From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Neil Horman <nhorman@tuxdriver.com>,
Jay Cliburn <jcliburn@gmail.com>,
Chris Snook <chris.snook@gmail.com>,
"David S. Miller" <davem@davemloft.net>
Subject: [ 39/59] atl1e: fix dma mapping warnings
Date: Fri, 26 Jul 2013 13:53:03 -0700 [thread overview]
Message-ID: <20130726205018.004397497@linuxfoundation.org> (raw)
In-Reply-To: <20130726205013.795696531@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Neil Horman <nhorman@tuxdriver.com>
[ Upstream commit 352900b583b2852152a1e05ea0e8b579292e731e ]
Recently had this backtrace reported:
WARNING: at lib/dma-debug.c:937 check_unmap+0x47d/0x930()
Hardware name: System Product Name
ATL1E 0000:02:00.0: DMA-API: device driver failed to check map error[device
address=0x00000000cbfd1000] [size=90 bytes] [mapped as single]
Modules linked in: xt_conntrack nf_conntrack ebtable_filter ebtables
ip6table_filter ip6_tables snd_hda_codec_hdmi snd_hda_codec_realtek iTCO_wdt
iTCO_vendor_support snd_hda_intel acpi_cpufreq mperf coretemp btrfs zlib_deflate
snd_hda_codec snd_hwdep microcode raid6_pq libcrc32c snd_seq usblp serio_raw xor
snd_seq_device joydev snd_pcm snd_page_alloc snd_timer snd lpc_ich i2c_i801
soundcore mfd_core atl1e asus_atk0110 ata_generic pata_acpi radeon i2c_algo_bit
drm_kms_helper ttm drm i2c_core pata_marvell uinput
Pid: 314, comm: systemd-journal Not tainted 3.9.0-0.rc6.git2.3.fc19.x86_64 #1
Call Trace:
<IRQ> [<ffffffff81069106>] warn_slowpath_common+0x66/0x80
[<ffffffff8106916c>] warn_slowpath_fmt+0x4c/0x50
[<ffffffff8138151d>] check_unmap+0x47d/0x930
[<ffffffff810ad048>] ? sched_clock_cpu+0xa8/0x100
[<ffffffff81381a2f>] debug_dma_unmap_page+0x5f/0x70
[<ffffffff8137ce30>] ? unmap_single+0x20/0x30
[<ffffffffa01569a1>] atl1e_intr+0x3a1/0x5b0 [atl1e]
[<ffffffff810d53fd>] ? trace_hardirqs_off+0xd/0x10
[<ffffffff81119636>] handle_irq_event_percpu+0x56/0x390
[<ffffffff811199ad>] handle_irq_event+0x3d/0x60
[<ffffffff8111cb6a>] handle_fasteoi_irq+0x5a/0x100
[<ffffffff8101c36f>] handle_irq+0xbf/0x150
[<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50
[<ffffffff81073b10>] ? irq_enter+0x50/0xa0
[<ffffffff8172738d>] do_IRQ+0x4d/0xc0
[<ffffffff811dcb2f>] ? file_sb_list_del+0x3f/0x50
[<ffffffff8171c6b2>] common_interrupt+0x72/0x72
<EOI> [<ffffffff810db5b2>] ? lock_release+0xc2/0x310
[<ffffffff8109ea04>] lg_local_unlock_cpu+0x24/0x50
[<ffffffff811dcb2f>] file_sb_list_del+0x3f/0x50
[<ffffffff811dcb6d>] fput+0x2d/0xc0
[<ffffffff811d8ea1>] filp_close+0x61/0x90
[<ffffffff811fae4d>] __close_fd+0x8d/0x150
[<ffffffff811d8ef0>] sys_close+0x20/0x50
[<ffffffff81725699>] system_call_fastpath+0x16/0x1b
The usual straighforward failure to check for dma_mapping_error after a map
operation is completed.
This patch should fix it, the reporter wandered off after filing this bz:
https://bugzilla.redhat.com/show_bug.cgi?id=954170
and I don't have hardware to test, but the fix is pretty straightforward, so I
figured I'd post it for review.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Jay Cliburn <jcliburn@gmail.com>
CC: Chris Snook <chris.snook@gmail.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/net/ethernet/atheros/atl1e/atl1e_main.c | 28 +++++++++++++++++++++---
1 file changed, 25 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
+++ b/drivers/net/ethernet/atheros/atl1e/atl1e_main.c
@@ -1688,8 +1688,8 @@ check_sum:
return 0;
}
-static void atl1e_tx_map(struct atl1e_adapter *adapter,
- struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
+static int atl1e_tx_map(struct atl1e_adapter *adapter,
+ struct sk_buff *skb, struct atl1e_tpd_desc *tpd)
{
struct atl1e_tpd_desc *use_tpd = NULL;
struct atl1e_tx_buffer *tx_buffer = NULL;
@@ -1700,6 +1700,7 @@ static void atl1e_tx_map(struct atl1e_ad
u16 nr_frags;
u16 f;
int segment;
+ int ring_start = adapter->tx_ring.next_to_use;
nr_frags = skb_shinfo(skb)->nr_frags;
segment = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
@@ -1712,6 +1713,9 @@ static void atl1e_tx_map(struct atl1e_ad
tx_buffer->length = map_len;
tx_buffer->dma = pci_map_single(adapter->pdev,
skb->data, hdr_len, PCI_DMA_TODEVICE);
+ if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma))
+ return -ENOSPC;
+
ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
mapped_len += map_len;
use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
@@ -1738,6 +1742,13 @@ static void atl1e_tx_map(struct atl1e_ad
tx_buffer->dma =
pci_map_single(adapter->pdev, skb->data + mapped_len,
map_len, PCI_DMA_TODEVICE);
+
+ if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) {
+ /* Reset the tx rings next pointer */
+ adapter->tx_ring.next_to_use = ring_start;
+ return -ENOSPC;
+ }
+
ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_SINGLE);
mapped_len += map_len;
use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
@@ -1773,6 +1784,13 @@ static void atl1e_tx_map(struct atl1e_ad
(i * MAX_TX_BUF_LEN),
tx_buffer->length,
DMA_TO_DEVICE);
+
+ if (dma_mapping_error(&adapter->pdev->dev, tx_buffer->dma)) {
+ /* Reset the ring next to use pointer */
+ adapter->tx_ring.next_to_use = ring_start;
+ return -ENOSPC;
+ }
+
ATL1E_SET_PCIMAP_TYPE(tx_buffer, ATL1E_TX_PCIMAP_PAGE);
use_tpd->buffer_addr = cpu_to_le64(tx_buffer->dma);
use_tpd->word2 = (use_tpd->word2 & (~TPD_BUFLEN_MASK)) |
@@ -1790,6 +1808,7 @@ static void atl1e_tx_map(struct atl1e_ad
/* The last buffer info contain the skb address,
so it will be free after unmap */
tx_buffer->skb = skb;
+ return 0;
}
static void atl1e_tx_queue(struct atl1e_adapter *adapter, u16 count,
@@ -1857,10 +1876,13 @@ static netdev_tx_t atl1e_xmit_frame(stru
return NETDEV_TX_OK;
}
- atl1e_tx_map(adapter, skb, tpd);
+ if (atl1e_tx_map(adapter, skb, tpd))
+ goto out;
+
atl1e_tx_queue(adapter, tpd_req, tpd);
netdev->trans_start = jiffies; /* NETIF_F_LLTX driver :( */
+out:
spin_unlock_irqrestore(&adapter->tx_lock, flags);
return NETDEV_TX_OK;
}
next prev parent reply other threads:[~2013-07-26 21:18 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-26 20:52 [ 00/59] 3.4.55-stable review Greg Kroah-Hartman
2013-07-26 20:52 ` [ 01/59] ext3: fix data=journal fast mount/umount hang Greg Kroah-Hartman
2013-07-26 20:52 ` [ 02/59] libata: skip SRST for all SIMG [34]7x port-multipliers Greg Kroah-Hartman
2013-07-26 20:52 ` [ 03/59] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs Greg Kroah-Hartman
2013-07-26 20:52 ` [ 04/59] ASoC: sglt5000: Fix SGTL5000_PLL_FRAC_DIV_MASK Greg Kroah-Hartman
2013-07-26 20:52 ` [ 05/59] tick: Prevent uncontrolled switch to oneshot mode Greg Kroah-Hartman
2013-07-26 20:52 ` [ 06/59] rt2x00: read 5GHz TX power values from the correct offset Greg Kroah-Hartman
2013-07-26 20:52 ` [ 07/59] ath9k: Do not assign noise for NULL caldata Greg Kroah-Hartman
2013-07-26 20:52 ` [ 08/59] SCSI: zfcp: fix adapter (re)open recovery while link to SAN is down Greg Kroah-Hartman
2013-07-26 20:52 ` [ 09/59] SCSI: mpt2sas: fix firmware failure with wrong task attribute Greg Kroah-Hartman
2013-07-26 20:52 ` [ 10/59] tracing: Use current_uid() for critical time tracing Greg Kroah-Hartman
2013-07-26 20:52 ` [ 11/59] iommu/amd: Only unmap large pages from the first pte Greg Kroah-Hartman
2013-07-26 20:52 ` [ 12/59] perf: Clone child context from parent context pmu Greg Kroah-Hartman
2013-07-26 20:52 ` [ 13/59] perf: Remove WARN_ON_ONCE() check in __perf_event_enable() for valid scenario Greg Kroah-Hartman
2013-07-26 20:52 ` [ 14/59] perf: Fix perf_lock_task_context() vs RCU Greg Kroah-Hartman
2013-07-26 20:52 ` [ 15/59] sparc32: vm_area_struct access for old Sun SPARCs Greg Kroah-Hartman
2013-07-27 21:45 ` Ben Hutchings
2013-07-28 2:27 ` David Miller
2013-07-28 18:37 ` Greg KH
2013-07-26 20:52 ` [ 16/59] sparc64 address-congruence property Greg Kroah-Hartman
2013-07-26 20:52 ` [ 17/59] sparc: tsb must be flushed before tlb Greg Kroah-Hartman
2013-07-26 20:52 ` [ 18/59] bridge: fix switched interval for MLD Query types Greg Kroah-Hartman
2013-07-26 20:52 ` [ 19/59] ipv4: Fixed MD5 key lookups when adding/ removing MD5 to/ from TCP sockets Greg Kroah-Hartman
2013-07-26 20:52 ` [ 20/59] ipv6: dont call addrconf_dst_alloc again when enable lo Greg Kroah-Hartman
2013-07-26 20:52 ` [ 21/59] macvtap: fix recovery from gup errors Greg Kroah-Hartman
2013-07-26 20:52 ` [ 22/59] ipv6: ip6_sk_dst_check() must not assume ipv6 dst Greg Kroah-Hartman
2013-07-26 20:52 ` [ 23/59] af_key: fix info leaks in notify messages Greg Kroah-Hartman
2013-07-26 20:52 ` [ 24/59] sh_eth: fix unhandled RFE interrupt Greg Kroah-Hartman
2013-07-26 20:52 ` [ 25/59] neighbour: fix a race in neigh_destroy() Greg Kroah-Hartman
2013-07-26 20:52 ` [ 26/59] x25: Fix broken locking in ioctl error paths Greg Kroah-Hartman
2013-07-26 20:52 ` [ 27/59] net: Swap ver and type in pppoe_hdr Greg Kroah-Hartman
2013-07-26 20:52 ` [ 28/59] ipv6,mcast: always hold idev->lock before mca_lock Greg Kroah-Hartman
2013-07-26 20:52 ` [ 29/59] l2tp: add missing .owner to struct pppox_proto Greg Kroah-Hartman
2013-07-26 20:52 ` [ 30/59] ipv6: call udp_push_pending_frames when uncorking a socket with AF_INET pending data Greg Kroah-Hartman
2013-07-26 20:52 ` [ 31/59] ipv6: ip6_append_data_mtu did not care about pmtudisc and frag_size Greg Kroah-Hartman
2013-07-26 20:52 ` [ 32/59] sunvnet: vnet_port_remove must call unregister_netdev Greg Kroah-Hartman
2013-07-26 20:52 ` [ 33/59] ifb: fix rcu_sched self-detected stalls Greg Kroah-Hartman
2013-07-26 20:52 ` [ 34/59] macvtap: correctly linearize skb when zerocopy is used Greg Kroah-Hartman
2013-07-26 20:52 ` [ 35/59] ipv6: in case of link failure remove route directly instead of letting it expire Greg Kroah-Hartman
2013-07-26 20:53 ` [ 36/59] 9p: fix off by one causing access violations and memory corruption Greg Kroah-Hartman
2013-07-26 20:53 ` [ 37/59] dummy: fix oops when loading the dummy failed Greg Kroah-Hartman
2013-07-26 20:53 ` [ 38/59] ifb: fix oops when loading the ifb failed Greg Kroah-Hartman
2013-07-26 20:53 ` Greg Kroah-Hartman [this message]
2013-07-26 20:53 ` [ 40/59] atl1e: unmap partially mapped skb on dma error and free skb Greg Kroah-Hartman
2013-07-26 20:53 ` [ 41/59] vlan: fix a race in egress prio management Greg Kroah-Hartman
2013-07-26 20:53 ` [ 42/59] writeback: Fix periodic writeback after fs mount Greg Kroah-Hartman
2013-07-26 20:53 ` [ 43/59] SCSI: megaraid_sas: fix memory leak if SGL has zero length entries Greg Kroah-Hartman
2013-07-26 20:53 ` [ 44/59] SCSI: Fix incorrect memset in bnx2fc_parse_fcp_rsp Greg Kroah-Hartman
2013-07-26 20:53 ` [ 45/59] [SCSI] zfcp: block queue limits with data router Greg Kroah-Hartman
2013-07-26 20:53 ` [ 46/59] usb: serial: option: blacklist ONDA MT689DC QMI interface Greg Kroah-Hartman
2013-07-26 20:53 ` [ 47/59] usb: option: add TP-LINK MA260 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 48/59] usb: serial: option: add Olivetti Olicard 200 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 49/59] usb: serial: option.c: remove ONDA MT825UP product ID fromdriver Greg Kroah-Hartman
2013-07-26 20:53 ` [ 50/59] USB: option: append Petatel NP10T device to GSM modems list Greg Kroah-Hartman
2013-07-26 20:53 ` [ 51/59] USB: option: add D-Link DWM-152/C1 and DWM-156/C1 Greg Kroah-Hartman
2013-07-26 20:53 ` [ 52/59] usb: serial: option: Add ONYX 3G device support Greg Kroah-Hartman
2013-07-26 20:53 ` [ 53/59] usb: serial: cp210x: Add USB ID for Netgear Switches embedded serial adapter Greg Kroah-Hartman
2013-07-26 20:53 ` [ 54/59] USB: cp210x: add MMB and PI ZigBee USB Device Support Greg Kroah-Hartman
2013-07-26 20:53 ` [ 55/59] usb: cp210x support SEL C662 Vendor/Device Greg Kroah-Hartman
2013-07-26 20:53 ` [ 56/59] lockd: protect nlm_blocked access in nlmsvc_retry_blocked Greg Kroah-Hartman
2013-07-26 20:53 ` [ 57/59] tracing: Fix irqs-off tag display in syscall tracing Greg Kroah-Hartman
2013-07-26 20:53 ` [ 58/59] hrtimers: Move SMP function call to thread context Greg Kroah-Hartman
2013-07-26 20:53 ` [ 59/59] ALSA: usb-audio: 6fire: return correct XRUN indication Greg Kroah-Hartman
2013-07-27 21:28 ` [ 00/59] 3.4.55-stable review linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130726205018.004397497@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=chris.snook@gmail.com \
--cc=davem@davemloft.net \
--cc=jcliburn@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=nhorman@tuxdriver.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox