From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
stable@vger.kernel.org, Tejun Heo <tj@kernel.org>,
Fengguang Wu <fengguang.wu@intel.com>,
Dipankar Sarma <dipankar@in.ibm.com>,
"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>,
"David S. Miller" <davem@davemloft.net>,
Li Zefan <lizefan@huawei.com>, Patrick McHardy <kaber@trash.net>,
Josh Triplett <josh@joshtriplett.org>
Subject: [ 15/40] rculist: list_first_or_null_rcu() should use list_entry_rcu()
Date: Tue, 24 Sep 2013 17:11:47 -0700 [thread overview]
Message-ID: <20130925001043.606160853@linuxfoundation.org> (raw)
In-Reply-To: <20130925001041.939335518@linuxfoundation.org>
3.4-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tejun Heo <tj@kernel.org>
commit c34ac00caefbe49d40058ae7200bd58725cebb45 upstream.
list_first_or_null() should test whether the list is empty and return
pointer to the first entry if not in a RCU safe manner. It's broken
in several ways.
* It compares __kernel @__ptr with __rcu @__next triggering the
following sparse warning.
net/core/dev.c:4331:17: error: incompatible types in comparison expression (different address spaces)
* It doesn't perform rcu_dereference*() and computes the entry address
using container_of() directly from the __rcu pointer which is
inconsitent with other rculist interface. As a result, all three
in-kernel users - net/core/dev.c, macvlan, cgroup - are buggy. They
dereference the pointer w/o going through read barrier.
* While ->next dereference passes through list_next_rcu(), the
compiler is still free to fetch ->next more than once and thus
nullify the "__ptr != __next" condition check.
Fix it by making list_first_or_null_rcu() dereference ->next directly
using ACCESS_ONCE() and then use list_entry_rcu() on it like other
rculist accessors.
v2: Paul pointed out that the compiler may fetch the pointer more than
once nullifying the condition check. ACCESS_ONCE() added on
->next dereference.
v3: Restored () around macro param which was accidentally removed.
Spotted by Paul.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: Dipankar Sarma <dipankar@in.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
include/linux/rculist.h | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/include/linux/rculist.h
+++ b/include/linux/rculist.h
@@ -254,8 +254,9 @@ static inline void list_splice_init_rcu(
*/
#define list_first_or_null_rcu(ptr, type, member) \
({struct list_head *__ptr = (ptr); \
- struct list_head __rcu *__next = list_next_rcu(__ptr); \
- likely(__ptr != __next) ? container_of(__next, type, member) : NULL; \
+ struct list_head *__next = ACCESS_ONCE(__ptr->next); \
+ likely(__ptr != __next) ? \
+ list_entry_rcu(__next, type, member) : NULL; \
})
/**
next prev parent reply other threads:[~2013-09-25 1:29 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-25 0:11 [ 00/40] 3.4.63-stable review Greg Kroah-Hartman
2013-09-25 0:11 ` [ 01/40] SCSI: sd: Fix potential out-of-bounds access Greg Kroah-Hartman
2013-09-25 0:11 ` [ 02/40] crypto: api - Fix race condition in larval lookup Greg Kroah-Hartman
2013-09-25 0:11 ` [ 03/40] powerpc: Handle unaligned ldbrx/stdbrx Greg Kroah-Hartman
2013-09-25 0:11 ` [ 04/40] xen-gnt: prevent adding duplicate gnt callbacks Greg Kroah-Hartman
2013-09-25 0:11 ` [ 05/40] ARM: PCI: versatile: Fix SMAP register offsets Greg Kroah-Hartman
2013-09-25 0:11 ` [ 06/40] xhci-plat: Dont enable legacy PCI interrupts Greg Kroah-Hartman
2013-09-25 0:11 ` [ 07/40] usb: xhci: Disable runtime PM suspend for quirky controllers Greg Kroah-Hartman
2013-09-25 0:11 ` [ 08/40] cifs: ensure that srv_mutex is held when dealing with ssocket pointer Greg Kroah-Hartman
2013-09-25 0:11 ` [ 09/40] staging: comedi: dt282x: dt282x_ai_insn_read() always fails Greg Kroah-Hartman
2013-09-25 0:11 ` [ 10/40] USB: mos7720: use GFP_ATOMIC under spinlock Greg Kroah-Hartman
2013-09-25 0:11 ` [ 11/40] USB: mos7720: fix big-endian control requests Greg Kroah-Hartman
2013-09-25 0:11 ` [ 12/40] usb: ehci-mxc: check for pdata before dereferencing Greg Kroah-Hartman
2013-09-25 0:11 ` [ 13/40] USB: cdc-wdm: fix race between interrupt handler and tasklet Greg Kroah-Hartman
2013-09-25 0:11 ` [ 14/40] usb: config->desc.bLength may not exceed amount of data returned by the device Greg Kroah-Hartman
2013-09-25 0:11 ` Greg Kroah-Hartman [this message]
2013-09-25 0:11 ` [ 16/40] ASoC: wm8960: Fix PLL register writes Greg Kroah-Hartman
2013-09-25 0:11 ` [ 17/40] ALSA: hda - Add Toshiba Satellite C870 to MSI blacklist Greg Kroah-Hartman
2013-09-25 0:11 ` [ 18/40] brcmsmac: Fix WARNING caused by lack of calls to dma_mapping_error() Greg Kroah-Hartman
2013-09-25 0:11 ` [ 19/40] ath9k: always clear ps filter bit on new assoc Greg Kroah-Hartman
2013-09-25 0:11 ` [ 20/40] ath9k: fix rx descriptor related race condition Greg Kroah-Hartman
2013-09-25 0:11 ` [ 21/40] ath9k: avoid accessing MRC registers on single-chain devices Greg Kroah-Hartman
2013-09-25 0:11 ` [ 22/40] HID: pantherlord: validate output report details Greg Kroah-Hartman
2013-09-25 0:11 ` [ 23/40] HID: Fix Speedlink VAD Cezanne support for some devices Greg Kroah-Hartman
2013-09-25 0:11 ` [ 24/40] HID: validate HID report id size Greg Kroah-Hartman
2013-09-25 0:11 ` [ 25/40] HID: ntrig: validate feature report details Greg Kroah-Hartman
2013-09-25 0:11 ` [ 26/40] HID: battery: dont do DMA from stack Greg Kroah-Hartman
2013-09-25 0:11 ` [ 27/40] HID: check for NULL field when setting values Greg Kroah-Hartman
2013-09-25 0:12 ` [ 28/40] HID: usbhid: quirk for N-Trig DuoSense Touch Screen Greg Kroah-Hartman
2013-09-25 0:12 ` [ 29/40] media: v4l2: added missing mutex.h include to v4l2-ctrls.h Greg Kroah-Hartman
2013-09-25 0:12 ` [ 30/40] MIPS: ath79: Fix ar933x watchdog clock Greg Kroah-Hartman
2013-09-25 0:12 ` [ 31/40] intel-iommu: Fix leaks in pagetable freeing Greg Kroah-Hartman
2013-09-25 0:12 ` [ 32/40] ocfs2: fix the end cluster offset of FIEMAP Greg Kroah-Hartman
2013-09-25 0:12 ` [ 33/40] memcg: fix multiple large threshold notifications Greg Kroah-Hartman
2013-09-25 0:12 ` [ 34/40] mm/huge_memory.c: fix potential NULL pointer dereference Greg Kroah-Hartman
2013-09-25 0:12 ` [ 35/40] isofs: Refuse RW mount of the filesystem instead of making it RO Greg Kroah-Hartman
2013-09-25 0:12 ` [ 36/40] drm/edid: add quirk for Medion MD30217PG Greg Kroah-Hartman
2013-09-25 0:12 ` [ 37/40] mmc: tmio_mmc_dma: fix PIO fallback on SDHI Greg Kroah-Hartman
2013-09-25 0:12 ` [ 38/40] of: Fix missing memory initialization on FDT unflattening Greg Kroah-Hartman
2013-09-25 0:12 ` [ 39/40] fuse: postpone end_page_writeback() in fuse_writepage_locked() Greg Kroah-Hartman
2013-09-25 0:12 ` [ 40/40] fuse: invalidate inode attributes on xattr modification Greg Kroah-Hartman
2013-09-25 4:35 ` [ 00/40] 3.4.63-stable review Guenter Roeck
2013-09-26 1:09 ` Greg Kroah-Hartman
2013-09-26 2:24 ` Shuah Khan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130925001043.606160853@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=davem@davemloft.net \
--cc=dipankar@in.ibm.com \
--cc=fengguang.wu@intel.com \
--cc=josh@joshtriplett.org \
--cc=kaber@trash.net \
--cc=linux-kernel@vger.kernel.org \
--cc=lizefan@huawei.com \
--cc=paulmck@linux.vnet.ibm.com \
--cc=stable@vger.kernel.org \
--cc=tj@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox