linux-kernel.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
To: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>,
	Mel Gorman <mgorman@suse.de>, Rik van Riel <riel@redhat.com>,
	Srikar Dronamraju <srikar@linux.vnet.ibm.com>,
	Ingo Molnar <mingo@kernel.org>,
	Andrea Arcangeli <aarcange@redhat.com>,
	Johannes Weiner <hannes@cmpxchg.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Steven Rostedt <rostedt@goodmis.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/3] rcu: Create rcu_sync infrastructure
Date: Thu, 3 Oct 2013 12:21:35 -0700	[thread overview]
Message-ID: <20131003192135.GR5790@linux.vnet.ibm.com> (raw)
In-Reply-To: <20131003184719.GA11996@redhat.com>

On Thu, Oct 03, 2013 at 08:47:19PM +0200, Oleg Nesterov wrote:
> On 10/03, Peter Zijlstra wrote:
> >
> > On Thu, Oct 03, 2013 at 09:41:17AM -0700, Paul E. McKenney wrote:
> > > On Wed, Oct 02, 2013 at 04:56:57PM +0200, Peter Zijlstra wrote:
> > > #ifdef CONFIG_PROVE_RCU
> > > #define rcu_sync_is_idle_check(rss) BUG_ON(!rss->read_side_check())
> > > #else
> > > #define rcu_sync_is_idle_check(rss) do { } while (0)
> > > #endif
> > >
> > > 	rcu_sync_is_idle_check(rss);
> >
> > The below actually seems to build, although I didn't test the config
> > permutations, only defconfig.
> 
> Yes, but...
> 
> I think it would be better to start with the patch below, this way
> it would be easier a) to add the new ops (we need more anyway) and b)
> use CONFIG_PROVE_RCU to avoid the unused members even if this is
> really minor.

I am fine with this as well, but I don't see the code that checks for
the required RCU read-side critical section.

							Thanx, Paul

> Oleg.
> 
> rcusync: introdude struct rcu_sync_ops
> 
> CHANGELOG
> 
> ---
>  include/linux/rcusync.h |   63 +++++++++++++++++++++--------------------------
>  kernel/rcusync.c        |   40 ++++++++++++++---------------
>  2 files changed, 47 insertions(+), 56 deletions(-)
> 
> diff --git a/include/linux/rcusync.h b/include/linux/rcusync.h
> index 7858491..30c6037 100644
> --- a/include/linux/rcusync.h
> +++ b/include/linux/rcusync.h
> @@ -4,6 +4,11 @@
>  #include <linux/wait.h>
>  #include <linux/rcupdate.h>
> 
> +struct rcu_sync_ops {
> +	void (*sync)(void);
> +	void (*call)(struct rcu_head *, void (*)(struct rcu_head *));
> +};
> +
>  struct rcu_sync_struct {
>  	int			gp_state;
>  	int			gp_count;
> @@ -12,43 +17,9 @@ struct rcu_sync_struct {
>  	int			cb_state;
>  	struct rcu_head		cb_head;
> 
> -	void (*sync)(void);
> -	void (*call)(struct rcu_head *, void (*)(struct rcu_head *));
> +	struct rcu_sync_ops	*ops;
>  };
> 
> -#define ___RCU_SYNC_INIT(name)						\
> -	.gp_state = 0,							\
> -	.gp_count = 0,							\
> -	.gp_wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.gp_wait),		\
> -	.cb_state = 0
> -
> -#define __RCU_SCHED_SYNC_INIT(name) {					\
> -	___RCU_SYNC_INIT(name),						\
> -	.sync = synchronize_sched,					\
> -	.call = call_rcu_sched,						\
> -}
> -
> -#define __RCU_BH_SYNC_INIT(name) {					\
> -	___RCU_SYNC_INIT(name),						\
> -	.sync = synchronize_rcu_bh,					\
> -	.call = call_rcu_bh,						\
> -}
> -
> -#define __RCU_SYNC_INIT(name) {						\
> -	___RCU_SYNC_INIT(name),						\
> -	.sync = synchronize_rcu,					\
> -	.call = call_rcu,						\
> -}
> -
> -#define DEFINE_RCU_SCHED_SYNC(name)					\
> -	struct rcu_sync_struct name = __RCU_SCHED_SYNC_INIT(name)
> -
> -#define DEFINE_RCU_BH_SYNC(name)					\
> -	struct rcu_sync_struct name = __RCU_BH_SYNC_INIT(name)
> -
> -#define DEFINE_RCU_SYNC(name)						\
> -	struct rcu_sync_struct name = __RCU_SYNC_INIT(name)
> -
>  static inline bool rcu_sync_is_idle(struct rcu_sync_struct *rss)
>  {
>  	return !rss->gp_state; /* GP_IDLE */
> @@ -60,5 +31,27 @@ extern void rcu_sync_init(struct rcu_sync_struct *, enum rcu_sync_type);
>  extern void rcu_sync_enter(struct rcu_sync_struct *);
>  extern void rcu_sync_exit(struct rcu_sync_struct *);
> 
> +extern struct rcu_sync_ops rcu_sync_ops_array[];
> +
> +#define __RCU_SYNC_INITIALIZER(name, type) {				\
> +		.gp_state = 0,						\
> +		.gp_count = 0,						\
> +		.gp_wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.gp_wait),	\
> +		.cb_state = 0,						\
> +		.ops = rcu_sync_ops_array + (type),			\
> +	}
> +
> +#define	__DEFINE_RCU_SYNC(name, type)	\
> +	struct rcu_sync_struct name = __RCU_SYNC_INITIALIZER(name, type)
> +
> +#define DEFINE_RCU_SYNC(name)		\
> +	__DEFINE_RCU_SYNC(name, RCU_SYNC)
> +
> +#define DEFINE_RCU_SCHED_SYNC(name)	\
> +	__DEFINE_RCU_SYNC(name, RCU_SCHED_SYNC)
> +
> +#define DEFINE_RCU_BH_SYNC(name)	\
> +	__DEFINE_RCU_SYNC(name, RCU_BH_SYNC)
> +
>  #endif /* _LINUX_RCUSYNC_H_ */
> 
> diff --git a/kernel/rcusync.c b/kernel/rcusync.c
> index f84176a..1cefb83 100644
> --- a/kernel/rcusync.c
> +++ b/kernel/rcusync.c
> @@ -1,4 +1,3 @@
> -
>  #include <linux/rcusync.h>
>  #include <linux/sched.h>
> 
> @@ -7,27 +6,26 @@ enum { CB_IDLE = 0, CB_PENDING, CB_REPLAY };
> 
>  #define	rss_lock	gp_wait.lock
> 
> +struct rcu_sync_ops rcu_sync_ops_array[] = {
> +	[RCU_SYNC] = {
> +		.sync = synchronize_rcu,
> +		.call = call_rcu,
> +	},
> +	[RCU_SCHED_SYNC] = {
> +		.sync = synchronize_sched,
> +		.call = call_rcu_sched,
> +	},
> +	[RCU_BH_SYNC] = {
> +		.sync = synchronize_rcu_bh,
> +		.call = call_rcu_bh,
> +	},
> +};
> +
>  void rcu_sync_init(struct rcu_sync_struct *rss, enum rcu_sync_type type)
>  {
>  	memset(rss, 0, sizeof(*rss));
>  	init_waitqueue_head(&rss->gp_wait);
> -
> -	switch (type) {
> -	case RCU_SYNC:
> -		rss->sync = synchronize_rcu;
> -		rss->call = call_rcu;
> -		break;
> -
> -	case RCU_SCHED_SYNC:
> -		rss->sync = synchronize_sched;
> -		rss->call = call_rcu_sched;
> -		break;
> -
> -	case RCU_BH_SYNC:
> -		rss->sync = synchronize_rcu_bh;
> -		rss->call = call_rcu_bh;
> -		break;
> -	}
> +	rss->ops = rcu_sync_ops_array + type;
>  }
> 
>  void rcu_sync_enter(struct rcu_sync_struct *rss)
> @@ -44,7 +42,7 @@ void rcu_sync_enter(struct rcu_sync_struct *rss)
>  	BUG_ON(need_wait && need_sync);
> 
>  	if (need_sync) {
> -		rss->sync();
> +		rss->ops->sync();
>  		rss->gp_state = GP_PASSED;
>  		wake_up_all(&rss->gp_wait);
>  	} else if (need_wait) {
> @@ -81,7 +79,7 @@ static void rcu_sync_func(struct rcu_head *rcu)
>  		 * to catch a later GP.
>  		 */
>  		rss->cb_state = CB_PENDING;
> -		rss->call(&rss->cb_head, rcu_sync_func);
> +		rss->ops->call(&rss->cb_head, rcu_sync_func);
>  	} else {
>  		/*
>  		 * We're at least a GP after rcu_sync_exit(); eveybody will now
> @@ -99,7 +97,7 @@ void rcu_sync_exit(struct rcu_sync_struct *rss)
>  	if (!--rss->gp_count) {
>  		if (rss->cb_state == CB_IDLE) {
>  			rss->cb_state = CB_PENDING;
> -			rss->call(&rss->cb_head, rcu_sync_func);
> +			rss->ops->call(&rss->cb_head, rcu_sync_func);
>  		} else if (rss->cb_state == CB_PENDING) {
>  			rss->cb_state = CB_REPLAY;
>  		}
> 


  reply	other threads:[~2013-10-03 19:21 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-02 14:56 [PATCH 0/3] Optimize the cpu hotplug locking Peter Zijlstra
2013-10-02 14:56 ` [PATCH 1/3] hotplug: Optimize {get,put}_online_cpus() Peter Zijlstra
2013-10-03 14:01   ` Peter Zijlstra
2013-10-03 16:27     ` Paul E. McKenney
2013-10-03 16:26   ` Paul E. McKenney
2013-10-02 14:56 ` [PATCH 2/3] rcu: Create rcu_sync infrastructure Peter Zijlstra
2013-10-02 15:49   ` Oleg Nesterov
2013-10-03 16:42     ` Paul E. McKenney
2013-10-08  8:18     ` Peter Zijlstra
2013-10-03 16:41   ` Paul E. McKenney
2013-10-03 17:00     ` Oleg Nesterov
2013-10-03 17:15       ` Paul E. McKenney
2013-10-03 18:40     ` Peter Zijlstra
2013-10-03 18:45       ` Paul E. McKenney
2013-10-03 18:47       ` Oleg Nesterov
2013-10-03 19:21         ` Paul E. McKenney [this message]
2013-10-03 19:32           ` Oleg Nesterov
2013-10-03 19:33             ` Oleg Nesterov
2013-10-03 19:50               ` Paul E. McKenney
2013-10-03 20:00                 ` Oleg Nesterov
2013-10-03 21:10                   ` Oleg Nesterov
2013-10-03 22:00                     ` Paul E. McKenney
2013-10-04 11:29                       ` Oleg Nesterov
2013-10-04 16:22                         ` Paul E. McKenney
2013-10-04  7:18                     ` Peter Zijlstra
2013-10-04 11:15                       ` Oleg Nesterov
2013-10-04 11:36                         ` Peter Zijlstra
2013-10-04 11:50                           ` Oleg Nesterov
2013-10-04 11:44                         ` Peter Zijlstra
2013-10-04 12:13                           ` Oleg Nesterov
2013-10-04 12:38                             ` Peter Zijlstra
2013-10-04 13:31                               ` Oleg Nesterov
2013-10-04 14:43                                 ` Peter Zijlstra
2013-10-04 15:13                                   ` Oleg Nesterov
2013-10-04 16:25                                     ` Peter Zijlstra
2013-10-04 19:06                                       ` Oleg Nesterov
2013-10-04 19:41                                         ` Peter Zijlstra
2013-10-05 17:31                                           ` Oleg Nesterov
2013-10-04  7:00                   ` Peter Zijlstra
2013-10-03 20:14       ` Paolo Bonzini
2013-10-04  7:01         ` Peter Zijlstra
2013-10-02 14:56 ` [PATCH 3/3] hotplug: Optimize cpu_hotplug_{begin,done}() using rcu_sync Peter Zijlstra
2013-10-03 16:48   ` Paul E. McKenney
2013-10-03 18:41     ` Peter Zijlstra
2013-10-03 18:46       ` Paul E. McKenney
2013-10-03 19:05       ` Oleg Nesterov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131003192135.GR5790@linux.vnet.ibm.com \
    --to=paulmck@linux.vnet.ibm.com \
    --cc=aarcange@redhat.com \
    --cc=hannes@cmpxchg.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mgorman@suse.de \
    --cc=mingo@kernel.org \
    --cc=oleg@redhat.com \
    --cc=peterz@infradead.org \
    --cc=riel@redhat.com \
    --cc=rostedt@goodmis.org \
    --cc=srikar@linux.vnet.ibm.com \
    --cc=tglx@linutronix.de \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).