[PATCH v2 0/8] Several NXP TDA998x patches

[PATCH v2 0/8] Several NXP TDA998x patches

[Sebastian Hesselbarth]

This patch set picks up several patches sent during the past months
related with NXP TDA998x HDMI transmitter driver. The patches have
been tested on Marvell Dove (Armada DRM) on several HDMI and DVI modes
with audio playing on S/PDIF.

I bumped all patches to v2, although only patches 2, 5, and 6 have
changed. I also fixed a typo in commit line of patch 8. As Darren
Etheridge already gave his Tested-by and tilcdc related patches have
not changed, I added it to all patches for v2, too.

I have not added Russell King's Tested-by, as I hope he will have a
close look at what I changed after his review comments.

Darren Etheridge (1):
  drm/tilcdc fixup mode to workaround sync for tda998x

Russell King (5):
  drm/i2c: tda998x: fix EDID reading on TDA19988 devices
  drm/i2c: tda998x: ensure VIP output mux is properly set
  drm/i2c: tda998x: fix npix/nline programming
  drm/i2c: tda998x: prepare for video input configuration
  drm/i2c: tda998x: add video and audio input configuration

Sebastian Hesselbarth (2):
  drm/i2c: tda998x: fix sync generation and calculation
  drm/i2c: tda998x: prepare for broken sync workaround

 drivers/gpu/drm/i2c/tda998x_drv.c     |  481 +++++++++++++++++++++++++++------
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c  |    7 +-
 drivers/gpu/drm/tilcdc/tilcdc_slave.c |   27 +-
 include/drm/i2c/tda998x.h             |   30 ++
 4 files changed, 467 insertions(+), 78 deletions(-)
 create mode 100644 include/drm/i2c/tda998x.h

---
Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
-- 
1.7.10.4

[PATCH v2 1/8] drm/i2c: tda998x: fix EDID reading on TDA19988 devices

[Sebastian Hesselbarth]

From: Russell King <rmk+kernel@arm.linux.org.uk>

TDA19988 devices need their RAM enabled in order to read EDID
information.  Add support for this.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/gpu/drm/i2c/tda998x_drv.c |   14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index e68b58a..d71c408 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -229,6 +229,8 @@ struct tda998x_priv {
 
 /* Page 12h: HDCP and OTP */
 #define REG_TX3                   REG(0x12, 0x9a)     /* read/write */
+#define REG_TX4                   REG(0x12, 0x9b)     /* read/write */
+# define TX4_PD_RAM               (1 << 1)
 #define REG_TX33                  REG(0x12, 0xb8)     /* read/write */
 # define TX33_HDMI                (1 << 1)
 
@@ -673,6 +675,7 @@ read_edid_block(struct drm_encoder *encoder, uint8_t *buf, int blk)
 static uint8_t *
 do_get_edid(struct drm_encoder *encoder)
 {
+	struct tda998x_priv *priv = to_tda998x_priv(encoder);
 	int j = 0, valid_extensions = 0;
 	uint8_t *block, *new;
 	bool print_bad_edid = drm_debug & DRM_UT_KMS;
@@ -680,6 +683,9 @@ do_get_edid(struct drm_encoder *encoder)
 	if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
 		return NULL;
 
+	if (priv->rev == TDA19988)
+		reg_clear(encoder, REG_TX4, TX4_PD_RAM);
+
 	/* base block fetch */
 	if (read_edid_block(encoder, block, 0))
 		goto fail;
@@ -689,7 +695,7 @@ do_get_edid(struct drm_encoder *encoder)
 
 	/* if there's no extensions, we're done */
 	if (block[0x7e] == 0)
-		return block;
+		goto done;
 
 	new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL);
 	if (!new)
@@ -716,9 +722,15 @@ do_get_edid(struct drm_encoder *encoder)
 		block = new;
 	}
 
+done:
+	if (priv->rev == TDA19988)
+		reg_set(encoder, REG_TX4, TX4_PD_RAM);
+
 	return block;
 
 fail:
+	if (priv->rev == TDA19988)
+		reg_set(encoder, REG_TX4, TX4_PD_RAM);
 	dev_warn(encoder->dev->dev, "failed to read EDID\n");
 	kfree(block);
 	return NULL;
-- 
1.7.10.4

[PATCH v2 2/8] drm/i2c: tda998x: ensure VIP output mux is properly set

[Sebastian Hesselbarth]

From: Russell King <rmk+kernel@arm.linux.org.uk>

When switching between various drivers for this device, it's possible
that some critical registers are left containing values which affect
the device operation.  One such case encountered is the VIP output
mux register.  This defaults to 0x24 on powerup, but other drivers may
set this to 0x12.  This results in incorrect colours.

Fix this by ensuring that the register is always set to the power on
default setting.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Changelog:
v1->v2:
- move reg_write to tda998x_reset as last patch was based on an
  old version (Reported by Russell King)

Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/gpu/drm/i2c/tda998x_drv.c |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index d71c408..cb9b13a 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -110,6 +110,7 @@ struct tda998x_priv {
 #define REG_VIP_CNTRL_5           REG(0x00, 0x25)     /* write */
 # define VIP_CNTRL_5_CKCASE       (1 << 0)
 # define VIP_CNTRL_5_SP_CNT(x)    (((x) & 3) << 1)
+#define REG_MUX_VP_VIP_OUT        REG(0x00, 0x27)     /* read/write */
 #define REG_MAT_CONTRL            REG(0x00, 0x80)     /* write */
 # define MAT_CONTRL_MAT_SC(x)     (((x) & 3) << 0)
 # define MAT_CONTRL_MAT_BP        (1 << 2)
@@ -415,6 +416,9 @@ tda998x_reset(struct drm_encoder *encoder)
 	reg_write(encoder, REG_PLL_SCGR1,    0x5b);
 	reg_write(encoder, REG_PLL_SCGR2,    0x00);
 	reg_write(encoder, REG_PLL_SCG2,     0x10);
+
+	/* Write the default value MUX register */
+	reg_write(encoder, REG_MUX_VP_VIP_OUT, 0x24);
 }
 
 /* DRM encoder functions */
-- 
1.7.10.4

[PATCH v2 3/8] drm/i2c: tda998x: fix npix/nline programming

[Sebastian Hesselbarth]

From: Russell King <rmk+kernel@arm.linux.org.uk>

The npix/nline registers are supposed to be programmed with the total
number of pixels/lines, not the displayed pixels/lines, and not minus
one either.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/gpu/drm/i2c/tda998x_drv.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index cb9b13a..a701411 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -587,8 +587,8 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
 		reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_H_TGL);
 
 	reg_write(encoder, REG_VIDFORMAT, 0x00);
-	reg_write16(encoder, REG_NPIX_MSB, mode->hdisplay - 1);
-	reg_write16(encoder, REG_NLINE_MSB, mode->vdisplay - 1);
+	reg_write16(encoder, REG_NPIX_MSB, mode->htotal);
+	reg_write16(encoder, REG_NLINE_MSB, mode->vtotal);
 	reg_write16(encoder, REG_VS_LINE_STRT_1_MSB, line_start);
 	reg_write16(encoder, REG_VS_LINE_END_1_MSB, line_end);
 	reg_write16(encoder, REG_VS_PIX_STRT_1_MSB, hs_start);
-- 
1.7.10.4

[PATCH v2 4/8] drm/i2c: tda998x: prepare for video input configuration

[Sebastian Hesselbarth]

From: Russell King <rmk+kernel@arm.linux.org.uk>

The video-input-port (VIP) is highly configurable. This prepares
current driver to allow to configure VIP configuration, as some
boards connect lcd controller and TDA998x "pin-swapped" and depend
on VIP to swap the pins by register configuration.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/gpu/drm/i2c/tda998x_drv.c |   16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index a701411..527d11b 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -32,6 +32,9 @@ struct tda998x_priv {
 	uint16_t rev;
 	uint8_t current_page;
 	int dpms;
+	u8 vip_cntrl_0;
+	u8 vip_cntrl_1;
+	u8 vip_cntrl_2;
 };
 
 #define to_tda998x_priv(x)  ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv)
@@ -448,12 +451,9 @@ tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
 		reg_write(encoder, REG_ENA_VP_1, 0xff);
 		reg_write(encoder, REG_ENA_VP_2, 0xff);
 		/* set muxing after enabling ports: */
-		reg_write(encoder, REG_VIP_CNTRL_0,
-				VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3));
-		reg_write(encoder, REG_VIP_CNTRL_1,
-				VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1));
-		reg_write(encoder, REG_VIP_CNTRL_2,
-				VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5));
+		reg_write(encoder, REG_VIP_CNTRL_0, priv->vip_cntrl_0);
+		reg_write(encoder, REG_VIP_CNTRL_1, priv->vip_cntrl_1);
+		reg_write(encoder, REG_VIP_CNTRL_2, priv->vip_cntrl_2);
 		break;
 	case DRM_MODE_DPMS_OFF:
 		/* disable audio and video ports */
@@ -823,6 +823,10 @@ tda998x_encoder_init(struct i2c_client *client,
 	if (!priv)
 		return -ENOMEM;
 
+	priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(2) | VIP_CNTRL_0_SWAP_B(3);
+	priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(0) | VIP_CNTRL_1_SWAP_D(1);
+	priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(4) | VIP_CNTRL_2_SWAP_F(5);
+
 	priv->current_page = 0;
 	priv->cec = i2c_new_dummy(client->adapter, 0x34);
 	priv->dpms = DRM_MODE_DPMS_OFF;
-- 
1.7.10.4

[PATCH v2 5/8] drm/i2c: tda998x: add video and audio input configuration

[Sebastian Hesselbarth]

From: Russell King <rmk+kernel@arm.linux.org.uk>

This patch adds tda998x specific parameters to allow it to be configured
for different boards using it. Also, this implements rudimentary audio
support for S/PDIF attached controllers.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
---
Changelog:
for v1:
- set AUDIO_DIV to SERCLK/16 for modes with pixclk >100MHz
- also calculate CTS
v1->v2:
- Remove CTS calculation as it isn't used in current TDA998x setup
  (Reported by Russell King)
- Remove debug left-over (Reported by Russell King)
- Use correct tda998x include (Reported by Russell King)

Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/gpu/drm/i2c/tda998x_drv.c |  268 +++++++++++++++++++++++++++++++++++--
 include/drm/i2c/tda998x.h         |   30 +++++
 2 files changed, 290 insertions(+), 8 deletions(-)
 create mode 100644 include/drm/i2c/tda998x.h

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 527d11b..2b64dfa 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -23,7 +23,7 @@
 #include <drm/drm_crtc_helper.h>
 #include <drm/drm_encoder_slave.h>
 #include <drm/drm_edid.h>
-
+#include <drm/i2c/tda998x.h>
 
 #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
 
@@ -32,9 +32,11 @@ struct tda998x_priv {
 	uint16_t rev;
 	uint8_t current_page;
 	int dpms;
+	bool is_hdmi_sink;
 	u8 vip_cntrl_0;
 	u8 vip_cntrl_1;
 	u8 vip_cntrl_2;
+	struct tda998x_encoder_params params;
 };
 
 #define to_tda998x_priv(x)  ((struct tda998x_priv *)to_encoder_slave(x)->slave_priv)
@@ -71,10 +73,13 @@ struct tda998x_priv {
 # define I2C_MASTER_DIS_MM        (1 << 0)
 # define I2C_MASTER_DIS_FILT      (1 << 1)
 # define I2C_MASTER_APP_STRT_LAT  (1 << 2)
+#define REG_FEAT_POWERDOWN        REG(0x00, 0x0e)     /* read/write */
+# define FEAT_POWERDOWN_SPDIF     (1 << 3)
 #define REG_INT_FLAGS_0           REG(0x00, 0x0f)     /* read/write */
 #define REG_INT_FLAGS_1           REG(0x00, 0x10)     /* read/write */
 #define REG_INT_FLAGS_2           REG(0x00, 0x11)     /* read/write */
 # define INT_FLAGS_2_EDID_BLK_RD  (1 << 1)
+#define REG_ENA_ACLK              REG(0x00, 0x16)     /* read/write */
 #define REG_ENA_VP_0              REG(0x00, 0x18)     /* read/write */
 #define REG_ENA_VP_1              REG(0x00, 0x19)     /* read/write */
 #define REG_ENA_VP_2              REG(0x00, 0x1a)     /* read/write */
@@ -113,6 +118,7 @@ struct tda998x_priv {
 #define REG_VIP_CNTRL_5           REG(0x00, 0x25)     /* write */
 # define VIP_CNTRL_5_CKCASE       (1 << 0)
 # define VIP_CNTRL_5_SP_CNT(x)    (((x) & 3) << 1)
+#define REG_MUX_AP                REG(0x00, 0x26)     /* read/write */
 #define REG_MUX_VP_VIP_OUT        REG(0x00, 0x27)     /* read/write */
 #define REG_MAT_CONTRL            REG(0x00, 0x80)     /* write */
 # define MAT_CONTRL_MAT_SC(x)     (((x) & 3) << 0)
@@ -175,6 +181,12 @@ struct tda998x_priv {
 # define HVF_CNTRL_1_PAD(x)       (((x) & 3) << 4)
 # define HVF_CNTRL_1_SEMI_PLANAR  (1 << 6)
 #define REG_RPT_CNTRL             REG(0x00, 0xf0)     /* write */
+#define REG_I2S_FORMAT            REG(0x00, 0xfc)     /* read/write */
+# define I2S_FORMAT(x)            (((x) & 3) << 0)
+#define REG_AIP_CLKSEL            REG(0x00, 0xfd)     /* write */
+# define AIP_CLKSEL_FS(x)         (((x) & 3) << 0)
+# define AIP_CLKSEL_CLK_POL(x)    (((x) & 1) << 2)
+# define AIP_CLKSEL_AIP(x)        (((x) & 7) << 3)
 
 
 /* Page 02h: PLL settings */
@@ -198,6 +210,12 @@ struct tda998x_priv {
 #define REG_PLL_SCGR1             REG(0x02, 0x09)     /* read/write */
 #define REG_PLL_SCGR2             REG(0x02, 0x0a)     /* read/write */
 #define REG_AUDIO_DIV             REG(0x02, 0x0e)     /* read/write */
+# define AUDIO_DIV_SERCLK_1       0
+# define AUDIO_DIV_SERCLK_2       1
+# define AUDIO_DIV_SERCLK_4       2
+# define AUDIO_DIV_SERCLK_8       3
+# define AUDIO_DIV_SERCLK_16      4
+# define AUDIO_DIV_SERCLK_32      5
 #define REG_SEL_CLK               REG(0x02, 0x11)     /* read/write */
 # define SEL_CLK_SEL_CLK1         (1 << 0)
 # define SEL_CLK_SEL_VRF_CLK(x)   (((x) & 3) << 1)
@@ -216,6 +234,11 @@ struct tda998x_priv {
 
 
 /* Page 10h: information frames and packets */
+#define REG_IF1_HB0               REG(0x10, 0x20)     /* read/write */
+#define REG_IF2_HB0               REG(0x10, 0x40)     /* read/write */
+#define REG_IF3_HB0               REG(0x10, 0x60)     /* read/write */
+#define REG_IF4_HB0               REG(0x10, 0x80)     /* read/write */
+#define REG_IF5_HB0               REG(0x10, 0xa0)     /* read/write */
 
 
 /* Page 11h: audio settings and content info packets */
@@ -225,10 +248,33 @@ struct tda998x_priv {
 # define AIP_CNTRL_0_LAYOUT       (1 << 2)
 # define AIP_CNTRL_0_ACR_MAN      (1 << 5)
 # define AIP_CNTRL_0_RST_CTS      (1 << 6)
+#define REG_CA_I2S                REG(0x11, 0x01)     /* read/write */
+# define CA_I2S_CA_I2S(x)         (((x) & 31) << 0)
+# define CA_I2S_HBR_CHSTAT        (1 << 6)
+#define REG_LATENCY_RD            REG(0x11, 0x04)     /* read/write */
+#define REG_ACR_CTS_0             REG(0x11, 0x05)     /* read/write */
+#define REG_ACR_CTS_1             REG(0x11, 0x06)     /* read/write */
+#define REG_ACR_CTS_2             REG(0x11, 0x07)     /* read/write */
+#define REG_ACR_N_0               REG(0x11, 0x08)     /* read/write */
+#define REG_ACR_N_1               REG(0x11, 0x09)     /* read/write */
+#define REG_ACR_N_2               REG(0x11, 0x0a)     /* read/write */
+#define REG_CTS_N                 REG(0x11, 0x0c)     /* read/write */
+# define CTS_N_K(x)               (((x) & 7) << 0)
+# define CTS_N_M(x)               (((x) & 3) << 4)
 #define REG_ENC_CNTRL             REG(0x11, 0x0d)     /* read/write */
 # define ENC_CNTRL_RST_ENC        (1 << 0)
 # define ENC_CNTRL_RST_SEL        (1 << 1)
 # define ENC_CNTRL_CTL_CODE(x)    (((x) & 3) << 2)
+#define REG_DIP_FLAGS             REG(0x11, 0x0e)     /* read/write */
+# define DIP_FLAGS_ACR            (1 << 0)
+# define DIP_FLAGS_GC             (1 << 1)
+#define REG_DIP_IF_FLAGS          REG(0x11, 0x0f)     /* read/write */
+# define DIP_IF_FLAGS_IF1         (1 << 1)
+# define DIP_IF_FLAGS_IF2         (1 << 2)
+# define DIP_IF_FLAGS_IF3         (1 << 3)
+# define DIP_IF_FLAGS_IF4         (1 << 4)
+# define DIP_IF_FLAGS_IF5         (1 << 5)
+#define REG_CH_STAT_B(x)          REG(0x11, 0x14 + (x)) /* read/write */
 
 
 /* Page 12h: HDCP and OTP */
@@ -344,6 +390,23 @@ fail:
 	return ret;
 }
 
+static void
+reg_write_range(struct drm_encoder *encoder, uint16_t reg, uint8_t *p, int cnt)
+{
+	struct i2c_client *client = drm_i2c_encoder_get_client(encoder);
+	uint8_t buf[cnt+1];
+	int ret;
+
+	buf[0] = REG2ADDR(reg);
+	memcpy(&buf[1], p, cnt);
+
+	set_page(encoder, reg);
+
+	ret = i2c_master_send(client, buf, cnt + 1);
+	if (ret < 0)
+		dev_err(&client->dev, "Error %d writing to 0x%x\n", ret, reg);
+}
+
 static uint8_t
 reg_read(struct drm_encoder *encoder, uint16_t reg)
 {
@@ -412,7 +475,7 @@ tda998x_reset(struct drm_encoder *encoder)
 	reg_write(encoder, REG_SERIALIZER,   0x00);
 	reg_write(encoder, REG_BUFFER_OUT,   0x00);
 	reg_write(encoder, REG_PLL_SCG1,     0x00);
-	reg_write(encoder, REG_AUDIO_DIV,    0x03);
+	reg_write(encoder, REG_AUDIO_DIV,    AUDIO_DIV_SERCLK_8);
 	reg_write(encoder, REG_SEL_CLK,      SEL_CLK_SEL_CLK1 | SEL_CLK_ENA_SC_CLK);
 	reg_write(encoder, REG_PLL_SCGN1,    0xfa);
 	reg_write(encoder, REG_PLL_SCGN2,    0x00);
@@ -424,11 +487,184 @@ tda998x_reset(struct drm_encoder *encoder)
 	reg_write(encoder, REG_MUX_VP_VIP_OUT, 0x24);
 }
 
+static uint8_t tda998x_cksum(uint8_t *buf, size_t bytes)
+{
+	uint8_t sum = 0;
+
+	while (bytes--)
+		sum += *buf++;
+	return (255 - sum) + 1;
+}
+
+#define HB(x) (x)
+#define PB(x) (HB(2) + 1 + (x))
+
+static void
+tda998x_write_if(struct drm_encoder *encoder, uint8_t bit, uint16_t addr,
+		 uint8_t *buf, size_t size)
+{
+	buf[PB(0)] = tda998x_cksum(buf, size);
+
+	reg_clear(encoder, REG_DIP_IF_FLAGS, bit);
+	reg_write_range(encoder, addr, buf, size);
+	reg_set(encoder, REG_DIP_IF_FLAGS, bit);
+}
+
+static void
+tda998x_write_aif(struct drm_encoder *encoder, struct tda998x_encoder_params *p)
+{
+	uint8_t buf[PB(5) + 1];
+
+	buf[HB(0)] = 0x84;
+	buf[HB(1)] = 0x01;
+	buf[HB(2)] = 10;
+	buf[PB(0)] = 0;
+	buf[PB(1)] = p->audio_frame[1] & 0x07; /* CC */
+	buf[PB(2)] = p->audio_frame[2] & 0x1c; /* SF */
+	buf[PB(4)] = p->audio_frame[4];
+	buf[PB(5)] = p->audio_frame[5] & 0xf8; /* DM_INH + LSV */
+
+	tda998x_write_if(encoder, DIP_IF_FLAGS_IF4, REG_IF4_HB0, buf,
+			 sizeof(buf));
+}
+
+static void
+tda998x_write_avi(struct drm_encoder *encoder, struct drm_display_mode *mode)
+{
+	uint8_t buf[PB(13) + 1];
+
+	memset(buf, 0, sizeof(buf));
+	buf[HB(0)] = 0x82;
+	buf[HB(1)] = 0x02;
+	buf[HB(2)] = 13;
+	buf[PB(4)] = drm_match_cea_mode(mode);
+
+	tda998x_write_if(encoder, DIP_IF_FLAGS_IF2, REG_IF2_HB0, buf,
+			 sizeof(buf));
+}
+
+static void tda998x_audio_mute(struct drm_encoder *encoder, bool on)
+{
+	if (on) {
+		reg_set(encoder, REG_SOFTRESET, SOFTRESET_AUDIO);
+		reg_clear(encoder, REG_SOFTRESET, SOFTRESET_AUDIO);
+		reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
+	} else {
+		reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
+	}
+}
+
+static void
+tda998x_configure_audio(struct drm_encoder *encoder,
+		struct drm_display_mode *mode, struct tda998x_encoder_params *p)
+{
+	uint8_t buf[6], clksel_aip, clksel_fs, ca_i2s, cts_n, adiv;
+	uint32_t n;
+
+	/* Enable audio ports */
+	reg_write(encoder, REG_ENA_AP, p->audio_cfg);
+	reg_write(encoder, REG_ENA_ACLK, p->audio_clk_cfg);
+
+	/* Set audio input source */
+	switch (p->audio_format) {
+	case AFMT_SPDIF:
+		reg_write(encoder, REG_MUX_AP, 0x40);
+		clksel_aip = AIP_CLKSEL_AIP(0);
+		/* FS64SPDIF */
+		clksel_fs = AIP_CLKSEL_FS(2);
+		cts_n = CTS_N_M(3) | CTS_N_K(3);
+		ca_i2s = 0;
+		break;
+
+	case AFMT_I2S:
+		reg_write(encoder, REG_MUX_AP, 0x64);
+		clksel_aip = AIP_CLKSEL_AIP(1);
+		/* ACLK */
+		clksel_fs = AIP_CLKSEL_FS(0);
+		cts_n = CTS_N_M(3) | CTS_N_K(3);
+		ca_i2s = CA_I2S_CA_I2S(0);
+		break;
+	}
+
+	reg_write(encoder, REG_AIP_CLKSEL, clksel_aip);
+	reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_LAYOUT);
+
+	/* Enable automatic CTS generation */
+	reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_ACR_MAN);
+	reg_write(encoder, REG_CTS_N, cts_n);
+
+	/*
+	 * Audio input somehow depends on HDMI line rate which is
+	 * related to pixclk. Testing showed that modes with pixclk
+	 * >100MHz need a larger divider while <40MHz need the default.
+	 * There is no detailed info in the datasheet, so we just
+	 * assume 100MHz requires larger divider.
+	 */
+	if (mode->clock > 100000)
+		adiv = AUDIO_DIV_SERCLK_16;
+	else
+		adiv = AUDIO_DIV_SERCLK_8;
+	reg_write(encoder, REG_AUDIO_DIV, adiv);
+
+	/*
+	 * This is the approximate value of N, which happens to be
+	 * the recommended values for non-coherent clocks.
+	 */
+	n = 128 * p->audio_sample_rate / 1000;
+
+	/* Write the CTS and N values */
+	buf[0] = 0x44;
+	buf[1] = 0x42;
+	buf[2] = 0x01;
+	buf[3] = n;
+	buf[4] = n >> 8;
+	buf[5] = n >> 16;
+	reg_write_range(encoder, REG_ACR_CTS_0, buf, 6);
+
+	/* Set CTS clock reference */
+	reg_write(encoder, REG_AIP_CLKSEL, clksel_aip | clksel_fs);
+
+	/* Reset CTS generator */
+	reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
+	reg_clear(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_CTS);
+
+	/* Write the channel status */
+	buf[0] = 0x04;
+	buf[1] = 0x00;
+	buf[2] = 0x00;
+	buf[3] = 0xf1;
+	reg_write_range(encoder, REG_CH_STAT_B(0), buf, 4);
+
+	tda998x_audio_mute(encoder, true);
+	mdelay(20);
+	tda998x_audio_mute(encoder, false);
+
+	/* Write the audio information packet */
+	tda998x_write_aif(encoder, p);
+}
+
 /* DRM encoder functions */
 
 static void
 tda998x_encoder_set_config(struct drm_encoder *encoder, void *params)
 {
+	struct tda998x_priv *priv = to_tda998x_priv(encoder);
+	struct tda998x_encoder_params *p = params;
+
+	priv->vip_cntrl_0 = VIP_CNTRL_0_SWAP_A(p->swap_a) |
+			    (p->mirr_a ? VIP_CNTRL_0_MIRR_A : 0) |
+			    VIP_CNTRL_0_SWAP_B(p->swap_b) |
+			    (p->mirr_b ? VIP_CNTRL_0_MIRR_B : 0);
+	priv->vip_cntrl_1 = VIP_CNTRL_1_SWAP_C(p->swap_c) |
+			    (p->mirr_c ? VIP_CNTRL_1_MIRR_C : 0) |
+			    VIP_CNTRL_1_SWAP_D(p->swap_d) |
+			    (p->mirr_d ? VIP_CNTRL_1_MIRR_D : 0);
+	priv->vip_cntrl_2 = VIP_CNTRL_2_SWAP_E(p->swap_e) |
+			    (p->mirr_e ? VIP_CNTRL_2_MIRR_E : 0) |
+			    VIP_CNTRL_2_SWAP_F(p->swap_f) |
+			    (p->mirr_f ? VIP_CNTRL_2_MIRR_F : 0);
+
+	priv->params = *p;
 }
 
 static void
@@ -445,8 +681,7 @@ tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
 
 	switch (mode) {
 	case DRM_MODE_DPMS_ON:
-		/* enable audio and video ports */
-		reg_write(encoder, REG_ENA_AP, 0xff);
+		/* enable video ports, audio will be enabled later */
 		reg_write(encoder, REG_ENA_VP_0, 0xff);
 		reg_write(encoder, REG_ENA_VP_1, 0xff);
 		reg_write(encoder, REG_ENA_VP_2, 0xff);
@@ -608,17 +843,32 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
 	reg_write16(encoder, REG_REFPIX_MSB, ref_pix);
 	reg_write16(encoder, REG_REFLINE_MSB, ref_line);
 
-	reg = TBG_CNTRL_1_VHX_EXT_DE |
-			TBG_CNTRL_1_VHX_EXT_HS |
-			TBG_CNTRL_1_VHX_EXT_VS |
-			TBG_CNTRL_1_DWIN_DIS | /* HDCP off */
+	reg = TBG_CNTRL_1_DWIN_DIS | /* HDCP off */
 			TBG_CNTRL_1_VH_TGL_2;
+	/*
+	 * It is questionable whether this is correct - the nxp driver
+	 * does not set VH_TGL_2 and the below for all display modes.
+	 */
 	if (mode->flags & (DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC))
 		reg |= TBG_CNTRL_1_VH_TGL_0;
 	reg_set(encoder, REG_TBG_CNTRL_1, reg);
 
 	/* must be last register set: */
 	reg_clear(encoder, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_ONCE);
+
+	/* Only setup the info frames if the sink is HDMI */
+	if (priv->is_hdmi_sink) {
+		/* We need to turn HDMI HDCP stuff on to get audio through */
+		reg_clear(encoder, REG_TBG_CNTRL_1, TBG_CNTRL_1_DWIN_DIS);
+		reg_write(encoder, REG_ENC_CNTRL, ENC_CNTRL_CTL_CODE(1));
+		reg_set(encoder, REG_TX33, TX33_HDMI);
+
+		tda998x_write_avi(encoder, adjusted_mode);
+
+		if (priv->params.audio_cfg)
+			tda998x_configure_audio(encoder, adjusted_mode,
+						&priv->params);
+	}
 }
 
 static enum drm_connector_status
@@ -744,12 +994,14 @@ static int
 tda998x_encoder_get_modes(struct drm_encoder *encoder,
 			 struct drm_connector *connector)
 {
+	struct tda998x_priv *priv = to_tda998x_priv(encoder);
 	struct edid *edid = (struct edid *)do_get_edid(encoder);
 	int n = 0;
 
 	if (edid) {
 		drm_mode_connector_update_edid_property(connector, edid);
 		n = drm_add_edid_modes(connector, edid);
+		priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
 		kfree(edid);
 	}
 
diff --git a/include/drm/i2c/tda998x.h b/include/drm/i2c/tda998x.h
new file mode 100644
index 0000000..3e419d9
--- /dev/null
+++ b/include/drm/i2c/tda998x.h
@@ -0,0 +1,30 @@
+#ifndef __DRM_I2C_TDA998X_H__
+#define __DRM_I2C_TDA998X_H__
+
+struct tda998x_encoder_params {
+	u8 swap_b:3;
+	u8 mirr_b:1;
+	u8 swap_a:3;
+	u8 mirr_a:1;
+	u8 swap_d:3;
+	u8 mirr_d:1;
+	u8 swap_c:3;
+	u8 mirr_c:1;
+	u8 swap_f:3;
+	u8 mirr_f:1;
+	u8 swap_e:3;
+	u8 mirr_e:1;
+
+	u8 audio_cfg;
+	u8 audio_clk_cfg;
+	u8 audio_frame[6];
+
+	enum {
+		AFMT_SPDIF,
+		AFMT_I2S
+	} audio_format;
+
+	unsigned audio_sample_rate;
+};
+
+#endif
-- 
1.7.10.4

Re: [PATCH v2 5/8] drm/i2c: tda998x: add video and audio input configuration

[Dave Airlie]

On Thu, Aug 15, 2013 at 5:43 AM, Sebastian Hesselbarth
<sebastian.hesselbarth@gmail.com> wrote:
> From: Russell King <rmk+kernel@arm.linux.org.uk>
>
> This patch adds tda998x specific parameters to allow it to be configured
> for different boards using it. Also, this implements rudimentary audio
> support for S/PDIF attached controllers.
>
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Tested-by: Darren Etheridge <detheridge@ti.com>
> ---

I've merged the series,

this one generates a warning though:
  CC [M]  drivers/gpu/drm/i2c/tda998x_drv.o
/home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:
In function ‘tda998x_encoder_mode_set’:
/home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:637:11:
warning: ‘clksel_fs’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
/home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:573:30:
note: ‘clksel_fs’ was declared here
/home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:637:11:
warning: ‘clksel_aip’ may be used uninitialized in this function
[-Wmaybe-uninitialized]
/home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:573:18:
note: ‘clksel_aip’ was declared here

It doesn't seem like a real problem, since the function is unlikely to
be called any way to make that case happen.

Dave.

Re: [PATCH v2 5/8] drm/i2c: tda998x: add video and audio input configuration

[Russell King - ARM Linux]

On Mon, Aug 19, 2013 at 09:23:17AM +1000, Dave Airlie wrote:
> On Thu, Aug 15, 2013 at 5:43 AM, Sebastian Hesselbarth
> <sebastian.hesselbarth@gmail.com> wrote:
> > From: Russell King <rmk+kernel@arm.linux.org.uk>
> >
> > This patch adds tda998x specific parameters to allow it to be configured
> > for different boards using it. Also, this implements rudimentary audio
> > support for S/PDIF attached controllers.
> >
> > Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> > Tested-by: Darren Etheridge <detheridge@ti.com>
> > ---
> 
> I've merged the series,

Thanks.

> this one generates a warning though:
>   CC [M]  drivers/gpu/drm/i2c/tda998x_drv.o
> /home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:
> In function ‘tda998x_encoder_mode_set’:
> /home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:637:11:
> warning: ‘clksel_fs’ may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> /home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:573:30:
> note: ‘clksel_fs’ was declared here
> /home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:637:11:
> warning: ‘clksel_aip’ may be used uninitialized in this function
> [-Wmaybe-uninitialized]
> /home/airlied/devel/kernel/drm-next/drivers/gpu/drm/i2c/tda998x_drv.c:573:18:
> note: ‘clksel_aip’ was declared here
> 
> It doesn't seem like a real problem, since the function is unlikely to
> be called any way to make that case happen.

Ok, I'll squash those warnings by a slight rearrangement of the code.

Re: [PATCH] drm/i2c: Fix broken TDA998x audio (was: Re: [PATCH v2 5/8] drm/i2c: tda998x: add video and audio input configuration)

[Russell King - ARM Linux]

On Wed, Aug 14, 2013 at 09:43:30PM +0200, Sebastian Hesselbarth wrote:
> From: Russell King <rmk+kernel@arm.linux.org.uk>
> 
> This patch adds tda998x specific parameters to allow it to be configured
> for different boards using it. Also, this implements rudimentary audio
> support for S/PDIF attached controllers.
> 
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> Tested-by: Darren Etheridge <detheridge@ti.com>
> ---

It looks like there's been a bug introduced in this patch (which wasn't
in my original).

> @@ -445,8 +681,7 @@ tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
>  
>  	switch (mode) {
>  	case DRM_MODE_DPMS_ON:
> -		/* enable audio and video ports */
> -		reg_write(encoder, REG_ENA_AP, 0xff);
> +		/* enable video ports, audio will be enabled later */
>  		reg_write(encoder, REG_ENA_VP_0, 0xff);
>  		reg_write(encoder, REG_ENA_VP_1, 0xff);
>  		reg_write(encoder, REG_ENA_VP_2, 0xff);

I also disabled the writing to REG_ENA_AP in the DPMS off path as well,
which clears this register.

That seems to be missing from this patch, and it means that when the
display is placed into DPMS-off mode, the audio inputs are disabled,
never to be re-enabled.  There is no need to disable the audio input
in DPMS-off mode.

8<=============
From: Russell King <rmk+kernel@arm.linux.org.uk>
Subject: [PATCH] drm/i2c: Fix broken TDA998x audio

In patch "drm/i2c: tda998x: add video and audio input configuration" in
its original version, disabling the audio input port was removed.  The
version which was submitted for merging had this change deleted, which
results in audio being non-functional.  Fix this by removing the write.
While here, update the comment too.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
--- 
 drivers/gpu/drm/i2c/tda998x_drv.c |    3 +--
 1 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 5742cfc..59878af 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -705,8 +705,7 @@ tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
 		reg_write(encoder, REG_VIP_CNTRL_2, priv->vip_cntrl_2);
 		break;
 	case DRM_MODE_DPMS_OFF:
-		/* disable audio and video ports */
-		reg_write(encoder, REG_ENA_AP, 0x00);
+		/* disable video ports */
 		reg_write(encoder, REG_ENA_VP_0, 0x00);
 		reg_write(encoder, REG_ENA_VP_1, 0x00);
 		reg_write(encoder, REG_ENA_VP_2, 0x00);

Re: [PATCH] drm/i2c: Fix broken TDA998x audio (was: Re: [PATCH v2 5/8] drm/i2c: tda998x: add video and audio input configuration)

[Russell King - ARM Linux]

Ping?

On Mon, Sep 02, 2013 at 03:50:57PM +0100, Russell King - ARM Linux wrote:
> On Wed, Aug 14, 2013 at 09:43:30PM +0200, Sebastian Hesselbarth wrote:
> > From: Russell King <rmk+kernel@arm.linux.org.uk>
> > 
> > This patch adds tda998x specific parameters to allow it to be configured
> > for different boards using it. Also, this implements rudimentary audio
> > support for S/PDIF attached controllers.
> > 
> > Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> > Tested-by: Darren Etheridge <detheridge@ti.com>
> > ---
> 
> It looks like there's been a bug introduced in this patch (which wasn't
> in my original).
> 
> > @@ -445,8 +681,7 @@ tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
> >  
> >  	switch (mode) {
> >  	case DRM_MODE_DPMS_ON:
> > -		/* enable audio and video ports */
> > -		reg_write(encoder, REG_ENA_AP, 0xff);
> > +		/* enable video ports, audio will be enabled later */
> >  		reg_write(encoder, REG_ENA_VP_0, 0xff);
> >  		reg_write(encoder, REG_ENA_VP_1, 0xff);
> >  		reg_write(encoder, REG_ENA_VP_2, 0xff);
> 
> I also disabled the writing to REG_ENA_AP in the DPMS off path as well,
> which clears this register.
> 
> That seems to be missing from this patch, and it means that when the
> display is placed into DPMS-off mode, the audio inputs are disabled,
> never to be re-enabled.  There is no need to disable the audio input
> in DPMS-off mode.
> 
> 8<=============
> From: Russell King <rmk+kernel@arm.linux.org.uk>
> Subject: [PATCH] drm/i2c: Fix broken TDA998x audio
> 
> In patch "drm/i2c: tda998x: add video and audio input configuration" in
> its original version, disabling the audio input port was removed.  The
> version which was submitted for merging had this change deleted, which
> results in audio being non-functional.  Fix this by removing the write.
> While here, update the comment too.
> 
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> --- 
>  drivers/gpu/drm/i2c/tda998x_drv.c |    3 +--
>  1 files changed, 1 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
> index 5742cfc..59878af 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -705,8 +705,7 @@ tda998x_encoder_dpms(struct drm_encoder *encoder, int mode)
>  		reg_write(encoder, REG_VIP_CNTRL_2, priv->vip_cntrl_2);
>  		break;
>  	case DRM_MODE_DPMS_OFF:
> -		/* disable audio and video ports */
> -		reg_write(encoder, REG_ENA_AP, 0x00);
> +		/* disable video ports */
>  		reg_write(encoder, REG_ENA_VP_0, 0x00);
>  		reg_write(encoder, REG_ENA_VP_1, 0x00);
>  		reg_write(encoder, REG_ENA_VP_2, 0x00);

[PATCH v2 6/8] drm/i2c: tda998x: fix sync generation and calculation

[Sebastian Hesselbarth]

This fixes the wrong sync generation and sync calculation of TDA998x
for HS/VS-based sync detection.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Darren Etheridge <detheridge@ti.com>
---
Changelog:
v1->v2:
- revert calculation of hs/de_pix_s/e (Reported by Russell King)

Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/gpu/drm/i2c/tda998x_drv.c |  181 +++++++++++++++++++++++--------------
 1 file changed, 115 insertions(+), 66 deletions(-)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 2b64dfa..92fcb3d 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -140,8 +140,12 @@ struct tda998x_priv {
 #define REG_VS_LINE_END_1_LSB     REG(0x00, 0xae)     /* write */
 #define REG_VS_PIX_END_1_MSB      REG(0x00, 0xaf)     /* write */
 #define REG_VS_PIX_END_1_LSB      REG(0x00, 0xb0)     /* write */
+#define REG_VS_LINE_STRT_2_MSB    REG(0x00, 0xb1)     /* write */
+#define REG_VS_LINE_STRT_2_LSB    REG(0x00, 0xb2)     /* write */
 #define REG_VS_PIX_STRT_2_MSB     REG(0x00, 0xb3)     /* write */
 #define REG_VS_PIX_STRT_2_LSB     REG(0x00, 0xb4)     /* write */
+#define REG_VS_LINE_END_2_MSB     REG(0x00, 0xb5)     /* write */
+#define REG_VS_LINE_END_2_LSB     REG(0x00, 0xb6)     /* write */
 #define REG_VS_PIX_END_2_MSB      REG(0x00, 0xb7)     /* write */
 #define REG_VS_PIX_END_2_LSB      REG(0x00, 0xb8)     /* write */
 #define REG_HS_PIX_START_MSB      REG(0x00, 0xb9)     /* write */
@@ -152,21 +156,29 @@ struct tda998x_priv {
 #define REG_VWIN_START_1_LSB      REG(0x00, 0xbe)     /* write */
 #define REG_VWIN_END_1_MSB        REG(0x00, 0xbf)     /* write */
 #define REG_VWIN_END_1_LSB        REG(0x00, 0xc0)     /* write */
+#define REG_VWIN_START_2_MSB      REG(0x00, 0xc1)     /* write */
+#define REG_VWIN_START_2_LSB      REG(0x00, 0xc2)     /* write */
+#define REG_VWIN_END_2_MSB        REG(0x00, 0xc3)     /* write */
+#define REG_VWIN_END_2_LSB        REG(0x00, 0xc4)     /* write */
 #define REG_DE_START_MSB          REG(0x00, 0xc5)     /* write */
 #define REG_DE_START_LSB          REG(0x00, 0xc6)     /* write */
 #define REG_DE_STOP_MSB           REG(0x00, 0xc7)     /* write */
 #define REG_DE_STOP_LSB           REG(0x00, 0xc8)     /* write */
 #define REG_TBG_CNTRL_0           REG(0x00, 0xca)     /* write */
+# define TBG_CNTRL_0_TOP_TGL      (1 << 0)
+# define TBG_CNTRL_0_TOP_SEL      (1 << 1)
+# define TBG_CNTRL_0_DE_EXT       (1 << 2)
+# define TBG_CNTRL_0_TOP_EXT      (1 << 3)
 # define TBG_CNTRL_0_FRAME_DIS    (1 << 5)
 # define TBG_CNTRL_0_SYNC_MTHD    (1 << 6)
 # define TBG_CNTRL_0_SYNC_ONCE    (1 << 7)
 #define REG_TBG_CNTRL_1           REG(0x00, 0xcb)     /* write */
-# define TBG_CNTRL_1_VH_TGL_0     (1 << 0)
-# define TBG_CNTRL_1_VH_TGL_1     (1 << 1)
-# define TBG_CNTRL_1_VH_TGL_2     (1 << 2)
-# define TBG_CNTRL_1_VHX_EXT_DE   (1 << 3)
-# define TBG_CNTRL_1_VHX_EXT_HS   (1 << 4)
-# define TBG_CNTRL_1_VHX_EXT_VS   (1 << 5)
+# define TBG_CNTRL_1_H_TGL        (1 << 0)
+# define TBG_CNTRL_1_V_TGL        (1 << 1)
+# define TBG_CNTRL_1_TGL_EN       (1 << 2)
+# define TBG_CNTRL_1_X_EXT        (1 << 3)
+# define TBG_CNTRL_1_H_EXT        (1 << 4)
+# define TBG_CNTRL_1_V_EXT        (1 << 5)
 # define TBG_CNTRL_1_DWIN_DIS     (1 << 6)
 #define REG_ENABLE_SPACE          REG(0x00, 0xd6)     /* write */
 #define REG_HVF_CNTRL_0           REG(0x00, 0xe4)     /* write */
@@ -735,43 +747,70 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
 			struct drm_display_mode *adjusted_mode)
 {
 	struct tda998x_priv *priv = to_tda998x_priv(encoder);
-	uint16_t hs_start, hs_end, line_start, line_end;
-	uint16_t vwin_start, vwin_end, de_start, de_end;
-	uint16_t ref_pix, ref_line, pix_start2;
+	uint16_t ref_pix, ref_line, n_pix, n_line;
+	uint16_t hs_pix_s, hs_pix_e;
+	uint16_t vs1_pix_s, vs1_pix_e, vs1_line_s, vs1_line_e;
+	uint16_t vs2_pix_s, vs2_pix_e, vs2_line_s, vs2_line_e;
+	uint16_t vwin1_line_s, vwin1_line_e;
+	uint16_t vwin2_line_s, vwin2_line_e;
+	uint16_t de_pix_s, de_pix_e;
 	uint8_t reg, div, rep;
 
-	hs_start   = mode->hsync_start - mode->hdisplay;
-	hs_end     = mode->hsync_end - mode->hdisplay;
-	line_start = 1;
-	line_end   = 1 + mode->vsync_end - mode->vsync_start;
-	vwin_start = mode->vtotal - mode->vsync_start;
-	vwin_end   = vwin_start + mode->vdisplay;
-	de_start   = mode->htotal - mode->hdisplay;
-	de_end     = mode->htotal;
-
-	pix_start2 = 0;
-	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
-		pix_start2 = (mode->htotal / 2) + hs_start;
-
-	/* TODO how is this value calculated?  It is 2 for all common
-	 * formats in the tables in out of tree nxp driver (assuming
-	 * I've properly deciphered their byzantine table system)
+	/*
+	 * Internally TDA998x is using ITU-R BT.656 style sync but
+	 * we get VESA style sync. TDA998x is using a reference pixel
+	 * relative to ITU to sync to the input frame and for output
+	 * sync generation. Currently, we are using reference detection
+	 * from HS/VS, i.e. REFPIX/REFLINE denote frame start sync point
+	 * which is position of rising VS with coincident rising HS.
+	 *
+	 * Now there is some issues to take care of:
+	 * - HDMI data islands require sync-before-active
+	 * - TDA998x register values must be > 0 to be enabled
+	 * - REFLINE needs an additional offset of +1
+	 * - REFPIX needs an addtional offset of +1 for UYUV and +3 for RGB
+	 *
+	 * So we add +1 to all horizontal and vertical register values,
+	 * plus an additional +3 for REFPIX as we are using RGB input only.
 	 */
-	ref_line = 2;
-
-	/* this might changes for other color formats from the CRTC: */
-	ref_pix = 3 + hs_start;
+	n_pix        = mode->htotal;
+	n_line       = mode->vtotal;
+
+	hs_pix_e     = mode->hsync_end - mode->hdisplay;
+	hs_pix_s     = mode->hsync_start - mode->hdisplay;
+	de_pix_e     = mode->htotal;
+	de_pix_s     = mode->htotal - mode->hdisplay;
+	ref_pix      = 3 + hs_pix_s;
+
+	if ((mode->flags & DRM_MODE_FLAG_INTERLACE) == 0) {
+		ref_line     = 1 + mode->vsync_start - mode->vdisplay;
+		vwin1_line_s = mode->vtotal - mode->vdisplay - 1;
+		vwin1_line_e = vwin1_line_s + mode->vdisplay;
+		vs1_pix_s    = vs1_pix_e = hs_pix_s;
+		vs1_line_s   = mode->vsync_start - mode->vdisplay;
+		vs1_line_e   = vs1_line_s +
+			       mode->vsync_end - mode->vsync_start;
+		vwin2_line_s = vwin2_line_e = 0;
+		vs2_pix_s    = vs2_pix_e  = 0;
+		vs2_line_s   = vs2_line_e = 0;
+	} else {
+		ref_line     = 1 + (mode->vsync_start - mode->vdisplay)/2;
+		vwin1_line_s = (mode->vtotal - mode->vdisplay)/2;
+		vwin1_line_e = vwin1_line_s + mode->vdisplay/2;
+		vs1_pix_s    = vs1_pix_e = hs_pix_s;
+		vs1_line_s   = (mode->vsync_start - mode->vdisplay)/2;
+		vs1_line_e   = vs1_line_s +
+			       (mode->vsync_end - mode->vsync_start)/2;
+		vwin2_line_s = vwin1_line_s + mode->vtotal/2;
+		vwin2_line_e = vwin2_line_s + mode->vdisplay/2;
+		vs2_pix_s    = vs2_pix_e = hs_pix_s + mode->htotal/2;
+		vs2_line_s   = vs1_line_s + mode->vtotal/2 ;
+		vs2_line_e   = vs2_line_s +
+			       (mode->vsync_end - mode->vsync_start)/2;
+	}
 
 	div = 148500 / mode->clock;
 
-	DBG("clock=%d, div=%u", mode->clock, div);
-	DBG("hs_start=%u, hs_end=%u, line_start=%u, line_end=%u",
-			hs_start, hs_end, line_start, line_end);
-	DBG("vwin_start=%u, vwin_end=%u, de_start=%u, de_end=%u",
-			vwin_start, vwin_end, de_start, de_end);
-	DBG("ref_line=%u, ref_pix=%u, pix_start2=%u",
-			ref_line, ref_pix, pix_start2);
-
 	/* mute the audio FIFO: */
 	reg_set(encoder, REG_AIP_CNTRL_0, AIP_CNTRL_0_RST_FIFO);
 
@@ -802,9 +841,6 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
 	reg_write(encoder, REG_PLL_SERIAL_2, PLL_SERIAL_2_SRL_NOSC(div) |
 			PLL_SERIAL_2_SRL_PR(rep));
 
-	reg_write16(encoder, REG_VS_PIX_STRT_2_MSB, pix_start2);
-	reg_write16(encoder, REG_VS_PIX_END_2_MSB, pix_start2);
-
 	/* set color matrix bypass flag: */
 	reg_set(encoder, REG_MAT_CONTRL, MAT_CONTRL_MAT_BP);
 
@@ -813,46 +849,59 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
 
 	reg_clear(encoder, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_MTHD);
 
+	/*
+	 * Sync on rising HSYNC/VSYNC
+	 */
 	reg_write(encoder, REG_VIP_CNTRL_3, 0);
 	reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_SYNC_HS);
+
+	/*
+	 * TDA19988 requires high-active sync at input stage,
+	 * so invert low-active sync provided by master encoder here
+	 */
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+		reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_H_TGL);
 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
 		reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_V_TGL);
 
+	/*
+	 * Always generate sync polarity relative to input sync and
+	 * revert input stage toggled sync at output stage
+	 */
+	reg = TBG_CNTRL_1_TGL_EN;
 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
-		reg_set(encoder, REG_VIP_CNTRL_3, VIP_CNTRL_3_H_TGL);
+		reg |= TBG_CNTRL_1_H_TGL;
+	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
+		reg |= TBG_CNTRL_1_V_TGL;
+	reg_write(encoder, REG_TBG_CNTRL_1, reg);
 
 	reg_write(encoder, REG_VIDFORMAT, 0x00);
-	reg_write16(encoder, REG_NPIX_MSB, mode->htotal);
-	reg_write16(encoder, REG_NLINE_MSB, mode->vtotal);
-	reg_write16(encoder, REG_VS_LINE_STRT_1_MSB, line_start);
-	reg_write16(encoder, REG_VS_LINE_END_1_MSB, line_end);
-	reg_write16(encoder, REG_VS_PIX_STRT_1_MSB, hs_start);
-	reg_write16(encoder, REG_VS_PIX_END_1_MSB, hs_start);
-	reg_write16(encoder, REG_HS_PIX_START_MSB, hs_start);
-	reg_write16(encoder, REG_HS_PIX_STOP_MSB, hs_end);
-	reg_write16(encoder, REG_VWIN_START_1_MSB, vwin_start);
-	reg_write16(encoder, REG_VWIN_END_1_MSB, vwin_end);
-	reg_write16(encoder, REG_DE_START_MSB, de_start);
-	reg_write16(encoder, REG_DE_STOP_MSB, de_end);
+	reg_write16(encoder, REG_REFPIX_MSB, ref_pix);
+	reg_write16(encoder, REG_REFLINE_MSB, ref_line);
+	reg_write16(encoder, REG_NPIX_MSB, n_pix);
+	reg_write16(encoder, REG_NLINE_MSB, n_line);
+	reg_write16(encoder, REG_VS_LINE_STRT_1_MSB, vs1_line_s);
+	reg_write16(encoder, REG_VS_PIX_STRT_1_MSB, vs1_pix_s);
+	reg_write16(encoder, REG_VS_LINE_END_1_MSB, vs1_line_e);
+	reg_write16(encoder, REG_VS_PIX_END_1_MSB, vs1_pix_e);
+	reg_write16(encoder, REG_VS_LINE_STRT_2_MSB, vs2_line_s);
+	reg_write16(encoder, REG_VS_PIX_STRT_2_MSB, vs2_pix_s);
+	reg_write16(encoder, REG_VS_LINE_END_2_MSB, vs2_line_e);
+	reg_write16(encoder, REG_VS_PIX_END_2_MSB, vs2_pix_e);
+	reg_write16(encoder, REG_HS_PIX_START_MSB, hs_pix_s);
+	reg_write16(encoder, REG_HS_PIX_STOP_MSB, hs_pix_e);
+	reg_write16(encoder, REG_VWIN_START_1_MSB, vwin1_line_s);
+	reg_write16(encoder, REG_VWIN_END_1_MSB, vwin1_line_e);
+	reg_write16(encoder, REG_VWIN_START_2_MSB, vwin2_line_s);
+	reg_write16(encoder, REG_VWIN_END_2_MSB, vwin2_line_e);
+	reg_write16(encoder, REG_DE_START_MSB, de_pix_s);
+	reg_write16(encoder, REG_DE_STOP_MSB, de_pix_e);
 
 	if (priv->rev == TDA19988) {
 		/* let incoming pixels fill the active space (if any) */
 		reg_write(encoder, REG_ENABLE_SPACE, 0x01);
 	}
 
-	reg_write16(encoder, REG_REFPIX_MSB, ref_pix);
-	reg_write16(encoder, REG_REFLINE_MSB, ref_line);
-
-	reg = TBG_CNTRL_1_DWIN_DIS | /* HDCP off */
-			TBG_CNTRL_1_VH_TGL_2;
-	/*
-	 * It is questionable whether this is correct - the nxp driver
-	 * does not set VH_TGL_2 and the below for all display modes.
-	 */
-	if (mode->flags & (DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC))
-		reg |= TBG_CNTRL_1_VH_TGL_0;
-	reg_set(encoder, REG_TBG_CNTRL_1, reg);
-
 	/* must be last register set: */
 	reg_clear(encoder, REG_TBG_CNTRL_0, TBG_CNTRL_0_SYNC_ONCE);
 
-- 
1.7.10.4

[PATCH v2 7/8] drm/i2c: tda998x: prepare for broken sync workaround

[Sebastian Hesselbarth]

Some LCD controller cannot provide valid VESA style sync, i.e. coincident
HS/VS edges. First, this patch adds hskew passed from the adjusted_mode to
reference pixel calculation to allow those controllers to add an offset
relative to the expected reference pixel.

Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Changelog:
for v1:
- reword comment

Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/gpu/drm/i2c/tda998x_drv.c |    8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index 92fcb3d..c2bd711 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -782,6 +782,14 @@ tda998x_encoder_mode_set(struct drm_encoder *encoder,
 	de_pix_s     = mode->htotal - mode->hdisplay;
 	ref_pix      = 3 + hs_pix_s;
 
+	/*
+	 * Attached LCD controllers may generate broken sync. Allow
+	 * those to adjust the position of the rising VS edge by adding
+	 * HSKEW to ref_pix.
+	 */
+	if (adjusted_mode->flags & DRM_MODE_FLAG_HSKEW)
+		ref_pix += adjusted_mode->hskew;
+
 	if ((mode->flags & DRM_MODE_FLAG_INTERLACE) == 0) {
 		ref_line     = 1 + mode->vsync_start - mode->vdisplay;
 		vwin1_line_s = mode->vtotal - mode->vdisplay - 1;
-- 
1.7.10.4

[PATCH v2 8/8] drm/tilcdc fixup mode to workaround sync for tda998x

[Sebastian Hesselbarth]

From: Darren Etheridge <detheridge@ti.com>

Add a fixup function that will flip the hsync priority and
add a hskew value that is used to shift the tda998x to the
right by a variable number of pixels depending on the mode.
This works around an issue with the sync timings that tilcdc
is outputing.

Signed-off-by: Darren Etheridge <detheridge@ti.com>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Changelog:
v1->v2:
- fix typo in commit line (s/workaound/workaround)

Cc: David Airlie <airlied@linux.ie>
Cc: Darren Etheridge <detheridge@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
---
 drivers/gpu/drm/tilcdc/tilcdc_crtc.c  |    7 ++++++-
 drivers/gpu/drm/tilcdc/tilcdc_slave.c |   27 ++++++++++++++++++++++++++-
 2 files changed, 32 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
index 7418dcd..6d05240 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_crtc.c
@@ -379,7 +379,12 @@ static int tilcdc_crtc_mode_set(struct drm_crtc *crtc,
 	else
 		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE);
 
-	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
+	/*
+	 * use value from adjusted_mode here as this might have been
+	 * changed as part of the fixup for slave encoders to solve the
+	 * issue where tilcdc timings are not VESA compliant
+	 */
+	if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC)
 		tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
 	else
 		tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC);
diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
index 0bf5999..f6e9c26 100644
--- a/drivers/gpu/drm/tilcdc/tilcdc_slave.c
+++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c
@@ -73,13 +73,38 @@ static void slave_encoder_prepare(struct drm_encoder *encoder)
 	tilcdc_crtc_set_panel_info(encoder->crtc, &slave_info);
 }
 
+static bool slave_encoder_fixup(struct drm_encoder *encoder,
+		const struct drm_display_mode *mode,
+		struct drm_display_mode *adjusted_mode)
+{
+	/*
+	 * tilcdc does not generate VESA-complient sync but aligns
+	 * VS on the second edge of HS instead of first edge.
+	 * We use adjusted_mode, to fixup sync by aligning both rising
+	 * edges and add HSKEW offset to let the slave encoder fix it up.
+	 */
+	adjusted_mode->hskew = mode->hsync_end - mode->hsync_start;
+	adjusted_mode->flags |= DRM_MODE_FLAG_HSKEW;
+
+	if (mode->flags & DRM_MODE_FLAG_NHSYNC) {
+		adjusted_mode->flags |= DRM_MODE_FLAG_PHSYNC;
+		adjusted_mode->flags &= ~DRM_MODE_FLAG_NHSYNC;
+	} else {
+		adjusted_mode->flags |= DRM_MODE_FLAG_NHSYNC;
+		adjusted_mode->flags &= ~DRM_MODE_FLAG_PHSYNC;
+	}
+
+	return drm_i2c_encoder_mode_fixup(encoder, mode, adjusted_mode);
+}
+
+
 static const struct drm_encoder_funcs slave_encoder_funcs = {
 		.destroy        = slave_encoder_destroy,
 };
 
 static const struct drm_encoder_helper_funcs slave_encoder_helper_funcs = {
 		.dpms           = drm_i2c_encoder_dpms,
-		.mode_fixup     = drm_i2c_encoder_mode_fixup,
+		.mode_fixup     = slave_encoder_fixup,
 		.prepare        = slave_encoder_prepare,
 		.commit         = drm_i2c_encoder_commit,
 		.mode_set       = drm_i2c_encoder_mode_set,
-- 
1.7.10.4

Re: [PATCH v2 0/8] Several NXP TDA998x patches

[Russell King - ARM Linux]

On Wed, Aug 14, 2013 at 09:43:25PM +0200, Sebastian Hesselbarth wrote:
> This patch set picks up several patches sent during the past months
> related with NXP TDA998x HDMI transmitter driver. The patches have
> been tested on Marvell Dove (Armada DRM) on several HDMI and DVI modes
> with audio playing on S/PDIF.
> 
> I bumped all patches to v2, although only patches 2, 5, and 6 have
> changed. I also fixed a typo in commit line of patch 8. As Darren
> Etheridge already gave his Tested-by and tilcdc related patches have
> not changed, I added it to all patches for v2, too.
> 
> I have not added Russell King's Tested-by, as I hope he will have a
> close look at what I changed after his review comments.
> 
> Darren Etheridge (1):
>   drm/tilcdc fixup mode to workaround sync for tda998x
> 
> Russell King (5):
>   drm/i2c: tda998x: fix EDID reading on TDA19988 devices
>   drm/i2c: tda998x: ensure VIP output mux is properly set
>   drm/i2c: tda998x: fix npix/nline programming
>   drm/i2c: tda998x: prepare for video input configuration
>   drm/i2c: tda998x: add video and audio input configuration
> 
> Sebastian Hesselbarth (2):
>   drm/i2c: tda998x: fix sync generation and calculation
>   drm/i2c: tda998x: prepare for broken sync workaround
> 
>  drivers/gpu/drm/i2c/tda998x_drv.c     |  481 +++++++++++++++++++++++++++------
>  drivers/gpu/drm/tilcdc/tilcdc_crtc.c  |    7 +-
>  drivers/gpu/drm/tilcdc/tilcdc_slave.c |   27 +-
>  include/drm/i2c/tda998x.h             |   30 ++
>  4 files changed, 467 insertions(+), 78 deletions(-)
>  create mode 100644 include/drm/i2c/tda998x.h
> 
> ---
> Cc: David Airlie <airlied@linux.ie>
> Cc: Darren Etheridge <detheridge@ti.com>
> Cc: Rob Clark <robdclark@gmail.com>
> Cc: Russell King <rmk+kernel@arm.linux.org.uk>
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-kernel@vger.kernel.org

Okay, I'm happy with this set.  Patches 1-7 can get a:

Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>

Thanks.