Re: [PATCH 6/6] ASoC: ux500: Use the first two AD slots for capture

[Lee Jones <lee.jones@linaro.org>]

On Wed, 08 May 2013, Fabio Baltieri wrote:

> Set AD_OUT1 and AD_OUT2, corresponding to LINL and LINR pins, as the
> default input slots for the capture interfaces.
> 
> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
> ---
>  sound/soc/codecs/ab8500-codec.c | 13 +++++++------
>  1 file changed, 7 insertions(+), 6 deletions(-)
> 
> diff --git a/sound/soc/codecs/ab8500-codec.c b/sound/soc/codecs/ab8500-codec.c
> index 7c026d4..9dafd52 100644
> --- a/sound/soc/codecs/ab8500-codec.c
> +++ b/sound/soc/codecs/ab8500-codec.c
> @@ -2334,17 +2334,18 @@ static int ab8500_codec_set_dai_tdm_slot(struct snd_soc_dai *dai,
>  	case 0:
>  		break;
>  	case 1:
> -		/* AD_OUT3 -> slot 0 & 1 */
> -		snd_soc_update_bits(codec, AB8500_ADSLOTSEL1, AB8500_MASK_ALL,
> -				AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_EVEN |
> -				AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_ODD);
> +		/* AD_OUT1 -> slot 0 & 1 */
> +		snd_soc_update_bits(codec, AB8500_ADSLOTSEL1,
> +				AB8500_MASK_ALL,
> +				AB8500_ADSLOTSELX_AD_OUT1_TO_SLOT_EVEN |
> +				AB8500_ADSLOTSELX_AD_OUT1_TO_SLOT_ODD);
>  		break;
>  	case 2:
> -		/* AD_OUT3 -> slot 0, AD_OUT2 -> slot 1 */
> +		/* AD_OUT1 -> slot 0, AD_OUT2 -> slot 1 */
>  		snd_soc_update_bits(codec,
>  				AB8500_ADSLOTSEL1,
>  				AB8500_MASK_ALL,
> -				AB8500_ADSLOTSELX_AD_OUT3_TO_SLOT_EVEN |
> +				AB8500_ADSLOTSELX_AD_OUT1_TO_SLOT_EVEN |
>  				AB8500_ADSLOTSELX_AD_OUT2_TO_SLOT_ODD);
>  		break;
>  	case 8:

Acked-by: Lee Jones <lee.jones@linaro.org>

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog