[PATCH] perf tools: Fix build errors with O and DESTDIR make vars set

[PATCH] perf tools: Fix build errors with O and DESTDIR make vars set

[Robert Richter]

From: Robert Richter <robert.richter@linaro.org>

Fixing build errors with O and DESTDIR make vars set:

 $ make prefix=/usr/local O=$builddir DESTDIR=$destdir -C tools/ perf
 ...
 make[1]: Entering directory `.../.source/perf/tools/perf'
     CC .../.build/perf/perf/util/parse-events.o
 util/parse-events.c:14:32: fatal error: parse-events-bison.h: No such file or directory
 compilation terminated.
 make[1]: *** [.../.build/perf/perf/util/parse-events.o] Error 1
 ...

and:

     LINK /.../.build/perf/perf/perf
 gcc: error: /.../.build/perf/perf//.../.source/perf/tools/lib/lk/liblk.a: No such file or directory

Cc: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
---
 tools/perf/Makefile        | 5 ++---
 tools/perf/config/Makefile | 2 +-
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 203cb0e..641fccd 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -121,17 +121,16 @@ SCRIPT_SH += perf-archive.sh
 grep-libs = $(filter -l%,$(1))
 strip-libs = $(filter-out -l%,$(1))
 
-LK_PATH=$(LK_DIR)
-
 ifneq ($(OUTPUT),)
   TE_PATH=$(OUTPUT)
 ifneq ($(subdir),)
-  LK_PATH=$(OUTPUT)$(LK_DIR)
+  LK_PATH=$(objtree)/lib/lk/
 else
   LK_PATH=$(OUTPUT)
 endif
 else
   TE_PATH=$(TRACE_EVENT_DIR)
+  LK_PATH=$(LK_DIR)
 endif
 
 LIBTRACEEVENT = $(TE_PATH)libtraceevent.a
diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile
index f139dcd..f446895 100644
--- a/tools/perf/config/Makefile
+++ b/tools/perf/config/Makefile
@@ -39,7 +39,7 @@ src-perf := $(srctree)/tools/perf
 endif
 
 ifeq ($(obj-perf),)
-obj-perf := $(objtree)
+obj-perf := $(OUTPUT)
 endif
 
 ifneq ($(obj-perf),)
-- 
1.8.1.1

[tip:perf/urgent] perf tools: Fix build errors with O and DESTDIR make vars set

[tip-bot for Robert Richter]

Commit-ID:  107de3724eff5a6fa6474a4d2aa5460b63749ebf
Gitweb:     http://git.kernel.org/tip/107de3724eff5a6fa6474a4d2aa5460b63749ebf
Author:     Robert Richter <robert.richter@linaro.org>
AuthorDate: Tue, 11 Jun 2013 17:22:38 +0200
Committer:  Arnaldo Carvalho de Melo <acme@redhat.com>
CommitDate: Mon, 8 Jul 2013 17:34:00 -0300

perf tools: Fix build errors with O and DESTDIR make vars set

Fixing build errors with O and DESTDIR make vars set:

 $ make prefix=/usr/local O=$builddir DESTDIR=$destdir -C tools/ perf
 ...
 make[1]: Entering directory `.../.source/perf/tools/perf'
     CC .../.build/perf/perf/util/parse-events.o
 util/parse-events.c:14:32: fatal error: parse-events-bison.h: No such file or directory
 compilation terminated.
 make[1]: *** [.../.build/perf/perf/util/parse-events.o] Error 1
 ...

and:

     LINK /.../.build/perf/perf/perf
 gcc: error: /.../.build/perf/perf//.../.source/perf/tools/lib/lk/liblk.a: No such file or directory

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Robert Richter <rric@kernel.org>
Link: http://lkml.kernel.org/r/1370964158-4135-1-git-send-email-rric@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/Makefile        | 5 ++---
 tools/perf/config/Makefile | 2 +-
 2 files changed, 3 insertions(+), 4 deletions(-)

diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 203cb0e..641fccd 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -121,17 +121,16 @@ SCRIPT_SH += perf-archive.sh
 grep-libs = $(filter -l%,$(1))
 strip-libs = $(filter-out -l%,$(1))
 
-LK_PATH=$(LK_DIR)
-
 ifneq ($(OUTPUT),)
   TE_PATH=$(OUTPUT)
 ifneq ($(subdir),)
-  LK_PATH=$(OUTPUT)$(LK_DIR)
+  LK_PATH=$(objtree)/lib/lk/
 else
   LK_PATH=$(OUTPUT)
 endif
 else
   TE_PATH=$(TRACE_EVENT_DIR)
+  LK_PATH=$(LK_DIR)
 endif
 
 LIBTRACEEVENT = $(TE_PATH)libtraceevent.a
diff --git a/tools/perf/config/Makefile b/tools/perf/config/Makefile
index f139dcd..f446895 100644
--- a/tools/perf/config/Makefile
+++ b/tools/perf/config/Makefile
@@ -39,7 +39,7 @@ src-perf := $(srctree)/tools/perf
 endif
 
 ifeq ($(obj-perf),)
-obj-perf := $(objtree)
+obj-perf := $(OUTPUT)
 endif
 
 ifneq ($(obj-perf),)

Re: [tip:perf/urgent] perf tools: Fix build errors with O and DESTDIR make vars set

[Robert Richter]

On 12.07.13 01:49:40, tip-bot for Robert Richter wrote:
> Commit-ID:  107de3724eff5a6fa6474a4d2aa5460b63749ebf
> Gitweb:     http://git.kernel.org/tip/107de3724eff5a6fa6474a4d2aa5460b63749ebf
> Author:     Robert Richter <robert.richter@linaro.org>
> AuthorDate: Tue, 11 Jun 2013 17:22:38 +0200
> Committer:  Arnaldo Carvalho de Melo <acme@redhat.com>
> CommitDate: Mon, 8 Jul 2013 17:34:00 -0300
> 
> perf tools: Fix build errors with O and DESTDIR make vars set
> 
> Fixing build errors with O and DESTDIR make vars set:
> 
>  $ make prefix=/usr/local O=$builddir DESTDIR=$destdir -C tools/ perf
>  ...
>  make[1]: Entering directory `.../.source/perf/tools/perf'
>      CC .../.build/perf/perf/util/parse-events.o
>  util/parse-events.c:14:32: fatal error: parse-events-bison.h: No such file or directory
>  compilation terminated.
>  make[1]: *** [.../.build/perf/perf/util/parse-events.o] Error 1
>  ...

Boris just raised another variant of building perf tools, which
unfortunately is broken now:

 $ make tools/perf
     LINK /home/robert/cx/linux/tools/perf/perf
 gcc: error: ../linux/tools/lib/lk/liblk.a: No such file or directory

There is also

 $ make -C tools perf
 $ make -C tools/perf

Plus variants with O= and DESTDIR set.

Looking how to fix this...

-Robert

[PATCH] perf tools: Fix 'make tools/perf'

[Robert Richter]

On 12.07.13 10:39:09, Robert Richter wrote:

> On 12.07.13 01:49:40, tip-bot for Robert Richter wrote:
> > Commit-ID:  107de3724eff5a6fa6474a4d2aa5460b63749ebf
> > Gitweb:     http://git.kernel.org/tip/107de3724eff5a6fa6474a4d2aa5460b63749ebf
> > Author:     Robert Richter <robert.richter@linaro.org>
> > AuthorDate: Tue, 11 Jun 2013 17:22:38 +0200
> > Committer:  Arnaldo Carvalho de Melo <acme@redhat.com>
> > CommitDate: Mon, 8 Jul 2013 17:34:00 -0300
> >
> > perf tools: Fix build errors with O and DESTDIR make vars set

>  $ make tools/perf
>      LINK /home/robert/cx/linux/tools/perf/perf
>  gcc: error: ../linux/tools/lib/lk/liblk.a: No such file or directory

Fix below.

-Robert


>From ff89180092114191b1871eaa2b6f18d17124b21e Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@linaro.org>
Date: Tue, 16 Jul 2013 15:46:27 +0200
Subject: [PATCH] perf tools: Fix 'make tools/perf'

Boris just raised another variant of building perf tools which is
broken:

 $ make tools/perf
 ...
     LINK /home/robert/cx/linux/tools/perf/perf
 gcc: error: ../linux/tools/lib/lk/liblk.a: No such file or directory

The variant wasn't considered by:

 107de37 perf tools: Fix build errors with O and DESTDIR make vars set

There are other variant of building perf too:

 $ make -C tools perf
 $ make -C tools/perf

Plus variants with O= and DESTDIR set.

This patch fixes the above and was tested with the following:

 $ make O=... DESTDIR=... tools/perf
 $ make O=... DESTDIR=... -C tools/ perf
 $ make O=... DESTDIR=... -C tools/perf
 $ make tools/perf
 $ make -C tools/ perf
 $ make -C tools/perf

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
---
 tools/perf/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 641fccd..1d718a9 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -124,7 +124,7 @@ strip-libs = $(filter-out -l%,$(1))
 ifneq ($(OUTPUT),)
   TE_PATH=$(OUTPUT)
 ifneq ($(subdir),)
-  LK_PATH=$(objtree)/lib/lk/
+  LK_PATH=$(OUTPUT)/../lib/lk/
 else
   LK_PATH=$(OUTPUT)
 endif
-- 
1.8.3.2

Re: [PATCH] perf tools: Fix 'make tools/perf'

[Arnaldo Carvalho de Melo]

Em Tue, Jul 16, 2013 at 04:50:36PM +0200, Robert Richter escreveu:
> There are other variant of building perf too:
> 
>  $ make -C tools perf
>  $ make -C tools/perf
> 
> Plus variants with O= and DESTDIR set.
> 
> This patch fixes the above and was tested with the following:
> 
>  $ make O=... DESTDIR=... tools/perf
>  $ make O=... DESTDIR=... -C tools/ perf
>  $ make O=... DESTDIR=... -C tools/perf
>  $ make tools/perf
>  $ make -C tools/ perf
>  $ make -C tools/perf

Thanks, those work now, applied, but can you check all those with actual
targets at the end, i.e. like:


make tools/perf install

Humm, probably it will look at the top level 'install' target? There was
some discussion about this, right? Can you refresh my mind?

- Arnaldo

Re: [PATCH] perf tools: Fix 'make tools/perf'

[Borislav Petkov]

On Wed, Jul 17, 2013 at 12:31:18PM -0300, Arnaldo Carvalho de Melo wrote:
> Humm, probably it will look at the top level 'install' target? There
> was some discussion about this, right? Can you refresh my mind?

that's

make tools/perf_install.

which goes to the target in tools/Makefile as the rest of the tools
there.

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--

Re: [PATCH] perf tools: Fix 'make tools/perf'

[Robert Richter]

On 17.07.13 17:40:01, Borislav Petkov wrote:
> On Wed, Jul 17, 2013 at 12:31:18PM -0300, Arnaldo Carvalho de Melo wrote:
> > Humm, probably it will look at the top level 'install' target? There
> > was some discussion about this, right? Can you refresh my mind?

Yeah, this

 make tools/perf install

does 2 different things and not what you want.

> 
> that's
> 
> make tools/perf_install.
> 
> which goes to the target in tools/Makefile as the rest of the tools
> there.

But Boris' one should work.

Thanks,

-Robert

Re: [PATCH] perf tools: Fix 'make tools/perf'

[Robert Richter]

Arnaldo,

I noticed you applied the patch to acme/perf/core, but it should be
instead in urgent since mainline is broken.

On 17.07.13 18:10:51, Robert Richter wrote:
> On 17.07.13 17:40:01, Borislav Petkov wrote:
> > On Wed, Jul 17, 2013 at 12:31:18PM -0300, Arnaldo Carvalho de Melo wrote:
> > > Humm, probably it will look at the top level 'install' target? There
> > > was some discussion about this, right? Can you refresh my mind?

Now tested with:

 make O=... DESTDIR=... tools/perf
 make O=... DESTDIR=... tools/perf_install
 make O=... DESTDIR=... -C tools/ perf
 make O=... DESTDIR=... -C tools/ perf_install
 make O=... DESTDIR=... -C tools/perf
 make O=... DESTDIR=... -C tools/perf install
 make tools/perf
 make DESTDIR=... tools/perf_install
 make -C tools/ perf
 make -C tools/ DESTDIR=... perf_install
 make -C tools/perf
 make -C tools/perf DESTDIR=... install

No issues noticed, accept that doc is built when running the 'install'
target, not 'all'.

Will look at this.

We also should remove dependencies from install targets that trigger a
rebuild since 'make install' is run as root. I had a conversation with
Linus about this for building the arm kernel, but the same applies
also for perf tools. I don't have the time for changing this now, but
maybe in some weeks or so.

Thanks,

-Robert

Re: [PATCH] perf tools: Fix 'make tools/perf'

[Arnaldo Carvalho de Melo]

Em Thu, Jul 18, 2013 at 02:19:24PM +0200, Robert Richter escreveu:
> Arnaldo,
> 
> I noticed you applied the patch to acme/perf/core, but it should be
> instead in urgent since mainline is broken.

I did it because there are alternative ways to build the tools that
don't require this fix, i.e. this is not _strictly_ needed to build the
tools.

What do you guys think: a case like this always needs to go to the
current release candidate? Ingo?

- Arnaldo
 
> On 17.07.13 18:10:51, Robert Richter wrote:
> > On 17.07.13 17:40:01, Borislav Petkov wrote:
> > > On Wed, Jul 17, 2013 at 12:31:18PM -0300, Arnaldo Carvalho de Melo wrote:
> > > > Humm, probably it will look at the top level 'install' target? There
> > > > was some discussion about this, right? Can you refresh my mind?
> 
> Now tested with:
> 
>  make O=... DESTDIR=... tools/perf
>  make O=... DESTDIR=... tools/perf_install
>  make O=... DESTDIR=... -C tools/ perf
>  make O=... DESTDIR=... -C tools/ perf_install
>  make O=... DESTDIR=... -C tools/perf
>  make O=... DESTDIR=... -C tools/perf install
>  make tools/perf
>  make DESTDIR=... tools/perf_install
>  make -C tools/ perf
>  make -C tools/ DESTDIR=... perf_install
>  make -C tools/perf
>  make -C tools/perf DESTDIR=... install
> 
> No issues noticed, accept that doc is built when running the 'install'
> target, not 'all'.
> 
> Will look at this.
> 
> We also should remove dependencies from install targets that trigger a
> rebuild since 'make install' is run as root. I had a conversation with
> Linus about this for building the arm kernel, but the same applies
> also for perf tools. I don't have the time for changing this now, but
> maybe in some weeks or so.
> 
> Thanks,
> 
> -Robert

Re: [PATCH] perf tools: Fix 'make tools/perf'

[Robert Richter]

On 18.07.13 13:19:13, Arnaldo Carvalho de Melo wrote:
> Em Thu, Jul 18, 2013 at 02:19:24PM +0200, Robert Richter escreveu:
> > I noticed you applied the patch to acme/perf/core, but it should be
> > instead in urgent since mainline is broken.
> 
> I did it because there are alternative ways to build the tools that
> don't require this fix, i.e. this is not _strictly_ needed to build the
> tools.
> 
> What do you guys think: a case like this always needs to go to the
> current release candidate? Ingo?

Since it worked before with v3.10 this is a regression in v3.11.

> > No issues noticed, accept that doc is built when running the 'install'
> > target, not 'all'.

There is another problem building the doc with xmlto. I noticed odd
timestamps leading *.1 files to be rebuilt (note that the .xml file is
newer than *.1):

 -rw-r--r-- 1 robert robert  5049 2013-07-18 14:57:27.000000000 +0200 perf-diff.1
 -rw-r--r-- 1 robert robert  6771 2013-07-18 14:57:27.000207803 +0200 perf-diff.xml

The reason is that xmlto builds the files in /tmp. In my system /tmp
is ext3 while /home is ext4. Only ext4 supports nanosecond
timestamps. Thus, timestamps are not quite comparable and make is
confused a bit.

This would fix this, but I am not sure if we really want this change:

diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
index 47df22d..1d6e045 100644
--- a/tools/perf/Documentation/Makefile
+++ b/tools/perf/Documentation/Makefile
@@ -273,7 +273,8 @@ $(MAN_HTML): $(OUTPUT)%.html : %.txt
 
 $(OUTPUT)%.1 $(OUTPUT)%.5 $(OUTPUT)%.7 : $(OUTPUT)%.xml
 	$(QUIET_XMLTO)$(RM) $@ && \
-	$(XMLTO) -o $(OUTPUT). -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $<
+	$(XMLTO) -o $(OUTPUT). -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $< && \
+	touch $@
 
 $(OUTPUT)%.xml : %.txt
 	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \

If so, I will send a patch.

Thanks,

-Robert

[PATCH] perf tools: Build docs with 'make all'

[Robert Richter]

Arnaldo,

On 18.07.13 14:19:24, Robert Richter wrote:
> No issues noticed, accept that doc is built when running the 'install'
> target, not 'all'.
> 
> Will look at this.

see patch below that fixes the above.

-Robert



>From 3bf424ea33526fefbce9f95d4ccfaffd36016a21 Mon Sep 17 00:00:00 2001
From: Robert Richter <robert.richter@linaro.org>
Date: Thu, 18 Jul 2013 17:57:20 +0200
Subject: [PATCH] perf tools: Build docs with 'make all'

Build documentation with 'make all', not 'make install'. We use the
new target try-man for this which is similar implemented as
try-install-man. Thus, building the doc is skipped if tools for this
are missing.

Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
---
 tools/perf/Documentation/Makefile | 6 ++++--
 tools/perf/Makefile               | 7 +++++--
 2 files changed, 9 insertions(+), 4 deletions(-)

diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
index 5a37a7c..47df22d 100644
--- a/tools/perf/Documentation/Makefile
+++ b/tools/perf/Documentation/Makefile
@@ -182,6 +182,8 @@ ifdef missing_tools
 	$(error "You need to install $(missing_tools) for man pages")
 endif
 
+do-man: man
+
 do-install-man: man
 	$(INSTALL) -d -m 755 $(DESTDIR)$(man1dir)
 #	$(INSTALL) -d -m 755 $(DESTDIR)$(man5dir)
@@ -192,11 +194,11 @@ do-install-man: man
 
 install-man: check-man-tools man
 
-try-install-man:
+try-install-man try-man:
 ifdef missing_tools
 	$(warning Please install $(missing_tools) to have the man pages installed)
 else
-	$(MAKE) do-install-man
+	$(MAKE) $(patsubst try-%,do-%,$@)
 endif
 
 install-info: info
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 1d718a9..8781de7 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -522,7 +522,7 @@ export INSTALL SHELL_PATH
 
 SHELL = $(SHELL_PATH)
 
-all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS)
+all: shell_compatibility_test $(ALL_PROGRAMS) $(LANG_BINDINGS) $(OTHER_PROGRAMS) try-man
 
 please_set_SHELL_PATH_to_a_more_modern_shell:
 	@$$(:)
@@ -710,9 +710,12 @@ endif
 
 DOC_TARGETS := doc man html info pdf
 
-INSTALL_DOC_TARGETS := $(patsubst %,install-%,$(DOC_TARGETS)) try-install-man
+INSTALL_DOC_TARGETS := $(patsubst %,install-%,$(DOC_TARGETS))
 INSTALL_DOC_TARGETS += quick-install-doc quick-install-man quick-install-html
 
+DOC_TARGETS	    += try-man
+INSTALL_DOC_TARGETS += try-install-man
+
 # 'make doc' should call 'make -C Documentation all'
 $(DOC_TARGETS):
 	$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) $(@:doc=all)
-- 
1.8.3.2

[tip:perf/core] perf tools: Fix 'make tools/perf'

[tip-bot for Robert Richter]

Commit-ID:  ab4ecda5205b56cb3b8b44f2c18ffdefb24313a2
Gitweb:     http://git.kernel.org/tip/ab4ecda5205b56cb3b8b44f2c18ffdefb24313a2
Author:     Robert Richter <rric@kernel.org>
AuthorDate: Tue, 16 Jul 2013 16:50:36 +0200
Committer:  Arnaldo Carvalho de Melo <acme@redhat.com>
CommitDate: Wed, 17 Jul 2013 10:40:02 -0300

perf tools: Fix 'make tools/perf'

Boris just raised another variant of building perf tools which is
broken:

 $ make tools/perf
 ...
     LINK /home/robert/cx/linux/tools/perf/perf
 gcc: error: ../linux/tools/lib/lk/liblk.a: No such file or directory

The variant wasn't considered by:

 107de37 perf tools: Fix build errors with O and DESTDIR make vars set

There are other variant of building perf too:

 $ make -C tools perf
 $ make -C tools/perf

Plus variants with O= and DESTDIR set.

This patch fixes the above and was tested with the following:

 $ make O=... DESTDIR=... tools/perf
 $ make O=... DESTDIR=... -C tools/ perf
 $ make O=... DESTDIR=... -C tools/perf
 $ make tools/perf
 $ make -C tools/ perf
 $ make -C tools/perf

Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Robert Richter <robert.richter@linaro.org>
Signed-off-by: Robert Richter <rric@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20130716145036.GH8731@rric.localhost
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
---
 tools/perf/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 5b7c6db..2a69026 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -124,7 +124,7 @@ strip-libs = $(filter-out -l%,$(1))
 ifneq ($(OUTPUT),)
   TE_PATH=$(OUTPUT)
 ifneq ($(subdir),)
-  LK_PATH=$(objtree)/lib/lk/
+  LK_PATH=$(OUTPUT)/../lib/lk/
 else
   LK_PATH=$(OUTPUT)
 endif