public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Wei Hu <wei@aristanetworks.com>
Cc: Clemens Ladisch <clemens@ladisch.de>,
	lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org
Subject: Re: [lm-sensors] [PATCH] hwmon: (k10temp) Add support for Fam16h (Kabini)
Date: Fri, 23 Aug 2013 12:58:11 -0700	[thread overview]
Message-ID: <20130823195810.GA12208@roeck-us.net> (raw)
In-Reply-To: <1377279498-2868-1-git-send-email-wei@aristanetworks.com>

On Fri, Aug 23, 2013 at 10:38:18AM -0700, Wei Hu wrote:
> The temperature reporting interface stays the same, so we just
> add the PCI-ID to the list.
> 
> Verified on AMD Olive Hill.

The Signed-off-by: statement is missing. I can not apply the patch without it.

Guenter

> ---
>  Documentation/hwmon/k10temp |    1 +
>  drivers/hwmon/Kconfig       |    4 ++--
>  drivers/hwmon/k10temp.c     |    3 ++-
>  3 files changed, 5 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp
> index 90956b6..4dfdc8f 100644
> --- a/Documentation/hwmon/k10temp
> +++ b/Documentation/hwmon/k10temp
> @@ -12,6 +12,7 @@ Supported chips:
>  * AMD Family 12h processors: "Llano" (E2/A4/A6/A8-Series)
>  * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
>  * AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity"
> +* AMD Family 16h processors: "Kabini"
>  
>    Prefix: 'k10temp'
>    Addresses scanned: PCI space
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index e989f7f..1e27838 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -296,8 +296,8 @@ config SENSORS_K10TEMP
>  	  If you say yes here you get support for the temperature
>  	  sensor(s) inside your CPU. Supported are later revisions of
>  	  the AMD Family 10h and all revisions of the AMD Family 11h,
> -	  12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
> -	  microarchitectures.
> +	  12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
> +	  16h (Kabini) microarchitectures.
>  
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called k10temp.
> diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
> index e3b037c..e633856 100644
> --- a/drivers/hwmon/k10temp.c
> +++ b/drivers/hwmon/k10temp.c
> @@ -1,5 +1,5 @@
>  /*
> - * k10temp.c - AMD Family 10h/11h/12h/14h/15h processor hardware monitoring
> + * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h processor hardware monitoring
>   *
>   * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
>   *
> @@ -211,6 +211,7 @@ static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = {
>  	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
>  	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
>  	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
> +	{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(pci, k10temp_id_table);
> -- 
> 1.7.4.4
> 
> 
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
> 

  parent reply	other threads:[~2013-08-23 19:58 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-23 17:38 [PATCH] hwmon: (k10temp) Add support for Fam16h (Kabini) Wei Hu
2013-08-23 18:25 ` Clemens Ladisch
2013-08-23 19:58 ` Guenter Roeck [this message]
2013-08-23 20:14   ` Wei Hu
2013-08-23 20:47     ` [lm-sensors] " Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130823195810.GA12208@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=clemens@ladisch.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lm-sensors@lm-sensors.org \
    --cc=wei@aristanetworks.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox