From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, James Stone <jamesmstone@gmail.com>,
Clemens Ladisch <clemens@ladisch.de>,
Takashi Iwai <tiwai@suse.de>
Subject: [ 26/60] ALSA: usb-audio: do not trust too-big wMaxPacketSize values
Date: Mon, 12 Aug 2013 23:33:53 -0700 [thread overview]
Message-ID: <20130813063335.671528526@linuxfoundation.org> (raw)
In-Reply-To: <20130813063331.950321483@linuxfoundation.org>
3.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Clemens Ladisch <clemens@ladisch.de>
commit 57e6dae1087bbaa6b33d3dd8a8e90b63888939a3 upstream.
The driver used to assume that the streaming endpoint's wMaxPacketSize
value would be an indication of how much data the endpoint expects or
sends, and compute the number of packets per URB using this value.
However, the Focusrite Scarlett 2i4 declares a value of 1024 bytes,
while only about 88 or 44 bytes are be actually used. This discrepancy
would result in URBs with far too few packets, which would not work
correctly on the EHCI driver.
To get correct URBs, use wMaxPacketSize only as an upper limit on the
packet size.
Reported-by: James Stone <jamesmstone@gmail.com>
Tested-by: James Stone <jamesmstone@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
sound/usb/endpoint.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -591,17 +591,16 @@ static int data_ep_set_params(struct snd
ep->stride = frame_bits >> 3;
ep->silence_value = pcm_format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0;
- /* calculate max. frequency */
- if (ep->maxpacksize) {
+ /* assume max. frequency is 25% higher than nominal */
+ ep->freqmax = ep->freqn + (ep->freqn >> 2);
+ maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3))
+ >> (16 - ep->datainterval);
+ /* but wMaxPacketSize might reduce this */
+ if (ep->maxpacksize && ep->maxpacksize < maxsize) {
/* whatever fits into a max. size packet */
maxsize = ep->maxpacksize;
ep->freqmax = (maxsize / (frame_bits >> 3))
<< (16 - ep->datainterval);
- } else {
- /* no max. packet size: just take 25% higher than nominal */
- ep->freqmax = ep->freqn + (ep->freqn >> 2);
- maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3))
- >> (16 - ep->datainterval);
}
if (ep->fill_max)
next prev parent reply other threads:[~2013-08-13 6:33 UTC|newest]
Thread overview: 65+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-08-13 6:33 [ 00/60] 3.10.7-stable review Greg Kroah-Hartman
2013-08-13 6:33 ` [ 01/60] SCSI: Dont attempt to send extended INQUIRY command if skip_vpd_pages is set Greg Kroah-Hartman
2013-08-13 6:33 ` [ 02/60] SCSI: megaraid_sas: megaraid_sas driver init fails in kdump kernel Greg Kroah-Hartman
2013-08-13 6:33 ` [ 03/60] virtio-scsi: Fix virtqueue affinity setup Greg Kroah-Hartman
2013-08-13 6:33 ` [ 04/60] powerpc: On POWERNV enable PPC_DENORMALISATION by default Greg Kroah-Hartman
2013-08-13 6:33 ` [ 05/60] powerpc: Fix hypervisor facility unavaliable vector number Greg Kroah-Hartman
2013-08-13 6:33 ` [ 06/60] powerpc: Rework setting up H/FSCR bit definitions Greg Kroah-Hartman
2013-08-13 6:33 ` [ 07/60] powerpc: Fix context switch DSCR on POWER8 Greg Kroah-Hartman
2013-08-13 6:33 ` [ 08/60] powerpc: Save the TAR register earlier Greg Kroah-Hartman
2013-08-13 6:33 ` [ 09/60] powerpc/tm: Fix context switching TAR, PPR and DSCR SPRs Greg Kroah-Hartman
2013-08-13 6:33 ` [ 10/60] ext4: destroy ext4_es_cachep on module unload Greg Kroah-Hartman
2013-08-13 6:33 ` [ 11/60] ext4: make sure group number is bumped after a inode allocation race Greg Kroah-Hartman
2013-08-13 6:33 ` [ 12/60] ext4: fix retry handling in ext4_ext_truncate() Greg Kroah-Hartman
2013-08-13 6:33 ` [ 13/60] regmap: cache: Make sure to sync the last register in a block Greg Kroah-Hartman
2013-08-13 6:33 ` [ 14/60] regmap: Add missing header for !CONFIG_REGMAP stubs Greg Kroah-Hartman
2013-08-13 6:33 ` [ 15/60] hwmon: (adt7470) Fix incorrect return code check Greg Kroah-Hartman
2013-08-13 6:33 ` [ 16/60] staging: zcache: fix "zcache=" kernel parameter Greg Kroah-Hartman
2013-08-13 6:33 ` [ 17/60] media: em28xx: fix assignment of the eeprom data Greg Kroah-Hartman
2013-08-13 6:33 ` [ 18/60] i2c: i2c-mxs: Use DMA mode even for small transfers Greg Kroah-Hartman
2013-08-13 6:33 ` [ 19/60] cpufreq: loongson2: fix regression related to clock management Greg Kroah-Hartman
2013-08-13 6:33 ` [ 20/60] cpufreq: rename ignore_nice as ignore_nice_load Greg Kroah-Hartman
2013-08-13 6:33 ` [ 21/60] ACPI / PM: Walk physical_node_list under physical_node_lock Greg Kroah-Hartman
2013-08-13 6:33 ` [ 22/60] tracing: Fix fields of struct trace_iterator that are zeroed by mistake Greg Kroah-Hartman
2013-08-13 6:33 ` [ 23/60] tracing: Make TRACE_ITER_STOP_ON_FREE stop the correct buffer Greg Kroah-Hartman
2013-08-13 6:33 ` [ 24/60] tracing: Use flag buffer_disabled for irqsoff tracer Greg Kroah-Hartman
2013-08-13 6:33 ` [ 25/60] tracing: Fix reset of time stamps during trace_clock changes Greg Kroah-Hartman
2013-08-13 6:33 ` Greg Kroah-Hartman [this message]
2013-08-13 6:33 ` [ 27/60] ALSA: 6fire: fix DMA issues with URB transfer_buffer usage Greg Kroah-Hartman
2013-08-13 6:33 ` [ 28/60] Btrfs: release both paths before logging dir/changed extents Greg Kroah-Hartman
2013-08-13 6:33 ` [ 29/60] LOCKD: Dont call utsname()->nodename from nlmclnt_setlockargs Greg Kroah-Hartman
2013-08-13 6:33 ` [ 30/60] SUNRPC: Dont auto-disconnect from the local rpcbind socket Greg Kroah-Hartman
2013-08-13 6:33 ` [ 31/60] SUNRPC: If the rpcbind channel is disconnected, fail the call to unregister Greg Kroah-Hartman
2013-08-13 6:33 ` [ 32/60] virtio/console: Quit from splice_write if pipe->nrbufs is 0 Greg Kroah-Hartman
2013-08-13 6:34 ` [ 33/60] virtio/console: Add pipe_lock/unlock for splice_write Greg Kroah-Hartman
2013-08-13 6:34 ` [ 34/60] virtio: console: fix race with port unplug and open/close Greg Kroah-Hartman
2013-08-13 6:34 ` [ 35/60] virtio: console: fix race in port_fops_open() and port unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 36/60] virtio: console: clean up port data immediately at time of unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 37/60] virtio: console: fix raising SIGIO after port unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 38/60] virtio: console: return -ENODEV on all read operations after unplug Greg Kroah-Hartman
2013-08-13 6:34 ` [ 39/60] drm/cirrus: Invalidate page tables when pinning a BO Greg Kroah-Hartman
2013-08-13 6:34 ` [ 40/60] drm/mgag200: " Greg Kroah-Hartman
2013-08-13 6:34 ` [ 41/60] drm/ast: invalidate " Greg Kroah-Hartman
2013-08-13 6:34 ` [ 42/60] drm: Dont pass negative delta to ktime_sub_ns() Greg Kroah-Hartman
2013-08-13 6:34 ` [ 43/60] drm/radeon: select audio dto based on encoder id for DCE3 Greg Kroah-Hartman
2013-08-13 6:34 ` [ 44/60] drm/radeon: stop sending invalid UVD destroy msg Greg Kroah-Hartman
2013-08-13 6:34 ` [ 45/60] ext4: allow the mount options nodelalloc and data=journal Greg Kroah-Hartman
2013-08-13 6:34 ` [ 46/60] ext4: fix mount/remount error messages for incompatible mount options Greg Kroah-Hartman
2013-08-13 6:34 ` [ 47/60] ext4: flush the extent status cache during EXT4_IOC_SWAP_BOOT Greg Kroah-Hartman
2013-08-13 6:34 ` [ 48/60] cifs: extend the buffer length enought for sprintf() using Greg Kroah-Hartman
2013-08-13 6:34 ` [ 49/60] cifs: dont instantiate new dentries in readdir for inodes that need to be revalidated immediately Greg Kroah-Hartman
2013-08-13 6:34 ` [ 50/60] zram: allow request end to coincide with disksize Greg Kroah-Hartman
2013-08-13 6:34 ` [ 51/60] usb: core: dont try to reset_device() a port that got just disconnected Greg Kroah-Hartman
2013-08-13 6:34 ` [ 52/60] debugfs: debugfs_remove_recursive() must not rely on list_empty(d_subdirs) Greg Kroah-Hartman
2013-08-13 6:34 ` [ 53/60] reiserfs: fix deadlock in umount Greg Kroah-Hartman
2013-08-13 6:34 ` [ 54/60] drm/i915: initialize gt_lock early with other spin locks Greg Kroah-Hartman
2013-08-13 6:34 ` [ 55/60] drm/radeon: fix halting UVD Greg Kroah-Hartman
2013-08-13 6:34 ` [ 56/60] drm/radeon: only save UVD bo when we have open handles Greg Kroah-Hartman
2013-08-13 6:34 ` [ 57/60] drm/radeon: always program the MC on startup Greg Kroah-Hartman
2013-08-13 6:34 ` [ 58/60] SCSI: nsp32: use mdelay instead of large udelay constants Greg Kroah-Hartman
2013-08-13 6:34 ` [ 59/60] mtd: omap2: allow bulding as a module Greg Kroah-Hartman
2013-08-13 6:34 ` [ 60/60] MIPS: Expose missing pci_io{map,unmap} declarations Greg Kroah-Hartman
2013-08-13 11:57 ` [ 00/60] 3.10.7-stable review Guenter Roeck
2013-08-13 17:57 ` Greg Kroah-Hartman
2013-08-13 17:18 ` Shuah Khan
2013-08-13 17:57 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130813063335.671528526@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=clemens@ladisch.de \
--cc=jamesmstone@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox