From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: "Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, "Neil Horman" <nhorman@tuxdriver.com>,
"Prarit Bhargava" <prarit@redhat.com>,
"Don Zickus" <dzickus@redhat.com>,
"Don Dutile" <ddutile@redhat.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Asit Mallick" <asit.k.mallick@intel.com>,
"David Woodhouse" <dwmw2@infradead.org>,
"Joerg Roedel" <joro@8bytes.org>,
"Konrad Rzeszutek Wilk" <konrad.wilk@oracle.com>,
"Arkadiusz Miśkiewicz" <arekm@maven.pl>,
linux-pci@vger.kernel.org
Subject: [ 16/26] iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets
Date: Mon, 1 Jul 2013 13:10:11 -0700 [thread overview]
Message-ID: <20130701200731.731148871@linuxfoundation.org> (raw)
In-Reply-To: <20130701200729.872850414@linuxfoundation.org>
3.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Neil Horman <nhorman@tuxdriver.com>
commit 03bbcb2e7e292838bb0244f5a7816d194c911d62 upstream.
A few years back intel published a spec update:
http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf
For the 5520 and 5500 chipsets which contained an errata (specificially errata
53), which noted that these chipsets can't properly do interrupt remapping, and
as a result the recommend that interrupt remapping be disabled in bios. While
many vendors have a bios update to do exactly that, not all do, and of course
not all users update their bios to a level that corrects the problem. As a
result, occasionally interrupts can arrive at a cpu even after affinity for that
interrupt has be moved, leading to lost or spurrious interrupts (usually
characterized by the message:
kernel: do_IRQ: 7.71 No irq handler for vector (irq -1)
There have been several incidents recently of people seeing this error, and
investigation has shown that they have system for which their BIOS level is such
that this feature was not properly turned off. As such, it would be good to
give them a reminder that their systems are vulnurable to this problem. For
details of those that reported the problem, please see:
https://bugzilla.redhat.com/show_bug.cgi?id=887006
[ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ]
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Prarit Bhargava <prarit@redhat.com>
CC: Don Zickus <dzickus@redhat.com>
CC: Don Dutile <ddutile@redhat.com>
CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Asit Mallick <asit.k.mallick@intel.com>
CC: David Woodhouse <dwmw2@infradead.org>
CC: linux-pci@vger.kernel.org
CC: Joerg Roedel <joro@8bytes.org>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Arkadiusz Miśkiewicz <arekm@maven.pl>
Signed-off-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/x86/include/asm/irq_remapping.h | 3 +++
arch/x86/kernel/early-quirks.c | 20 ++++++++++++++++++++
drivers/iommu/intel_irq_remapping.c | 10 ++++++++++
drivers/iommu/irq_remapping.c | 6 ++++++
drivers/iommu/irq_remapping.h | 2 ++
5 files changed, 41 insertions(+)
--- a/arch/x86/include/asm/irq_remapping.h
+++ b/arch/x86/include/asm/irq_remapping.h
@@ -23,11 +23,13 @@
#define __X86_IRQ_REMAPPING_H
#include <asm/io_apic.h>
+#include <linux/irq.h>
#ifdef CONFIG_IRQ_REMAP
extern void setup_irq_remapping_ops(void);
extern int irq_remapping_supported(void);
+extern void set_irq_remapping_broken(void);
extern int irq_remapping_prepare(void);
extern int irq_remapping_enable(void);
extern void irq_remapping_disable(void);
@@ -54,6 +56,7 @@ void irq_remap_modify_chip_defaults(stru
static inline void setup_irq_remapping_ops(void) { }
static inline int irq_remapping_supported(void) { return 0; }
+static inline void set_irq_remapping_broken(void) { }
static inline int irq_remapping_prepare(void) { return -ENODEV; }
static inline int irq_remapping_enable(void) { return -ENODEV; }
static inline void irq_remapping_disable(void) { }
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -18,6 +18,7 @@
#include <asm/apic.h>
#include <asm/iommu.h>
#include <asm/gart.h>
+#include <asm/irq_remapping.h>
static void __init fix_hypertransport_config(int num, int slot, int func)
{
@@ -192,6 +193,21 @@ static void __init ati_bugs_contd(int nu
}
#endif
+static void __init intel_remapping_check(int num, int slot, int func)
+{
+ u8 revision;
+
+ revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID);
+
+ /*
+ * Revision 0x13 of this chipset supports irq remapping
+ * but has an erratum that breaks its behavior, flag it as such
+ */
+ if (revision == 0x13)
+ set_irq_remapping_broken();
+
+}
+
#define QFLAG_APPLY_ONCE 0x1
#define QFLAG_APPLIED 0x2
#define QFLAG_DONE (QFLAG_APPLY_ONCE|QFLAG_APPLIED)
@@ -221,6 +237,10 @@ static struct chipset early_qrk[] __init
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs },
{ PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS,
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
+ { PCI_VENDOR_ID_INTEL, 0x3403, PCI_CLASS_BRIDGE_HOST,
+ PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
+ { PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
+ PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
{}
};
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -524,6 +524,16 @@ static int __init intel_irq_remapping_su
if (disable_irq_remap)
return 0;
+ if (irq_remap_broken) {
+ WARN_TAINT(1, TAINT_FIRMWARE_WORKAROUND,
+ "This system BIOS has enabled interrupt remapping\n"
+ "on a chipset that contains an erratum making that\n"
+ "feature unstable. To maintain system stability\n"
+ "interrupt remapping is being disabled. Please\n"
+ "contact your BIOS vendor for an update\n");
+ disable_irq_remap = 1;
+ return 0;
+ }
if (!dmar_ir_support())
return 0;
--- a/drivers/iommu/irq_remapping.c
+++ b/drivers/iommu/irq_remapping.c
@@ -18,6 +18,7 @@
int irq_remapping_enabled;
int disable_irq_remap;
+int irq_remap_broken;
int disable_sourceid_checking;
int no_x2apic_optout;
@@ -210,6 +211,11 @@ void __init setup_irq_remapping_ops(void
#endif
}
+void set_irq_remapping_broken(void)
+{
+ irq_remap_broken = 1;
+}
+
int irq_remapping_supported(void)
{
if (disable_irq_remap)
--- a/drivers/iommu/irq_remapping.h
+++ b/drivers/iommu/irq_remapping.h
@@ -32,6 +32,7 @@ struct pci_dev;
struct msi_msg;
extern int disable_irq_remap;
+extern int irq_remap_broken;
extern int disable_sourceid_checking;
extern int no_x2apic_optout;
extern int irq_remapping_enabled;
@@ -89,6 +90,7 @@ extern struct irq_remap_ops amd_iommu_ir
#define irq_remapping_enabled 0
#define disable_irq_remap 1
+#define irq_remap_broken 0
#endif /* CONFIG_IRQ_REMAP */
next prev parent reply other threads:[~2013-07-01 20:20 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-01 20:09 [ 00/26] 3.9.9-stable review Greg Kroah-Hartman
2013-07-01 20:09 ` [ 01/26] s390/ipl: Fix FCP WWPN and LUN format strings for read Greg Kroah-Hartman
2013-07-01 20:09 ` [ 02/26] ARM: 7755/1: handle user space mapped pages in flush_kernel_dcache_page Greg Kroah-Hartman
2013-07-01 20:09 ` [ 03/26] ARM: 7772/1: Fix missing flush_kernel_dcache_page() for noMMU Greg Kroah-Hartman
2013-07-01 20:09 ` [ 04/26] Bluetooth: Fix crash in l2cap_build_cmd() with small MTU Greg Kroah-Hartman
2013-07-01 20:10 ` [ 05/26] Bluetooth: Fix invalid length check in l2cap_information_rsp() Greg Kroah-Hartman
2013-07-01 20:10 ` [ 06/26] hw_breakpoint: Fix cpu check in task_bp_pinned(cpu) Greg Kroah-Hartman
2013-07-01 20:10 ` [ 07/26] hw_breakpoint: Use cpu_possible_mask in {reserve,release}_bp_slot() Greg Kroah-Hartman
2013-07-01 20:10 ` [ 08/26] ath9k_htc: Handle IDLE state transition properly Greg Kroah-Hartman
2013-07-01 20:10 ` [ 09/26] iwlwifi: dvm: fix chain noise calibration Greg Kroah-Hartman
2013-07-01 20:10 ` [ 10/26] s390/pci: Implement IRQ functions if !PCI Greg Kroah-Hartman
2013-07-01 20:10 ` [ 11/26] s390/irq: Only define synchronize_irq() on SMP Greg Kroah-Hartman
2013-07-01 20:10 ` [ 12/26] dlci: acquire rtnl_lock before calling __dev_get_by_name() Greg Kroah-Hartman
2013-07-01 20:10 ` [ 13/26] dlci: validate the net device in dlci_del() Greg Kroah-Hartman
2013-07-01 20:10 ` [ 14/26] net/tg3: Avoid delay during MMIO access Greg Kroah-Hartman
2013-07-01 20:10 ` [ 15/26] rt2800: fix RT5390 & RT3290 TX power settings regression Greg Kroah-Hartman
2013-07-01 20:10 ` Greg Kroah-Hartman [this message]
2013-07-01 20:10 ` [ 17/26] perf: Disable monitoring on setuid processes for regular users Greg Kroah-Hartman
2013-07-01 20:10 ` [ 18/26] crypto: algboss - Hold ref count on larval Greg Kroah-Hartman
2013-07-01 20:10 ` [ 19/26] powerpc/eeh: Fix fetching bus for single-dev-PE Greg Kroah-Hartman
2013-07-01 20:10 ` [ 20/26] UBIFS: prepare to fix a horrid bug Greg Kroah-Hartman
2013-07-01 20:10 ` [ 21/26] UBIFS: " Greg Kroah-Hartman
2013-07-01 20:10 ` [ 22/26] libata-acpi: add back ACPI based hotplug functionality Greg Kroah-Hartman
2013-07-01 20:10 ` [ 23/26] of/base: release the node correctly in of_parse_phandle_with_args() Greg Kroah-Hartman
2013-07-01 20:10 ` [ 24/26] can: usb_8dev: unregister netdev before free()ing Greg Kroah-Hartman
2013-07-01 20:10 ` [ 25/26] mac80211: work around broken APs not including HT info Greg Kroah-Hartman
2013-07-01 20:10 ` [ 26/26] netfilter: nf_conntrack_ipv6: Plug sk_buff leak in fragment handling Greg Kroah-Hartman
2013-07-02 18:31 ` [ 00/26] 3.9.9-stable review Guenter Roeck
2013-07-02 18:57 ` Greg Kroah-Hartman
2013-07-02 18:47 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130701200731.731148871@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=arekm@maven.pl \
--cc=asit.k.mallick@intel.com \
--cc=bhelgaas@google.com \
--cc=ddutile@redhat.com \
--cc=dwmw2@infradead.org \
--cc=dzickus@redhat.com \
--cc=joro@8bytes.org \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
--cc=prarit@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).