From: Dimitri Sivanich <sivanich@sgi.com>
To: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Alexander Gordeev <agordeev@redhat.com>,
Suresh Siddha <suresh.b.siddha@intel.com>,
linux-kernel@vger.kernel.org, x86@kernel.org,
Russ Anderson <rja@sgi.com>, Mike Travis <travis@sgi.com>
Subject: Re: [PATCH] x86/UV: GRU distributed mode mappings
Date: Tue, 28 May 2013 08:41:06 -0500 [thread overview]
Message-ID: <20130528134106.GA5619@sgi.com> (raw)
In-Reply-To: <20130528075912.GA29336@gmail.com>
On Tue, May 28, 2013 at 09:59:12AM +0200, Ingo Molnar wrote:
>
> * Dimitri Sivanich <sivanich@sgi.com> wrote:
>
> > Setup mappings for GRU distributed mode and include them as untracked
> > pat ranges.
>
> Would be nice to have the customary changelog content:
>
> " Current code does (A), this has a problem when (B).
> We can improve this doing (C), because (D)."
>
> Or so - your changelog is pretty light on the 'why' aspect.
>
How about the following?
UV GRU hardware will support an optional distributed mode that will allow
per-node address mapping of local GRU space, as opposed to mapping all GRU
hardware to the same contiguous high space.
If GRU distributed mode is selected, setup per-node page table mappings and
include them as untracked pat ranges.
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
---
arch/x86/kernel/apic/x2apic_uv_x.c | 63 +++++++++++++++++++++++++++++----
1 file changed, 57 insertions(+), 6 deletions(-)
Index: linux/arch/x86/kernel/apic/x2apic_uv_x.c
===================================================================
--- linux.orig/arch/x86/kernel/apic/x2apic_uv_x.c
+++ linux/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -51,6 +51,8 @@ DEFINE_PER_CPU(int, x2apic_extra_bits);
static enum uv_system_type uv_system_type;
static u64 gru_start_paddr, gru_end_paddr;
+static u64 gru_dist_base, gru_first_node_paddr = -1LL, gru_last_node_paddr;
+static u64 gru_dist_lmask, gru_dist_umask;
static union uvh_apicid uvh_apicid;
int uv_min_hub_revision_id;
EXPORT_SYMBOL_GPL(uv_min_hub_revision_id);
@@ -72,7 +74,19 @@ static unsigned long __init uv_early_rea
static inline bool is_GRU_range(u64 start, u64 end)
{
- return start >= gru_start_paddr && end <= gru_end_paddr;
+ if (gru_dist_base) {
+ u64 su = start & gru_dist_umask; /* upper (incl pnode) bits */
+ u64 sl = start & gru_dist_lmask; /* base offset bits */
+ u64 eu = end & gru_dist_umask;
+ u64 el = end & gru_dist_lmask;
+
+ /* Must reside completely within a single GRU range */
+ return (sl == gru_dist_base && el == gru_dist_base &&
+ su >= gru_first_node_paddr &&
+ su <= gru_last_node_paddr &&
+ eu == su);
+ } else
+ return start >= gru_start_paddr && end <= gru_end_paddr;
}
static bool uv_is_untracked_pat_range(u64 start, u64 end)
@@ -470,19 +484,56 @@ static __init void map_high(char *id, un
init_extra_mapping_wb(paddr, bytes);
}
+static __init void map_gru_distributed(unsigned long c)
+{
+ union uvh_rh_gam_gru_overlay_config_mmr_u gru;
+ u64 paddr;
+ unsigned long bytes;
+ int nid;
+
+ gru.v = c;
+ /* only base bits 42:28 relevant in dist mode */
+ gru_dist_base = gru.v & 0x000007fff0000000UL;
+ if (!gru_dist_base) {
+ pr_info("UV: Map GRU_DIST base address NULL\n");
+ return;
+ }
+ bytes = 1UL << UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
+ gru_dist_lmask = ((1UL << uv_hub_info->m_val) - 1) & ~(bytes - 1);
+ gru_dist_umask = ~((1UL << uv_hub_info->m_val) - 1);
+ gru_dist_base &= gru_dist_lmask; /* Clear bits above M */
+ for_each_online_node(nid) {
+ paddr = ((u64)uv_node_to_pnode(nid) << uv_hub_info->m_val) |
+ gru_dist_base;
+ init_extra_mapping_wb(paddr, bytes);
+ gru_first_node_paddr = min(paddr, gru_first_node_paddr);
+ gru_last_node_paddr = max(paddr, gru_last_node_paddr);
+ }
+ /* Save upper (63:M) bits of address only for is_GRU_range */
+ gru_first_node_paddr &= gru_dist_umask;
+ gru_last_node_paddr &= gru_dist_umask;
+ pr_info("UV: Map GRU_DIST base 0x%016llx 0x%016llx - 0x%016llx\n",
+ gru_dist_base, gru_first_node_paddr, gru_last_node_paddr);
+}
+
static __init void map_gru_high(int max_pnode)
{
union uvh_rh_gam_gru_overlay_config_mmr_u gru;
int shift = UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT;
gru.v = uv_read_local_mmr(UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR);
- if (gru.s.enable) {
- map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
- gru_start_paddr = ((u64)gru.s.base << shift);
- gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
- } else {
+ if (!gru.s.enable) {
pr_info("UV: GRU disabled\n");
+ return;
+ }
+
+ if (is_uv3_hub() && gru.s3.mode) {
+ map_gru_distributed(gru.v);
+ return;
}
+ map_high("GRU", gru.s.base, shift, shift, max_pnode, map_wb);
+ gru_start_paddr = ((u64)gru.s.base << shift);
+ gru_end_paddr = gru_start_paddr + (1UL << shift) * (max_pnode + 1);
}
static __init void map_mmr_high(int max_pnode)
next prev parent reply other threads:[~2013-05-28 13:41 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-23 15:50 [PATCH] x86/UV: GRU distributed mode mappings Dimitri Sivanich
2013-05-28 7:59 ` Ingo Molnar
2013-05-28 13:41 ` Dimitri Sivanich [this message]
2013-05-29 8:15 ` Ingo Molnar
2013-05-29 15:56 ` Dimitri Sivanich
2013-05-31 12:26 ` [tip:x86/uv] x86/UV: Add " tip-bot for Dimitri Sivanich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130528134106.GA5619@sgi.com \
--to=sivanich@sgi.com \
--cc=agordeev@redhat.com \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@kernel.org \
--cc=mingo@redhat.com \
--cc=rja@sgi.com \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
--cc=travis@sgi.com \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).