From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Jan Beulich <jbeulich@suse.com>,
Matthew Garrett <mjg@redhat.com>,
Matt Fleming <matt.fleming@intel.com>,
"H. Peter Anvin" <hpa@linux.intel.com>
Subject: [ 23/29] x86: Fix rebuild with EFI_STUB enabled
Date: Wed, 10 Apr 2013 15:49:41 -0700 [thread overview]
Message-ID: <20130410224806.455886355@linuxfoundation.org> (raw)
In-Reply-To: <20130410224804.061806042@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Beulich <JBeulich@suse.com>
commit 918708245e92941df16a634dc201b407d12bcd91 upstream.
eboot.o and efi_stub_$(BITS).o didn't get added to "targets", and hence
their .cmd files don't get included by the build machinery, leading to
the files always getting rebuilt.
Rather than adding the two files individually, take the opportunity and
add $(VMLINUX_OBJS) to "targets" instead, thus allowing the assignment
at the top of the file to be shrunk quite a bit.
At the same time, remove a pointless flags override line - the variable
assigned to was misspelled anyway, and the options added are
meaningless for assembly sources.
[ hpa: the patch is not minimal, but I am taking it for -urgent anyway
since the excess impact of the patch seems to be small enough. ]
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/515C5D2502000078000CA6AD@nat28.tlf.novell.com
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/boot/compressed/Makefile | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -4,7 +4,7 @@
# create a compressed vmlinux image from the original vmlinux
#
-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo head_$(BITS).o misc.o string.o cmdline.o early_serial_console.o piggy.o
+targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma vmlinux.bin.xz vmlinux.bin.lzo
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -fno-strict-aliasing -fPIC
@@ -29,7 +29,6 @@ VMLINUX_OBJS = $(obj)/vmlinux.lds $(obj)
$(obj)/piggy.o
$(obj)/eboot.o: KBUILD_CFLAGS += -fshort-wchar -mno-red-zone
-$(obj)/efi_stub_$(BITS).o: KBUILD_CLFAGS += -fshort-wchar -mno-red-zone
ifeq ($(CONFIG_EFI_STUB), y)
VMLINUX_OBJS += $(obj)/eboot.o $(obj)/efi_stub_$(BITS).o
@@ -43,7 +42,7 @@ OBJCOPYFLAGS_vmlinux.bin := -R .comment
$(obj)/vmlinux.bin: vmlinux FORCE
$(call if_changed,objcopy)
-targets += vmlinux.bin.all vmlinux.relocs
+targets += $(patsubst $(obj)/%,%,$(VMLINUX_OBJS)) vmlinux.bin.all vmlinux.relocs
CMD_RELOCS = arch/x86/tools/relocs
quiet_cmd_relocs = RELOCS $@
next prev parent reply other threads:[~2013-04-10 22:58 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-10 22:49 [ 00/29] 3.4.40-stable review Greg Kroah-Hartman
2013-04-10 22:49 ` [ 01/29] ASoC: dma-sh7760: Fix compile error Greg Kroah-Hartman
2013-04-10 22:49 ` [ 02/29] regmap: cache Fix regcache-rbtree sync Greg Kroah-Hartman
2013-04-10 22:49 ` [ 03/29] spi/s3c64xx: modified error interrupt handling and init Greg Kroah-Hartman
2013-04-10 22:49 ` [ 04/29] spi/mpc512x-psc: optionally keep PSC SS asserted across xfer segmensts Greg Kroah-Hartman
2013-04-10 22:49 ` [ 05/29] UBIFS: make space fixup work in the remount case Greg Kroah-Hartman
2013-04-10 22:49 ` [ 06/29] reiserfs: Fix warning and inode leak when deleting inode with xattrs Greg Kroah-Hartman
2013-04-10 22:49 ` [ 07/29] ALSA: hda - bug fix on return value when getting HDMI ELD info Greg Kroah-Hartman
2013-04-10 22:49 ` [ 08/29] ALSA: hda - Enabling Realtek ALC 671 codec Greg Kroah-Hartman
2013-04-10 22:49 ` [ 09/29] ALSA: hda - fix typo in proc output Greg Kroah-Hartman
2013-04-10 22:49 ` [ 10/29] EISA/PCI: Init EISA early, before PNP Greg Kroah-Hartman
2013-04-10 22:49 ` [ 11/29] EISA/PCI: Fix bus res reference Greg Kroah-Hartman
2013-04-10 22:49 ` [ 12/29] libata: Use integer return value for atapi_command_packet_set Greg Kroah-Hartman
2013-04-10 22:49 ` [ 13/29] libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive Greg Kroah-Hartman
2013-04-10 22:49 ` [ 14/29] alpha: Add irongate_io to PCI bus resources Greg Kroah-Hartman
2013-04-10 22:49 ` [ 15/29] ata_piix: Fix DVD not dectected at some Haswell platforms Greg Kroah-Hartman
2013-04-10 22:49 ` [ 16/29] ftrace: Consistently restore trace function on sysctl enabling Greg Kroah-Hartman
2013-04-10 22:49 ` [ 17/29] powerpc: pSeries_lpar_hpte_remove fails from Adjunct partition being performed before the ANDCOND test Greg Kroah-Hartman
2013-04-10 22:49 ` [ 18/29] x86: remove the x32 syscall bitmask from syscall_get_nr() Greg Kroah-Hartman
2013-04-10 22:49 ` [ 19/29] hwspinlock: fix __hwspin_lock_request error path Greg Kroah-Hartman
2013-04-10 22:49 ` [ 20/29] spinlocks and preemption points need to be at least compiler barriers Greg Kroah-Hartman
2013-04-10 22:49 ` [ 21/29] crypto: gcm - fix assumption that assoc has one segment Greg Kroah-Hartman
2013-04-10 22:49 ` [ 22/29] block: avoid using uninitialized value in from queue_var_store Greg Kroah-Hartman
2013-04-10 22:49 ` Greg Kroah-Hartman [this message]
2013-04-10 22:49 ` [ 24/29] thermal: return an error on failure to register thermal class Greg Kroah-Hartman
2013-04-10 22:49 ` [ 25/29] panic: fix a possible deadlock in panic() Greg Kroah-Hartman
2013-04-10 22:49 ` [ 26/29] mm: prevent mmap_cache race in find_vma() Greg Kroah-Hartman
2013-04-10 22:49 ` [ 27/29] Revert "mwifiex: cancel cmd timer and free curr_cmd in shutdown process Greg Kroah-Hartman
2013-04-10 22:49 ` [ 28/29] can: gw: use kmem_cache_free() instead of kfree() Greg Kroah-Hartman
2013-04-10 22:49 ` [ 29/29] rt2x00: rt2x00pci_regbusy_read() - only print register access failure once Greg Kroah-Hartman
2013-04-11 16:29 ` [ 00/29] 3.4.40-stable review Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130410224806.455886355@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=hpa@linux.intel.com \
--cc=jbeulich@suse.com \
--cc=linux-kernel@vger.kernel.org \
--cc=matt.fleming@intel.com \
--cc=mjg@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).