[PATCH RESEND] ARM: ux500: update V-INTCORE constraints

Fabio Baltieri
2013-04-02T08:52:22Z

Update V-INTCORE regulator constraints to allow voltage and
configuration changes from consumer drivers.

Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
---
arch/arm/mach-ux500/board-mop500-regulators.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c
index 2a17bc5..0a428db 100644
--- a/arch/arm/mach-ux500/board-mop500-regulators.c
+++ b/arch/arm/mach-ux500/board-mop500-regulators.c
@@ -392,7 +392,15 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
[AB8500_LDO_INTCORE] = {
.constraints = {
.name = "V-INTCORE",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ .min_uV = 1250000,
+ .max_uV = 1350000,
+ .input_uV = 1800000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_STATUS |
+ REGULATOR_CHANGE_MODE |
+ REGULATOR_CHANGE_DRMS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_IDLE,
},
.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
.consumer_supplies = ab8500_vintcore_consumers,
--
1.8.1.3