[PATCH V3] mfd: replace strict_strtoul() with kstrtoul()

[PATCH V3] mfd: replace strict_strtoul() with kstrtoul()

[Jingoo Han]

The usage of strict_strtoul() is not preferred, because
strict_strtoul() is obsolete. Thus, kstrtoul() should be
used.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
Changes since v1:
- Removed redundant variables 'u8 reg'.
- Changed the type of 'user_value' from 'unsigned long' to 'u8'.
- Replaced kstrtoul() with kstrtou8() to handle u8 variable.
- Added Andy Shevchenko's Reviewed-by.

Changes since v1:
- Used return code from kstrtoul().
- Changed the type of 'user_reg' from 'unsigned long' to 'u8'.
- Replaced kstrtoul() with kstrtou8() to handle u8 variable.

 drivers/mfd/aat2870-core.c   |    5 +++--
 drivers/mfd/ab3100-core.c    |   28 ++++++++++------------------
 drivers/mfd/ab8500-debugfs.c |    2 +-
 3 files changed, 14 insertions(+), 21 deletions(-)

diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c
index dfdb0a2..d4f5945 100644
--- a/drivers/mfd/aat2870-core.c
+++ b/drivers/mfd/aat2870-core.c
@@ -312,8 +312,9 @@ static ssize_t aat2870_reg_write_file(struct file *file,
 	while (*start == ' ')
 		start++;
 
-	if (strict_strtoul(start, 16, &val))
-		return -EINVAL;
+	ret = kstrtoul(start, 16, &val);
+	if (ret)
+		return ret;
 
 	ret = aat2870->write(aat2870, (u8)addr, (u8)val);
 	if (ret)
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index a9bb140..ddc669d 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -491,7 +491,7 @@ static ssize_t ab3100_get_set_reg(struct file *file,
 	char buf[32];
 	ssize_t buf_size;
 	int regp;
-	unsigned long user_reg;
+	u8 user_reg;
 	int err;
 	int i = 0;
 
@@ -514,34 +514,29 @@ static ssize_t ab3100_get_set_reg(struct file *file,
 	/*
 	 * Advance pointer to end of string then terminate
 	 * the register string. This is needed to satisfy
-	 * the strict_strtoul() function.
+	 * the kstrtou8() function.
 	 */
 	while ((i < buf_size) && (buf[i] != ' '))
 		i++;
 	buf[i] = '\0';
 
-	err = strict_strtoul(&buf[regp], 16, &user_reg);
+	err = kstrtou8(&buf[regp], 16, &user_reg);
 	if (err)
 		return err;
-	if (user_reg > 0xff)
-		return -EINVAL;
 
 	/* Either we read or we write a register here */
 	if (!priv->mode) {
 		/* Reading */
-		u8 reg = (u8) user_reg;
 		u8 regvalue;
 
-		ab3100_get_register_interruptible(ab3100, reg, &regvalue);
+		ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
 
 		dev_info(ab3100->dev,
 			 "debug read AB3100 reg[0x%02x]: 0x%02x\n",
-			 reg, regvalue);
+			 user_reg, regvalue);
 	} else {
 		int valp;
-		unsigned long user_value;
-		u8 reg = (u8) user_reg;
-		u8 value;
+		u8 user_value;
 		u8 regvalue;
 
 		/*
@@ -557,20 +552,17 @@ static ssize_t ab3100_get_set_reg(struct file *file,
 			i++;
 		buf[i] = '\0';
 
-		err = strict_strtoul(&buf[valp], 16, &user_value);
+		err = kstrtou8(&buf[valp], 16, &user_value);
 		if (err)
 			return err;
-		if (user_reg > 0xff)
-			return -EINVAL;
 
-		value = (u8) user_value;
-		ab3100_set_register_interruptible(ab3100, reg, value);
-		ab3100_get_register_interruptible(ab3100, reg, &regvalue);
+		ab3100_set_register_interruptible(ab3100, user_reg, user_value);
+		ab3100_get_register_interruptible(ab3100, user_reg, &regvalue);
 
 		dev_info(ab3100->dev,
 			 "debug write reg[0x%02x] with 0x%02x, "
 			 "after readback: 0x%02x\n",
-			 reg, value, regvalue);
+			 user_reg, user_value, regvalue);
 	}
 	return buf_size;
 }
diff --git a/drivers/mfd/ab8500-debugfs.c b/drivers/mfd/ab8500-debugfs.c
index 37b7ce4..11656c2 100644
--- a/drivers/mfd/ab8500-debugfs.c
+++ b/drivers/mfd/ab8500-debugfs.c
@@ -2757,7 +2757,7 @@ static ssize_t show_irq(struct device *dev,
 	unsigned int irq_index;
 	int err;
 
-	err = strict_strtoul(attr->attr.name, 0, &name);
+	err = kstrtoul(attr->attr.name, 0, &name);
 	if (err)
 		return err;
 
-- 
1.7.10.4

Re: [PATCH V3] mfd: replace strict_strtoul() with kstrtoul()

[Lee Jones]

On Tue, 04 Jun 2013, Jingoo Han wrote:

> The usage of strict_strtoul() is not preferred, because
> strict_strtoul() is obsolete. Thus, kstrtoul() should be
> used.
> 
> Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
> Changes since v1:
> - Removed redundant variables 'u8 reg'.
> - Changed the type of 'user_value' from 'unsigned long' to 'u8'.
> - Replaced kstrtoul() with kstrtou8() to handle u8 variable.
> - Added Andy Shevchenko's Reviewed-by.
> 
> Changes since v1:
> - Used return code from kstrtoul().
> - Changed the type of 'user_reg' from 'unsigned long' to 'u8'.
> - Replaced kstrtoul() with kstrtou8() to handle u8 variable.
> 
>  drivers/mfd/aat2870-core.c   |    5 +++--
>  drivers/mfd/ab3100-core.c    |   28 ++++++++++------------------
>  drivers/mfd/ab8500-debugfs.c |    2 +-
>  3 files changed, 14 insertions(+), 21 deletions(-)

Applied.

If Andy has any further comments, I'll replace the applied version
with any v3 patch which you send.

-- 
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog