public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Henrik Rydberg <rydberg@euromail.se>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Josh Boyer <jwboyer@fedoraproject.org>,
	khali@linux-fr.org, lm-sensors@lm-sensors.org,
	"Linux-Kernel@Vger. Kernel. Org" <linux-kernel@vger.kernel.org>,
	bugzilla@colorremedies.com
Subject: Re: applesmc oops in 3.10/3.11
Date: Thu, 26 Sep 2013 08:34:53 +0200	[thread overview]
Message-ID: <20130926063453.GA526@polaris.bitmath.org> (raw)
In-Reply-To: <20130925220838.GB4184@roeck-us.net>

> > > This suggests that initialization may be attempted more than once. The key cache
> > > is allocated only once, but the number of keys is read for each attempt.
> > > 
> > > No idea if that can happen, but if the number of keys can increase after
> > > the first initialization attempt you would have an explanation for the crash.
> > 
> > Good idea, and easy enough to test with the patch below.
> > 
> Should we apply this patch even though it may not solve the specific problem ?

Yes, why not - it certainly won't hurt. I am running it right now, so
it is at least run-tested.

> Again, not sure if the key count can change, but the current code is at the very
> least inconsistent, as it keeps reading the key count without updating or
> verifying the cache size.

Yes - I agree that the error state is far-fetched, but it is hard to
see any other logical explanation. There is of course always the
possibility that the problem is somewhere else completely.

Proper patch attached.

Thanks,
Henrik

---

>From dedefba9167913c46e1896ce0624e68ffe95d532 Mon Sep 17 00:00:00 2001
From: Henrik Rydberg <rydberg@euromail.se>
Date: Thu, 26 Sep 2013 08:33:16 +0200
Subject: [PATCH] hwmon: (applesmc) Check key count before proceeding

After reports from Chris and Josh Boyer of a rare crash in applesmc,
Guenter pointed at the initialization problem fixed below. The patch
has not been verified to fix the crash, but should be applied
regardless.

Reported-by: <jwboyer@fedoraproject.org>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
---
 drivers/hwmon/applesmc.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 62c2e32..98814d1 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -525,16 +525,25 @@ static int applesmc_init_smcreg_try(void)
 {
 	struct applesmc_registers *s = &smcreg;
 	bool left_light_sensor, right_light_sensor;
+	unsigned int count;
 	u8 tmp[1];
 	int ret;
 
 	if (s->init_complete)
 		return 0;
 
-	ret = read_register_count(&s->key_count);
+	ret = read_register_count(&count);
 	if (ret)
 		return ret;
 
+	if (s->cache && s->key_count != count) {
+		pr_warn("key count changed from %d to %d\n",
+			s->key_count, count);
+		kfree(s->cache);
+		s->cache = NULL;
+	}
+	s->key_count = count;
+
 	if (!s->cache)
 		s->cache = kcalloc(s->key_count, sizeof(*s->cache), GFP_KERNEL);
 	if (!s->cache)
-- 
1.8.3.4


  reply	other threads:[~2013-09-26  6:33 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-09-25 19:06 applesmc oops in 3.10/3.11 Josh Boyer
2013-09-25 19:56 ` Guenter Roeck
2013-09-25 21:48   ` Henrik Rydberg
2013-09-25 22:08     ` Guenter Roeck
2013-09-26  6:34       ` Henrik Rydberg [this message]
2013-09-26 10:36         ` Guenter Roeck
2013-09-26 11:13           ` Henrik Rydberg
2013-09-26 10:53         ` Guenter Roeck
2013-09-26 11:11           ` Henrik Rydberg
2013-09-27 16:21         ` Josh Boyer
2013-09-27 17:12           ` Guenter Roeck
2013-09-27 17:41             ` Chris Murphy
2013-09-27 17:59               ` Guenter Roeck
2013-09-27 18:03                 ` Chris Murphy
2013-09-27 23:33                   ` Guenter Roeck
2013-10-01  1:57                     ` Chris Murphy
2013-10-01  3:37                       ` Guenter Roeck
2013-10-01 10:55                         ` Henrik Rydberg
2013-10-01 15:19                           ` Guenter Roeck
2013-10-01 15:33                             ` Chris Murphy
2013-10-01 16:24                               ` Guenter Roeck
2013-10-02  1:09                                 ` Chris Murphy
2013-10-02  3:51                                   ` Guenter Roeck
2013-10-02  3:55                                     ` Chris Murphy
2013-10-02  4:02                                       ` Guenter Roeck
2013-10-02  9:53                                     ` Henrik Rydberg
2013-10-02 13:30                                       ` Guenter Roeck
2013-10-02 16:34                                         ` Henrik Rydberg
2013-10-02 16:47                                           ` Guenter Roeck
2013-10-02 17:24                                             ` Henrik Rydberg
2013-10-02 18:02                                               ` Guenter Roeck
2013-10-02 18:33                                                 ` Chris Murphy
2013-10-02 20:59                                                   ` Guenter Roeck
2013-10-02 21:34                                                     ` Chris Murphy
2013-10-02 23:32                                                       ` Guenter Roeck
2013-10-07 23:42                                               ` Guenter Roeck
2013-10-07 23:46                                                 ` Chris Murphy
2013-10-08 15:48                                                   ` Guenter Roeck
2013-10-08 16:29                                                     ` Henrik Rydberg
2013-10-08 16:29                                                       ` Guenter Roeck
2013-10-09  8:29                                                         ` Henrik Rydberg
2013-10-09 16:52                                                           ` Guenter Roeck
2013-09-27 18:01           ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130926063453.GA526@polaris.bitmath.org \
    --to=rydberg@euromail.se \
    --cc=bugzilla@colorremedies.com \
    --cc=jwboyer@fedoraproject.org \
    --cc=khali@linux-fr.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=lm-sensors@lm-sensors.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox