linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mike Snitzer <snitzer@redhat.com>
To: Joe Jin <joe.jin@oracle.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>,
	device-mapper development <dm-devel@redhat.com>,
	Alasdair Kergon <agk@redhat.com>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH] dm: allow error target to replace either bio-based and request-based targets
Date: Thu, 22 Aug 2013 20:17:51 -0400	[thread overview]
Message-ID: <20130823001750.GA29366@redhat.com> (raw)
In-Reply-To: <20130822201900.GB22556@redhat.com>

On Thu, Aug 22 2013 at  4:19pm -0400,
Mike Snitzer <snitzer@redhat.com> wrote:

> Hi Joe,
> 
> Unfortunately this isn't going to work properly.  Mikulas suggested a
> new "error-rq" target.
> 
> I do like the idea of a single error target that is hybrid (supports
> both bio-based and request-based) but the DM core would need to be
> updated to support this.
> 
> Specifically, we'd need to check if the device (and active table) is
> already bio-based or request-based and select the appropriate type.  If
> it is a new device, default to selecting bio-based.
> 
> There are some wrappers and other logic thoughout DM core that will need
> auditing too.

Here is a patch that should work for your needs (I tested it to work
with 'dmsetup wipe_table' on both request-based and bio-based devices):

From: Mike Snitzer <snitzer@redhat.com>
Date: Thu, 22 Aug 2013 18:21:38 -0400
Subject: [PATCH] dm: allow error target to replace either bio-based and request-based targets

In may be useful to switch a request-based table to the "error" target.
Enhance the DM core to allow a single hybrid target to be capable of
handling either bios or requests.

Add a request-based (.map_rq) member to the error target_type and train
dm_table_set_type() to prefer the md's established type (request-based
or bio-based).  If the md doesn't have an established type default to
making the hybrid target bio-based.

Cc: Joe Jin <joe.jin@oracle.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
---
 drivers/md/dm-table.c  |   18 +++++++++++++++++-
 drivers/md/dm-target.c |    9 ++++++++-
 drivers/md/dm.h        |   11 +++++++++++
 3 files changed, 36 insertions(+), 2 deletions(-)

Index: linux/drivers/md/dm-table.c
===================================================================
--- linux.orig/drivers/md/dm-table.c
+++ linux/drivers/md/dm-table.c
@@ -864,10 +864,26 @@ static int dm_table_set_type(struct dm_t
 	struct dm_target *tgt;
 	struct dm_dev_internal *dd;
 	struct list_head *devices;
+	unsigned live_md_type;
+
+	dm_lock_md_type(t->md);
+	live_md_type = dm_get_md_type(t->md);
+	dm_unlock_md_type(t->md);
 
 	for (i = 0; i < t->num_targets; i++) {
 		tgt = t->targets + i;
-		if (dm_target_request_based(tgt))
+		if (dm_target_hybrid(tgt)) {
+			switch (live_md_type) {
+			case DM_TYPE_NONE:
+			case DM_TYPE_BIO_BASED:
+				bio_based = 1;
+				break;
+			case DM_TYPE_REQUEST_BASED:
+				request_based = 1;
+				break;
+			}
+		}
+		else if (dm_target_request_based(tgt))
 			request_based = 1;
 		else
 			bio_based = 1;
Index: linux/drivers/md/dm-target.c
===================================================================
--- linux.orig/drivers/md/dm-target.c
+++ linux/drivers/md/dm-target.c
@@ -131,12 +131,19 @@ static int io_err_map(struct dm_target *
 	return -EIO;
 }
 
+static int io_err_map_rq(struct dm_target *ti, struct request *clone,
+			 union map_info *map_context)
+{
+	return -EIO;
+}
+
 static struct target_type error_target = {
 	.name = "error",
-	.version = {1, 1, 0},
+	.version = {1, 2, 0},
 	.ctr  = io_err_ctr,
 	.dtr  = io_err_dtr,
 	.map  = io_err_map,
+	.map_rq = io_err_map_rq,
 };
 
 int __init dm_target_init(void)
Index: linux/drivers/md/dm.h
===================================================================
--- linux.orig/drivers/md/dm.h
+++ linux/drivers/md/dm.h
@@ -91,10 +91,21 @@ int dm_setup_md_queue(struct mapped_devi
 #define dm_target_is_valid(t) ((t)->table)
 
 /*
+ * To check whether the target type is bio-based or not (request-based).
+ */
+#define dm_target_bio_based(t) ((t)->type->map != NULL)
+
+/*
  * To check whether the target type is request-based or not (bio-based).
  */
 #define dm_target_request_based(t) ((t)->type->map_rq != NULL)
 
+/*
+ * To check whether the target type is a hybrid (capable of being
+ * either request-based or bio-based).
+ */
+#define dm_target_hybrid(t) (dm_target_bio_based(t) && dm_target_request_based(t))
+
 /*-----------------------------------------------------------------
  * A registry of target types.
  *---------------------------------------------------------------*/

  reply	other threads:[~2013-08-23  0:17 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-21 14:18 [PATCH v2] dm ioctl: allow change device target type to error Joe Jin
2013-08-21 14:48 ` [dm-devel] " Mikulas Patocka
2013-08-21 15:06   ` Mike Snitzer
2013-08-22  2:40     ` Joe Jin
2013-08-22 20:10       ` Mike Snitzer
2013-08-22  2:50   ` [dm-devel] " Joe Jin
2013-08-22 20:19     ` Mike Snitzer
2013-08-23  0:17       ` Mike Snitzer [this message]
2013-08-23  1:06         ` [PATCH] dm: allow error target to replace either bio-based and request-based targets Joe Jin
2013-08-23  3:14         ` [dm-devel] " Jun'ichi Nomura
2013-08-23 10:01           ` Mike Snitzer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130823001750.GA29366@redhat.com \
    --to=snitzer@redhat.com \
    --cc=agk@redhat.com \
    --cc=dm-devel@redhat.com \
    --cc=joe.jin@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mpatocka@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).