* [GIT PATCH] USB patches for 3.10-rc1
@ 2013-04-29 16:23 Greg KH
2013-04-29 19:41 ` Linus Torvalds
0 siblings, 1 reply; 9+ messages in thread
From: Greg KH @ 2013-04-29 16:23 UTC (permalink / raw)
To: Linus Torvalds, Andrew Morton; +Cc: linux-kernel, linux-usb
The following changes since commit 31880c37c11e28cb81c70757e38392b42e695dc6:
Linux 3.9-rc6 (2013-04-07 20:49:54 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-3.10-rc1
for you to fetch changes up to 4626b8daf9bb00ce6b4d533c1a155211ad880f32:
USB: ehci-msm: USB_MSM_OTG needs USB_PHY (2013-04-25 11:00:25 -0700)
----------------------------------------------------------------
USB patches for 3.10-rc1
Here's the big USB pull request for 3.10-rc1.
Lots of USB patches here, the majority being USB gadget changes and
USB-serial driver cleanups, the rest being ARM build fixes / cleanups,
and individual driver updates. We also finally got some chipidea fixes,
which have been delayed for a number of kernel releases, as the
maintainer has now reappeared.
All of these have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Adrian Thomasset (2):
USB: ftdi_sio: correct ST Micro Connect Lite PIDs
USB: ftdi_sio: enable two UART ports on ST Microconnect Lite
Alan Stern (18):
USB: EHCI: split ehci-omap out to a separate driver
USB: EHCI: decrease schedule-status poll timeout
USB: EHCI: improve use of per-port status-change bits
USB: EHCI: reorganize ehci_iaa_watchdog()
USB: EHCI: don't turn on PORT_SUSPEND during port resume
USB: EHCI: fix up incorrect merge resolution
USB: EHCI: changes related to qh_refresh()
USB: EHCI: change return value of qh_completions()
USB: EHCI: split needs_rescan into two flags
USB: EHCI: consolidate code in ehci_urb_dequeue()
USB: EHCI: convert singly-linked lists to list_heads
USB: EHCI: improve end_unlink_async()
USB: EHCI: remove unused variable in unlink_empty_async()
USB: avoid error messages when a device is disconnected
USB: use "global suspend" for system sleep on USB-2 buses
USB: remove CONFIG_USB_SUSPEND option
USB: remove CONFIG_USB_SUSPEND from Documentation
USB: improve port transitions when EHCI starts up
Alexander Shishkin (8):
usb: chipidea: drop redundant includes
usb: chipidea: trim include list in udc code
usb: chipidea: trim include list in the core
usb: chipidea: remove home-grown tracing facility
usb: chipidea: convert debug entries in sysfs to debugfs
usb: chipidea: move role to debugfs
usb: chipidea: move debug files creation/removal to the core
usb: chipidea: make pci platform datas static
Andi Kleen (1):
USB: Fix initconst in ehci driver
Andrzej Pietrasiewicz (11):
usb: gadget: use consistent naming scheme for usb function modules
usb: gadget: nokia: remove unused include
usb: gadget: f_serial: convert to new function interface with backward compatibility
usb: gadget: serial: convert to new interface of f_serial
usb: gadget: f_serial: remove compatibility layer
usb: gadget: f_serial: add configfs support
usb: gadget: f_obex: convert to new function interface with backward compatibility
usb: gadget: serial: convert to new interface of f_obex
usb: gadget: f_obex: add configfs support
usb: gadget: f_sourcesink.c: correct a copy-paste misnomer
usb: gadget: zero: put function instances on unbind
Arnd Bergmann (9):
USB: EHCI: DT support for generic bus glue
usb: ehci: mark unlink_empty_async_suspended() as __maybe_unused
usb: exynos: do not include plat/usb-phy.h
usb: phy: phy core cannot yet be a module
usb: phy: tegra: don't call into tegra-ehci directly
USB: lpc32xx: ISP1301 needs USB_PHY
USB: OMAP: ISP1301 needs USB_PHY
USB: OHCI: avoid conflicting platform drivers
USB: ehci-msm: USB_MSM_OTG needs USB_PHY
Ben Jencks (1):
usb/misc/appledisplay: Add 24" LED Cinema display
Bhupesh Sharma (6):
usb: gadget: uvc: Add fix for UVC compliance test suite assertion 6.3.90 failure
usb: gadget: uvc: Add fix for UVC compliance test suite's assertion 6.1.25 failure
usb: gadget: uvc: Delay the status stage when setting alternate setting 1
usb: gadget: uvc: Make video streaming buffer size comply with USB3.0 SS
usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework
usb: gadget/uvc: Add support for 'get_unmapped_area' for MMUless architectures
Bill Pemberton (1):
Revert "USB: quatech2: only write to the tty if the port is open."
Bjørn Mork (2):
USB: cdc-wdm: implement IOCTL_WDM_MAX_COMMAND
USB: option: add a D-Link DWM-156 variant
Chao Xie (6):
usb: gadget: mv_udc_core: remove unused clock
usb: otg: mv_otg: remove unused clock
usb: ehci: mv_ehci: remove unused clock
arm: mmp: remove clock from usb pdata for aspenite
arm: mmp: remove clock name from usb pdata for ttc
usb: mv_usb: remove clock name from pdata
Chen Gang (3):
usb: gadget: s3c-hsudc: delete outdated comment
usb: gadget: uvc: Use strlcpy instead of strncpy
USB: driver.c: processing failure, maching resume condition with suspend condition
Christian Engelmayer (1):
EHCI: Quirk flag for port power handling on overcurrent.
Colin Ian King (1):
usb: misc: sisusbvga: Avoid NULL pointer dereference from sisusb
Cyril Roelandt (1):
usb: gadget: uvc: Use GFP_ATOMIC under spin lock
Dan Carpenter (5):
usb: storage: onetouch: tighten a range check
usb: gadget: uvc: use capped length value
usb: chipidea: fix precedence bug in ci_requests_show()
USB: keyspan: pull in one indent level
USB: keyspan: add a sanity test on "len"
David Howells (2):
xhci: Use ilog2() rather than __ffs() for calculating SEGMENT_SHIFT
xhci: Rename SEGMENT_SIZE and SEGMENT_SHIFT as the former is used in a.out.h
David Linares (1):
USB: hub: Avoid NULL pointer dereference when hub doesn't have any ports
David Rientjes (1):
usb, gadget: use appropriate warning accessors
Denis Efremov (1):
usb: phy: remove exported function from __init section
Dmitry Torokhov (1):
USB: remove incorrect __exit markups
Doug Anderson (1):
usb: ehci-s5p: Use devm for requesting ehci_vbus_gpio
Du Xing (1):
USB: usb-skeleton.c: fix blocked forever in skel_read
Fabio Baltieri (14):
usb: musb: drop dangling CONFIG_USB_MUSB_DEBUG
usb: musb: ux500: implement musb_set_vbus
usb: musb: ux500: add otg notifier support
usb: otg: ab8500-usb: drop support for ab8500 pre v2.0
usb: phy: ab8500-usb: update irq handling code
usb: musb: ux500_dma: drop references to U5500
usb: phy: ab8500-usb: convert to devm_kzalloc
usb: phy: ab8500-usb: add regulator support
usb: phy: ab8500-usb: split ab8500_usb_phy_ctrl
usb: phy: ab8500-usb: enable/disable regulator on phy events
usb: phy: ab8500-usb: fix last notifier arguments
usb: phy: ab8500-usb: check regulator_enable return value
usb: phy: twl4030-usb: check regulator_enable return value
usb: phy: twl6030-usb: check regulator_enable return value
Fabio Estevam (3):
usb: chipidea: usbmisc_imx6q: Staticize usbmisc_imx6q_drv_init/exit()
usb: host: ehci-mxc: Remove unneeded header file
usb: host: ehci-mxc: Remove dev_info on probe
Felipe Balbi (200):
usb: gadget: udc-core: allow udc class register gadget device
usb: dwc3: gadget: let udc-core manage gadget->dev
usb: musb: gadget: let udc-core manage gadget-dev
usb: gadget: omap_udc: let udc-core manage gadget->dev
usb: gadget: amd5536udc: let udc-core manage gadget->dev
usb: gadget: at91_udc: let udc-core manage gadget->dev
usb: gadget: atmel_usba_udc: let udc-core manage gadget->dev
usb: gadget: bcm63xx_udc: let udc-core manage gadget->dev
usb: gadget: dummy_hcd: let udc-core manage gadget->dev
usb: gadget: fsl_qe_udc: let udc-core manage gadget->dev
usb: gadget: fsl_udc_core: let udc-core manage gadget->dev
usb: gadget: fusb300_udc: let udc-core manage gadget->dev
usb: gadget: goku_udc: let udc-core manage gadget->dev
usb: gadget: imx_udc: let udc-core manage gadget->dev
usb: gadget: lpc32xx_udc: let udc-core manage gadget->dev
usb: gadget: m66592-udc: let udc-core manage gadget->dev
usb: gadget: mv_u3d_core: let udc-core manage gadget->dev
usb: gadget: mv_u3d_core: fix a compile warning
usb: gadget: mv_udc_core: let udc-core manage gadget->dev
usb: gadget: net2272: let udc-core manage gadget->dev
usb: gadget: net2280: let udc-core manage gadget->dev
usb: gadget: pch_udc: let udc-core manage gadget->dev
usb: gadget: r8a66597-udc: let udc-core manage gadget->dev
usb: gadget: s3c-hsotg: let udc-core manage gadget->dev
usb: gadget: s3c-hsudc: let udc-core manage gadget->dev
usb: gadget: s3c2410_udc: let udc-core manage gadget->dev
usb: renesas_usbhs: gadget: let udc-core manage gadget->dev
usb: gadget: pxa25x_udc: let udc-core manage gadget->dev
usb: gadget: pxa27x_udc: let udc-core manage gadget->dev
usb: chipidea: let udc-core manage gadget->dev
usb: gadget: drop now unnecessary flag
usb: gadget: s3c-hsotg: switch over to usb_gadget_map/unmap_request()
usb: gadget: amd5536udc: remove unused structure member
usb: gadget: atmel_usba_udc: switch over to usb_gadget_map/unmap_request()
usb: gadget: fsl_udc_core: switch over to usb_gadget_map/unmap_request()
usb: gadget: fusb300: switch over to usb_gadget_map/unmap_request()
usb: gadget: lpc32xx_udc: switch over to usb_gadget_map/unmap_request()
usb: gadget: mv_udc_core: switch over to usb_gadget_map/unmap_request()
usb: dwc3: core: explicitly setup and cleanup event buffers
usb: dwc3: gadget: introduce and use enable/disable irq methods
usb: dwc3: gadget: save state of pullups
usb: dwc3: core: add power management support
usb: dwc3: omap: introduce enable/disable IRQ methods
usb: dwc3: omap: remove unused fields from private structure
usb: dwc3: omap: add basic suspend/resume support
usb: dwc3: pci: add basic suspend/resume support
usb: musb: core: remove unnecessary pr_info()
usb: musb: switch over to devm_ioremap_resource()
usb: musb: gadget: delete wrong comment
usb: musb: force PIO-only if we're building multiplatform kernels
usb: musb: make davinci and da8xx glues depend on BROKEN
usb: musb: dsps: add missing include
usb: musb: ux500_dma: kill compile warnings
usb: musb: dsps: fix possible compile warning
usb: musb: gadget: fix compile warning
usb: musb: Kconfig: drop unnecessary dependencies
usb: dwc3: core: remove bogus comment to our structure
usb: dwc3: add a flags field to event buffer
usb: dwc3: add count field to event buffer
usb: dwc3: gadget: move to threaded IRQ
usb: common: introduce usb_state_string()
usb: gadget: introduce gadget state tracking
usb: dwc3: gadget: implement gadget state tracking
usb: dwc3: remove our homebrew state mechanism
usb: dwc3: debugfs: add two missing Link States
usb: dwc3: debugfs: when unknown, print only the state value
usb: dwc3: debugfs: mark our regset structure const
usb: dwc3: debugfs: improve debugfs file creation
usb: dwc3: core: avoid checkpatch.pl warning
usb: gadget: pxa27x_udc: drop ARCH_PXA dependency
usb: gadget: pxa27x_udc: switch over to module_platform_driver
usb: gadget: udc-core: copy dma-related parameters from parent
usb: gadget: udc-core: initialize parent
usb: gadget: chipidea: remove unnecessary initializations
usb: gadget: amd5536udc: remove unnecessary initializations
usb: gadget: atmel_usba_udc: remove unnecessary initializations
usb: gadget: bcm63xx_udc: remove unnecessary initializations
usb: gadget: fusb300_udc: remove unnecessary initializations
usb: gadget: goku_udc: remove unnecessary initializations
usb: gadget: goku_udc: remove unused macro
usb: gadget: imx_udc: remove unnecessary initializations
usb: gadget: m66592-udc: remove unnecessary initializations
usb: dwc3: gadget: remove unnecessary initializations
usb: gadget: mv_u3d_core: remove unnecessary initializations
usb: gadget: mv_udc_core: remove unnecessary initializations
usb: gadget: net2272: remove unnecessary initializations
usb: gadget: net2280: remove unnecessary initializations
usb: gadget: omap_udc: remove unnecessary initializations
usb: gadget: pch_udc: remove unnecessary initializations
usb: gadget: pxa25x_udc: remove unnecessary initializations
usb: gadget: pxa27x_udc: remove unnecessary initializations
usb: gadget: r8a66597-udc: remove unnecessary initializations
usb: gadget: s3c-hsotg: remove unnecessary initializations
usb: gadget: s3c-hsudc: remove unnecessary initializations
usb: gadget: s3c2410_udc: remove unnecessary initializations
usb: musb: gadget: remove unnecessary initializations
usb: gadget: fsl_udc_core: remove unnecessary initializations
usb: gadget: udc-core: initialize gadget->dev.driver
usb: dwc3: gadget: don't touch gadget.dev.driver
usb: gadget: amd5536udc: don't touch gadget.dev.driver
usb: gadget: at91_udc: don't touch gadget.dev.driver
usb: gadget: atmel_usba_udc: don't touch gadget.dev.driver
usb: gadget: bcm63xx_udc: don't touch gadget.dev.driver
usb: gadget: dummy_hcd: don't touch gadget.dev.driver
usb: gadget: fsl_qe_udc: don't touch gadget.dev.driver
usb: gadget: fsl_udc_core: don't touch gadget.dev.driver
usb: gadget: fusb300_udc: don't touch gadget.dev.driver
usb: gadget: goku_udc: don't touch gadget.dev.driver
usb: gadget: imx_udc: don't touch gadget.dev.driver
usb: gadget: lpc32xx_udc: don't touch gadget.dev.driver
usb: gadget: m66592-udc: don't touch gadget.dev.driver
usb: gadget: mv_u3d_core: don't touch gadget.dev.driver
usb: gadget: mv_udc_core: don't touch gadget.dev.driver
usb: gadget: net2272: don't touch gadget.dev.driver
usb: gadget: net2280: don't touch gadget.dev.driver
usb: gadget: omap_udc: don't touch gadget.dev.driver
usb: gadget: pch_udc: don't touch gadget.dev.driver
usb: gadget: pxa25x_udc: don't touch gadget.dev.driver
usb: gadget: pxa27x_udc: don't touch gadget.dev.driver
usb: gadget: s3c-hsotg: don't touch gadget.dev.driver
usb: gadget: s3c-hsudc: don't touch gadget.dev.driver
usb: gadget: s3c2410_udc: don't touch gadget.dev.driver
usb: renesas: gadget: don't touch gadget.dev.driver
usb: gadget: udc-core: introduce usb_add_gadget_udc_release()
usb: chipidea: udc: don't assign gadget.dev.release directly
usb: dwc3: gadget: don't assign gadget.dev.release directly
usb: gadget: amd5536udc: don't assign gadget.dev.release directly
usb: gadget: bcm63xx_udc: don't assign gadget.dev.release directly
usb: gadget: dummy_hcd: don't assign gadget.dev.release directly
usb: gadget: fsl_qe_udc: don't assign gadget.dev.release directly
usb: gadget: fsl_udc_core: don't assign gadget.dev.release directly
usb: gadget: fusb300_udc: don't assign gadget.dev.release directly
usb: gadget: goku_udc: don't assign gadget.dev.release directly
usb: gadget: m66592-udc: don't assign gadget.dev.release directly
usb: gadget: mv_u3d_core: don't assign gadget.dev.release directly
usb: gadget: mv_udc_core: don't assign gadget.dev.release directly
usb: gadget: net2272: don't assign gadget.dev.release directly
usb: gadget: net2280: don't assign gadget.dev.release directly
usb: gadget: omap_udc: don't assign gadget.dev.release directly
usb: gadget: pch_udc: don't assign gadget.dev.release directly
usb: gadget: r8a66597-udc: don't assign gadget.dev.release directly
usb: gadget: s3c-hsotg: don't assign gadget.dev.release directly
usb: musb: gadget: don't assign gadget.dev.release directly
usb: renesas: gadget: don't assign gadget.dev.release directly
usb: gadget: udc-core: remove protection when setting gadget.dev.release
usb: gadget: udc-core: anywone can read 'speed' attributes
usb: dwc3: core: define more revisions
usb: dwc3: workaround: unexpected transtion U3 -> RESUME
usb: dwc3: calculate the number of endpoints
usb: dwc3: gadget: use num_(in|out)_eps from HW params
usb: otg: prefix otg_state_string with usb_
usb: otg: move usb_otg_state_string to usb-common.c
usb: phy: convert EXPORT_SYMBOL to EXPORT_SYMBOL_GPL
usb: phy: move all PHY drivers to drivers/usb/phy/
usb: phy: make it a menuconfig
usb: power: pda_power: check against CONFIG_USB_PHY
usb: gadget: mv_udc_core: check against CONFIG_USB_PHY
usb: ehci: marvel: check against CONFIG_USB_PHY
usb: ehci: tegra: check against CONFIG_USB_PHY
usb: phy: remove CONFIG_USB_OTG_UTILS
usb: phy: rename all phy drivers to phy-$name-usb.c
usb: phy: isp1301: give it a context structure
usb: phy: introduce ->set_vbus() method
usb: phy: isp1301: implement PHY API
usb: gadget: atmel: remove unused DMA_ADDR_INVALID
usb: gadget: net2272: remove unused DMA_ADDR_INVALID
usb: gadget: net2280: remove unused DMA_ADDR_INVALID
usb: gadget: uvc: remove references to DMA_ADDR_INVALID
usb: renesas: remove unused DMA_ADDR_INVALID
usb: dwc3: omap: fix sparse warning
usb: phy: return -ENXIO when PHY layer isn't enabled
usb: dwc3: fix PHY error handling
usb: gadget: mv_udc_core: fix PHY error handling
usb: gadget: s3c-hsotg: fix PHY error handling
usb: musb: omap2430: fix PHY error handling
usb: host: ehci-msm: fix PHY error handling
usb: host: ehci-mv: fix PHY error handling
usb: host: ehci-s5p: fix PHY error handling
usb: host: ohci-exynos: fix PHY error handling
usb: phy: samsung: fix sparse warning
usb: phy: gpio-vbus: don't ignore regulator APIs return value
arm: tegra: fix Kconfig select clauses
usb: host: ehci-tegra: fix PHY error handling
usb: gadget: mv_u3d: remove unused headers
usb: gadget: mv_u3d: remove outdated selects
usb: gadget: mv_u3d: fix sparse warnings
usb: gadget: mv_u3d: drop ARCH dependency
usb: gadget: net2272: fix sparse warnings
usb: gadget: net2280: fix sparse warnings
usb: gadget: dummy: fix sparse warning
usb: gadget: pch_udc: fix sparse warnings
usb: gadget: mv_udc_core: fix sparse warnings
usb: gadget: mv_u3d: fix sparse warnings
usb: musb: ux500_dma: fix sparse warning
usb: chipidea: core: switch over to devm_ioremap_resource
usb: chipidea: don't redefine __ffs()
usb: gadget: mv_u3d_core: remove unused clock
usb: gadget: udc-core: prevent a memory leak
usb: gadget: pxa27x_udc: fix Section Mismatches
usb: gadget: nokia: include f_ecm.c
Filippo Turato (1):
USB: serial: option: Added support Olivetti Olicard 145
Florian Fainelli (5):
USB: regroup all depends on USB within an if USB block
USB: remove USB_EHCI_BIG_ENDIAN_{DESC,MMIO} depends on architecture symbol
USB: enclose EHCI HCD drivers within an if USB_EHCI_HCD block
USB: enclose all depends on USB_OHCI_HCD within an if USB_OHCI_HCD block
USB: enclose USB_XHCI_HCD related symbols within a if USB_XHCI_HCD block
Geoff Levand (1):
usb: PS3 EHCI remove unneeded ehci_shutdown
George Cherian (1):
usb: dwc3: core: fix wrong OTG event regitser offset
Grazvydas Ignotas (10):
usb: phy: twl4030-usb: don't enable PHY during init
usb: phy: twl4030-usb: ignore duplicate events
usb: phy: twl4030-usb: don't switch the phy on/off needlessly
usb: phy: twl4030-usb: poll for ID disconnect
usb: musb: core: honour initial transceiver state
usb: musb: gadget: clear gadget_driver when gadget is stopped
usb: musb: core: log VBUS error
usb: phy: twl4030-usb: check if vbus is driven by twl itself
usb: musb: omap2430: turn off vbus on cable disconnect
usb: musb: gadget: use platform callback to enable vbus
Greg Kroah-Hartman (12):
Staging: ccg: remove it from the build
Merge branch 'usb-linus' into usb-next
Merge 3.9-rc4 into usb-next
Merge branch 'usb-linus' into usb-next
Revert "USB: serial: fix hang when opening port"
Merge v3.9-rc5 into usb-next
Merge tag 'usb-for-v3.10' of git://git.kernel.org/.../balbi/usb into usb-next
Merge 3.9-rc6 into usb-next
Merge tag 'for-usb-next-2012-04-08' of git://git.kernel.org/.../sarah/xhci into usb-next
USB: serial: wishbone-serial: fix up minor sparse warning
USB: storage: convert to use module_usb_driver()
Merge tag 'usb-for-v3.10-part2' of git://git.kernel.org/.../balbi/usb into usb-next
Hans de Goede (1):
usbfs: Always allow ctrl requests with USB_RECIP_ENDPOINT on the ctrl ep
Huang Rui (1):
USB: fix an incorrect table index in comment
Jingoo Han (3):
usb: gadget: mv_u3d: make mv_u3d_pm_ops static
USB: ehci-spear: add CONFIG_PM_SLEEP to suspend/resume functions
usb: dwc3: add CONFIG_PM_SLEEP to suspend/resume functions
Jiri Slaby (1):
USB: io_ti, stop dereferencing potential NULL
Joe Perches (3):
usb: storage: Add usb_stor_dbg, reduce object size
usb: storage: Fix link error
usb: storage: Convert US_DEBUGP to usb_stor_dbg
Johan Hovold (113):
USB: ftdi_sio: remove obsolete port data refcounting
USB: kl5kusb105: remove unnecessary urb kill on close
USB: iuu_phoenix: remove unnecessary urb kill on close
USB: pl2303: use interface device for debug
USB: pl2303: make set_control_lines a port operation
USB: serial: rename tty-port callbacks
USB: serial: remove redundant comments
USB: serial: clean up debug info
USB: serial: remove redundant allocation error messages
USB: serial: remove port number from generic-driver debug
USB: ark3116: remove bogus disconnect test in close
USB: cyberjack: remove bogus disconnect test in close
USB: digi_acceleport: remove bogus disconnect test in close
USB: iuu_phoenix: remove bogus disconnect test in close
USB: keyspan: remove bogus disconnect test in close
USB: keyspan_pda: remove bogus disconnect test from dtr_rts
USB: keyspan_pda: remove bogus disconnect test in close
USB: mos7840: remove bogus disconnect test in close
USB: sierra: remove bogus disconnect test in close
USB: usb_wwan: remove bogus disconnect test in close
USB: serial: remove bogus disconnect test in cleanup
USB: ssu100: remove explicit initialisation of disconnect
USB: ssu100: remove custom close operation
USB: serial: fix generic disconnect implementation
USB: serial: remove generic disconnect callback
USB: serial: remove generic release callback
USB: serial: clean up generic-operation handling
USB: cyberjack: fix disconnect handling
USB: serial: fix port release
USB: serial: rename port release
USB: fix urb-poison imbalance
USB: serial: use urb poison to reliably kill traffic
USB: serial: clean up usb-serial bus device removal
USB: serial: add tiocmiwait subdriver operation
USB: serial: add generic TIOCMIWAIT implementation
USB: serial: wake up MSR-wait queue on disconnect
USB: serial: add generic get_icount implementation
USB: ftdi_sio: use port icount
USB: ftdi_sio: switch to generic TIOCMIWAIT implementation
USB: ftdi_sio: switch to generic get_icount implementation
USB: ark3116: switch to generic get_icount implementation
USB: ark3116: switch to generic TIOCMIWAIT implementation
USB: ch341: replace custom ioctl operation with tiocmiwait
USB: ch341: fix TIOCMIWAIT and disconnect
USB: cypress_m8: replace custom ioctl operation with tiocmiwait
USB: cypress_m8: fix TIOCMIWAIT and disconnect
USB: digi_acceleport: remove unused MSR-wait queue
USB: f81232: add custom tiocmiwait operation
USB: f81232: fix TIOCMIWAIT and disconnect
USB: io_edgeport: switch to generic get_icount implementation
USB: io_edgeport: switch to generic TIOCMIWAIT implementation
USB: io_ti: switch to generic get_icount implementation
USB: io_ti: switch to generic TIOCMIWAIT implementation
USB: iuu_phoenix: remove unused MSR-wait queue
USB: mct_u232: switch to generic get_icount implementation
USB: mct_u232: switch to generic TIOCMIWAIT implementation
USB: mos7720: remove broken get_icount and TIOCMIWAIT
USB: mos7840: remove smp barriers from icount handling
USB: mos7840: switch to generic get_icount implementation
USB: mos7840: switch to generic TIOCMIWAIT implementation
USB: oti6858: replace custom ioctl operation with tiocmiwait
USB: oti6858: fix TIOCMIWAIT and disconnect
USB: pl2303: add custom tiocmiwait operation
USB: pl2303: fix TIOCMIWAIT and disconnect
USB: quatech2: switch to generic get_icount implementation
USB: quatech2: switch to generic TIOCMIWAIT implementation
USB: spcp8x5: remove broken TIOCMIWAIT support
USB: spcp8x5: remove broken uart-error handling
USB: spcp8x5: clean up code
USB: spcp8x5: pass usb-serial port to control functions
USB: spcp8x5: clean up modem status retrieval
USB: spcp8x5: reimplement device type detection
USB: spcp8x5: add proper modem-status support
USB: ssu100: switch to generic get_icount implementation
USB: ssu100: switch to generic TIOCMIWAIT implementation
USB: ti_usb_3410_5052: switch to generic get_icount implementation
USB: ti_usb_3410_5052: switch to generic TIOCMIWAIT implementation
USB: serial: remove unused MSR-wait queue
USB: cp210x: always disable uart on close
USB: cypress_m8: remove bogus disconnect test from close
USB: io_ti: always disable uart on close
USB: kl5kusb105: always disable uart on close
USB: metro-usb: always disable uart on close
USB: mos7720: always disable uart on close
USB: opticon: fix return value of tiocmset
USB: opticon: remove disconnect test from tiocmset
USB: pl2303: fix return value of tiocmset
USB: pl2303: remove disconnect test from tiocmset
USB: quatech2: always disable uart on close
USB: visor: always disable uart on close
USB: garmin_gps: remove bogus disconnect test in close
USB: garmin_gps: remove bogus disconnect test in bulk callback
USB: iuu_phoenix: remove bogus disconnect test in close
USB: serial: update copyright information
USB: omninet: use kzalloc for private data
USB: omninet: clean up protocol description
USB: omninet: clean up protocol defines
USB: omninet: refactor read-urb processing
USB: omninet: switch to generic read implementation
USB: kobil_sct: fix broken debug code
USB: kobil_sct: remove unused endpoint address
USB: kobil_sct: use port interrupt-out urb
USB: mct_u232: clean up read implementation
USB: symbolserial: use port interrupt-in urb
USB: symbolserial: remove unused private data
USB: symbolserial: move private-data allocation to port_probe
USB: io_ti: fix TIOCGSERIAL
USB: io_ti: remove redundant wait_until_sent
USB: ti_usb_3410_5052: move write-fifo flushing to close
USB: ti_usb_3410_5052: remove lsr from port data
USB: ti_usb_3410_5052: query hardware-buffer status in chars_in_buffer
USB: ti_usb_3410_5052: remove redundant drain from break_ctl
USB: ti_usb_3410_5052: kill custom closing_wait
Julius Werner (1):
usb: Make USB persist default configurable
Kishon Vijay Abraham I (10):
usb: dwc3: omap: minor fixes to get dt working
usb: dwc3: omap: remove platform data associated with dwc3-omap
usb: dwc3: omap: stop using nop-usb-xceiv
usb: dwc3: set dma_mask for dwc3_omap device
usb: dwc3: dwc3-omap: return -EPROBE_DEFER if probe has not yet executed
usb: musb: omap2430: replace *_* with *-* in property names
usb: musb: omap: remove the check before calling otg_set_vbus
usb: musb: omap: add usb_phy_init in omap2430_musb_init
usb: phy: twl4030: use devres API for regulator get and request irq
usb: phy: twl4030: fix cold plug on OMAP3
Kuninori Morimoto (1):
usb: renesas_usbhs: fixup sparse errors for common.c
Laurent Pinchart (6):
usb: gadget: uvc: clarify comment about string descriptors
usb: gadget: uvc: Rename STATUS_BYTECOUNT to UVC_STATUS_MAX_PACKET_SIZE
usb: gadget: uvc: Fix coding style issues introduced by SS support
usb: gadget: uvc: Merge the SS/HS/FS control endpoint descriptors
usb: gadget: uvc: Merge the streaming maxpacket and mult parameters
usb: gadget: uvc: Configure the streaming endpoint based on the speed
Manjunath Goudar (5):
USB: EHCI: make ehci-orion a separate driver
USB: EHCI: make ehci-spear a separate driver
USB: EHCI: make ehci-s5p a separate driver
USB: EHCI: make ehci-atmel a separate driver
USB: EHCI: make ehci-msm a separate driver
Marc Kleine-Budde (4):
usb: phy: mxs: use readl(), writel() instead of the _relaxed() versions
usb: chipidea: usbmisc: unset global varibale usbmisc on driver remove
usb: chipidea: usbmisc: fix a potential race condition
usb: chipidea: usbmisc: prepare driver to handle more than one soc
Mian Yousaf Kaukab (1):
usb: phy: ab8500-usb: fix unbalanced clock and regulator disable warnings
Michael Grzeschik (12):
usb: chipidea: usbmisc: rename file, struct and functions to usbmisc_imx
usb: chipidea: usbmisc: add mx53 support
usb: chipidea: usbmisc: add post handling and errata fix for mx25
usb: chipidea: udc: only clear active and halted bits in qhead
usb: chipidea: udc: rework ep_enable cap setting
usb: chipidea: udc: move ZLT flag change to ep_enable
usb: chipidea: udc: read status of td only once in hardware_dequeue
usb: chipidea: udc: don't truncate requests to single tds
usb: chipidea: udc: move _ep_queue into an unlocked function
usb: chipidea: udc: add the define TD_PAGE_COUNT and fix all users
usb: chipidea: udc: fix memory access of shared memory on armv5 machines
usb: chipidea: udc: fix memory leak in _ep_nuke
Ming Lei (8):
USB: adds comment on suspend callback
USB: serial: comments on suspend failure
USBHID: don't recover device if suspend fails in system sleep
usbnet: cdc_mbim: comments on suspend failure
usbnet: qmi_wwan: comments on suspend failure
usbnet: smsc95xx: don't recover device if suspend fails in system sleep
usbnet: smsc75xx: don't recover device if suspend fails in system sleep
USB: usbtmc: remove unnecessary memory allocation
Nishanth Menon (1):
USB: fix trivial usb_device kernel-doc errors
Nobuhiro Iwamatsu (2):
usb: ehci-sh: Fix build error due to comma has been deleted
usb: echi-sh: Remove driver variable which is not used
Patrice Chotard (1):
usb: phy: ab8500-usb: adopt pinctrl support
Paul Vlase (1):
usb: Use resource_size function
Peter Chen (1):
Revert "USB: chipidea: add vbus detect for udc"
Peter Hurley (1):
usb/serial: Remove unnecessary check for console
Ravi Babu (2):
usb: musb: dsps: print babble message only when musb is active host
usb: musb: gadget: read ep0 fifo only if rxcount is non zero
Roger Quadros (22):
USB: ehci-omap: Use devm_ioremap_resource()
USB: ehci-omap: Use PHY APIs to get the PHY device and put it out of suspend
USB: ehci-omap: Remove PHY reset handling code
USB: ehci-omap: Remove PHY regulator handling code
USB: ehci-omap: Select NOP USB transceiver driver
USB: ehci-omap: Get platform resources by index rather than by name
USB: ohci-omap3: Get platform resources by index rather than by name
USB: ohci-omap3: Add device tree support and binding information
USB: ehci-omap: Add device tree support and binding information
USB: ehci-omap: Try to get PHY even if not in PHY mode
USB: ehci-omap: Fix detection in HSIC mode
USB: ehci-omap: Get rid of omap_ehci_init()
usb: phy: nop: Add some parameters to platform data
usb: phy: nop: use devm_kzalloc()
usb: phy: nop: Manage PHY clock
usb: phy: nop: Handle power supply regulator for the PHY
usb: phy: nop: Handle RESET for the PHY
usb: phy: nop: use new PHY API to register PHY
usb: phy: nop: Add device tree support and binding information
USB: phy: nop: Defer probe if device needs VCC/RESET
USB: ehci-omap: Don't select any PHY driver
USB: ehci-omap: Improve PHY error handling
Ruslan Bilovol (1):
usb: musb: implement (un)map_urb_for_dma hooks
Sachin Kamat (2):
usb: gadget: fsl_udc_core: Use module_platform_driver_probe macro
usb: phy: samsung: convert to devm_ioremap_resource()
Sakethram Bommisetti (4):
usb: phy: ab8500-usb: set phy tuning values
usb: phy: ab8500-usb: fix eye diagram for ab8500 v2.0
usb: phy: ab8500-usb: drop link status delayed work
usb: phy: ab8500-usb: call phy_dis_work only when necessary
Samuel Tardieu (1):
USB: cdc-acm: Remove obsolete predefined speeds array
Sascha Hauer (2):
usb: phy: move bulk of otg/otg.c to phy/phy.c
usb: phy: mxs-phy: register phy with framework
Sebastian Andrzej Siewior (4):
usb: gadget: nokia: use function framework for ACM
usb: gadget: move the global the_dev variable to their users
usb: gadget: push tty port allocation from gadget into f_acm
usb: gadget: the start of the configfs interface
Shawn Guo (2):
ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY
ARM: mxs_defconfig: add CONFIG_USB_PHY
Shengzhou Liu (1):
usb: remove redundant tdi_reset
Stefani Seibold (1):
USB: add ftdi_sio USB ID for GDM Boost V1.x
Svetoslav Neykov (1):
usb: chipidea: big-endian support
Syam Sidhardhan (2):
usb: serial: Remove redundant NULL check before kfree
usb: otg: fsl_otg: remove redundant NULL check before kfree
Thierry Reding (1):
usb: host: ehci-tegra: Fix oops in error cleanup
Thomas Abraham (1):
usb: ohci-exynos: skip phy setup for Exynos5440 based platforms
Tony Camuso (1):
xhci - clarify compliance mode debug messages
Tony Prisk (1):
usb: ehci: unlink_empty_async_suspended() only used with CONFIG_PM
Tormod Volden (1):
usb-storage: CY7C68300A chips do not support Cypress ATACB
Venu Byravarasu (1):
usb: host: tegra: Reset Tegra USB controller before init
Vikas Sajjan (1):
usb: dwc3: exynos: add basic suspend/resume support
Virupax Sadashivpetimath (1):
usb: musb: ux500_dma: add missing MEM resource check
Vivek Gautam (6):
usb: dwc3: set 'mode' based on selected Kconfig choices
usb: phy: samsung: Common out the generic stuff
usb: phy: samsung: Add PHY support for USB 3.0 controller
usb: dwc3: exynos: Use of_platform API to create dwc3 core pdev
usb: dwc3: exynos: use clk_prepare_enable and clk_disable_unprepare
usb: ehci-s5p: fix: Fix null pointer dereferencing
Wei Yongjun (5):
USB: misc: usb3503: use module_i2c_driver to simplify the code
usbatm: fix potential NULL pointer dereference
usb: gadget: f_obex: fix error return code in obex_bind()
usb: gadget: multi: fix error return code in rndis_do_config()
usb: gadget: cdc2: fix error return code in cdc_do_config()
Wesley W. Terpstra (1):
usb-serial: add support for USB Wishbone-serial adapters
Yuan-Hsin Chen (2):
usb: gadget: fusb300_udc: add FUSB300_EPSET0_STL_CLR for clearing EP0 stall
usb: gadget: fusb300_udc: bug fix of not doing idma reset for each time
Zhang Yanfei (1):
driver: usb: storage: remove cast for kmalloc return value
Documentation/ABI/testing/sysfs-bus-usb | 6 +-
.../devicetree/bindings/usb/ci13xxx-imx.txt | 2 +
.../devicetree/bindings/usb/ehci-omap.txt | 32 +
.../devicetree/bindings/usb/ohci-omap3.txt | 15 +
Documentation/devicetree/bindings/usb/omap-usb.txt | 40 +-
.../devicetree/bindings/usb/samsung-usbphy.txt | 76 +-
.../devicetree/bindings/usb/usb-nop-xceiv.txt | 34 +
Documentation/ioctl/ioctl-number.txt | 1 +
Documentation/usb/power-management.txt | 10 +-
arch/arm/Kconfig | 2 +
arch/arm/configs/imx_v6_v7_defconfig | 1 +
arch/arm/configs/lpc32xx_defconfig | 1 +
arch/arm/configs/mxs_defconfig | 1 +
arch/arm/configs/omap1_defconfig | 1 +
arch/arm/mach-exynos/setup-usb-phy.c | 8 +-
arch/arm/mach-mmp/aspenite.c | 6 -
arch/arm/mach-mmp/ttc_dkb.c | 6 -
arch/arm/mach-s3c64xx/setup-usb-phy.c | 4 +-
arch/arm/mach-s5pv210/setup-usb-phy.c | 4 +-
arch/arm/mach-shmobile/board-armadillo800eva.c | 8 +-
arch/arm/mach-shmobile/board-kzm9g.c | 8 +-
arch/arm/mach-shmobile/board-mackerel.c | 12 +-
arch/arm/mach-tegra/Kconfig | 8 +-
arch/arm/plat-samsung/include/plat/usb-phy.h | 5 +-
arch/mips/Kconfig | 3 +
arch/powerpc/platforms/44x/Kconfig | 2 +
arch/powerpc/platforms/512x/Kconfig | 2 +
arch/sh/boards/mach-ecovec24/setup.c | 4 +-
arch/sparc/Kconfig | 2 +
drivers/Makefile | 2 +-
drivers/hid/usbhid/hid-core.c | 14 +-
drivers/net/usb/cdc_mbim.c | 5 +
drivers/net/usb/qmi_wwan.c | 5 +
drivers/net/usb/smsc75xx.c | 6 +-
drivers/net/usb/smsc95xx.c | 6 +-
drivers/power/Kconfig | 2 +-
drivers/power/pda_power.c | 14 +-
drivers/staging/Kconfig | 2 -
drivers/staging/Makefile | 1 -
drivers/usb/Kconfig | 25 +-
drivers/usb/Makefile | 4 +-
drivers/usb/atm/Kconfig | 2 +-
drivers/usb/atm/usbatm.c | 6 +-
drivers/usb/chipidea/Makefile | 2 +-
drivers/usb/chipidea/ci.h | 19 +-
drivers/usb/chipidea/ci13xxx_imx.c | 12 +
drivers/usb/chipidea/ci13xxx_imx.h | 3 +
drivers/usb/chipidea/ci13xxx_pci.c | 6 +-
drivers/usb/chipidea/core.c | 66 +-
drivers/usb/chipidea/debug.c | 888 ++++-------------
drivers/usb/chipidea/debug.h | 34 +-
drivers/usb/chipidea/udc.c | 299 +++---
drivers/usb/chipidea/udc.h | 4 +-
drivers/usb/chipidea/usbmisc_imx.c | 261 +++++
drivers/usb/chipidea/usbmisc_imx6q.c | 162 ----
drivers/usb/class/Kconfig | 6 +-
drivers/usb/class/cdc-acm.c | 8 -
drivers/usb/class/cdc-wdm.c | 19 +
drivers/usb/class/usbtmc.c | 26 +-
drivers/usb/core/Kconfig | 36 +-
drivers/usb/core/devio.c | 2 +
drivers/usb/core/driver.c | 25 +-
drivers/usb/core/generic.c | 2 +-
drivers/usb/core/hcd-pci.c | 214 +++--
drivers/usb/core/hcd.c | 10 +-
drivers/usb/core/hub.c | 136 ++-
drivers/usb/core/port.c | 4 +-
drivers/usb/core/quirks.c | 16 +-
drivers/usb/core/sysfs.c | 4 +-
drivers/usb/core/urb.c | 5 +-
drivers/usb/core/usb.c | 4 +-
drivers/usb/core/usb.h | 2 +-
drivers/usb/dwc3/Kconfig | 1 -
drivers/usb/dwc3/core.c | 201 +++-
drivers/usb/dwc3/core.h | 72 +-
drivers/usb/dwc3/debugfs.c | 52 +-
drivers/usb/dwc3/dwc3-exynos.c | 98 +-
drivers/usb/dwc3/dwc3-omap.c | 245 +++--
drivers/usb/dwc3/dwc3-pci.c | 38 +
drivers/usb/dwc3/ep0.c | 33 +-
drivers/usb/dwc3/gadget.c | 321 +++++--
drivers/usb/gadget/Kconfig | 20 +-
drivers/usb/gadget/Makefile | 13 +-
drivers/usb/gadget/acm_ms.c | 15 +-
drivers/usb/gadget/amd5536udc.c | 16 +-
drivers/usb/gadget/amd5536udc.h | 1 -
drivers/usb/gadget/at91_udc.c | 14 +-
drivers/usb/gadget/atmel_usba_udc.c | 44 +-
drivers/usb/gadget/atmel_usba_udc.h | 6 -
drivers/usb/gadget/bcm63xx_udc.c | 23 -
drivers/usb/gadget/cdc2.c | 31 +-
drivers/usb/gadget/composite.c | 1 +
drivers/usb/gadget/configfs.c | 1003 ++++++++++++++++++++
drivers/usb/gadget/dummy_hcd.c | 19 +-
drivers/usb/gadget/ether.c | 20 +-
drivers/usb/gadget/f_acm.c | 137 +--
drivers/usb/gadget/f_ecm.c | 4 +-
drivers/usb/gadget/f_eem.c | 3 +-
drivers/usb/gadget/f_ncm.c | 4 +-
drivers/usb/gadget/f_obex.c | 227 ++++-
drivers/usb/gadget/f_rndis.c | 3 +-
drivers/usb/gadget/f_serial.c | 174 +++-
drivers/usb/gadget/f_sourcesink.c | 4 +-
drivers/usb/gadget/f_subset.c | 4 +-
drivers/usb/gadget/f_uvc.c | 262 +++--
drivers/usb/gadget/f_uvc.h | 12 +-
drivers/usb/gadget/fsl_qe_udc.c | 18 +-
drivers/usb/gadget/fsl_udc_core.c | 83 +-
drivers/usb/gadget/fusb300_udc.c | 46 +-
drivers/usb/gadget/fusb300_udc.h | 2 +-
drivers/usb/gadget/g_ffs.c | 35 +-
drivers/usb/gadget/goku_udc.c | 20 +-
drivers/usb/gadget/goku_udc.h | 3 +-
drivers/usb/gadget/imx_udc.c | 16 +-
drivers/usb/gadget/lpc32xx_udc.c | 51 +-
drivers/usb/gadget/m66592-udc.c | 17 -
drivers/usb/gadget/multi.c | 33 +-
drivers/usb/gadget/mv_u3d_core.c | 65 +-
drivers/usb/gadget/mv_udc.h | 3 +-
drivers/usb/gadget/mv_udc_core.c | 117 +--
drivers/usb/gadget/ncm.c | 13 +-
drivers/usb/gadget/net2272.c | 25 +-
drivers/usb/gadget/net2280.c | 25 +-
drivers/usb/gadget/nokia.c | 95 +-
drivers/usb/gadget/omap_udc.c | 21 +-
drivers/usb/gadget/pch_udc.c | 21 +-
drivers/usb/gadget/pxa25x_udc.c | 16 -
drivers/usb/gadget/pxa27x_udc.c | 51 +-
drivers/usb/gadget/r8a66597-udc.c | 14 +-
drivers/usb/gadget/s3c-hsotg.c | 78 +-
drivers/usb/gadget/s3c-hsudc.c | 16 -
drivers/usb/gadget/s3c2410_udc.c | 15 -
drivers/usb/gadget/serial.c | 59 +-
drivers/usb/gadget/u_ether.c | 32 +-
drivers/usb/gadget/u_ether.h | 27 +-
drivers/usb/gadget/u_serial.h | 1 -
drivers/usb/gadget/udc-core.c | 90 +-
drivers/usb/gadget/uvc.h | 3 +-
drivers/usb/gadget/uvc_queue.c | 538 ++++-------
drivers/usb/gadget/uvc_queue.h | 32 +-
drivers/usb/gadget/uvc_v4l2.c | 71 +-
drivers/usb/gadget/uvc_video.c | 31 +-
drivers/usb/gadget/zero.c | 2 +
drivers/usb/host/Kconfig | 217 +++--
drivers/usb/host/Makefile | 6 +
drivers/usb/host/ehci-atmel.c | 88 +-
drivers/usb/host/ehci-dbg.c | 15 +-
drivers/usb/host/ehci-fsl.c | 9 +
drivers/usb/host/ehci-hcd.c | 107 +--
drivers/usb/host/ehci-hub.c | 23 +-
drivers/usb/host/ehci-msm.c | 91 +-
drivers/usb/host/ehci-mv.c | 56 +-
drivers/usb/host/ehci-mxc.c | 10 +-
drivers/usb/host/ehci-omap.c | 331 +++----
drivers/usb/host/ehci-orion.c | 86 +-
drivers/usb/host/ehci-pci.c | 14 +-
drivers/usb/host/ehci-platform.c | 36 +-
drivers/usb/host/ehci-ps3.c | 1 -
drivers/usb/host/ehci-q.c | 241 ++---
drivers/usb/host/ehci-s5p.c | 180 ++--
drivers/usb/host/ehci-sched.c | 40 +-
drivers/usb/host/ehci-sh.c | 5 +-
drivers/usb/host/ehci-spear.c | 119 ++-
drivers/usb/host/ehci-tegra.c | 34 +-
drivers/usb/host/ehci-timer.c | 72 +-
drivers/usb/host/ehci-vt8500.c | 150 ---
drivers/usb/host/ehci.h | 16 +-
drivers/usb/host/ohci-exynos.c | 14 +-
drivers/usb/host/ohci-hcd.c | 136 ++-
drivers/usb/host/ohci-hub.c | 6 -
drivers/usb/host/ohci-omap3.c | 24 +-
drivers/usb/host/sl811-hcd.c | 2 +-
drivers/usb/host/u132-hcd.c | 9 +-
drivers/usb/host/xhci-hub.c | 2 +-
drivers/usb/host/xhci-mem.c | 16 +-
drivers/usb/host/xhci.c | 18 +-
drivers/usb/host/xhci.h | 4 +-
drivers/usb/image/Kconfig | 4 +-
drivers/usb/misc/Kconfig | 21 -
drivers/usb/misc/appledisplay.c | 1 +
drivers/usb/misc/sisusbvga/Kconfig | 2 +-
drivers/usb/misc/sisusbvga/sisusb.c | 2 +-
drivers/usb/misc/usb3503.c | 13 +-
drivers/usb/mon/Kconfig | 1 -
drivers/usb/musb/Kconfig | 8 +-
drivers/usb/musb/am35x.c | 8 +-
drivers/usb/musb/blackfin.c | 6 +-
drivers/usb/musb/cppi_dma.c | 17 +-
drivers/usb/musb/da8xx.c | 8 +-
drivers/usb/musb/davinci.c | 4 +-
drivers/usb/musb/musb_core.c | 71 +-
drivers/usb/musb/musb_dsps.c | 14 +-
drivers/usb/musb/musb_gadget.c | 156 +--
drivers/usb/musb/musb_gadget_ep0.c | 6 +-
drivers/usb/musb/musb_host.c | 119 ++-
drivers/usb/musb/musb_virthub.c | 4 +-
drivers/usb/musb/omap2430.c | 32 +-
drivers/usb/musb/tusb6010.c | 14 +-
drivers/usb/musb/ux500.c | 106 +++
drivers/usb/musb/ux500_dma.c | 24 +-
drivers/usb/otg/Kconfig | 141 ---
drivers/usb/otg/Makefile | 24 -
drivers/usb/otg/ab8500-usb.c | 596 ------------
drivers/usb/phy/Kconfig | 180 +++-
drivers/usb/phy/Makefile | 35 +-
drivers/usb/phy/isp1301.c | 71 --
drivers/usb/phy/phy-ab8500-usb.c | 924 ++++++++++++++++++
drivers/usb/{otg/fsl_otg.c => phy/phy-fsl-usb.c} | 34 +-
drivers/usb/{otg/fsl_otg.h => phy/phy-fsl-usb.h} | 0
drivers/usb/{otg/otg_fsm.c => phy/phy-fsm-usb.c} | 4 +-
drivers/usb/{otg/otg_fsm.h => phy/phy-fsm-usb.h} | 0
.../{otg/gpio_vbus.c => phy/phy-gpio-vbus-usb.c} | 9 +-
.../{otg/isp1301_omap.c => phy/phy-isp1301-omap.c} | 10 +-
drivers/usb/phy/phy-isp1301.c | 162 ++++
drivers/usb/{otg/msm_otg.c => phy/phy-msm-usb.c} | 0
drivers/usb/phy/{mv_u3d_phy.c => phy-mv-u3d-usb.c} | 4 +-
drivers/usb/phy/{mv_u3d_phy.h => phy-mv-u3d-usb.h} | 0
drivers/usb/{otg/mv_otg.c => phy/phy-mv-usb.c} | 30 +-
drivers/usb/{otg/mv_otg.h => phy/phy-mv-usb.h} | 3 +-
drivers/usb/{otg/mxs-phy.c => phy/phy-mxs-usb.c} | 41 +-
drivers/usb/{otg/nop-usb-xceiv.c => phy/phy-nop.c} | 143 ++-
.../phy/{omap-control-usb.c => phy-omap-control.c} | 0
drivers/usb/phy/{omap-usb2.c => phy-omap-usb2.c} | 0
drivers/usb/phy/{omap-usb3.c => phy-omap-usb3.c} | 0
drivers/usb/phy/{rcar-phy.c => phy-rcar-usb.c} | 0
drivers/usb/phy/phy-samsung-usb.c | 236 +++++
drivers/usb/phy/phy-samsung-usb.h | 327 +++++++
drivers/usb/phy/phy-samsung-usb2.c | 509 ++++++++++
drivers/usb/phy/phy-samsung-usb3.c | 347 +++++++
.../usb/phy/{tegra_usb_phy.c => phy-tegra-usb.c} | 13 +-
.../{otg/twl4030-usb.c => phy/phy-twl4030-usb.c} | 178 ++--
.../{otg/twl6030-usb.c => phy/phy-twl6030-usb.c} | 15 +-
.../ulpi_viewport.c => phy/phy-ulpi-viewport.c} | 0
drivers/usb/{otg/ulpi.c => phy/phy-ulpi.c} | 0
drivers/usb/{otg/otg.c => phy/phy.c} | 64 +-
drivers/usb/phy/samsung-usbphy.c | 928 ------------------
drivers/usb/renesas_usbhs/Kconfig | 2 +-
drivers/usb/renesas_usbhs/fifo.c | 1 -
drivers/usb/renesas_usbhs/fifo.h | 2 -
drivers/usb/renesas_usbhs/mod_gadget.c | 24 +-
drivers/usb/serial/Kconfig | 19 +-
drivers/usb/serial/Makefile | 1 +
drivers/usb/serial/ark3116.c | 87 +-
drivers/usb/serial/bus.c | 5 +-
drivers/usb/serial/ch341.c | 30 +-
drivers/usb/serial/cp210x.c | 6 +-
drivers/usb/serial/cyberjack.c | 19 +-
drivers/usb/serial/cypress_m8.c | 94 +-
drivers/usb/serial/digi_acceleport.c | 95 +-
drivers/usb/serial/f81232.c | 13 +-
drivers/usb/serial/ftdi_sio.c | 144 +--
drivers/usb/serial/ftdi_sio_ids.h | 4 +-
drivers/usb/serial/garmin_gps.c | 10 -
drivers/usb/serial/generic.c | 144 ++-
drivers/usb/serial/io_edgeport.c | 76 +-
drivers/usb/serial/io_tables.h | 12 +-
drivers/usb/serial/io_ti.c | 98 +-
drivers/usb/serial/iuu_phoenix.c | 21 +-
drivers/usb/serial/keyspan.c | 96 +-
drivers/usb/serial/keyspan_pda.c | 19 +-
drivers/usb/serial/kl5kusb105.c | 30 +-
drivers/usb/serial/kobil_sct.c | 103 +-
drivers/usb/serial/mct_u232.c | 131 +--
drivers/usb/serial/metro-usb.c | 5 +-
drivers/usb/serial/mos7720.c | 68 +-
drivers/usb/serial/mos7840.c | 157 +--
drivers/usb/serial/omninet.c | 81 +-
drivers/usb/serial/opticon.c | 18 +-
drivers/usb/serial/option.c | 8 +
drivers/usb/serial/oti6858.c | 30 +-
drivers/usb/serial/pl2303.c | 39 +-
drivers/usb/serial/quatech2.c | 104 +-
drivers/usb/serial/sierra.c | 39 +-
drivers/usb/serial/spcp8x5.c | 301 ++----
drivers/usb/serial/ssu100.c | 100 +-
drivers/usb/serial/symbolserial.c | 130 +--
drivers/usb/serial/ti_usb_3410_5052.c | 163 +---
drivers/usb/serial/usb-serial.c | 232 +++--
drivers/usb/serial/usb_wwan.c | 25 +-
drivers/usb/serial/visor.c | 16 +-
drivers/usb/serial/wishbone-serial.c | 95 ++
drivers/usb/storage/Kconfig | 7 +-
drivers/usb/storage/alauda.c | 101 +-
drivers/usb/storage/cypress_atacb.c | 18 +-
drivers/usb/storage/datafab.c | 59 +-
drivers/usb/storage/debug.c | 36 +-
drivers/usb/storage/debug.h | 23 +-
drivers/usb/storage/ene_ub6250.c | 86 +-
drivers/usb/storage/freecom.c | 85 +-
drivers/usb/storage/initializers.c | 10 +-
drivers/usb/storage/isd200.c | 295 +++---
drivers/usb/storage/jumpshot.c | 69 +-
drivers/usb/storage/karma.c | 6 +-
drivers/usb/storage/onetouch.c | 4 +-
drivers/usb/storage/option_ms.c | 23 +-
drivers/usb/storage/realtek_cr.c | 128 +--
drivers/usb/storage/scsiglue.c | 13 +-
drivers/usb/storage/sddr09.c | 146 ++-
drivers/usb/storage/sddr55.c | 86 +-
drivers/usb/storage/shuttle_usbat.c | 119 +--
drivers/usb/storage/sierra_ms.c | 43 +-
drivers/usb/storage/transport.c | 181 ++--
drivers/usb/storage/usb.c | 117 +--
drivers/usb/usb-common.c | 47 +
drivers/usb/usb-skeleton.c | 32 +-
drivers/usb/wusbcore/Kconfig | 2 -
include/linux/platform_data/dwc3-omap.h | 4 -
include/linux/platform_data/mv_usb.h | 2 -
include/linux/usb.h | 13 +-
include/linux/usb/cdc-wdm.h | 2 +
include/linux/usb/ch9.h | 9 +
include/linux/usb/composite.h | 3 +
include/linux/usb/dwc3-omap.h | 6 +-
include/linux/usb/gadget.h | 11 +
include/linux/usb/gadget_configfs.h | 110 +++
include/linux/usb/hcd.h | 6 +-
include/linux/usb/musb-ux500.h | 31 +
include/linux/usb/nop-usb-xceiv.h | 5 +
include/linux/usb/otg.h | 9 +-
include/linux/usb/phy.h | 33 +-
include/linux/usb/renesas_usbhs.h | 6 +-
include/linux/usb/serial.h | 12 +-
include/linux/usb/tegra_usb_phy.h | 10 +-
include/uapi/linux/usb/cdc-wdm.h | 21 +
include/uapi/linux/usb/ch9.h | 4 +-
325 files changed, 10498 insertions(+), 9858 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/ehci-omap.txt
create mode 100644 Documentation/devicetree/bindings/usb/ohci-omap3.txt
create mode 100644 Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
create mode 100644 drivers/usb/chipidea/usbmisc_imx.c
delete mode 100644 drivers/usb/chipidea/usbmisc_imx6q.c
create mode 100644 drivers/usb/gadget/configfs.c
delete mode 100644 drivers/usb/host/ehci-vt8500.c
delete mode 100644 drivers/usb/otg/Kconfig
delete mode 100644 drivers/usb/otg/Makefile
delete mode 100644 drivers/usb/otg/ab8500-usb.c
delete mode 100644 drivers/usb/phy/isp1301.c
create mode 100644 drivers/usb/phy/phy-ab8500-usb.c
rename drivers/usb/{otg/fsl_otg.c => phy/phy-fsl-usb.c} (97%)
rename drivers/usb/{otg/fsl_otg.h => phy/phy-fsl-usb.h} (100%)
rename drivers/usb/{otg/otg_fsm.c => phy/phy-fsm-usb.c} (99%)
rename drivers/usb/{otg/otg_fsm.h => phy/phy-fsm-usb.h} (100%)
rename drivers/usb/{otg/gpio_vbus.c => phy/phy-gpio-vbus-usb.c} (98%)
rename drivers/usb/{otg/isp1301_omap.c => phy/phy-isp1301-omap.c} (99%)
create mode 100644 drivers/usb/phy/phy-isp1301.c
rename drivers/usb/{otg/msm_otg.c => phy/phy-msm-usb.c} (100%)
rename drivers/usb/phy/{mv_u3d_phy.c => phy-mv-u3d-usb.c} (99%)
rename drivers/usb/phy/{mv_u3d_phy.h => phy-mv-u3d-usb.h} (100%)
rename drivers/usb/{otg/mv_otg.c => phy/phy-mv-usb.c} (97%)
rename drivers/usb/{otg/mv_otg.h => phy/phy-mv-usb.h} (99%)
rename drivers/usb/{otg/mxs-phy.c => phy/phy-mxs-usb.c} (84%)
rename drivers/usb/{otg/nop-usb-xceiv.c => phy/phy-nop.c} (55%)
rename drivers/usb/phy/{omap-control-usb.c => phy-omap-control.c} (100%)
rename drivers/usb/phy/{omap-usb2.c => phy-omap-usb2.c} (100%)
rename drivers/usb/phy/{omap-usb3.c => phy-omap-usb3.c} (100%)
rename drivers/usb/phy/{rcar-phy.c => phy-rcar-usb.c} (100%)
create mode 100644 drivers/usb/phy/phy-samsung-usb.c
create mode 100644 drivers/usb/phy/phy-samsung-usb.h
create mode 100644 drivers/usb/phy/phy-samsung-usb2.c
create mode 100644 drivers/usb/phy/phy-samsung-usb3.c
rename drivers/usb/phy/{tegra_usb_phy.c => phy-tegra-usb.c} (98%)
rename drivers/usb/{otg/twl4030-usb.c => phy/phy-twl4030-usb.c} (84%)
rename drivers/usb/{otg/twl6030-usb.c => phy/phy-twl6030-usb.c} (97%)
rename drivers/usb/{otg/ulpi_viewport.c => phy/phy-ulpi-viewport.c} (100%)
rename drivers/usb/{otg/ulpi.c => phy/phy-ulpi.c} (100%)
rename drivers/usb/{otg/otg.c => phy/phy.c} (88%)
delete mode 100644 drivers/usb/phy/samsung-usbphy.c
create mode 100644 drivers/usb/serial/wishbone-serial.c
create mode 100644 include/linux/usb/gadget_configfs.h
create mode 100644 include/linux/usb/musb-ux500.h
create mode 100644 include/uapi/linux/usb/cdc-wdm.h
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PATCH] USB patches for 3.10-rc1
2013-04-29 16:23 [GIT PATCH] USB patches for 3.10-rc1 Greg KH
@ 2013-04-29 19:41 ` Linus Torvalds
2013-04-29 21:14 ` Alan Stern
0 siblings, 1 reply; 9+ messages in thread
From: Linus Torvalds @ 2013-04-29 19:41 UTC (permalink / raw)
To: Greg KH, Alan Stern; +Cc: Andrew Morton, Linux Kernel Mailing List, USB list
On Mon, Apr 29, 2013 at 9:23 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-3.10-rc1
This has some odd things in it, but I made the mistake of pushing out
my merge before I noticed, so it's out there now regardless.
See here: commit 84ebc10294a3 ("USB: remove CONFIG_USB_SUSPEND
option") claims to remove the USB_SUSPEND config option, but doesn't
actually do so.
And no, it's not my merge that is in error, although there may be
merge errors in addition to the oddities I've found. Doing a
git grep -w USB_SUSPEND 84ebc10294a3
shows that there remains things that have "depends on .. USB_SUSPEND"
even in the very commit that claims to remove the option. Later
commits then move them around (eg the whole drivers/usb/otg ->
drivers/usb/phy movement), but the USB_SUSPEND stays around.
Hmm? I'm assuming you applied a patch without noticing that in the
meantime other users of USB_SUSPEND had grow up?
Linus
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PATCH] USB patches for 3.10-rc1
2013-04-29 19:41 ` Linus Torvalds
@ 2013-04-29 21:14 ` Alan Stern
2013-04-29 21:31 ` Linus Torvalds
2013-05-01 16:13 ` [PATCH] USB: remove remaining instances of USB_SUSPEND Alan Stern
0 siblings, 2 replies; 9+ messages in thread
From: Alan Stern @ 2013-04-29 21:14 UTC (permalink / raw)
To: Linus Torvalds
Cc: Greg KH, Andrew Morton, Linux Kernel Mailing List, USB list
On Mon, 29 Apr 2013, Linus Torvalds wrote:
> On Mon, Apr 29, 2013 at 9:23 AM, Greg KH <gregkh@linuxfoundation.org> wrote:
> >
> > git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git/ tags/usb-3.10-rc1
>
> This has some odd things in it, but I made the mistake of pushing out
> my merge before I noticed, so it's out there now regardless.
>
> See here: commit 84ebc10294a3 ("USB: remove CONFIG_USB_SUSPEND
> option") claims to remove the USB_SUSPEND config option, but doesn't
> actually do so.
>
> And no, it's not my merge that is in error, although there may be
> merge errors in addition to the oddities I've found. Doing a
>
> git grep -w USB_SUSPEND 84ebc10294a3
>
> shows that there remains things that have "depends on .. USB_SUSPEND"
> even in the very commit that claims to remove the option. Later
> commits then move them around (eg the whole drivers/usb/otg ->
> drivers/usb/phy movement), but the USB_SUSPEND stays around.
Strange. I was quite sure at the time that I had removed all traces of
USB_SUSPEND, but clearly that was wrong.
Anyway, I'll send in a patch to remove the remaining usages. Many of
them are in comments, but some are in Kconfig files where they will
really matter.
> Hmm? I'm assuming you applied a patch without noticing that in the
> meantime other users of USB_SUSPEND had grow up?
Or they survived in some other manner. It's possible that I edited
these files but then failed to include them in the final patch.
What other things seemed odd about Greg's pull request?
Alan Stern
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PATCH] USB patches for 3.10-rc1
2013-04-29 21:14 ` Alan Stern
@ 2013-04-29 21:31 ` Linus Torvalds
2013-04-30 6:26 ` Felipe Balbi
2013-05-01 16:13 ` [PATCH] USB: remove remaining instances of USB_SUSPEND Alan Stern
1 sibling, 1 reply; 9+ messages in thread
From: Linus Torvalds @ 2013-04-29 21:31 UTC (permalink / raw)
To: Alan Stern; +Cc: Greg KH, Andrew Morton, Linux Kernel Mailing List, USB list
On Mon, Apr 29, 2013 at 2:14 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
>
> What other things seemed odd about Greg's pull request?
The only other thing I noticed was the new CONFIG_USB_PHY quesiton,
which is not something that I think is sensible to ask from a user,
and the help text doesn't really help anything either.
I think the question may make sense, but the wording does not.
*EVERYBODY* wants a USB PHY. You can't have USB without a physical
layer unless it's a purely virtual device. There's one in a EHCI
controller too. It's like a network chip - without a PHY there's no
point. Why ask about whether you want to support a phy or not? The
question makes no sense.
So I don't think the question should be "do you want a USB PHY". The
question should be "Do you want a driver for some of the specialized
external USB controllers" or something like that. Because as it is
now, anybody who actually reads the question is likely to answer "y",
I think, even if he just wants one of the *normal* USB chips that
don't split out the PHY.
Hmm? Or does PHY have some magic other meaning in USB circles? In
which case the wording should still be totally redone to not be so
confusing and misleading.
Linus
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [GIT PATCH] USB patches for 3.10-rc1
2013-04-29 21:31 ` Linus Torvalds
@ 2013-04-30 6:26 ` Felipe Balbi
0 siblings, 0 replies; 9+ messages in thread
From: Felipe Balbi @ 2013-04-30 6:26 UTC (permalink / raw)
To: Linus Torvalds
Cc: Alan Stern, Greg KH, Andrew Morton, Linux Kernel Mailing List,
USB list
[-- Attachment #1: Type: text/plain, Size: 1861 bytes --]
Hi,
On Mon, Apr 29, 2013 at 02:31:59PM -0700, Linus Torvalds wrote:
> On Mon, Apr 29, 2013 at 2:14 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
> >
> > What other things seemed odd about Greg's pull request?
>
> The only other thing I noticed was the new CONFIG_USB_PHY quesiton,
> which is not something that I think is sensible to ask from a user,
> and the help text doesn't really help anything either.
>
> I think the question may make sense, but the wording does not.
>
> *EVERYBODY* wants a USB PHY. You can't have USB without a physical
> layer unless it's a purely virtual device. There's one in a EHCI
> controller too. It's like a network chip - without a PHY there's no
> point. Why ask about whether you want to support a phy or not? The
> question makes no sense.
right, the thing is that the standard host-only drivers (EHCI, OHCI,
UHCI and XHCI) still don't know about the PHY layer. They give no
SW visibility on the PHY at all so I felt that adding unused code to the
x86 binaries would worse than just asking the user if they want the PHY
layer enabled or not.
In any case, *HCI drivers need to learn about the PHY layer, at least on
their embedded forms (OMAP, Tegra, Marvel, SuperH, etc) since those will
need SW control of the PHY for e.g. PM, remote wakeup, and few other
cases.
> So I don't think the question should be "do you want a USB PHY". The
> question should be "Do you want a driver for some of the specialized
> external USB controllers" or something like that. Because as it is
> now, anybody who actually reads the question is likely to answer "y",
> I think, even if he just wants one of the *normal* USB chips that
> don't split out the PHY.
makes sense.
> Hmm? Or does PHY have some magic other meaning in USB circles? In
no, it means the same thing.
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH] USB: remove remaining instances of USB_SUSPEND
2013-04-29 21:14 ` Alan Stern
2013-04-29 21:31 ` Linus Torvalds
@ 2013-05-01 16:13 ` Alan Stern
2013-05-01 16:22 ` Greg KH
2013-05-01 16:24 ` Linus Torvalds
1 sibling, 2 replies; 9+ messages in thread
From: Alan Stern @ 2013-05-01 16:13 UTC (permalink / raw)
To: Greg KH, Linus Torvalds; +Cc: Linux Kernel Mailing List, USB list
Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove
CONFIG_USB_SUSPEND option) failed to remove all of the usages of
USB_SUSPEND throughout the kernel. This patch (as1677) removes the
remaining instances of that symbol.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
---
As promised, here is a patch to finish the removal of USB_SUSPEND.
It's up-to-date with 3.9 and Greg's usb-next tree as of Monday. It's
possible that changes made since then or coming through other
subsystems have introduced new usages I'm not aware of.
It's up to the two of you to decide whether Linus should take this
directly or whether it should go through Greg.
Alan Stern
arch/arm/configs/omap1_defconfig | 1 -
arch/arm/configs/omap2plus_defconfig | 1 -
arch/mips/configs/db1000_defconfig | 1 -
arch/mips/configs/db1235_defconfig | 1 -
arch/mips/configs/lemote2f_defconfig | 1 -
arch/powerpc/configs/ps3_defconfig | 1 -
drivers/net/usb/usbnet.c | 2 +-
drivers/staging/gdm72xx/Kconfig | 2 +-
drivers/usb/core/Kconfig | 2 +-
drivers/usb/host/isp1760-hcd.c | 2 +-
drivers/usb/host/oxu210hp-hcd.c | 2 +-
drivers/usb/host/sl811-hcd.c | 2 +-
drivers/usb/phy/Kconfig | 4 ++--
13 files changed, 8 insertions(+), 14 deletions(-)
Index: usb-3.9/arch/arm/configs/omap1_defconfig
===================================================================
--- usb-3.9.orig/arch/arm/configs/omap1_defconfig
+++ usb-3.9/arch/arm/configs/omap1_defconfig
@@ -199,7 +199,6 @@ CONFIG_USB_PHY=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
Index: usb-3.9/arch/arm/configs/omap2plus_defconfig
===================================================================
--- usb-3.9.orig/arch/arm/configs/omap2plus_defconfig
+++ usb-3.9/arch/arm/configs/omap2plus_defconfig
@@ -199,7 +199,6 @@ CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_DEVICEFS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=y
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
Index: usb-3.9/arch/mips/configs/db1000_defconfig
===================================================================
--- usb-3.9.orig/arch/mips/configs/db1000_defconfig
+++ usb-3.9/arch/mips/configs/db1000_defconfig
@@ -228,7 +228,6 @@ CONFIG_HIDRAW=y
CONFIG_USB_HID=y
CONFIG_USB_SUPPORT=y
CONFIG_USB=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
Index: usb-3.9/arch/mips/configs/db1235_defconfig
===================================================================
--- usb-3.9.orig/arch/mips/configs/db1235_defconfig
+++ usb-3.9/arch/mips/configs/db1235_defconfig
@@ -344,7 +344,6 @@ CONFIG_UHID=y
CONFIG_USB_HIDDEV=y
CONFIG_USB=y
CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
Index: usb-3.9/arch/mips/configs/lemote2f_defconfig
===================================================================
--- usb-3.9.orig/arch/mips/configs/lemote2f_defconfig
+++ usb-3.9/arch/mips/configs/lemote2f_defconfig
@@ -300,7 +300,6 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_OTG_WHITELIST=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
Index: usb-3.9/arch/powerpc/configs/ps3_defconfig
===================================================================
--- usb-3.9.orig/arch/powerpc/configs/ps3_defconfig
+++ usb-3.9/arch/powerpc/configs/ps3_defconfig
@@ -136,7 +136,6 @@ CONFIG_HID_SMARTJOYPLUS=m
CONFIG_USB_HIDDEV=y
CONFIG_USB=m
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_SUSPEND=y
CONFIG_USB_MON=m
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
Index: usb-3.9/drivers/net/usb/usbnet.c
===================================================================
--- usb-3.9.orig/drivers/net/usb/usbnet.c
+++ usb-3.9/drivers/net/usb/usbnet.c
@@ -1385,7 +1385,7 @@ usbnet_probe (struct usb_interface *udev
/* usbnet already took usb runtime pm, so have to enable the feature
* for usb interface, otherwise usb_autopm_get_interface may return
- * failure if USB_SUSPEND(RUNTIME_PM) is enabled.
+ * failure if RUNTIME_PM is enabled.
*/
if (!driver->supports_autosuspend) {
driver->supports_autosuspend = 1;
Index: usb-3.9/drivers/staging/gdm72xx/Kconfig
===================================================================
--- usb-3.9.orig/drivers/staging/gdm72xx/Kconfig
+++ usb-3.9/drivers/staging/gdm72xx/Kconfig
@@ -39,7 +39,7 @@ if WIMAX_GDM72XX_USB
config WIMAX_GDM72XX_USB_PM
bool "Enable power managerment support"
- depends on USB_SUSPEND
+ depends on PM_RUNTIME
endif # WIMAX_GDM72XX_USB
Index: usb-3.9/drivers/usb/core/Kconfig
===================================================================
--- usb-3.9.orig/drivers/usb/core/Kconfig
+++ usb-3.9/drivers/usb/core/Kconfig
@@ -51,7 +51,7 @@ config USB_DYNAMIC_MINORS
config USB_OTG
bool "OTG support"
- depends on USB_SUSPEND
+ depends on PM_RUNTIME
default n
help
The most notable feature of USB OTG is support for a
Index: usb-3.9/drivers/usb/host/isp1760-hcd.c
===================================================================
--- usb-3.9.orig/drivers/usb/host/isp1760-hcd.c
+++ usb-3.9/drivers/usb/host/isp1760-hcd.c
@@ -1739,7 +1739,7 @@ static int isp1760_hub_status_data(struc
int retval = 1;
unsigned long flags;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ /* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;
Index: usb-3.9/drivers/usb/host/oxu210hp-hcd.c
===================================================================
--- usb-3.9.orig/drivers/usb/host/oxu210hp-hcd.c
+++ usb-3.9/drivers/usb/host/oxu210hp-hcd.c
@@ -3084,7 +3084,7 @@ static int oxu_hub_status_data(struct us
int ports, i, retval = 1;
unsigned long flags;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ /* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;
Index: usb-3.9/drivers/usb/host/sl811-hcd.c
===================================================================
--- usb-3.9.orig/drivers/usb/host/sl811-hcd.c
+++ usb-3.9/drivers/usb/host/sl811-hcd.c
@@ -22,7 +22,7 @@
* and usb-storage.
*
* TODO:
- * - usb suspend/resume triggered by sl811 (with USB_SUSPEND)
+ * - usb suspend/resume triggered by sl811 (with PM_RUNTIME)
* - various issues noted in the code
* - performance work; use both register banks; ...
* - use urb->iso_frame_desc[] with ISO transfers
Index: usb-3.9/drivers/usb/phy/Kconfig
===================================================================
--- usb-3.9.orig/drivers/usb/phy/Kconfig
+++ usb-3.9/drivers/usb/phy/Kconfig
@@ -25,7 +25,7 @@ config AB8500_USB
config FSL_USB2_OTG
bool "Freescale USB OTG Transceiver Driver"
- depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND
+ depends on USB_EHCI_FSL && USB_FSL_USB2 && PM_RUNTIME
select USB_OTG
help
Enable this to support Freescale USB OTG transceiver.
@@ -162,7 +162,7 @@ config USB_MSM_OTG
config USB_MV_OTG
tristate "Marvell USB OTG support"
- depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND
+ depends on USB_EHCI_MV && USB_MV_UDC && PM_RUNTIME
select USB_OTG
help
Say Y here if you want to build Marvell USB OTG transciever
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] USB: remove remaining instances of USB_SUSPEND
2013-05-01 16:13 ` [PATCH] USB: remove remaining instances of USB_SUSPEND Alan Stern
@ 2013-05-01 16:22 ` Greg KH
2013-05-01 16:24 ` Linus Torvalds
1 sibling, 0 replies; 9+ messages in thread
From: Greg KH @ 2013-05-01 16:22 UTC (permalink / raw)
To: Alan Stern; +Cc: Linus Torvalds, Linux Kernel Mailing List, USB list
On Wed, May 01, 2013 at 12:13:54PM -0400, Alan Stern wrote:
> Commit 84ebc10294a3d7be4c66f51070b7aedbaa24de9b (USB: remove
> CONFIG_USB_SUSPEND option) failed to remove all of the usages of
> USB_SUSPEND throughout the kernel. This patch (as1677) removes the
> remaining instances of that symbol.
>
> Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
>
> ---
>
> As promised, here is a patch to finish the removal of USB_SUSPEND.
> It's up-to-date with 3.9 and Greg's usb-next tree as of Monday. It's
> possible that changes made since then or coming through other
> subsystems have introduced new usages I'm not aware of.
>
> It's up to the two of you to decide whether Linus should take this
> directly or whether it should go through Greg.
I can take it after 3.10-rc1 is out, that way I'll also sweep the tree
for any remaining instances that other trees might have drug in during
the merge window process.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] USB: remove remaining instances of USB_SUSPEND
2013-05-01 16:13 ` [PATCH] USB: remove remaining instances of USB_SUSPEND Alan Stern
2013-05-01 16:22 ` Greg KH
@ 2013-05-01 16:24 ` Linus Torvalds
2013-05-02 13:58 ` Alan Stern
1 sibling, 1 reply; 9+ messages in thread
From: Linus Torvalds @ 2013-05-01 16:24 UTC (permalink / raw)
To: Alan Stern; +Cc: Greg KH, Linux Kernel Mailing List, USB list
On Wed, May 1, 2013 at 9:13 AM, Alan Stern <stern@rowland.harvard.edu> wrote:
>
> This patch (as1677) removes the remaining instances of that symbol.
Btw, what are these "asXXXX" ID's, and what does the noise buy us?
Doing a
git log | egrep -w 'as[0-9]{3,}'
shows that this has been going on forever, but it still doesn't make
any *sense*. It adds nothing worthwhile. In fact, doing
git log | grep 'This patch ('
shows that you're pretty the only one doing it, but there's *one*
other one jidong xiao: jx001. I really don't see the advantage of
having this kind of random noise in the kernel logs.
Linus
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] USB: remove remaining instances of USB_SUSPEND
2013-05-01 16:24 ` Linus Torvalds
@ 2013-05-02 13:58 ` Alan Stern
0 siblings, 0 replies; 9+ messages in thread
From: Alan Stern @ 2013-05-02 13:58 UTC (permalink / raw)
To: Linus Torvalds; +Cc: Greg KH, Linux Kernel Mailing List, USB list
On Wed, 1 May 2013, Linus Torvalds wrote:
> On Wed, May 1, 2013 at 9:13 AM, Alan Stern <stern@rowland.harvard.edu> wrote:
> >
> > This patch (as1677) removes the remaining instances of that symbol.
>
> Btw, what are these "asXXXX" ID's, and what does the noise buy us?
>
> Doing a
>
> git log | egrep -w 'as[0-9]{3,}'
>
> shows that this has been going on forever, but it still doesn't make
> any *sense*. It adds nothing worthwhile. In fact, doing
>
> git log | grep 'This patch ('
>
> shows that you're pretty the only one doing it, but there's *one*
> other one jidong xiao: jx001. I really don't see the advantage of
> having this kind of random noise in the kernel logs.
I put those indexes in the patch descriptions to help with my own file
organization. Without them, the patch files are just a big mess of
stuff with more or less arbitrary names. The indexes have no meaning
to anybody else.
Originally I put the indexes in the email subject lines. Greg didn't
like this, so at his request I moved them into the patch descriptions.
I suppose they could be moved below the tear line, so that they
wouldn't show up in the final commits but only in the email messages.
That would retain most of their utility for me without bothering anyone
else.
Jidong Xiao put that label in his patch because he was imitating me.
Alan Stern
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2013-05-02 13:59 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-04-29 16:23 [GIT PATCH] USB patches for 3.10-rc1 Greg KH
2013-04-29 19:41 ` Linus Torvalds
2013-04-29 21:14 ` Alan Stern
2013-04-29 21:31 ` Linus Torvalds
2013-04-30 6:26 ` Felipe Balbi
2013-05-01 16:13 ` [PATCH] USB: remove remaining instances of USB_SUSPEND Alan Stern
2013-05-01 16:22 ` Greg KH
2013-05-01 16:24 ` Linus Torvalds
2013-05-02 13:58 ` Alan Stern
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox