From: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
To: John Stultz <john.stultz@linaro.org>
Cc: Alexander Holler <holler@ahsoftware.de>,
Kay Sievers <kay@vrfy.org>, LKML <linux-kernel@vger.kernel.org>,
Feng Tang <feng.tang@intel.com>
Subject: Re: CONFIG_RTC_HCTOSYS lost on x86 with ALWAYS_USE_PERSISTENT_CLOCK changes?
Date: Thu, 25 Apr 2013 15:02:31 -0600 [thread overview]
Message-ID: <20130425210231.GE31863@obsidianresearch.com> (raw)
In-Reply-To: <51798BF4.5020602@linaro.org>
On Thu, Apr 25, 2013 at 01:03:00PM -0700, John Stultz wrote:
> On 04/25/2013 11:33 AM, Jason Gunthorpe wrote:
> >John mentioned they might be kept for embedded - eg size reduction.
> >The issue with that idea is if you do not enable the class RTC
> >subsystem then there is no way for a small embedded userspace to set
> >the RTC. The /dev/rtc* device obviously goes away, but it also turns
> >out that that CONFIG_GENERIC_CMOS_UPDATE only works when combined with
> >a heavy weight userspace NTPD that runs the kernel PLL properly. The
> >kernel NTP code is enormously conservative and it is actually quite
> >hard to get it to write to the RTC. An RTC that cannot be set is
> >useless, so these days I feel CONFIG_RTC is pragmatically mandatory -
> >and my space constrained embedded systems do set it, for these
> >reasons.
>
> So I mentioned that the size-reduciton focused folks might not like
> the generic rtc core over the persistent_clock code, but I'm not
> convinced that's a reason to keep the persistent clock code (which
What I mean is you can't actually choose to use persistent_clock over
rtc core, that is not a choice. The only choice these days it to omit
the user space interface to the RTC (eg rtc core). On some platforms
the RTC will still get *read* during boot via persisent_clock, but no
platform has a way for userspace to *set* via
persisent_clock. update_persisent_clock is not connected to userspace
anymore.
An unsettable RTC is useless, IMHO.
> I only noted it, because it has come up prior as a complaint when
> switching to the RTC core was proposed.
Sure, but, AFAIK, that was a general concern of /dev/rtc vs /dev/rtc0
- however since then we have lost /dev/rtc completely. That means
there is no longer any way to access the persistent_clock functions
from userspace.
Jason
prev parent reply other threads:[~2013-04-25 21:02 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-04-24 1:34 CONFIG_RTC_HCTOSYS lost on x86 with ALWAYS_USE_PERSISTENT_CLOCK changes? Kay Sievers
2013-04-24 2:43 ` John Stultz
2013-04-24 3:05 ` Kay Sievers
2013-04-24 3:19 ` John Stultz
2013-04-24 3:33 ` Kay Sievers
2013-04-24 3:51 ` Kay Sievers
2013-04-24 16:33 ` John Stultz
2013-04-24 16:30 ` John Stultz
2013-04-24 16:51 ` Kay Sievers
2013-04-24 5:12 ` Alexander Holler
2013-04-24 16:07 ` John Stultz
2013-04-24 16:32 ` Kay Sievers
2013-04-24 16:42 ` John Stultz
2013-04-25 7:11 ` Alexander Holler
2013-04-25 16:01 ` Kay Sievers
2013-04-25 16:13 ` John Stultz
2013-04-25 18:33 ` Jason Gunthorpe
2013-04-25 19:45 ` Kay Sievers
2013-04-25 19:54 ` John Stultz
2013-04-25 20:35 ` Jason Gunthorpe
2013-04-25 20:03 ` John Stultz
2013-04-25 21:02 ` Jason Gunthorpe [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130425210231.GE31863@obsidianresearch.com \
--to=jgunthorpe@obsidianresearch.com \
--cc=feng.tang@intel.com \
--cc=holler@ahsoftware.de \
--cc=john.stultz@linaro.org \
--cc=kay@vrfy.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox