From: Ingo Molnar <mingo@kernel.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Andrew Morton <akpm@linux-foundation.org>
Subject: [GIT PULL] x86/apic changes for v3.12
Date: Tue, 3 Sep 2013 16:22:17 +0200 [thread overview]
Message-ID: <20130903142217.GA27791@gmail.com> (raw)
Linus,
Please pull the latest x86-apic-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86-apic-for-linus
HEAD: 25aa2957973d361081ac6c8b6e5a0d9d7a83fef6 x86/ioapic: Check attr against the previous setting when programmed more than once
Smaller fixes.
Thanks,
Ingo
------------------>
Liu Ping Fan (1):
x86/ioapic: Check attr against the previous setting when programmed more than once
Tang Chen (1):
x86/acpi: Fix incorrect sanity check in acpi_register_lapic()
Yoshihiro YUNOMAE (1):
x86/ioapic/kcrash: Prevent crash_kexec() from deadlocking on ioapic_lock
arch/x86/include/asm/apic.h | 2 ++
arch/x86/kernel/acpi/boot.c | 7 +++++--
arch/x86/kernel/apic/io_apic.c | 14 +++++++++++---
arch/x86/kernel/crash.c | 4 +++-
4 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index f8119b5..1d2091a 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -715,4 +715,6 @@ static inline void exiting_ack_irq(void)
ack_APIC_irq();
}
+extern void ioapic_zap_locks(void);
+
#endif /* _ASM_X86_APIC_H */
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 2627a81..81aa73b 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -199,7 +199,7 @@ static void acpi_register_lapic(int id, u8 enabled)
{
unsigned int ver = 0;
- if (id >= (MAX_LOCAL_APIC-1)) {
+ if (id >= MAX_LOCAL_APIC) {
printk(KERN_INFO PREFIX "skipped apicid that is too big\n");
return;
}
@@ -1120,6 +1120,7 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
int ioapic;
int ioapic_pin;
struct io_apic_irq_attr irq_attr;
+ int ret;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
@@ -1149,7 +1150,9 @@ int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
+ ret = io_apic_set_pci_routing(dev, gsi_to_irq(gsi), &irq_attr);
+ if (ret < 0)
+ gsi = INT_MIN;
return gsi;
}
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 9ed796c..e63a5bd 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -1534,6 +1534,11 @@ void intel_ir_io_apic_print_entries(unsigned int apic,
}
}
+void ioapic_zap_locks(void)
+{
+ raw_spin_lock_init(&ioapic_lock);
+}
+
__apicdebuginit(void) print_IO_APIC(int ioapic_idx)
{
union IO_APIC_reg_00 reg_00;
@@ -3375,12 +3380,15 @@ int io_apic_setup_irq_pin_once(unsigned int irq, int node,
{
unsigned int ioapic_idx = attr->ioapic, pin = attr->ioapic_pin;
int ret;
+ struct IO_APIC_route_entry orig_entry;
/* Avoid redundant programming */
if (test_bit(pin, ioapics[ioapic_idx].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mpc_ioapic_id(ioapic_idx), pin);
- return 0;
+ pr_debug("Pin %d-%d already programmed\n", mpc_ioapic_id(ioapic_idx), pin);
+ orig_entry = ioapic_read_entry(attr->ioapic, pin);
+ if (attr->trigger == orig_entry.trigger && attr->polarity == orig_entry.polarity)
+ return 0;
+ return -EBUSY;
}
ret = io_apic_setup_irq_pin(irq, node, attr);
if (!ret)
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index 74467fe..e0e0841 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -128,7 +128,9 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
cpu_emergency_svm_disable();
lapic_shutdown();
-#if defined(CONFIG_X86_IO_APIC)
+#ifdef CONFIG_X86_IO_APIC
+ /* Prevent crash_kexec() from deadlocking on ioapic_lock. */
+ ioapic_zap_locks();
disable_IO_APIC();
#endif
#ifdef CONFIG_HPET_TIMER
reply other threads:[~2013-09-03 14:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130903142217.GA27791@gmail.com \
--to=mingo@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox