public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org, Joe Jin <joe.jin@oracle.com>,
	Eric Dumazet <edumazet@google.com>,
	"David S. Miller" <davem@davemloft.net>
Subject: [ 25/59] neighbour: fix a race in neigh_destroy()
Date: Fri, 26 Jul 2013 13:52:49 -0700	[thread overview]
Message-ID: <20130726205016.501762819@linuxfoundation.org> (raw)
In-Reply-To: <20130726205013.795696531@linuxfoundation.org>

3.4-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <eric.dumazet@gmail.com>

[ Upstream commit c9ab4d85de222f3390c67aedc9c18a50e767531e ]

There is a race in neighbour code, because neigh_destroy() uses
skb_queue_purge(&neigh->arp_queue) without holding neighbour lock,
while other parts of the code assume neighbour rwlock is what
protects arp_queue

Convert all skb_queue_purge() calls to the __skb_queue_purge() variant

Use __skb_queue_head_init() instead of skb_queue_head_init()
to make clear we do not use arp_queue.lock

And hold neigh->lock in neigh_destroy() to close the race.

Reported-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/neighbour.c |   12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -237,7 +237,7 @@ static void neigh_flush_dev(struct neigh
 				   we must kill timers etc. and move
 				   it to safe state.
 				 */
-				skb_queue_purge(&n->arp_queue);
+				__skb_queue_purge(&n->arp_queue);
 				n->arp_queue_len_bytes = 0;
 				n->output = neigh_blackhole;
 				if (n->nud_state & NUD_VALID)
@@ -300,7 +300,7 @@ static struct neighbour *neigh_alloc(str
 	if (!n)
 		goto out_entries;
 
-	skb_queue_head_init(&n->arp_queue);
+	__skb_queue_head_init(&n->arp_queue);
 	rwlock_init(&n->lock);
 	seqlock_init(&n->ha_lock);
 	n->updated	  = n->used = now;
@@ -721,7 +721,9 @@ void neigh_destroy(struct neighbour *nei
 	if (neigh_del_timer(neigh))
 		printk(KERN_WARNING "Impossible event.\n");
 
-	skb_queue_purge(&neigh->arp_queue);
+	write_lock_bh(&neigh->lock);
+	__skb_queue_purge(&neigh->arp_queue);
+	write_unlock_bh(&neigh->lock);
 	neigh->arp_queue_len_bytes = 0;
 
 	if (dev->netdev_ops->ndo_neigh_destroy)
@@ -867,7 +869,7 @@ static void neigh_invalidate(struct neig
 		neigh->ops->error_report(neigh, skb);
 		write_lock(&neigh->lock);
 	}
-	skb_queue_purge(&neigh->arp_queue);
+	__skb_queue_purge(&neigh->arp_queue);
 	neigh->arp_queue_len_bytes = 0;
 }
 
@@ -1206,7 +1208,7 @@ int neigh_update(struct neighbour *neigh
 
 			write_lock_bh(&neigh->lock);
 		}
-		skb_queue_purge(&neigh->arp_queue);
+		__skb_queue_purge(&neigh->arp_queue);
 		neigh->arp_queue_len_bytes = 0;
 	}
 out:



  parent reply	other threads:[~2013-07-26 21:19 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-26 20:52 [ 00/59] 3.4.55-stable review Greg Kroah-Hartman
2013-07-26 20:52 ` [ 01/59] ext3: fix data=journal fast mount/umount hang Greg Kroah-Hartman
2013-07-26 20:52 ` [ 02/59] libata: skip SRST for all SIMG [34]7x port-multipliers Greg Kroah-Hartman
2013-07-26 20:52 ` [ 03/59] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs Greg Kroah-Hartman
2013-07-26 20:52 ` [ 04/59] ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK Greg Kroah-Hartman
2013-07-26 20:52 ` [ 05/59] tick: Prevent uncontrolled switch to oneshot mode Greg Kroah-Hartman
2013-07-26 20:52 ` [ 06/59] rt2x00: read 5GHz TX power values from the correct offset Greg Kroah-Hartman
2013-07-26 20:52 ` [ 07/59] ath9k: Do not assign noise for NULL caldata Greg Kroah-Hartman
2013-07-26 20:52 ` [ 08/59] SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down Greg Kroah-Hartman
2013-07-26 20:52 ` [ 09/59] SCSI: mpt2sas: fix firmware failure with wrong task attribute Greg Kroah-Hartman
2013-07-26 20:52 ` [ 10/59] tracing: Use current_uid() for critical time tracing Greg Kroah-Hartman
2013-07-26 20:52 ` [ 11/59] iommu/amd: Only unmap large pages from the first pte Greg Kroah-Hartman
2013-07-26 20:52 ` [ 12/59] perf: Clone child context from parent context pmu Greg Kroah-Hartman
2013-07-26 20:52 ` [ 13/59] perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario Greg Kroah-Hartman
2013-07-26 20:52 ` [ 14/59] perf: Fix perf_lock_task_context() vs RCU Greg Kroah-Hartman
2013-07-26 20:52 ` [ 15/59] sparc32: vm_area_struct access for old Sun SPARCs Greg Kroah-Hartman
2013-07-27 21:45   ` Ben Hutchings
2013-07-28  2:27     ` David Miller
2013-07-28 18:37       ` Greg KH
2013-07-26 20:52 ` [ 16/59] sparc64 address-congruence property Greg Kroah-Hartman
2013-07-26 20:52 ` [ 17/59] sparc: tsb must be flushed before tlb Greg Kroah-Hartman
2013-07-26 20:52 ` [ 18/59] bridge: fix switched interval for MLD Query types Greg Kroah-Hartman
2013-07-26 20:52 ` [ 19/59] ipv4: Fixed MD5 key lookups when adding/ removing MD5 to/ from TCP sockets Greg Kroah-Hartman
2013-07-26 20:52 ` [ 20/59] ipv6: dont call addrconf_dst_alloc again when enable lo Greg Kroah-Hartman
2013-07-26 20:52 ` [ 21/59] macvtap: fix recovery from gup errors Greg Kroah-Hartman
2013-07-26 20:52 ` [ 22/59] ipv6: ip6_sk_dst_check() must not assume ipv6 dst Greg Kroah-Hartman
2013-07-26 20:52 ` [ 23/59] af_key: fix info leaks in notify messages Greg Kroah-Hartman
2013-07-26 20:52 ` [ 24/59] sh_eth: fix unhandled RFE interrupt Greg Kroah-Hartman
2013-07-26 20:52 ` Greg Kroah-Hartman [this message]
2013-07-26 20:52 ` [ 26/59] x25: Fix broken locking in ioctl error paths Greg Kroah-Hartman
2013-07-26 20:52 ` [ 27/59] net: Swap ver and type in pppoe_hdr Greg Kroah-Hartman
2013-07-26 20:52 ` [ 28/59] ipv6,mcast: always hold idev->lock before mca_lock Greg Kroah-Hartman
2013-07-26 20:52 ` [ 29/59] l2tp: add missing .owner to struct pppox_proto Greg Kroah-Hartman
2013-07-26 20:52 ` [ 30/59] ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data Greg Kroah-Hartman
2013-07-26 20:52 ` [ 31/59] ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size Greg Kroah-Hartman
2013-07-26 20:52 ` [ 32/59] sunvnet: vnet_port_remove must call unregister_netdev Greg Kroah-Hartman
2013-07-26 20:52 ` [ 33/59] ifb: fix rcu_sched self-detected stalls Greg Kroah-Hartman
2013-07-26 20:52 ` [ 34/59] macvtap: correctly linearize skb when zerocopy is used Greg Kroah-Hartman
2013-07-26 20:52 ` [ 35/59] ipv6: in case of link failure remove route directly instead of letting it expire Greg Kroah-Hartman
2013-07-26 20:53 ` [ 36/59] 9p: fix off by one causing access violations and memory corruption Greg Kroah-Hartman
2013-07-26 20:53 ` [ 37/59] dummy: fix oops when loading the dummy failed Greg Kroah-Hartman
2013-07-26 20:53 ` [ 38/59] ifb: fix oops when loading the ifb failed Greg Kroah-Hartman
2013-07-26 20:53 ` [ 39/59] atl1e: fix dma mapping warnings Greg Kroah-Hartman
2013-07-26 20:53 ` [ 40/59] atl1e: unmap partially mapped skb on dma error and free skb Greg Kroah-Hartman
2013-07-26 20:53 ` [ 41/59] vlan: fix a race in egress prio management Greg Kroah-Hartman
2013-07-26 20:53 ` [ 42/59] writeback: Fix periodic writeback after fs mount Greg Kroah-Hartman
2013-07-26 20:53 ` [ 43/59] SCSI: megaraid_sas: fix memory leak if SGL has zero length entries Greg Kroah-Hartman
2013-07-26 20:53 ` [ 44/59] SCSI: Fix incorrect memset in bnx2fc_parse_fcp_rsp Greg Kroah-Hartman
2013-07-26 20:53 ` [ 45/59] [SCSI] zfcp: block queue limits with data router Greg Kroah-Hartman
2013-07-26 20:53 ` [ 46/59] usb: serial: option: blacklist ONDA MT689DC QMI interface Greg Kroah-Hartman
2013-07-26 20:53 ` [ 47/59] usb: option: add TP-LINK MA260 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 48/59] usb: serial: option: add Olivetti Olicard 200 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 49/59] usb: serial: option.c: remove ONDA MT825UP product ID fromdriver Greg Kroah-Hartman
2013-07-26 20:53 ` [ 50/59] USB: option: append Petatel NP10T device to GSM modems list Greg Kroah-Hartman
2013-07-26 20:53 ` [ 51/59] USB: option: add D-Link DWM-152/C1 and DWM-156/C1 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 52/59] usb: serial: option: Add ONYX 3G device support Greg Kroah-Hartman
2013-07-26 20:53 ` [ 53/59] usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter Greg Kroah-Hartman
2013-07-26 20:53 ` [ 54/59] USB: cp210x: add MMB and PI ZigBee USB Device Support Greg Kroah-Hartman
2013-07-26 20:53 ` [ 55/59] usb: cp210x support SEL C662 Vendor/Device Greg Kroah-Hartman
2013-07-26 20:53 ` [ 56/59] lockd: protect nlm_blocked access in nlmsvc_retry_blocked Greg Kroah-Hartman
2013-07-26 20:53 ` [ 57/59] tracing: Fix irqs-off tag display in syscall tracing Greg Kroah-Hartman
2013-07-26 20:53 ` [ 58/59] hrtimers: Move SMP function call to thread context Greg Kroah-Hartman
2013-07-26 20:53 ` [ 59/59] ALSA: usb-audio: 6fire: return correct XRUN indication Greg Kroah-Hartman
2013-07-27 21:28 ` [ 00/59] 3.4.55-stable review linux

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130726205016.501762819@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=joe.jin@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox