From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Ben Hutchings <bhutchings@solarflare.com>
Subject: [ 23/72] sfc: Disable VF queues during register self-test
Date: Tue, 26 Mar 2013 15:51:06 -0700 [thread overview]
Message-ID: <20130326224922.091511429@linuxfoundation.org> (raw)
In-Reply-To: <20130326224919.675227837@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ben Hutchings <bhutchings@solarflare.com>
[ Upstream commit d4f2cecce138c34960c467d0ae38a6d4bcd6af7b ]
Currently VF queues and drivers may remain active during this test.
This could cause memory corruption or spurious test failures.
Therefore we reset the port/function before running these tests on
Siena.
On Falcon this doesn't work: we have to do some additional
initialisation before some blocks will work again. So refactor the
reset/register-test sequence into an efx_nic_type method so
efx_selftest() doesn't have to consider such quirks.
In the process, fix another minor bug: Siena does not have an
'invisible' reset and the self-test currently fails to push the PHY
configuration after resetting. Passing RESET_TYPE_ALL to
efx_reset_{down,up}() fixes this.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/sfc/falcon.c | 35 +++++++++++++++++--
drivers/net/ethernet/sfc/net_driver.h | 7 ++-
drivers/net/ethernet/sfc/nic.c | 3 -
drivers/net/ethernet/sfc/selftest.c | 62 ++++++++--------------------------
drivers/net/ethernet/sfc/siena.c | 29 +++++++++++++--
5 files changed, 76 insertions(+), 60 deletions(-)
--- a/drivers/net/ethernet/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
@@ -25,9 +25,12 @@
#include "io.h"
#include "phy.h"
#include "workarounds.h"
+#include "selftest.h"
/* Hardware control for SFC4000 (aka Falcon). */
+static int falcon_reset_hw(struct efx_nic *efx, enum reset_type method);
+
static const unsigned int
/* "Large" EEPROM device: Atmel AT25640 or similar
* 8 KB, 16-bit address, 32 B write block */
@@ -1034,10 +1037,34 @@ static const struct efx_nic_register_tes
EFX_OWORD32(0x0003FF0F, 0x00000000, 0x00000000, 0x00000000) },
};
-static int falcon_b0_test_registers(struct efx_nic *efx)
+static int
+falcon_b0_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
{
- return efx_nic_test_registers(efx, falcon_b0_register_tests,
- ARRAY_SIZE(falcon_b0_register_tests));
+ enum reset_type reset_method = RESET_TYPE_INVISIBLE;
+ int rc, rc2;
+
+ mutex_lock(&efx->mac_lock);
+ if (efx->loopback_modes) {
+ /* We need the 312 clock from the PHY to test the XMAC
+ * registers, so move into XGMII loopback if available */
+ if (efx->loopback_modes & (1 << LOOPBACK_XGMII))
+ efx->loopback_mode = LOOPBACK_XGMII;
+ else
+ efx->loopback_mode = __ffs(efx->loopback_modes);
+ }
+ __efx_reconfigure_port(efx);
+ mutex_unlock(&efx->mac_lock);
+
+ efx_reset_down(efx, reset_method);
+
+ tests->registers =
+ efx_nic_test_registers(efx, falcon_b0_register_tests,
+ ARRAY_SIZE(falcon_b0_register_tests))
+ ? -1 : 1;
+
+ rc = falcon_reset_hw(efx, reset_method);
+ rc2 = efx_reset_up(efx, reset_method, rc == 0);
+ return rc ? rc : rc2;
}
/**************************************************************************
@@ -1820,7 +1847,7 @@ const struct efx_nic_type falcon_b0_nic_
.get_wol = falcon_get_wol,
.set_wol = falcon_set_wol,
.resume_wol = efx_port_dummy_op_void,
- .test_registers = falcon_b0_test_registers,
+ .test_chip = falcon_b0_test_chip,
.test_nvram = falcon_test_nvram,
.revision = EFX_REV_FALCON_B0,
--- a/drivers/net/ethernet/sfc/net_driver.h
+++ b/drivers/net/ethernet/sfc/net_driver.h
@@ -68,6 +68,8 @@
#define EFX_TXQ_TYPES 4
#define EFX_MAX_TX_QUEUES (EFX_TXQ_TYPES * EFX_MAX_CHANNELS)
+struct efx_self_tests;
+
/**
* struct efx_special_buffer - An Efx special buffer
* @addr: CPU base address of the buffer
@@ -901,7 +903,8 @@ static inline unsigned int efx_port_num(
* @get_wol: Get WoL configuration from driver state
* @set_wol: Push WoL configuration to the NIC
* @resume_wol: Synchronise WoL state between driver and MC (e.g. after resume)
- * @test_registers: Test read/write functionality of control registers
+ * @test_chip: Test registers. Should use efx_nic_test_registers(), and is
+ * expected to reset the NIC.
* @test_nvram: Test validity of NVRAM contents
* @revision: Hardware architecture revision
* @mem_map_size: Memory BAR mapped size
@@ -947,7 +950,7 @@ struct efx_nic_type {
void (*get_wol)(struct efx_nic *efx, struct ethtool_wolinfo *wol);
int (*set_wol)(struct efx_nic *efx, u32 type);
void (*resume_wol)(struct efx_nic *efx);
- int (*test_registers)(struct efx_nic *efx);
+ int (*test_chip)(struct efx_nic *efx, struct efx_self_tests *tests);
int (*test_nvram)(struct efx_nic *efx);
int revision;
--- a/drivers/net/ethernet/sfc/nic.c
+++ b/drivers/net/ethernet/sfc/nic.c
@@ -126,9 +126,6 @@ int efx_nic_test_registers(struct efx_ni
unsigned address = 0, i, j;
efx_oword_t mask, imask, original, reg, buf;
- /* Falcon should be in loopback to isolate the XMAC from the PHY */
- WARN_ON(!LOOPBACK_INTERNAL(efx));
-
for (i = 0; i < n_regs; ++i) {
address = regs[i].address;
mask = imask = regs[i].mask;
--- a/drivers/net/ethernet/sfc/selftest.c
+++ b/drivers/net/ethernet/sfc/selftest.c
@@ -120,19 +120,6 @@ static int efx_test_nvram(struct efx_nic
return rc;
}
-static int efx_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
-{
- int rc = 0;
-
- /* Test register access */
- if (efx->type->test_registers) {
- rc = efx->type->test_registers(efx);
- tests->registers = rc ? -1 : 1;
- }
-
- return rc;
-}
-
/**************************************************************************
*
* Interrupt and event queue testing
@@ -699,8 +686,7 @@ int efx_selftest(struct efx_nic *efx, st
{
enum efx_loopback_mode loopback_mode = efx->loopback_mode;
int phy_mode = efx->phy_mode;
- enum reset_type reset_method = RESET_TYPE_INVISIBLE;
- int rc_test = 0, rc_reset = 0, rc;
+ int rc_test = 0, rc_reset, rc;
efx_selftest_async_cancel(efx);
@@ -737,44 +723,26 @@ int efx_selftest(struct efx_nic *efx, st
*/
efx_device_detach_sync(efx);
- mutex_lock(&efx->mac_lock);
- if (efx->loopback_modes) {
- /* We need the 312 clock from the PHY to test the XMAC
- * registers, so move into XGMII loopback if available */
- if (efx->loopback_modes & (1 << LOOPBACK_XGMII))
- efx->loopback_mode = LOOPBACK_XGMII;
- else
- efx->loopback_mode = __ffs(efx->loopback_modes);
- }
-
- __efx_reconfigure_port(efx);
- mutex_unlock(&efx->mac_lock);
-
- /* free up all consumers of SRAM (including all the queues) */
- efx_reset_down(efx, reset_method);
-
- rc = efx_test_chip(efx, tests);
- if (rc && !rc_test)
- rc_test = rc;
+ if (efx->type->test_chip) {
+ rc_reset = efx->type->test_chip(efx, tests);
+ if (rc_reset) {
+ netif_err(efx, hw, efx->net_dev,
+ "Unable to recover from chip test\n");
+ efx_schedule_reset(efx, RESET_TYPE_DISABLE);
+ return rc_reset;
+ }
- /* reset the chip to recover from the register test */
- rc_reset = efx->type->reset(efx, reset_method);
+ if ((tests->registers < 0) && !rc_test)
+ rc_test = -EIO;
+ }
/* Ensure that the phy is powered and out of loopback
* for the bist and loopback tests */
+ mutex_lock(&efx->mac_lock);
efx->phy_mode &= ~PHY_MODE_LOW_POWER;
efx->loopback_mode = LOOPBACK_NONE;
-
- rc = efx_reset_up(efx, reset_method, rc_reset == 0);
- if (rc && !rc_reset)
- rc_reset = rc;
-
- if (rc_reset) {
- netif_err(efx, drv, efx->net_dev,
- "Unable to recover from chip test\n");
- efx_schedule_reset(efx, RESET_TYPE_DISABLE);
- return rc_reset;
- }
+ __efx_reconfigure_port(efx);
+ mutex_unlock(&efx->mac_lock);
rc = efx_test_phy(efx, tests, flags);
if (rc && !rc_test)
--- a/drivers/net/ethernet/sfc/siena.c
+++ b/drivers/net/ethernet/sfc/siena.c
@@ -25,10 +25,12 @@
#include "workarounds.h"
#include "mcdi.h"
#include "mcdi_pcol.h"
+#include "selftest.h"
/* Hardware control for SFC9000 family including SFL9021 (aka Siena). */
static void siena_init_wol(struct efx_nic *efx);
+static int siena_reset_hw(struct efx_nic *efx, enum reset_type method);
static void siena_push_irq_moderation(struct efx_channel *channel)
@@ -166,10 +168,29 @@ static const struct efx_nic_register_tes
EFX_OWORD32(0xFFFFFFFF, 0xFFFFFFFF, 0x00000007, 0x00000000) },
};
-static int siena_test_registers(struct efx_nic *efx)
+static int siena_test_chip(struct efx_nic *efx, struct efx_self_tests *tests)
{
- return efx_nic_test_registers(efx, siena_register_tests,
- ARRAY_SIZE(siena_register_tests));
+ enum reset_type reset_method = reset_method;
+ int rc, rc2;
+
+ efx_reset_down(efx, reset_method);
+
+ /* Reset the chip immediately so that it is completely
+ * quiescent regardless of what any VF driver does.
+ */
+ rc = siena_reset_hw(efx, reset_method);
+ if (rc)
+ goto out;
+
+ tests->registers =
+ efx_nic_test_registers(efx, siena_register_tests,
+ ARRAY_SIZE(siena_register_tests))
+ ? -1 : 1;
+
+ rc = siena_reset_hw(efx, reset_method);
+out:
+ rc2 = efx_reset_up(efx, reset_method, rc == 0);
+ return rc ? rc : rc2;
}
/**************************************************************************
@@ -662,7 +683,7 @@ const struct efx_nic_type siena_a0_nic_t
.get_wol = siena_get_wol,
.set_wol = siena_set_wol,
.resume_wol = siena_init_wol,
- .test_registers = siena_test_registers,
+ .test_chip = siena_test_chip,
.test_nvram = efx_mcdi_nvram_test_all,
.revision = EFX_REV_SIENA_A0,
next prev parent reply other threads:[~2013-03-26 23:24 UTC|newest]
Thread overview: 75+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-26 22:50 [ 00/72] 3.4.38-stable review Greg Kroah-Hartman
2013-03-26 22:50 ` [ 01/72] Revert "USB: EHCI: dont check DMA values in QH overlays" Greg Kroah-Hartman
2013-03-26 22:50 ` [ 02/72] sunsu: Fix panic in case of nonexistent port at "console=ttySY" cmdline option Greg Kroah-Hartman
2013-03-26 22:50 ` [ 03/72] net/ipv4: Ensure that location of timestamp option is stored Greg Kroah-Hartman
2013-03-26 22:50 ` [ 04/72] netconsole: dont call __netpoll_cleanup() while atomic Greg Kroah-Hartman
2013-03-26 22:50 ` [ 05/72] bonding: dont call update_speed_duplex() under spinlocks Greg Kroah-Hartman
2013-03-26 22:50 ` [ 06/72] tg3: 5715 does not link up when autoneg off Greg Kroah-Hartman
2013-03-26 22:50 ` [ 07/72] sctp: Use correct sideffect command in duplicate cookie handling Greg Kroah-Hartman
2013-03-26 22:50 ` [ 08/72] sctp: dont break the loop while meeting the active_path so as to find the matched transport Greg Kroah-Hartman
2013-03-26 22:50 ` [ 09/72] ipv4: fix definition of FIB_TABLE_HASHSZ Greg Kroah-Hartman
2013-03-26 22:50 ` [ 10/72] tcp: fix skb_availroom() Greg Kroah-Hartman
2013-03-26 22:50 ` [ 11/72] rtnetlink: Mask the rta_type when range checking Greg Kroah-Hartman
2013-03-26 22:50 ` [ 12/72] vhost/net: fix heads usage of ubuf_info Greg Kroah-Hartman
2013-03-26 22:50 ` [ 13/72] bnx2x: fix occasional statistics off-by-4GB error Greg Kroah-Hartman
2013-03-26 22:50 ` [ 14/72] inet: limit length of fragment queue hash table bucket lists Greg Kroah-Hartman
2013-03-26 22:50 ` [ 15/72] sfc: Do not attempt to flush queues if DMA is disabled Greg Kroah-Hartman
2013-03-26 22:50 ` [ 16/72] sfc: Convert firmware subtypes to native byte order in efx_mcdi_get_board_cfg() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 17/72] sfc: Add parentheses around use of bitfield macro arguments Greg Kroah-Hartman
2013-03-26 22:51 ` [ 18/72] sfc: Fix MCDI structure field lookup Greg Kroah-Hartman
2013-03-26 22:51 ` [ 19/72] sfc: Really disable flow control while flushing Greg Kroah-Hartman
2013-03-26 22:51 ` [ 20/72] sfc: Work-around flush timeout when flushes have completed Greg Kroah-Hartman
2013-03-26 22:51 ` [ 21/72] sfc: lock TX queues when calling netif_device_detach() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 22/72] sfc: Fix timekeeping in efx_mcdi_poll() Greg Kroah-Hartman
2013-03-26 22:51 ` Greg Kroah-Hartman [this message]
2013-03-26 22:51 ` [ 24/72] sfc: Avoid generating over-length MC_CMD_FLUSH_RX_QUEUES request Greg Kroah-Hartman
2013-03-26 22:51 ` [ 25/72] sfc: Correctly initialise reset_method in siena_test_chip() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 26/72] sfc: Properly sync RX DMA buffer when it is not the last in the page Greg Kroah-Hartman
2013-03-26 22:51 ` [ 27/72] sfc: Fix efx_rx_buf_offset() in the presence of swiotlb Greg Kroah-Hartman
2013-03-26 22:51 ` [ 28/72] sfc: Detach net device when stopping queues for reconfiguration Greg Kroah-Hartman
2013-03-26 22:51 ` [ 29/72] sfc: Disable soft interrupt handling during efx_device_detach_sync() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 30/72] sfc: Only use TX push if a single descriptor is to be written Greg Kroah-Hartman
2013-03-26 22:51 ` [ 31/72] ALSA: hda/cirrus - Fix the digital beep registration Greg Kroah-Hartman
2013-03-26 22:51 ` [ 32/72] ALSA: hda - Fix typo in checking IEC958 emphasis bit Greg Kroah-Hartman
2013-03-26 22:51 ` [ 33/72] ALSA: snd-usb: mixer: propagate errors up the call chain Greg Kroah-Hartman
2013-03-26 22:51 ` [ 34/72] ALSA: snd-usb: mixer: ignore -EINVAL in snd_usb_mixer_controls() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 35/72] drm/i915: restrict kernel address leak in debugfs Greg Kroah-Hartman
2013-03-26 22:51 ` [ 36/72] tracing: Fix race in snapshot swapping Greg Kroah-Hartman
2013-03-26 22:51 ` [ 37/72] tracing: Fix free of probe entry by calling call_rcu_sched() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 38/72] rtlwifi: rtl8192cu: Fix schedule while atomic bug splat Greg Kroah-Hartman
2013-03-26 22:51 ` [ 39/72] rtlwifi: rtl8192cu: Fix problem that prevents reassociation Greg Kroah-Hartman
2013-03-26 22:51 ` [ 40/72] mwifiex: fix potential out-of-boundary access to ibss rate table Greg Kroah-Hartman
2013-03-26 22:51 ` [ 41/72] drm/i915: bounds check execbuffer relocation count Greg Kroah-Hartman
2013-03-26 22:51 ` [ 42/72] KMS: fix EDID detailed timing vsync parsing Greg Kroah-Hartman
2013-03-26 22:51 ` [ 43/72] KMS: fix EDID detailed timing frame rate Greg Kroah-Hartman
2013-03-26 22:51 ` [ 44/72] mm/hugetlb: fix total hugetlbfs pages count when using memory overcommit accouting Greg Kroah-Hartman
2013-03-26 22:51 ` [ 45/72] target/iscsi: Fix mutual CHAP auth on big-endian arches Greg Kroah-Hartman
2013-03-26 22:51 ` [ 46/72] drm/radeon: add Richland pci ids Greg Kroah-Hartman
2013-03-26 22:51 ` [ 47/72] drm/radeon: add support for Richland APUs Greg Kroah-Hartman
2013-03-26 22:51 ` [ 48/72] drm/radeon/benchmark: make sure bo blit copy exists before using it Greg Kroah-Hartman
2013-03-26 22:51 ` [ 49/72] cifs: ignore everything in SPNEGO blob after mechTypes Greg Kroah-Hartman
2013-03-26 22:51 ` [ 50/72] jbd2: fix use after free in jbd2_journal_dirty_metadata() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 51/72] ext4: fix the wrong number of the allocated blocks in ext4_split_extent() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 52/72] usb-storage: add unusual_devs entry for Samsung YP-Z3 mp3 player Greg Kroah-Hartman
2013-03-26 22:51 ` [ 53/72] ext4: fix data=journal fast mount/umount hang Greg Kroah-Hartman
2013-03-26 22:51 ` [ 54/72] IPoIB: Fix send lockup due to missed TX completion Greg Kroah-Hartman
2013-03-26 22:51 ` [ 55/72] clockevents: Dont allow dummy broadcast timers Greg Kroah-Hartman
2013-03-26 22:51 ` [ 56/72] x86-64: Fix the failure case in copy_user_handle_tail() Greg Kroah-Hartman
2013-03-26 22:51 ` [ 57/72] USB: xhci - fix bit definitions for IMAN register Greg Kroah-Hartman
2013-03-26 22:51 ` [ 58/72] USB: xhci: correctly enable interrupts Greg Kroah-Hartman
2013-03-26 22:51 ` [ 59/72] USB: cdc-acm: fix device unregistration Greg Kroah-Hartman
2013-03-26 22:51 ` [ 60/72] USB: serial: fix interface refcounting Greg Kroah-Hartman
2013-03-26 22:51 ` [ 61/72] nohz: Make tick_nohz_irq_exit() irq safe Greg Kroah-Hartman
2013-03-26 22:51 ` [ 62/72] udf: Fix bitmap overflow on large filesystems with small block size Greg Kroah-Hartman
2013-03-26 22:51 ` [ 63/72] USB: garmin_gps: fix memory leak on disconnect Greg Kroah-Hartman
2013-03-26 22:51 ` [ 64/72] USB: io_ti: fix get_icount for two port adapters Greg Kroah-Hartman
2013-03-26 22:51 ` [ 65/72] key: Fix resource leak Greg Kroah-Hartman
2013-03-26 22:51 ` [ 66/72] isofs: avoid info leak on export Greg Kroah-Hartman
2013-03-26 22:51 ` [ 67/72] udf: " Greg Kroah-Hartman
2013-03-26 22:51 ` [ 68/72] tools: hv: Netlink source address validation allows DoS Greg Kroah-Hartman
2013-03-26 22:51 ` [ 69/72] i915: initialize CADL in opregion Greg Kroah-Hartman
2013-03-26 22:51 ` [ 70/72] exec: use -ELOOP for max recursion depth Greg Kroah-Hartman
2013-03-26 22:51 ` [ 71/72] rt2x00: error in configurations with mesh support disabled Greg Kroah-Hartman
2013-03-26 22:51 ` [ 72/72] asus-laptop: Do not call HWRS on init Greg Kroah-Hartman
2013-03-27 18:33 ` [ 00/72] 3.4.38-stable review Shuah Khan
2013-03-28 14:17 ` Satoru Takeuchi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130326224922.091511429@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=bhutchings@solarflare.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox