[PATCH 0/8] ARM: SoC specific bug fixes

[PATCH 0/8] ARM: SoC specific bug fixes

[Arnd Bergmann]

Hi everyone,

This is a set of bug fixes that came up during build testing.

I have applied them to the fixes branch for now and will send
them to Linus next week unless there are objections.

	Arnd

Arnd Bergmann (8):
  clocksource: armada-xp: always register local_timer_ops
  ARM: omap5: omap5 has SCU and TWD
  ARM: zynq: use DT_MACHINE_START
  ARM: OMAP: build mach-omap code only if needed
  ARM: sti: move DEBUG_STI_UART into alphabetical order
  ARM: OMAP: omap_common_late_init may be unused
  ARM: ixp4xx: avoid circular header dependency
  ARM: exynos: select PM_GENERIC_DOMAINS only when used

 arch/arm/Kconfig.debug                    |  20 ++--
 arch/arm/configs/omap2plus_defconfig      |   4 +
 arch/arm/mach-exynos/Kconfig              |   2 +-
 arch/arm/mach-ixp4xx/include/mach/timex.h |   2 +-
 arch/arm/mach-omap2/Kconfig               | 150 +++++++++++++++---------------
 arch/arm/mach-omap2/io.c                  |   2 +-
 arch/arm/mach-zynq/common.c               |   2 +-
 drivers/clocksource/time-armada-370-xp.c  |   2 -
 8 files changed, 94 insertions(+), 90 deletions(-)

Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Tony Lindgren <tony@atomide.com>

-- 
1.8.3.1

[PATCH 1/8] clocksource: armada-xp: always register local_timer_ops

[Arnd Bergmann]

The call to local_timer_register is hidden behind an #ifdef, which
turns the armada_370_xp_local_timer_ops into a potentially unused
variable, causing this warning:

time-armada-370-xp.c:208:31: warning: 'armada_370_xp_local_timer_ops' defined but not used [-Wunused-variable]
 static struct local_timer_ops armada_370_xp_local_timer_ops __cpuinitdata = {
                               ^

Since local_timer_register() itself doesn't do anything, just removing
the #ifdef makes the code look nicer and gets rid of the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
 drivers/clocksource/time-armada-370-xp.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
index 47a6730..4cd8520 100644
--- a/drivers/clocksource/time-armada-370-xp.c
+++ b/drivers/clocksource/time-armada-370-xp.c
@@ -294,8 +294,6 @@ void __init armada_370_xp_timer_init(void)
 				percpu_armada_370_xp_evt);
 	if (!res) {
 		enable_percpu_irq(armada_370_xp_clkevt.irq, 0);
-#ifdef CONFIG_LOCAL_TIMERS
 		local_timer_register(&armada_370_xp_local_timer_ops);
-#endif
 	}
 }
-- 
1.8.3.1

[PATCH 2/8] ARM: omap5: omap5 has SCU and TWD

[Arnd Bergmann]

These are selected by omap4 but used in common omap4/5
SMP code, so building an omap5-only kernel is actually
broken without this patch.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/Kconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 1fdb462..1f8127a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -110,6 +110,8 @@ config SOC_OMAP5
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
+	select HAVE_ARM_SCU if SMP
+	select HAVE_ARM_TWD if LOCAL_TIMERS
 	select HAVE_SMP
 	select COMMON_CLK
 	select HAVE_ARM_ARCH_TIMER
-- 
1.8.3.1

[PATCH 3/8] ARM: zynq: use DT_MACHINE_START

[Arnd Bergmann]

The zynq platform code only supports DT based booting, so we
should use DT_MACHINE_START rather than MACHINE_START.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Michal Simek <michal.simek@xilinx.com>
---
 arch/arm/mach-zynq/common.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 4130e65..5b799c2 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -101,7 +101,7 @@ static const char * const zynq_dt_match[] = {
 	NULL
 };
 
-MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
+DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.smp		= smp_ops(zynq_smp_ops),
 	.map_io		= zynq_map_io,
 	.init_machine	= zynq_init_machine,
-- 
1.8.3.1

[PATCH 4/8] ARM: OMAP: build mach-omap code only if needed

[Arnd Bergmann]

If we build a kernel with CONFIG_ARCH_OMAP2PLUS enabled but all of the
individual SoCs disabled, we run into a large number of link errors
because if incorrect dependencies:

arch/arm/mach-omap2/built-in.o: In function `_add_initiator_dep':
arch/arm/mach-omap2/omap_hwmod.c:691: undefined reference to `clkdm_add_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_del_initiator_dep':
arch/arm/mach-omap2/omap_hwmod.c:720: undefined reference to `clkdm_del_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_enable':
arch/arm/mach-omap2/omap_hwmod.c:2145: undefined reference to `clkdm_in_hwsup'
arch/arm/mach-omap2/omap_hwmod.c:2147: undefined reference to `clkdm_hwmod_enable'
arch/arm/mach-omap2/omap_hwmod.c:2191: undefined reference to `clkdm_hwmod_disable'
arch/arm/mach-omap2/omap_hwmod.c:2146: undefined reference to `clkdm_missing_idle_reporting' arch/arm/mach-omap2/built-in.o: In function `_idle':
arch/arm/mach-omap2/omap_hwmod.c:2235: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `_shutdown':
arch/arm/mach-omap2/omap_hwmod.c:2338: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count':
arch/arm/mach-omap2/omap_hwmod.c:4071: undefined reference to `pwrdm_get_context_loss_count' arch/arm/mach-omap2/built-in.o: In function `omap_pm_clkdms_setup':
arch/arm/mach-omap2/pm.c:114: undefined reference to `clkdm_allow_idle'
arch/arm/mach-omap2/pm.c:117: undefined reference to `clkdm_sleep' arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_late_init':
arch/arm/mach-omap2/pm.c:294: undefined reference to `omap_voltage_late_init' arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init':
arch/arm/mach-omap2/gpio.c:133: undefined reference to `pwrdm_can_ever_lose_context'

We can avoid this if we make CONFIG_ARCH_OMAP2PLUS a silent option that
gets enabled any time that one of the SoC versions is enabled.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/configs/omap2plus_defconfig |   4 +
 arch/arm/mach-omap2/Kconfig          | 148 +++++++++++++++++------------------
 2 files changed, 78 insertions(+), 74 deletions(-)

diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 2ac0ffb..f9b7fcc 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -22,6 +22,10 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MULTI_V6=y
 CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_ARCH_OMAP2=y
+CONFIG_ARCH_OMAP3=y
+CONFIG_ARCH_OMAP4=y
+CONFIG_SOC_AM33XX=y
 CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_ARCH_VEXPRESS_CA9X4=y
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 1f8127a..5c14051 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -1,62 +1,10 @@
 config ARCH_OMAP
 	bool
 
-config ARCH_OMAP2PLUS
-	bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
-	select ARCH_HAS_CPUFREQ
-	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_OMAP
-	select ARCH_REQUIRE_GPIOLIB
-	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
-	select GENERIC_CLOCKEVENTS
-	select GENERIC_IRQ_CHIP
-	select HAVE_CLK
-	select OMAP_DM_TIMER
-	select PINCTRL
-	select PROC_DEVICETREE if PROC_FS
-	select SOC_BUS
-	select SPARSE_IRQ
-	select TI_PRIV_EDMA
-	select USE_OF
-	help
-	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
-
-
-if ARCH_OMAP2PLUS
-
-menu "TI OMAP2/3/4 Specific Features"
-
-config ARCH_OMAP2PLUS_TYPICAL
-	bool "Typical OMAP configuration"
-	default y
-	select AEABI
-	select HIGHMEM
-	select I2C
-	select I2C_OMAP
-	select MENELAUS if ARCH_OMAP2
-	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
-	select PM_RUNTIME
-	select REGULATOR
-	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
-	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
-	select VFP
-	help
-	  Compile a kernel suitable for booting most boards
-
-config SOC_HAS_OMAP2_SDRC
-	bool "OMAP2 SDRAM Controller support"
-
-config SOC_HAS_REALTIME_COUNTER
-	bool "Real time free running counter"
-	depends on SOC_OMAP5
-	default y
-
 config ARCH_OMAP2
 	bool "TI OMAP2"
-	depends on ARCH_OMAP2PLUS
 	depends on ARCH_MULTI_V6
-	default y
+	select ARCH_OMAP2PLUS
 	select CPU_V6
 	select MULTI_IRQ_HANDLER
 	select SOC_HAS_OMAP2_SDRC
@@ -64,9 +12,8 @@ config ARCH_OMAP2
 
 config ARCH_OMAP3
 	bool "TI OMAP3"
-	depends on ARCH_OMAP2PLUS
 	depends on ARCH_MULTI_V7
-	default y
+	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
@@ -80,9 +27,8 @@ config ARCH_OMAP3
 
 config ARCH_OMAP4
 	bool "TI OMAP4"
-	default y
-	depends on ARCH_OMAP2PLUS
 	depends on ARCH_MULTI_V7
+	select ARCH_OMAP2PLUS
 	select ARCH_HAS_OPP
 	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 	select ARM_CPU_SUSPEND if PM
@@ -107,6 +53,7 @@ config ARCH_OMAP4
 config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
+	select ARCH_OMAP2PLUS
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
@@ -116,6 +63,76 @@ config SOC_OMAP5
 	select COMMON_CLK
 	select HAVE_ARM_ARCH_TIMER
 
+config SOC_AM33XX
+	bool "AM33XX support"
+	depends on ARCH_MULTI_V7
+	select ARCH_OMAP2PLUS
+	select ARM_CPU_SUSPEND if PM
+	select CPU_V7
+	select MULTI_IRQ_HANDLER
+	select COMMON_CLK
+
+config SOC_AM43XX
+	bool "TI AM43x"
+	depends on ARCH_MULTI_V7
+	select CPU_V7
+	select ARCH_OMAP2PLUS
+	select MULTI_IRQ_HANDLER
+	select ARM_GIC
+	select COMMON_CLK
+	select MACH_OMAP_GENERIC
+
+config ARCH_OMAP2PLUS
+	bool
+	select ARCH_HAS_BANDGAP
+	select ARCH_HAS_CPUFREQ
+	select ARCH_HAS_HOLES_MEMORYMODEL
+	select ARCH_OMAP
+	select ARCH_REQUIRE_GPIOLIB
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select HAVE_CLK
+	select OMAP_DM_TIMER
+	select PINCTRL
+	select PROC_DEVICETREE if PROC_FS
+	select SOC_BUS
+	select SPARSE_IRQ
+	select USE_OF
+	help
+	  Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
+
+
+if ARCH_OMAP2PLUS
+
+menu "TI OMAP2/3/4 Specific Features"
+
+config ARCH_OMAP2PLUS_TYPICAL
+	bool "Typical OMAP configuration"
+	default y
+	select AEABI
+	select HIGHMEM
+	select I2C
+	select I2C_OMAP
+	select MENELAUS if ARCH_OMAP2
+	select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
+	select PM_RUNTIME
+	select REGULATOR
+	select TWL4030_CORE if ARCH_OMAP3 || ARCH_OMAP4
+	select TWL4030_POWER if ARCH_OMAP3 || ARCH_OMAP4
+	select VFP
+	help
+	  Compile a kernel suitable for booting most boards
+
+config SOC_HAS_OMAP2_SDRC
+	bool "OMAP2 SDRAM Controller support"
+
+config SOC_HAS_REALTIME_COUNTER
+	bool "Real time free running counter"
+	depends on SOC_OMAP5
+	default y
+
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
 
@@ -143,23 +160,6 @@ config SOC_TI81XX
 	depends on ARCH_OMAP3
 	default y
 
-config SOC_AM33XX
-	bool "AM33XX support"
-	depends on ARCH_MULTI_V7
-	default y
-	select ARM_CPU_SUSPEND if PM
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
-	select COMMON_CLK
-
-config SOC_AM43XX
-	bool "TI AM43x"
-	select CPU_V7
-	select MULTI_IRQ_HANDLER
-	select ARM_GIC
-	select COMMON_CLK
-	select MACH_OMAP_GENERIC
-
 config OMAP_PACKAGE_ZAF
        bool
 
-- 
1.8.3.1

[PATCH 5/8] ARM: sti: move DEBUG_STI_UART into alphabetical order

[Arnd Bergmann]

This was accidentally added in the wrong place, messing
up the ordering of the file.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/Kconfig.debug | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 77c1411..ff4920b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -510,6 +510,16 @@ choice
 		  Say Y here if you want the debug print routines to direct
 		  their output to the uart1 port on SiRFmarco devices.
 
+	config DEBUG_STI_UART
+		depends on ARCH_STI
+		bool "Use StiH415/416 ASC for low-level debug"
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on StiH415/416 based platforms like B2000, B2020.
+		  It support UART2 and SBC_UART1.
+
+		  If unsure, say N.
+
 	config DEBUG_U300_UART
 		bool "Kernel low-level debugging messages via U300 UART0"
 		depends on ARCH_U300
@@ -557,16 +567,6 @@ choice
 		  This option selects UART0 on VIA/Wondermedia System-on-a-chip
 		  devices, including VT8500, WM8505, WM8650 and WM8850.
 
-	config DEBUG_STI_UART
-		depends on ARCH_STI
-		bool "Use StiH415/416 ASC for low-level debug"
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on StiH415/416 based platforms like B2000, B2020.
-		  It support UART2 and SBC_UART1.
-
-		  If unsure, say N.
-
 	config DEBUG_LL_UART_NONE
 		bool "No low-level debugging UART"
 		depends on !ARCH_MULTIPLATFORM
-- 
1.8.3.1

[PATCH 6/8] ARM: OMAP: omap_common_late_init may be unused

[Arnd Bergmann]

Some OMAP SoCs use this function while others do not, and that
causes a warning when building multi_v7_defconfig. Marking the
function __maybe_unused silences the harmless warning without the
need to add complex #ifdef logic.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/io.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index fe3253a..4a3f06f 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -394,7 +394,7 @@ static void __init omap_hwmod_init_postsetup(void)
 	omap_pm_if_early_init();
 }
 
-static void __init omap_common_late_init(void)
+static void __init __maybe_unused omap_common_late_init(void)
 {
 	omap_mux_late_init();
 	omap2_common_pm_late_init();
-- 
1.8.3.1

[PATCH 7/8] ARM: ixp4xx: avoid circular header dependency

[Arnd Bergmann]

With the new linux/reboot.h header file dependency added, we can no
longer build ixp4xx. The easiest way to avoid that is to remove the
inclusion of mach/hardware.h from mach/timex.h, which does not need
that header anyway.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: Jason Cooper <jason@lakedaemon.net>
---
 arch/arm/mach-ixp4xx/include/mach/timex.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
index c9e930f..0396d89 100644
--- a/arch/arm/mach-ixp4xx/include/mach/timex.h
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -3,7 +3,7 @@
  * 
  */
 
-#include <mach/hardware.h>
+#include <mach/ixp4xx-regs.h>
 
 /*
  * We use IXP425 General purpose timer for our timer needs, it runs at 
-- 
1.8.3.1

[PATCH 8/8] ARM: exynos: select PM_GENERIC_DOMAINS only when used

[Arnd Bergmann]

This fixes building exynos kernels with CONFIG_PM disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kukjin Kim <kgene.kim@samsung.com>
---
 arch/arm/mach-exynos/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 2d503b3..ba70a84 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -38,7 +38,7 @@ config CPU_EXYNOS4210
 	depends on ARCH_EXYNOS4
 	select ARM_CPU_SUSPEND if PM
 	select PINCTRL_EXYNOS
-	select PM_GENERIC_DOMAINS
+	select PM_GENERIC_DOMAINS if PM
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
-- 
1.8.3.1

Re: [PATCH 1/8] clocksource: armada-xp: always register local_timer_ops

[Gregory CLEMENT]

On 07/05/2013 06:23 PM, Arnd Bergmann wrote:
> The call to local_timer_register is hidden behind an #ifdef, which
> turns the armada_370_xp_local_timer_ops into a potentially unused
> variable, causing this warning:
> 
> time-armada-370-xp.c:208:31: warning: 'armada_370_xp_local_timer_ops' defined but not used [-Wunused-variable]
>  static struct local_timer_ops armada_370_xp_local_timer_ops __cpuinitdata = {
>                                ^
> 
> Since local_timer_register() itself doesn't do anything, just removing
> the #ifdef makes the code look nicer and gets rid of the warning.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Acked-by: Jason Cooper <jason@lakedaemon.net>
> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
> ---
>  drivers/clocksource/time-armada-370-xp.c | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
> index 47a6730..4cd8520 100644
> --- a/drivers/clocksource/time-armada-370-xp.c
> +++ b/drivers/clocksource/time-armada-370-xp.c
> @@ -294,8 +294,6 @@ void __init armada_370_xp_timer_init(void)
>  				percpu_armada_370_xp_evt);
>  	if (!res) {
>  		enable_percpu_irq(armada_370_xp_clkevt.irq, 0);
> -#ifdef CONFIG_LOCAL_TIMERS
>  		local_timer_register(&armada_370_xp_local_timer_ops);
> -#endif
>  	}
>  }
> 

I thought this issue was kind of fixed by the patch
"clocksource: time-armada-370-xp: Divorce from local timer API" from Stephen Boyd.

But I can't find it in linux-next so maybe it has not been pulled, so in this case
you can also add my
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

Re: [PATCH 1/8] clocksource: armada-xp: always register local_timer_ops

[Stephen Boyd]

On 07/05, Gregory CLEMENT wrote:
> On 07/05/2013 06:23 PM, Arnd Bergmann wrote:
> > The call to local_timer_register is hidden behind an #ifdef, which
> > turns the armada_370_xp_local_timer_ops into a potentially unused
> > variable, causing this warning:
> > 
> > time-armada-370-xp.c:208:31: warning: 'armada_370_xp_local_timer_ops' defined but not used [-Wunused-variable]
> >  static struct local_timer_ops armada_370_xp_local_timer_ops __cpuinitdata = {
> >                                ^
> > 
> > Since local_timer_register() itself doesn't do anything, just removing
> > the #ifdef makes the code look nicer and gets rid of the warning.
> > 
> > Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> > Acked-by: Jason Cooper <jason@lakedaemon.net>
> > Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
> > ---
> >  drivers/clocksource/time-armada-370-xp.c | 2 --
> >  1 file changed, 2 deletions(-)
> > 
> > diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c
> > index 47a6730..4cd8520 100644
> > --- a/drivers/clocksource/time-armada-370-xp.c
> > +++ b/drivers/clocksource/time-armada-370-xp.c
> > @@ -294,8 +294,6 @@ void __init armada_370_xp_timer_init(void)
> >  				percpu_armada_370_xp_evt);
> >  	if (!res) {
> >  		enable_percpu_irq(armada_370_xp_clkevt.irq, 0);
> > -#ifdef CONFIG_LOCAL_TIMERS
> >  		local_timer_register(&armada_370_xp_local_timer_ops);
> > -#endif
> >  	}
> >  }
> > 
> 
> I thought this issue was kind of fixed by the patch
> "clocksource: time-armada-370-xp: Divorce from local timer API" from Stephen Boyd.
> 
> But I can't find it in linux-next so maybe it has not been pulled, so in this case
> you can also add my
> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
> 

The pull request is blocked on Thomas responding about
timers/core being a stable branch. We may just have to wait until
timers/core goes in before Arnd and Olof can take it in.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation

Re: [PATCH 7/8] ARM: ixp4xx: avoid circular header dependency

[Krzysztof Halasa]

Arnd Bergmann <arnd@arndb.de> writes:

> With the new linux/reboot.h header file dependency added, we can no
> longer build ixp4xx. The easiest way to avoid that is to remove the
> inclusion of mach/hardware.h from mach/timex.h, which does not need
> that header anyway.

>  arch/arm/mach-ixp4xx/include/mach/timex.h | 2 +-

Acked-by: Krzysztof Halasa <khc@pm.waw.pl>
-- 
Krzysztof Halasa

Re: [PATCH 3/8] ARM: zynq: use DT_MACHINE_START

[Michal Simek]

On 07/05/2013 06:23 PM, Arnd Bergmann wrote:
> The zynq platform code only supports DT based booting, so we
> should use DT_MACHINE_START rather than MACHINE_START.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> Cc: Michal Simek <michal.simek@xilinx.com>
> ---
>  arch/arm/mach-zynq/common.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
> index 4130e65..5b799c2 100644
> --- a/arch/arm/mach-zynq/common.c
> +++ b/arch/arm/mach-zynq/common.c
> @@ -101,7 +101,7 @@ static const char * const zynq_dt_match[] = {
>  	NULL
>  };
>  
> -MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
> +DT_MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
>  	.smp		= smp_ops(zynq_smp_ops),
>  	.map_io		= zynq_map_io,
>  	.init_machine	= zynq_init_machine,
> 

No objection at all.

Acked-by: Michal Simek <michal.simek@xilinx.com>

Thanks,
Michal

Re: [PATCH 4/8] ARM: OMAP: build mach-omap code only if needed

[Olof Johansson]

Hi,

I think this broke multi_v7_defconfig in last night's linux-next, due
to TI_PRIV_EDMA no longer being selected. Looks like you missed it
when moving the options around:

On Fri, Jul 5, 2013 at 9:23 AM, Arnd Bergmann <arnd@arndb.de> wrote:
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 1f8127a..5c14051 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -1,62 +1,10 @@
>  config ARCH_OMAP
>         bool
>
> -config ARCH_OMAP2PLUS
> -       bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
> -       select ARCH_HAS_CPUFREQ
> -       select ARCH_HAS_HOLES_MEMORYMODEL
> -       select ARCH_OMAP
> -       select ARCH_REQUIRE_GPIOLIB
> -       select CLKDEV_LOOKUP
> -       select CLKSRC_MMIO
> -       select GENERIC_CLOCKEVENTS
> -       select GENERIC_IRQ_CHIP
> -       select HAVE_CLK
> -       select OMAP_DM_TIMER
> -       select PINCTRL
> -       select PROC_DEVICETREE if PROC_FS
> -       select SOC_BUS
> -       select SPARSE_IRQ
> -       select TI_PRIV_EDMA
> -       select USE_OF
> -       help
> -         Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
[...]
> +config ARCH_OMAP2PLUS
> +       bool
> +       select ARCH_HAS_BANDGAP
> +       select ARCH_HAS_CPUFREQ
> +       select ARCH_HAS_HOLES_MEMORYMODEL
> +       select ARCH_OMAP
> +       select ARCH_REQUIRE_GPIOLIB
> +       select CLKDEV_LOOKUP
> +       select CLKSRC_MMIO
> +       select GENERIC_CLOCKEVENTS
> +       select GENERIC_IRQ_CHIP
> +       select HAVE_CLK
> +       select OMAP_DM_TIMER
> +       select PINCTRL
> +       select PROC_DEVICETREE if PROC_FS
> +       select SOC_BUS
> +       select SPARSE_IRQ
> +       select USE_OF
> +       help
> +         Systems based on OMAP2, OMAP3, OMAP4 or OMAP5


-Olof

Re: [PATCH 4/8] ARM: OMAP: build mach-omap code only if needed

[Olof Johansson]

[fixed linux-arm-kernel address]

On Mon, Jul 8, 2013 at 4:31 AM, Olof Johansson <olof@lixom.net> wrote:
> Hi,
>
> I think this broke multi_v7_defconfig in last night's linux-next, due
> to TI_PRIV_EDMA no longer being selected. Looks like you missed it
> when moving the options around:
>
> On Fri, Jul 5, 2013 at 9:23 AM, Arnd Bergmann <arnd@arndb.de> wrote:
>> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
>> index 1f8127a..5c14051 100644
>> --- a/arch/arm/mach-omap2/Kconfig
>> +++ b/arch/arm/mach-omap2/Kconfig
>> @@ -1,62 +1,10 @@
>>  config ARCH_OMAP
>>         bool
>>
>> -config ARCH_OMAP2PLUS
>> -       bool "TI OMAP2/3/4/5 SoCs with device tree support" if (ARCH_MULTI_V6 || ARCH_MULTI_V7)
>> -       select ARCH_HAS_CPUFREQ
>> -       select ARCH_HAS_HOLES_MEMORYMODEL
>> -       select ARCH_OMAP
>> -       select ARCH_REQUIRE_GPIOLIB
>> -       select CLKDEV_LOOKUP
>> -       select CLKSRC_MMIO
>> -       select GENERIC_CLOCKEVENTS
>> -       select GENERIC_IRQ_CHIP
>> -       select HAVE_CLK
>> -       select OMAP_DM_TIMER
>> -       select PINCTRL
>> -       select PROC_DEVICETREE if PROC_FS
>> -       select SOC_BUS
>> -       select SPARSE_IRQ
>> -       select TI_PRIV_EDMA
>> -       select USE_OF
>> -       help
>> -         Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
> [...]
>> +config ARCH_OMAP2PLUS
>> +       bool
>> +       select ARCH_HAS_BANDGAP
>> +       select ARCH_HAS_CPUFREQ
>> +       select ARCH_HAS_HOLES_MEMORYMODEL
>> +       select ARCH_OMAP
>> +       select ARCH_REQUIRE_GPIOLIB
>> +       select CLKDEV_LOOKUP
>> +       select CLKSRC_MMIO
>> +       select GENERIC_CLOCKEVENTS
>> +       select GENERIC_IRQ_CHIP
>> +       select HAVE_CLK
>> +       select OMAP_DM_TIMER
>> +       select PINCTRL
>> +       select PROC_DEVICETREE if PROC_FS
>> +       select SOC_BUS
>> +       select SPARSE_IRQ
>> +       select USE_OF
>> +       help
>> +         Systems based on OMAP2, OMAP3, OMAP4 or OMAP5
>
>
> -Olof

Re: [PATCH 4/8] ARM: OMAP: build mach-omap code only if needed

[Tony Lindgren]

* Arnd Bergmann <arnd@arndb.de> [130705 09:28]:
> If we build a kernel with CONFIG_ARCH_OMAP2PLUS enabled but all of the
> individual SoCs disabled, we run into a large number of link errors
> because if incorrect dependencies:
> 
> arch/arm/mach-omap2/built-in.o: In function `_add_initiator_dep':
> arch/arm/mach-omap2/omap_hwmod.c:691: undefined reference to `clkdm_add_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_del_initiator_dep':
> arch/arm/mach-omap2/omap_hwmod.c:720: undefined reference to `clkdm_del_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_enable':
> arch/arm/mach-omap2/omap_hwmod.c:2145: undefined reference to `clkdm_in_hwsup'
> arch/arm/mach-omap2/omap_hwmod.c:2147: undefined reference to `clkdm_hwmod_enable'
> arch/arm/mach-omap2/omap_hwmod.c:2191: undefined reference to `clkdm_hwmod_disable'
> arch/arm/mach-omap2/omap_hwmod.c:2146: undefined reference to `clkdm_missing_idle_reporting' arch/arm/mach-omap2/built-in.o: In function `_idle':
> arch/arm/mach-omap2/omap_hwmod.c:2235: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `_shutdown':
> arch/arm/mach-omap2/omap_hwmod.c:2338: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count':
> arch/arm/mach-omap2/omap_hwmod.c:4071: undefined reference to `pwrdm_get_context_loss_count' arch/arm/mach-omap2/built-in.o: In function `omap_pm_clkdms_setup':
> arch/arm/mach-omap2/pm.c:114: undefined reference to `clkdm_allow_idle'
> arch/arm/mach-omap2/pm.c:117: undefined reference to `clkdm_sleep' arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_late_init':
> arch/arm/mach-omap2/pm.c:294: undefined reference to `omap_voltage_late_init' arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init':
> arch/arm/mach-omap2/gpio.c:133: undefined reference to `pwrdm_can_ever_lose_context'
> 
> We can avoid this if we make CONFIG_ARCH_OMAP2PLUS a silent option that
> gets enabled any time that one of the SoC versions is enabled.
> 
> Cc: Tony Lindgren <tony@atomide.com>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Sounds like there's some issue as noted by Olof, but the
patch is good in general:

Acked-by: Tony Lindgren <tony@atomide.com>

Re: [PATCH 6/8] ARM: OMAP: omap_common_late_init may be unused

[Tony Lindgren]

* Arnd Bergmann <arnd@arndb.de> [130705 09:28]:
> Some OMAP SoCs use this function while others do not, and that
> causes a warning when building multi_v7_defconfig. Marking the
> function __maybe_unused silences the harmless warning without the
> need to add complex #ifdef logic.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Tony Lindgren <tony@atomide.com>

> ---
>  arch/arm/mach-omap2/io.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
> index fe3253a..4a3f06f 100644
> --- a/arch/arm/mach-omap2/io.c
> +++ b/arch/arm/mach-omap2/io.c
> @@ -394,7 +394,7 @@ static void __init omap_hwmod_init_postsetup(void)
>  	omap_pm_if_early_init();
>  }
>  
> -static void __init omap_common_late_init(void)
> +static void __init __maybe_unused omap_common_late_init(void)
>  {
>  	omap_mux_late_init();
>  	omap2_common_pm_late_init();
> -- 
> 1.8.3.1
> 

Re: [PATCH 2/8] ARM: omap5: omap5 has SCU and TWD

[Tony Lindgren]

* Arnd Bergmann <arnd@arndb.de> [130705 09:28]:
> These are selected by omap4 but used in common omap4/5
> SMP code, so building an omap5-only kernel is actually
> broken without this patch.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Acked-by: Tony Lindgren <tony@atomide.com>

>  arch/arm/mach-omap2/Kconfig | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
> index 1fdb462..1f8127a 100644
> --- a/arch/arm/mach-omap2/Kconfig
> +++ b/arch/arm/mach-omap2/Kconfig
> @@ -110,6 +110,8 @@ config SOC_OMAP5
>  	select ARM_CPU_SUSPEND if PM
>  	select ARM_GIC
>  	select CPU_V7
> +	select HAVE_ARM_SCU if SMP
> +	select HAVE_ARM_TWD if LOCAL_TIMERS
>  	select HAVE_SMP
>  	select COMMON_CLK
>  	select HAVE_ARM_ARCH_TIMER
> -- 
> 1.8.3.1
>