From: Borislav Petkov <bp@alien8.de>
To: Takashi Iwai <tiwai@suse.de>
Cc: paulmck@linux.vnet.ibm.com, x86-ml <x86@kernel.org>,
lkml <linux-kernel@vger.kernel.org>
Subject: Re: irq 16: nobody cared
Date: Mon, 22 Apr 2013 12:06:57 +0200 [thread overview]
Message-ID: <20130422100657.GF4637@pd.tnic> (raw)
In-Reply-To: <s5hzjwq53ec.wl%tiwai@suse.de>
On Mon, Apr 22, 2013 at 11:19:07AM +0200, Takashi Iwai wrote:
> Is the PCI device a HD-audio controller for the built-in analog or
> a HDMI audio controller coupled with a graphics chip?
Hmm:
[ 7.204020] snd_hda_intel 0000:01:00.1: irq 90 for MSI/MSI-X
[ 7.551912] #0: HDA ATI SB at 0xfeb00000 irq 16
[ 7.551965] #1: HDA ATI HDMI at 0xfea30000 irq 90
[ 70.870377] snd_hda_intel 0000:01:00.1: irq 90 for MSI/MSI-X
# lspci -s 01:00.1 -vvv
01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI RV635 HDMI Audio [Radeon HD 3600 Series]
Subsystem: ASUSTeK Computer Inc. Device aa20
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 90
Region 0: Memory at fea30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000feeff00c Data: 4164
Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Kernel driver in use: snd_hda_intel
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
next prev parent reply other threads:[~2013-04-22 10:07 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-20 18:53 irq 16: nobody cared Borislav Petkov
2013-04-20 23:52 ` Paul E. McKenney
2013-04-21 10:34 ` Borislav Petkov
2013-04-21 16:30 ` Paul E. McKenney
2013-04-21 16:56 ` Borislav Petkov
2013-04-21 18:10 ` Borislav Petkov
2013-04-21 18:56 ` Paul E. McKenney
2013-04-21 19:06 ` Borislav Petkov
2013-04-21 20:34 ` Paul E. McKenney
2013-04-21 20:51 ` Borislav Petkov
2013-04-21 21:42 ` Borislav Petkov
2013-04-21 22:00 ` Paul E. McKenney
2013-04-21 22:12 ` Borislav Petkov
2013-04-22 8:01 ` Ingo Molnar
2013-04-22 9:18 ` Borislav Petkov
2013-04-22 13:16 ` Paul E. McKenney
2013-04-21 18:47 ` Paul E. McKenney
2013-04-22 8:32 ` Takashi Iwai
2013-04-22 9:13 ` Borislav Petkov
2013-04-22 9:19 ` Takashi Iwai
2013-04-22 10:06 ` Borislav Petkov [this message]
2013-04-22 11:33 ` Takashi Iwai
2013-04-22 13:56 ` Borislav Petkov
2013-04-22 12:56 ` Thomas Gleixner
2013-04-22 14:23 ` Borislav Petkov
2013-04-22 14:44 ` Paul E. McKenney
2013-04-22 21:33 ` Borislav Petkov
2013-04-22 22:07 ` Paul E. McKenney
2013-04-23 14:10 ` Thomas Gleixner
2013-04-23 14:34 ` Borislav Petkov
2013-04-23 15:01 ` Paul E. McKenney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130422100657.GF4637@pd.tnic \
--to=bp@alien8.de \
--cc=linux-kernel@vger.kernel.org \
--cc=paulmck@linux.vnet.ibm.com \
--cc=tiwai@suse.de \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox