd.c -- Subroutines implementing command
+ * protocol of si476x series of chips
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/atomic.h>
+#include <linux/i2c.h>
+#include <linux/device.h>
+#include <linux/gpio.h>
+#include <linux/videodev2.h>
+
+#include <media/si476x.h>
+#include <linux/mfd/si476x-core.h>
+
+#define msb(x) ((u8)((u16) x >> 8))
+#define lsb(x) ((u8)((u16) x & 0x00FF))
+
+
+
+#define CMD_POWER_UP 0x01
+#define CMD_POWER_UP_A10_NRESP 1
+#define CMD_POWER_UP_A10_NARGS 5
+
+#define CMD_POWER_UP_A20_NRESP 1
+#define CMD_POWER_UP_A20_NARGS 5
+
+#define POWER_UP_DELAY_MS 110
+
+#define CMD_POWER_DOWN 0x11
+#define CMD_POWER_DOWN_A10_NRESP 1
+
+#define CMD_POWER_DOWN_A20_NRESP 1
+#define CMD_POWER_DOWN_A20_NARGS 1
+
+#define CMD_FUNC_INFO 0x12
+#define CMD_FUNC_INFO_NRESP 7
+
+#define CMD_SET_PROPERTY 0x13
+#define CMD_SET_PROPERTY_NARGS 5
+#define CMD_SET_PROPERTY_NRESP 1
+
+#define CMD_GET_PROPERTY 0x14
+#define CMD_GET_PROPERTY_NARGS 3
+#define CMD_GET_PROPERTY_NRESP 4
+
+#define CMD_AGC_STATUS 0x17
+#define CMD_AGC_STATUS_NRESP_A10 2
+#define CMD_AGC_STATUS_NRESP_A20 6
+
+#define PIN_CFG_BYTE(x) (0x7F & (x))
+#define CMD_DIG_AUDIO_PIN_CFG 0x18
+#define CMD_DIG_AUDIO_PIN_CFG_NARGS 4
+#define CMD_DIG_AUDIO_PIN_CFG_NRESP 5
+
+#define CMD_ZIF_PIN_CFG 0x19
+#define CMD_ZIF_PIN_CFG_NARGS 4
+#define CMD_ZIF_PIN_CFG_NRESP 5
+
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG 0x1A
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS 4
+#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP 5
+
+#define CMD_ANA_AUDIO_PIN_CFG 0x1B
+#define CMD_ANA_AUDIO_PIN_CFG_NARGS 1
+#define CMD_ANA_AUDIO_PIN_CFG_NRESP 2
+
+#define CMD_INTB_PIN_CFG 0x1C
+#define CMD_INTB_PIN_CFG_NARGS 2
+#define CMD_INTB_PIN_CFG_A10_NRESP 6
+#define CMD_INTB_PIN_CFG_A20_NRESP 3
+
+#define CMD_FM_TUNE_FREQ 0x30
+#define CMD_FM_TUNE_FREQ_A10_NARGS 5
+#define CMD_FM_TUNE_FREQ_A20_NARGS 3
+#define CMD_FM_TUNE_FREQ_NRESP 1
+
+#define CMD_FM_RSQ_STATUS 0x32
+
+#define CMD_FM_RSQ_STATUS_A10_NARGS 1
+#define CMD_FM_RSQ_STATUS_A10_NRESP 17
+#define CMD_FM_RSQ_STATUS_A30_NARGS 1
+#define CMD_FM_RSQ_STATUS_A30_NRESP 23
+
+
+#define CMD_FM_SEEK_START 0x31
+#define CMD_FM_SEEK_START_NARGS 1
+#define CMD_FM_SEEK_START_NRESP 1
+
+#define CMD_FM_RDS_STATUS 0x36
+#define CMD_FM_RDS_STATUS_NARGS 1
+#define CMD_FM_RDS_STATUS_NRESP 16
+
+#define CMD_FM_RDS_BLOCKCOUNT 0x37
+#define CMD_FM_RDS_BLOCKCOUNT_NARGS 1
+#define CMD_FM_RDS_BLOCKCOUNT_NRESP 8
+
+#define CMD_FM_PHASE_DIVERSITY 0x38
+#define CMD_FM_PHASE_DIVERSITY_NARGS 1
+#define CMD_FM_PHASE_DIVERSITY_NRESP 1
+
+#define CMD_FM_PHASE_DIV_STATUS 0x39
+#define CMD_FM_PHASE_DIV_STATUS_NRESP 2
+
+#define CMD_AM_TUNE_FREQ 0x40
+#define CMD_AM_TUNE_FREQ_NARGS 3
+#define CMD_AM_TUNE_FREQ_NRESP 1
+
+#define CMD_AM_RSQ_STATUS 0x42
+#define CMD_AM_RSQ_STATUS_NARGS 1
+#define CMD_AM_RSQ_STATUS_NRESP 13
+
+#define CMD_AM_SEEK_START 0x41
+#define CMD_AM_SEEK_START_NARGS 1
+#define CMD_AM_SEEK_START_NRESP 1
+
+
+#define CMD_AM_ACF_STATUS 0x45
+#define CMD_AM_ACF_STATUS_NRESP 6
+#define CMD_AM_ACF_STATUS_NARGS 1
+
+#define CMD_FM_ACF_STATUS 0x35
+#define CMD_FM_ACF_STATUS_NRESP 8
+#define CMD_FM_ACF_STATUS_NARGS 1
+
+#define CMD_MAX_ARGS_COUNT (10)
+
+
+enum si476x_acf_status_report_bits {
+ SI476X_ACF_BLEND_INT = (1 << 4),
+ SI476X_ACF_HIBLEND_INT = (1 << 3),
+ SI476X_ACF_HICUT_INT = (1 << 2),
+ SI476X_ACF_CHBW_INT = (1 << 1),
+ SI476X_ACF_SOFTMUTE_INT = (1 << 0),
+
+ SI476X_ACF_SMUTE = (1 << 0),
+ SI476X_ACF_SMATTN = 0b11111,
+ SI476X_ACF_PILOT = (1 << 7),
+ SI476X_ACF_STBLEND = ~SI476X_ACF_PILOT,
+};
+
+enum si476x_agc_status_report_bits {
+ SI476X_AGC_MXHI = (1 << 5),
+ SI476X_AGC_MXLO = (1 << 4),
+ SI476X_AGC_LNAHI = (1 << 3),
+ SI476X_AGC_LNALO = (1 << 2),
+};
+
+enum si476x_errors {
+ SI476X_ERR_BAD_COMMAND = 0x10,
+ SI476X_ERR_BAD_ARG1 = 0x11,
+ SI476X_ERR_BAD_ARG2 = 0x12,
+ SI476X_ERR_BAD_ARG3 = 0x13,
+ SI476X_ERR_BAD_ARG4 = 0x14,
+ SI476X_ERR_BUSY = 0x18,
+ SI476X_ERR_BAD_INTERNAL_MEMORY = 0x20,
+ SI476X_ERR_BAD_PATCH = 0x30,
+ SI476X_ERR_BAD_BOOT_MODE = 0x31,
+ SI476X_ERR_BAD_PROPERTY = 0x40,
+};
+
+
+int si476x_core_i2c_xfer(struct si476x_core *,
+ enum si476x_i2c_type,
+ char *, int);
+
+
+static int si476x_core_parse_and_nag_about_error(struct si476x_core *core)
+{
+ int err;
+ char *cause;
+ u8 buffer[2];
+
+ if (core->revision != SI476X_REVISION_A10) {
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV,
+ buffer, sizeof(buffer));
+ if (err == sizeof(buffer)) {
+ switch (buffer[1]) {
+ case SI476X_ERR_BAD_COMMAND:
+ cause = "Bad command";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG1:
+ cause = "Bad argument #1";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG2:
+ cause = "Bad argument #2";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG3:
+ cause = "Bad argument #3";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_ARG4:
+ cause = "Bad argument #4";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BUSY:
+ cause = "Chip is busy";
+ err = -EBUSY;
+ break;
+ case SI476X_ERR_BAD_INTERNAL_MEMORY:
+ cause = "Bad internal memory";
+ err = -EIO;
+ break;
+ case SI476X_ERR_BAD_PATCH:
+ cause = "Bad patch";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_BOOT_MODE:
+ cause = "Bad boot mode";
+ err = -EINVAL;
+ break;
+ case SI476X_ERR_BAD_PROPERTY:
+ cause = "Bad property";
+ err = -EINVAL;
+ break;
+ default:
+ cause = "Unknown";
+ err = -EIO;
+ }
+
+ dev_err(&core->client->dev,
+ "[Chip error status]: %s\n", cause);
+ } else {
+ dev_err(&core->client->dev,
+ "Failed to fetch error code\n");
+ err = (err >= 0) ? -EIO : err;
+ }
+ } else {
+ err = -EIO;
+ }
+
+ return err;
+}
+
+/**
+ * si476x_core_send_command() - sends a command to si476x and waits its
+ * response
+ * @core: si476x_device structure for the device we are
+ * communicating with
+ * @command: command id
+ * @args: command arguments we are sending
+ * @argn: actual size of @args
+ * @response: buffer to place the expected response from the device
+ * @respn: actual size of @response
+ * @usecs: amount of time to wait before reading the response (in
+ * usecs)
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+static int si476x_core_send_command(struct si476x_core *core,
+ const u8 command,
+ const u8 args[],
+ const int argn,
+ u8 resp[],
+ const int respn,
+ const int usecs)
+{
+ struct i2c_client *client = core->client;
+ int err;
+ u8 data[CMD_MAX_ARGS_COUNT + 1];
+
+ if (argn > CMD_MAX_ARGS_COUNT) {
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ if (!client->adapter) {
+ err = -ENODEV;
+ goto exit;
+ }
+
+ /* First send the command and its arguments */
+ data[0] = command;
+ memcpy(&data[1], args, argn);
+ dev_dbg(&client->dev, "Command:\n %*ph\n", argn + 1, data);
+
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_SEND, (char *) data, argn + 1);
+ if (err != argn + 1) {
+ dev_err(&core->client->dev,
+ "Error while sending command 0x%02x\n",
+ command);
+ err = (err >= 0) ? -EIO : err;
+ goto exit;
+ }
+ /* Set CTS to zero only after the command is send to avoid
+ * possible racing conditions when working in polling mode */
+ atomic_set(&core->cts, 0);
+
+ /* if (unlikely(command == CMD_POWER_DOWN) */
+ if (!wait_event_timeout(core->command,
+ atomic_read(&core->cts),
+ usecs_to_jiffies(usecs) + 1))
+ dev_warn(&core->client->dev,
+ "(%s) [CMD 0x%02x] Device took too much time to answer.\n",
+ __func__, command);
+
+ /*
+ When working in polling mode, for some reason the tuner will
+ report CTS bit as being set in the first status byte read,
+ but all the consequtive ones will return zeros until the
+ tuner is actually completed the POWER_UP command. To
+ workaround that we wait for second CTS to be reported
+ */
+ if (unlikely(!core->client->irq && command == CMD_POWER_UP)) {
+ if (!wait_event_timeout(core->command,
+ atomic_read(&core->cts),
+ usecs_to_jiffies(usecs) + 1))
+ dev_warn(&core->client->dev,
+ "(%s) Power up took too much time.\n",
+ __func__);
+ }
+
+ /* Then get the response */
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV, resp, respn);
+ if (err != respn) {
+ dev_err(&core->client->dev,
+ "Error while reading response for command 0x%02x\n",
+ command);
+ err = (err >= 0) ? -EIO : err;
+ goto exit;
+ }
+ dev_dbg(&client->dev, "Response:\n %*ph\n", respn, resp);
+
+ err = 0;
+
+ if (resp[0] & SI476X_ERR) {
+ dev_err(&core->client->dev, "[CMD 0x%02x] Chip set error flag\n", command);
+ err = si476x_core_parse_and_nag_about_error(core);
+ goto exit;
+ }
+
+ if (!(resp[0] & SI476X_CTS))
+ err = -EBUSY;
+exit:
+ return err;
+}
+
+static int si476x_cmd_clear_stc(struct si476x_core *core)
+{
+ int err;
+ struct si476x_rsq_status_args args = {
+ .primary = false,
+ .rsqack = false,
+ .attune = false,
+ .cancel = false,
+ .stcack = true,
+ };
+
+ switch(core->power_up_parameters.func) {
+ case SI476X_FUNC_FM_RECEIVER:
+ err = si476x_core_cmd_fm_rsq_status(core, &args, NULL);
+ break;
+ case SI476X_FUNC_AM_RECEIVER:
+ err = si476x_core_cmd_am_rsq_status(core, &args, NULL);
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+static int si476x_cmd_tune_seek_freq(struct si476x_core *core,
+ uint8_t cmd,
+ const uint8_t args[], size_t argn,
+ uint8_t *resp, size_t respn)
+{
+ int err;
+
+
+ atomic_set(&core->stc, 0);
+ err = si476x_core_send_command(core, cmd, args, argn, resp, respn,
+ SI476X_TIMEOUT_TUNE);
+ if (!err) {
+ wait_event_killable(core->tuning,
+ atomic_read(&core->stc));
+ si476x_cmd_clear_stc(core);
+ }
+
+ return err;
+}
+
+/**
+ * si476x_cmd_func_info() - send 'FUNC_INFO' command to the device
+ * @core: device to send the command to
+ * @info: struct si476x_func_info to fill all the information
+ * returned by the command
+ *
+ * The command requests the firmware and patch version for currently
+ * loaded firmware (dependent on the function of the device FM/AM/WB)
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+int si476x_core_cmd_func_info(struct si476x_core *core,
+ struct si476x_func_info *info)
+{
+ int err;
+ u8 resp[CMD_FUNC_INFO_NRESP];
+
+ err = si476x_core_send_command(core, CMD_FUNC_INFO,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+
+ info->firmware.major = resp[1];
+ info->firmware.minor[0] = resp[2];
+ info->firmware.minor[1] = resp[3];
+
+ info->patch_id = ((u16) resp[4] << 8) | resp[5];
+ info->func = resp[6];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_func_info);
+
+/**
+ * si476x_cmd_set_property() - send 'SET_PROPERTY' command to the device
+ * @core: device to send the command to
+ * @property: property address
+ * @value: property value
+ *
+ * Function returns 0 on succsess and negative error code on
+ * failure
+ */
+int si476x_core_cmd_set_property(struct si476x_core *core,
+ u16 property, u16 value)
+{
+ u8 resp[CMD_SET_PROPERTY_NRESP];
+ const u8 args[CMD_SET_PROPERTY_NARGS] = {
+ 0x00,
+ msb(property),
+ lsb(property),
+ msb(value),
+ lsb(value),
+ };
+
+ return si476x_core_send_command(core, CMD_SET_PROPERTY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_set_property);
+
+/**
+ * si476x_cmd_get_property() - send 'GET_PROPERTY' command to the device
+ * @core: device to send the command to
+ * @property: property address
+ *
+ * Function return the value of property as u16 on success or a
+ * negative error on failure
+ */
+int si476x_core_cmd_get_property(struct si476x_core *core, u16 property)
+{
+ int err;
+ u8 resp[CMD_GET_PROPERTY_NRESP];
+ const u8 args[CMD_GET_PROPERTY_NARGS] = {
+ 0x00,
+ msb(property),
+ lsb(property),
+ };
+
+ err = si476x_core_send_command(core, CMD_GET_PROPERTY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+ else
+ return be16_to_cpup((__be16 *)(resp + 2));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
+
+/**
+ * si476x_cmd_dig_audio_pin_cfg() - send 'DIG_AUDIO_PIN_CFG' command to
+ * the device
+ * @core: device to send the command to
+ * @dclk: DCLK pin function configuration:
+ * #SI476X_DCLK_NOOP - do not modify the behaviour
+ * #SI476X_DCLK_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * #SI476X_DCLK_DAUDIO - set the pin to be a part of digital
+ * audio interface
+ * @dfs: DFS pin function configuration:
+ * #SI476X_DFS_NOOP - do not modify the behaviour
+ * #SI476X_DFS_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_DFS_DAUDIO - set the pin to be a part of digital
+ * audio interface
+ * @dout - DOUT pin function configuration:
+ * SI476X_DOUT_NOOP - do not modify the behaviour
+ * SI476X_DOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_DOUT_I2S_OUTPUT - set this pin to be digital out on I2S
+ * port 1
+ * SI476X_DOUT_I2S_INPUT - set this pin to be digital in on I2S
+ * port 1
+ * @xout - XOUT pin function configuration:
+ * SI476X_XOUT_NOOP - do not modify the behaviour
+ * SI476X_XOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_XOUT_I2S_INPUT - set this pin to be digital in on I2S
+ * port 1
+ * SI476X_XOUT_MODE_SELECT - set this pin to be the input that
+ * selects the mode of the I2S audio
+ * combiner (analog or HD)
+ * [SI4761/63/65/67 Only]
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *core,
+ enum si476x_dclk_config dclk,
+ enum si476x_dfs_config dfs,
+ enum si476x_dout_config dout,
+ enum si476x_xout_config xout)
+{
+ u8 resp[CMD_DIG_AUDIO_PIN_CFG_NRESP];
+ const u8 args[CMD_DIG_AUDIO_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(dclk),
+ PIN_CFG_BYTE(dfs),
+ PIN_CFG_BYTE(dout),
+ PIN_CFG_BYTE(xout),
+ };
+
+ return si476x_core_send_command(core, CMD_DIG_AUDIO_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg);
+
+/**
+ * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND'
+ * @core - device to send the command to
+ * @iqclk - IQCL pin function configuration:
+ * SI476X_IQCLK_NOOP - do not modify the behaviour
+ * SI476X_IQCLK_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_IQCLK_IQ - set pin to be a part of I/Q interace
+ * in master mode
+ * @iqfs - IQFS pin function configuration:
+ * SI476X_IQFS_NOOP - do not modify the behaviour
+ * SI476X_IQFS_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_IQFS_IQ - set pin to be a part of I/Q interace
+ * in master mode
+ * @iout - IOUT pin function configuration:
+ * SI476X_IOUT_NOOP - do not modify the behaviour
+ * SI476X_IOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_IOUT_OUTPUT - set pin to be I out
+ * @qout - QOUT pin function configuration:
+ * SI476X_QOUT_NOOP - do not modify the behaviour
+ * SI476X_QOUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_QOUT_OUTPUT - set pin to be Q out
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_zif_pin_cfg(struct si476x_core *core,
+ enum si476x_iqclk_config iqclk,
+ enum si476x_iqfs_config iqfs,
+ enum si476x_iout_config iout,
+ enum si476x_qout_config qout)
+{
+ u8 resp[CMD_ZIF_PIN_CFG_NRESP];
+ const u8 args[CMD_ZIF_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(iqclk),
+ PIN_CFG_BYTE(iqfs),
+ PIN_CFG_BYTE(iout),
+ PIN_CFG_BYTE(qout),
+ };
+
+ return si476x_core_send_command(core, CMD_ZIF_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg);
+
+/**
+ * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send
+ * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device
+ * @core - device to send the command to
+ * @icin - ICIN pin function configuration:
+ * SI476X_ICIN_NOOP - do not modify the behaviour
+ * SI476X_ICIN_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICIN_GPO1_HIGH - set pin to be an output, drive it high
+ * SI476X_ICIN_GPO1_LOW - set pin to be an output, drive it low
+ * SI476X_ICIN_IC_LINK - set the pin to be a part of Inter-Chip link
+ * @icip - ICIP pin function configuration:
+ * SI476X_ICIP_NOOP - do not modify the behaviour
+ * SI476X_ICIP_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICIP_GPO1_HIGH - set pin to be an output, drive it high
+ * SI476X_ICIP_GPO1_LOW - set pin to be an output, drive it low
+ * SI476X_ICIP_IC_LINK - set the pin to be a part of Inter-Chip link
+ * @icon - ICON pin function configuration:
+ * SI476X_ICON_NOOP - do not modify the behaviour
+ * SI476X_ICON_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICON_I2S - set the pin to be a part of audio
+ * interface in slave mode (DCLK)
+ * SI476X_ICON_IC_LINK - set the pin to be a part of Inter-Chip link
+ * @icop - ICOP pin function configuration:
+ * SI476X_ICOP_NOOP - do not modify the behaviour
+ * SI476X_ICOP_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_ICOP_I2S - set the pin to be a part of audio
+ * interface in slave mode (DOUT)
+ * [Si4761/63/65/67 Only]
+ * SI476X_ICOP_IC_LINK - set the pin to be a part of Inter-Chip link
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *core,
+ enum si476x_icin_config icin,
+ enum si476x_icip_config icip,
+ enum si476x_icon_config icon,
+ enum si476x_icop_config icop)
+{
+ u8 resp[CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP];
+ const u8 args[CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(icin),
+ PIN_CFG_BYTE(icip),
+ PIN_CFG_BYTE(icon),
+ PIN_CFG_BYTE(icop),
+ };
+
+ return si476x_core_send_command(core, CMD_IC_LINK_GPO_CTL_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_ic_link_gpo_ctl_pin_cfg);
+
+/**
+ * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the
+ * device
+ * @core - device to send the command to
+ * @lrout - LROUT pin function configuration:
+ * SI476X_LROUT_NOOP - do not modify the behaviour
+ * SI476X_LROUT_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_LROUT_AUDIO - set pin to be audio output
+ * SI476X_LROUT_MPX - set pin to be MPX output
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *core,
+ enum si476x_lrout_config lrout)
+{
+ u8 resp[CMD_ANA_AUDIO_PIN_CFG_NRESP];
+ const u8 args[CMD_ANA_AUDIO_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(lrout),
+ };
+
+ return si476x_core_send_command(core, CMD_ANA_AUDIO_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_ana_audio_pin_cfg);
+
+
+/**
+ * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device
+ * @core - device to send the command to
+ * @intb - INTB pin function configuration:
+ * SI476X_INTB_NOOP - do not modify the behaviour
+ * SI476X_INTB_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_INTB_DAUDIO - set pin to be a part of digital
+ * audio interface in slave mode
+ * SI476X_INTB_IRQ - set pin to be an interrupt request line
+ * @a1 - A1 pin function configuration:
+ * SI476X_A1_NOOP - do not modify the behaviour
+ * SI476X_A1_TRISTATE - put the pin in tristate condition,
+ * enable 1MOhm pulldown
+ * SI476X_A1_IRQ - set pin to be an interrupt request line
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+static int si476x_core_cmd_intb_pin_cfg_a10(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1)
+{
+ u8 resp[CMD_INTB_PIN_CFG_A10_NRESP];
+ const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(intb),
+ PIN_CFG_BYTE(a1),
+ };
+
+ return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_intb_pin_cfg_a20(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1)
+{
+ u8 resp[CMD_INTB_PIN_CFG_A20_NRESP];
+ const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
+ PIN_CFG_BYTE(intb),
+ PIN_CFG_BYTE(a1),
+ };
+
+ return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+
+
+/**
+ * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the
+ * device
+ * @core - device to send the command to
+ * @rsqack - if set command clears RSQINT, SNRINT, SNRLINT, RSSIHINT,
+ * RSSSILINT, BLENDINT, MULTHINT and MULTLINT
+ * @attune - when set the values in the status report are the values
+ * that were calculated at tune
+ * @cancel - abort ongoing seek/tune opertation
+ * @stcack - clear the STCINT bin in status register
+ * @report - all signal quality information retured by the command
+ * (if NULL then the output of the command is ignored)
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_am_rsq_status(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AM_RSQ_STATUS_NRESP];
+ const u8 args[CMD_AM_RSQ_STATUS_NARGS] = {
+ rsqargs->rsqack << 3 | rsqargs->attune << 2 |
+ rsqargs->cancel << 1 | rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_AM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (!report)
+ return err;
+
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_rsq_status);
+
+int si476x_core_cmd_fm_acf_status(struct si476x_core *core,
+ struct si476x_acf_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_ACF_STATUS_NRESP];
+ const u8 args[CMD_FM_ACF_STATUS_NARGS] = {
+ 0x0,
+ };
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_FM_ACF_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->blend_int = resp[1] & SI476X_ACF_BLEND_INT;
+ report->hblend_int = resp[1] & SI476X_ACF_HIBLEND_INT;
+ report->hicut_int = resp[1] & SI476X_ACF_HICUT_INT;
+ report->chbw_int = resp[1] & SI476X_ACF_CHBW_INT;
+ report->softmute_int = resp[1] & SI476X_ACF_SOFTMUTE_INT;
+ report->smute = resp[2] & SI476X_ACF_SMUTE;
+ report->smattn = resp[3] & SI476X_ACF_SMATTN;
+ report->chbw = resp[4];
+ report->hicut = resp[5];
+ report->hiblend = resp[6];
+ report->pilot = resp[7] & SI476X_ACF_PILOT;
+ report->stblend = resp[7] & SI476X_ACF_STBLEND;
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_acf_status);
+
+int si476x_core_cmd_am_acf_status(struct si476x_core *core,
+ struct si476x_acf_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AM_ACF_STATUS_NRESP];
+ const u8 args[CMD_AM_ACF_STATUS_NARGS] = {
+ 0x0,
+ };
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_AM_ACF_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->blend_int = resp[1] & SI476X_ACF_BLEND_INT;
+ report->hblend_int = resp[1] & SI476X_ACF_HIBLEND_INT;
+ report->hicut_int = resp[1] & SI476X_ACF_HICUT_INT;
+ report->chbw_int = resp[1] & SI476X_ACF_CHBW_INT;
+ report->softmute_int = resp[1] & SI476X_ACF_SOFTMUTE_INT;
+ report->smute = resp[2] & SI476X_ACF_SMUTE;
+ report->smattn = resp[3] & SI476X_ACF_SMATTN;
+ report->chbw = resp[4];
+ report->hicut = resp[5];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_acf_status);
+
+
+/**
+ * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the
+ * device
+ * @core - device to send the command to
+ * @seekup - if set the direction of the search is 'up'
+ * @wrap - if set seek wraps when hitting band limit
+ *
+ * This function begins search for a valid station. The station is
+ * considered valid when 'FM_VALID_SNR_THRESHOLD' and
+ * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
+ * are met.
+} *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_fm_seek_start(struct si476x_core *core,
+ bool seekup, bool wrap)
+{
+ u8 resp[CMD_FM_SEEK_START_NRESP];
+ const u8 args[CMD_FM_SEEK_START_NARGS] = {
+ seekup << 3 | wrap << 2,
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_FM_SEEK_START,
+ args, sizeof(args), resp, sizeof(resp));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_seek_start);
+
+/**
+ * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the
+ * device
+ * @core - device to send the command to
+ * @status_only - if set the data is not removed from RDSFIFO,
+ * RDSFIFOUSED is not decremented and data in all the
+ * rest RDS data contains the last valid info received
+ * @mtfifo if set the command clears RDS receive FIFO
+ * @intack if set the command clards the RDSINT bit.
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_fm_rds_status(struct si476x_core *core,
+ bool status_only,
+ bool mtfifo,
+ bool intack,
+ struct si476x_rds_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RDS_STATUS_NRESP];
+ const u8 args[CMD_FM_RDS_STATUS_NARGS] = {
+ status_only << 2 | mtfifo << 1 | intack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RDS_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting RDS status information this command can be
+ * used to just acknowledge different interrupt flags in those
+ * cases it is useless to copy and parse received data so user
+ * can pass NULL, and thus avoid unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->rdstpptyint = 0b00010000 & resp[1];
+ report->rdspiint = 0b00001000 & resp[1];
+ report->rdssyncint = 0b00000010 & resp[1];
+ report->rdsfifoint = 0b00000001 & resp[1];
+
+ report->tpptyvalid = 0b00010000 & resp[2];
+ report->pivalid = 0b00001000 & resp[2];
+ report->rdssync = 0b00000010 & resp[2];
+ report->rdsfifolost = 0b00000001 & resp[2];
+
+ report->tp = 0b00100000 & resp[3];
+ report->pty = 0b00011111 & resp[3];
+
+ report->pi = be16_to_cpup((__be16 *)(resp + 4));
+ report->rdsfifoused = resp[6];
+
+ report->ble[V4L2_RDS_BLOCK_A] = 0b11000000 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_B] = 0b00110000 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_C] = 0b00001100 & resp[7];
+ report->ble[V4L2_RDS_BLOCK_D] = 0b00000011 & resp[7];
+
+ report->rds[V4L2_RDS_BLOCK_A].block = V4L2_RDS_BLOCK_A;
+ report->rds[V4L2_RDS_BLOCK_A].msb = resp[8];
+ report->rds[V4L2_RDS_BLOCK_A].lsb = resp[9];
+
+ report->rds[V4L2_RDS_BLOCK_B].block = V4L2_RDS_BLOCK_B;
+ report->rds[V4L2_RDS_BLOCK_B].msb = resp[10];
+ report->rds[V4L2_RDS_BLOCK_B].lsb = resp[11];
+
+ report->rds[V4L2_RDS_BLOCK_C].block = V4L2_RDS_BLOCK_C;
+ report->rds[V4L2_RDS_BLOCK_C].msb = resp[12];
+ report->rds[V4L2_RDS_BLOCK_C].lsb = resp[13];
+
+ report->rds[V4L2_RDS_BLOCK_D].block = V4L2_RDS_BLOCK_D;
+ report->rds[V4L2_RDS_BLOCK_D].msb = resp[14];
+ report->rds[V4L2_RDS_BLOCK_D].lsb = resp[15];
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_status);
+
+int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *core,
+ bool clear,
+ struct si476x_rds_blockcount_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RDS_BLOCKCOUNT_NRESP];
+ const u8 args[CMD_FM_RDS_BLOCKCOUNT_NARGS] = {
+ clear,
+ };
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_FM_RDS_BLOCKCOUNT,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+
+ if (!err) {
+ report->expected = be16_to_cpup((__be16 *)(resp + 2));
+ report->received = be16_to_cpup((__be16 *)(resp + 4));
+ report->uncorrectable = be16_to_cpup((__be16 *)(resp + 6));
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_blockcount);
+
+int si476x_core_cmd_fm_phase_diversity(struct si476x_core *core,
+ enum si476x_phase_diversity_mode mode)
+{
+ u8 resp[CMD_FM_PHASE_DIVERSITY_NRESP];
+ const u8 args[CMD_FM_PHASE_DIVERSITY_NARGS] = {
+ mode & 0b111,
+ };
+
+ return si476x_core_send_command(core, CMD_FM_PHASE_DIVERSITY,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_diversity);
+/**
+ * si476x_core_cmd_fm_phase_div_status() - get the phase diversity
+ * status
+ *
+ * @core: si476x device
+ *
+ * NOTE caller must hold core lock
+ *
+ * Function returns the value of the status bit in case of success and
+ * negative error code in case of failre.
+ */
+int si476x_core_cmd_fm_phase_div_status(struct si476x_core *core)
+{
+ int err;
+ u8 resp[CMD_FM_PHASE_DIV_STATUS_NRESP];
+
+ err = si476x_core_send_command(core, CMD_FM_PHASE_DIV_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+
+ return (err < 0) ? err : resp[1];
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_div_status);
+
+
+/**
+ * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the
+ * device
+ * @core - device to send the command to
+ * @seekup - if set the direction of the search is 'up'
+ * @wrap - if set seek wraps when hitting band limit
+ *
+ * This function begins search for a valid station. The station is
+ * considered valid when 'FM_VALID_SNR_THRESHOLD' and
+ * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
+ * are met.
+ *
+ * Function returns 0 on success and negative error code on failure
+ */
+int si476x_core_cmd_am_seek_start(struct si476x_core *core,
+ bool seekup, bool wrap)
+{
+ u8 resp[CMD_AM_SEEK_START_NRESP];
+ const u8 args[CMD_AM_SEEK_START_NARGS] = {
+ seekup << 3 | wrap << 2,
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_AM_SEEK_START,
+ args, sizeof(args), resp, sizeof(resp));
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_seek_start);
+
+
+
+static int si476x_core_cmd_power_up_a10(struct si476x_core *core,
+ struct si476x_power_up_args *puargs)
+{
+ u8 resp[CMD_POWER_UP_A10_NRESP];
+ const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
+ const bool ctsen = (core->client->irq != 0);
+ const u8 args[CMD_POWER_UP_A10_NARGS] = {
+ 0xF7, /* Reserved, always 0xF7 */
+ 0x3F & puargs->xcload, /* First two bits are reserved to be
+ * zeros */
+ ctsen << 7 | intsel << 6 | 0x07, /* Last five bits
+ * are reserved to
+ * be written as 0x7 */
+ puargs->func << 4 | puargs->freq,
+ 0x11, /* Reserved, always 0x11 */
+ };
+
+ return si476x_core_send_command(core, CMD_POWER_UP,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_TIMEOUT_POWER_UP);
+}
+
+static int si476x_core_cmd_power_up_a20(struct si476x_core *core,
+ struct si476x_power_up_args *puargs)
+{
+ u8 resp[CMD_POWER_UP_A20_NRESP];
+ const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
+ const bool ctsen = (core->client->irq != 0);
+ const u8 args[CMD_POWER_UP_A20_NARGS] = {
+ puargs->ibias6x << 7 | puargs->xstart,
+ 0x3F & puargs->xcload, /* First two bits are reserved to be
+ * zeros */
+ ctsen << 7 | intsel << 6 | puargs->fastboot << 5 |
+ puargs->xbiashc << 3 | puargs->xbias,
+ puargs->func << 4 | puargs->freq,
+ 0x10 | puargs->xmode,
+ };
+
+ return si476x_core_send_command(core, CMD_POWER_UP,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_TIMEOUT_POWER_UP);
+}
+
+static int si476x_core_cmd_power_down_a10(struct si476x_core *core,
+ struct si476x_power_down_args *pdargs)
+{
+ u8 resp[CMD_POWER_DOWN_A10_NRESP];
+
+ return si476x_core_send_command(core, CMD_POWER_DOWN,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_power_down_a20(struct si476x_core *core,
+ struct si476x_power_down_args *pdargs)
+{
+ u8 resp[CMD_POWER_DOWN_A20_NRESP];
+ const u8 args[CMD_POWER_DOWN_A20_NARGS] = {
+ pdargs->xosc,
+ };
+ return si476x_core_send_command(core, CMD_POWER_DOWN,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+}
+
+static int si476x_core_cmd_am_tune_freq_a10(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+
+ const int am_freq = tuneargs->freq;
+ u8 resp[CMD_AM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
+ (tuneargs->hd << 6),
+ msb(am_freq),
+ lsb(am_freq),
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ, args,
+ sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_am_tune_freq_a20(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+ const int am_freq = tuneargs->freq;
+ u8 resp[CMD_AM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
+ (tuneargs->zifsr << 6) | (tuneargs->injside & 0b11),
+ msb(am_freq),
+ lsb(am_freq),
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ, args, sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RSQ_STATUS_A10_NRESP];
+ const u8 args[CMD_FM_RSQ_STATUS_A10_NARGS] = {
+ rsqargs->rsqack << 3 | rsqargs->attune << 2 |
+ rsqargs->cancel << 1 | rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->multhint = 0b10000000 & resp[1];
+ report->multlint = 0b01000000 & resp[1];
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+ report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->assi = resp[15];
+ report->usn = resp[16];
+
+ return err;
+}
+
+static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RSQ_STATUS_A10_NRESP];
+ const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
+ rsqargs->primary << 4 | rsqargs->rsqack << 3 |
+ rsqargs->attune << 2 | rsqargs->cancel << 1 |
+ rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->multhint = 0b10000000 & resp[1];
+ report->multlint = 0b01000000 & resp[1];
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+ report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->assi = resp[15];
+ report->usn = resp[16];
+
+ return err;
+}
+
+
+static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core,
+ struct si476x_rsq_status_args *rsqargs,
+ struct si476x_rsq_status_report *report)
+{
+ int err;
+ u8 resp[CMD_FM_RSQ_STATUS_A30_NRESP];
+ const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
+ rsqargs->primary << 4 | rsqargs->rsqack << 3 |
+ rsqargs->attune << 2 | rsqargs->cancel << 1 |
+ rsqargs->stcack,
+ };
+
+ err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
+ args, ARRAY_SIZE(args),
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ /*
+ * Besides getting received signal quality information this
+ * command can be used to just acknowledge different interrupt
+ * flags in those cases it is useless to copy and parse
+ * received data so user can pass NULL, and thus avoid
+ * unnecessary copying.
+ */
+ if (err < 0 || report == NULL)
+ return err;
+
+ report->multhint = 0b10000000 & resp[1];
+ report->multlint = 0b01000000 & resp[1];
+ report->snrhint = 0b00001000 & resp[1];
+ report->snrlint = 0b00000100 & resp[1];
+ report->rssihint = 0b00000010 & resp[1];
+ report->rssilint = 0b00000001 & resp[1];
+
+ report->bltf = 0b10000000 & resp[2];
+ report->snr_ready = 0b00100000 & resp[2];
+ report->rssiready = 0b00001000 & resp[2];
+ report->injside = 0b00000100 & resp[2];
+ report->afcrl = 0b00000010 & resp[2];
+ report->valid = 0b00000001 & resp[2];
+
+ report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
+ report->freqoff = resp[5];
+ report->rssi = resp[6];
+ report->snr = resp[7];
+ report->issi = resp[8];
+ report->lassi = resp[9];
+ report->hassi = resp[10];
+ report->mult = resp[11];
+ report->dev = resp[12];
+ report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
+ report->assi = resp[15];
+ report->usn = resp[16];
+
+ report->pilotdev = resp[17];
+ report->rdsdev = resp[18];
+ report->assidev = resp[19];
+ report->strongdev = resp[20];
+ report->rdspi = be16_to_cpup((__be16 *)(resp + 21));
+
+ return err;
+}
+
+static int si476x_core_cmd_fm_tune_freq_a10(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+ u8 resp[CMD_FM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_FM_TUNE_FREQ_A10_NARGS] = {
+ (tuneargs->hd << 6) | (tuneargs->tunemode << 4)
+ | (tuneargs->smoothmetrics << 2),
+ msb(tuneargs->freq),
+ lsb(tuneargs->freq),
+ msb(tuneargs->antcap),
+ lsb(tuneargs->antcap)
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ, args, sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_fm_tune_freq_a20(struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs)
+{
+ u8 resp[CMD_FM_TUNE_FREQ_NRESP];
+ const u8 args[CMD_FM_TUNE_FREQ_A20_NARGS] = {
+ (tuneargs->hd << 6) | (tuneargs->tunemode << 4)
+ | (tuneargs->smoothmetrics << 2) | (tuneargs->injside),
+ msb(tuneargs->freq),
+ lsb(tuneargs->freq),
+ };
+
+ return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ, args, sizeof(args),
+ resp, sizeof(resp));
+}
+
+static int si476x_core_cmd_agc_status_a20(struct si476x_core *core,
+ struct si476x_agc_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AGC_STATUS_NRESP_A20];
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_AGC_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->mxhi = resp[1] & SI476X_AGC_MXHI;
+ report->mxlo = resp[1] & SI476X_AGC_MXLO;
+ report->lnahi = resp[1] & SI476X_AGC_LNAHI;
+ report->lnalo = resp[1] & SI476X_AGC_LNALO;
+ report->fmagc1 = resp[2];
+ report->fmagc2 = resp[3];
+ report->pgagain = resp[4];
+ report->fmwblang = resp[5];
+
+ return err;
+}
+
+static int si476x_core_cmd_agc_status_a10(struct si476x_core *core,
+ struct si476x_agc_status_report *report)
+{
+ int err;
+ u8 resp[CMD_AGC_STATUS_NRESP_A10];
+
+ if (!report)
+ return -EINVAL;
+
+ err = si476x_core_send_command(core, CMD_AGC_STATUS,
+ NULL, 0,
+ resp, ARRAY_SIZE(resp),
+ SI476X_DEFAULT_TIMEOUT);
+ if (err < 0)
+ return err;
+
+ report->mxhi = resp[1] & SI476X_AGC_MXHI;
+ report->mxlo = resp[1] & SI476X_AGC_MXLO;
+ report->lnahi = resp[1] & SI476X_AGC_LNAHI;
+ report->lnalo = resp[1] & SI476X_AGC_LNALO;
+
+ return err;
+}
+
+typedef int (*tune_freq_func_t) (struct si476x_core *core,
+ struct si476x_tune_freq_args *tuneargs);
+
+static struct {
+ int (*power_up) (struct si476x_core *,
+ struct si476x_power_up_args *);
+ int (*power_down) (struct si476x_core *,
+ struct si476x_power_down_args *);
+
+ tune_freq_func_t fm_tune_freq;
+ tune_freq_func_t am_tune_freq;
+
+ int (*fm_rsq_status)(struct si476x_core *,
+ struct si476x_rsq_status_args *,
+ struct si476x_rsq_status_report *);
+
+ int (*agc_status)(struct si476x_core *,
+ struct si476x_agc_status_report *);
+ int (*intb_pin_cfg)(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1);
+} si476x_cmds_vtable[] = {
+ [SI476X_REVISION_A10] = {
+ .power_up = si476x_core_cmd_power_up_a10,
+ .power_down = si476x_core_cmd_power_down_a10,
+ .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a10,
+ .am_tune_freq = si476x_core_cmd_am_tune_freq_a10,
+ .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a10,
+ .agc_status = si476x_core_cmd_agc_status_a10,
+ .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a10,
+ },
+ [SI476X_REVISION_A20] = {
+ .power_up = si476x_core_cmd_power_up_a20,
+ .power_down = si476x_core_cmd_power_down_a20,
+ .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a20,
+ .am_tune_freq = si476x_core_cmd_am_tune_freq_a20,
+ .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a20,
+ .agc_status = si476x_core_cmd_agc_status_a20,
+ .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a20,
+ },
+ [SI476X_REVISION_A30] = {
+ .power_up = si476x_core_cmd_power_up_a20,
+ .power_down = si476x_core_cmd_power_down_a20,
+ .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a20,
+ .am_tune_freq = si476x_core_cmd_am_tune_freq_a20,
+ .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a30,
+ .agc_status = si476x_core_cmd_agc_status_a20,
+ .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a20,
+ },
+};
+
+int si476x_core_cmd_power_up(struct si476x_core *core,
+ struct si476x_power_up_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].power_up(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_power_up);
+
+int si476x_core_cmd_power_down(struct si476x_core *core,
+ struct si476x_power_down_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].power_down(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_power_down);
+
+int si476x_core_cmd_fm_tune_freq(struct si476x_core *core,
+ struct si476x_tune_freq_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].fm_tune_freq(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_tune_freq);
+
+int si476x_core_cmd_am_tune_freq(struct si476x_core *core,
+ struct si476x_tune_freq_args *args)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].am_tune_freq(core, args);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_am_tune_freq);
+
+int si476x_core_cmd_fm_rsq_status(struct si476x_core *core,
+ struct si476x_rsq_status_args *args,
+ struct si476x_rsq_status_report *report)
+
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].fm_rsq_status(core, args,
+ report);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rsq_status);
+
+int si476x_core_cmd_agc_status(struct si476x_core *core,
+ struct si476x_agc_status_report *report)
+
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return si476x_cmds_vtable[core->revision].agc_status(core, report);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_agc_status);
+
+int si476x_core_cmd_intb_pin_cfg(struct si476x_core *core,
+ enum si476x_intb_config intb,
+ enum si476x_a1_config a1)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+
+ return si476x_cmds_vtable[core->revision].intb_pin_cfg(core, intb, a1);
+}
+EXPORT_SYMBOL_GPL(si476x_core_cmd_intb_pin_cfg);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("API for command exchange for si476x");
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v7 1/9] mfd: Add commands abstraction layer for SI476X MFD
2013-02-27 6:06 ` [PATCH v7 1/9] mfd: Add commands abstraction layer for SI476X MFD Andrey Smirnov
@ 2013-03-18 20:11 ` Mauro Carvalho Chehab
2013-03-20 1:10 ` Andrey Smirnov
0 siblings, 1 reply; 13+ messages in thread
From: Mauro Carvalho Chehab @ 2013-03-18 20:11 UTC (permalink / raw)
To: Andrey Smirnov; +Cc: hverkuil, sameo, sam, linux-media, linux-kernel
Em Tue, 26 Feb 2013 22:06:45 -0800
Andrey Smirnov <andrew.smirnov@gmail.com> escreveu:
> This patch adds all the functions used for exchanging commands with
> the chip.
Please run checkpatch.pl over those patches. There are a number of compliants
on those patches:
WARNING: externs should be avoided in .c files
#210: FILE: drivers/mfd/si476x-cmd.c:180:
+int si476x_core_i2c_xfer(struct si476x_core *,
WARNING: line over 80 characters
#328: FILE: drivers/mfd/si476x-cmd.c:298:
+ err = si476x_core_i2c_xfer(core, SI476X_I2C_SEND, (char *) data, argn + 1);
WARNING: line over 80 characters
#378: FILE: drivers/mfd/si476x-cmd.c:348:
+ dev_err(&core->client->dev, "[CMD 0x%02x] Chip set error flag\n", command);
ERROR: space required before the open parenthesis '('
#400: FILE: drivers/mfd/si476x-cmd.c:370:
+ switch(core->power_up_parameters.func) {
...
>
> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
> drivers/mfd/si476x-cmd.c | 1553 ++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 1553 insertions(+)
> create mode 100644 drivers/mfd/si476x-cmd.c
>
> diff --git a/drivers/mfd/si476x-cmd.c b/drivers/mfd/si476x-cmd.c
> new file mode 100644
> index 0000000..0ae1b63
> --- /dev/null
> +++ b/drivers/mfd/si476x-cmd.c
> @@ -0,0 +1,1553 @@
> +/*
> + * drivers/mfd/si476x-cmd.c -- Subroutines implementing command
> + * protocol of si476x series of chips
> + *
> + * Copyright (C) 2012 Innovative Converged Devices(ICD)
> + * Copyright (C) 2013 Andrey Smirnov
> + *
> + * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; version 2 of the License.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> + * General Public License for more details.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/completion.h>
> +#include <linux/delay.h>
> +#include <linux/atomic.h>
> +#include <linux/i2c.h>
> +#include <linux/device.h>
> +#include <linux/gpio.h>
> +#include <linux/videodev2.h>
> +
> +#include <media/si476x.h>
> +#include <linux/mfd/si476x-core.h>
> +
> +#define msb(x) ((u8)((u16) x >> 8))
> +#define lsb(x) ((u8)((u16) x & 0x00FF))
> +
> +
> +
> +#define CMD_POWER_UP 0x01
> +#define CMD_POWER_UP_A10_NRESP 1
> +#define CMD_POWER_UP_A10_NARGS 5
> +
> +#define CMD_POWER_UP_A20_NRESP 1
> +#define CMD_POWER_UP_A20_NARGS 5
> +
> +#define POWER_UP_DELAY_MS 110
> +
> +#define CMD_POWER_DOWN 0x11
> +#define CMD_POWER_DOWN_A10_NRESP 1
> +
> +#define CMD_POWER_DOWN_A20_NRESP 1
> +#define CMD_POWER_DOWN_A20_NARGS 1
> +
> +#define CMD_FUNC_INFO 0x12
> +#define CMD_FUNC_INFO_NRESP 7
> +
> +#define CMD_SET_PROPERTY 0x13
> +#define CMD_SET_PROPERTY_NARGS 5
> +#define CMD_SET_PROPERTY_NRESP 1
> +
> +#define CMD_GET_PROPERTY 0x14
> +#define CMD_GET_PROPERTY_NARGS 3
> +#define CMD_GET_PROPERTY_NRESP 4
> +
> +#define CMD_AGC_STATUS 0x17
> +#define CMD_AGC_STATUS_NRESP_A10 2
> +#define CMD_AGC_STATUS_NRESP_A20 6
> +
> +#define PIN_CFG_BYTE(x) (0x7F & (x))
> +#define CMD_DIG_AUDIO_PIN_CFG 0x18
> +#define CMD_DIG_AUDIO_PIN_CFG_NARGS 4
> +#define CMD_DIG_AUDIO_PIN_CFG_NRESP 5
> +
> +#define CMD_ZIF_PIN_CFG 0x19
> +#define CMD_ZIF_PIN_CFG_NARGS 4
> +#define CMD_ZIF_PIN_CFG_NRESP 5
> +
> +#define CMD_IC_LINK_GPO_CTL_PIN_CFG 0x1A
> +#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS 4
> +#define CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP 5
> +
> +#define CMD_ANA_AUDIO_PIN_CFG 0x1B
> +#define CMD_ANA_AUDIO_PIN_CFG_NARGS 1
> +#define CMD_ANA_AUDIO_PIN_CFG_NRESP 2
> +
> +#define CMD_INTB_PIN_CFG 0x1C
> +#define CMD_INTB_PIN_CFG_NARGS 2
> +#define CMD_INTB_PIN_CFG_A10_NRESP 6
> +#define CMD_INTB_PIN_CFG_A20_NRESP 3
> +
> +#define CMD_FM_TUNE_FREQ 0x30
> +#define CMD_FM_TUNE_FREQ_A10_NARGS 5
> +#define CMD_FM_TUNE_FREQ_A20_NARGS 3
> +#define CMD_FM_TUNE_FREQ_NRESP 1
> +
> +#define CMD_FM_RSQ_STATUS 0x32
> +
> +#define CMD_FM_RSQ_STATUS_A10_NARGS 1
> +#define CMD_FM_RSQ_STATUS_A10_NRESP 17
> +#define CMD_FM_RSQ_STATUS_A30_NARGS 1
> +#define CMD_FM_RSQ_STATUS_A30_NRESP 23
> +
> +
> +#define CMD_FM_SEEK_START 0x31
> +#define CMD_FM_SEEK_START_NARGS 1
> +#define CMD_FM_SEEK_START_NRESP 1
> +
> +#define CMD_FM_RDS_STATUS 0x36
> +#define CMD_FM_RDS_STATUS_NARGS 1
> +#define CMD_FM_RDS_STATUS_NRESP 16
> +
> +#define CMD_FM_RDS_BLOCKCOUNT 0x37
> +#define CMD_FM_RDS_BLOCKCOUNT_NARGS 1
> +#define CMD_FM_RDS_BLOCKCOUNT_NRESP 8
> +
> +#define CMD_FM_PHASE_DIVERSITY 0x38
> +#define CMD_FM_PHASE_DIVERSITY_NARGS 1
> +#define CMD_FM_PHASE_DIVERSITY_NRESP 1
> +
> +#define CMD_FM_PHASE_DIV_STATUS 0x39
> +#define CMD_FM_PHASE_DIV_STATUS_NRESP 2
> +
> +#define CMD_AM_TUNE_FREQ 0x40
> +#define CMD_AM_TUNE_FREQ_NARGS 3
> +#define CMD_AM_TUNE_FREQ_NRESP 1
> +
> +#define CMD_AM_RSQ_STATUS 0x42
> +#define CMD_AM_RSQ_STATUS_NARGS 1
> +#define CMD_AM_RSQ_STATUS_NRESP 13
> +
> +#define CMD_AM_SEEK_START 0x41
> +#define CMD_AM_SEEK_START_NARGS 1
> +#define CMD_AM_SEEK_START_NRESP 1
> +
> +
> +#define CMD_AM_ACF_STATUS 0x45
> +#define CMD_AM_ACF_STATUS_NRESP 6
> +#define CMD_AM_ACF_STATUS_NARGS 1
> +
> +#define CMD_FM_ACF_STATUS 0x35
> +#define CMD_FM_ACF_STATUS_NRESP 8
> +#define CMD_FM_ACF_STATUS_NARGS 1
> +
> +#define CMD_MAX_ARGS_COUNT (10)
> +
> +
> +enum si476x_acf_status_report_bits {
> + SI476X_ACF_BLEND_INT = (1 << 4),
> + SI476X_ACF_HIBLEND_INT = (1 << 3),
> + SI476X_ACF_HICUT_INT = (1 << 2),
> + SI476X_ACF_CHBW_INT = (1 << 1),
> + SI476X_ACF_SOFTMUTE_INT = (1 << 0),
> +
> + SI476X_ACF_SMUTE = (1 << 0),
> + SI476X_ACF_SMATTN = 0b11111,
> + SI476X_ACF_PILOT = (1 << 7),
> + SI476X_ACF_STBLEND = ~SI476X_ACF_PILOT,
> +};
> +
> +enum si476x_agc_status_report_bits {
> + SI476X_AGC_MXHI = (1 << 5),
> + SI476X_AGC_MXLO = (1 << 4),
> + SI476X_AGC_LNAHI = (1 << 3),
> + SI476X_AGC_LNALO = (1 << 2),
> +};
> +
> +enum si476x_errors {
> + SI476X_ERR_BAD_COMMAND = 0x10,
> + SI476X_ERR_BAD_ARG1 = 0x11,
> + SI476X_ERR_BAD_ARG2 = 0x12,
> + SI476X_ERR_BAD_ARG3 = 0x13,
> + SI476X_ERR_BAD_ARG4 = 0x14,
> + SI476X_ERR_BUSY = 0x18,
> + SI476X_ERR_BAD_INTERNAL_MEMORY = 0x20,
> + SI476X_ERR_BAD_PATCH = 0x30,
> + SI476X_ERR_BAD_BOOT_MODE = 0x31,
> + SI476X_ERR_BAD_PROPERTY = 0x40,
> +};
> +
> +
> +int si476x_core_i2c_xfer(struct si476x_core *,
> + enum si476x_i2c_type,
> + char *, int);
> +
> +
> +static int si476x_core_parse_and_nag_about_error(struct si476x_core *core)
> +{
> + int err;
> + char *cause;
> + u8 buffer[2];
> +
> + if (core->revision != SI476X_REVISION_A10) {
> + err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV,
> + buffer, sizeof(buffer));
> + if (err == sizeof(buffer)) {
> + switch (buffer[1]) {
> + case SI476X_ERR_BAD_COMMAND:
> + cause = "Bad command";
> + err = -EINVAL;
> + break;
> + case SI476X_ERR_BAD_ARG1:
> + cause = "Bad argument #1";
> + err = -EINVAL;
> + break;
> + case SI476X_ERR_BAD_ARG2:
> + cause = "Bad argument #2";
> + err = -EINVAL;
> + break;
> + case SI476X_ERR_BAD_ARG3:
> + cause = "Bad argument #3";
> + err = -EINVAL;
> + break;
> + case SI476X_ERR_BAD_ARG4:
> + cause = "Bad argument #4";
> + err = -EINVAL;
> + break;
> + case SI476X_ERR_BUSY:
> + cause = "Chip is busy";
> + err = -EBUSY;
> + break;
> + case SI476X_ERR_BAD_INTERNAL_MEMORY:
> + cause = "Bad internal memory";
> + err = -EIO;
> + break;
> + case SI476X_ERR_BAD_PATCH:
> + cause = "Bad patch";
> + err = -EINVAL;
> + break;
> + case SI476X_ERR_BAD_BOOT_MODE:
> + cause = "Bad boot mode";
> + err = -EINVAL;
> + break;
> + case SI476X_ERR_BAD_PROPERTY:
> + cause = "Bad property";
> + err = -EINVAL;
> + break;
> + default:
> + cause = "Unknown";
> + err = -EIO;
> + }
> +
> + dev_err(&core->client->dev,
> + "[Chip error status]: %s\n", cause);
> + } else {
> + dev_err(&core->client->dev,
> + "Failed to fetch error code\n");
> + err = (err >= 0) ? -EIO : err;
> + }
> + } else {
> + err = -EIO;
> + }
> +
> + return err;
> +}
> +
> +/**
> + * si476x_core_send_command() - sends a command to si476x and waits its
> + * response
> + * @core: si476x_device structure for the device we are
> + * communicating with
> + * @command: command id
> + * @args: command arguments we are sending
> + * @argn: actual size of @args
> + * @response: buffer to place the expected response from the device
> + * @respn: actual size of @response
> + * @usecs: amount of time to wait before reading the response (in
> + * usecs)
> + *
> + * Function returns 0 on succsess and negative error code on
> + * failure
> + */
> +static int si476x_core_send_command(struct si476x_core *core,
> + const u8 command,
> + const u8 args[],
> + const int argn,
> + u8 resp[],
> + const int respn,
> + const int usecs)
> +{
> + struct i2c_client *client = core->client;
> + int err;
> + u8 data[CMD_MAX_ARGS_COUNT + 1];
> +
> + if (argn > CMD_MAX_ARGS_COUNT) {
> + err = -ENOMEM;
> + goto exit;
> + }
> +
> + if (!client->adapter) {
> + err = -ENODEV;
> + goto exit;
> + }
> +
> + /* First send the command and its arguments */
> + data[0] = command;
> + memcpy(&data[1], args, argn);
> + dev_dbg(&client->dev, "Command:\n %*ph\n", argn + 1, data);
> +
> + err = si476x_core_i2c_xfer(core, SI476X_I2C_SEND, (char *) data, argn + 1);
> + if (err != argn + 1) {
> + dev_err(&core->client->dev,
> + "Error while sending command 0x%02x\n",
> + command);
> + err = (err >= 0) ? -EIO : err;
> + goto exit;
> + }
> + /* Set CTS to zero only after the command is send to avoid
> + * possible racing conditions when working in polling mode */
> + atomic_set(&core->cts, 0);
> +
> + /* if (unlikely(command == CMD_POWER_DOWN) */
> + if (!wait_event_timeout(core->command,
> + atomic_read(&core->cts),
> + usecs_to_jiffies(usecs) + 1))
> + dev_warn(&core->client->dev,
> + "(%s) [CMD 0x%02x] Device took too much time to answer.\n",
> + __func__, command);
> +
> + /*
> + When working in polling mode, for some reason the tuner will
> + report CTS bit as being set in the first status byte read,
> + but all the consequtive ones will return zeros until the
> + tuner is actually completed the POWER_UP command. To
> + workaround that we wait for second CTS to be reported
> + */
> + if (unlikely(!core->client->irq && command == CMD_POWER_UP)) {
> + if (!wait_event_timeout(core->command,
> + atomic_read(&core->cts),
> + usecs_to_jiffies(usecs) + 1))
> + dev_warn(&core->client->dev,
> + "(%s) Power up took too much time.\n",
> + __func__);
> + }
> +
> + /* Then get the response */
> + err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV, resp, respn);
> + if (err != respn) {
> + dev_err(&core->client->dev,
> + "Error while reading response for command 0x%02x\n",
> + command);
> + err = (err >= 0) ? -EIO : err;
> + goto exit;
> + }
> + dev_dbg(&client->dev, "Response:\n %*ph\n", respn, resp);
> +
> + err = 0;
> +
> + if (resp[0] & SI476X_ERR) {
> + dev_err(&core->client->dev, "[CMD 0x%02x] Chip set error flag\n", command);
> + err = si476x_core_parse_and_nag_about_error(core);
> + goto exit;
> + }
> +
> + if (!(resp[0] & SI476X_CTS))
> + err = -EBUSY;
> +exit:
> + return err;
> +}
> +
> +static int si476x_cmd_clear_stc(struct si476x_core *core)
> +{
> + int err;
> + struct si476x_rsq_status_args args = {
> + .primary = false,
> + .rsqack = false,
> + .attune = false,
> + .cancel = false,
> + .stcack = true,
> + };
> +
> + switch(core->power_up_parameters.func) {
> + case SI476X_FUNC_FM_RECEIVER:
> + err = si476x_core_cmd_fm_rsq_status(core, &args, NULL);
> + break;
> + case SI476X_FUNC_AM_RECEIVER:
> + err = si476x_core_cmd_am_rsq_status(core, &args, NULL);
> + break;
> + default:
> + err = -EINVAL;
> + }
> +
> + return err;
> +}
> +
> +static int si476x_cmd_tune_seek_freq(struct si476x_core *core,
> + uint8_t cmd,
> + const uint8_t args[], size_t argn,
> + uint8_t *resp, size_t respn)
> +{
> + int err;
> +
> +
> + atomic_set(&core->stc, 0);
> + err = si476x_core_send_command(core, cmd, args, argn, resp, respn,
> + SI476X_TIMEOUT_TUNE);
> + if (!err) {
> + wait_event_killable(core->tuning,
> + atomic_read(&core->stc));
> + si476x_cmd_clear_stc(core);
> + }
> +
> + return err;
> +}
> +
> +/**
> + * si476x_cmd_func_info() - send 'FUNC_INFO' command to the device
> + * @core: device to send the command to
> + * @info: struct si476x_func_info to fill all the information
> + * returned by the command
> + *
> + * The command requests the firmware and patch version for currently
> + * loaded firmware (dependent on the function of the device FM/AM/WB)
> + *
> + * Function returns 0 on succsess and negative error code on
> + * failure
> + */
> +int si476x_core_cmd_func_info(struct si476x_core *core,
> + struct si476x_func_info *info)
> +{
> + int err;
> + u8 resp[CMD_FUNC_INFO_NRESP];
> +
> + err = si476x_core_send_command(core, CMD_FUNC_INFO,
> + NULL, 0,
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +
> + info->firmware.major = resp[1];
> + info->firmware.minor[0] = resp[2];
> + info->firmware.minor[1] = resp[3];
> +
> + info->patch_id = ((u16) resp[4] << 8) | resp[5];
> + info->func = resp[6];
> +
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_func_info);
> +
> +/**
> + * si476x_cmd_set_property() - send 'SET_PROPERTY' command to the device
> + * @core: device to send the command to
> + * @property: property address
> + * @value: property value
> + *
> + * Function returns 0 on succsess and negative error code on
> + * failure
> + */
> +int si476x_core_cmd_set_property(struct si476x_core *core,
> + u16 property, u16 value)
> +{
> + u8 resp[CMD_SET_PROPERTY_NRESP];
> + const u8 args[CMD_SET_PROPERTY_NARGS] = {
> + 0x00,
> + msb(property),
> + lsb(property),
> + msb(value),
> + lsb(value),
> + };
> +
> + return si476x_core_send_command(core, CMD_SET_PROPERTY,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_set_property);
> +
> +/**
> + * si476x_cmd_get_property() - send 'GET_PROPERTY' command to the device
> + * @core: device to send the command to
> + * @property: property address
> + *
> + * Function return the value of property as u16 on success or a
> + * negative error on failure
> + */
> +int si476x_core_cmd_get_property(struct si476x_core *core, u16 property)
> +{
> + int err;
> + u8 resp[CMD_GET_PROPERTY_NRESP];
> + const u8 args[CMD_GET_PROPERTY_NARGS] = {
> + 0x00,
> + msb(property),
> + lsb(property),
> + };
> +
> + err = si476x_core_send_command(core, CMD_GET_PROPERTY,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + if (err < 0)
> + return err;
> + else
> + return be16_to_cpup((__be16 *)(resp + 2));
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_get_property);
> +
> +/**
> + * si476x_cmd_dig_audio_pin_cfg() - send 'DIG_AUDIO_PIN_CFG' command to
> + * the device
> + * @core: device to send the command to
> + * @dclk: DCLK pin function configuration:
> + * #SI476X_DCLK_NOOP - do not modify the behaviour
> + * #SI476X_DCLK_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * #SI476X_DCLK_DAUDIO - set the pin to be a part of digital
> + * audio interface
> + * @dfs: DFS pin function configuration:
> + * #SI476X_DFS_NOOP - do not modify the behaviour
> + * #SI476X_DFS_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_DFS_DAUDIO - set the pin to be a part of digital
> + * audio interface
> + * @dout - DOUT pin function configuration:
> + * SI476X_DOUT_NOOP - do not modify the behaviour
> + * SI476X_DOUT_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_DOUT_I2S_OUTPUT - set this pin to be digital out on I2S
> + * port 1
> + * SI476X_DOUT_I2S_INPUT - set this pin to be digital in on I2S
> + * port 1
> + * @xout - XOUT pin function configuration:
> + * SI476X_XOUT_NOOP - do not modify the behaviour
> + * SI476X_XOUT_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_XOUT_I2S_INPUT - set this pin to be digital in on I2S
> + * port 1
> + * SI476X_XOUT_MODE_SELECT - set this pin to be the input that
> + * selects the mode of the I2S audio
> + * combiner (analog or HD)
> + * [SI4761/63/65/67 Only]
> + *
> + * Function returns 0 on success and negative error code on failure
> + */
> +int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *core,
> + enum si476x_dclk_config dclk,
> + enum si476x_dfs_config dfs,
> + enum si476x_dout_config dout,
> + enum si476x_xout_config xout)
> +{
> + u8 resp[CMD_DIG_AUDIO_PIN_CFG_NRESP];
> + const u8 args[CMD_DIG_AUDIO_PIN_CFG_NARGS] = {
> + PIN_CFG_BYTE(dclk),
> + PIN_CFG_BYTE(dfs),
> + PIN_CFG_BYTE(dout),
> + PIN_CFG_BYTE(xout),
> + };
> +
> + return si476x_core_send_command(core, CMD_DIG_AUDIO_PIN_CFG,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_dig_audio_pin_cfg);
> +
> +/**
> + * si476x_cmd_zif_pin_cfg - send 'ZIF_PIN_CFG_COMMAND'
> + * @core - device to send the command to
> + * @iqclk - IQCL pin function configuration:
> + * SI476X_IQCLK_NOOP - do not modify the behaviour
> + * SI476X_IQCLK_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_IQCLK_IQ - set pin to be a part of I/Q interace
> + * in master mode
> + * @iqfs - IQFS pin function configuration:
> + * SI476X_IQFS_NOOP - do not modify the behaviour
> + * SI476X_IQFS_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_IQFS_IQ - set pin to be a part of I/Q interace
> + * in master mode
> + * @iout - IOUT pin function configuration:
> + * SI476X_IOUT_NOOP - do not modify the behaviour
> + * SI476X_IOUT_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_IOUT_OUTPUT - set pin to be I out
> + * @qout - QOUT pin function configuration:
> + * SI476X_QOUT_NOOP - do not modify the behaviour
> + * SI476X_QOUT_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_QOUT_OUTPUT - set pin to be Q out
> + *
> + * Function returns 0 on success and negative error code on failure
> + */
> +int si476x_core_cmd_zif_pin_cfg(struct si476x_core *core,
> + enum si476x_iqclk_config iqclk,
> + enum si476x_iqfs_config iqfs,
> + enum si476x_iout_config iout,
> + enum si476x_qout_config qout)
> +{
> + u8 resp[CMD_ZIF_PIN_CFG_NRESP];
> + const u8 args[CMD_ZIF_PIN_CFG_NARGS] = {
> + PIN_CFG_BYTE(iqclk),
> + PIN_CFG_BYTE(iqfs),
> + PIN_CFG_BYTE(iout),
> + PIN_CFG_BYTE(qout),
> + };
> +
> + return si476x_core_send_command(core, CMD_ZIF_PIN_CFG,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_zif_pin_cfg);
> +
> +/**
> + * si476x_cmd_ic_link_gpo_ctl_pin_cfg - send
> + * 'IC_LINK_GPIO_CTL_PIN_CFG' comand to the device
> + * @core - device to send the command to
> + * @icin - ICIN pin function configuration:
> + * SI476X_ICIN_NOOP - do not modify the behaviour
> + * SI476X_ICIN_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_ICIN_GPO1_HIGH - set pin to be an output, drive it high
> + * SI476X_ICIN_GPO1_LOW - set pin to be an output, drive it low
> + * SI476X_ICIN_IC_LINK - set the pin to be a part of Inter-Chip link
> + * @icip - ICIP pin function configuration:
> + * SI476X_ICIP_NOOP - do not modify the behaviour
> + * SI476X_ICIP_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_ICIP_GPO1_HIGH - set pin to be an output, drive it high
> + * SI476X_ICIP_GPO1_LOW - set pin to be an output, drive it low
> + * SI476X_ICIP_IC_LINK - set the pin to be a part of Inter-Chip link
> + * @icon - ICON pin function configuration:
> + * SI476X_ICON_NOOP - do not modify the behaviour
> + * SI476X_ICON_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_ICON_I2S - set the pin to be a part of audio
> + * interface in slave mode (DCLK)
> + * SI476X_ICON_IC_LINK - set the pin to be a part of Inter-Chip link
> + * @icop - ICOP pin function configuration:
> + * SI476X_ICOP_NOOP - do not modify the behaviour
> + * SI476X_ICOP_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_ICOP_I2S - set the pin to be a part of audio
> + * interface in slave mode (DOUT)
> + * [Si4761/63/65/67 Only]
> + * SI476X_ICOP_IC_LINK - set the pin to be a part of Inter-Chip link
> + *
> + * Function returns 0 on success and negative error code on failure
> + */
> +int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *core,
> + enum si476x_icin_config icin,
> + enum si476x_icip_config icip,
> + enum si476x_icon_config icon,
> + enum si476x_icop_config icop)
> +{
> + u8 resp[CMD_IC_LINK_GPO_CTL_PIN_CFG_NRESP];
> + const u8 args[CMD_IC_LINK_GPO_CTL_PIN_CFG_NARGS] = {
> + PIN_CFG_BYTE(icin),
> + PIN_CFG_BYTE(icip),
> + PIN_CFG_BYTE(icon),
> + PIN_CFG_BYTE(icop),
> + };
> +
> + return si476x_core_send_command(core, CMD_IC_LINK_GPO_CTL_PIN_CFG,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_ic_link_gpo_ctl_pin_cfg);
> +
> +/**
> + * si476x_cmd_ana_audio_pin_cfg - send 'ANA_AUDIO_PIN_CFG' to the
> + * device
> + * @core - device to send the command to
> + * @lrout - LROUT pin function configuration:
> + * SI476X_LROUT_NOOP - do not modify the behaviour
> + * SI476X_LROUT_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_LROUT_AUDIO - set pin to be audio output
> + * SI476X_LROUT_MPX - set pin to be MPX output
> + *
> + * Function returns 0 on success and negative error code on failure
> + */
> +int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *core,
> + enum si476x_lrout_config lrout)
> +{
> + u8 resp[CMD_ANA_AUDIO_PIN_CFG_NRESP];
> + const u8 args[CMD_ANA_AUDIO_PIN_CFG_NARGS] = {
> + PIN_CFG_BYTE(lrout),
> + };
> +
> + return si476x_core_send_command(core, CMD_ANA_AUDIO_PIN_CFG,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_ana_audio_pin_cfg);
> +
> +
> +/**
> + * si476x_cmd_intb_pin_cfg - send 'INTB_PIN_CFG' command to the device
> + * @core - device to send the command to
> + * @intb - INTB pin function configuration:
> + * SI476X_INTB_NOOP - do not modify the behaviour
> + * SI476X_INTB_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_INTB_DAUDIO - set pin to be a part of digital
> + * audio interface in slave mode
> + * SI476X_INTB_IRQ - set pin to be an interrupt request line
> + * @a1 - A1 pin function configuration:
> + * SI476X_A1_NOOP - do not modify the behaviour
> + * SI476X_A1_TRISTATE - put the pin in tristate condition,
> + * enable 1MOhm pulldown
> + * SI476X_A1_IRQ - set pin to be an interrupt request line
> + *
> + * Function returns 0 on success and negative error code on failure
> + */
> +static int si476x_core_cmd_intb_pin_cfg_a10(struct si476x_core *core,
> + enum si476x_intb_config intb,
> + enum si476x_a1_config a1)
> +{
> + u8 resp[CMD_INTB_PIN_CFG_A10_NRESP];
> + const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
> + PIN_CFG_BYTE(intb),
> + PIN_CFG_BYTE(a1),
> + };
> +
> + return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +
> +static int si476x_core_cmd_intb_pin_cfg_a20(struct si476x_core *core,
> + enum si476x_intb_config intb,
> + enum si476x_a1_config a1)
> +{
> + u8 resp[CMD_INTB_PIN_CFG_A20_NRESP];
> + const u8 args[CMD_INTB_PIN_CFG_NARGS] = {
> + PIN_CFG_BYTE(intb),
> + PIN_CFG_BYTE(a1),
> + };
> +
> + return si476x_core_send_command(core, CMD_INTB_PIN_CFG,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +
> +
> +
> +/**
> + * si476x_cmd_am_rsq_status - send 'AM_RSQ_STATUS' command to the
> + * device
> + * @core - device to send the command to
> + * @rsqack - if set command clears RSQINT, SNRINT, SNRLINT, RSSIHINT,
> + * RSSSILINT, BLENDINT, MULTHINT and MULTLINT
> + * @attune - when set the values in the status report are the values
> + * that were calculated at tune
> + * @cancel - abort ongoing seek/tune opertation
> + * @stcack - clear the STCINT bin in status register
> + * @report - all signal quality information retured by the command
> + * (if NULL then the output of the command is ignored)
> + *
> + * Function returns 0 on success and negative error code on failure
> + */
> +int si476x_core_cmd_am_rsq_status(struct si476x_core *core,
> + struct si476x_rsq_status_args *rsqargs,
> + struct si476x_rsq_status_report *report)
> +{
> + int err;
> + u8 resp[CMD_AM_RSQ_STATUS_NRESP];
> + const u8 args[CMD_AM_RSQ_STATUS_NARGS] = {
> + rsqargs->rsqack << 3 | rsqargs->attune << 2 |
> + rsqargs->cancel << 1 | rsqargs->stcack,
> + };
> +
> + err = si476x_core_send_command(core, CMD_AM_RSQ_STATUS,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + /*
> + * Besides getting received signal quality information this
> + * command can be used to just acknowledge different interrupt
> + * flags in those cases it is useless to copy and parse
> + * received data so user can pass NULL, and thus avoid
> + * unnecessary copying.
> + */
> + if (!report)
> + return err;
> +
> + report->snrhint = 0b00001000 & resp[1];
> + report->snrlint = 0b00000100 & resp[1];
> + report->rssihint = 0b00000010 & resp[1];
> + report->rssilint = 0b00000001 & resp[1];
> +
> + report->bltf = 0b10000000 & resp[2];
> + report->snr_ready = 0b00100000 & resp[2];
> + report->rssiready = 0b00001000 & resp[2];
> + report->afcrl = 0b00000010 & resp[2];
> + report->valid = 0b00000001 & resp[2];
> +
> + report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
> + report->freqoff = resp[5];
> + report->rssi = resp[6];
> + report->snr = resp[7];
> + report->lassi = resp[9];
> + report->hassi = resp[10];
> + report->mult = resp[11];
> + report->dev = resp[12];
> +
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_am_rsq_status);
> +
> +int si476x_core_cmd_fm_acf_status(struct si476x_core *core,
> + struct si476x_acf_status_report *report)
> +{
> + int err;
> + u8 resp[CMD_FM_ACF_STATUS_NRESP];
> + const u8 args[CMD_FM_ACF_STATUS_NARGS] = {
> + 0x0,
> + };
> +
> + if (!report)
> + return -EINVAL;
> +
> + err = si476x_core_send_command(core, CMD_FM_ACF_STATUS,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + if (err < 0)
> + return err;
> +
> + report->blend_int = resp[1] & SI476X_ACF_BLEND_INT;
> + report->hblend_int = resp[1] & SI476X_ACF_HIBLEND_INT;
> + report->hicut_int = resp[1] & SI476X_ACF_HICUT_INT;
> + report->chbw_int = resp[1] & SI476X_ACF_CHBW_INT;
> + report->softmute_int = resp[1] & SI476X_ACF_SOFTMUTE_INT;
> + report->smute = resp[2] & SI476X_ACF_SMUTE;
> + report->smattn = resp[3] & SI476X_ACF_SMATTN;
> + report->chbw = resp[4];
> + report->hicut = resp[5];
> + report->hiblend = resp[6];
> + report->pilot = resp[7] & SI476X_ACF_PILOT;
> + report->stblend = resp[7] & SI476X_ACF_STBLEND;
> +
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_acf_status);
> +
> +int si476x_core_cmd_am_acf_status(struct si476x_core *core,
> + struct si476x_acf_status_report *report)
> +{
> + int err;
> + u8 resp[CMD_AM_ACF_STATUS_NRESP];
> + const u8 args[CMD_AM_ACF_STATUS_NARGS] = {
> + 0x0,
> + };
> +
> + if (!report)
> + return -EINVAL;
> +
> + err = si476x_core_send_command(core, CMD_AM_ACF_STATUS,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + if (err < 0)
> + return err;
> +
> + report->blend_int = resp[1] & SI476X_ACF_BLEND_INT;
> + report->hblend_int = resp[1] & SI476X_ACF_HIBLEND_INT;
> + report->hicut_int = resp[1] & SI476X_ACF_HICUT_INT;
> + report->chbw_int = resp[1] & SI476X_ACF_CHBW_INT;
> + report->softmute_int = resp[1] & SI476X_ACF_SOFTMUTE_INT;
> + report->smute = resp[2] & SI476X_ACF_SMUTE;
> + report->smattn = resp[3] & SI476X_ACF_SMATTN;
> + report->chbw = resp[4];
> + report->hicut = resp[5];
> +
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_am_acf_status);
> +
> +
> +/**
> + * si476x_cmd_fm_seek_start - send 'FM_SEEK_START' command to the
> + * device
> + * @core - device to send the command to
> + * @seekup - if set the direction of the search is 'up'
> + * @wrap - if set seek wraps when hitting band limit
> + *
> + * This function begins search for a valid station. The station is
> + * considered valid when 'FM_VALID_SNR_THRESHOLD' and
> + * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
> + * are met.
> +} *
> + * Function returns 0 on success and negative error code on failure
> + */
> +int si476x_core_cmd_fm_seek_start(struct si476x_core *core,
> + bool seekup, bool wrap)
> +{
> + u8 resp[CMD_FM_SEEK_START_NRESP];
> + const u8 args[CMD_FM_SEEK_START_NARGS] = {
> + seekup << 3 | wrap << 2,
> + };
> +
> + return si476x_cmd_tune_seek_freq(core, CMD_FM_SEEK_START,
> + args, sizeof(args), resp, sizeof(resp));
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_seek_start);
> +
> +/**
> + * si476x_cmd_fm_rds_status - send 'FM_RDS_STATUS' command to the
> + * device
> + * @core - device to send the command to
> + * @status_only - if set the data is not removed from RDSFIFO,
> + * RDSFIFOUSED is not decremented and data in all the
> + * rest RDS data contains the last valid info received
> + * @mtfifo if set the command clears RDS receive FIFO
> + * @intack if set the command clards the RDSINT bit.
> + *
> + * Function returns 0 on success and negative error code on failure
> + */
> +int si476x_core_cmd_fm_rds_status(struct si476x_core *core,
> + bool status_only,
> + bool mtfifo,
> + bool intack,
> + struct si476x_rds_status_report *report)
> +{
> + int err;
> + u8 resp[CMD_FM_RDS_STATUS_NRESP];
> + const u8 args[CMD_FM_RDS_STATUS_NARGS] = {
> + status_only << 2 | mtfifo << 1 | intack,
> + };
> +
> + err = si476x_core_send_command(core, CMD_FM_RDS_STATUS,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + /*
> + * Besides getting RDS status information this command can be
> + * used to just acknowledge different interrupt flags in those
> + * cases it is useless to copy and parse received data so user
> + * can pass NULL, and thus avoid unnecessary copying.
> + */
> + if (err < 0 || report == NULL)
> + return err;
> +
> + report->rdstpptyint = 0b00010000 & resp[1];
> + report->rdspiint = 0b00001000 & resp[1];
> + report->rdssyncint = 0b00000010 & resp[1];
> + report->rdsfifoint = 0b00000001 & resp[1];
> +
> + report->tpptyvalid = 0b00010000 & resp[2];
> + report->pivalid = 0b00001000 & resp[2];
> + report->rdssync = 0b00000010 & resp[2];
> + report->rdsfifolost = 0b00000001 & resp[2];
> +
> + report->tp = 0b00100000 & resp[3];
> + report->pty = 0b00011111 & resp[3];
> +
> + report->pi = be16_to_cpup((__be16 *)(resp + 4));
> + report->rdsfifoused = resp[6];
> +
> + report->ble[V4L2_RDS_BLOCK_A] = 0b11000000 & resp[7];
> + report->ble[V4L2_RDS_BLOCK_B] = 0b00110000 & resp[7];
> + report->ble[V4L2_RDS_BLOCK_C] = 0b00001100 & resp[7];
> + report->ble[V4L2_RDS_BLOCK_D] = 0b00000011 & resp[7];
> +
> + report->rds[V4L2_RDS_BLOCK_A].block = V4L2_RDS_BLOCK_A;
> + report->rds[V4L2_RDS_BLOCK_A].msb = resp[8];
> + report->rds[V4L2_RDS_BLOCK_A].lsb = resp[9];
> +
> + report->rds[V4L2_RDS_BLOCK_B].block = V4L2_RDS_BLOCK_B;
> + report->rds[V4L2_RDS_BLOCK_B].msb = resp[10];
> + report->rds[V4L2_RDS_BLOCK_B].lsb = resp[11];
> +
> + report->rds[V4L2_RDS_BLOCK_C].block = V4L2_RDS_BLOCK_C;
> + report->rds[V4L2_RDS_BLOCK_C].msb = resp[12];
> + report->rds[V4L2_RDS_BLOCK_C].lsb = resp[13];
> +
> + report->rds[V4L2_RDS_BLOCK_D].block = V4L2_RDS_BLOCK_D;
> + report->rds[V4L2_RDS_BLOCK_D].msb = resp[14];
> + report->rds[V4L2_RDS_BLOCK_D].lsb = resp[15];
> +
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_status);
> +
> +int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *core,
> + bool clear,
> + struct si476x_rds_blockcount_report *report)
> +{
> + int err;
> + u8 resp[CMD_FM_RDS_BLOCKCOUNT_NRESP];
> + const u8 args[CMD_FM_RDS_BLOCKCOUNT_NARGS] = {
> + clear,
> + };
> +
> + if (!report)
> + return -EINVAL;
> +
> + err = si476x_core_send_command(core, CMD_FM_RDS_BLOCKCOUNT,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +
> + if (!err) {
> + report->expected = be16_to_cpup((__be16 *)(resp + 2));
> + report->received = be16_to_cpup((__be16 *)(resp + 4));
> + report->uncorrectable = be16_to_cpup((__be16 *)(resp + 6));
> + }
> +
> + return err;
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rds_blockcount);
> +
> +int si476x_core_cmd_fm_phase_diversity(struct si476x_core *core,
> + enum si476x_phase_diversity_mode mode)
> +{
> + u8 resp[CMD_FM_PHASE_DIVERSITY_NRESP];
> + const u8 args[CMD_FM_PHASE_DIVERSITY_NARGS] = {
> + mode & 0b111,
> + };
> +
> + return si476x_core_send_command(core, CMD_FM_PHASE_DIVERSITY,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_diversity);
> +/**
> + * si476x_core_cmd_fm_phase_div_status() - get the phase diversity
> + * status
> + *
> + * @core: si476x device
> + *
> + * NOTE caller must hold core lock
> + *
> + * Function returns the value of the status bit in case of success and
> + * negative error code in case of failre.
> + */
> +int si476x_core_cmd_fm_phase_div_status(struct si476x_core *core)
> +{
> + int err;
> + u8 resp[CMD_FM_PHASE_DIV_STATUS_NRESP];
> +
> + err = si476x_core_send_command(core, CMD_FM_PHASE_DIV_STATUS,
> + NULL, 0,
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +
> + return (err < 0) ? err : resp[1];
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_phase_div_status);
> +
> +
> +/**
> + * si476x_cmd_am_seek_start - send 'FM_SEEK_START' command to the
> + * device
> + * @core - device to send the command to
> + * @seekup - if set the direction of the search is 'up'
> + * @wrap - if set seek wraps when hitting band limit
> + *
> + * This function begins search for a valid station. The station is
> + * considered valid when 'FM_VALID_SNR_THRESHOLD' and
> + * 'FM_VALID_RSSI_THRESHOLD' and 'FM_VALID_MAX_TUNE_ERROR' criteria
> + * are met.
> + *
> + * Function returns 0 on success and negative error code on failure
> + */
> +int si476x_core_cmd_am_seek_start(struct si476x_core *core,
> + bool seekup, bool wrap)
> +{
> + u8 resp[CMD_AM_SEEK_START_NRESP];
> + const u8 args[CMD_AM_SEEK_START_NARGS] = {
> + seekup << 3 | wrap << 2,
> + };
> +
> + return si476x_cmd_tune_seek_freq(core, CMD_AM_SEEK_START,
> + args, sizeof(args), resp, sizeof(resp));
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_am_seek_start);
> +
> +
> +
> +static int si476x_core_cmd_power_up_a10(struct si476x_core *core,
> + struct si476x_power_up_args *puargs)
> +{
> + u8 resp[CMD_POWER_UP_A10_NRESP];
> + const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
> + const bool ctsen = (core->client->irq != 0);
> + const u8 args[CMD_POWER_UP_A10_NARGS] = {
> + 0xF7, /* Reserved, always 0xF7 */
> + 0x3F & puargs->xcload, /* First two bits are reserved to be
> + * zeros */
> + ctsen << 7 | intsel << 6 | 0x07, /* Last five bits
> + * are reserved to
> + * be written as 0x7 */
> + puargs->func << 4 | puargs->freq,
> + 0x11, /* Reserved, always 0x11 */
> + };
> +
> + return si476x_core_send_command(core, CMD_POWER_UP,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_TIMEOUT_POWER_UP);
> +}
> +
> +static int si476x_core_cmd_power_up_a20(struct si476x_core *core,
> + struct si476x_power_up_args *puargs)
> +{
> + u8 resp[CMD_POWER_UP_A20_NRESP];
> + const bool intsel = (core->pinmux.a1 == SI476X_A1_IRQ);
> + const bool ctsen = (core->client->irq != 0);
> + const u8 args[CMD_POWER_UP_A20_NARGS] = {
> + puargs->ibias6x << 7 | puargs->xstart,
> + 0x3F & puargs->xcload, /* First two bits are reserved to be
> + * zeros */
> + ctsen << 7 | intsel << 6 | puargs->fastboot << 5 |
> + puargs->xbiashc << 3 | puargs->xbias,
> + puargs->func << 4 | puargs->freq,
> + 0x10 | puargs->xmode,
> + };
> +
> + return si476x_core_send_command(core, CMD_POWER_UP,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_TIMEOUT_POWER_UP);
> +}
> +
> +static int si476x_core_cmd_power_down_a10(struct si476x_core *core,
> + struct si476x_power_down_args *pdargs)
> +{
> + u8 resp[CMD_POWER_DOWN_A10_NRESP];
> +
> + return si476x_core_send_command(core, CMD_POWER_DOWN,
> + NULL, 0,
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +
> +static int si476x_core_cmd_power_down_a20(struct si476x_core *core,
> + struct si476x_power_down_args *pdargs)
> +{
> + u8 resp[CMD_POWER_DOWN_A20_NRESP];
> + const u8 args[CMD_POWER_DOWN_A20_NARGS] = {
> + pdargs->xosc,
> + };
> + return si476x_core_send_command(core, CMD_POWER_DOWN,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> +}
> +
> +static int si476x_core_cmd_am_tune_freq_a10(struct si476x_core *core,
> + struct si476x_tune_freq_args *tuneargs)
> +{
> +
> + const int am_freq = tuneargs->freq;
> + u8 resp[CMD_AM_TUNE_FREQ_NRESP];
> + const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
> + (tuneargs->hd << 6),
> + msb(am_freq),
> + lsb(am_freq),
> + };
> +
> + return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ, args,
> + sizeof(args),
> + resp, sizeof(resp));
> +}
> +
> +static int si476x_core_cmd_am_tune_freq_a20(struct si476x_core *core,
> + struct si476x_tune_freq_args *tuneargs)
> +{
> + const int am_freq = tuneargs->freq;
> + u8 resp[CMD_AM_TUNE_FREQ_NRESP];
> + const u8 args[CMD_AM_TUNE_FREQ_NARGS] = {
> + (tuneargs->zifsr << 6) | (tuneargs->injside & 0b11),
> + msb(am_freq),
> + lsb(am_freq),
> + };
> +
> + return si476x_cmd_tune_seek_freq(core, CMD_AM_TUNE_FREQ, args, sizeof(args),
> + resp, sizeof(resp));
> +}
> +
> +static int si476x_core_cmd_fm_rsq_status_a10(struct si476x_core *core,
> + struct si476x_rsq_status_args *rsqargs,
> + struct si476x_rsq_status_report *report)
> +{
> + int err;
> + u8 resp[CMD_FM_RSQ_STATUS_A10_NRESP];
> + const u8 args[CMD_FM_RSQ_STATUS_A10_NARGS] = {
> + rsqargs->rsqack << 3 | rsqargs->attune << 2 |
> + rsqargs->cancel << 1 | rsqargs->stcack,
> + };
> +
> + err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + /*
> + * Besides getting received signal quality information this
> + * command can be used to just acknowledge different interrupt
> + * flags in those cases it is useless to copy and parse
> + * received data so user can pass NULL, and thus avoid
> + * unnecessary copying.
> + */
> + if (err < 0 || report == NULL)
> + return err;
> +
> + report->multhint = 0b10000000 & resp[1];
> + report->multlint = 0b01000000 & resp[1];
> + report->snrhint = 0b00001000 & resp[1];
> + report->snrlint = 0b00000100 & resp[1];
> + report->rssihint = 0b00000010 & resp[1];
> + report->rssilint = 0b00000001 & resp[1];
> +
> + report->bltf = 0b10000000 & resp[2];
> + report->snr_ready = 0b00100000 & resp[2];
> + report->rssiready = 0b00001000 & resp[2];
> + report->afcrl = 0b00000010 & resp[2];
> + report->valid = 0b00000001 & resp[2];
> +
> + report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
> + report->freqoff = resp[5];
> + report->rssi = resp[6];
> + report->snr = resp[7];
> + report->lassi = resp[9];
> + report->hassi = resp[10];
> + report->mult = resp[11];
> + report->dev = resp[12];
> + report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
> + report->assi = resp[15];
> + report->usn = resp[16];
> +
> + return err;
> +}
> +
> +static int si476x_core_cmd_fm_rsq_status_a20(struct si476x_core *core,
> + struct si476x_rsq_status_args *rsqargs,
> + struct si476x_rsq_status_report *report)
> +{
> + int err;
> + u8 resp[CMD_FM_RSQ_STATUS_A10_NRESP];
> + const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
> + rsqargs->primary << 4 | rsqargs->rsqack << 3 |
> + rsqargs->attune << 2 | rsqargs->cancel << 1 |
> + rsqargs->stcack,
> + };
> +
> + err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + /*
> + * Besides getting received signal quality information this
> + * command can be used to just acknowledge different interrupt
> + * flags in those cases it is useless to copy and parse
> + * received data so user can pass NULL, and thus avoid
> + * unnecessary copying.
> + */
> + if (err < 0 || report == NULL)
> + return err;
> +
> + report->multhint = 0b10000000 & resp[1];
> + report->multlint = 0b01000000 & resp[1];
> + report->snrhint = 0b00001000 & resp[1];
> + report->snrlint = 0b00000100 & resp[1];
> + report->rssihint = 0b00000010 & resp[1];
> + report->rssilint = 0b00000001 & resp[1];
> +
> + report->bltf = 0b10000000 & resp[2];
> + report->snr_ready = 0b00100000 & resp[2];
> + report->rssiready = 0b00001000 & resp[2];
> + report->afcrl = 0b00000010 & resp[2];
> + report->valid = 0b00000001 & resp[2];
> +
> + report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
> + report->freqoff = resp[5];
> + report->rssi = resp[6];
> + report->snr = resp[7];
> + report->lassi = resp[9];
> + report->hassi = resp[10];
> + report->mult = resp[11];
> + report->dev = resp[12];
> + report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
> + report->assi = resp[15];
> + report->usn = resp[16];
> +
> + return err;
> +}
> +
> +
> +static int si476x_core_cmd_fm_rsq_status_a30(struct si476x_core *core,
> + struct si476x_rsq_status_args *rsqargs,
> + struct si476x_rsq_status_report *report)
> +{
> + int err;
> + u8 resp[CMD_FM_RSQ_STATUS_A30_NRESP];
> + const u8 args[CMD_FM_RSQ_STATUS_A30_NARGS] = {
> + rsqargs->primary << 4 | rsqargs->rsqack << 3 |
> + rsqargs->attune << 2 | rsqargs->cancel << 1 |
> + rsqargs->stcack,
> + };
> +
> + err = si476x_core_send_command(core, CMD_FM_RSQ_STATUS,
> + args, ARRAY_SIZE(args),
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + /*
> + * Besides getting received signal quality information this
> + * command can be used to just acknowledge different interrupt
> + * flags in those cases it is useless to copy and parse
> + * received data so user can pass NULL, and thus avoid
> + * unnecessary copying.
> + */
> + if (err < 0 || report == NULL)
> + return err;
> +
> + report->multhint = 0b10000000 & resp[1];
> + report->multlint = 0b01000000 & resp[1];
> + report->snrhint = 0b00001000 & resp[1];
> + report->snrlint = 0b00000100 & resp[1];
> + report->rssihint = 0b00000010 & resp[1];
> + report->rssilint = 0b00000001 & resp[1];
> +
> + report->bltf = 0b10000000 & resp[2];
> + report->snr_ready = 0b00100000 & resp[2];
> + report->rssiready = 0b00001000 & resp[2];
> + report->injside = 0b00000100 & resp[2];
> + report->afcrl = 0b00000010 & resp[2];
> + report->valid = 0b00000001 & resp[2];
> +
> + report->readfreq = be16_to_cpup((__be16 *)(resp + 3));
> + report->freqoff = resp[5];
> + report->rssi = resp[6];
> + report->snr = resp[7];
> + report->issi = resp[8];
> + report->lassi = resp[9];
> + report->hassi = resp[10];
> + report->mult = resp[11];
> + report->dev = resp[12];
> + report->readantcap = be16_to_cpup((__be16 *)(resp + 13));
> + report->assi = resp[15];
> + report->usn = resp[16];
> +
> + report->pilotdev = resp[17];
> + report->rdsdev = resp[18];
> + report->assidev = resp[19];
> + report->strongdev = resp[20];
> + report->rdspi = be16_to_cpup((__be16 *)(resp + 21));
> +
> + return err;
> +}
> +
> +static int si476x_core_cmd_fm_tune_freq_a10(struct si476x_core *core,
> + struct si476x_tune_freq_args *tuneargs)
> +{
> + u8 resp[CMD_FM_TUNE_FREQ_NRESP];
> + const u8 args[CMD_FM_TUNE_FREQ_A10_NARGS] = {
> + (tuneargs->hd << 6) | (tuneargs->tunemode << 4)
> + | (tuneargs->smoothmetrics << 2),
> + msb(tuneargs->freq),
> + lsb(tuneargs->freq),
> + msb(tuneargs->antcap),
> + lsb(tuneargs->antcap)
> + };
> +
> + return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ, args, sizeof(args),
> + resp, sizeof(resp));
> +}
> +
> +static int si476x_core_cmd_fm_tune_freq_a20(struct si476x_core *core,
> + struct si476x_tune_freq_args *tuneargs)
> +{
> + u8 resp[CMD_FM_TUNE_FREQ_NRESP];
> + const u8 args[CMD_FM_TUNE_FREQ_A20_NARGS] = {
> + (tuneargs->hd << 6) | (tuneargs->tunemode << 4)
> + | (tuneargs->smoothmetrics << 2) | (tuneargs->injside),
> + msb(tuneargs->freq),
> + lsb(tuneargs->freq),
> + };
> +
> + return si476x_cmd_tune_seek_freq(core, CMD_FM_TUNE_FREQ, args, sizeof(args),
> + resp, sizeof(resp));
> +}
> +
> +static int si476x_core_cmd_agc_status_a20(struct si476x_core *core,
> + struct si476x_agc_status_report *report)
> +{
> + int err;
> + u8 resp[CMD_AGC_STATUS_NRESP_A20];
> +
> + if (!report)
> + return -EINVAL;
> +
> + err = si476x_core_send_command(core, CMD_AGC_STATUS,
> + NULL, 0,
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + if (err < 0)
> + return err;
> +
> + report->mxhi = resp[1] & SI476X_AGC_MXHI;
> + report->mxlo = resp[1] & SI476X_AGC_MXLO;
> + report->lnahi = resp[1] & SI476X_AGC_LNAHI;
> + report->lnalo = resp[1] & SI476X_AGC_LNALO;
> + report->fmagc1 = resp[2];
> + report->fmagc2 = resp[3];
> + report->pgagain = resp[4];
> + report->fmwblang = resp[5];
> +
> + return err;
> +}
> +
> +static int si476x_core_cmd_agc_status_a10(struct si476x_core *core,
> + struct si476x_agc_status_report *report)
> +{
> + int err;
> + u8 resp[CMD_AGC_STATUS_NRESP_A10];
> +
> + if (!report)
> + return -EINVAL;
> +
> + err = si476x_core_send_command(core, CMD_AGC_STATUS,
> + NULL, 0,
> + resp, ARRAY_SIZE(resp),
> + SI476X_DEFAULT_TIMEOUT);
> + if (err < 0)
> + return err;
> +
> + report->mxhi = resp[1] & SI476X_AGC_MXHI;
> + report->mxlo = resp[1] & SI476X_AGC_MXLO;
> + report->lnahi = resp[1] & SI476X_AGC_LNAHI;
> + report->lnalo = resp[1] & SI476X_AGC_LNALO;
> +
> + return err;
> +}
> +
> +typedef int (*tune_freq_func_t) (struct si476x_core *core,
> + struct si476x_tune_freq_args *tuneargs);
> +
> +static struct {
> + int (*power_up) (struct si476x_core *,
> + struct si476x_power_up_args *);
> + int (*power_down) (struct si476x_core *,
> + struct si476x_power_down_args *);
> +
> + tune_freq_func_t fm_tune_freq;
> + tune_freq_func_t am_tune_freq;
> +
> + int (*fm_rsq_status)(struct si476x_core *,
> + struct si476x_rsq_status_args *,
> + struct si476x_rsq_status_report *);
> +
> + int (*agc_status)(struct si476x_core *,
> + struct si476x_agc_status_report *);
> + int (*intb_pin_cfg)(struct si476x_core *core,
> + enum si476x_intb_config intb,
> + enum si476x_a1_config a1);
> +} si476x_cmds_vtable[] = {
> + [SI476X_REVISION_A10] = {
> + .power_up = si476x_core_cmd_power_up_a10,
> + .power_down = si476x_core_cmd_power_down_a10,
> + .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a10,
> + .am_tune_freq = si476x_core_cmd_am_tune_freq_a10,
> + .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a10,
> + .agc_status = si476x_core_cmd_agc_status_a10,
> + .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a10,
> + },
> + [SI476X_REVISION_A20] = {
> + .power_up = si476x_core_cmd_power_up_a20,
> + .power_down = si476x_core_cmd_power_down_a20,
> + .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a20,
> + .am_tune_freq = si476x_core_cmd_am_tune_freq_a20,
> + .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a20,
> + .agc_status = si476x_core_cmd_agc_status_a20,
> + .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a20,
> + },
> + [SI476X_REVISION_A30] = {
> + .power_up = si476x_core_cmd_power_up_a20,
> + .power_down = si476x_core_cmd_power_down_a20,
> + .fm_tune_freq = si476x_core_cmd_fm_tune_freq_a20,
> + .am_tune_freq = si476x_core_cmd_am_tune_freq_a20,
> + .fm_rsq_status = si476x_core_cmd_fm_rsq_status_a30,
> + .agc_status = si476x_core_cmd_agc_status_a20,
> + .intb_pin_cfg = si476x_core_cmd_intb_pin_cfg_a20,
> + },
> +};
> +
> +int si476x_core_cmd_power_up(struct si476x_core *core,
> + struct si476x_power_up_args *args)
> +{
> + BUG_ON(core->revision > SI476X_REVISION_A30 ||
> + core->revision == -1);
> + return si476x_cmds_vtable[core->revision].power_up(core, args);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_power_up);
> +
> +int si476x_core_cmd_power_down(struct si476x_core *core,
> + struct si476x_power_down_args *args)
> +{
> + BUG_ON(core->revision > SI476X_REVISION_A30 ||
> + core->revision == -1);
> + return si476x_cmds_vtable[core->revision].power_down(core, args);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_power_down);
> +
> +int si476x_core_cmd_fm_tune_freq(struct si476x_core *core,
> + struct si476x_tune_freq_args *args)
> +{
> + BUG_ON(core->revision > SI476X_REVISION_A30 ||
> + core->revision == -1);
> + return si476x_cmds_vtable[core->revision].fm_tune_freq(core, args);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_tune_freq);
> +
> +int si476x_core_cmd_am_tune_freq(struct si476x_core *core,
> + struct si476x_tune_freq_args *args)
> +{
> + BUG_ON(core->revision > SI476X_REVISION_A30 ||
> + core->revision == -1);
> + return si476x_cmds_vtable[core->revision].am_tune_freq(core, args);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_am_tune_freq);
> +
> +int si476x_core_cmd_fm_rsq_status(struct si476x_core *core,
> + struct si476x_rsq_status_args *args,
> + struct si476x_rsq_status_report *report)
> +
> +{
> + BUG_ON(core->revision > SI476X_REVISION_A30 ||
> + core->revision == -1);
> + return si476x_cmds_vtable[core->revision].fm_rsq_status(core, args,
> + report);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_fm_rsq_status);
> +
> +int si476x_core_cmd_agc_status(struct si476x_core *core,
> + struct si476x_agc_status_report *report)
> +
> +{
> + BUG_ON(core->revision > SI476X_REVISION_A30 ||
> + core->revision == -1);
> + return si476x_cmds_vtable[core->revision].agc_status(core, report);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_agc_status);
> +
> +int si476x_core_cmd_intb_pin_cfg(struct si476x_core *core,
> + enum si476x_intb_config intb,
> + enum si476x_a1_config a1)
> +{
> + BUG_ON(core->revision > SI476X_REVISION_A30 ||
> + core->revision == -1);
> +
> + return si476x_cmds_vtable[core->revision].intb_pin_cfg(core, intb, a1);
> +}
> +EXPORT_SYMBOL_GPL(si476x_core_cmd_intb_pin_cfg);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
> +MODULE_DESCRIPTION("API for command exchange for si476x");
--
Cheers,
Mauro
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: [PATCH v7 1/9] mfd: Add commands abstraction layer for SI476X MFD
2013-03-18 20:11 ` Mauro Carvalho Chehab
@ 2013-03-20 1:10 ` Andrey Smirnov
0 siblings, 0 replies; 13+ messages in thread
From: Andrey Smirnov @ 2013-03-20 1:10 UTC (permalink / raw)
To: Mauro Carvalho Chehab; +Cc: Hans Verkuil, sameo, sam, linux-media, linux-kernel
On Mon, Mar 18, 2013 at 1:11 PM, Mauro Carvalho Chehab
<mchehab@redhat.com> wrote:
> Em Tue, 26 Feb 2013 22:06:45 -0800
> Andrey Smirnov <andrew.smirnov@gmail.com> escreveu:
>
>> This patch adds all the functions used for exchanging commands with
>> the chip.
>
> Please run checkpatch.pl over those patches. There are a number of compliants
> on those patches:
>
OK, will do shortly and send updated patch-set.
> WARNING: line over 80 characters
> #328: FILE: drivers/mfd/si476x-cmd.c:298:
> + err = si476x_core_i2c_xfer(core, SI476X_I2C_SEND, (char *) data, argn + 1);
>
> WARNING: line over 80 characters
> #378: FILE: drivers/mfd/si476x-cmd.c:348:
> + dev_err(&core->client->dev, "[CMD 0x%02x] Chip set error flag\n", command);
>
I do have a question about this particular warning though. Weird
indentation that I had to use in order to calm checkpatch.pl about
that issue has been a topic of discussion and complaints once
already(see https://lkml.org/lkml/2012/9/21/67) To my understanding
the consensus was as far as it improves readability > 80 character
lines are OK. What would you like me do with those extra long lines
ignore all/fix all/use discretion and fix some?
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v7 2/9] mfd: Add the main bulk of core driver for SI476x code
2013-02-27 6:06 [PATCH v7 0/9] Driver for Si476x series of chips Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 1/9] mfd: Add commands abstraction layer for SI476X MFD Andrey Smirnov
@ 2013-02-27 6:06 ` Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 3/9] mfd: Add chip properties handling code for SI476X MFD Andrey Smirnov
` (6 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Andrey Smirnov @ 2013-02-27 6:06 UTC (permalink / raw)
To: mchehab; +Cc: andrew.smirnov, hverkuil, sameo, sam, linux-media, linux-kernel
This patch adds main part(out of three) of the I2C driver for the
"core" of MFD device.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/mfd/si476x-i2c.c | 878 ++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 878 insertions(+)
create mode 100644 drivers/mfd/si476x-i2c.c
diff --git a/drivers/mfd/si476x-i2c.c b/drivers/mfd/si476x-i2c.c
new file mode 100644
index 0000000..053a6a3
--- /dev/null
+++ b/drivers/mfd/si476x-i2c.c
@@ -0,0 +1,878 @@
+/*
+ * drivers/mfd/si476x-i2c.c -- Core device driver for si476x MFD
+ * device
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+#include <linux/module.h>
+
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/regulator/consumer.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+
+#include <linux/mfd/si476x-core.h>
+
+#define SI476X_MAX_IO_ERRORS 10
+#define SI476X_DRIVER_RDS_FIFO_DEPTH 128
+
+/**
+ * si476x_core_config_pinmux() - pin function configuration function
+ *
+ * @core: Core device structure
+ *
+ * Configure the functions of the pins of the radio chip.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+static int si476x_core_config_pinmux(struct si476x_core *core)
+{
+ int err;
+ dev_dbg(&core->client->dev, "Configuring pinmux\n");
+ err = si476x_core_cmd_dig_audio_pin_cfg(core,
+ core->pinmux.dclk,
+ core->pinmux.dfs,
+ core->pinmux.dout,
+ core->pinmux.xout);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure digital audio pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ err = si476x_core_cmd_zif_pin_cfg(core,
+ core->pinmux.iqclk,
+ core->pinmux.iqfs,
+ core->pinmux.iout,
+ core->pinmux.qout);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure ZIF pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ err = si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(core,
+ core->pinmux.icin,
+ core->pinmux.icip,
+ core->pinmux.icon,
+ core->pinmux.icop);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure IC-Link/GPO pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ err = si476x_core_cmd_ana_audio_pin_cfg(core,
+ core->pinmux.lrout);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure analog audio pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ err = si476x_core_cmd_intb_pin_cfg(core,
+ core->pinmux.intb,
+ core->pinmux.a1);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure interrupt pins(err = %d)\n",
+ err);
+ return err;
+ }
+
+ return 0;
+}
+
+static inline void si476x_core_schedule_polling_work(struct si476x_core *core)
+{
+ schedule_delayed_work(&core->status_monitor,
+ usecs_to_jiffies(SI476X_STATUS_POLL_US));
+}
+
+/**
+ * si476x_core_start() - early chip startup function
+ * @core: Core device structure
+ * @soft: When set, this flag forces "soft" startup, where "soft"
+ * power down is the one done by sending appropriate command instead
+ * of using reset pin of the tuner
+ *
+ * Perform required startup sequence to correctly power
+ * up the chip and perform initial configuration. It does the
+ * following sequence of actions:
+ * 1. Claims and enables the power supplies VD and VIO1 required
+ * for I2C interface of the chip operation.
+ * 2. Waits for 100us, pulls the reset line up, enables irq,
+ * waits for another 100us as it is specified by the
+ * datasheet.
+ * 3. Sends 'POWER_UP' command to the device with all provided
+ * information about power-up parameters.
+ * 4. Configures, pin multiplexor, disables digital audio and
+ * configures interrupt sources.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+int si476x_core_start(struct si476x_core *core, bool soft)
+{
+ struct i2c_client *client = core->client;
+ int err;
+
+ if (!soft) {
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_set_value_cansleep(core->gpio_reset, 1);
+
+ if (client->irq)
+ enable_irq(client->irq);
+
+ udelay(100);
+
+ if (!client->irq) {
+ atomic_set(&core->is_alive, 1);
+ si476x_core_schedule_polling_work(core);
+ }
+ } else {
+ if (client->irq)
+ enable_irq(client->irq);
+ else {
+ atomic_set(&core->is_alive, 1);
+ si476x_core_schedule_polling_work(core);
+ }
+ }
+
+ err = si476x_core_cmd_power_up(core,
+ &core->power_up_parameters);
+
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Power up failure(err = %d)\n",
+ err);
+ goto disable_irq;
+ }
+
+ if (client->irq)
+ atomic_set(&core->is_alive, 1);
+
+ err = si476x_core_config_pinmux(core);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure pinmux(err = %d)\n",
+ err);
+ goto disable_irq;
+ }
+
+ if (client->irq) {
+ err = regmap_write(core->regmap,
+ SI476X_PROP_INT_CTL_ENABLE,
+ SI476X_RDSIEN |
+ SI476X_STCIEN |
+ SI476X_CTSIEN);
+ if (err < 0) {
+ dev_err(&core->client->dev,
+ "Failed to configure interrupt sources"
+ "(err = %d)\n", err);
+ goto disable_irq;
+ }
+ }
+
+ return 0;
+
+disable_irq:
+ if (err == -ENODEV)
+ atomic_set(&core->is_alive, 0);
+
+ if (client->irq)
+ disable_irq(client->irq);
+ else
+ cancel_delayed_work_sync(&core->status_monitor);
+
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_set_value_cansleep(core->gpio_reset, 0);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_start);
+
+/**
+ * si476x_core_stop() - chip power-down function
+ * @core: Core device structure
+ * @soft: When set, function sends a POWER_DOWN command instead of
+ * bringing reset line low
+ *
+ * Power down the chip by performing following actions:
+ * 1. Disable IRQ or stop the polling worker
+ * 2. Send the POWER_DOWN command if the power down is soft or bring
+ * reset line low if not.
+ *
+ * The function returns zero in case of succes or negative error code
+ * otherwise.
+ */
+int si476x_core_stop(struct si476x_core *core, bool soft)
+{
+ int err = 0;
+ atomic_set(&core->is_alive, 0);
+
+ if (soft) {
+ /* TODO: This probably shoud be a configurable option,
+ * so it is possible to have the chips keep their
+ * oscillators running
+ */
+ struct si476x_power_down_args args = {
+ .xosc = false,
+ };
+ err = si476x_core_cmd_power_down(core, &args);
+ }
+
+ /* We couldn't disable those before
+ * 'si476x_core_cmd_power_down' since we expect to get CTS
+ * interrupt */
+ if (core->client->irq)
+ disable_irq(core->client->irq);
+ else
+ cancel_delayed_work_sync(&core->status_monitor);
+
+ if (!soft) {
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_set_value_cansleep(core->gpio_reset, 0);
+ }
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_stop);
+
+/**
+ * si476x_core_set_power_state() - set the level at which the power is
+ * supplied for the chip.
+ * @core: Core device structure
+ * @next_state: enum si476x_power_state describing power state to
+ * switch to.
+ *
+ * Switch on all the required power supplies
+ *
+ * This function returns 0 in case of suvccess and negative error code
+ * otherwise.
+ */
+int si476x_core_set_power_state(struct si476x_core *core,
+ enum si476x_power_state next_state)
+{
+ /*
+ It is not clear form the datasheet if it is possible to
+ work with device if not all power domains are operational.
+ So for now the power-up policy is "power-up all the things!"
+ */
+ int err = 0;
+
+ if (core->power_state == SI476X_POWER_INCONSISTENT) {
+ dev_err(&core->client->dev,
+ "The device in inconsistent power state\n");
+ return -EINVAL;
+ }
+
+ if (next_state != core->power_state) {
+ switch (next_state) {
+ case SI476X_POWER_UP_FULL:
+ err = regulator_bulk_enable(ARRAY_SIZE(core->supplies),
+ core->supplies);
+ if (err < 0) {
+ core->power_state = SI476X_POWER_INCONSISTENT;
+ break;
+ }
+ /*
+ * Startup timing diagram recommends to have a
+ * 100 us delay between enabling of the power
+ * supplies and turning the tuner on.
+ */
+ udelay(100);
+
+ err = si476x_core_start(core, false);
+ if (err < 0)
+ goto disable_regulators;
+
+ core->power_state = next_state;
+ break;
+
+ case SI476X_POWER_DOWN:
+ core->power_state = next_state;
+ err = si476x_core_stop(core, false);
+ if (err < 0)
+ core->power_state = SI476X_POWER_INCONSISTENT;
+disable_regulators:
+ err = regulator_bulk_disable(ARRAY_SIZE(core->supplies),
+ core->supplies);
+ if (err < 0)
+ core->power_state = SI476X_POWER_INCONSISTENT;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_set_power_state);
+
+/**
+ * si476x_core_report_drainer_stop() - mark the completion of the RDS
+ * buffer drain porcess by the worker.
+ *
+ * @core: Core device structure
+ */
+static inline void si476x_core_report_drainer_stop(struct si476x_core *core)
+{
+ mutex_lock(&core->rds_drainer_status_lock);
+ core->rds_drainer_is_working = false;
+ mutex_unlock(&core->rds_drainer_status_lock);
+}
+
+/**
+ * si476x_core_start_rds_drainer_once() - start RDS drainer worker if
+ * ther is none working, do nothing otherwise
+ *
+ * @core: Datastructure corresponding to the chip.
+ */
+static inline void si476x_core_start_rds_drainer_once(struct si476x_core *core)
+{
+ mutex_lock(&core->rds_drainer_status_lock);
+ if (!core->rds_drainer_is_working) {
+ core->rds_drainer_is_working = true;
+ schedule_work(&core->rds_fifo_drainer);
+ }
+ mutex_unlock(&core->rds_drainer_status_lock);
+}
+/**
+ * si476x_drain_rds_fifo() - RDS buffer drainer.
+ * @work: struct work_struct being ppassed to the function by the
+ * kernel.
+ *
+ * Drain the contents of the RDS FIFO of
+ */
+static void si476x_core_drain_rds_fifo(struct work_struct *work)
+{
+ int err;
+
+ struct si476x_core *core = container_of(work, struct si476x_core,
+ rds_fifo_drainer);
+
+ struct si476x_rds_status_report report;
+
+ si476x_core_lock(core);
+ err = si476x_core_cmd_fm_rds_status(core, true, false, false, &report);
+ if (!err) {
+ int i = report.rdsfifoused;
+ dev_dbg(&core->client->dev,
+ "%d elements in RDS FIFO. Draining.\n", i);
+ for (; i > 0; --i) {
+ err = si476x_core_cmd_fm_rds_status(core, false, false,
+ (i == 1), &report);
+ if (err < 0)
+ goto unlock;
+
+ kfifo_in(&core->rds_fifo, report.rds,
+ sizeof(report.rds));
+ dev_dbg(&core->client->dev, "RDS data:\n %*ph\n",
+ sizeof(report.rds), report.rds);
+ }
+ dev_dbg(&core->client->dev, "Drrrrained!\n");
+ wake_up_interruptible(&core->rds_read_queue);
+ }
+
+unlock:
+ si476x_core_unlock(core);
+ si476x_core_report_drainer_stop(core);
+}
+
+/**
+ * si476x_core_pronounce_dead()
+ *
+ * @core: Core device structure
+ *
+ * Mark the device as being dead and wake up all potentially waiting
+ * threads of execution.
+ *
+ */
+static void si476x_core_pronounce_dead(struct si476x_core *core)
+{
+ dev_info(&core->client->dev, "Core device is dead.\n");
+
+ atomic_set(&core->is_alive, 0);
+
+ /* Wake up al possible waiting processes */
+ wake_up_interruptible(&core->rds_read_queue);
+
+ atomic_set(&core->cts, 1);
+ wake_up(&core->command);
+
+ atomic_set(&core->stc, 1);
+ wake_up(&core->tuning);
+}
+
+/**
+ * si476x_core_i2c_xfer()
+ *
+ * @core: Core device structure
+ * @type: Transfer type
+ * @buf: Transfer buffer for/with data
+ * @count: Transfer buffer size
+ *
+ * Perfrom and I2C transfer(either read or write) and keep a counter
+ * of I/O errors. If the error counter rises above the threshold
+ * pronounce device dead.
+ *
+ * The function returns zero on succes or negative error code on
+ * failure.
+ */
+int si476x_core_i2c_xfer(struct si476x_core *core,
+ enum si476x_i2c_type type,
+ char *buf, int count)
+{
+ static int io_errors_count;
+ int err;
+ if (type == SI476X_I2C_SEND)
+ err = i2c_master_send(core->client, buf, count);
+ else
+ err = i2c_master_recv(core->client, buf, count);
+
+ if (err < 0) {
+ if (io_errors_count++ > SI476X_MAX_IO_ERRORS)
+ si476x_core_pronounce_dead(core);
+ } else {
+ io_errors_count = 0;
+ }
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(si476x_core_i2c_xfer);
+
+/**
+ * si476x_get_status()
+ * @core: Core device structure
+ *
+ * Get the status byte of the core device by berforming one byte I2C
+ * read.
+ *
+ * The function returns a status value or a negative error code on
+ * error.
+ */
+static int si476x_core_get_status(struct si476x_core *core)
+{
+ u8 response;
+ int err = si476x_core_i2c_xfer(core, SI476X_I2C_RECV,
+ &response, sizeof(response));
+
+ return (err < 0) ? err : response;
+}
+
+/**
+ * si476x_get_and_signal_status() - IRQ dispatcher
+ * @core: Core device structure
+ *
+ * Dispatch the arrived interrupt request based on the value of the
+ * status byte reported by the tuner.
+ *
+ */
+static void si476x_core_get_and_signal_status(struct si476x_core *core)
+{
+ int status = si476x_core_get_status(core);
+ if (status < 0) {
+ dev_err(&core->client->dev, "Failed to get status\n");
+ return;
+ }
+
+ if (status & SI476X_CTS) {
+ /* Unfortunately completions could not be used for
+ * signalling CTS since this flag cannot be cleared
+ * in status byte, and therefore once it becomes true
+ * multiple calls to 'complete' would cause the
+ * commands following the current one to be completed
+ * before they actually are */
+ dev_dbg(&core->client->dev, "[interrupt] CTSINT\n");
+ atomic_set(&core->cts, 1);
+ wake_up(&core->command);
+ }
+
+ if (status & SI476X_FM_RDS_INT) {
+ dev_dbg(&core->client->dev, "[interrupt] RDSINT\n");
+ si476x_core_start_rds_drainer_once(core);
+ }
+
+ if (status & SI476X_STC_INT) {
+ dev_dbg(&core->client->dev, "[interrupt] STCINT\n");
+ atomic_set(&core->stc, 1);
+ wake_up(&core->tuning);
+ }
+}
+
+static void si476x_core_poll_loop(struct work_struct *work)
+{
+ struct si476x_core *core = SI476X_WORK_TO_CORE(work);
+
+ si476x_core_get_and_signal_status(core);
+
+ if (atomic_read(&core->is_alive))
+ si476x_core_schedule_polling_work(core);
+}
+
+static irqreturn_t si476x_core_interrupt(int irq, void *dev)
+{
+ struct si476x_core *core = dev;
+
+ si476x_core_get_and_signal_status(core);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * si476x_firmware_version_to_revision()
+ * @core: Core device structure
+ * @major: Firmware major number
+ * @minor1: Firmware first minor number
+ * @minor2: Firmware second minor number
+ *
+ * Convert a chip's firmware version number into an offset that later
+ * will be used to as offset in "vtable" of tuner functions
+ *
+ * This function returns a positive offset in case of success and a -1
+ * in case of failure.
+ */
+static inline int si476x_core_firmware_version_to_revision(struct si476x_core *core,
+ int func, int major,
+ int minor1, int minor2)
+{
+ switch (func) {
+ case SI476X_FUNC_FM_RECEIVER:
+ switch (major) {
+ case 5:
+ return SI476X_REVISION_A10;
+ case 8:
+ return SI476X_REVISION_A20;
+ case 10:
+ return SI476X_REVISION_A30;
+ default:
+ goto unknown_revision;
+ }
+ case SI476X_FUNC_AM_RECEIVER:
+ switch (major) {
+ case 5:
+ return SI476X_REVISION_A10;
+ case 7:
+ return SI476X_REVISION_A20;
+ case 9:
+ return SI476X_REVISION_A30;
+ default:
+ goto unknown_revision;
+ }
+ case SI476X_FUNC_WB_RECEIVER:
+ switch (major) {
+ case 3:
+ return SI476X_REVISION_A10;
+ case 5:
+ return SI476X_REVISION_A20;
+ case 7:
+ return SI476X_REVISION_A30;
+ default:
+ goto unknown_revision;
+ }
+ case SI476X_FUNC_BOOTLOADER:
+ default: /* FALLTHROUG */
+ BUG();
+ return -1;
+ }
+
+unknown_revision:
+ dev_err(&core->client->dev,
+ "Unsupported version of the firmware: %d.%d.%d, "
+ "reverting to A10 comptible functions\n",
+ major, minor1, minor2);
+
+ return SI476X_REVISION_A10;
+}
+
+/**
+ * si476x_get_revision_info()
+ * @core: Core device structure
+ *
+ * Get the firmware version number of the device. It is done in
+ * following three steps:
+ * 1. Power-up the device
+ * 2. Send the 'FUNC_INFO' command
+ * 3. Powering the device down.
+ *
+ * The function return zero on success and a negative error code on
+ * failure.
+ */
+static int si476x_core_get_revision_info(struct si476x_core *core)
+{
+ int rval;
+ struct si476x_func_info info;
+
+ si476x_core_lock(core);
+ rval = si476x_core_set_power_state(core, SI476X_POWER_UP_FULL);
+ if (!rval) {
+ rval = si476x_core_cmd_func_info(core, &info);
+ if (!rval)
+ core->revision = si476x_core_firmware_version_to_revision(core, info.func,
+ info.firmware.major,
+ info.firmware.minor[0],
+ info.firmware.minor[1]);
+ si476x_core_set_power_state(core, SI476X_POWER_DOWN);
+ }
+ si476x_core_unlock(core);
+
+ return rval;
+}
+
+bool si476x_core_has_am(struct si476x_core *core)
+{
+ return core->chip_id == SI476X_CHIP_SI4761 ||
+ core->chip_id == SI476X_CHIP_SI4764;
+}
+EXPORT_SYMBOL_GPL(si476x_core_has_am);
+
+bool si476x_core_has_diversity(struct si476x_core *core)
+{
+ return core->chip_id == SI476X_CHIP_SI4764;
+}
+EXPORT_SYMBOL_GPL(si476x_core_has_diversity);
+
+bool si476x_core_is_a_secondary_tuner(struct si476x_core *core)
+{
+ return si476x_core_has_diversity(core) &&
+ (core->diversity_mode == SI476X_PHDIV_SECONDARY_ANTENNA ||
+ core->diversity_mode == SI476X_PHDIV_SECONDARY_COMBINING);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_a_secondary_tuner);
+
+bool si476x_core_is_a_primary_tuner(struct si476x_core *core)
+{
+ return si476x_core_has_diversity(core) &&
+ (core->diversity_mode == SI476X_PHDIV_PRIMARY_ANTENNA ||
+ core->diversity_mode == SI476X_PHDIV_PRIMARY_COMBINING);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_a_primary_tuner);
+
+bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core)
+{
+ return si476x_core_has_am(core) &&
+ (core->power_up_parameters.func == SI476X_FUNC_AM_RECEIVER);
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_in_am_receiver_mode);
+
+bool si476x_core_is_powered_up(struct si476x_core *core)
+{
+ return core->power_state == SI476X_POWER_UP_FULL;
+}
+EXPORT_SYMBOL_GPL(si476x_core_is_powered_up);
+
+static int si476x_core_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int rval;
+ struct si476x_core *core;
+ struct si476x_platform_data *pdata;
+ struct mfd_cell *cell;
+ int cell_num;
+
+ core = devm_kzalloc(&client->dev, sizeof(*core), GFP_KERNEL);
+ if (!core) {
+ dev_err(&client->dev, "failed to allocate 'struct si476x_core'\n");
+ return -ENOMEM;
+ }
+ core->client = client;
+
+ core->regmap = devm_regmap_init_si476x(core);
+ if (IS_ERR(core->regmap)) {
+ rval = PTR_ERR(core->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ rval);
+ return rval;
+ }
+
+ i2c_set_clientdata(client, core);
+
+ atomic_set(&core->is_alive, 0);
+ core->power_state = SI476X_POWER_DOWN;
+
+ pdata = client->dev.platform_data;
+ if (pdata) {
+ memcpy(&core->power_up_parameters,
+ &pdata->power_up_parameters,
+ sizeof(core->power_up_parameters));
+
+ core->gpio_reset = -1;
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ rval = gpio_request(pdata->gpio_reset, "si476x reset");
+ if (rval) {
+ dev_err(&client->dev,
+ "Failed to request gpio: %d\n", rval);
+ return rval;
+ }
+ core->gpio_reset = pdata->gpio_reset;
+ gpio_direction_output(core->gpio_reset, 0);
+ }
+
+ core->diversity_mode = pdata->diversity_mode;
+ memcpy(&core->pinmux, &pdata->pinmux,
+ sizeof(struct si476x_pinmux));
+ } else {
+ dev_err(&client->dev, "No platform data provided\n");
+ return -EINVAL;
+ }
+
+ core->supplies[0].supply = "vd";
+ core->supplies[1].supply = "va";
+ core->supplies[2].supply = "vio1";
+ core->supplies[3].supply = "vio2";
+
+ rval = devm_regulator_bulk_get(&client->dev,
+ ARRAY_SIZE(core->supplies),
+ core->supplies);
+ if (rval) {
+ dev_err(&client->dev, "Failet to gett all of the regulators\n");
+ goto free_gpio;
+ }
+
+ mutex_init(&core->cmd_lock);
+ init_waitqueue_head(&core->command);
+ init_waitqueue_head(&core->tuning);
+
+ rval = kfifo_alloc(&core->rds_fifo,
+ SI476X_DRIVER_RDS_FIFO_DEPTH * \
+ sizeof(struct v4l2_rds_data),
+ GFP_KERNEL);
+ if (rval) {
+ dev_err(&client->dev, "Could not alloate the FIFO\n");
+ goto free_gpio;
+ }
+ mutex_init(&core->rds_drainer_status_lock);
+ init_waitqueue_head(&core->rds_read_queue);
+ INIT_WORK(&core->rds_fifo_drainer, si476x_core_drain_rds_fifo);
+
+ if (client->irq) {
+ rval = devm_request_threaded_irq(&client->dev,
+ client->irq, NULL, si476x_core_interrupt,
+ IRQF_TRIGGER_FALLING,
+ client->name, core);
+ if (rval < 0) {
+ dev_err(&client->dev, "Could not request IRQ %d\n",
+ client->irq);
+ goto free_kfifo;
+ }
+ disable_irq(client->irq);
+ dev_dbg(&client->dev, "IRQ requested.\n");
+
+ core->rds_fifo_depth = 20;
+ } else {
+ INIT_DELAYED_WORK(&core->status_monitor,
+ si476x_core_poll_loop);
+ dev_info(&client->dev,
+ "No IRQ number specified, will use polling\n");
+
+ core->rds_fifo_depth = 5;
+ }
+
+ core->chip_id = id->driver_data;
+
+ rval = si476x_core_get_revision_info(core);
+ if (rval < 0) {
+ rval = -ENODEV;
+ goto free_kfifo;
+ }
+
+ cell_num = 0;
+
+ cell = &core->cells[SI476X_RADIO_CELL];
+ cell->name = "si476x-radio";
+ cell_num++;
+
+#ifdef CONFIG_SND_SOC_SI476X
+ if ((core->chip_id == SI476X_CHIP_SI4761 ||
+ core->chip_id == SI476X_CHIP_SI4764) &&
+ core->pinmux.dclk == SI476X_DCLK_DAUDIO &&
+ core->pinmux.dfs == SI476X_DFS_DAUDIO &&
+ core->pinmux.dout == SI476X_DOUT_I2S_OUTPUT &&
+ core->pinmux.xout == SI476X_XOUT_TRISTATE) {
+ cell = &core->cells[SI476X_CODEC_CELL];
+ cell->name = "si476x-codec";
+ cell_num++;
+ }
+#endif
+ rval = mfd_add_devices(&client->dev,
+ (client->adapter->nr << 8) + client->addr,
+ core->cells, cell_num,
+ NULL, 0, NULL);
+ if (!rval)
+ return 0;
+
+free_kfifo:
+ kfifo_free(&core->rds_fifo);
+
+free_gpio:
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_free(core->gpio_reset);
+
+ return rval;
+}
+
+static int si476x_core_remove(struct i2c_client *client)
+{
+ struct si476x_core *core = i2c_get_clientdata(client);
+
+ si476x_core_pronounce_dead(core);
+ mfd_remove_devices(&client->dev);
+
+ if (client->irq)
+ disable_irq(client->irq);
+ else
+ cancel_delayed_work_sync(&core->status_monitor);
+
+ kfifo_free(&core->rds_fifo);
+
+ if (gpio_is_valid(core->gpio_reset))
+ gpio_free(core->gpio_reset);
+
+ return 0;
+}
+
+
+static const struct i2c_device_id si476x_id[] = {
+ { "si4761", SI476X_CHIP_SI4761 },
+ { "si4764", SI476X_CHIP_SI4764 },
+ { "si4768", SI476X_CHIP_SI4768 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, si476x_id);
+
+static struct i2c_driver si476x_core_driver = {
+ .driver = {
+ .name = "si476x-core",
+ .owner = THIS_MODULE,
+ },
+ .probe = si476x_core_probe,
+ .remove = si476x_core_remove,
+ .id_table = si476x_id,
+};
+module_i2c_driver(si476x_core_driver);
+
+
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("Si4761/64/68 AM/FM MFD core device driver");
+MODULE_LICENSE("GPL");
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 3/9] mfd: Add chip properties handling code for SI476X MFD
2013-02-27 6:06 [PATCH v7 0/9] Driver for Si476x series of chips Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 1/9] mfd: Add commands abstraction layer for SI476X MFD Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 2/9] mfd: Add the main bulk of core driver for SI476x code Andrey Smirnov
@ 2013-02-27 6:06 ` Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 4/9] mfd: Add header files and Kbuild plumbing for SI476x MFD core Andrey Smirnov
` (5 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Andrey Smirnov @ 2013-02-27 6:06 UTC (permalink / raw)
To: mchehab; +Cc: andrew.smirnov, hverkuil, sameo, sam, linux-media, linux-kernel
This patch adds code related to manipulation of the properties of
SI476X chips.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/mfd/si476x-prop.c | 234 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 234 insertions(+)
create mode 100644 drivers/mfd/si476x-prop.c
diff --git a/drivers/mfd/si476x-prop.c b/drivers/mfd/si476x-prop.c
new file mode 100644
index 0000000..d2b5cc0
--- /dev/null
+++ b/drivers/mfd/si476x-prop.c
@@ -0,0 +1,234 @@
+/*
+ * drivers/mfd/si476x-prop.c -- Subroutines to manipulate with
+ * properties of si476x chips
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <linux/module.h>
+
+#include <media/si476x.h>
+#include <linux/mfd/si476x-core.h>
+
+struct si476x_property_range {
+ u16 low, high;
+};
+
+static bool si476x_core_element_is_in_array(u16 element, const u16 array[], size_t size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ if (element == array[i])
+ return true;
+
+ return false;
+}
+
+static bool si476x_core_element_is_in_range(u16 element,
+ const struct si476x_property_range range[],
+ size_t size)
+{
+ int i;
+
+ for (i = 0; i < size; i++)
+ if (element <= range[i].high && element >= range[i].low)
+ return true;
+
+ return false;
+}
+
+static bool si476x_core_is_valid_property_a10(struct si476x_core *core,
+ u16 property)
+{
+ static const u16 valid_properties[] = {
+ 0x0000,
+ 0x0500, 0x0501,
+ 0x0600,
+ 0x0709, 0x070C, 0x070D, 0x70E, 0x710,
+ 0x0718,
+ 0x1207, 0x1208,
+ 0x2007,
+ 0x2300,
+ };
+
+ static const struct si476x_property_range valid_ranges[] = {
+ { 0x0200, 0x0203 },
+ { 0x0300, 0x0303 },
+ { 0x0400, 0x0404 },
+ { 0x0700, 0x0707 },
+ { 0x1100, 0x1102 },
+ { 0x1200, 0x1204 },
+ { 0x1300, 0x1306 },
+ { 0x2000, 0x2005 },
+ { 0x2100, 0x2104 },
+ { 0x2106, 0x2106 },
+ { 0x2200, 0x220E },
+ { 0x3100, 0x3104 },
+ { 0x3207, 0x320F },
+ { 0x3300, 0x3304 },
+ { 0x3500, 0x3517 },
+ { 0x3600, 0x3617 },
+ { 0x3700, 0x3717 },
+ { 0x4000, 0x4003 },
+ };
+
+ return si476x_core_element_is_in_range(property, valid_ranges,
+ ARRAY_SIZE(valid_ranges)) ||
+ si476x_core_element_is_in_array(property, valid_properties,
+ ARRAY_SIZE(valid_properties));
+}
+
+static bool si476x_core_is_valid_property_a20(struct si476x_core *core,
+ u16 property)
+{
+ static const u16 valid_properties[] = {
+ 0x071B,
+ 0x1006,
+ 0x2210,
+ 0x3401,
+ };
+
+ static const struct si476x_property_range valid_ranges[] = {
+ { 0x2215, 0x2219 },
+ };
+
+ return si476x_core_is_valid_property_a10(core, property) ||
+ si476x_core_element_is_in_range(property, valid_ranges,
+ ARRAY_SIZE(valid_ranges)) ||
+ si476x_core_element_is_in_array(property, valid_properties,
+ ARRAY_SIZE(valid_properties));
+}
+
+static bool si476x_core_is_valid_property_a30(struct si476x_core *core,
+ u16 property)
+{
+ static const u16 valid_properties[] = {
+ 0x071C, 0x071D,
+ 0x1007, 0x1008,
+ 0x220F, 0x2214,
+ 0x2301,
+ 0x3105, 0x3106,
+ 0x3402,
+ };
+
+ static const struct si476x_property_range valid_ranges[] = {
+ { 0x0405, 0x0411 },
+ { 0x2008, 0x200B },
+ { 0x2220, 0x2223 },
+ { 0x3100, 0x3106 },
+ };
+
+ return si476x_core_is_valid_property_a20(core, property) ||
+ si476x_core_element_is_in_range(property, valid_ranges,
+ ARRAY_SIZE(valid_ranges)) ||
+ si476x_core_element_is_in_array(property, valid_properties,
+ ARRAY_SIZE(valid_properties));
+}
+
+typedef bool (*valid_property_pred_t) (struct si476x_core *, u16);
+
+static bool si476x_core_is_valid_property(struct si476x_core *core, u16 property)
+{
+ static const valid_property_pred_t is_valid_property[] = {
+ [SI476X_REVISION_A10] = si476x_core_is_valid_property_a10,
+ [SI476X_REVISION_A20] = si476x_core_is_valid_property_a20,
+ [SI476X_REVISION_A30] = si476x_core_is_valid_property_a30,
+ };
+
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+ return is_valid_property[core->revision](core, property);
+}
+
+
+static bool si476x_core_is_readonly_property(struct si476x_core *core, u16 property)
+{
+ BUG_ON(core->revision > SI476X_REVISION_A30 ||
+ core->revision == -1);
+
+ switch (core->revision) {
+ case SI476X_REVISION_A10:
+ return (property == 0x3200);
+ case SI476X_REVISION_A20:
+ return (property == 0x1006 ||
+ property == 0x2210 ||
+ property == 0x3200);
+ case SI476X_REVISION_A30:
+ return false;
+ }
+
+ return false;
+}
+
+static bool si476x_core_regmap_readable_register(struct device *dev, unsigned int reg)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct si476x_core *core = i2c_get_clientdata(client);
+
+ return si476x_core_is_valid_property(core, (u16) reg);
+
+}
+
+static bool si476x_core_regmap_writable_register(struct device *dev, unsigned int reg)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct si476x_core *core = i2c_get_clientdata(client);
+
+ return si476x_core_is_valid_property(core, (u16) reg) &&
+ !si476x_core_is_readonly_property(core, (u16) reg);
+}
+
+
+static int si476x_core_regmap_write(void *context, unsigned int reg, unsigned int val)
+{
+ return si476x_core_cmd_set_property(context, reg, val);
+}
+
+static int si476x_core_regmap_read(void *context, unsigned int reg, unsigned *val)
+{
+ struct si476x_core *core = context;
+ int err;
+
+ err = si476x_core_cmd_get_property(core, reg);
+ if (err < 0)
+ return err;
+
+ *val = err;
+
+ return 0;
+}
+
+
+static const struct regmap_config si476x_regmap_config = {
+ .reg_bits = 16,
+ .val_bits = 16,
+
+ .max_register = 0x4003,
+
+ .writeable_reg = si476x_core_regmap_writable_register,
+ .readable_reg = si476x_core_regmap_readable_register,
+
+ .reg_read = si476x_core_regmap_read,
+ .reg_write = si476x_core_regmap_write,
+
+ .cache_type = REGCACHE_RBTREE,
+};
+
+struct regmap *devm_regmap_init_si476x(struct si476x_core *core)
+{
+ return devm_regmap_init(&core->client->dev, NULL,
+ core, &si476x_regmap_config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_si476x);
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 4/9] mfd: Add header files and Kbuild plumbing for SI476x MFD core
2013-02-27 6:06 [PATCH v7 0/9] Driver for Si476x series of chips Andrey Smirnov
` (2 preceding siblings ...)
2013-02-27 6:06 ` [PATCH v7 3/9] mfd: Add chip properties handling code for SI476X MFD Andrey Smirnov
@ 2013-02-27 6:06 ` Andrey Smirnov
2013-02-27 6:20 ` Sam Ravnborg
2013-02-27 6:06 ` [PATCH v7 5/9] v4l2: Fix the type of V4L2_CID_TUNE_PREEMPHASIS in the documentation Andrey Smirnov
` (4 subsequent siblings)
8 siblings, 1 reply; 13+ messages in thread
From: Andrey Smirnov @ 2013-02-27 6:06 UTC (permalink / raw)
To: mchehab; +Cc: andrew.smirnov, hverkuil, sameo, sam, linux-media, linux-kernel
This patch adds all necessary header files and Kbuild plumbing for the
core driver for Silicon Laboratories Si476x series of AM/FM tuner
chips.
The driver as a whole is implemented as an MFD device and this patch
adds a core portion of it that provides all the necessary
functionality to the two other drivers that represent radio and audio
codec subsystems of the chip.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 4 +
include/linux/mfd/si476x-core.h | 525 +++++++++++++++++++++++++++++++++++++++
3 files changed, 541 insertions(+)
create mode 100644 include/linux/mfd/si476x-core.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1c0abd4..3cd8f21 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -970,6 +970,18 @@ config MFD_WL1273_CORE
driver connects the radio-wl1273 V4L2 module and the wl1273
audio codec.
+config MFD_SI476X_CORE
+ tristate "Support for Silicon Laboratories 4761/64/68 AM/FM radio."
+ depends on I2C
+ select MFD_CORE
+ help
+ This is the core driver for the SI476x series of AM/FM
+ radio. This MFD driver connects the radio-si476x V4L2 module
+ and the si476x audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called si476x-core.
+
config MFD_OMAP_USB_HOST
bool "Support OMAP USBHS core and TLL driver"
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 8b977f8..ca87ae8 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -131,6 +131,10 @@ obj-$(CONFIG_MFD_JZ4740_ADC) += jz4740-adc.o
obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
obj-$(CONFIG_MFD_VX855) += vx855.o
obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
+
+si476x-core-y := si476x-cmd.o si476x-prop.o si476x-i2c.o
+obj-$(CONFIG_MFD_SI476X_CORE) += si476x-core.o
+
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o omap-usb-tll.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
diff --git a/include/linux/mfd/si476x-core.h b/include/linux/mfd/si476x-core.h
new file mode 100644
index 0000000..2136b26
--- /dev/null
+++ b/include/linux/mfd/si476x-core.h
@@ -0,0 +1,525 @@
+/*
+ * include/media/si476x-core.h -- Common definitions for si476x core
+ * device
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ *
+ * Author: Andrey Smirnov <andrey.smirnov@convergeddevices.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef SI476X_CORE_H
+#define SI476X_CORE_H
+
+#include <linux/kfifo.h>
+#include <linux/atomic.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/mutex.h>
+#include <linux/mfd/core.h>
+#include <linux/videodev2.h>
+#include <linux/regulator/consumer.h>
+
+#include <media/si476x.h>
+
+/* Command Timeouts */
+#define SI476X_DEFAULT_TIMEOUT 100000
+#define SI476X_TIMEOUT_TUNE 700000
+#define SI476X_TIMEOUT_POWER_UP 330000
+#define SI476X_STATUS_POLL_US 0
+
+/* -------------------- si476x-i2c.c ----------------------- */
+
+enum si476x_freq_supported_chips {
+ SI476X_CHIP_SI4761 = 1,
+ SI476X_CHIP_SI4764,
+ SI476X_CHIP_SI4768,
+};
+
+enum si476x_mfd_cells {
+ SI476X_RADIO_CELL = 0,
+ SI476X_CODEC_CELL,
+ SI476X_MFD_CELLS,
+};
+
+/**
+ * enum si476x_power_state - possible power state of the si476x
+ * device.
+ *
+ * @SI476X_POWER_DOWN: In this state all regulators are turned off
+ * and the reset line is pulled low. The device is completely
+ * inactive.
+ * @SI476X_POWER_UP_FULL: In this state all the power regualtors are
+ * turned on, reset line pulled high, IRQ line is enabled(polling is
+ * active for polling use scenario) and device is turned on with
+ * POWER_UP command. The device is ready to be used.
+ * @SI476X_POWER_INCONSISTENT: This state indicates that previous
+ * power down was inconsistent, meaning some of the regulators were
+ * not turned down and thus use of the device, without power-cycling
+ * is impossible.
+ */
+enum si476x_power_state {
+ SI476X_POWER_DOWN = 0,
+ SI476X_POWER_UP_FULL = 1,
+ SI476X_POWER_INCONSISTENT = 2,
+};
+
+/**
+ * struct si476x_core - internal data structure representing the
+ * underlying "core" device which all the MFD cell-devices use.
+ *
+ * @client: Actual I2C client used to transfer commands to the chip.
+ * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
+ * @cells: MFD cell devices created by this driver.
+ * @cmd_lock: Mutex used to serialize all the requests to the core
+ * device. This filed should not be used directly. Instead
+ * si476x_core_lock()/si476x_core_unlock() should be used to get
+ * exclusive access to the "core" device.
+ * @users: Active users counter(Used by the radio cell)
+ * @rds_read_queue: Wait queue used to wait for RDS data.
+ * @rds_fifo: FIFO in which all the RDS data received from the chip is
+ * placed.
+ * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
+ * @rds_drainer_is_working: Flag used for launching only one instance
+ * of the @rds_fifo_drainer.
+ * @rds_drainer_status_lock: Lock used to guard access to the
+ * @rds_drainer_is_working variable.
+ * @command: Wait queue for wainting on the command comapletion.
+ * @cts: Clear To Send flag set upon receiving first status with CTS
+ * set.
+ * @tuning: Wait queue used for wainting for tune/seek comand
+ * completion.
+ * @stc: Similar to @cts, but for the STC bit of the status value.
+ * @power_up_parameters: Parameters used as argument for POWER_UP
+ * command when the device is started.
+ * @state: Current power state of the device.
+ * @supplues: Structure containing handles to all power supplies used
+ * by the device (NULL ones are ignored).
+ * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
+ * @pinmux: Chip's configurable pins configuration.
+ * @diversity_mode: Chips role when functioning in diversity mode.
+ * @status_monitor: Polling worker used in polling use case scenarion
+ * (when IRQ is not avalible).
+ * @revision: Chip's running firmware revision number(Used for correct
+ * command set support).
+ */
+
+struct si476x_core {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ int chip_id;
+ struct mfd_cell cells[SI476X_MFD_CELLS];
+
+ struct mutex cmd_lock; /* for serializing fm radio operations */
+ atomic_t users;
+
+ wait_queue_head_t rds_read_queue;
+ struct kfifo rds_fifo;
+ struct work_struct rds_fifo_drainer;
+ bool rds_drainer_is_working;
+ struct mutex rds_drainer_status_lock;
+
+ wait_queue_head_t command;
+ atomic_t cts;
+
+ wait_queue_head_t tuning;
+ atomic_t stc;
+
+ struct si476x_power_up_args power_up_parameters;
+
+ enum si476x_power_state power_state;
+
+ struct regulator_bulk_data supplies[4];
+
+ int gpio_reset;
+
+ struct si476x_pinmux pinmux;
+ enum si476x_phase_diversity_mode diversity_mode;
+
+ atomic_t is_alive;
+
+ struct delayed_work status_monitor;
+#define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w), \
+ struct si476x_core, \
+ status_monitor)
+
+ int revision;
+
+ int rds_fifo_depth;
+};
+
+static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ return i2c_get_clientdata(client);
+}
+
+
+/**
+ * si476x_core_lock() - lock the core device to get an exclusive access
+ * to it.
+ */
+static inline void si476x_core_lock(struct si476x_core *core)
+{
+ mutex_lock(&core->cmd_lock);
+}
+
+/**
+ * si476x_core_unlock() - unlock the core device to relinquish an
+ * exclusive access to it.
+ */
+static inline void si476x_core_unlock(struct si476x_core *core)
+{
+ mutex_unlock(&core->cmd_lock);
+}
+
+/* *_TUNE_FREQ family of commands accept frequency in multiples of
+ 10kHz */
+static inline u16 hz_to_si476x(struct si476x_core *core, int freq)
+{
+ u16 result;
+
+ switch (core->power_up_parameters.func) {
+ default:
+ case SI476X_FUNC_FM_RECEIVER:
+ result = freq / 10000;
+ break;
+ case SI476X_FUNC_AM_RECEIVER:
+ result = freq / 1000;
+ break;
+ }
+
+ return result;
+}
+
+static inline int si476x_to_hz(struct si476x_core *core, u16 freq)
+{
+ int result;
+
+ switch (core->power_up_parameters.func) {
+ default:
+ case SI476X_FUNC_FM_RECEIVER:
+ result = freq * 10000;
+ break;
+ case SI476X_FUNC_AM_RECEIVER:
+ result = freq * 1000;
+ break;
+ }
+
+ return result;
+}
+
+/* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
+ * mesures frequency in 62.5 Hz units */
+
+static inline int hz_to_v4l2(int freq)
+{
+ return (freq * 10) / 625;
+}
+
+static inline int v4l2_to_hz(int freq)
+{
+ return (freq * 625) / 10;
+}
+
+static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq)
+{
+ return hz_to_si476x(core, v4l2_to_hz(freq));
+}
+
+static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq)
+{
+ return hz_to_v4l2(si476x_to_hz(core, freq));
+}
+
+
+
+/**
+ * struct si476x_func_info - structure containing result of the
+ * FUNC_INFO command.
+ *
+ * @firmware.major: Firmware major number.
+ * @firmware.minor[...]: Firmware minor numbers.
+ * @patch_id:
+ * @func: Mode tuner is working in.
+ */
+struct si476x_func_info {
+ struct {
+ u8 major, minor[2];
+ } firmware;
+ u16 patch_id;
+ enum si476x_func func;
+};
+
+/**
+ * struct si476x_power_down_args - structure used to pass parameters
+ * to POWER_DOWN command
+ *
+ * @xosc: true - Power down, but leav oscillator running.
+ * false - Full power down.
+ */
+struct si476x_power_down_args {
+ bool xosc;
+};
+
+/**
+ * enum si476x_tunemode - enum representing possible tune modes for
+ * the chip.
+ * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
+ * channel after tune, tune status is valid.
+ * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
+ * channel after tune, tune status invalid.
+ * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
+ * metric thresholds are not met.
+ * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
+ * previous channel.
+ */
+enum si476x_tunemode {
+ SI476X_TM_VALIDATED_NORMAL_TUNE = 0,
+ SI476X_TM_INVALIDATED_FAST_TUNE = 1,
+ SI476X_TM_VALIDATED_AF_TUNE = 2,
+ SI476X_TM_VALIDATED_AF_CHECK = 3,
+};
+
+/**
+ * enum si476x_smoothmetrics - enum containing the possible setting fo
+ * audio transitioning of the chip
+ * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
+ * new channel
+ * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
+ * channel values to the new values
+ */
+enum si476x_smoothmetrics {
+ SI476X_SM_INITIALIZE_AUDIO = 0,
+ SI476X_SM_TRANSITION_AUDIO = 1,
+};
+
+/**
+ * struct si476x_rds_status_report - the structure representing the
+ * response to 'FM_RD_STATUS' command
+ * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
+ * code has changed.
+ * @rdspiint: Program indentifiaction(PI) code has changed.
+ * @rdssyncint: RDS synchronization has changed.
+ * @rdsfifoint: RDS was received and the RDS FIFO has at least
+ * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
+ * @tpptyvalid: TP flag and PTY code are valid falg.
+ * @pivalid: PI code is valid flag.
+ * @rdssync: RDS is currently synchronized.
+ * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
+ * @tp: Current channel's TP flag.
+ * @pty: Current channel's PTY code.
+ * @pi: Current channel's PI code.
+ * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
+ * empty).
+ */
+struct si476x_rds_status_report {
+ bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint;
+ bool tpptyvalid, pivalid, rdssync, rdsfifolost;
+ bool tp;
+
+ u8 pty;
+ u16 pi;
+
+ u8 rdsfifoused;
+ u8 ble[4];
+
+ struct v4l2_rds_data rds[4];
+};
+
+struct si476x_rsq_status_args {
+ bool primary;
+ bool rsqack;
+ bool attune;
+ bool cancel;
+ bool stcack;
+};
+
+enum si476x_injside {
+ SI476X_INJSIDE_AUTO = 0,
+ SI476X_INJSIDE_LOW = 1,
+ SI476X_INJSIDE_HIGH = 2,
+};
+
+struct si476x_tune_freq_args {
+ bool zifsr;
+ bool hd;
+ enum si476x_injside injside;
+ int freq;
+ enum si476x_tunemode tunemode;
+ enum si476x_smoothmetrics smoothmetrics;
+ int antcap;
+};
+
+int si476x_core_stop(struct si476x_core *, bool);
+int si476x_core_start(struct si476x_core *, bool);
+int si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state);
+bool si476x_core_has_am(struct si476x_core *);
+bool si476x_core_has_diversity(struct si476x_core *);
+bool si476x_core_is_a_secondary_tuner(struct si476x_core *);
+bool si476x_core_is_a_primary_tuner(struct si476x_core *);
+bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core);
+bool si476x_core_is_powered_up(struct si476x_core *core);
+
+enum si476x_i2c_type {
+ SI476X_I2C_SEND,
+ SI476X_I2C_RECV
+};
+
+int si476x_core_i2c_xfer(struct si476x_core *,
+ enum si476x_i2c_type,
+ char *, int);
+
+
+/* -------------------- si476x-cmd.c ----------------------- */
+
+int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *);
+int si476x_core_cmd_set_property(struct si476x_core *, u16, u16);
+int si476x_core_cmd_get_property(struct si476x_core *, u16);
+int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *,
+ enum si476x_dclk_config,
+ enum si476x_dfs_config,
+ enum si476x_dout_config,
+ enum si476x_xout_config);
+int si476x_core_cmd_zif_pin_cfg(struct si476x_core *,
+ enum si476x_iqclk_config,
+ enum si476x_iqfs_config,
+ enum si476x_iout_config,
+ enum si476x_qout_config);
+int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *,
+ enum si476x_icin_config,
+ enum si476x_icip_config,
+ enum si476x_icon_config,
+ enum si476x_icop_config);
+int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *,
+ enum si476x_lrout_config);
+int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config,
+ enum si476x_a1_config);
+int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool);
+int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool);
+int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool,
+ struct si476x_rds_status_report *);
+int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool,
+ struct si476x_rds_blockcount_report *);
+int si476x_core_cmd_fm_tune_freq(struct si476x_core *,
+ struct si476x_tune_freq_args *);
+int si476x_core_cmd_am_tune_freq(struct si476x_core *,
+ struct si476x_tune_freq_args *);
+int si476x_core_cmd_am_rsq_status(struct si476x_core *,
+ struct si476x_rsq_status_args *,
+ struct si476x_rsq_status_report *);
+int si476x_core_cmd_fm_rsq_status(struct si476x_core *,
+ struct si476x_rsq_status_args *,
+ struct si476x_rsq_status_report *);
+int si476x_core_cmd_power_up(struct si476x_core *,
+ struct si476x_power_up_args *);
+int si476x_core_cmd_power_down(struct si476x_core *,
+ struct si476x_power_down_args *);
+int si476x_core_cmd_fm_phase_div_status(struct si476x_core *);
+int si476x_core_cmd_fm_phase_diversity(struct si476x_core *,
+ enum si476x_phase_diversity_mode);
+
+int si476x_core_cmd_fm_acf_status(struct si476x_core *,
+ struct si476x_acf_status_report *);
+int si476x_core_cmd_am_acf_status(struct si476x_core *,
+ struct si476x_acf_status_report *);
+int si476x_core_cmd_agc_status(struct si476x_core *,
+ struct si476x_agc_status_report *);
+
+enum si476x_power_grid_type {
+ SI476X_POWER_GRID_50HZ = 0,
+ SI476X_POWER_GRID_60HZ,
+};
+
+/* Properties */
+
+enum si476x_interrupt_flags {
+ SI476X_STCIEN = (1 << 0),
+ SI476X_ACFIEN = (1 << 1),
+ SI476X_RDSIEN = (1 << 2),
+ SI476X_RSQIEN = (1 << 3),
+
+ SI476X_ERRIEN = (1 << 6),
+ SI476X_CTSIEN = (1 << 7),
+
+ SI476X_STCREP = (1 << 8),
+ SI476X_ACFREP = (1 << 9),
+ SI476X_RDSREP = (1 << 10),
+ SI476X_RSQREP = (1 << 11),
+};
+
+enum si476x_rdsint_sources {
+ SI476X_RDSTPPTY = (1 << 4),
+ SI476X_RDSPI = (1 << 3),
+ SI476X_RDSSYNC = (1 << 1),
+ SI476X_RDSRECV = (1 << 0),
+};
+
+enum si476x_status_response_bits {
+ SI476X_CTS = (1 << 7),
+ SI476X_ERR = (1 << 6),
+ /* Status response for WB receiver */
+ SI476X_WB_ASQ_INT = (1 << 4),
+ SI476X_RSQ_INT = (1 << 3),
+ /* Status response for FM receiver */
+ SI476X_FM_RDS_INT = (1 << 2),
+ SI476X_ACF_INT = (1 << 1),
+ SI476X_STC_INT = (1 << 0),
+};
+
+/* -------------------- si476x-prop.c ----------------------- */
+
+enum si476x_common_receiver_properties {
+ SI476X_PROP_INT_CTL_ENABLE = 0x0000,
+ SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE = 0x0200,
+ SI476X_PROP_DIGITAL_IO_INPUT_FORMAT = 0x0201,
+ SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE = 0x0202,
+ SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT = 0x0203,
+
+ SI476X_PROP_SEEK_BAND_BOTTOM = 0x1100,
+ SI476X_PROP_SEEK_BAND_TOP = 0x1101,
+ SI476X_PROP_SEEK_FREQUENCY_SPACING = 0x1102,
+
+ SI476X_PROP_VALID_MAX_TUNE_ERROR = 0x2000,
+ SI476X_PROP_VALID_SNR_THRESHOLD = 0x2003,
+ SI476X_PROP_VALID_RSSI_THRESHOLD = 0x2004,
+};
+
+enum si476x_am_receiver_properties {
+ SI476X_PROP_AUDIO_PWR_LINE_FILTER = 0x0303,
+};
+
+enum si476x_fm_receiver_properties {
+ SI476X_PROP_AUDIO_DEEMPHASIS = 0x0302,
+
+ SI476X_PROP_FM_RDS_INTERRUPT_SOURCE = 0x4000,
+ SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT = 0x4001,
+ SI476X_PROP_FM_RDS_CONFIG = 0x4002,
+};
+
+enum si476x_prop_audio_pwr_line_filter_bits {
+ SI476X_PROP_PWR_HARMONICS_MASK = 0b0000000000011111,
+ SI476X_PROP_PWR_GRID_MASK = 0b0000000100000000,
+ SI476X_PROP_PWR_ENABLE_MASK = 0b0000001000000000,
+ SI476X_PROP_PWR_GRID_50HZ = 0b0000000000000000,
+ SI476X_PROP_PWR_GRID_60HZ = 0b0000000100000000,
+};
+
+enum si476x_prop_fm_rds_config_bits {
+ SI476X_PROP_RDSEN_MASK = 0x1,
+ SI476X_PROP_RDSEN = 0x1,
+};
+
+
+struct regmap *devm_regmap_init_si476x(struct si476x_core *);
+
+#endif /* SI476X_CORE_H */
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [PATCH v7 4/9] mfd: Add header files and Kbuild plumbing for SI476x MFD core
2013-02-27 6:06 ` [PATCH v7 4/9] mfd: Add header files and Kbuild plumbing for SI476x MFD core Andrey Smirnov
@ 2013-02-27 6:20 ` Sam Ravnborg
0 siblings, 0 replies; 13+ messages in thread
From: Sam Ravnborg @ 2013-02-27 6:20 UTC (permalink / raw)
To: Andrey Smirnov; +Cc: mchehab, hverkuil, sameo, linux-media, linux-kernel
On Tue, Feb 26, 2013 at 10:06:48PM -0800, Andrey Smirnov wrote:
> This patch adds all necessary header files and Kbuild plumbing for the
> core driver for Silicon Laboratories Si476x series of AM/FM tuner
> chips.
>
> The driver as a whole is implemented as an MFD device and this patch
> adds a core portion of it that provides all the necessary
> functionality to the two other drivers that represent radio and audio
> codec subsystems of the chip.
>
> Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v7 5/9] v4l2: Fix the type of V4L2_CID_TUNE_PREEMPHASIS in the documentation
2013-02-27 6:06 [PATCH v7 0/9] Driver for Si476x series of chips Andrey Smirnov
` (3 preceding siblings ...)
2013-02-27 6:06 ` [PATCH v7 4/9] mfd: Add header files and Kbuild plumbing for SI476x MFD core Andrey Smirnov
@ 2013-02-27 6:06 ` Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 6/9] v4l2: Add standard controls for FM receivers Andrey Smirnov
` (3 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Andrey Smirnov @ 2013-02-27 6:06 UTC (permalink / raw)
To: mchehab; +Cc: andrew.smirnov, hverkuil, sameo, sam, linux-media, linux-kernel
Change the type of V4L2_CID_TUNE_PREEMPHASIS from 'integer' to 'enum
v4l2_preemphasis'
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Singed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
Documentation/DocBook/media/v4l/controls.xml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 9e8f854..1ad20cc 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -3848,7 +3848,7 @@ in Hz. The range and step are driver-specific.</entry>
</row>
<row>
<entry spanname="id"><constant>V4L2_CID_TUNE_PREEMPHASIS</constant> </entry>
- <entry>integer</entry>
+ <entry>enum v4l2_preemphasis</entry>
</row>
<row id="v4l2-preemphasis"><entry spanname="descr">Configures the pre-emphasis value for broadcasting.
A pre-emphasis filter is applied to the broadcast to accentuate the high audio frequencies.
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 6/9] v4l2: Add standard controls for FM receivers
2013-02-27 6:06 [PATCH v7 0/9] Driver for Si476x series of chips Andrey Smirnov
` (4 preceding siblings ...)
2013-02-27 6:06 ` [PATCH v7 5/9] v4l2: Fix the type of V4L2_CID_TUNE_PREEMPHASIS in the documentation Andrey Smirnov
@ 2013-02-27 6:06 ` Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 7/9] v4l2: Add documentation for the FM RX controls Andrey Smirnov
` (2 subsequent siblings)
8 siblings, 0 replies; 13+ messages in thread
From: Andrey Smirnov @ 2013-02-27 6:06 UTC (permalink / raw)
To: mchehab; +Cc: andrew.smirnov, hverkuil, sameo, sam, linux-media, linux-kernel
This commit introduces new class of standard controls
V4L2_CTRL_CLASS_FM_RX. This class is intended to all controls
pertaining to FM receiver chips. Also, two controls belonging to said
class are added as a part of this commit: V4L2_CID_TUNE_DEEMPHASIS and
V4L2_CID_RDS_RECEPTION.
This patch is based on the code found in the patch by Manjunatha Halli [1]
[1] http://lists-archives.com/linux-kernel/27641307-new-control-class-and-features-for-fm-rx.html
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
drivers/media/v4l2-core/v4l2-ctrls.c | 14 +++++++++++---
include/uapi/linux/v4l2-controls.h | 13 +++++++++++++
2 files changed, 24 insertions(+), 3 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-ctrls.c b/drivers/media/v4l2-core/v4l2-ctrls.c
index 6b28b58..8b89fb8 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls.c
@@ -297,8 +297,8 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
"Text",
NULL
};
- static const char * const tune_preemphasis[] = {
- "No Preemphasis",
+ static const char * const tune_emphasis[] = {
+ "None",
"50 Microseconds",
"75 Microseconds",
NULL,
@@ -508,7 +508,9 @@ const char * const *v4l2_ctrl_get_menu(u32 id)
case V4L2_CID_SCENE_MODE:
return scene_mode;
case V4L2_CID_TUNE_PREEMPHASIS:
- return tune_preemphasis;
+ return tune_emphasis;
+ case V4L2_CID_TUNE_DEEMPHASIS:
+ return tune_emphasis;
case V4L2_CID_FLASH_LED_MODE:
return flash_led_mode;
case V4L2_CID_FLASH_STROBE_SOURCE:
@@ -799,6 +801,9 @@ const char *v4l2_ctrl_get_name(u32 id)
case V4L2_CID_DV_RX_POWER_PRESENT: return "Power Present";
case V4L2_CID_DV_RX_RGB_RANGE: return "Rx RGB Quantization Range";
+ case V4L2_CID_FM_RX_CLASS: return "FM Radio Receiver Controls";
+ case V4L2_CID_TUNE_DEEMPHASIS: return "De-Emphasis";
+ case V4L2_CID_RDS_RECEPTION: return "RDS Reception";
default:
return NULL;
}
@@ -846,6 +851,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
case V4L2_CID_MPEG_VIDEO_MPEG4_QPEL:
case V4L2_CID_WIDE_DYNAMIC_RANGE:
case V4L2_CID_IMAGE_STABILIZATION:
+ case V4L2_CID_RDS_RECEPTION:
*type = V4L2_CTRL_TYPE_BOOLEAN;
*min = 0;
*max = *step = 1;
@@ -904,6 +910,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
case V4L2_CID_DV_TX_RGB_RANGE:
case V4L2_CID_DV_RX_RGB_RANGE:
case V4L2_CID_TEST_PATTERN:
+ case V4L2_CID_TUNE_DEEMPHASIS:
*type = V4L2_CTRL_TYPE_MENU;
break;
case V4L2_CID_LINK_FREQ:
@@ -926,6 +933,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
case V4L2_CID_IMAGE_SOURCE_CLASS:
case V4L2_CID_IMAGE_PROC_CLASS:
case V4L2_CID_DV_CLASS:
+ case V4L2_CID_FM_RX_CLASS:
*type = V4L2_CTRL_TYPE_CTRL_CLASS;
/* You can neither read not write these */
*flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index dcd6374..3e985be 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -59,6 +59,7 @@
#define V4L2_CTRL_CLASS_IMAGE_SOURCE 0x009e0000 /* Image source controls */
#define V4L2_CTRL_CLASS_IMAGE_PROC 0x009f0000 /* Image processing controls */
#define V4L2_CTRL_CLASS_DV 0x00a00000 /* Digital Video controls */
+#define V4L2_CTRL_CLASS_FM_RX 0x00a10000 /* Digital Video controls */
/* User-class control IDs */
@@ -825,4 +826,16 @@ enum v4l2_dv_rgb_range {
#define V4L2_CID_DV_RX_POWER_PRESENT (V4L2_CID_DV_CLASS_BASE + 100)
#define V4L2_CID_DV_RX_RGB_RANGE (V4L2_CID_DV_CLASS_BASE + 101)
+#define V4L2_CID_FM_RX_CLASS_BASE (V4L2_CTRL_CLASS_FM_RX | 0x900)
+#define V4L2_CID_FM_RX_CLASS (V4L2_CTRL_CLASS_FM_RX | 1)
+
+#define V4L2_CID_TUNE_DEEMPHASIS (V4L2_CID_FM_RX_CLASS_BASE + 1)
+enum v4l2_deemphasis {
+ V4L2_DEEMPHASIS_DISABLED = V4L2_PREEMPHASIS_DISABLED,
+ V4L2_DEEMPHASIS_50_uS = V4L2_PREEMPHASIS_50_uS,
+ V4L2_DEEMPHASIS_75_uS = V4L2_PREEMPHASIS_75_uS,
+};
+
+#define V4L2_CID_RDS_RECEPTION (V4L2_CID_FM_RX_CLASS_BASE + 2)
+
#endif
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 7/9] v4l2: Add documentation for the FM RX controls
2013-02-27 6:06 [PATCH v7 0/9] Driver for Si476x series of chips Andrey Smirnov
` (5 preceding siblings ...)
2013-02-27 6:06 ` [PATCH v7 6/9] v4l2: Add standard controls for FM receivers Andrey Smirnov
@ 2013-02-27 6:06 ` Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 8/9] v4l2: Add private controls base for SI476X Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 9/9] v4l2: Add a V4L2 driver for SI476X MFD Andrey Smirnov
8 siblings, 0 replies; 13+ messages in thread
From: Andrey Smirnov @ 2013-02-27 6:06 UTC (permalink / raw)
To: mchehab; +Cc: andrew.smirnov, hverkuil, sameo, sam, linux-media, linux-kernel
Add appropriate documentation for all the newly added standard
controls.
Based on the patch by Manjunatha Halli [1]
[1] http://lists-archives.com/linux-kernel/27641303-media-update-docs-for-v4l2-fm-new-features.html
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
Documentation/DocBook/media/v4l/compat.xml | 3 +
Documentation/DocBook/media/v4l/controls.xml | 72 ++++++++++++++++++++
.../DocBook/media/v4l/vidioc-g-ext-ctrls.xml | 9 +++
3 files changed, 84 insertions(+)
diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml
index 104a1a2..f418bc3 100644
--- a/Documentation/DocBook/media/v4l/compat.xml
+++ b/Documentation/DocBook/media/v4l/compat.xml
@@ -2310,6 +2310,9 @@ more information.</para>
<listitem>
<para>Added FM Modulator (FM TX) Extended Control Class: <constant>V4L2_CTRL_CLASS_FM_TX</constant> and their Control IDs.</para>
</listitem>
+<listitem>
+ <para>Added FM Receiver (FM RX) Extended Control Class: <constant>V4L2_CTRL_CLASS_FM_RX</constant> and their Control IDs.</para>
+ </listitem>
<listitem>
<para>Added Remote Controller chapter, describing the default Remote Controller mapping for media devices.</para>
</listitem>
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 1ad20cc..6aa647a 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -4687,4 +4687,76 @@ interface and may change in the future.</para>
</table>
</section>
+
+ <section id="fm-rx-controls">
+ <title>FM Receiver Control Reference</title>
+
+ <para>The FM Receiver (FM_RX) class includes controls for common features of
+ FM Reception capable devices.</para>
+
+ <table pgwide="1" frame="none" id="fm-rx-control-id">
+ <title>FM_RX Control IDs</title>
+
+ <tgroup cols="4">
+ <colspec colname="c1" colwidth="1*" />
+ <colspec colname="c2" colwidth="6*" />
+ <colspec colname="c3" colwidth="2*" />
+ <colspec colname="c4" colwidth="6*" />
+ <spanspec namest="c1" nameend="c2" spanname="id" />
+ <spanspec namest="c2" nameend="c4" spanname="descr" />
+ <thead>
+ <row>
+ <entry spanname="id" align="left">ID</entry>
+ <entry align="left">Type</entry>
+ </row><row rowsep="1"><entry spanname="descr" align="left">Description</entry>
+ </row>
+ </thead>
+ <tbody valign="top">
+ <row><entry></entry></row>
+ <row>
+ <entry spanname="id"><constant>V4L2_CID_FM_RX_CLASS</constant> </entry>
+ <entry>class</entry>
+ </row><row><entry spanname="descr">The FM_RX class
+descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a
+description of this control class.</entry>
+ </row>
+ <row>
+ <entry spanname="id"><constant>V4L2_CID_RDS_RECEPTION</constant> </entry>
+ <entry>boolean</entry>
+ </row><row><entry spanname="descr">Enables/disables RDS
+ reception by the radio tuner</entry>
+ </row>
+ <row>
+ <entry spanname="id"><constant>V4L2_CID_TUNE_DEEMPHASIS</constant> </entry>
+ <entry>enum v4l2_deemphasis</entry>
+ </row>
+ <row id="v4l2-deemphasis"><entry spanname="descr">Configures the de-emphasis value for reception.
+A de-emphasis filter is applied to the broadcast to accentuate the high audio frequencies.
+Depending on the region, a time constant of either 50 or 75 useconds is used. The enum v4l2_deemphasis
+defines possible values for de-emphasis. Here they are:</entry>
+ </row><row>
+ <entrytbl spanname="descr" cols="2">
+ <tbody valign="top">
+ <row>
+ <entry><constant>V4L2_DEEMPHASIS_DISABLED</constant> </entry>
+ <entry>No de-emphasis is applied.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_DEEMPHASIS_50_uS</constant> </entry>
+ <entry>A de-emphasis of 50 uS is used.</entry>
+ </row>
+ <row>
+ <entry><constant>V4L2_DEEMPHASIS_75_uS</constant> </entry>
+ <entry>A de-emphasis of 75 uS is used.</entry>
+ </row>
+ </tbody>
+ </entrytbl>
+
+ </row>
+ <row><entry></entry></row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ </section>
</section>
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index 4e16112..b3bb957 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -319,6 +319,15 @@ These controls are described in <xref
processing controls. These controls are described in <xref
linkend="image-process-controls" />.</entry>
</row>
+
+ <row>
+ <entry><constant>V4L2_CTRL_CLASS_FM_RX</constant></entry>
+ <entry>0xa10000</entry>
+ <entry>The class containing FM Receiver (FM RX) controls.
+These controls are described in <xref
+ linkend="fm-rx-controls" />.</entry>
+ </row>
+
</tbody>
</tgroup>
</table>
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 8/9] v4l2: Add private controls base for SI476X
2013-02-27 6:06 [PATCH v7 0/9] Driver for Si476x series of chips Andrey Smirnov
` (6 preceding siblings ...)
2013-02-27 6:06 ` [PATCH v7 7/9] v4l2: Add documentation for the FM RX controls Andrey Smirnov
@ 2013-02-27 6:06 ` Andrey Smirnov
2013-02-27 6:06 ` [PATCH v7 9/9] v4l2: Add a V4L2 driver for SI476X MFD Andrey Smirnov
8 siblings, 0 replies; 13+ messages in thread
From: Andrey Smirnov @ 2013-02-27 6:06 UTC (permalink / raw)
To: mchehab; +Cc: andrew.smirnov, hverkuil, sameo, sam, linux-media, linux-kernel
Add a base to be used for allocation of all the SI476X specific
controls in the corresponding driver.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
include/uapi/linux/v4l2-controls.h | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
index 3e985be..22e5170 100644
--- a/include/uapi/linux/v4l2-controls.h
+++ b/include/uapi/linux/v4l2-controls.h
@@ -147,6 +147,10 @@ enum v4l2_colorfx {
* of controls. We reserve 16 controls for this driver. */
#define V4L2_CID_USER_MEYE_BASE (V4L2_CID_USER_BASE + 0x1000)
+/* The base for the si476x driver controls. See include/media/si476x.h for the list
+ * of controls. Total of 16 controls is reserved for that driver */
+#define V4L2_CID_USER_SI476X_BASE (V4L2_CID_USER_BASE + 0x1010)
+
/* MPEG-class control IDs */
#define V4L2_CID_MPEG_BASE (V4L2_CTRL_CLASS_MPEG | 0x900)
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread* [PATCH v7 9/9] v4l2: Add a V4L2 driver for SI476X MFD
2013-02-27 6:06 [PATCH v7 0/9] Driver for Si476x series of chips Andrey Smirnov
` (7 preceding siblings ...)
2013-02-27 6:06 ` [PATCH v7 8/9] v4l2: Add private controls base for SI476X Andrey Smirnov
@ 2013-02-27 6:06 ` Andrey Smirnov
8 siblings, 0 replies; 13+ messages in thread
From: Andrey Smirnov @ 2013-02-27 6:06 UTC (permalink / raw)
To: mchehab; +Cc: andrew.smirnov, hverkuil, sameo, sam, linux-media, linux-kernel
This commit adds a driver that exposes all the radio related
functionality of the Si476x series of chips via the V4L2 subsystem.
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
Documentation/video4linux/si476x.txt | 187 ++++
drivers/media/radio/Kconfig | 17 +
drivers/media/radio/Makefile | 1 +
drivers/media/radio/radio-si476x.c | 1574 ++++++++++++++++++++++++++++++++++
include/media/si476x.h | 426 +++++++++
5 files changed, 2205 insertions(+)
create mode 100644 Documentation/video4linux/si476x.txt
create mode 100644 drivers/media/radio/radio-si476x.c
create mode 100644 include/media/si476x.h
diff --git a/Documentation/video4linux/si476x.txt b/Documentation/video4linux/si476x.txt
new file mode 100644
index 0000000..d1a08db
--- /dev/null
+++ b/Documentation/video4linux/si476x.txt
@@ -0,0 +1,187 @@
+SI476x Driver Readme
+------------------------------------------------
+ Copyright (C) 2013 Andrey Smirnov <andrew.smirnov@gmail.com>
+
+TODO for the driver
+------------------------------
+
+- According to the SiLabs' datasheet it is possible to update the
+ firmware of the radio chip in the run-time, thus bringing it to the
+ most recent version. Unfortunately I couldn't find any mentioning of
+ the said firmware update for the old chips that I tested the driver
+ against, so for chips like that the driver only exposes the old
+ functionality.
+
+
+Parameters exposed over debugfs
+-------------------------------
+SI476x allow user to get multiple characteristics that can be very
+useful for EoL testing/RF performance estimation, parameters that have
+very little to do with V4L2 subsystem. Such parameters are exposed via
+debugfs and can be accessed via regular file I/O operations.
+
+The drivers exposes following files:
+
+* /sys/kernel/debug/<device-name>/acf
+ This file contains ACF(Automatically Controlled Features) status
+ information. The contents of the file is binary data of the
+ following layout:
+
+ Offset | Name | Description
+ ====================================================================
+ 0x00 | blend_int | Flag, set when stereo separation has
+ | | crossed below the blend threshold
+ --------------------------------------------------------------------
+ 0x01 | hblend_int | Flag, set when HiBlend cutoff
+ | | frequency is lower than threshold
+ --------------------------------------------------------------------
+ 0x02 | hicut_int | Flag, set when HiCut cutoff
+ | | frequency is lower than threshold
+ --------------------------------------------------------------------
+ 0x03 | chbw_int | Flag, set when channel filter
+ | | bandwidth is less than threshold
+ --------------------------------------------------------------------
+ 0x04 | softmute_int | Flag indicating that softmute
+ | | attenuation has increased above
+ | | softmute threshold
+ --------------------------------------------------------------------
+ 0x05 | smute | 0 - Audio is not soft muted
+ | | 1 - Audio is soft muted
+ --------------------------------------------------------------------
+ 0x06 | smattn | Soft mute attenuation level in dB
+ --------------------------------------------------------------------
+ 0x07 | chbw | Channel filter bandwidth in kHz
+ --------------------------------------------------------------------
+ 0x08 | hicut | HiCut cutoff frequency in units of
+ | | 100Hz
+ --------------------------------------------------------------------
+ 0x09 | hiblend | HiBlend cutoff frequency in units
+ | | of 100 Hz
+ --------------------------------------------------------------------
+ 0x10 | pilot | 0 - Stereo pilot is not present
+ | | 1 - Stereo pilot is present
+ --------------------------------------------------------------------
+ 0x11 | stblend | Stereo blend in %
+ --------------------------------------------------------------------
+
+
+* /sys/kernel/debug/<device-name>/rds_blckcnt
+ This file contains statistics about RDS receptions. It's binary data
+ has the following layout:
+
+ Offset | Name | Description
+ ====================================================================
+ 0x00 | expected | Number of expected RDS blocks
+ --------------------------------------------------------------------
+ 0x02 | received | Number of received RDS blocks
+ --------------------------------------------------------------------
+ 0x04 | uncorrectable | Number of uncorrectable RDS blocks
+ --------------------------------------------------------------------
+
+* /sys/kernel/debug/<device-name>/agc
+ This file contains information about parameters pertaining to
+ AGC(Automatic Gain Control)
+
+ The layout is:
+ Offset | Name | Description
+ ====================================================================
+ 0x00 | mxhi | 0 - FM Mixer PD high threshold is
+ | | not tripped
+ | | 1 - FM Mixer PD high threshold is
+ | | tripped
+ --------------------------------------------------------------------
+ 0x01 | mxlo | ditto for FM Mixer PD low
+ --------------------------------------------------------------------
+ 0x02 | lnahi | ditto for FM LNA PD high
+ --------------------------------------------------------------------
+ 0x03 | lnalo | ditto for FM LNA PD low
+ --------------------------------------------------------------------
+ 0x04 | fmagc1 | FMAGC1 attenuator resistance
+ | | (see datasheet for more detail)
+ --------------------------------------------------------------------
+ 0x05 | fmagc2 | ditto for FMAGC2
+ --------------------------------------------------------------------
+ 0x06 | pgagain | PGA gain in dB
+ --------------------------------------------------------------------
+ 0x07 | fmwblang | FM/WB LNA Gain in dB
+ --------------------------------------------------------------------
+
+* /sys/kernel/debug/<device-name>/rsq
+ This file contains information about parameters pertaining to
+ RSQ(Received Signal Quality)
+
+ The layout is:
+ Offset | Name | Description
+ ====================================================================
+ 0x00 | multhint | 0 - multipath value has not crossed
+ | | the Multipath high threshold
+ | | 1 - multipath value has crossed
+ | | the Multipath high threshold
+ --------------------------------------------------------------------
+ 0x01 | multlint | ditto for Multipath low threshold
+ --------------------------------------------------------------------
+ 0x02 | snrhint | 0 - received signal's SNR has not
+ | | crossed high threshold
+ | | 1 - received signal's SNR has
+ | | crossed high threshold
+ --------------------------------------------------------------------
+ 0x03 | snrlint | ditto for low threshold
+ --------------------------------------------------------------------
+ 0x04 | rssihint | ditto for RSSI high threshold
+ --------------------------------------------------------------------
+ 0x05 | rssilint | ditto for RSSI low threshold
+ --------------------------------------------------------------------
+ 0x06 | bltf | Flag indicating if seek command
+ | | reached/wrapped seek band limit
+ --------------------------------------------------------------------
+ 0x07 | snr_ready | Indicates that SNR metrics is ready
+ --------------------------------------------------------------------
+ 0x08 | rssiready | ditto for RSSI metrics
+ --------------------------------------------------------------------
+ 0x09 | injside | 0 - Low-side injection is being used
+ | | 1 - High-side injection is used
+ --------------------------------------------------------------------
+ 0x10 | afcrl | Flag indicating if AFC rails
+ --------------------------------------------------------------------
+ 0x11 | valid | Flag indicating if channel is valid
+ --------------------------------------------------------------------
+ 0x12 | readfreq | Current tuned frequency
+ --------------------------------------------------------------------
+ 0x14 | freqoff | Singed frequency offset in units of
+ | | 2ppm
+ --------------------------------------------------------------------
+ 0x15 | rssi | Signed value of RSSI in dBuV
+ --------------------------------------------------------------------
+ 0x16 | snr | Signed RF SNR in dB
+ --------------------------------------------------------------------
+ 0x17 | issi | Signed Image Strength Signal
+ | | indicator
+ --------------------------------------------------------------------
+ 0x18 | lassi | Signed Low side adjacent Channel
+ | | Strength indicator
+ --------------------------------------------------------------------
+ 0x19 | hassi | ditto fpr High side
+ --------------------------------------------------------------------
+ 0x20 | mult | Multipath indicator
+ --------------------------------------------------------------------
+ 0x21 | dev | Frequency deviation
+ --------------------------------------------------------------------
+ 0x24 | assi | Adjascent channel SSI
+ --------------------------------------------------------------------
+ 0x25 | usn | Ultrasonic noise indicator
+ --------------------------------------------------------------------
+ 0x26 | pilotdev | Pilot deviation in units of 100 Hz
+ --------------------------------------------------------------------
+ 0x27 | rdsdev | ditto for RDS
+ --------------------------------------------------------------------
+ 0x28 | assidev | ditto for ASSI
+ --------------------------------------------------------------------
+ 0x29 | strongdev | Frequency deviation
+ --------------------------------------------------------------------
+ 0x30 | rdspi | RDS PI code
+ --------------------------------------------------------------------
+
+* /sys/kernel/debug/<device-name>/rsq_primary
+ This file contains information about parameters pertaining to
+ RSQ(Received Signal Quality) for primary tuner only. Layout is as
+ the one above.
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
index ead9928..170460d 100644
--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -18,6 +18,23 @@ config RADIO_SI470X
source "drivers/media/radio/si470x/Kconfig"
+config RADIO_SI476X
+ tristate "Silicon Laboratories Si476x I2C FM Radio"
+ depends on I2C && VIDEO_V4L2
+ select MFD_CORE
+ select MFD_SI476X_CORE
+ select SND_SOC_SI476X
+ ---help---
+ Choose Y here if you have this FM radio chip.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux 2 API. Information on
+ this API and pointers to "v4l2" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-si476x.
+
config USB_MR800
tristate "AverMedia MR 800 USB FM radio support"
depends on USB && VIDEO_V4L2
diff --git a/drivers/media/radio/Makefile b/drivers/media/radio/Makefile
index 303eaeb..0dcdb32 100644
--- a/drivers/media/radio/Makefile
+++ b/drivers/media/radio/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_RADIO_GEMTEK) += radio-gemtek.o
obj-$(CONFIG_RADIO_TRUST) += radio-trust.o
obj-$(CONFIG_I2C_SI4713) += si4713-i2c.o
obj-$(CONFIG_RADIO_SI4713) += radio-si4713.o
+obj-$(CONFIG_RADIO_SI476X) += radio-si476x.o
obj-$(CONFIG_RADIO_MIROPCM20) += radio-miropcm20.o
obj-$(CONFIG_USB_DSBR) += dsbr100.o
obj-$(CONFIG_RADIO_SI470X) += si470x/
diff --git a/drivers/media/radio/radio-si476x.c b/drivers/media/radio/radio-si476x.c
new file mode 100644
index 0000000..a1b901b
--- /dev/null
+++ b/drivers/media/radio/radio-si476x.c
@@ -0,0 +1,1574 @@
+/*
+ * drivers/media/radio/radio-si476x.c -- V4L2 driver for SI476X chips
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/atomic.h>
+#include <linux/videodev2.h>
+#include <linux/mutex.h>
+#include <linux/debugfs.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-device.h>
+
+#include <media/si476x.h>
+#include <linux/mfd/si476x-core.h>
+
+#define FM_FREQ_RANGE_LOW 64000000
+#define FM_FREQ_RANGE_HIGH 108000000
+
+#define AM_FREQ_RANGE_LOW 520000
+#define AM_FREQ_RANGE_HIGH 30000000
+
+#define PWRLINEFLTR (1 << 8)
+
+#define FREQ_MUL (10000000 / 625)
+
+#define SI476X_PHDIV_STATUS_LINK_LOCKED(status) (0b10000000 & (status))
+
+#define DRIVER_NAME "si476x-radio"
+#define DRIVER_CARD "SI476x AM/FM Receiver"
+
+enum si476x_freq_bands {
+ SI476X_BAND_FM,
+ SI476X_BAND_AM,
+};
+
+static const struct v4l2_frequency_band si476x_bands[] = {
+ [SI476X_BAND_FM] = {
+ .type = V4L2_TUNER_RADIO,
+ .index = SI476X_BAND_FM,
+ .capability = V4L2_TUNER_CAP_LOW
+ | V4L2_TUNER_CAP_STEREO
+ | V4L2_TUNER_CAP_RDS
+ | V4L2_TUNER_CAP_RDS_BLOCK_IO
+ | V4L2_TUNER_CAP_FREQ_BANDS,
+ .rangelow = 64 * FREQ_MUL,
+ .rangehigh = 108 * FREQ_MUL,
+ .modulation = V4L2_BAND_MODULATION_FM,
+ },
+ [SI476X_BAND_AM] = {
+ .type = V4L2_TUNER_RADIO,
+ .index = SI476X_BAND_AM,
+ .capability = V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_FREQ_BANDS,
+ .rangelow = 0.52 * FREQ_MUL,
+ .rangehigh = 30 * FREQ_MUL,
+ .modulation = V4L2_BAND_MODULATION_AM,
+ },
+};
+
+static inline bool si476x_radio_freq_is_inside_of_the_band(u32 freq, int band)
+{
+ return freq >= si476x_bands[band].rangelow &&
+ freq <= si476x_bands[band].rangehigh;
+}
+
+static inline bool si476x_radio_range_is_inside_of_the_band(u32 low, u32 high, int band)
+{
+ return low >= si476x_bands[band].rangelow &&
+ high <= si476x_bands[band].rangehigh;
+}
+
+static int si476x_radio_s_ctrl(struct v4l2_ctrl *ctrl);
+static int si476x_radio_g_volatile_ctrl(struct v4l2_ctrl *ctrl);
+
+enum phase_diversity_modes_idx {
+ SI476X_IDX_PHDIV_DISABLED,
+ SI476X_IDX_PHDIV_PRIMARY_COMBINING,
+ SI476X_IDX_PHDIV_PRIMARY_ANTENNA,
+ SI476X_IDX_PHDIV_SECONDARY_ANTENNA,
+ SI476X_IDX_PHDIV_SECONDARY_COMBINING,
+};
+
+static const char * const phase_diversity_modes[] = {
+ [SI476X_IDX_PHDIV_DISABLED] = "Disabled",
+ [SI476X_IDX_PHDIV_PRIMARY_COMBINING] = "Primary with Secondary",
+ [SI476X_IDX_PHDIV_PRIMARY_ANTENNA] = "Primary Antenna",
+ [SI476X_IDX_PHDIV_SECONDARY_ANTENNA] = "Secondary Antenna",
+ [SI476X_IDX_PHDIV_SECONDARY_COMBINING] = "Secondary with Primary",
+};
+
+static inline enum phase_diversity_modes_idx
+si476x_phase_diversity_mode_to_idx(enum si476x_phase_diversity_mode mode)
+{
+ switch (mode) {
+ default: /* FALLTHROUGH */
+ case SI476X_PHDIV_DISABLED:
+ return SI476X_IDX_PHDIV_DISABLED;
+ case SI476X_PHDIV_PRIMARY_COMBINING:
+ return SI476X_IDX_PHDIV_PRIMARY_COMBINING;
+ case SI476X_PHDIV_PRIMARY_ANTENNA:
+ return SI476X_IDX_PHDIV_PRIMARY_ANTENNA;
+ case SI476X_PHDIV_SECONDARY_ANTENNA:
+ return SI476X_IDX_PHDIV_SECONDARY_ANTENNA;
+ case SI476X_PHDIV_SECONDARY_COMBINING:
+ return SI476X_IDX_PHDIV_SECONDARY_COMBINING;
+ }
+}
+
+static inline enum si476x_phase_diversity_mode
+si476x_phase_diversity_idx_to_mode(enum phase_diversity_modes_idx idx)
+{
+ static const int idx_to_value[] = {
+ [SI476X_IDX_PHDIV_DISABLED] = SI476X_PHDIV_DISABLED,
+ [SI476X_IDX_PHDIV_PRIMARY_COMBINING] = SI476X_PHDIV_PRIMARY_COMBINING,
+ [SI476X_IDX_PHDIV_PRIMARY_ANTENNA] = SI476X_PHDIV_PRIMARY_ANTENNA,
+ [SI476X_IDX_PHDIV_SECONDARY_ANTENNA] = SI476X_PHDIV_SECONDARY_ANTENNA,
+ [SI476X_IDX_PHDIV_SECONDARY_COMBINING] = SI476X_PHDIV_SECONDARY_COMBINING,
+ };
+
+ return idx_to_value[idx];
+}
+
+static const struct v4l2_ctrl_ops si476x_ctrl_ops = {
+ .g_volatile_ctrl = si476x_radio_g_volatile_ctrl,
+ .s_ctrl = si476x_radio_s_ctrl,
+};
+
+
+enum si476x_ctrl_idx {
+ SI476X_IDX_RSSI_THRESHOLD,
+ SI476X_IDX_SNR_THRESHOLD,
+ SI476X_IDX_MAX_TUNE_ERROR,
+ SI476X_IDX_HARMONICS_COUNT,
+ SI476X_IDX_DIVERSITY_MODE,
+ SI476X_IDX_INTERCHIP_LINK,
+};
+static struct v4l2_ctrl_config si476x_ctrls[] = {
+
+ /**
+ * SI476X during its station seeking(or tuning) process uses several
+ * parameters to detrmine if "the station" is valid:
+ *
+ * - Signal's SNR(in dBuV) must be lower than
+ * #V4L2_CID_SI476X_SNR_THRESHOLD
+ * - Signal's RSSI(in dBuV) must be greater than
+ * #V4L2_CID_SI476X_RSSI_THRESHOLD
+ * - Signal's frequency deviation(in units of 2ppm) must not be
+ * more than #V4L2_CID_SI476X_MAX_TUNE_ERROR
+ */
+ [SI476X_IDX_RSSI_THRESHOLD] = {
+ .ops = &si476x_ctrl_ops,
+ .id = V4L2_CID_SI476X_RSSI_THRESHOLD,
+ .name = "Valid RSSI Threshold",
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .min = -128,
+ .max = 127,
+ .step = 1,
+ },
+ [SI476X_IDX_SNR_THRESHOLD] = {
+ .ops = &si476x_ctrl_ops,
+ .id = V4L2_CID_SI476X_SNR_THRESHOLD,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Valid SNR Threshold",
+ .min = -128,
+ .max = 127,
+ .step = 1,
+ },
+ [SI476X_IDX_MAX_TUNE_ERROR] = {
+ .ops = &si476x_ctrl_ops,
+ .id = V4L2_CID_SI476X_MAX_TUNE_ERROR,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+ .name = "Max Tune Errors",
+ .min = 0,
+ .max = 126 * 2,
+ .step = 2,
+ },
+
+ /**
+ * #V4L2_CID_SI476X_HARMONICS_COUNT -- number of harmonics
+ * built-in power-line noise supression filter is to reject
+ * during AM-mode operation.
+ */
+ [SI476X_IDX_HARMONICS_COUNT] = {
+ .ops = &si476x_ctrl_ops,
+ .id = V4L2_CID_SI476X_HARMONICS_COUNT,
+ .type = V4L2_CTRL_TYPE_INTEGER,
+
+ .name = "Count of Harmonics to Reject",
+ .min = 0,
+ .max = 20,
+ .step = 1,
+ },
+
+ /**
+ * #V4L2_CID_SI476X_DIVERSITY_MODE -- configuration which
+ * two tuners working in diversity mode are to work in.
+ *
+ * - #SI476X_IDX_PHDIV_DISABLED diversity mode disabled
+ * - #SI476X_IDX_PHDIV_PRIMARY_COMBINING diversity mode is
+ * on, primary tuner's antenna is the main one.
+ * - #SI476X_IDX_PHDIV_PRIMARY_ANTENNA diversity mode is
+ * off, primary tuner's antenna is the main one.
+ * - #SI476X_IDX_PHDIV_SECONDARY_ANTENNA diversity mode is
+ * off, secondary tuner's antenna is the main one.
+ * - #SI476X_IDX_PHDIV_SECONDARY_COMBINING diversity mode is
+ * on, secondary tuner's antenna is the main one.
+ */
+ [SI476X_IDX_DIVERSITY_MODE] = {
+ .ops = &si476x_ctrl_ops,
+ .id = V4L2_CID_SI476X_DIVERSITY_MODE,
+ .type = V4L2_CTRL_TYPE_MENU,
+ .name = "Phase Diversity Mode",
+ .qmenu = phase_diversity_modes,
+ .min = 0,
+ .max = ARRAY_SIZE(phase_diversity_modes) - 1,
+ },
+
+ /**
+ * #V4L2_CID_SI476X_INTERCHIP_LINK -- inter-chip link in
+ * diversity mode indicator. Allows user to determine if two
+ * chips working in diversity mode have established a link
+ * between each other and if the system as a whole uses
+ * signals from both antennas to receive FM radio.
+ */
+ [SI476X_IDX_INTERCHIP_LINK] = {
+ .ops = &si476x_ctrl_ops,
+ .id = V4L2_CID_SI476X_INTERCHIP_LINK,
+ .type = V4L2_CTRL_TYPE_BOOLEAN,
+ .flags = V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_VOLATILE,
+ .name = "Inter-Chip Link",
+ .min = 0,
+ .max = 1,
+ .step = 1,
+ },
+};
+
+struct si476x_radio;
+
+/**
+ * struct si476x_radio_ops - vtable of tuner functions
+ *
+ * This table holds pointers to functions implementing particular
+ * operations depending on the mode in which the tuner chip was
+ * configured to start in. If the function is not supported
+ * corresponding element is set to #NULL.
+ *
+ * @tune_freq: Tune chip to a specific frequency
+ * @seek_start: Star station seeking
+ * @rsq_status: Get Recieved Signal Quality(RSQ) status
+ * @rds_blckcnt: Get recived RDS blocks count
+ * @phase_diversity: Change phase diversity mode of the tuner
+ * @phase_div_status: Get phase diversity mode status
+ * @acf_status: Get the status of Automatically Controlled
+ * Features(ACF)
+ * @agc_status: Get Automatic Gain Control(AGC) status
+ */
+struct si476x_radio_ops {
+ int (*tune_freq)(struct si476x_core *, struct si476x_tune_freq_args *);
+ int (*seek_start)(struct si476x_core *, bool, bool);
+ int (*rsq_status)(struct si476x_core *, struct si476x_rsq_status_args *,
+ struct si476x_rsq_status_report *);
+ int (*rds_blckcnt)(struct si476x_core *, bool,
+ struct si476x_rds_blockcount_report *);
+
+ int (*phase_diversity)(struct si476x_core *,
+ enum si476x_phase_diversity_mode);
+ int (*phase_div_status)(struct si476x_core *);
+ int (*acf_status)(struct si476x_core *,
+ struct si476x_acf_status_report *);
+ int (*agc_status)(struct si476x_core *,
+ struct si476x_agc_status_report *);
+};
+
+/**
+ * struct si476x_radio - radio device
+ *
+ * @core: Pointer to underlying core device
+ * @videodev: Pointer to video device created by V4L2 subsystem
+ * @ops: Vtable of functions. See struct si476x_radio_ops for details
+ * @kref: Reference counter
+ * @core_lock: An r/w semaphore to brebvent the deletion of underlying
+ * core structure is the radio device is being used
+ */
+struct si476x_radio {
+ struct v4l2_device v4l2dev;
+ struct video_device videodev;
+ struct v4l2_ctrl_handler ctrl_handler;
+
+ struct si476x_core *core;
+ /* This field should not be accesses unless core lock is held */
+ const struct si476x_radio_ops *ops;
+
+ struct dentry *debugfs;
+ u32 audmode;
+};
+
+static inline struct si476x_radio *v4l2_dev_to_radio(struct v4l2_device *d)
+{
+ return container_of(d, struct si476x_radio, v4l2dev);
+}
+
+static inline struct si476x_radio *v4l2_ctrl_handler_to_radio(struct v4l2_ctrl_handler *d)
+{
+ return container_of(d, struct si476x_radio, ctrl_handler);
+}
+
+/*
+ * si476x_vidioc_querycap - query device capabilities
+ */
+static int si476x_radio_querycap(struct file *file, void *priv,
+ struct v4l2_capability *capability)
+{
+ struct si476x_radio *radio = video_drvdata(file);
+
+ strlcpy(capability->driver, radio->v4l2dev.name,
+ sizeof(capability->driver));
+ strlcpy(capability->card, DRIVER_CARD, sizeof(capability->card));
+ snprintf(capability->bus_info, sizeof(capability->bus_info),
+ "platform:%s", radio->v4l2dev.name);
+
+ capability->device_caps = V4L2_CAP_TUNER
+ | V4L2_CAP_RADIO
+ | V4L2_CAP_HW_FREQ_SEEK;
+
+ si476x_core_lock(radio->core);
+ if (!si476x_core_is_a_secondary_tuner(radio->core))
+ capability->device_caps |= V4L2_CAP_RDS_CAPTURE
+ | V4L2_CAP_READWRITE;
+ si476x_core_unlock(radio->core);
+
+ capability->capabilities = capability->device_caps | V4L2_CAP_DEVICE_CAPS;
+ return 0;
+}
+
+static int si476x_radio_enum_freq_bands(struct file *file, void *priv,
+ struct v4l2_frequency_band *band)
+{
+ int err;
+ struct si476x_radio *radio = video_drvdata(file);
+
+ if (band->tuner != 0)
+ return -EINVAL;
+
+ switch (radio->core->chip_id) {
+ /* AM/FM tuners -- all bands are supported */
+ case SI476X_CHIP_SI4761:
+ case SI476X_CHIP_SI4764:
+ if (band->index < ARRAY_SIZE(si476x_bands)) {
+ *band = si476x_bands[band->index];
+ err = 0;
+ } else {
+ err = -EINVAL;
+ }
+ break;
+ /* FM companion tuner chips -- only FM bands are
+ * supported */
+ case SI476X_CHIP_SI4768:
+ if (band->index == SI476X_BAND_FM) {
+ *band = si476x_bands[band->index];
+ err = 0;
+ } else {
+ err = -EINVAL;
+ }
+ break;
+ default:
+ err = -EINVAL;
+ }
+
+ return err;
+}
+
+static int si476x_radio_g_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *tuner)
+{
+ int err;
+ struct si476x_rsq_status_report report;
+ struct si476x_radio *radio = video_drvdata(file);
+
+ struct si476x_rsq_status_args args = {
+ .primary = false,
+ .rsqack = false,
+ .attune = false,
+ .cancel = false,
+ .stcack = false,
+ };
+
+ if (tuner->index != 0)
+ return -EINVAL;
+
+ tuner->type = V4L2_TUNER_RADIO;
+ tuner->capability = V4L2_TUNER_CAP_LOW /* Measure frequencies
+ * in multiples of
+ * 62.5 Hz */
+ | V4L2_TUNER_CAP_STEREO
+ | V4L2_TUNER_CAP_HWSEEK_BOUNDED
+ | V4L2_TUNER_CAP_HWSEEK_WRAP
+ | V4L2_TUNER_CAP_HWSEEK_PROG_LIM;
+
+ si476x_core_lock(radio->core);
+
+ if (si476x_core_is_a_secondary_tuner(radio->core)) {
+ strlcpy(tuner->name, "FM (secondary)", sizeof(tuner->name));
+ tuner->rxsubchans = 0;
+ tuner->rangelow = si476x_bands[SI476X_BAND_FM].rangelow;
+ } else if (si476x_core_has_am(radio->core)) {
+ if (si476x_core_is_a_primary_tuner(radio->core))
+ strlcpy(tuner->name, "AM/FM (primary)", sizeof(tuner->name));
+ else
+ strlcpy(tuner->name, "AM/FM", sizeof(tuner->name));
+
+ tuner->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO
+ | V4L2_TUNER_SUB_RDS;
+ tuner->capability |= V4L2_TUNER_CAP_RDS
+ | V4L2_TUNER_CAP_RDS_BLOCK_IO
+ | V4L2_TUNER_CAP_FREQ_BANDS;
+
+ tuner->rangelow = si476x_bands[SI476X_BAND_AM].rangelow;
+ } else {
+ strlcpy(tuner->name, "FM", sizeof(tuner->name));
+ tuner->rxsubchans = V4L2_TUNER_SUB_RDS;
+ tuner->capability |= V4L2_TUNER_CAP_RDS
+ | V4L2_TUNER_CAP_RDS_BLOCK_IO
+ | V4L2_TUNER_CAP_FREQ_BANDS;
+ tuner->rangelow = si476x_bands[SI476X_BAND_FM].rangelow;
+ }
+
+ tuner->audmode = radio->audmode;
+
+ tuner->afc = 1;
+ tuner->rangehigh = si476x_bands[SI476X_BAND_FM].rangehigh;
+
+ err = radio->ops->rsq_status(radio->core,
+ &args, &report);
+ if (err < 0) {
+ tuner->signal = 0;
+ } else {
+ /*
+ * tuner->signal value range: 0x0000 .. 0xFFFF,
+ * report.rssi: -128 .. 127
+ */
+ tuner->signal = (report.rssi + 128) * 257;
+ }
+ si476x_core_unlock(radio->core);
+
+ return err;
+}
+
+static int si476x_radio_s_tuner(struct file *file, void *priv,
+ struct v4l2_tuner *tuner)
+{
+ struct si476x_radio *radio = video_drvdata(file);
+
+ if (tuner->index != 0)
+ return -EINVAL;
+
+ if (tuner->audmode == V4L2_TUNER_MODE_MONO ||
+ tuner->audmode == V4L2_TUNER_MODE_STEREO)
+ radio->audmode = tuner->audmode;
+ else
+ radio->audmode = V4L2_TUNER_MODE_STEREO;
+
+ return 0;
+}
+
+static int si476x_radio_init_vtable(struct si476x_radio *radio, enum si476x_func func)
+{
+ static const struct si476x_radio_ops fm_ops = {
+ .tune_freq = si476x_core_cmd_fm_tune_freq,
+ .seek_start = si476x_core_cmd_fm_seek_start,
+ .rsq_status = si476x_core_cmd_fm_rsq_status,
+ .rds_blckcnt = si476x_core_cmd_fm_rds_blockcount,
+ .phase_diversity = si476x_core_cmd_fm_phase_diversity,
+ .phase_div_status = si476x_core_cmd_fm_phase_div_status,
+ .acf_status = si476x_core_cmd_fm_acf_status,
+ .agc_status = si476x_core_cmd_agc_status,
+ };
+
+ static const struct si476x_radio_ops am_ops = {
+ .tune_freq = si476x_core_cmd_am_tune_freq,
+ .seek_start = si476x_core_cmd_am_seek_start,
+ .rsq_status = si476x_core_cmd_am_rsq_status,
+ .rds_blckcnt = NULL,
+ .phase_diversity = NULL,
+ .phase_div_status = NULL,
+ .acf_status = si476x_core_cmd_am_acf_status,
+ .agc_status = NULL,
+ };
+
+ switch (func) {
+ case SI476X_FUNC_FM_RECEIVER:
+ radio->ops = &fm_ops;
+ return 0;
+
+ case SI476X_FUNC_AM_RECEIVER:
+ radio->ops = &am_ops;
+ return 0;
+ default:
+ WARN(1, "Unexpected tuner function value\n");
+ return -EINVAL;
+ }
+}
+
+static int si476x_radio_pretune(struct si476x_radio *radio, enum si476x_func func)
+{
+ int retval;
+
+ struct si476x_tune_freq_args args = {
+ .zifsr = false,
+ .hd = false,
+ .injside = SI476X_INJSIDE_AUTO,
+ .tunemode = SI476X_TM_VALIDATED_NORMAL_TUNE,
+ .smoothmetrics = SI476X_SM_INITIALIZE_AUDIO,
+ .antcap = 0,
+ };
+
+ switch (func) {
+ case SI476X_FUNC_FM_RECEIVER:
+ args.freq = v4l2_to_si476x(radio->core,
+ 92 * FREQ_MUL);
+ retval = radio->ops->tune_freq(radio->core, &args);
+ break;
+ case SI476X_FUNC_AM_RECEIVER:
+ args.freq = v4l2_to_si476x(radio->core,
+ 0.6 * FREQ_MUL);
+ retval = radio->ops->tune_freq(radio->core, &args);
+ break;
+ default:
+ WARN(1, "Unexpected tuner function value\n");
+ retval = -EINVAL;
+ }
+
+ return retval;
+}
+static int si476x_radio_do_post_powerup_init(struct si476x_radio *radio, enum si476x_func func)
+{
+ int err;
+
+ /* regcache_mark_dirty(radio->core->regmap); */
+ err = regcache_sync_region(radio->core->regmap,
+ SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE,
+ SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT);
+ if (err < 0)
+ return err;
+
+ err = regcache_sync_region(radio->core->regmap,
+ SI476X_PROP_AUDIO_DEEMPHASIS,
+ SI476X_PROP_AUDIO_PWR_LINE_FILTER);
+ if (err < 0)
+ return err;
+
+ err = regcache_sync_region(radio->core->regmap,
+ SI476X_PROP_INT_CTL_ENABLE,
+ SI476X_PROP_INT_CTL_ENABLE);
+ if (err < 0)
+ return err;
+
+ /*
+ * Is there any point in restoring SNR and the like
+ * when switching between AM/FM?
+ */
+ err = regcache_sync_region(radio->core->regmap,
+ SI476X_PROP_VALID_MAX_TUNE_ERROR,
+ SI476X_PROP_VALID_MAX_TUNE_ERROR);
+ if (err < 0)
+ return err;
+
+ err = regcache_sync_region(radio->core->regmap,
+ SI476X_PROP_VALID_SNR_THRESHOLD,
+ SI476X_PROP_VALID_RSSI_THRESHOLD);
+ if (err < 0)
+ return err;
+
+ if (func == SI476X_FUNC_FM_RECEIVER) {
+ if (si476x_core_has_diversity(radio->core)) {
+ err = si476x_core_cmd_fm_phase_diversity(radio->core,
+ radio->core->diversity_mode);
+ if (err < 0)
+ return err;
+ }
+
+ err = regcache_sync_region(radio->core->regmap,
+ SI476X_PROP_FM_RDS_INTERRUPT_SOURCE,
+ SI476X_PROP_FM_RDS_CONFIG);
+ if (err < 0)
+ return err;
+ }
+
+ return si476x_radio_init_vtable(radio, func);
+
+}
+
+static int si476x_radio_change_func(struct si476x_radio *radio, enum si476x_func func)
+{
+ int err;
+ bool soft;
+ /*
+ * Since power/up down is a very time consuming operation,
+ * try to avoid doing it if the requested mode matches the one
+ * the tuner is in
+ */
+ if (func == radio->core->power_up_parameters.func)
+ return 0;
+
+ soft = true;
+ err = si476x_core_stop(radio->core, soft);
+ if (err < 0) {
+ /*
+ * OK, if the chip does not want to play nice let's
+ * try to reset it in more brutal way
+ */
+ soft = false;
+ err = si476x_core_stop(radio->core, soft);
+ if (err < 0)
+ return err;
+ }
+ /*
+ Set the desired radio tuner function
+ */
+ radio->core->power_up_parameters.func = func;
+
+ err = si476x_core_start(radio->core, soft);
+ if (err < 0)
+ return err;
+
+ /*
+ * No need to do the rest of manipulations for the bootlader
+ * mode
+ */
+ if (func != SI476X_FUNC_FM_RECEIVER &&
+ func != SI476X_FUNC_AM_RECEIVER)
+ return err;
+
+ return si476x_radio_do_post_powerup_init(radio, func);
+}
+
+static int si476x_radio_g_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ int err;
+ struct si476x_radio *radio = video_drvdata(file);
+
+ if (f->tuner != 0 ||
+ f->type != V4L2_TUNER_RADIO)
+ return -EINVAL;
+
+ si476x_core_lock(radio->core);
+
+ if (radio->ops->rsq_status) {
+ struct si476x_rsq_status_report report;
+ struct si476x_rsq_status_args args = {
+ .primary = false,
+ .rsqack = false,
+ .attune = true,
+ .cancel = false,
+ .stcack = false,
+ };
+
+ err = radio->ops->rsq_status(radio->core, &args, &report);
+ if (!err)
+ f->frequency = si476x_to_v4l2(radio->core,
+ report.readfreq);
+ } else {
+ err = -EINVAL;
+ }
+
+ si476x_core_unlock(radio->core);
+
+ return err;
+}
+
+static int si476x_radio_s_frequency(struct file *file, void *priv,
+ struct v4l2_frequency *f)
+{
+ int err;
+ struct si476x_tune_freq_args args;
+ struct si476x_radio *radio = video_drvdata(file);
+
+ const u32 midrange = (si476x_bands[SI476X_BAND_AM].rangehigh +
+ si476x_bands[SI476X_BAND_FM].rangelow) / 2;
+ const int band = (f->frequency > midrange) ? SI476X_BAND_FM : SI476X_BAND_AM;
+ const enum si476x_func func = (band == SI476X_BAND_AM) ?
+ SI476X_FUNC_AM_RECEIVER : SI476X_FUNC_FM_RECEIVER;
+
+ if (f->tuner != 0 ||
+ f->type != V4L2_TUNER_RADIO)
+ return -EINVAL;
+
+ si476x_core_lock(radio->core);
+
+ f->frequency = clamp(f->frequency,
+ si476x_bands[band].rangelow,
+ si476x_bands[band].rangehigh);
+
+ if (si476x_radio_freq_is_inside_of_the_band(f->frequency, SI476X_BAND_AM) &&
+ (!si476x_core_has_am(radio->core) || si476x_core_is_a_secondary_tuner(radio->core))) {
+ err = -EINVAL;
+ goto unlock;
+ }
+
+ err = si476x_radio_change_func(radio, func);
+ if (err < 0)
+ goto unlock;
+
+ args.zifsr = false;
+ args.hd = false;
+ args.injside = SI476X_INJSIDE_AUTO;
+ args.freq = v4l2_to_si476x(radio->core,
+ f->frequency);
+ args.tunemode = SI476X_TM_VALIDATED_NORMAL_TUNE;
+ args.smoothmetrics = SI476X_SM_INITIALIZE_AUDIO;
+ args.antcap = 0;
+
+ err = radio->ops->tune_freq(radio->core, &args);
+
+unlock:
+ si476x_core_unlock(radio->core);
+ return err;
+}
+
+static int si476x_radio_s_hw_freq_seek(struct file *file, void *priv,
+ const struct v4l2_hw_freq_seek *seek)
+{
+ int err;
+ enum si476x_func func;
+ u32 rangelow, rangehigh;
+ struct si476x_radio *radio = video_drvdata(file);
+
+ if (file->f_flags & O_NONBLOCK)
+ return -EAGAIN;
+
+ if (seek->tuner != 0 ||
+ seek->type != V4L2_TUNER_RADIO)
+ return -EINVAL;
+
+ si476x_core_lock(radio->core);
+
+ if(!seek->rangelow) {
+ err = regmap_read(radio->core->regmap,
+ SI476X_PROP_SEEK_BAND_BOTTOM,
+ &rangelow);
+ if (!err)
+ rangelow = si476x_to_v4l2(radio->core, rangelow);
+ else
+ goto unlock;
+ }
+ if(!seek->rangehigh) {
+ err = regmap_read(radio->core->regmap,
+ SI476X_PROP_SEEK_BAND_TOP,
+ &rangehigh);
+ if (!err)
+ rangehigh = si476x_to_v4l2(radio->core, rangehigh);
+ else
+ goto unlock;
+ }
+
+ if (rangelow > rangehigh) {
+ err = -EINVAL;
+ goto unlock;
+ }
+
+ if (si476x_radio_range_is_inside_of_the_band(rangelow, rangehigh,
+ SI476X_BAND_FM)) {
+ func = SI476X_FUNC_FM_RECEIVER;
+
+ } else if (si476x_core_has_am(radio->core) &&
+ si476x_radio_range_is_inside_of_the_band(rangelow, rangehigh,
+ SI476X_BAND_AM)) {
+ func = SI476X_FUNC_AM_RECEIVER;
+ } else {
+ err = -EINVAL;
+ goto unlock;
+ }
+
+ err = si476x_radio_change_func(radio, func);
+ if (err < 0) {
+ goto unlock;
+ }
+
+ if (seek->rangehigh) {
+ err = regmap_write(radio->core->regmap,
+ SI476X_PROP_SEEK_BAND_TOP,
+ v4l2_to_si476x(radio->core,
+ seek->rangehigh));
+ if (err)
+ goto unlock;
+ }
+ if (seek->rangelow) {
+ err = regmap_write(radio->core->regmap,
+ SI476X_PROP_SEEK_BAND_BOTTOM,
+ v4l2_to_si476x(radio->core,
+ seek->rangelow));
+ if (err)
+ goto unlock;
+ }
+ if (seek->spacing) {
+ err = regmap_write(radio->core->regmap,
+ SI476X_PROP_SEEK_FREQUENCY_SPACING,
+ v4l2_to_si476x(radio->core,
+ seek->spacing));
+ if (err)
+ goto unlock;
+ }
+
+ err = radio->ops->seek_start(radio->core,
+ seek->seek_upward,
+ seek->wrap_around);
+unlock:
+ si476x_core_unlock(radio->core);
+
+
+
+ return err;
+}
+
+static int si476x_radio_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
+{
+ int retval;
+ struct si476x_radio *radio = v4l2_ctrl_handler_to_radio(ctrl->handler);
+
+ si476x_core_lock(radio->core);
+
+ switch (ctrl->id) {
+ case V4L2_CID_SI476X_INTERCHIP_LINK:
+ if (si476x_core_has_diversity(radio->core)) {
+ if (radio->ops->phase_diversity) {
+ retval = radio->ops->phase_div_status(radio->core);
+ if (retval < 0)
+ break;
+
+ ctrl->val = !!SI476X_PHDIV_STATUS_LINK_LOCKED(retval);
+ retval = 0;
+ break;
+ } else {
+ retval = -ENOTTY;
+ break;
+ }
+ }
+ retval = -EINVAL;
+ break;
+ default:
+ retval = -EINVAL;
+ break;
+ }
+ si476x_core_unlock(radio->core);
+ return retval;
+
+}
+
+static int si476x_radio_s_ctrl(struct v4l2_ctrl *ctrl)
+{
+ int retval;
+ enum si476x_phase_diversity_mode mode;
+ struct si476x_radio *radio = v4l2_ctrl_handler_to_radio(ctrl->handler);
+
+ si476x_core_lock(radio->core);
+
+ switch (ctrl->id) {
+ case V4L2_CID_SI476X_HARMONICS_COUNT:
+ retval = regmap_update_bits(radio->core->regmap,
+ SI476X_PROP_AUDIO_PWR_LINE_FILTER,
+ SI476X_PROP_PWR_HARMONICS_MASK,
+ ctrl->val);
+ break;
+ case V4L2_CID_POWER_LINE_FREQUENCY:
+ switch (ctrl->val) {
+ case V4L2_CID_POWER_LINE_FREQUENCY_DISABLED:
+ retval = regmap_update_bits(radio->core->regmap,
+ SI476X_PROP_AUDIO_PWR_LINE_FILTER,
+ SI476X_PROP_PWR_ENABLE_MASK,
+ 0);
+ break;
+ case V4L2_CID_POWER_LINE_FREQUENCY_50HZ:
+ retval = regmap_update_bits(radio->core->regmap,
+ SI476X_PROP_AUDIO_PWR_LINE_FILTER,
+ SI476X_PROP_PWR_GRID_MASK,
+ SI476X_PROP_PWR_GRID_50HZ);
+ break;
+ case V4L2_CID_POWER_LINE_FREQUENCY_60HZ:
+ retval = regmap_update_bits(radio->core->regmap,
+ SI476X_PROP_AUDIO_PWR_LINE_FILTER,
+ SI476X_PROP_PWR_GRID_MASK,
+ SI476X_PROP_PWR_GRID_60HZ);
+ break;
+ default:
+ retval = -EINVAL;
+ break;
+ }
+ break;
+ case V4L2_CID_SI476X_RSSI_THRESHOLD:
+ retval = regmap_write(radio->core->regmap,
+ SI476X_PROP_VALID_RSSI_THRESHOLD,
+ ctrl->val);
+ break;
+ case V4L2_CID_SI476X_SNR_THRESHOLD:
+ retval = regmap_write(radio->core->regmap,
+ SI476X_PROP_VALID_SNR_THRESHOLD,
+ ctrl->val);
+ break;
+ case V4L2_CID_SI476X_MAX_TUNE_ERROR:
+ retval = regmap_write(radio->core->regmap,
+ SI476X_PROP_VALID_MAX_TUNE_ERROR,
+ ctrl->val);
+ break;
+ case V4L2_CID_RDS_RECEPTION:
+ /*
+ * It looks like RDS related properties are
+ * inaccesable when tuner is in AM mode, so cache the
+ * changes
+ */
+ if(si476x_core_is_in_am_receiver_mode(radio->core))
+ regcache_cache_only(radio->core->regmap, true);
+
+ if (ctrl->val) {
+ retval = regmap_write(radio->core->regmap,
+ SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT,
+ radio->core->rds_fifo_depth);
+ if (retval < 0)
+ break;
+
+ if (radio->core->client->irq) {
+ retval = regmap_write(radio->core->regmap,
+ SI476X_PROP_FM_RDS_INTERRUPT_SOURCE,
+ SI476X_RDSRECV);
+ if (retval < 0)
+ break;
+ }
+
+ /* Drain RDS FIFO before enabling RDS processing */
+ retval = si476x_core_cmd_fm_rds_status(radio->core, false,
+ true, true, NULL);
+ if (retval < 0)
+ break;
+
+ retval = regmap_update_bits(radio->core->regmap,
+ SI476X_PROP_FM_RDS_CONFIG,
+ SI476X_PROP_RDSEN_MASK,
+ SI476X_PROP_RDSEN);
+ } else {
+ retval = regmap_update_bits(radio->core->regmap,
+ SI476X_PROP_FM_RDS_CONFIG,
+ SI476X_PROP_RDSEN_MASK,
+ !SI476X_PROP_RDSEN);
+ }
+
+ if(si476x_core_is_in_am_receiver_mode(radio->core))
+ regcache_cache_only(radio->core->regmap, false);
+ break;
+ case V4L2_CID_TUNE_DEEMPHASIS:
+ retval = regmap_write(radio->core->regmap,
+ SI476X_PROP_AUDIO_DEEMPHASIS,
+ ctrl->val);
+ break;
+
+ case V4L2_CID_SI476X_DIVERSITY_MODE:
+ mode = si476x_phase_diversity_idx_to_mode(ctrl->val);
+
+ if (mode == radio->core->diversity_mode) {
+ retval = 0;
+ break;
+ }
+
+ if(si476x_core_is_in_am_receiver_mode(radio->core)) {
+ /*
+ * Diversity cannot be configured while tuner
+ * is in AM mode so save the changes and carry on.
+ */
+ radio->core->diversity_mode = mode;
+ retval = 0;
+ } else {
+ retval = radio->ops->phase_diversity(radio->core, mode);
+ if (!retval)
+ radio->core->diversity_mode = mode;
+ }
+ break;
+
+ default:
+ retval = -EINVAL;
+ break;
+ }
+
+ si476x_core_unlock(radio->core);
+
+ return retval;
+}
+
+static int si476x_radio_g_chip_ident(struct file *file, void *fh,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ if (chip->match.type == V4L2_CHIP_MATCH_HOST &&
+ v4l2_chip_match_host(&chip->match))
+ return 0;
+ return -EINVAL;
+}
+
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int si476x_radio_g_register(struct file *file, void *fh,
+ struct v4l2_dbg_register *reg)
+{
+ int err;
+ unsigned int value;
+ struct si476x_radio *radio = video_drvdata(file);
+
+ si476x_core_lock(radio->core);
+ reg->size = 2;
+ err = regmap_read(radio->core->regmap,
+ (unsigned int)reg->reg, &value);
+ reg->val = value;
+ si476x_core_unlock(radio->core);
+
+ return err;
+}
+static int si476x_radio_s_register(struct file *file, void *fh,
+ struct v4l2_dbg_register *reg)
+{
+
+ int err;
+ struct si476x_radio *radio = video_drvdata(file);
+
+ si476x_core_lock(radio->core);
+ err = regmap_write(radio->core->regmap,
+ (unsigned int)reg->reg,
+ (unsigned int)reg->val);
+ si476x_core_unlock(radio->core);
+
+ return err;
+}
+#endif
+
+static int si476x_radio_fops_open(struct file *file)
+{
+ struct si476x_radio *radio = video_drvdata(file);
+ int err;
+
+ err = v4l2_fh_open(file);
+ if (err)
+ return err;
+
+ if (v4l2_fh_is_singular_file(file)) {
+ si476x_core_lock(radio->core);
+ err = si476x_core_set_power_state(radio->core,
+ SI476X_POWER_UP_FULL);
+ if (err < 0)
+ goto done;
+
+ err = si476x_radio_do_post_powerup_init(radio,
+ radio->core->power_up_parameters.func);
+ if (err < 0)
+ goto power_down;
+
+ err = si476x_radio_pretune(radio,
+ radio->core->power_up_parameters.func);
+ if (err < 0)
+ goto power_down;
+
+ si476x_core_unlock(radio->core);
+ /* Must be done after si476x_core_unlock to prevent a deadlock */
+ v4l2_ctrl_handler_setup(&radio->ctrl_handler);
+ }
+
+ return err;
+
+power_down:
+ si476x_core_set_power_state(radio->core,
+ SI476X_POWER_DOWN);
+done:
+ si476x_core_unlock(radio->core);
+ v4l2_fh_release(file);
+
+ return err;
+}
+
+static int si476x_radio_fops_release(struct file *file)
+{
+ int err;
+ struct si476x_radio *radio = video_drvdata(file);
+
+ if (v4l2_fh_is_singular_file(file) &&
+ atomic_read(&radio->core->is_alive))
+ si476x_core_set_power_state(radio->core,
+ SI476X_POWER_DOWN);
+
+ err = v4l2_fh_release(file);
+
+ return err;
+}
+
+static ssize_t si476x_radio_fops_read(struct file *file, char __user *buf,
+ size_t count, loff_t *ppos)
+{
+ ssize_t rval;
+ size_t fifo_len;
+ unsigned int copied;
+
+ struct si476x_radio *radio = video_drvdata(file);
+
+ /* block if no new data available */
+ if (kfifo_is_empty(&radio->core->rds_fifo)) {
+ if (file->f_flags & O_NONBLOCK)
+ return -EWOULDBLOCK;
+
+ rval = wait_event_interruptible(radio->core->rds_read_queue,
+ (!kfifo_is_empty(&radio->core->rds_fifo) ||
+ !atomic_read(&radio->core->is_alive)));
+ if (rval < 0)
+ return -EINTR;
+
+ if (!atomic_read(&radio->core->is_alive))
+ return -ENODEV;
+ }
+
+ fifo_len = kfifo_len(&radio->core->rds_fifo);
+
+ if (kfifo_to_user(&radio->core->rds_fifo, buf,
+ min(fifo_len, count),
+ &copied) != 0) {
+ dev_warn(&radio->videodev.dev,
+ "Error during FIFO to userspace copy\n");
+ rval = -EIO;
+ } else {
+ rval = (ssize_t)copied;
+ }
+
+ return rval;
+}
+
+static unsigned int si476x_radio_fops_poll(struct file *file,
+ struct poll_table_struct *pts)
+{
+ struct si476x_radio *radio = video_drvdata(file);
+ unsigned long req_events = poll_requested_events(pts);
+ unsigned int err = v4l2_ctrl_poll(file, pts);
+
+ if (req_events & (POLLIN | POLLRDNORM)) {
+ if (atomic_read(&radio->core->is_alive))
+ poll_wait(file, &radio->core->rds_read_queue, pts);
+
+ if (!atomic_read(&radio->core->is_alive))
+ err = POLLHUP;
+
+ if (!kfifo_is_empty(&radio->core->rds_fifo))
+ err = POLLIN | POLLRDNORM;
+ }
+
+ return err;
+}
+
+static const struct v4l2_file_operations si476x_fops = {
+ .owner = THIS_MODULE,
+ .read = si476x_radio_fops_read,
+ .poll = si476x_radio_fops_poll,
+ .unlocked_ioctl = video_ioctl2,
+ .open = si476x_radio_fops_open,
+ .release = si476x_radio_fops_release,
+};
+
+
+static const struct v4l2_ioctl_ops si4761_ioctl_ops = {
+ .vidioc_querycap = si476x_radio_querycap,
+ .vidioc_g_tuner = si476x_radio_g_tuner,
+ .vidioc_s_tuner = si476x_radio_s_tuner,
+
+ .vidioc_g_frequency = si476x_radio_g_frequency,
+ .vidioc_s_frequency = si476x_radio_s_frequency,
+ .vidioc_s_hw_freq_seek = si476x_radio_s_hw_freq_seek,
+ .vidioc_enum_freq_bands = si476x_radio_enum_freq_bands,
+
+ .vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+ .vidioc_unsubscribe_event = v4l2_event_unsubscribe,
+
+ .vidioc_g_chip_ident = si476x_radio_g_chip_ident,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .vidioc_g_register = si476x_radio_g_register,
+ .vidioc_s_register = si476x_radio_s_register,
+#endif
+};
+
+
+static const struct video_device si476x_viddev_template = {
+ .fops = &si476x_fops,
+ .name = DRIVER_NAME,
+ .release = video_device_release_empty,
+};
+
+
+
+static ssize_t si476x_radio_read_acf_blob(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ int err;
+ struct si476x_radio *radio = file->private_data;
+ struct si476x_acf_status_report report;
+
+ si476x_core_lock(radio->core);
+ if (radio->ops->acf_status)
+ err = radio->ops->acf_status(radio->core, &report);
+ else
+ err = -ENOENT;
+ si476x_core_unlock(radio->core);
+
+ if (err < 0)
+ return err;
+
+ return simple_read_from_buffer(user_buf, count, ppos, &report,
+ sizeof(report));
+}
+
+static const struct file_operations radio_acf_fops = {
+ .open = simple_open,
+ .llseek = default_llseek,
+ .read = si476x_radio_read_acf_blob,
+};
+
+static ssize_t si476x_radio_read_rds_blckcnt_blob(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ int err;
+ struct si476x_radio *radio = file->private_data;
+ struct si476x_rds_blockcount_report report;
+
+ si476x_core_lock(radio->core);
+ if (radio->ops->rds_blckcnt)
+ err = radio->ops->rds_blckcnt(radio->core, true,
+ &report);
+ else
+ err = -ENOENT;
+ si476x_core_unlock(radio->core);
+
+ if (err < 0)
+ return err;
+
+ return simple_read_from_buffer(user_buf, count, ppos, &report,
+ sizeof(report));
+}
+
+static const struct file_operations radio_rds_blckcnt_fops = {
+ .open = simple_open,
+ .llseek = default_llseek,
+ .read = si476x_radio_read_rds_blckcnt_blob,
+};
+
+static ssize_t si476x_radio_read_agc_blob(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ int err;
+ struct si476x_radio *radio = file->private_data;
+ struct si476x_agc_status_report report;
+
+ si476x_core_lock(radio->core);
+ if (radio->ops->rds_blckcnt)
+ err = radio->ops->agc_status(radio->core, &report);
+ else
+ err = -ENOENT;
+ si476x_core_unlock(radio->core);
+
+ if (err < 0)
+ return err;
+
+ return simple_read_from_buffer(user_buf, count, ppos, &report,
+ sizeof(report));
+}
+
+static const struct file_operations radio_agc_fops = {
+ .open = simple_open,
+ .llseek = default_llseek,
+ .read = si476x_radio_read_agc_blob,
+};
+
+static ssize_t si476x_radio_read_rsq_blob(struct file *file, char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ int err;
+ struct si476x_radio *radio = file->private_data;
+ struct si476x_rsq_status_report report;
+ struct si476x_rsq_status_args args = {
+ .primary = false,
+ .rsqack = false,
+ .attune = false,
+ .cancel = false,
+ .stcack = false,
+ };
+
+ si476x_core_lock(radio->core);
+ if (radio->ops->rds_blckcnt)
+ err = radio->ops->rsq_status(radio->core, &args, &report);
+ else
+ err = -ENOENT;
+ si476x_core_unlock(radio->core);
+
+ if (err < 0)
+ return err;
+
+ return simple_read_from_buffer(user_buf, count, ppos, &report,
+ sizeof(report));
+}
+
+static const struct file_operations radio_rsq_fops = {
+ .open = simple_open,
+ .llseek = default_llseek,
+ .read = si476x_radio_read_rsq_blob,
+};
+
+static ssize_t si476x_radio_read_rsq_primary_blob(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ int err;
+ struct si476x_radio *radio = file->private_data;
+ struct si476x_rsq_status_report report;
+ struct si476x_rsq_status_args args = {
+ .primary = true,
+ .rsqack = false,
+ .attune = false,
+ .cancel = false,
+ .stcack = false,
+ };
+
+ si476x_core_lock(radio->core);
+ if (radio->ops->rds_blckcnt)
+ err = radio->ops->rsq_status(radio->core, &args, &report);
+ else
+ err = -ENOENT;
+ si476x_core_unlock(radio->core);
+
+ if (err < 0)
+ return err;
+
+ return simple_read_from_buffer(user_buf, count, ppos, &report,
+ sizeof(report));
+}
+
+static const struct file_operations radio_rsq_primary_fops = {
+ .open = simple_open,
+ .llseek = default_llseek,
+ .read = si476x_radio_read_rsq_primary_blob,
+};
+
+
+static int si476x_radio_init_debugfs(struct si476x_radio *radio)
+{
+ struct dentry *dentry;
+ int ret;
+
+ dentry = debugfs_create_dir(dev_name(radio->v4l2dev.dev), NULL);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto exit;
+ }
+ radio->debugfs = dentry;
+
+ dentry = debugfs_create_file("acf", S_IRUGO,
+ radio->debugfs, radio, &radio_acf_fops);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto cleanup;
+ }
+
+ dentry = debugfs_create_file("rds_blckcnt", S_IRUGO,
+ radio->debugfs, radio, &radio_rds_blckcnt_fops);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto cleanup;
+ }
+
+ dentry = debugfs_create_file("agc", S_IRUGO,
+ radio->debugfs, radio, &radio_agc_fops);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto cleanup;
+ }
+
+ dentry = debugfs_create_file("rsq", S_IRUGO,
+ radio->debugfs, radio, &radio_rsq_fops);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto cleanup;
+ }
+
+ dentry = debugfs_create_file("rsq_primary", S_IRUGO,
+ radio->debugfs, radio, &radio_rsq_primary_fops);
+ if (IS_ERR(dentry)) {
+ ret = PTR_ERR(dentry);
+ goto cleanup;
+ }
+
+ return 0;
+cleanup:
+ debugfs_remove_recursive(radio->debugfs);
+exit:
+ return ret;
+}
+
+
+static int si476x_radio_add_new_custom(struct si476x_radio *radio,
+ enum si476x_ctrl_idx idx)
+{
+ int rval;
+ struct v4l2_ctrl *ctrl;
+
+ ctrl = v4l2_ctrl_new_custom(&radio->ctrl_handler,
+ &si476x_ctrls[idx],
+ NULL);
+ rval = radio->ctrl_handler.error;
+ if (ctrl == NULL && rval)
+ dev_err(radio->v4l2dev.dev, "Could not initialize '%s' control %d\n",
+ si476x_ctrls[idx].name, rval);
+
+ return rval;
+}
+
+static int si476x_radio_probe(struct platform_device *pdev)
+{
+ int rval;
+ struct si476x_radio *radio;
+ struct v4l2_ctrl *ctrl;
+
+ static atomic_t instance = ATOMIC_INIT(0);
+
+ radio = devm_kzalloc(&pdev->dev, sizeof(*radio), GFP_KERNEL);
+ if (!radio)
+ return -ENOMEM;
+
+ radio->core = i2c_mfd_cell_to_core(&pdev->dev);
+
+ v4l2_device_set_name(&radio->v4l2dev, DRIVER_NAME, &instance);
+
+ rval = v4l2_device_register(&pdev->dev, &radio->v4l2dev);
+ if (rval) {
+ dev_err(&pdev->dev, "Cannot register v4l2_device.\n");
+ return rval;
+ }
+
+ memcpy(&radio->videodev, &si476x_viddev_template,
+ sizeof(struct video_device));
+
+ radio->videodev.v4l2_dev = &radio->v4l2dev;
+ radio->videodev.ioctl_ops = &si4761_ioctl_ops;
+
+ video_set_drvdata(&radio->videodev, radio);
+ platform_set_drvdata(pdev, radio);
+
+ set_bit(V4L2_FL_USE_FH_PRIO, &radio->videodev.flags);
+
+ radio->v4l2dev.ctrl_handler = &radio->ctrl_handler;
+ v4l2_ctrl_handler_init(&radio->ctrl_handler, 1 + ARRAY_SIZE(si476x_ctrls));
+
+ if (si476x_core_has_am(radio->core)) {
+ ctrl = v4l2_ctrl_new_std_menu(&radio->ctrl_handler,
+ &si476x_ctrl_ops,
+ V4L2_CID_POWER_LINE_FREQUENCY,
+ V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0, 0);
+ rval = radio->ctrl_handler.error;
+ if (ctrl == NULL && rval) {
+ dev_err(&pdev->dev, "Could not initialize V4L2_CID_POWER_LINE_FREQUENCY control %d\n",
+ rval);
+ goto exit;
+ }
+
+ rval = si476x_radio_add_new_custom(radio, SI476X_IDX_HARMONICS_COUNT);
+ if (rval < 0)
+ goto exit;
+ }
+
+ rval = si476x_radio_add_new_custom(radio, SI476X_IDX_RSSI_THRESHOLD);
+ if (rval < 0)
+ goto exit;
+
+ rval = si476x_radio_add_new_custom(radio, SI476X_IDX_SNR_THRESHOLD);
+ if (rval < 0)
+ goto exit;
+
+ rval = si476x_radio_add_new_custom(radio, SI476X_IDX_MAX_TUNE_ERROR);
+ if (rval < 0)
+ goto exit;
+
+ ctrl = v4l2_ctrl_new_std_menu(&radio->ctrl_handler,
+ &si476x_ctrl_ops,
+ V4L2_CID_TUNE_DEEMPHASIS,
+ V4L2_DEEMPHASIS_75_uS, 0, 0);
+ rval = radio->ctrl_handler.error;
+ if (ctrl == NULL && rval) {
+ dev_err(&pdev->dev, "Could not initialize V4L2_CID_TUNE_DEEMPHASIS control %d\n",
+ rval);
+ goto exit;
+ }
+
+ ctrl = v4l2_ctrl_new_std(&radio->ctrl_handler, &si476x_ctrl_ops,
+ V4L2_CID_RDS_RECEPTION,
+ 0, 1, 1, 1);
+ rval = radio->ctrl_handler.error;
+ if (ctrl == NULL && rval) {
+ dev_err(&pdev->dev, "Could not initialize V4L2_CID_RDS_RECEPTION control %d\n",
+ rval);
+ goto exit;
+ }
+
+ if (si476x_core_has_diversity(radio->core)) {
+ si476x_ctrls[SI476X_IDX_DIVERSITY_MODE].def =
+ si476x_phase_diversity_mode_to_idx(radio->core->diversity_mode);
+ si476x_radio_add_new_custom(radio, SI476X_IDX_DIVERSITY_MODE);
+ if (rval < 0)
+ goto exit;
+
+ si476x_radio_add_new_custom(radio, SI476X_IDX_INTERCHIP_LINK);
+ if (rval < 0)
+ goto exit;
+ }
+
+ /* register video device */
+ rval = video_register_device(&radio->videodev, VFL_TYPE_RADIO, -1);
+ if (rval < 0) {
+ dev_err(&pdev->dev, "Could not register video device\n");
+ goto exit;
+ }
+
+ rval = si476x_radio_init_debugfs(radio);
+ if (rval < 0) {
+ dev_err(&pdev->dev, "Could not creat debugfs interface\n");
+ goto exit;
+ }
+
+ return 0;
+exit:
+ v4l2_ctrl_handler_free(radio->videodev.ctrl_handler);
+ return rval;
+}
+
+static int si476x_radio_remove(struct platform_device *pdev)
+{
+ struct si476x_radio *radio = platform_get_drvdata(pdev);
+
+ v4l2_ctrl_handler_free(radio->videodev.ctrl_handler);
+ video_unregister_device(&radio->videodev);
+ v4l2_device_unregister(&radio->v4l2dev);
+ debugfs_remove_recursive(radio->debugfs);
+
+ return 0;
+}
+
+MODULE_ALIAS("platform:si476x-radio");
+
+static struct platform_driver si476x_radio_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = si476x_radio_probe,
+ .remove = si476x_radio_remove,
+};
+module_platform_driver(si476x_radio_driver);
+
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_DESCRIPTION("Driver for Si4761/64/68 AM/FM Radio MFD Cell");
+MODULE_LICENSE("GPL");
diff --git a/include/media/si476x.h b/include/media/si476x.h
new file mode 100644
index 0000000..e0e433d
--- /dev/null
+++ b/include/media/si476x.h
@@ -0,0 +1,426 @@
+/*
+ * include/media/si476x.h -- Common definitions for si476x driver
+ *
+ * Copyright (C) 2012 Innovative Converged Devices(ICD)
+ * Copyright (C) 2013 Andrey Smirnov
+ *
+ * Author: Andrey Smirnov <andrew.smirnov@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef SI476X_H
+#define SI476X_H
+
+#include <linux/types.h>
+#include <linux/videodev2.h>
+
+struct si476x_device;
+
+/* It is possible to select one of the four adresses using pins A0
+ * and A1 on SI476x */
+#define SI476X_I2C_ADDR_1 0x60
+#define SI476X_I2C_ADDR_2 0x61
+#define SI476X_I2C_ADDR_3 0x62
+#define SI476X_I2C_ADDR_4 0x63
+
+enum si476x_iqclk_config {
+ SI476X_IQCLK_NOOP = 0,
+ SI476X_IQCLK_TRISTATE = 1,
+ SI476X_IQCLK_IQ = 21,
+};
+enum si476x_iqfs_config {
+ SI476X_IQFS_NOOP = 0,
+ SI476X_IQFS_TRISTATE = 1,
+ SI476X_IQFS_IQ = 21,
+};
+enum si476x_iout_config {
+ SI476X_IOUT_NOOP = 0,
+ SI476X_IOUT_TRISTATE = 1,
+ SI476X_IOUT_OUTPUT = 22,
+};
+enum si476x_qout_config {
+ SI476X_QOUT_NOOP = 0,
+ SI476X_QOUT_TRISTATE = 1,
+ SI476X_QOUT_OUTPUT = 22,
+};
+
+enum si476x_dclk_config {
+ SI476X_DCLK_NOOP = 0,
+ SI476X_DCLK_TRISTATE = 1,
+ SI476X_DCLK_DAUDIO = 10,
+};
+
+enum si476x_dfs_config {
+ SI476X_DFS_NOOP = 0,
+ SI476X_DFS_TRISTATE = 1,
+ SI476X_DFS_DAUDIO = 10,
+};
+
+enum si476x_dout_config {
+ SI476X_DOUT_NOOP = 0,
+ SI476X_DOUT_TRISTATE = 1,
+ SI476X_DOUT_I2S_OUTPUT = 12,
+ SI476X_DOUT_I2S_INPUT = 13,
+};
+
+enum si476x_xout_config {
+ SI476X_XOUT_NOOP = 0,
+ SI476X_XOUT_TRISTATE = 1,
+ SI476X_XOUT_I2S_INPUT = 13,
+ SI476X_XOUT_MODE_SELECT = 23,
+};
+
+
+enum si476x_icin_config {
+ SI476X_ICIN_NOOP = 0,
+ SI476X_ICIN_TRISTATE = 1,
+ SI476X_ICIN_GPO1_HIGH = 2,
+ SI476X_ICIN_GPO1_LOW = 3,
+ SI476X_ICIN_IC_LINK = 30,
+};
+
+enum si476x_icip_config {
+ SI476X_ICIP_NOOP = 0,
+ SI476X_ICIP_TRISTATE = 1,
+ SI476X_ICIP_GPO2_HIGH = 2,
+ SI476X_ICIP_GPO2_LOW = 3,
+ SI476X_ICIP_IC_LINK = 30,
+};
+
+enum si476x_icon_config {
+ SI476X_ICON_NOOP = 0,
+ SI476X_ICON_TRISTATE = 1,
+ SI476X_ICON_I2S = 10,
+ SI476X_ICON_IC_LINK = 30,
+};
+
+enum si476x_icop_config {
+ SI476X_ICOP_NOOP = 0,
+ SI476X_ICOP_TRISTATE = 1,
+ SI476X_ICOP_I2S = 10,
+ SI476X_ICOP_IC_LINK = 30,
+};
+
+
+enum si476x_lrout_config {
+ SI476X_LROUT_NOOP = 0,
+ SI476X_LROUT_TRISTATE = 1,
+ SI476X_LROUT_AUDIO = 2,
+ SI476X_LROUT_MPX = 3,
+};
+
+
+enum si476x_intb_config {
+ SI476X_INTB_NOOP = 0,
+ SI476X_INTB_TRISTATE = 1,
+ SI476X_INTB_DAUDIO = 10,
+ SI476X_INTB_IRQ = 40,
+};
+
+enum si476x_a1_config {
+ SI476X_A1_NOOP = 0,
+ SI476X_A1_TRISTATE = 1,
+ SI476X_A1_IRQ = 40,
+};
+
+enum si476x_part_revisions {
+ SI476X_REVISION_A10 = 0,
+ SI476X_REVISION_A20 = 1,
+ SI476X_REVISION_A30 = 2,
+};
+
+struct si476x_pinmux {
+ enum si476x_dclk_config dclk;
+ enum si476x_dfs_config dfs;
+ enum si476x_dout_config dout;
+ enum si476x_xout_config xout;
+
+ enum si476x_iqclk_config iqclk;
+ enum si476x_iqfs_config iqfs;
+ enum si476x_iout_config iout;
+ enum si476x_qout_config qout;
+
+ enum si476x_icin_config icin;
+ enum si476x_icip_config icip;
+ enum si476x_icon_config icon;
+ enum si476x_icop_config icop;
+
+ enum si476x_lrout_config lrout;
+
+ enum si476x_intb_config intb;
+ enum si476x_a1_config a1;
+};
+
+/**
+ * enum si476x_phase_diversity_mode - possbile phase diversity modes
+ * for SI4764/5/6/7 chips.
+ *
+ * @SI476X_PHDIV_DISABLED: Phase diversity feature is
+ * disabled.
+ * @SI476X_PHDIV_PRIMARY_COMBINING: Tuner works as a primary tuner
+ * in combination with a
+ * secondary one.
+ * @SI476X_PHDIV_PRIMARY_ANTENNA: Tuner works as a primary tuner
+ * using only its own antenna.
+ * @SI476X_PHDIV_SECONDARY_ANTENNA: Tuner works as a primary tuner
+ * usning seconary tuner's antenna.
+ * @SI476X_PHDIV_SECONDARY_COMBINING: Tuner works as a secondary
+ * tuner in combination with the
+ * primary one.
+ */
+enum si476x_phase_diversity_mode {
+ SI476X_PHDIV_DISABLED = 0,
+ SI476X_PHDIV_PRIMARY_COMBINING = 1,
+ SI476X_PHDIV_PRIMARY_ANTENNA = 2,
+ SI476X_PHDIV_SECONDARY_ANTENNA = 3,
+ SI476X_PHDIV_SECONDARY_COMBINING = 5,
+};
+
+enum si476x_ibias6x {
+ SI476X_IBIAS6X_OTHER = 0,
+ SI476X_IBIAS6X_RCVR1_NON_4MHZ_CLK = 1,
+};
+
+enum si476x_xstart {
+ SI476X_XSTART_MULTIPLE_TUNER = 0x11,
+ SI476X_XSTART_NORMAL = 0x77,
+};
+
+enum si476x_freq {
+ SI476X_FREQ_4_MHZ = 0,
+ SI476X_FREQ_37P209375_MHZ = 1,
+ SI476X_FREQ_36P4_MHZ = 2,
+ SI476X_FREQ_37P8_MHZ = 3,
+};
+
+enum si476x_xmode {
+ SI476X_XMODE_CRYSTAL_RCVR1 = 1,
+ SI476X_XMODE_EXT_CLOCK = 2,
+ SI476X_XMODE_CRYSTAL_RCVR2_3 = 3,
+};
+
+enum si476x_xbiashc {
+ SI476X_XBIASHC_SINGLE_RECEIVER = 0,
+ SI476X_XBIASHC_MULTIPLE_RECEIVER = 1,
+};
+
+enum si476x_xbias {
+ SI476X_XBIAS_RCVR2_3 = 0,
+ SI476X_XBIAS_4MHZ_RCVR1 = 3,
+ SI476X_XBIAS_RCVR1 = 7,
+};
+
+enum si476x_func {
+ SI476X_FUNC_BOOTLOADER = 0,
+ SI476X_FUNC_FM_RECEIVER = 1,
+ SI476X_FUNC_AM_RECEIVER = 2,
+ SI476X_FUNC_WB_RECEIVER = 3,
+};
+
+
+/**
+ * @xcload: Selects the amount of additional on-chip capacitance to
+ * be connected between XTAL1 and gnd and between XTAL2 and
+ * GND. One half of the capacitance value shown here is the
+ * additional load capacitance presented to the xtal. The
+ * minimum step size is 0.277 pF. Recommended value is 0x28
+ * but it will be layout dependent. Range is 0–0x3F i.e.
+ * (0–16.33 pF)
+ * @ctsien: enable CTSINT(interrupt request when CTS condition
+ * arises) when set
+ * @intsel: when set A1 pin becomes the interrupt pin; otherwise,
+ * INTB is the interrupt pin
+ * @func: selects the boot function of the device. I.e.
+ * SI476X_BOOTLOADER - Boot loader
+ * SI476X_FM_RECEIVER - FM receiver
+ * SI476X_AM_RECEIVER - AM receiver
+ * SI476X_WB_RECEIVER - Weatherband receiver
+ * @freq: oscillator's crystal frequency:
+ * SI476X_XTAL_37P209375_MHZ - 37.209375 Mhz
+ * SI476X_XTAL_36P4_MHZ - 36.4 Mhz
+ * SI476X_XTAL_37P8_MHZ - 37.8 Mhz
+ */
+struct si476x_power_up_args {
+ enum si476x_ibias6x ibias6x;
+ enum si476x_xstart xstart;
+ u8 xcload;
+ bool fastboot;
+ enum si476x_xbiashc xbiashc;
+ enum si476x_xbias xbias;
+ enum si476x_func func;
+ enum si476x_freq freq;
+ enum si476x_xmode xmode;
+};
+
+
+enum si476x_ctrl_id {
+ V4L2_CID_SI476X_RSSI_THRESHOLD = (V4L2_CID_USER_SI476X_BASE + 1),
+ V4L2_CID_SI476X_SNR_THRESHOLD = (V4L2_CID_USER_SI476X_BASE + 2),
+ V4L2_CID_SI476X_MAX_TUNE_ERROR = (V4L2_CID_USER_SI476X_BASE + 3),
+ V4L2_CID_SI476X_HARMONICS_COUNT = (V4L2_CID_USER_SI476X_BASE + 4),
+ V4L2_CID_SI476X_DIVERSITY_MODE = (V4L2_CID_USER_SI476X_BASE + 5),
+ V4L2_CID_SI476X_INTERCHIP_LINK = (V4L2_CID_USER_SI476X_BASE + 6),
+};
+
+/*
+ * Platform dependent definition
+ */
+struct si476x_platform_data {
+ int gpio_reset; /* < 0 if not used */
+
+ struct si476x_power_up_args power_up_parameters;
+ enum si476x_phase_diversity_mode diversity_mode;
+
+ struct si476x_pinmux pinmux;
+};
+
+/**
+ * struct si476x_rsq_status - structure containing received signal
+ * quality
+ * @multhint: Multipath Detect High.
+ * true - Indicatedes that the value is below
+ * FM_RSQ_MULTIPATH_HIGH_THRESHOLD
+ * false - Indicatedes that the value is above
+ * FM_RSQ_MULTIPATH_HIGH_THRESHOLD
+ * @multlint: Multipath Detect Low.
+ * true - Indicatedes that the value is below
+ * FM_RSQ_MULTIPATH_LOW_THRESHOLD
+ * false - Indicatedes that the value is above
+ * FM_RSQ_MULTIPATH_LOW_THRESHOLD
+ * @snrhint: SNR Detect High.
+ * true - Indicatedes that the value is below
+ * FM_RSQ_SNR_HIGH_THRESHOLD
+ * false - Indicatedes that the value is above
+ * FM_RSQ_SNR_HIGH_THRESHOLD
+ * @snrlint: SNR Detect Low.
+ * true - Indicatedes that the value is below
+ * FM_RSQ_SNR_LOW_THRESHOLD
+ * false - Indicatedes that the value is above
+ * FM_RSQ_SNR_LOW_THRESHOLD
+ * @rssihint: RSSI Detect High.
+ * true - Indicatedes that the value is below
+ * FM_RSQ_RSSI_HIGH_THRESHOLD
+ * false - Indicatedes that the value is above
+ * FM_RSQ_RSSI_HIGH_THRESHOLD
+ * @rssilint: RSSI Detect Low.
+ * true - Indicatedes that the value is below
+ * FM_RSQ_RSSI_LOW_THRESHOLD
+ * false - Indicatedes that the value is above
+ * FM_RSQ_RSSI_LOW_THRESHOLD
+ * @bltf: Band Limit.
+ * Set if seek command hits the band limit or wrapped to
+ * the original frequency.
+ * @snr_ready: SNR measurement in progress.
+ * @rssiready: RSSI measurement in progress.
+ * @afcrl: Set if FREQOFF >= MAX_TUNE_ERROR
+ * @valid: Set if the channel is valid
+ * rssi < FM_VALID_RSSI_THRESHOLD
+ * snr < FM_VALID_SNR_THRESHOLD
+ * tune_error < FM_VALID_MAX_TUNE_ERROR
+ * @readfreq: Current tuned frequency.
+ * @freqoff: Signed frequency offset.
+ * @rssi: Received Signal Strength Indicator(dBuV).
+ * @snr: RF SNR Indicator(dB).
+ * @lassi:
+ * @hassi: Low/High side Adjacent(100 kHz) Channel Strength Indicator
+ * @mult: Multipath indicator
+ * @dev: Who knows? But values may vary.
+ * @readantcap: Antenna tuning capacity value.
+ * @assi: Adjacent Channel(+/- 200kHz) Strength Indicator
+ * @usn: Ultrasonic Noise Inticator in -DBFS
+ */
+struct si476x_rsq_status_report {
+ __u8 multhint, multlint;
+ __u8 snrhint, snrlint;
+ __u8 rssihint, rssilint;
+ __u8 bltf;
+ __u8 snr_ready;
+ __u8 rssiready;
+ __u8 injside;
+ __u8 afcrl;
+ __u8 valid;
+
+ __u16 readfreq;
+ __s8 freqoff;
+ __s8 rssi;
+ __s8 snr;
+ __s8 issi;
+ __s8 lassi, hassi;
+ __s8 mult;
+ __u8 dev;
+ __u16 readantcap;
+ __s8 assi;
+ __s8 usn;
+
+ __u8 pilotdev;
+ __u8 rdsdev;
+ __u8 assidev;
+ __u8 strongdev;
+ __u16 rdspi;
+} __attribute__((packed));
+
+/**
+ * si476x_acf_status_report - ACF report results
+ *
+ * @blend_int: If set, indicates that stereo separation has crossed
+ * below the blend threshold as set by FM_ACF_BLEND_THRESHOLD
+ * @hblend_int: If set, indicates that HiBlend cutoff frequency is
+ * lower than threshold as set by FM_ACF_HBLEND_THRESHOLD
+ * @hicut_int: If set, indicates that HiCut cutoff frequency is lower
+ * than the threshold set by ACF_
+
+ */
+struct si476x_acf_status_report {
+ __u8 blend_int;
+ __u8 hblend_int;
+ __u8 hicut_int;
+ __u8 chbw_int;
+ __u8 softmute_int;
+ __u8 smute;
+ __u8 smattn;
+ __u8 chbw;
+ __u8 hicut;
+ __u8 hiblend;
+ __u8 pilot;
+ __u8 stblend;
+} __attribute__((packed));
+
+enum si476x_fmagc {
+ SI476X_FMAGC_10K_OHM = 0,
+ SI476X_FMAGC_800_OHM = 1,
+ SI476X_FMAGC_400_OHM = 2,
+ SI476X_FMAGC_200_OHM = 4,
+ SI476X_FMAGC_100_OHM = 8,
+ SI476X_FMAGC_50_OHM = 16,
+ SI476X_FMAGC_25_OHM = 32,
+ SI476X_FMAGC_12P5_OHM = 64,
+ SI476X_FMAGC_6P25_OHM = 128,
+};
+
+struct si476x_agc_status_report {
+ __u8 mxhi;
+ __u8 mxlo;
+ __u8 lnahi;
+ __u8 lnalo;
+ __u8 fmagc1;
+ __u8 fmagc2;
+ __u8 pgagain;
+ __u8 fmwblang;
+} __attribute__((packed));
+
+struct si476x_rds_blockcount_report {
+ __u16 expected;
+ __u16 received;
+ __u16 uncorrectable;
+} __attribute__((packed));
+
+#endif /* SI476X_H*/
--
1.7.10.4
^ permalink raw reply related [flat|nested] 13+ messages in thread