From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org,
"Rick Farina (Zero_Chaos)" <zerochaos@gentoo.org>
Subject: [ 29/39] USB: serial: ftdi_sio: add more RT Systems ftdi devices
Date: Fri, 2 Aug 2013 18:18:39 +0800 [thread overview]
Message-ID: <20130802101500.926744602@linuxfoundation.org> (raw)
In-Reply-To: <20130802101456.800497005@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: "Rick Farina (Zero_Chaos)" <zerochaos@gentoo.org>
commit fed1f1ed90bce42ea010e2904cbc04e7b8304940 upstream.
RT Systems makes many usb serial cables based on the ftdi_sio driver for
programming various amateur radios. This patch is a full listing of
their current product offerings and should allow these cables to all
be recognized.
Signed-off-by: Rick Farina (Zero_Chaos) <zerochaos@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/serial/ftdi_sio.c | 31 ++++++++++++++++++++++++++++---
drivers/usb/serial/ftdi_sio_ids.h | 34 +++++++++++++++++++++++++++++-----
2 files changed, 57 insertions(+), 8 deletions(-)
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -745,9 +745,34 @@ static struct usb_device_id id_table_com
{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
- { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
- { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
- { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_RTS01_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29A_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29F_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S01_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_29C_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_81B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_82B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5D_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K4Y_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_K5G_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S05_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_60_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_61_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_62_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_63B_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_64_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_65_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_92D_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_W5R_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_A5R_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_PW1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -815,11 +815,35 @@
/*
* RT Systems programming cables for various ham radios
*/
-#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
-#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
-#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
-#define RTSYSTEMS_RTS01_PID 0x9e57 /* USB-RTS01 Radio Cable */
-
+#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
+#define RTSYSTEMS_USB_S03_PID 0x9001 /* RTS-03 USB to Serial Adapter */
+#define RTSYSTEMS_USB_59_PID 0x9e50 /* USB-59 USB to 8 pin plug */
+#define RTSYSTEMS_USB_57A_PID 0x9e51 /* USB-57A USB to 4pin 3.5mm plug */
+#define RTSYSTEMS_USB_57B_PID 0x9e52 /* USB-57B USB to extended 4pin 3.5mm plug */
+#define RTSYSTEMS_USB_29A_PID 0x9e53 /* USB-29A USB to 3.5mm stereo plug */
+#define RTSYSTEMS_USB_29B_PID 0x9e54 /* USB-29B USB to 6 pin mini din */
+#define RTSYSTEMS_USB_29F_PID 0x9e55 /* USB-29F USB to 6 pin modular plug */
+#define RTSYSTEMS_USB_62B_PID 0x9e56 /* USB-62B USB to 8 pin mini din plug*/
+#define RTSYSTEMS_USB_S01_PID 0x9e57 /* USB-RTS01 USB to 3.5 mm stereo plug*/
+#define RTSYSTEMS_USB_63_PID 0x9e58 /* USB-63 USB to 9 pin female*/
+#define RTSYSTEMS_USB_29C_PID 0x9e59 /* USB-29C USB to 4 pin modular plug*/
+#define RTSYSTEMS_USB_81B_PID 0x9e5A /* USB-81 USB to 8 pin mini din plug*/
+#define RTSYSTEMS_USB_82B_PID 0x9e5B /* USB-82 USB to 2.5 mm stereo plug*/
+#define RTSYSTEMS_USB_K5D_PID 0x9e5C /* USB-K5D USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_K4Y_PID 0x9e5D /* USB-K4Y USB to 2.5/3.5 mm plugs*/
+#define RTSYSTEMS_USB_K5G_PID 0x9e5E /* USB-K5G USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_S05_PID 0x9e5F /* USB-RTS05 USB to 2.5 mm stereo plug*/
+#define RTSYSTEMS_USB_60_PID 0x9e60 /* USB-60 USB to 6 pin din*/
+#define RTSYSTEMS_USB_61_PID 0x9e61 /* USB-61 USB to 6 pin mini din*/
+#define RTSYSTEMS_USB_62_PID 0x9e62 /* USB-62 USB to 8 pin mini din*/
+#define RTSYSTEMS_USB_63B_PID 0x9e63 /* USB-63 USB to 9 pin female*/
+#define RTSYSTEMS_USB_64_PID 0x9e64 /* USB-64 USB to 9 pin male*/
+#define RTSYSTEMS_USB_65_PID 0x9e65 /* USB-65 USB to 9 pin female null modem*/
+#define RTSYSTEMS_USB_92_PID 0x9e66 /* USB-92 USB to 12 pin plug*/
+#define RTSYSTEMS_USB_92D_PID 0x9e67 /* USB-92D USB to 12 pin plug data*/
+#define RTSYSTEMS_USB_W5R_PID 0x9e68 /* USB-W5R USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_A5R_PID 0x9e69 /* USB-A5R USB to 8 pin modular plug*/
+#define RTSYSTEMS_USB_PW1_PID 0x9e6A /* USB-PW1 USB to 8 pin modular plug*/
/*
* Physik Instrumente
next prev parent reply other threads:[~2013-08-02 10:19 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-02 10:18 [ 00/39] 3.4.56-stable review Greg Kroah-Hartman
2013-08-02 10:18 ` [ 01/39] iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow Greg Kroah-Hartman
2013-08-02 10:18 ` [ 02/39] USB: storage: Add MicroVault Flash Drive to unusual_devs Greg Kroah-Hartman
2013-08-02 10:18 ` [ 03/39] ASoC: max98088 - fix element type of the register cache Greg Kroah-Hartman
2013-08-02 10:18 ` [ 04/39] ASoC: wm8962: Remove remaining direct register cache accesses Greg Kroah-Hartman
2013-08-02 10:18 ` [ 05/39] SCSI: sd: fix crash when UA received on DIF enabled device Greg Kroah-Hartman
2013-08-02 10:18 ` [ 06/39] SCSI: qla2xxx: Properly set the tagging for commands Greg Kroah-Hartman
2013-08-02 10:18 ` [ 07/39] tracing: Fix irqs-off tag display in syscall tracing Greg Kroah-Hartman
2013-08-02 10:18 ` [ 08/39] usb: host: xhci: Enable XHCI_SPURIOUS_SUCCESS for all controllers with xhci 1.0 Greg Kroah-Hartman
2013-08-02 10:18 ` [ 09/39] xhci: fix null pointer dereference on ring_doorbell_for_active_rings Greg Kroah-Hartman
2013-08-02 10:18 ` [ 10/39] xhci: Avoid NULL pointer deref when host dies Greg Kroah-Hartman
2013-08-02 10:18 ` [ 11/39] usb: dwc3: fix wrong bit mask in dwc3_event_type Greg Kroah-Hartman
2013-08-02 10:18 ` [ 12/39] usb: dwc3: gadget: dont prevent gadget from being probed if we fail Greg Kroah-Hartman
2013-08-02 10:18 ` [ 13/39] USB: ti_usb_3410_5052: fix dynamic-id matching Greg Kroah-Hartman
2013-08-02 10:18 ` [ 14/39] USB: misc: Add Manhattan Hi-Speed USB DVI Converter to sisusbvga Greg Kroah-Hartman
2013-08-02 10:18 ` [ 15/39] usb: Clear both buffers when clearing a control transfer TT buffer Greg Kroah-Hartman
2013-08-02 10:18 ` [ 16/39] staging: comedi: COMEDI_CANCEL ioctl should wake up read/write Greg Kroah-Hartman
2013-08-02 10:18 ` [ 17/39] Btrfs: fix lock leak when resuming snapshot deletion Greg Kroah-Hartman
2013-08-02 10:18 ` [ 18/39] Btrfs: re-add root to dead root list if we stop dropping it Greg Kroah-Hartman
2013-08-02 10:18 ` [ 19/39] xen/blkback: Check device permissions before allowing OP_DISCARD Greg Kroah-Hartman
2013-08-02 10:18 ` [ 20/39] ata: Fix DVD not dectected at some platform with Wellsburg PCH Greg Kroah-Hartman
2013-08-02 10:18 ` [ 21/39] libata: make it clear that sata_inic162x is experimental Greg Kroah-Hartman
2013-08-02 10:18 ` [ 22/39] powerpc/modules: Module CRC relocation fix causes perf issues Greg Kroah-Hartman
2013-08-02 10:18 ` [ 23/39] ACPI / memhotplug: Fix a stale pointer in error path Greg Kroah-Hartman
2013-08-02 10:18 ` [ 24/39] dm verity: fix inability to use a few specific devices sizes Greg Kroah-Hartman
2013-08-02 10:18 ` [ 25/39] drm/radeon: fix endian issues with DP handling (v3) Greg Kroah-Hartman
2013-08-02 10:18 ` [ 26/39] drm/radeon: fix combios tables on older cards Greg Kroah-Hartman
2013-08-02 10:18 ` [ 27/39] drm/radeon: improve dac adjust heuristics for legacy pdac Greg Kroah-Hartman
2013-08-02 10:18 ` [ 28/39] drm/radeon/atom: initialize more atom interpretor elements to 0 Greg Kroah-Hartman
2013-08-02 10:18 ` Greg Kroah-Hartman [this message]
2013-08-02 10:18 ` [ 30/39] livelock avoidance in sget() Greg Kroah-Hartman
2013-08-02 10:18 ` [ 31/39] md/raid5: fix interaction of replace and recovery Greg Kroah-Hartman
2013-08-02 10:18 ` [ 32/39] md/raid10: remove use-after-free bug Greg Kroah-Hartman
2013-08-02 10:18 ` [ 33/39] xen/evtchn: avoid a deadlock when unbinding an event channel Greg Kroah-Hartman
2013-08-02 10:18 ` [ 34/39] firewire: fix libdc1394/FlyCap2 iso event regression Greg Kroah-Hartman
2013-08-02 10:18 ` [ 35/39] [SCSI] zfcp: status read buffers on first adapter open with link down Greg Kroah-Hartman
2013-08-02 10:18 ` [ 36/39] s390: move dummy io_remap_pfn_range() to asm/pgtable.h Greg Kroah-Hartman
2013-08-02 10:18 ` [ 37/39] virtio: support unlocked queue poll Greg Kroah-Hartman
2013-08-02 10:18 ` [ 38/39] virtio_net: fix race in RX VQ processing Greg Kroah-Hartman
2013-08-02 10:18 ` [ 39/39] mm/memory-hotplug: fix lowmem count overflow when offline pages Greg Kroah-Hartman
2013-08-02 19:58 ` [ 00/39] 3.4.56-stable review Shuah Khan
2013-08-03 2:38 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130802101500.926744602@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=zerochaos@gentoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox